diff options
Diffstat (limited to 'src/init.cpp')
| -rw-r--r-- | src/init.cpp | 208 |
1 files changed, 103 insertions, 105 deletions
diff --git a/src/init.cpp b/src/init.cpp index 94702301a6..4bb2bc2c3e 100644 --- a/src/init.cpp +++ b/src/init.cpp @@ -43,10 +43,8 @@ #include <util.h> #include <utilmoneystr.h> #include <validationinterface.h> -#ifdef ENABLE_WALLET -#include <wallet/init.h> -#endif #include <warnings.h> +#include <walletinitinterface.h> #include <stdint.h> #include <stdio.h> #include <memory> @@ -74,6 +72,7 @@ static const bool DEFAULT_STOPAFTERBLOCKIMPORT = false; std::unique_ptr<CConnman> g_connman; std::unique_ptr<PeerLogicValidation> peerLogic; +std::unique_ptr<WalletInitInterface> g_wallet_init_interface; #if ENABLE_ZMQ static CZMQNotificationInterface* pzmqNotificationInterface = nullptr; @@ -116,7 +115,6 @@ static const char* FEE_ESTIMATES_FILENAME="fee_estimates.dat"; // std::atomic<bool> fRequestShutdown(false); -std::atomic<bool> fDumpMempoolLater(false); void StartShutdown() { @@ -155,16 +153,19 @@ public: static std::unique_ptr<CCoinsViewErrorCatcher> pcoinscatcher; static std::unique_ptr<ECCVerifyHandle> globalVerifyHandle; -void Interrupt(boost::thread_group& threadGroup) +static boost::thread_group threadGroup; +static CScheduler scheduler; + +void Interrupt() { InterruptHTTPServer(); InterruptHTTPRPC(); InterruptRPC(); InterruptREST(); InterruptTorControl(); + InterruptMapPort(); if (g_connman) g_connman->Interrupt(); - threadGroup.interrupt_all(); } void Shutdown() @@ -186,10 +187,8 @@ void Shutdown() StopREST(); StopRPC(); StopHTTPServer(); -#ifdef ENABLE_WALLET - FlushWallets(); -#endif - MapPort(false); + g_wallet_init_interface->Flush(); + StopMapPort(); // Because these depend on each-other, we make sure that neither can be // using the other before destroying them. @@ -199,13 +198,19 @@ void Shutdown() g_connman.reset(); StopTorControl(); - if (fDumpMempoolLater && gArgs.GetArg("-persistmempool", DEFAULT_PERSIST_MEMPOOL)) { + + // After everything has been shut down, but before things get flushed, stop the + // CScheduler/checkqueue threadGroup + threadGroup.interrupt_all(); + threadGroup.join_all(); + + if (g_is_mempool_loaded && gArgs.GetArg("-persistmempool", DEFAULT_PERSIST_MEMPOOL)) { DumpMempool(); } if (fFeeEstimatesInitialized) { - ::feeEstimator.FlushUnconfirmed(::mempool); + ::feeEstimator.FlushUnconfirmed(); fs::path est_path = GetDataDir() / FEE_ESTIMATES_FILENAME; CAutoFile est_fileout(fsbridge::fopen(est_path, "wb"), SER_DISK, CLIENT_VERSION); if (!est_fileout.IsNull()) @@ -240,9 +245,7 @@ void Shutdown() pcoinsdbview.reset(); pblocktree.reset(); } -#ifdef ENABLE_WALLET - StopWallets(); -#endif + g_wallet_init_interface->Stop(); #if ENABLE_ZMQ if (pzmqNotificationInterface) { @@ -262,9 +265,8 @@ void Shutdown() UnregisterAllValidationInterfaces(); GetMainSignals().UnregisterBackgroundSignalScheduler(); GetMainSignals().UnregisterWithMempoolSignals(mempool); -#ifdef ENABLE_WALLET - CloseWallets(); -#endif + g_wallet_init_interface->Close(); + g_wallet_init_interface.reset(); globalVerifyHandle.reset(); ECC_Stop(); LogPrintf("%s: done\n", __func__); @@ -323,12 +325,14 @@ std::string HelpMessage(HelpMessageMode mode) strUsage += HelpMessageOpt("-?", _("Print this help message and exit")); strUsage += HelpMessageOpt("-version", _("Print version and exit")); strUsage += HelpMessageOpt("-alertnotify=<cmd>", _("Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)")); + strUsage +=HelpMessageOpt("-assumevalid=<hex>", strprintf(_("If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: %s, testnet: %s)"), defaultChainParams->GetConsensus().defaultAssumeValid.GetHex(), testnetChainParams->GetConsensus().defaultAssumeValid.GetHex())); + strUsage += HelpMessageOpt("-blocksdir=<dir>", _("Specify blocks directory (default: <datadir>/blocks)")); strUsage += HelpMessageOpt("-blocknotify=<cmd>", _("Execute command when the best block changes (%s in cmd is replaced by block hash)")); + strUsage += HelpMessageOpt("-blockreconstructionextratxn=<n>", strprintf(_("Extra transactions to keep in memory for compact block reconstructions (default: %u)"), DEFAULT_BLOCK_RECONSTRUCTION_EXTRA_TXN)); if (showDebug) strUsage += HelpMessageOpt("-blocksonly", strprintf(_("Whether to operate in a blocks only mode (default: %u)"), DEFAULT_BLOCKSONLY)); - strUsage +=HelpMessageOpt("-assumevalid=<hex>", strprintf(_("If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: %s, testnet: %s)"), defaultChainParams->GetConsensus().defaultAssumeValid.GetHex(), testnetChainParams->GetConsensus().defaultAssumeValid.GetHex())); - strUsage += HelpMessageOpt("-conf=<file>", strprintf(_("Specify configuration file (default: %s)"), BITCOIN_CONF_FILENAME)); - if (mode == HMM_BITCOIND) + strUsage += HelpMessageOpt("-conf=<file>", strprintf(_("Specify configuration file. Relative paths will be prefixed by datadir location. (default: %s)"), BITCOIN_CONF_FILENAME)); + if (mode == HelpMessageMode::BITCOIND) { #if HAVE_DECL_DAEMON strUsage += HelpMessageOpt("-daemon", _("Run in the background as a daemon and accept commands")); @@ -339,28 +343,27 @@ std::string HelpMessage(HelpMessageMode mode) strUsage += HelpMessageOpt("-dbbatchsize", strprintf("Maximum database write batch size in bytes (default: %u)", nDefaultDbBatchSize)); } strUsage += HelpMessageOpt("-dbcache=<n>", strprintf(_("Set database cache size in megabytes (%d to %d, default: %d)"), nMinDbCache, nMaxDbCache, nDefaultDbCache)); + strUsage += HelpMessageOpt("-debuglogfile=<file>", strprintf(_("Specify location of debug log file. Relative paths will be prefixed by a net-specific datadir location. (default: %s)"), DEFAULT_DEBUGLOGFILE)); if (showDebug) strUsage += HelpMessageOpt("-feefilter", strprintf("Tell other nodes to filter invs to us by our mempool min fee (default: %u)", DEFAULT_FEEFILTER)); strUsage += HelpMessageOpt("-loadblock=<file>", _("Imports blocks from external blk000??.dat file on startup")); - strUsage += HelpMessageOpt("-debuglogfile=<file>", strprintf(_("Specify location of debug log file: this can be an absolute path or a path relative to the data directory (default: %s)"), DEFAULT_DEBUGLOGFILE)); - strUsage += HelpMessageOpt("-maxorphantx=<n>", strprintf(_("Keep at most <n> unconnectable transactions in memory (default: %u)"), DEFAULT_MAX_ORPHAN_TRANSACTIONS)); strUsage += HelpMessageOpt("-maxmempool=<n>", strprintf(_("Keep the transaction memory pool below <n> megabytes (default: %u)"), DEFAULT_MAX_MEMPOOL_SIZE)); + strUsage += HelpMessageOpt("-maxorphantx=<n>", strprintf(_("Keep at most <n> unconnectable transactions in memory (default: %u)"), DEFAULT_MAX_ORPHAN_TRANSACTIONS)); strUsage += HelpMessageOpt("-mempoolexpiry=<n>", strprintf(_("Do not keep transactions in the mempool longer than <n> hours (default: %u)"), DEFAULT_MEMPOOL_EXPIRY)); if (showDebug) { strUsage += HelpMessageOpt("-minimumchainwork=<hex>", strprintf("Minimum work assumed to exist on a valid chain in hex (default: %s, testnet: %s)", defaultChainParams->GetConsensus().nMinimumChainWork.GetHex(), testnetChainParams->GetConsensus().nMinimumChainWork.GetHex())); } - strUsage += HelpMessageOpt("-persistmempool", strprintf(_("Whether to save the mempool on shutdown and load on restart (default: %u)"), DEFAULT_PERSIST_MEMPOOL)); - strUsage += HelpMessageOpt("-blockreconstructionextratxn=<n>", strprintf(_("Extra transactions to keep in memory for compact block reconstructions (default: %u)"), DEFAULT_BLOCK_RECONSTRUCTION_EXTRA_TXN)); strUsage += HelpMessageOpt("-par=<n>", strprintf(_("Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d)"), -GetNumCores(), MAX_SCRIPTCHECK_THREADS, DEFAULT_SCRIPTCHECK_THREADS)); + strUsage += HelpMessageOpt("-persistmempool", strprintf(_("Whether to save the mempool on shutdown and load on restart (default: %u)"), DEFAULT_PERSIST_MEMPOOL)); #ifndef WIN32 - strUsage += HelpMessageOpt("-pid=<file>", strprintf(_("Specify pid file (default: %s)"), BITCOIN_PID_FILENAME)); + strUsage += HelpMessageOpt("-pid=<file>", strprintf(_("Specify pid file. Relative paths will be prefixed by a net-specific datadir location. (default: %s)"), BITCOIN_PID_FILENAME)); #endif strUsage += HelpMessageOpt("-prune=<n>", strprintf(_("Reduce storage requirements by enabling pruning (deleting) of old blocks. This allows the pruneblockchain RPC to be called to delete specific blocks, and enables automatic pruning of old blocks if a target size in MiB is provided. This mode is incompatible with -txindex and -rescan. " "Warning: Reverting this setting requires re-downloading the entire blockchain. " "(default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >%u = automatically prune block files to stay under the specified target size in MiB)"), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024)); - strUsage += HelpMessageOpt("-reindex-chainstate", _("Rebuild chain state from the currently indexed blocks")); strUsage += HelpMessageOpt("-reindex", _("Rebuild chain state and block index from the blk*.dat files on disk")); + strUsage += HelpMessageOpt("-reindex-chainstate", _("Rebuild chain state from the currently indexed blocks")); #ifndef WIN32 strUsage += HelpMessageOpt("-sysperms", _("Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality)")); #endif @@ -383,10 +386,11 @@ std::string HelpMessage(HelpMessageMode mode) strUsage += HelpMessageOpt("-maxreceivebuffer=<n>", strprintf(_("Maximum per-connection receive buffer, <n>*1000 bytes (default: %u)"), DEFAULT_MAXRECEIVEBUFFER)); strUsage += HelpMessageOpt("-maxsendbuffer=<n>", strprintf(_("Maximum per-connection send buffer, <n>*1000 bytes (default: %u)"), DEFAULT_MAXSENDBUFFER)); strUsage += HelpMessageOpt("-maxtimeadjustment", strprintf(_("Maximum allowed median peer time offset adjustment. Local perspective of time may be influenced by peers forward or backward by this amount. (default: %u seconds)"), DEFAULT_MAX_TIME_ADJUSTMENT)); + strUsage += HelpMessageOpt("-maxuploadtarget=<n>", strprintf(_("Tries to keep outbound traffic under the given target (in MiB per 24h), 0 = no limit (default: %d)"), DEFAULT_MAX_UPLOAD_TARGET)); strUsage += HelpMessageOpt("-onion=<ip:port>", strprintf(_("Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s)"), "-proxy")); strUsage += HelpMessageOpt("-onlynet=<net>", _("Only connect to nodes in network <net> (ipv4, ipv6 or onion)")); - strUsage += HelpMessageOpt("-permitbaremultisig", strprintf(_("Relay non-P2SH multisig (default: %u)"), DEFAULT_PERMIT_BAREMULTISIG)); strUsage += HelpMessageOpt("-peerbloomfilters", strprintf(_("Support filtering of blocks and transaction with bloom filters (default: %u)"), DEFAULT_PEERBLOOMFILTERS)); + strUsage += HelpMessageOpt("-permitbaremultisig", strprintf(_("Relay non-P2SH multisig (default: %u)"), DEFAULT_PERMIT_BAREMULTISIG)); strUsage += HelpMessageOpt("-port=<port>", strprintf(_("Listen for connections on <port> (default: %u or testnet: %u)"), defaultChainParams->GetDefaultPort(), testnetChainParams->GetDefaultPort())); strUsage += HelpMessageOpt("-proxy=<ip:port>", _("Connect through SOCKS5 proxy")); strUsage += HelpMessageOpt("-proxyrandomize", strprintf(_("Randomize credentials for every proxy connection. This enables Tor stream isolation (default: %u)"), DEFAULT_PROXYRANDOMIZE)); @@ -404,11 +408,8 @@ std::string HelpMessage(HelpMessageMode mode) strUsage += HelpMessageOpt("-whitebind=<addr>", _("Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6")); strUsage += HelpMessageOpt("-whitelist=<IP address or network>", _("Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple times.") + " " + _("Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway")); - strUsage += HelpMessageOpt("-maxuploadtarget=<n>", strprintf(_("Tries to keep outbound traffic under the given target (in MiB per 24h), 0 = no limit (default: %d)"), DEFAULT_MAX_UPLOAD_TARGET)); -#ifdef ENABLE_WALLET - strUsage += GetWalletHelpString(showDebug); -#endif + strUsage += g_wallet_init_interface->GetHelpString(showDebug); #if ENABLE_ZMQ strUsage += HelpMessageGroup(_("ZeroMQ notification options:")); @@ -419,19 +420,16 @@ std::string HelpMessage(HelpMessageMode mode) #endif strUsage += HelpMessageGroup(_("Debugging/Testing options:")); - strUsage += HelpMessageOpt("-uacomment=<cmt>", _("Append comment to the user agent string")); - if (showDebug) - { + if (showDebug) { strUsage += HelpMessageOpt("-checkblocks=<n>", strprintf(_("How many blocks to check at startup (default: %u, 0 = all)"), DEFAULT_CHECKBLOCKS)); strUsage += HelpMessageOpt("-checklevel=<n>", strprintf(_("How thorough the block verification of -checkblocks is (0-4, default: %u)"), DEFAULT_CHECKLEVEL)); - strUsage += HelpMessageOpt("-checkblockindex", strprintf("Do a full consistency check for mapBlockIndex, setBlockIndexCandidates, chainActive and mapBlocksUnlinked occasionally. Also sets -checkmempool (default: %u)", defaultChainParams->DefaultConsistencyChecks())); + strUsage += HelpMessageOpt("-checkblockindex", strprintf("Do a full consistency check for mapBlockIndex, setBlockIndexCandidates, chainActive and mapBlocksUnlinked occasionally. (default: %u)", defaultChainParams->DefaultConsistencyChecks())); strUsage += HelpMessageOpt("-checkmempool=<n>", strprintf("Run checks every <n> transactions (default: %u)", defaultChainParams->DefaultConsistencyChecks())); strUsage += HelpMessageOpt("-checkpoints", strprintf("Disable expensive verification for known chain history (default: %u)", DEFAULT_CHECKPOINTS_ENABLED)); strUsage += HelpMessageOpt("-disablesafemode", strprintf("Disable safemode, override a real safe mode event (default: %u)", DEFAULT_DISABLE_SAFEMODE)); strUsage += HelpMessageOpt("-deprecatedrpc=<method>", "Allows deprecated RPC method(s) to be used"); strUsage += HelpMessageOpt("-testsafemode", strprintf("Force safe mode (default: %u)", DEFAULT_TESTSAFEMODE)); strUsage += HelpMessageOpt("-dropmessagestest=<n>", "Randomly drop 1 of every <n> network messages"); - strUsage += HelpMessageOpt("-fuzzmessagestest=<n>", "Randomly fuzz 1 of every <n> network messages"); strUsage += HelpMessageOpt("-stopafterblockimport", strprintf("Stop running after importing blocks from disk (default: %u)", DEFAULT_STOPAFTERBLOCKIMPORT)); strUsage += HelpMessageOpt("-stopatheight", strprintf("Stop running after reaching the given height in the main chain (default: %u)", DEFAULT_STOPATHEIGHT)); @@ -440,6 +438,7 @@ std::string HelpMessage(HelpMessageMode mode) strUsage += HelpMessageOpt("-limitdescendantcount=<n>", strprintf("Do not accept transactions if any ancestor would have <n> or more in-mempool descendants (default: %u)", DEFAULT_DESCENDANT_LIMIT)); strUsage += HelpMessageOpt("-limitdescendantsize=<n>", strprintf("Do not accept transactions if any ancestor would have more than <n> kilobytes of in-mempool descendants (default: %u).", DEFAULT_DESCENDANT_SIZE_LIMIT)); strUsage += HelpMessageOpt("-vbparams=deployment:start:end", "Use given start/end times for specified version bits deployment (regtest-only)"); + strUsage += HelpMessageOpt("-addrmantest", "Allows to test address relay on localhost"); } strUsage += HelpMessageOpt("-debug=<category>", strprintf(_("Output debugging information (default: %u, supplying <category> is optional)"), 0) + ". " + _("If <category> is not supplied or if <category> = 1, output all debugging information.") + " " + _("<category> can be:") + " " + ListLogCategories() + "."); @@ -456,12 +455,13 @@ std::string HelpMessage(HelpMessageMode mode) } strUsage += HelpMessageOpt("-maxtxfee=<amt>", strprintf(_("Maximum total fees (in %s) to use in a single wallet transaction or raw transaction; setting this too low may abort large transactions (default: %s)"), CURRENCY_UNIT, FormatMoney(DEFAULT_TRANSACTION_MAXFEE))); - strUsage += HelpMessageOpt("-printtoconsole", _("Send trace/debug info to console instead of debug.log file")); if (showDebug) { strUsage += HelpMessageOpt("-printpriority", strprintf("Log transaction fee per kB when mining blocks (default: %u)", DEFAULT_PRINTPRIORITY)); } + strUsage += HelpMessageOpt("-printtoconsole", _("Send trace/debug info to console instead of debug.log file")); strUsage += HelpMessageOpt("-shrinkdebugfile", _("Shrink debug.log file on client startup (default: 1 when no -debug)")); + strUsage += HelpMessageOpt("-uacomment=<cmt>", _("Append comment to the user agent string")); AppendParamsHelpMessages(strUsage, showDebug); @@ -477,32 +477,31 @@ std::string HelpMessage(HelpMessageMode mode) strUsage += HelpMessageOpt("-mempoolreplacement", strprintf(_("Enable transaction replacement in the memory pool (default: %u)"), DEFAULT_ENABLE_REPLACEMENT)); strUsage += HelpMessageOpt("-minrelaytxfee=<amt>", strprintf(_("Fees (in %s/kB) smaller than this are considered zero fee for relaying, mining and transaction creation (default: %s)"), CURRENCY_UNIT, FormatMoney(DEFAULT_MIN_RELAY_TX_FEE))); - strUsage += HelpMessageOpt("-whitelistrelay", strprintf(_("Accept relayed transactions received from whitelisted peers even when not relaying transactions (default: %d)"), DEFAULT_WHITELISTRELAY)); strUsage += HelpMessageOpt("-whitelistforcerelay", strprintf(_("Force relay of transactions from whitelisted peers even if they violate local relay policy (default: %d)"), DEFAULT_WHITELISTFORCERELAY)); + strUsage += HelpMessageOpt("-whitelistrelay", strprintf(_("Accept relayed transactions received from whitelisted peers even when not relaying transactions (default: %d)"), DEFAULT_WHITELISTRELAY)); strUsage += HelpMessageGroup(_("Block creation options:")); strUsage += HelpMessageOpt("-blockmaxweight=<n>", strprintf(_("Set maximum BIP141 block weight (default: %d)"), DEFAULT_BLOCK_MAX_WEIGHT)); - strUsage += HelpMessageOpt("-blockmaxsize=<n>", _("Set maximum BIP141 block weight to this * 4. Deprecated, use blockmaxweight")); strUsage += HelpMessageOpt("-blockmintxfee=<amt>", strprintf(_("Set lowest fee rate (in %s/kB) for transactions to be included in block creation. (default: %s)"), CURRENCY_UNIT, FormatMoney(DEFAULT_BLOCK_MIN_TX_FEE))); if (showDebug) strUsage += HelpMessageOpt("-blockversion=<n>", "Override block version to test forking scenarios"); strUsage += HelpMessageGroup(_("RPC server options:")); - strUsage += HelpMessageOpt("-server", _("Accept command line and JSON-RPC commands")); strUsage += HelpMessageOpt("-rest", strprintf(_("Accept public REST requests (default: %u)"), DEFAULT_REST_ENABLE)); + strUsage += HelpMessageOpt("-rpcallowip=<ip>", _("Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times")); + strUsage += HelpMessageOpt("-rpcauth=<userpw>", _("Username and hashed password for JSON-RPC connections. The field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A canonical python script is included in share/rpcuser. The client then connects normally using the rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This option can be specified multiple times")); strUsage += HelpMessageOpt("-rpcbind=<addr>[:port]", _("Bind to given address to listen for JSON-RPC connections. This option is ignored unless -rpcallowip is also passed. Port is optional and overrides -rpcport. Use [host]:port notation for IPv6. This option can be specified multiple times (default: 127.0.0.1 and ::1 i.e., localhost, or if -rpcallowip has been specified, 0.0.0.0 and :: i.e., all addresses)")); - strUsage += HelpMessageOpt("-rpccookiefile=<loc>", _("Location of the auth cookie (default: data dir)")); - strUsage += HelpMessageOpt("-rpcuser=<user>", _("Username for JSON-RPC connections")); + strUsage += HelpMessageOpt("-rpccookiefile=<loc>", _("Location of the auth cookie. Relative paths will be prefixed by a net-specific datadir location. (default: data dir)")); strUsage += HelpMessageOpt("-rpcpassword=<pw>", _("Password for JSON-RPC connections")); - strUsage += HelpMessageOpt("-rpcauth=<userpw>", _("Username and hashed password for JSON-RPC connections. The field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A canonical python script is included in share/rpcuser. The client then connects normally using the rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This option can be specified multiple times")); strUsage += HelpMessageOpt("-rpcport=<port>", strprintf(_("Listen for JSON-RPC connections on <port> (default: %u or testnet: %u)"), defaultBaseParams->RPCPort(), testnetBaseParams->RPCPort())); - strUsage += HelpMessageOpt("-rpcallowip=<ip>", _("Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times")); strUsage += HelpMessageOpt("-rpcserialversion", strprintf(_("Sets the serialization of raw transaction or block hex returned in non-verbose mode, non-segwit(0) or segwit(1) (default: %d)"), DEFAULT_RPC_SERIALIZE_VERSION)); + if (showDebug) + strUsage += HelpMessageOpt("-rpcservertimeout=<n>", strprintf("Timeout during HTTP requests (default: %d)", DEFAULT_HTTP_SERVER_TIMEOUT)); strUsage += HelpMessageOpt("-rpcthreads=<n>", strprintf(_("Set the number of threads to service RPC calls (default: %d)"), DEFAULT_HTTP_THREADS)); - if (showDebug) { + strUsage += HelpMessageOpt("-rpcuser=<user>", _("Username for JSON-RPC connections")); + if (showDebug) strUsage += HelpMessageOpt("-rpcworkqueue=<n>", strprintf("Set the depth of the work queue to service RPC calls (default: %d)", DEFAULT_HTTP_WORKQUEUE)); - strUsage += HelpMessageOpt("-rpcservertimeout=<n>", strprintf("Timeout during HTTP requests (default: %d)", DEFAULT_HTTP_SERVER_TIMEOUT)); - } + strUsage += HelpMessageOpt("-server", _("Accept command line and JSON-RPC commands")); return strUsage; } @@ -537,7 +536,8 @@ static void BlockNotifyCallback(bool initialSync, const CBlockIndex *pBlockIndex std::string strCmd = gArgs.GetArg("-blocknotify", ""); if (!strCmd.empty()) { boost::replace_all(strCmd, "%s", pBlockIndex->GetBlockHash().GetHex()); - boost::thread t(runCommand, strCmd); // thread runs free + std::thread t(runCommand, strCmd); + t.detach(); // thread runs free } } @@ -584,7 +584,7 @@ void CleanupBlockRevFiles() // Remove the rev files immediately and insert the blk file paths into an // ordered map keyed by block file index. LogPrintf("Removing unusable blk?????.dat and rev?????.dat files for -reindex with -prune\n"); - fs::path blocksdir = GetDataDir() / "blocks"; + fs::path blocksdir = GetBlocksDir(); for (fs::directory_iterator it(blocksdir); it != fs::directory_iterator(); it++) { if (fs::is_regular_file(*it) && it->path().filename().string().length() == 12 && @@ -668,19 +668,21 @@ void ThreadImport(std::vector<fs::path> vImportFiles) // scan for better chains in the block chain database, that are not yet connected in the active best chain CValidationState state; if (!ActivateBestChain(state, chainparams)) { - LogPrintf("Failed to connect best block"); + LogPrintf("Failed to connect best block\n"); StartShutdown(); + return; } if (gArgs.GetBoolArg("-stopafterblockimport", DEFAULT_STOPAFTERBLOCKIMPORT)) { LogPrintf("Stopping after block import\n"); StartShutdown(); + return; } } // End scope of CImportingNow if (gArgs.GetArg("-persistmempool", DEFAULT_PERSIST_MEMPOOL)) { LoadMempool(); - fDumpMempoolLater = !fRequestShutdown; } + g_is_mempool_loaded = !fRequestShutdown; } /** Sanity checks @@ -705,7 +707,7 @@ bool InitSanityCheck(void) return true; } -bool AppInitServers(boost::thread_group& threadGroup) +bool AppInitServers() { RPCServer::OnStarted(&OnRPCStarted); RPCServer::OnStopped(&OnRPCStopped); @@ -784,15 +786,6 @@ void InitParameterInteraction() if (gArgs.SoftSetBoolArg("-whitelistrelay", true)) LogPrintf("%s: parameter interaction: -whitelistforcerelay=1 -> setting -whitelistrelay=1\n", __func__); } - - if (gArgs.IsArgSet("-blockmaxsize")) { - unsigned int max_size = gArgs.GetArg("-blockmaxsize", 0); - if (gArgs.SoftSetArg("blockmaxweight", strprintf("%d", max_size * WITNESS_SCALE_FACTOR))) { - LogPrintf("%s: parameter interaction: -blockmaxsize=%d -> setting -blockmaxweight=%d (-blockmaxsize is deprecated!)\n", __func__, max_size, max_size * WITNESS_SCALE_FACTOR); - } else { - LogPrintf("%s: Ignoring blockmaxsize setting which is overridden by blockmaxweight", __func__); - } - } } static std::string ResolveErrMsg(const char * const optname, const std::string& strBind) @@ -894,6 +887,10 @@ bool AppInitParameterInteraction() // also see: InitParameterInteraction() + if (!fs::is_directory(GetBlocksDir(false))) { + return InitError(strprintf(_("Specified blocks directory \"%s\" does not exist.\n"), gArgs.GetArg("-blocksdir", "").c_str())); + } + // if using block pruning, then disallow txindex if (gArgs.GetArg("-prune", 0)) { if (gArgs.GetBoolArg("-txindex", DEFAULT_TXINDEX)) @@ -912,7 +909,7 @@ bool AppInitParameterInteraction() nMaxConnections = std::max(nUserMaxConnections, 0); // Trim requested connection counts, to fit into system limitations - nMaxConnections = std::max(std::min(nMaxConnections, (int)(FD_SETSIZE - nBind - MIN_CORE_FILEDESCRIPTORS - MAX_ADDNODE_CONNECTIONS)), 0); + nMaxConnections = std::max(std::min(nMaxConnections, FD_SETSIZE - nBind - MIN_CORE_FILEDESCRIPTORS - MAX_ADDNODE_CONNECTIONS), 0); nFD = RaiseFileDescriptorLimit(nMaxConnections + MIN_CORE_FILEDESCRIPTORS + MAX_ADDNODE_CONNECTIONS); if (nFD < MIN_CORE_FILEDESCRIPTORS) return InitError(_("Not enough file descriptors available.")); @@ -1069,7 +1066,7 @@ bool AppInitParameterInteraction() if (gArgs.IsArgSet("-dustrelayfee")) { CAmount n = 0; - if (!ParseMoney(gArgs.GetArg("-dustrelayfee", ""), n) || 0 == n) + if (!ParseMoney(gArgs.GetArg("-dustrelayfee", ""), n)) return InitError(AmountErrMsg("dustrelayfee", gArgs.GetArg("-dustrelayfee", ""))); dustRelayFee = CFeeRate(n); } @@ -1079,10 +1076,7 @@ bool AppInitParameterInteraction() return InitError(strprintf("acceptnonstdtxn is not currently supported for %s chain", chainparams.NetworkIDString())); nBytesPerSigOp = gArgs.GetArg("-bytespersigop", nBytesPerSigOp); -#ifdef ENABLE_WALLET - if (!WalletParameterInteraction()) - return false; -#endif + if (!g_wallet_init_interface->ParameterInteraction()) return false; fIsBareMultisigStd = gArgs.GetBoolArg("-permitbaremultisig", DEFAULT_PERMIT_BAREMULTISIG); fAcceptDatacarrier = gArgs.GetBoolArg("-datacarrier", DEFAULT_ACCEPT_DATACARRIER); @@ -1151,6 +1145,9 @@ static bool LockDataDirectory(bool probeOnly) { // Make sure only a single Bitcoin process is using the data directory. fs::path datadir = GetDataDir(); + if (!DirIsWritable(datadir)) { + return InitError(strprintf(_("Cannot write to data directory '%s'; check permissions."), datadir.string())); + } if (!LockDirectory(datadir, ".lock", probeOnly)) { return InitError(strprintf(_("Cannot obtain a lock on data directory %s. %s is probably already running."), datadir.string(), _(PACKAGE_NAME))); } @@ -1190,7 +1187,7 @@ bool AppInitLockDataDirectory() return true; } -bool AppInitMain(boost::thread_group& threadGroup, CScheduler& scheduler) +bool AppInitMain() { const CChainParams& chainparams = Params(); // ********************************************************* Step 4a: application initialization @@ -1210,7 +1207,7 @@ bool AppInitMain(boost::thread_group& threadGroup, CScheduler& scheduler) } if (!fLogTimestamps) - LogPrintf("Startup time: %s\n", DateTimeStrFormat("%Y-%m-%d %H:%M:%S", GetTime())); + LogPrintf("Startup time: %s\n", FormatISO8601DateTime(GetTime())); LogPrintf("Default data directory %s\n", GetDefaultDataDir().string()); LogPrintf("Using data directory %s\n", GetDataDir().string()); LogPrintf("Using config file %s\n", GetConfigFile(gArgs.GetArg("-conf", BITCOIN_CONF_FILENAME)).string()); @@ -1245,9 +1242,7 @@ bool AppInitMain(boost::thread_group& threadGroup, CScheduler& scheduler) * available in the GUI RPC console even if external calls are disabled. */ RegisterAllCoreRPCCommands(tableRPC); -#ifdef ENABLE_WALLET - RegisterWalletRPC(tableRPC); -#endif + g_wallet_init_interface->RegisterRPC(tableRPC); /* Start the RPC server already. It will be started in "warmup" mode * and not really process calls already (but it will signify connections @@ -1257,17 +1252,15 @@ bool AppInitMain(boost::thread_group& threadGroup, CScheduler& scheduler) if (gArgs.GetBoolArg("-server", false)) { uiInterface.InitMessage.connect(SetRPCWarmupStatus); - if (!AppInitServers(threadGroup)) + if (!AppInitServers()) return InitError(_("Unable to start HTTP server. See debug log for details.")); } int64_t nStart; // ********************************************************* Step 5: verify wallet database integrity -#ifdef ENABLE_WALLET - if (!VerifyWallets()) - return false; -#endif + if (!g_wallet_init_interface->Verify()) return false; + // ********************************************************* Step 6: network initialization // Note that we absolutely cannot open any actual connections // until the very end ("start node") as the UTXO/block state @@ -1410,6 +1403,8 @@ bool AppInitMain(boost::thread_group& threadGroup, CScheduler& scheduler) uiInterface.InitMessage(_("Loading block index...")); + LOCK(cs_main); + nStart = GetTimeMillis(); do { try { @@ -1417,6 +1412,9 @@ bool AppInitMain(boost::thread_group& threadGroup, CScheduler& scheduler) pcoinsTip.reset(); pcoinsdbview.reset(); pcoinscatcher.reset(); + // new CBlockTreeDB tries to delete the existing file, which + // fails if it's still open from the previous loop. Close it first: + pblocktree.reset(); pblocktree.reset(new CBlockTreeDB(nBlockTreeDBCache, false, fReset)); if (fReset) { @@ -1440,8 +1438,9 @@ bool AppInitMain(boost::thread_group& threadGroup, CScheduler& scheduler) // If the loaded chain has a wrong genesis, bail out immediately // (we're likely using a testnet datadir, or the other way around). - if (!mapBlockIndex.empty() && mapBlockIndex.count(chainparams.GetConsensus().hashGenesisBlock) == 0) + if (!mapBlockIndex.empty() && !LookupBlockIndex(chainparams.GetConsensus().hashGenesisBlock)) { return InitError(_("Incorrect or no genesis block found. Wrong datadir for network?")); + } // Check for changed -txindex state if (fTxIndex != gArgs.GetBoolArg("-txindex", DEFAULT_TXINDEX)) { @@ -1511,20 +1510,17 @@ bool AppInitMain(boost::thread_group& threadGroup, CScheduler& scheduler) if (!is_coinsview_empty) { uiInterface.InitMessage(_("Verifying blocks...")); if (fHavePruned && gArgs.GetArg("-checkblocks", DEFAULT_CHECKBLOCKS) > MIN_BLOCKS_TO_KEEP) { - LogPrintf("Prune: pruned datadir may not have more than %d blocks; only checking available blocks", + LogPrintf("Prune: pruned datadir may not have more than %d blocks; only checking available blocks\n", MIN_BLOCKS_TO_KEEP); } - { - LOCK(cs_main); - CBlockIndex* tip = chainActive.Tip(); - RPCNotifyBlockChange(true, tip); - if (tip && tip->nTime > GetAdjustedTime() + 2 * 60 * 60) { - strLoadError = _("The block database contains a block which appears to be from the future. " - "This may be due to your computer's date and time being set incorrectly. " - "Only rebuild the block database if you are sure that your computer's date and time are correct"); - break; - } + CBlockIndex* tip = chainActive.Tip(); + RPCNotifyBlockChange(true, tip); + if (tip && tip->nTime > GetAdjustedTime() + 2 * 60 * 60) { + strLoadError = _("The block database contains a block which appears to be from the future. " + "This may be due to your computer's date and time being set incorrectly. " + "Only rebuild the block database if you are sure that your computer's date and time are correct"); + break; } if (!CVerifyDB().VerifyDB(chainparams, pcoinsdbview.get(), gArgs.GetArg("-checklevel", DEFAULT_CHECKLEVEL), @@ -1582,12 +1578,7 @@ bool AppInitMain(boost::thread_group& threadGroup, CScheduler& scheduler) fFeeEstimatesInitialized = true; // ********************************************************* Step 8: load wallet -#ifdef ENABLE_WALLET - if (!OpenWallets()) - return false; -#else - LogPrintf("No wallet support compiled in!\n"); -#endif + if (!g_wallet_init_interface->Open()) return false; // ********************************************************* Step 9: data directory maintenance @@ -1613,7 +1604,7 @@ bool AppInitMain(boost::thread_group& threadGroup, CScheduler& scheduler) // ********************************************************* Step 10: import blocks - if (!CheckDiskSpace()) + if (!CheckDiskSpace() && !CheckDiskSpace(0, true)) return false; // Either install a handler to notify us when genesis activates, or set fHaveGenesis directly. @@ -1637,12 +1628,19 @@ bool AppInitMain(boost::thread_group& threadGroup, CScheduler& scheduler) // Wait for genesis block to be processed { WaitableLock lock(cs_GenesisWait); - while (!fHaveGenesis) { - condvar_GenesisWait.wait(lock); + // We previously could hang here if StartShutdown() is called prior to + // ThreadImport getting started, so instead we just wait on a timer to + // check ShutdownRequested() regularly. + while (!fHaveGenesis && !ShutdownRequested()) { + condvar_GenesisWait.wait_for(lock, std::chrono::milliseconds(500)); } uiInterface.NotifyBlockTip.disconnect(BlockNotifyGenesisWait); } + if (ShutdownRequested()) { + return false; + } + // ********************************************************* Step 11: start node int chain_active_height; @@ -1656,12 +1654,14 @@ bool AppInitMain(boost::thread_group& threadGroup, CScheduler& scheduler) LogPrintf("nBestHeight = %d\n", chain_active_height); if (gArgs.GetBoolArg("-listenonion", DEFAULT_LISTEN_ONION)) - StartTorControl(threadGroup, scheduler); + StartTorControl(); - Discover(threadGroup); + Discover(); // Map ports with UPnP - MapPort(gArgs.GetBoolArg("-upnp", DEFAULT_UPNP)); + if (gArgs.GetBoolArg("-upnp", DEFAULT_UPNP)) { + StartMapPort(); + } CConnman::Options connOptions; connOptions.nLocalServices = nLocalServices; @@ -1724,9 +1724,7 @@ bool AppInitMain(boost::thread_group& threadGroup, CScheduler& scheduler) SetRPCWarmupFinished(); uiInterface.InitMessage(_("Done loading")); -#ifdef ENABLE_WALLET - StartWallets(scheduler); -#endif + g_wallet_init_interface->Start(scheduler); return true; } |