diff options
Diffstat (limited to 'src/qt/locale/bitcoin_en.ts')
| -rw-r--r-- | src/qt/locale/bitcoin_en.ts | 843 |
1 files changed, 459 insertions, 384 deletions
diff --git a/src/qt/locale/bitcoin_en.ts b/src/qt/locale/bitcoin_en.ts index fbff2d36a0..bff7469071 100644 --- a/src/qt/locale/bitcoin_en.ts +++ b/src/qt/locale/bitcoin_en.ts @@ -59,7 +59,7 @@ <translation>&Delete</translation> </message> <message> - <location filename="../addressbookpage.cpp" line="+85"/> + <location filename="../addressbookpage.cpp" line="+84"/> <source>Choose the address to send coins to</source> <translation type="unfinished"></translation> </message> @@ -90,7 +90,7 @@ </message> <message> <location line="+5"/> - <source>These are your Bitcoin addresses for receiving payments. It is recommended to use a new receiving address for each transaction.</source> + <source>These are your Bitcoin addresses for receiving payments. Use the 'Create new receiving address' button in the receive tab to create new addresses.</source> <translation type="unfinished"></translation> </message> <message> @@ -132,7 +132,7 @@ <context> <name>AddressTableModel</name> <message> - <location filename="../addresstablemodel.cpp" line="+164"/> + <location filename="../addresstablemodel.cpp" line="+163"/> <source>Label</source> <translation type="unfinished"></translation> </message> @@ -237,7 +237,7 @@ </message> <message> <location line="-56"/> - <source>%1 will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer.</source> + <source>Your wallet is now encrypted. Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer.</source> <translation type="unfinished"></translation> </message> <message> @@ -246,32 +246,33 @@ <translation type="unfinished"></translation> </message> <message> - <location line="+9"/> + <location line="+8"/> <location line="+7"/> - <location line="+42"/> + <location line="+43"/> <location line="+6"/> <source>Wallet encryption failed</source> <translation type="unfinished"></translation> </message> <message> - <location line="-54"/> + <location line="-55"/> <source>Wallet encryption failed due to an internal error. Your wallet was not encrypted.</source> <translation type="unfinished"></translation> </message> <message> <location line="+7"/> - <location line="+48"/> + <location line="+49"/> <source>The supplied passphrases do not match.</source> <translation type="unfinished"></translation> </message> <message> - <location line="-37"/> + <location line="-38"/> + <location line="+6"/> <source>Wallet unlock failed</source> <translation type="unfinished"></translation> </message> <message> - <location line="+1"/> - <location line="+11"/> + <location line="-5"/> + <location line="+12"/> <location line="+19"/> <source>The passphrase entered for the wallet decryption was incorrect.</source> <translation type="unfinished"></translation> @@ -296,7 +297,7 @@ <context> <name>BanTableModel</name> <message> - <location filename="../bantablemodel.cpp" line="+88"/> + <location filename="../bantablemodel.cpp" line="+86"/> <source>IP/Netmask</source> <translation type="unfinished"></translation> </message> @@ -309,27 +310,22 @@ <context> <name>BitcoinGUI</name> <message> - <location filename="../bitcoingui.cpp" line="+307"/> + <location filename="../bitcoingui.cpp" line="+318"/> <source>Sign &message...</source> <translation>Sign &message...</translation> </message> <message> - <location line="+483"/> + <location line="+638"/> <source>Synchronizing with network...</source> <translation>Synchronizing with network...</translation> </message> <message> - <location line="-561"/> + <location line="-716"/> <source>&Overview</source> <translation>&Overview</translation> </message> <message> - <location line="-140"/> - <source>Node</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+141"/> + <location line="+1"/> <source>Show general overview of wallet</source> <translation>Show general overview of wallet</translation> </message> @@ -399,32 +395,17 @@ <translation>&Change Passphrase...</translation> </message> <message> - <location line="+12"/> - <source>&Sending addresses...</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+2"/> - <source>&Receiving addresses...</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+3"/> + <location line="+18"/> <source>Open &URI...</source> <translation type="unfinished"></translation> </message> <message> - <location line="+104"/> + <location line="+217"/> <source>Wallet:</source> <translation type="unfinished"></translation> </message> <message> - <location line="+83"/> - <source>default wallet</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+226"/> + <location line="+334"/> <source>Click to disable network activity.</source> <translation type="unfinished"></translation> </message> @@ -444,17 +425,17 @@ <translation type="unfinished"></translation> </message> <message> - <location line="+37"/> + <location line="+53"/> <source>Reindexing blocks on disk...</source> <translation>Reindexing blocks on disk...</translation> </message> <message> - <location line="+316"/> + <location line="+317"/> <source>Proxy is <b>enabled</b>: %1</source> <translation type="unfinished"></translation> </message> <message> - <location line="-880"/> + <location line="-1036"/> <source>Send coins to a Bitcoin address</source> <translation>Send coins to a Bitcoin address</translation> </message> @@ -484,17 +465,7 @@ <translation>&Verify message...</translation> </message> <message> - <location line="+570"/> - <source>Bitcoin</source> - <translation>Bitcoin</translation> - </message> - <message> - <location line="-792"/> - <source>Wallet</source> - <translation>Wallet</translation> - </message> - <message> - <location line="+149"/> + <location line="-73"/> <source>&Send</source> <translation>&Send</translation> </message> @@ -529,7 +500,7 @@ <translation>Verify messages to ensure they were signed with specified Bitcoin addresses</translation> </message> <message> - <location line="+58"/> + <location line="+118"/> <source>&File</source> <translation>&File</translation> </message> @@ -539,22 +510,22 @@ <translation>&Settings</translation> </message> <message> - <location line="+9"/> + <location line="+66"/> <source>&Help</source> <translation>&Help</translation> </message> <message> - <location line="+15"/> + <location line="+11"/> <source>Tabs toolbar</source> <translation>Tabs toolbar</translation> </message> <message> - <location line="-158"/> + <location line="-271"/> <source>Request payments (generates QR codes and bitcoin: URIs)</source> <translation type="unfinished"></translation> </message> <message> - <location line="+70"/> + <location line="+71"/> <source>Show the list of used sending addresses and labels</source> <translation type="unfinished"></translation> </message> @@ -569,12 +540,12 @@ <translation type="unfinished"></translation> </message> <message> - <location line="+2"/> + <location line="+10"/> <source>&Command-line options</source> <translation type="unfinished"></translation> </message> <message numerus="yes"> - <location line="+410"/> + <location line="+540"/> <source>%n active connection(s) to Bitcoin network</source> <translation> <numerusform>%n active connection to Bitcoin network</numerusform> @@ -582,7 +553,7 @@ </translation> </message> <message> - <location line="+60"/> + <location line="+76"/> <source>Indexing blocks on disk...</source> <translation type="unfinished"></translation> </message> @@ -600,7 +571,7 @@ </translation> </message> <message> - <location line="+24"/> + <location line="+23"/> <source>%1 behind</source> <translation>%1 behind</translation> </message> @@ -615,47 +586,132 @@ <translation>Transactions after this will not yet be visible.</translation> </message> <message> - <location line="+27"/> + <location line="+28"/> <source>Error</source> <translation>Error</translation> </message> <message> - <location line="+3"/> + <location line="+4"/> <source>Warning</source> <translation>Warning</translation> </message> <message> - <location line="+3"/> + <location line="+4"/> <source>Information</source> <translation>Information</translation> </message> <message> - <location line="-78"/> + <location line="-81"/> <source>Up to date</source> <translation>Up to date</translation> </message> <message> - <location line="-494"/> + <location line="-657"/> + <source>&Sending addresses</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+2"/> + <source>&Receiving addresses</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+6"/> + <source>Open Wallet</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+2"/> + <source>Open a wallet</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+3"/> + <source>Close Wallet...</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+1"/> + <source>Close wallet</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+4"/> <source>Show the %1 help message to get a list with possible Bitcoin command-line options</source> <translation type="unfinished"></translation> </message> <message> - <location line="+253"/> + <location line="+30"/> + <source>default wallet</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+13"/> + <source>Opening Wallet <b>%1</b>...</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+9"/> + <source>Open Wallet Failed</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+15"/> + <source>No wallets available</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+48"/> + <source>&Window</source> + <translation type="unfinished">&Window</translation> + </message> + <message> + <location line="+2"/> + <source>Minimize</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+10"/> + <source>Zoom</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+14"/> + <source>Restore</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+12"/> + <source>Main Window</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+232"/> <source>%1 client</source> <translation type="unfinished"></translation> </message> <message> - <location line="+227"/> + <location line="+241"/> <source>Connecting to peers...</source> <translation type="unfinished"></translation> </message> <message> - <location line="+38"/> + <location line="+37"/> <source>Catching up...</source> <translation>Catching up...</translation> </message> <message> - <location line="+151"/> + <location line="+50"/> + <source>Error: %1</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+4"/> + <source>Warning: %1</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+99"/> <source>Date: %1 </source> <translation type="unfinished"></translation> @@ -711,6 +767,11 @@ <translation type="unfinished"></translation> </message> <message> + <location line="+0"/> + <source>Private key <b>disabled</b></source> + <translation type="unfinished"></translation> + </message> + <message> <location line="+19"/> <source>Wallet is <b>encrypted</b> and currently <b>unlocked</b></source> <translation>Wallet is <b>encrypted</b> and currently <b>unlocked</b></translation> @@ -721,7 +782,7 @@ <translation>Wallet is <b>encrypted</b> and currently <b>locked</b></translation> </message> <message> - <location filename="../bitcoin.cpp" line="+529"/> + <location filename="../bitcoin.cpp" line="+390"/> <source>A fatal error occurred. Bitcoin can no longer continue safely and will quit.</source> <translation type="unfinished"></translation> </message> @@ -814,7 +875,7 @@ <translation type="unfinished">Confirmed</translation> </message> <message> - <location filename="../coincontroldialog.cpp" line="+53"/> + <location filename="../coincontroldialog.cpp" line="+54"/> <source>Copy address</source> <translation type="unfinished"></translation> </message> @@ -875,7 +936,7 @@ <translation type="unfinished"></translation> </message> <message> - <location line="+315"/> + <location line="+313"/> <source>(%1 locked)</source> <translation type="unfinished"></translation> </message> @@ -987,7 +1048,7 @@ <context> <name>FreespaceChecker</name> <message> - <location filename="../intro.cpp" line="+77"/> + <location filename="../intro.cpp" line="+73"/> <source>A new data directory will be created.</source> <translation>A new data directory will be created.</translation> </message> @@ -1015,7 +1076,7 @@ <context> <name>HelpMessageDialog</name> <message> - <location filename="../utilitydialog.cpp" line="+41"/> + <location filename="../utilitydialog.cpp" line="+39"/> <source>version</source> <translation type="unfinished">version</translation> </message> @@ -1079,7 +1140,7 @@ <translation>Use a custom data directory:</translation> </message> <message> - <location filename="../intro.cpp" line="+20"/> + <location filename="../intro.cpp" line="+22"/> <source>Bitcoin</source> <translation type="unfinished">Bitcoin</translation> </message> @@ -1104,7 +1165,7 @@ <translation type="unfinished"></translation> </message> <message> - <location line="+73"/> + <location line="+75"/> <source>Error: Specified data directory "%1" cannot be created.</source> <translation type="unfinished"></translation> </message> @@ -1155,7 +1216,7 @@ <message> <location line="+7"/> <location line="+26"/> - <location filename="../modaloverlay.cpp" line="+140"/> + <location filename="../modaloverlay.cpp" line="+141"/> <source>Unknown...</source> <translation type="unfinished"></translation> </message> @@ -1191,8 +1252,8 @@ <translation type="unfinished"></translation> </message> <message> - <location filename="../modaloverlay.cpp" line="-1"/> - <source>Unknown. Syncing Headers (%1)...</source> + <location filename="../modaloverlay.cpp" line="+6"/> + <source>Unknown. Syncing Headers (%1, %2%)...</source> <translation type="unfinished"></translation> </message> </context> @@ -1252,12 +1313,7 @@ <translation type="unfinished"></translation> </message> <message> - <location line="+16"/> - <source>MB</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+27"/> + <location line="+43"/> <source>Number of script &verification threads</source> <translation type="unfinished"></translation> </message> @@ -1301,12 +1357,7 @@ <translation type="unfinished"></translation> </message> <message> - <location line="+31"/> - <source>Active command-line options that override above options:</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+45"/> + <location line="+76"/> <source>Open the %1 configuration file from the working directory.</source> <translation type="unfinished"></translation> </message> @@ -1351,7 +1402,12 @@ <translation type="unfinished"></translation> </message> <message> - <location line="+68"/> + <location line="+28"/> + <source>MiB</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+40"/> <source>(0 = auto, <0 = leave that many cores free)</source> <translation type="unfinished"></translation> </message> @@ -1509,7 +1565,12 @@ <translation type="unfinished"></translation> </message> <message> - <location line="+182"/> + <location line="+41"/> + <source>Options set in this dialog are overridden by the command line or in the configuration file:</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+141"/> <source>&OK</source> <translation>&OK</translation> </message> @@ -1519,17 +1580,17 @@ <translation>&Cancel</translation> </message> <message> - <location filename="../optionsdialog.cpp" line="+92"/> + <location filename="../optionsdialog.cpp" line="+96"/> <source>default</source> <translation>default</translation> </message> <message> - <location line="+56"/> + <location line="+67"/> <source>none</source> <translation type="unfinished"></translation> </message> <message> - <location line="+77"/> + <location line="+89"/> <source>Confirm options reset</source> <translation>Confirm options reset</translation> </message> @@ -1672,8 +1733,8 @@ <context> <name>PaymentServer</name> <message> - <location filename="../paymentserver.cpp" line="+317"/> - <location line="+215"/> + <location filename="../paymentserver.cpp" line="+226"/> + <location line="+346"/> <location line="+42"/> <location line="+110"/> <location line="+14"/> @@ -1682,30 +1743,43 @@ <translation type="unfinished"></translation> </message> <message> - <location line="-398"/> + <location line="-529"/> <source>Cannot start bitcoin: click-to-pay handler</source> <translation type="unfinished"></translation> </message> <message> - <location line="+82"/> - <location line="+21"/> - <location line="+13"/> + <location line="+62"/> + <location line="+9"/> + <location line="+16"/> + <location line="+16"/> + <location line="+5"/> <location line="+7"/> <source>URI handling</source> <translation type="unfinished"></translation> </message> <message> - <location line="-41"/> + <location line="-53"/> <source>'bitcoin://' is not a valid URI. Use 'bitcoin:' instead.</source> <translation type="unfinished"></translation> </message> <message> - <location line="+22"/> + <location line="+10"/> + <source>You are using a BIP70 URL which will be unsupported in the future.</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+16"/> <source>Payment request fetch URL is invalid: %1</source> <translation type="unfinished"></translation> </message> <message> - <location line="+12"/> + <location line="+16"/> + <location line="+36"/> + <source>Cannot process payment request because BIP70 support was not compiled in.</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="-32"/> <source>Invalid payment address %1</source> <translation type="unfinished"></translation> </message> @@ -1715,17 +1789,18 @@ <translation type="unfinished"></translation> </message> <message> - <location line="+13"/> + <location line="+14"/> + <location line="+9"/> <source>Payment request file handling</source> <translation type="unfinished"></translation> </message> <message> - <location line="+1"/> + <location line="-8"/> <source>Payment request file cannot be read! This can be caused by an invalid payment request file.</source> <translation type="unfinished"></translation> </message> <message> - <location line="+61"/> + <location line="+199"/> <location line="+9"/> <location line="+31"/> <location line="+10"/> @@ -1796,7 +1871,7 @@ <translation type="unfinished"></translation> </message> <message> - <location line="+11"/> + <location line="+6"/> <source>Payment acknowledged</source> <translation type="unfinished"></translation> </message> @@ -1804,7 +1879,7 @@ <context> <name>PeerTableModel</name> <message> - <location filename="../peertablemodel.cpp" line="+109"/> + <location filename="../peertablemodel.cpp" line="+108"/> <source>User Agent</source> <translation type="unfinished"></translation> </message> @@ -1837,17 +1912,17 @@ <context> <name>QObject</name> <message> - <location filename="../bitcoinunits.cpp" line="+197"/> + <location filename="../bitcoinunits.cpp" line="+195"/> <source>Amount</source> <translation type="unfinished">Amount</translation> </message> <message> - <location filename="../guiutil.cpp" line="+115"/> + <location filename="../guiutil.cpp" line="+108"/> <source>Enter a Bitcoin address (e.g. %1)</source> <translation type="unfinished"></translation> </message> <message> - <location line="+686"/> + <location line="+702"/> <source>%1 d</source> <translation type="unfinished"></translation> </message> @@ -1957,25 +2032,12 @@ <translation type="unfinished"></translation> </message> <message> - <location filename="../bitcoin.cpp" line="+192"/> - <source>%1 didn't yet exit safely...</source> - <translation type="unfinished"></translation> - </message> - <message> - <location filename="../modaloverlay.cpp" line="-29"/> - <source>unknown</source> - <translation type="unfinished"></translation> - </message> -</context> -<context> - <name>QObject::QObject</name> - <message> - <location filename="../bitcoin.cpp" line="-117"/> + <location filename="../bitcoin.cpp" line="+74"/> <source>Error parsing command line arguments: %1.</source> <translation type="unfinished"></translation> </message> <message> - <location line="+38"/> + <location line="+37"/> <source>Error: Specified data directory "%1" does not exist.</source> <translation type="unfinished"></translation> </message> @@ -1989,11 +2051,21 @@ <source>Error: %1</source> <translation type="unfinished"></translation> </message> + <message> + <location line="+57"/> + <source>%1 didn't yet exit safely...</source> + <translation type="unfinished"></translation> + </message> + <message> + <location filename="../modaloverlay.cpp" line="-36"/> + <source>unknown</source> + <translation type="unfinished"></translation> + </message> </context> <context> <name>QRImageWidget</name> <message> - <location filename="../receiverequestdialog.cpp" line="+32"/> + <location filename="../qrimagewidget.cpp" line="+29"/> <source>&Save Image...</source> <translation type="unfinished"></translation> </message> @@ -2003,6 +2075,21 @@ <translation type="unfinished"></translation> </message> <message> + <location line="+13"/> + <source>Resulting URI too long, try to reduce the text for label / message.</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+7"/> + <source>Error encoding URI into QR Code.</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+38"/> + <source>QR code support not available.</source> + <translation type="unfinished"></translation> + </message> + <message> <location line="+32"/> <source>Save QR Code</source> <translation type="unfinished"></translation> @@ -2019,7 +2106,8 @@ <location filename="../forms/debugwindow.ui" line="+56"/> <location line="+26"/> <location line="+26"/> - <location line="+23"/> + <location line="+26"/> + <location line="+29"/> <location line="+26"/> <location line="+36"/> <location line="+23"/> @@ -2027,7 +2115,7 @@ <location line="+23"/> <location line="+36"/> <location line="+23"/> - <location line="+679"/> + <location line="+716"/> <location line="+23"/> <location line="+23"/> <location line="+23"/> @@ -2049,7 +2137,7 @@ <translation>N/A</translation> </message> <message> - <location line="-1361"/> + <location line="-1430"/> <source>Client version</source> <translation>Client version</translation> </message> @@ -2079,7 +2167,22 @@ <translation type="unfinished"></translation> </message> <message> - <location line="+26"/> + <location line="+10"/> + <source>To specify a non-default location of the data directory use the '%1' option.</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+19"/> + <source>Blocksdir</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+10"/> + <source>To specify a non-default location of the blocks directory use the '%1' option.</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+19"/> <source>Startup time</source> <translation>Startup time</translation> </message> @@ -2129,46 +2232,46 @@ <translation type="unfinished"></translation> </message> <message> - <location line="+8"/> + <location line="+11"/> <source>(none)</source> <translation type="unfinished"></translation> </message> <message> - <location line="+238"/> + <location line="+241"/> <source>&Reset</source> <translation type="unfinished"></translation> </message> <message> <location line="+80"/> - <location line="+558"/> + <location line="+589"/> <source>Received</source> <translation type="unfinished"></translation> </message> <message> - <location line="-478"/> - <location line="+455"/> + <location line="-509"/> + <location line="+486"/> <source>Sent</source> <translation type="unfinished"></translation> </message> <message> - <location line="-414"/> + <location line="-445"/> <source>&Peers</source> <translation type="unfinished"></translation> </message> <message> - <location line="+53"/> + <location line="+67"/> <source>Banned peers</source> <translation type="unfinished"></translation> </message> <message> - <location line="+60"/> - <location filename="../rpcconsole.cpp" line="+502"/> - <location line="+760"/> + <location line="+65"/> + <location filename="../rpcconsole.cpp" line="+498"/> + <location line="+757"/> <source>Select a peer to view detailed information.</source> <translation type="unfinished"></translation> </message> <message> - <location line="+25"/> + <location line="+37"/> <source>Whitelisted</source> <translation type="unfinished"></translation> </message> @@ -2198,18 +2301,18 @@ <translation type="unfinished"></translation> </message> <message> - <location line="-1095"/> - <location line="+1003"/> + <location line="-1164"/> + <location line="+1072"/> <source>User Agent</source> <translation type="unfinished"></translation> </message> <message> - <location line="-700"/> + <location line="-737"/> <source>Open the %1 debug log file from the current data directory. This can take a few seconds for large log files.</source> <translation type="unfinished"></translation> </message> <message> - <location line="+84"/> + <location line="+87"/> <source>Decrease font size</source> <translation type="unfinished"></translation> </message> @@ -2219,7 +2322,7 @@ <translation type="unfinished"></translation> </message> <message> - <location line="+610"/> + <location line="+644"/> <source>Services</source> <translation type="unfinished"></translation> </message> @@ -2269,7 +2372,7 @@ <translation type="unfinished"></translation> </message> <message> - <location line="-1132"/> + <location line="-1169"/> <source>Last block time</source> <translation>Last block time</translation> </message> @@ -2284,7 +2387,7 @@ <translation>&Console</translation> </message> <message> - <location line="+211"/> + <location line="+217"/> <source>&Network Traffic</source> <translation type="unfinished"></translation> </message> @@ -2294,7 +2397,7 @@ <translation type="unfinished"></translation> </message> <message> - <location filename="../rpcconsole.cpp" line="-414"/> + <location filename="../rpcconsole.cpp" line="-411"/> <source>In:</source> <translation type="unfinished"></translation> </message> @@ -2304,17 +2407,17 @@ <translation type="unfinished"></translation> </message> <message> - <location filename="../forms/debugwindow.ui" line="-315"/> + <location filename="../forms/debugwindow.ui" line="-321"/> <source>Debug log file</source> <translation>Debug log file</translation> </message> <message> - <location line="+152"/> + <location line="+155"/> <source>Clear console</source> <translation>Clear console</translation> </message> <message> - <location filename="../rpcconsole.cpp" line="-253"/> + <location filename="../rpcconsole.cpp" line="-252"/> <source>1 &hour</source> <translation type="unfinished"></translation> </message> @@ -2347,17 +2450,12 @@ <translation type="unfinished"></translation> </message> <message> - <location line="+48"/> + <location line="+47"/> <source>&Unban</source> <translation type="unfinished"></translation> </message> <message> - <location line="+54"/> - <source>default wallet</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+110"/> + <location line="+164"/> <source>Welcome to the %1 RPC console.</source> <translation type="unfinished"></translation> </message> @@ -2387,17 +2485,17 @@ <translation type="unfinished"></translation> </message> <message> - <location line="+68"/> + <location line="+70"/> <source>Executing command without any wallet</source> <translation type="unfinished"></translation> </message> <message> - <location line="+2"/> + <location line="-2"/> <source>Executing command using "%1" wallet</source> <translation type="unfinished"></translation> </message> <message> - <location line="+190"/> + <location line="+189"/> <source>(node id: %1)</source> <translation type="unfinished"></translation> </message> @@ -2474,43 +2572,43 @@ <translation type="unfinished"></translation> </message> <message> - <location line="-39"/> - <location line="+153"/> - <source>An optional amount to request. Leave this empty or zero to not request a specific amount.</source> + <location line="+136"/> + <source>Native segwit addresses (aka Bech32 or BIP-173) reduce your transaction fees later on and offer better protection against typos, but old wallets don't support them. When checked, an address compatible with older wallets will be created instead.</source> <translation type="unfinished"></translation> </message> <message> - <location line="-59"/> - <source>Clear all fields of the form.</source> + <location line="+3"/> + <source>Generate legacy address</source> <translation type="unfinished"></translation> </message> <message> - <location line="+3"/> - <source>Clear</source> + <location line="-178"/> + <location line="+153"/> + <source>An optional amount to request. Leave this empty or zero to not request a specific amount.</source> <translation type="unfinished"></translation> </message> <message> - <location line="+78"/> - <source>Native segwit addresses (aka Bech32 or BIP-173) reduce your transaction fees later on and offer better protection against typos, but old wallets don't support them. When unchecked, an address compatible with older wallets will be created instead.</source> + <location line="-76"/> + <source>&Create new receiving address</source> <translation type="unfinished"></translation> </message> <message> - <location line="+3"/> - <source>Generate native segwit (Bech32) address</source> + <location line="+17"/> + <source>Clear all fields of the form.</source> <translation type="unfinished"></translation> </message> <message> - <location line="+61"/> - <source>Requested payments history</source> + <location line="+3"/> + <source>Clear</source> <translation type="unfinished"></translation> </message> <message> - <location line="-162"/> - <source>&Request payment</source> + <location line="+142"/> + <source>Requested payments history</source> <translation type="unfinished"></translation> </message> <message> - <location line="+187"/> + <location line="+25"/> <source>Show the selected request (does the same as double clicking an entry)</source> <translation type="unfinished"></translation> </message> @@ -2530,7 +2628,7 @@ <translation type="unfinished"></translation> </message> <message> - <location filename="../receivecoinsdialog.cpp" line="+47"/> + <location filename="../receivecoinsdialog.cpp" line="+45"/> <source>Copy URI</source> <translation type="unfinished"></translation> </message> @@ -2573,7 +2671,7 @@ <translation type="unfinished"></translation> </message> <message> - <location filename="../receiverequestdialog.cpp" line="+65"/> + <location filename="../receiverequestdialog.cpp" line="+63"/> <source>Request payment to %1</source> <translation type="unfinished"></translation> </message> @@ -2612,21 +2710,11 @@ <source>Wallet</source> <translation type="unfinished">Wallet</translation> </message> - <message> - <location line="+11"/> - <source>Resulting URI too long, try to reduce the text for label / message.</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+5"/> - <source>Error encoding URI into QR Code.</source> - <translation type="unfinished"></translation> - </message> </context> <context> <name>RecentRequestsTableModel</name> <message> - <location filename="../recentrequeststablemodel.cpp" line="+27"/> + <location filename="../recentrequeststablemodel.cpp" line="+25"/> <source>Date</source> <translation type="unfinished">Date</translation> </message> @@ -2665,7 +2753,7 @@ <name>SendCoinsDialog</name> <message> <location filename="../forms/sendcoinsdialog.ui" line="+14"/> - <location filename="../sendcoinsdialog.cpp" line="+588"/> + <location filename="../sendcoinsdialog.cpp" line="+600"/> <source>Send Coins</source> <translation>Send Coins</translation> </message> @@ -2772,18 +2860,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+80"/> - <location line="+13"/> - <source>Paying only the minimum fee is just fine as long as there is less transaction volume than space in the blocks. But be aware that this can end up in a never confirming transaction once there is more demand for bitcoin transactions than the network can process.</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+3"/> - <source>(read the tooltip)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+29"/> + <location line="+112"/> <source>Recommended:</source> <translation type="unfinished"></translation> </message> @@ -2793,12 +2870,12 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+52"/> + <location line="+49"/> <source>(Smart fee not initialized yet. This usually takes a few blocks...)</source> <translation type="unfinished"></translation> </message> <message> - <location line="+185"/> + <location line="+166"/> <source>Send to multiple recipients at once</source> <translation>Send to multiple recipients at once</translation> </message> @@ -2813,17 +2890,27 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="-835"/> + <location line="-800"/> <source>Dust:</source> <translation type="unfinished"></translation> </message> <message> - <location line="+696"/> + <location line="+543"/> + <source>When there is less transaction volume than space in the blocks, miners as well as relaying nodes may enforce a minimum fee. Paying only this minimum fee is just fine, but be aware that this can result in a never confirming transaction once there is more demand for bitcoin transactions than the network can process.</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+3"/> + <source>A too low fee might result in a never confirming transaction (read the tooltip)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+131"/> <source>Confirmation time target:</source> <translation type="unfinished"></translation> </message> <message> - <location line="+74"/> + <location line="+58"/> <source>Enable Replace-By-Fee</source> <translation type="unfinished"></translation> </message> @@ -2853,7 +2940,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation>S&end</translation> </message> <message> - <location filename="../sendcoinsdialog.cpp" line="-504"/> + <location filename="../sendcoinsdialog.cpp" line="-512"/> <source>Copy quantity</source> <translation type="unfinished"></translation> </message> @@ -2888,20 +2975,29 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+76"/> + <location line="+74"/> <source>%1 (%2 blocks)</source> <translation type="unfinished"></translation> </message> <message> - <location line="+131"/> - <location line="+5"/> - <location line="+5"/> - <location line="+4"/> + <location line="+117"/> + <source> from wallet '%1'</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+14"/> + <location line="+11"/> + <source>%1 to '%2'</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="-6"/> + <location line="+10"/> <source>%1 to %2</source> <translation type="unfinished"></translation> </message> <message> - <location line="+6"/> + <location line="+7"/> <source>Are you sure you want to send?</source> <translation type="unfinished"></translation> </message> @@ -2916,12 +3012,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="-57"/> - <source>from wallet %1</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+36"/> + <location line="-21"/> <source>Please, review your transaction.</source> <translation type="unfinished"></translation> </message> @@ -2941,12 +3032,17 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+5"/> + <location line="+9"/> + <source>To review recipient list click "Show Details..."</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+6"/> <source>Confirm send coins</source> <translation type="unfinished"></translation> </message> <message> - <location line="+192"/> + <location line="+190"/> <source>The recipient address is not valid. Please recheck.</source> <translation type="unfinished"></translation> </message> @@ -2990,13 +3086,8 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <source>Payment request expired.</source> <translation type="unfinished"></translation> </message> - <message> - <location line="+91"/> - <source>Pay only the required fee of %1</source> - <translation type="unfinished"></translation> - </message> <message numerus="yes"> - <location line="+43"/> + <location line="+120"/> <source>Estimated to begin confirmation within %n block(s).</source> <translation> <numerusform>Estimated to begin confirmation within %n block.</numerusform> @@ -3138,7 +3229,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location filename="../sendcoinsentry.cpp" line="+35"/> + <location filename="../sendcoinsentry.cpp" line="+39"/> <source>Enter a label for this address to add it to your address book</source> <translation type="unfinished"></translation> </message> @@ -3146,7 +3237,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <context> <name>SendConfirmationDialog</name> <message> - <location filename="../sendcoinsdialog.cpp" line="+83"/> + <location filename="../sendcoinsdialog.cpp" line="+88"/> <location line="+5"/> <source>Yes</source> <translation type="unfinished"></translation> @@ -3366,7 +3457,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <context> <name>TransactionDesc</name> <message numerus="yes"> - <location filename="../transactiondesc.cpp" line="+31"/> + <location filename="../transactiondesc.cpp" line="+34"/> <source>Open for %n more block(s)</source> <translation> <numerusform>Open for %n more block</numerusform> @@ -3414,7 +3505,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+23"/> + <location line="+22"/> <source>Status</source> <translation type="unfinished"></translation> </message> @@ -3473,12 +3564,12 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <location line="+12"/> <location line="+54"/> <location line="+30"/> - <location line="+58"/> + <location line="+60"/> <source>Credit</source> <translation type="unfinished"></translation> </message> <message numerus="yes"> - <location line="-152"/> + <location line="-154"/> <source>matures in %n more block(s)</source> <translation> <numerusform>matures in %n more block</numerusform> @@ -3493,12 +3584,12 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <message> <location line="+60"/> <location line="+26"/> - <location line="+61"/> + <location line="+63"/> <source>Debit</source> <translation type="unfinished"></translation> </message> <message> - <location line="-77"/> + <location line="-79"/> <source>Total debit</source> <translation type="unfinished"></translation> </message> @@ -3549,12 +3640,12 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+18"/> + <location line="+19"/> <source>Merchant</source> <translation type="unfinished"></translation> </message> <message> - <location line="+7"/> + <location line="+8"/> <source>Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.</source> <translation type="unfinished"></translation> </message> @@ -3607,7 +3698,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <context> <name>TransactionTableModel</name> <message> - <location filename="../transactiontablemodel.cpp" line="+226"/> + <location filename="../transactiontablemodel.cpp" line="+223"/> <source>Date</source> <translation type="unfinished">Date</translation> </message> @@ -3814,7 +3905,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+47"/> + <location line="+51"/> <source>Abandon transaction</source> <translation type="unfinished"></translation> </message> @@ -3864,7 +3955,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+193"/> + <location line="+199"/> <source>Export Transaction History</source> <translation type="unfinished"></translation> </message> @@ -3929,7 +4020,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+166"/> + <location line="+171"/> <source>Range:</source> <translation type="unfinished"></translation> </message> @@ -3942,12 +4033,30 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <context> <name>UnitDisplayStatusBarControl</name> <message> - <location filename="../bitcoingui.cpp" line="+159"/> + <location filename="../bitcoingui.cpp" line="+155"/> <source>Unit to show amounts in. Click to select another unit.</source> <translation type="unfinished"></translation> </message> </context> <context> + <name>WalletController</name> + <message> + <location filename="../walletcontroller.cpp" line="+70"/> + <source>Close wallet</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+1"/> + <source>Are you sure you wish to close wallet <i>%1</i>?</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+1"/> + <source>Closing the wallet for too long can result in having to resync the entire chain if pruning is enabled.</source> + <translation type="unfinished"></translation> + </message> +</context> +<context> <name>WalletFrame</name> <message> <location filename="../walletframe.cpp" line="+29"/> @@ -3958,19 +4067,19 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <context> <name>WalletModel</name> <message> - <location filename="../walletmodel.cpp" line="+215"/> + <location filename="../walletmodel.cpp" line="+219"/> <source>Send Coins</source> <translation type="unfinished">Send Coins</translation> </message> <message> - <location line="+289"/> + <location line="+301"/> <location line="+39"/> - <location line="+6"/> + <location line="+5"/> <source>Fee bump error</source> <translation type="unfinished"></translation> </message> <message> - <location line="-45"/> + <location line="-44"/> <source>Increasing transaction fee failed</source> <translation type="unfinished"></translation> </message> @@ -4005,10 +4114,15 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+6"/> + <location line="+5"/> <source>Could not commit transaction</source> <translation type="unfinished"></translation> </message> + <message> + <location line="+30"/> + <source>default wallet</source> + <translation type="unfinished"></translation> + </message> </context> <context> <name>WalletView</name> @@ -4023,7 +4137,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished">Export the data in the current tab to a file</translation> </message> <message> - <location line="+207"/> + <location line="+206"/> <source>Backup Wallet</source> <translation type="unfinished"></translation> </message> @@ -4053,7 +4167,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+54"/> + <location line="+44"/> <source>Cancel</source> <translation type="unfinished"></translation> </message> @@ -4061,12 +4175,12 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <context> <name>bitcoin-core</name> <message> - <location filename="../bitcoinstrings.cpp" line="+29"/> + <location filename="../bitcoinstrings.cpp" line="+28"/> <source>Distributed under the MIT software license, see the accompanying file %s or %s</source> <translation type="unfinished"></translation> </message> <message> - <location line="+28"/> + <location line="+20"/> <source>Prune configured below the minimum of %d MiB. Please use a higher number.</source> <translation type="unfinished"></translation> </message> @@ -4081,32 +4195,32 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+81"/> + <location line="+70"/> <source>Error: A fatal internal error occurred, see debug.log for details</source> <translation type="unfinished"></translation> </message> <message> - <location line="+25"/> + <location line="+26"/> <source>Pruning blockstore...</source> <translation type="unfinished"></translation> </message> <message> - <location line="+28"/> + <location line="+31"/> <source>Unable to start HTTP server. See debug log for details.</source> <translation type="unfinished"></translation> </message> <message> - <location line="-184"/> - <source>Bitcoin Core</source> - <translation type="unfinished">Bitcoin Core</translation> + <location line="-168"/> + <source>The %s developers</source> + <translation type="unfinished"></translation> </message> <message> - <location line="+1"/> - <source>The %s developers</source> + <location line="+4"/> + <source>Can't generate a change-address key. No keys in the internal keypool and can't generate any keys.</source> <translation type="unfinished"></translation> </message> <message> - <location line="+7"/> + <location line="+3"/> <source>Cannot obtain a lock on data directory %s. %s is probably already running.</source> <translation type="unfinished"></translation> </message> @@ -4116,17 +4230,12 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+12"/> + <location line="+10"/> <source>Error reading %s! All keys read correctly, but transaction data or address book entries might be missing or incorrect.</source> <translation type="unfinished"></translation> </message> <message> - <location line="+8"/> - <source>Group outputs by address, selecting all or none, instead of selecting on a per-output basis. Privacy is improved as an address is only used once (unless someone sends to it after spending from it), but may result in slightly higher fees as suboptimal coin selection may result due to the added limitation (default: %u)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+9"/> + <location line="+11"/> <source>Please check that your computer's date and time are correct! If your clock is wrong, %s will not work properly.</source> <translation type="unfinished"></translation> </message> @@ -4161,12 +4270,12 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+11"/> + <location line="+5"/> <source>Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues.</source> <translation type="unfinished"></translation> </message> <message> - <location line="+10"/> + <location line="+7"/> <source>Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade.</source> <translation type="unfinished"></translation> </message> @@ -4197,6 +4306,11 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos </message> <message> <location line="+1"/> + <source>Config setting for %s only applied on %s network when in [%s] section.</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+1"/> <source>Copyright (C) %i-%i</source> <translation type="unfinished"></translation> </message> @@ -4212,11 +4326,6 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos </message> <message> <location line="+2"/> - <source>Error creating %s: You can't create non-HD wallets with this version.</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+1"/> <source>Error initializing block database</source> <translation>Error initializing block database</translation> </message> @@ -4246,7 +4355,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+2"/> + <location line="+1"/> <source>Error loading block database</source> <translation>Error loading block database</translation> </message> @@ -4256,12 +4365,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation>Error opening block database</translation> </message> <message> - <location line="+5"/> - <source>Error: Disk space is low!</source> - <translation>Error: Disk space is low!</translation> - </message> - <message> - <location line="+1"/> + <location line="+6"/> <source>Failed to listen on any port. Use -listen=0 if you want this.</source> <translation>Failed to listen on any port. Use -listen=0 if you want this.</translation> </message> @@ -4281,7 +4385,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation>Incorrect or no genesis block found. Wrong datadir for network?</translation> </message> <message> - <location line="+2"/> + <location line="+1"/> <source>Initialization sanity check failed. %s is shutting down.</source> <translation type="unfinished"></translation> </message> @@ -4301,7 +4405,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+21"/> + <location line="+23"/> <source>Specified blocks directory "%s" does not exist.</source> <translation type="unfinished"></translation> </message> @@ -4311,12 +4415,17 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="-43"/> + <location line="-45"/> <source>Loading P2P addresses...</source> <translation type="unfinished"></translation> </message> <message> - <location line="+1"/> + <location line="-15"/> + <source>Error: Disk space is too low!</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+16"/> <source>Loading banlist...</source> <translation type="unfinished"></translation> </message> @@ -4331,7 +4440,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+1"/> + <location line="+2"/> <source>Prune mode is incompatible with -txindex.</source> <translation type="unfinished"></translation> </message> @@ -4346,12 +4455,12 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+7"/> + <location line="+8"/> <source>The source code is available from %s.</source> <translation type="unfinished"></translation> </message> <message> - <location line="+8"/> + <location line="+9"/> <source>Transaction fee and change calculation failed</source> <translation type="unfinished"></translation> </message> @@ -4361,27 +4470,12 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+2"/> - <source>Unable to generate keys</source> - <translation type="unfinished"></translation> - </message> - <message> <location line="+3"/> - <source>Unsupported argument -benchmark ignored, use -debug=bench.</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+1"/> - <source>Unsupported argument -debugnet ignored, use -debug=net.</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+1"/> - <source>Unsupported argument -tor found, use -onion.</source> + <source>Unable to generate keys</source> <translation type="unfinished"></translation> </message> <message> - <location line="+1"/> + <location line="+4"/> <source>Unsupported logging category %s=%s.</source> <translation type="unfinished"></translation> </message> @@ -4401,17 +4495,17 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation>Verifying blocks...</translation> </message> <message> - <location line="+3"/> + <location line="+2"/> <source>Wallet needed to be rewritten: restart %s to complete</source> <translation type="unfinished"></translation> </message> <message> - <location line="-171"/> + <location line="-155"/> <source>Error: Listening for incoming connections failed (listen returned error %s)</source> <translation type="unfinished"></translation> </message> <message> - <location line="+11"/> + <location line="+5"/> <source>Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions)</source> <translation type="unfinished"></translation> </message> @@ -4421,17 +4515,12 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+44"/> + <location line="+35"/> <source>You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain</source> <translation type="unfinished"></translation> </message> <message> - <location line="+22"/> - <source>Error loading %s: You can't disable HD on an already existing HD wallet</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+4"/> + <location line="+25"/> <source>Error reading from database, shutting down.</source> <translation type="unfinished"></translation> </message> @@ -4441,12 +4530,12 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+8"/> - <source>Information</source> - <translation>Information</translation> + <location line="+2"/> + <source>Error: Disk space is low for %s</source> + <translation type="unfinished"></translation> </message> <message> - <location line="+3"/> + <location line="+8"/> <source>Invalid -onion address or hostname: '%s'</source> <translation type="unfinished"></translation> </message> @@ -4471,12 +4560,22 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+5"/> + <location line="+3"/> + <source>Prune mode is incompatible with -blockfilterindex.</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+3"/> <source>Reducing -maxconnections from %d to %d, because of system limitations.</source> <translation type="unfinished"></translation> </message> <message> <location line="+4"/> + <source>Section [%s] is not recognized.</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+1"/> <source>Signing transaction failed</source> <translation>Signing transaction failed</translation> </message> @@ -4497,6 +4596,12 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos </message> <message> <location line="+4"/> + <source>The specified config file %s does not exist +</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+1"/> <source>The transaction amount is too small to pay the fee</source> <translation type="unfinished"></translation> </message> @@ -4527,26 +4632,26 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos </message> <message> <location line="+2"/> - <source>Unable to generate initial keys</source> + <source>Unable to create the PID file '%s': %s</source> <translation type="unfinished"></translation> </message> <message> - <location line="+12"/> - <source>Verifying wallet(s)...</source> + <location line="+1"/> + <source>Unable to generate initial keys</source> <translation type="unfinished"></translation> </message> <message> - <location line="+1"/> - <source>Wallet %s resides outside wallet directory %s</source> + <location line="+3"/> + <source>Unknown -blockfilterindex value %s.</source> <translation type="unfinished"></translation> </message> <message> - <location line="+2"/> - <source>Warning</source> - <translation>Warning</translation> + <location line="+7"/> + <source>Verifying wallet(s)...</source> + <translation type="unfinished"></translation> </message> <message> - <location line="+1"/> + <location line="+2"/> <source>Warning: unknown new rules activated (versionbit %i)</source> <translation type="unfinished"></translation> </message> @@ -4556,17 +4661,12 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="-197"/> + <location line="-178"/> <source>-maxtxfee is set very high! Fees this large could be paid on a single transaction.</source> <translation type="unfinished"></translation> </message> <message> - <location line="+18"/> - <source>Error loading %s: You can't enable HD on an already existing non-HD wallet</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+46"/> + <location line="+56"/> <source>This is the transaction fee you may pay when fee estimates are not available.</source> <translation type="unfinished"></translation> </message> @@ -4581,22 +4681,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+9"/> - <source>Unsupported argument -socks found. Setting SOCKS version isn't possible anymore, only SOCKS5 proxies are supported.</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+3"/> - <source>Unsupported argument -whitelistalwaysrelay ignored, use -whitelistrelay and/or -whitelistforcerelay.</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+8"/> - <source>Warning: Unknown block versions being mined! It's possible unknown rules are in effect</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+3"/> + <location line="+14"/> <source>Warning: Wallet file corrupt, data salvaged! Original %s saved as %s in %s; if your balance or transactions are incorrect you should restore from a backup.</source> <translation type="unfinished"></translation> </message> @@ -4606,22 +4691,22 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+19"/> + <location line="+18"/> <source>Error loading wallet %s. Duplicate -wallet filename specified.</source> <translation type="unfinished"></translation> </message> <message> - <location line="+21"/> + <location line="+20"/> <source>Keypool ran out, please call keypoolrefill first</source> <translation type="unfinished"></translation> </message> <message> - <location line="+19"/> + <location line="+21"/> <source>Starting network threads...</source> <translation type="unfinished"></translation> </message> <message> - <location line="+3"/> + <location line="+4"/> <source>The wallet will avoid paying less than the minimum relay fee.</source> <translation type="unfinished"></translation> </message> @@ -4651,42 +4736,37 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation type="unfinished"></translation> </message> <message> - <location line="+8"/> + <location line="+10"/> <source>Unknown network specified in -onlynet: '%s'</source> <translation>Unknown network specified in -onlynet: '%s'</translation> </message> <message> - <location line="-46"/> + <location line="-51"/> <source>Insufficient funds</source> <translation>Insufficient funds</translation> </message> <message> - <location line="-134"/> - <source>Can't generate a change-address key. Private keys are disabled for this wallet.</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+8"/> + <location line="-107"/> <source>Cannot upgrade a non HD split wallet without upgrading to support pre split keypool. Please use -upgradewallet=169900 or -upgradewallet with no version specified.</source> <translation type="unfinished"></translation> </message> <message> - <location line="+14"/> + <location line="+12"/> <source>Fee estimation failed. Fallbackfee is disabled. Wait a few blocks or enable -fallbackfee.</source> <translation type="unfinished"></translation> </message> <message> - <location line="+60"/> + <location line="+48"/> <source>Warning: Private keys detected in wallet {%s} with disabled private keys</source> <translation type="unfinished"></translation> </message> <message> - <location line="+24"/> + <location line="+21"/> <source>Cannot write to data directory '%s'; check permissions.</source> <translation type="unfinished"></translation> </message> <message> - <location line="+39"/> + <location line="+37"/> <source>Loading block index...</source> <translation>Loading block index...</translation> </message> @@ -4696,24 +4776,19 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos <translation>Loading wallet...</translation> </message> <message> - <location line="-42"/> + <location line="-40"/> <source>Cannot downgrade wallet</source> <translation>Cannot downgrade wallet</translation> </message> <message> - <location line="+50"/> + <location line="+49"/> <source>Rescanning...</source> <translation>Rescanning...</translation> </message> <message> - <location line="-43"/> + <location line="-41"/> <source>Done loading</source> <translation>Done loading</translation> </message> - <message> - <location line="+14"/> - <source>Error</source> - <translation>Error</translation> - </message> </context> </TS> |