diff options
Diffstat (limited to 'src/init.cpp')
| -rw-r--r-- | src/init.cpp | 216 |
1 files changed, 117 insertions, 99 deletions
diff --git a/src/init.cpp b/src/init.cpp index 4ad68b73f2..9246f6e71c 100644 --- a/src/init.cpp +++ b/src/init.cpp @@ -350,93 +350,93 @@ void SetupServerArgs() // Set all of the args and their help // When adding new options to the categories, please keep and ensure alphabetical ordering. - // Do not translate _(...) -help-debug options, Many technical terms, and only a very small audience, so is unnecessary stress to translators. - gArgs.AddArg("-?", _("Print this help message and exit"), false, OptionsCategory::OPTIONS); - gArgs.AddArg("-version", _("Print version and exit"), false, OptionsCategory::OPTIONS); - gArgs.AddArg("-alertnotify=<cmd>", _("Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)"), false, OptionsCategory::OPTIONS); - gArgs.AddArg("-assumevalid=<hex>", strprintf(_("If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: %s, testnet: %s)"), defaultChainParams->GetConsensus().defaultAssumeValid.GetHex(), testnetChainParams->GetConsensus().defaultAssumeValid.GetHex()), false, OptionsCategory::OPTIONS); - gArgs.AddArg("-blocksdir=<dir>", _("Specify blocks directory (default: <datadir>/blocks)"), false, OptionsCategory::OPTIONS); - gArgs.AddArg("-blocknotify=<cmd>", _("Execute command when the best block changes (%s in cmd is replaced by block hash)"), false, OptionsCategory::OPTIONS); - gArgs.AddArg("-blockreconstructionextratxn=<n>", strprintf(_("Extra transactions to keep in memory for compact block reconstructions (default: %u)"), DEFAULT_BLOCK_RECONSTRUCTION_EXTRA_TXN), false, OptionsCategory::OPTIONS); - gArgs.AddArg("-blocksonly", strprintf(_("Whether to operate in a blocks only mode (default: %u)"), DEFAULT_BLOCKSONLY), true, OptionsCategory::OPTIONS); - gArgs.AddArg("-conf=<file>", strprintf(_("Specify configuration file. Relative paths will be prefixed by datadir location. (default: %s)"), BITCOIN_CONF_FILENAME), false, OptionsCategory::OPTIONS); - gArgs.AddArg("-datadir=<dir>", _("Specify data directory"), false, OptionsCategory::OPTIONS); + gArgs.AddArg("-?", "Print this help message and exit", false, OptionsCategory::OPTIONS); + gArgs.AddArg("-version", "Print version and exit", false, OptionsCategory::OPTIONS); + gArgs.AddArg("-alertnotify=<cmd>", "Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)", false, OptionsCategory::OPTIONS); + gArgs.AddArg("-assumevalid=<hex>", strprintf("If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: %s, testnet: %s)", defaultChainParams->GetConsensus().defaultAssumeValid.GetHex(), testnetChainParams->GetConsensus().defaultAssumeValid.GetHex()), false, OptionsCategory::OPTIONS); + gArgs.AddArg("-blocksdir=<dir>", "Specify blocks directory (default: <datadir>/blocks)", false, OptionsCategory::OPTIONS); + gArgs.AddArg("-blocknotify=<cmd>", "Execute command when the best block changes (%s in cmd is replaced by block hash)", false, OptionsCategory::OPTIONS); + gArgs.AddArg("-blockreconstructionextratxn=<n>", strprintf("Extra transactions to keep in memory for compact block reconstructions (default: %u)", DEFAULT_BLOCK_RECONSTRUCTION_EXTRA_TXN), false, OptionsCategory::OPTIONS); + gArgs.AddArg("-blocksonly", strprintf("Whether to operate in a blocks only mode (default: %u)", DEFAULT_BLOCKSONLY), true, OptionsCategory::OPTIONS); + gArgs.AddArg("-conf=<file>", strprintf("Specify configuration file. Relative paths will be prefixed by datadir location. (default: %s)", BITCOIN_CONF_FILENAME), false, OptionsCategory::OPTIONS); + gArgs.AddArg("-datadir=<dir>", "Specify data directory", false, OptionsCategory::OPTIONS); gArgs.AddArg("-dbbatchsize", strprintf("Maximum database write batch size in bytes (default: %u)", nDefaultDbBatchSize), true, OptionsCategory::OPTIONS); - gArgs.AddArg("-dbcache=<n>", strprintf(_("Set database cache size in megabytes (%d to %d, default: %d)"), nMinDbCache, nMaxDbCache, nDefaultDbCache), false, OptionsCategory::OPTIONS); - gArgs.AddArg("-debuglogfile=<file>", strprintf(_("Specify location of debug log file. Relative paths will be prefixed by a net-specific datadir location. (default: %s)"), DEFAULT_DEBUGLOGFILE), false, OptionsCategory::OPTIONS); + gArgs.AddArg("-dbcache=<n>", strprintf("Set database cache size in megabytes (%d to %d, default: %d)", nMinDbCache, nMaxDbCache, nDefaultDbCache), false, OptionsCategory::OPTIONS); + gArgs.AddArg("-debuglogfile=<file>", strprintf("Specify location of debug log file. Relative paths will be prefixed by a net-specific datadir location. (default: %s)", DEFAULT_DEBUGLOGFILE), false, OptionsCategory::OPTIONS); gArgs.AddArg("-feefilter", strprintf("Tell other nodes to filter invs to us by our mempool min fee (default: %u)", DEFAULT_FEEFILTER), true, OptionsCategory::OPTIONS); - gArgs.AddArg("-includeconf=<file>", _("Specify additional configuration file, relative to the -datadir path (only useable from configuration file, not command line)"), false, OptionsCategory::OPTIONS); - gArgs.AddArg("-loadblock=<file>", _("Imports blocks from external blk000??.dat file on startup"), false, OptionsCategory::OPTIONS); - gArgs.AddArg("-maxmempool=<n>", strprintf(_("Keep the transaction memory pool below <n> megabytes (default: %u)"), DEFAULT_MAX_MEMPOOL_SIZE), false, OptionsCategory::OPTIONS); - gArgs.AddArg("-maxorphantx=<n>", strprintf(_("Keep at most <n> unconnectable transactions in memory (default: %u)"), DEFAULT_MAX_ORPHAN_TRANSACTIONS), false, OptionsCategory::OPTIONS); - gArgs.AddArg("-mempoolexpiry=<n>", strprintf(_("Do not keep transactions in the mempool longer than <n> hours (default: %u)"), DEFAULT_MEMPOOL_EXPIRY), false, OptionsCategory::OPTIONS); + gArgs.AddArg("-includeconf=<file>", "Specify additional configuration file, relative to the -datadir path (only useable from configuration file, not command line)", false, OptionsCategory::OPTIONS); + gArgs.AddArg("-loadblock=<file>", "Imports blocks from external blk000??.dat file on startup", false, OptionsCategory::OPTIONS); + gArgs.AddArg("-maxmempool=<n>", strprintf("Keep the transaction memory pool below <n> megabytes (default: %u)", DEFAULT_MAX_MEMPOOL_SIZE), false, OptionsCategory::OPTIONS); + gArgs.AddArg("-maxorphantx=<n>", strprintf("Keep at most <n> unconnectable transactions in memory (default: %u)", DEFAULT_MAX_ORPHAN_TRANSACTIONS), false, OptionsCategory::OPTIONS); + gArgs.AddArg("-mempoolexpiry=<n>", strprintf("Do not keep transactions in the mempool longer than <n> hours (default: %u)", DEFAULT_MEMPOOL_EXPIRY), false, OptionsCategory::OPTIONS); gArgs.AddArg("-minimumchainwork=<hex>", strprintf("Minimum work assumed to exist on a valid chain in hex (default: %s, testnet: %s)", defaultChainParams->GetConsensus().nMinimumChainWork.GetHex(), testnetChainParams->GetConsensus().nMinimumChainWork.GetHex()), true, OptionsCategory::OPTIONS); - gArgs.AddArg("-par=<n>", strprintf(_("Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d)"), + gArgs.AddArg("-par=<n>", strprintf("Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d)", -GetNumCores(), MAX_SCRIPTCHECK_THREADS, DEFAULT_SCRIPTCHECK_THREADS), false, OptionsCategory::OPTIONS); - gArgs.AddArg("-persistmempool", strprintf(_("Whether to save the mempool on shutdown and load on restart (default: %u)"), DEFAULT_PERSIST_MEMPOOL), false, OptionsCategory::OPTIONS); + gArgs.AddArg("-persistmempool", strprintf("Whether to save the mempool on shutdown and load on restart (default: %u)", DEFAULT_PERSIST_MEMPOOL), false, OptionsCategory::OPTIONS); #ifndef WIN32 - gArgs.AddArg("-pid=<file>", strprintf(_("Specify pid file. Relative paths will be prefixed by a net-specific datadir location. (default: %s)"), BITCOIN_PID_FILENAME), false, OptionsCategory::OPTIONS); + gArgs.AddArg("-pid=<file>", strprintf("Specify pid file. Relative paths will be prefixed by a net-specific datadir location. (default: %s)", BITCOIN_PID_FILENAME), false, OptionsCategory::OPTIONS); #endif - gArgs.AddArg("-prune=<n>", strprintf(_("Reduce storage requirements by enabling pruning (deleting) of old blocks. This allows the pruneblockchain RPC to be called to delete specific blocks, and enables automatic pruning of old blocks if a target size in MiB is provided. This mode is incompatible with -txindex and -rescan. " + gArgs.AddArg("-prune=<n>", strprintf("Reduce storage requirements by enabling pruning (deleting) of old blocks. This allows the pruneblockchain RPC to be called to delete specific blocks, and enables automatic pruning of old blocks if a target size in MiB is provided. This mode is incompatible with -txindex and -rescan. " "Warning: Reverting this setting requires re-downloading the entire blockchain. " - "(default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >%u = automatically prune block files to stay under the specified target size in MiB)"), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024), false, OptionsCategory::OPTIONS); - gArgs.AddArg("-reindex", _("Rebuild chain state and block index from the blk*.dat files on disk"), false, OptionsCategory::OPTIONS); - gArgs.AddArg("-reindex-chainstate", _("Rebuild chain state from the currently indexed blocks"), false, OptionsCategory::OPTIONS); + "(default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >%u = automatically prune block files to stay under the specified target size in MiB)", MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024), false, OptionsCategory::OPTIONS); + gArgs.AddArg("-reindex", "Rebuild chain state and block index from the blk*.dat files on disk", false, OptionsCategory::OPTIONS); + gArgs.AddArg("-reindex-chainstate", "Rebuild chain state from the currently indexed blocks", false, OptionsCategory::OPTIONS); #ifndef WIN32 - gArgs.AddArg("-sysperms", _("Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality)"), false, OptionsCategory::OPTIONS); + gArgs.AddArg("-sysperms", "Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality)", false, OptionsCategory::OPTIONS); #endif - gArgs.AddArg("-txindex", strprintf(_("Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u)"), DEFAULT_TXINDEX), false, OptionsCategory::OPTIONS); - - gArgs.AddArg("-addnode=<ip>", _("Add a node to connect to and attempt to keep the connection open (see the `addnode` RPC command help for more info)"), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-banscore=<n>", strprintf(_("Threshold for disconnecting misbehaving peers (default: %u)"), DEFAULT_BANSCORE_THRESHOLD), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-bantime=<n>", strprintf(_("Number of seconds to keep misbehaving peers from reconnecting (default: %u)"), DEFAULT_MISBEHAVING_BANTIME), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-bind=<addr>", _("Bind to given address and always listen on it. Use [host]:port notation for IPv6"), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-connect=<ip>", _("Connect only to the specified node(s); -connect=0 disables automatic connections (the rules for this peer are the same as for -addnode)"), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-discover", _("Discover own IP addresses (default: 1 when listening and no -externalip or -proxy)"), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-dns", _("Allow DNS lookups for -addnode, -seednode and -connect") + " " + strprintf(_("(default: %u)"), DEFAULT_NAME_LOOKUP), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-dnsseed", _("Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect used)"), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-externalip=<ip>", _("Specify your own public address"), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-forcednsseed", strprintf(_("Always query for peer addresses via DNS lookup (default: %u)"), DEFAULT_FORCEDNSSEED), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-listen", _("Accept connections from outside (default: 1 if no -proxy or -connect)"), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-listenonion", strprintf(_("Automatically create Tor hidden service (default: %d)"), DEFAULT_LISTEN_ONION), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-maxconnections=<n>", strprintf(_("Maintain at most <n> connections to peers (default: %u)"), DEFAULT_MAX_PEER_CONNECTIONS), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-maxreceivebuffer=<n>", strprintf(_("Maximum per-connection receive buffer, <n>*1000 bytes (default: %u)"), DEFAULT_MAXRECEIVEBUFFER), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-maxsendbuffer=<n>", strprintf(_("Maximum per-connection send buffer, <n>*1000 bytes (default: %u)"), DEFAULT_MAXSENDBUFFER), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-maxtimeadjustment", strprintf(_("Maximum allowed median peer time offset adjustment. Local perspective of time may be influenced by peers forward or backward by this amount. (default: %u seconds)"), DEFAULT_MAX_TIME_ADJUSTMENT), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-maxuploadtarget=<n>", strprintf(_("Tries to keep outbound traffic under the given target (in MiB per 24h), 0 = no limit (default: %d)"), DEFAULT_MAX_UPLOAD_TARGET), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-onion=<ip:port>", strprintf(_("Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s)"), "-proxy"), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-onlynet=<net>", _("Only connect to nodes in network <net> (ipv4, ipv6 or onion)"), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-peerbloomfilters", strprintf(_("Support filtering of blocks and transaction with bloom filters (default: %u)"), DEFAULT_PEERBLOOMFILTERS), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-permitbaremultisig", strprintf(_("Relay non-P2SH multisig (default: %u)"), DEFAULT_PERMIT_BAREMULTISIG), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-port=<port>", strprintf(_("Listen for connections on <port> (default: %u or testnet: %u)"), defaultChainParams->GetDefaultPort(), testnetChainParams->GetDefaultPort()), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-proxy=<ip:port>", _("Connect through SOCKS5 proxy"), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-proxyrandomize", strprintf(_("Randomize credentials for every proxy connection. This enables Tor stream isolation (default: %u)"), DEFAULT_PROXYRANDOMIZE), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-seednode=<ip>", _("Connect to a node to retrieve peer addresses, and disconnect"), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-timeout=<n>", strprintf(_("Specify connection timeout in milliseconds (minimum: 1, default: %d)"), DEFAULT_CONNECT_TIMEOUT), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-torcontrol=<ip>:<port>", strprintf(_("Tor control port to use if onion listening enabled (default: %s)"), DEFAULT_TOR_CONTROL), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-torpassword=<pass>", _("Tor control port password (default: empty)"), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-txindex", strprintf("Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u)", DEFAULT_TXINDEX), false, OptionsCategory::OPTIONS); + + gArgs.AddArg("-addnode=<ip>", "Add a node to connect to and attempt to keep the connection open (see the `addnode` RPC command help for more info)", false, OptionsCategory::CONNECTION); + gArgs.AddArg("-banscore=<n>", strprintf("Threshold for disconnecting misbehaving peers (default: %u)", DEFAULT_BANSCORE_THRESHOLD), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-bantime=<n>", strprintf("Number of seconds to keep misbehaving peers from reconnecting (default: %u)", DEFAULT_MISBEHAVING_BANTIME), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-bind=<addr>", "Bind to given address and always listen on it. Use [host]:port notation for IPv6", false, OptionsCategory::CONNECTION); + gArgs.AddArg("-connect=<ip>", "Connect only to the specified node(s); -connect=0 disables automatic connections (the rules for this peer are the same as for -addnode)", false, OptionsCategory::CONNECTION); + gArgs.AddArg("-discover", "Discover own IP addresses (default: 1 when listening and no -externalip or -proxy)", false, OptionsCategory::CONNECTION); + gArgs.AddArg("-dns", strprintf("Allow DNS lookups for -addnode, -seednode and -connect (default: %u)", DEFAULT_NAME_LOOKUP), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-dnsseed", "Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect used)", false, OptionsCategory::CONNECTION); + gArgs.AddArg("-enablebip61", strprintf("Send reject messages per BIP61 (default: %u)", DEFAULT_ENABLE_BIP61), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-externalip=<ip>", "Specify your own public address", false, OptionsCategory::CONNECTION); + gArgs.AddArg("-forcednsseed", strprintf("Always query for peer addresses via DNS lookup (default: %u)", DEFAULT_FORCEDNSSEED), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-listen", "Accept connections from outside (default: 1 if no -proxy or -connect)", false, OptionsCategory::CONNECTION); + gArgs.AddArg("-listenonion", strprintf("Automatically create Tor hidden service (default: %d)", DEFAULT_LISTEN_ONION), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-maxconnections=<n>", strprintf("Maintain at most <n> connections to peers (default: %u)", DEFAULT_MAX_PEER_CONNECTIONS), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-maxreceivebuffer=<n>", strprintf("Maximum per-connection receive buffer, <n>*1000 bytes (default: %u)", DEFAULT_MAXRECEIVEBUFFER), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-maxsendbuffer=<n>", strprintf("Maximum per-connection send buffer, <n>*1000 bytes (default: %u)", DEFAULT_MAXSENDBUFFER), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-maxtimeadjustment", strprintf("Maximum allowed median peer time offset adjustment. Local perspective of time may be influenced by peers forward or backward by this amount. (default: %u seconds)", DEFAULT_MAX_TIME_ADJUSTMENT), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-maxuploadtarget=<n>", strprintf("Tries to keep outbound traffic under the given target (in MiB per 24h), 0 = no limit (default: %d)", DEFAULT_MAX_UPLOAD_TARGET), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-onion=<ip:port>", "Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: -proxy)", false, OptionsCategory::CONNECTION); + gArgs.AddArg("-onlynet=<net>", "Only connect to nodes in network <net> (ipv4, ipv6 or onion)", false, OptionsCategory::CONNECTION); + gArgs.AddArg("-peerbloomfilters", strprintf("Support filtering of blocks and transaction with bloom filters (default: %u)", DEFAULT_PEERBLOOMFILTERS), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-permitbaremultisig", strprintf("Relay non-P2SH multisig (default: %u)", DEFAULT_PERMIT_BAREMULTISIG), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-port=<port>", strprintf("Listen for connections on <port> (default: %u or testnet: %u)", defaultChainParams->GetDefaultPort(), testnetChainParams->GetDefaultPort()), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-proxy=<ip:port>", "Connect through SOCKS5 proxy", false, OptionsCategory::CONNECTION); + gArgs.AddArg("-proxyrandomize", strprintf("Randomize credentials for every proxy connection. This enables Tor stream isolation (default: %u)", DEFAULT_PROXYRANDOMIZE), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-seednode=<ip>", "Connect to a node to retrieve peer addresses, and disconnect", false, OptionsCategory::CONNECTION); + gArgs.AddArg("-timeout=<n>", strprintf("Specify connection timeout in milliseconds (minimum: 1, default: %d)", DEFAULT_CONNECT_TIMEOUT), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-torcontrol=<ip>:<port>", strprintf("Tor control port to use if onion listening enabled (default: %s)", DEFAULT_TOR_CONTROL), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-torpassword=<pass>", "Tor control port password (default: empty)", false, OptionsCategory::CONNECTION); #ifdef USE_UPNP #if USE_UPNP - gArgs.AddArg("-upnp", _("Use UPnP to map the listening port (default: 1 when listening and no -proxy)"), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-upnp", "Use UPnP to map the listening port (default: 1 when listening and no -proxy)", false, OptionsCategory::CONNECTION); #else - gArgs.AddArg("-upnp", strprintf(_("Use UPnP to map the listening port (default: %u)"), 0), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-upnp", strprintf("Use UPnP to map the listening port (default: %u)", 0), false, OptionsCategory::CONNECTION); #endif #endif - gArgs.AddArg("-whitebind=<addr>", _("Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6"), false, OptionsCategory::CONNECTION); - gArgs.AddArg("-whitelist=<IP address or network>", _("Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple times.") + - " " + _("Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway"), false, OptionsCategory::CONNECTION); + gArgs.AddArg("-whitebind=<addr>", "Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6", false, OptionsCategory::CONNECTION); + gArgs.AddArg("-whitelist=<IP address or network>", "Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple times." + " Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway", false, OptionsCategory::CONNECTION); g_wallet_init_interface.AddWalletOptions(); #if ENABLE_ZMQ - gArgs.AddArg("-zmqpubhashblock=<address>", _("Enable publish hash block in <address>"), false, OptionsCategory::ZMQ); - gArgs.AddArg("-zmqpubhashtx=<address>", _("Enable publish hash transaction in <address>"), false, OptionsCategory::ZMQ); - gArgs.AddArg("-zmqpubrawblock=<address>", _("Enable publish raw block in <address>"), false, OptionsCategory::ZMQ); - gArgs.AddArg("-zmqpubrawtx=<address>", _("Enable publish raw transaction in <address>"), false, OptionsCategory::ZMQ); + gArgs.AddArg("-zmqpubhashblock=<address>", "Enable publish hash block in <address>", false, OptionsCategory::ZMQ); + gArgs.AddArg("-zmqpubhashtx=<address>", "Enable publish hash transaction in <address>", false, OptionsCategory::ZMQ); + gArgs.AddArg("-zmqpubrawblock=<address>", "Enable publish raw block in <address>", false, OptionsCategory::ZMQ); + gArgs.AddArg("-zmqpubrawtx=<address>", "Enable publish raw transaction in <address>", false, OptionsCategory::ZMQ); #endif - gArgs.AddArg("-checkblocks=<n>", strprintf(_("How many blocks to check at startup (default: %u, 0 = all)"), DEFAULT_CHECKBLOCKS), true, OptionsCategory::DEBUG_TEST); - gArgs.AddArg("-checklevel=<n>", strprintf(_("How thorough the block verification of -checkblocks is (0-4, default: %u)"), DEFAULT_CHECKLEVEL), true, OptionsCategory::DEBUG_TEST); + gArgs.AddArg("-checkblocks=<n>", strprintf("How many blocks to check at startup (default: %u, 0 = all)", DEFAULT_CHECKBLOCKS), true, OptionsCategory::DEBUG_TEST); + gArgs.AddArg("-checklevel=<n>", strprintf("How thorough the block verification of -checkblocks is (0-4, default: %u)", DEFAULT_CHECKLEVEL), true, OptionsCategory::DEBUG_TEST); gArgs.AddArg("-checkblockindex", strprintf("Do a full consistency check for mapBlockIndex, setBlockIndexCandidates, chainActive and mapBlocksUnlinked occasionally. (default: %u)", defaultChainParams->DefaultConsistencyChecks()), true, OptionsCategory::DEBUG_TEST); gArgs.AddArg("-checkmempool=<n>", strprintf("Run checks every <n> transactions (default: %u)", defaultChainParams->DefaultConsistencyChecks()), true, OptionsCategory::DEBUG_TEST); gArgs.AddArg("-checkpoints", strprintf("Disable expensive verification for known chain history (default: %u)", DEFAULT_CHECKPOINTS_ENABLED), true, OptionsCategory::DEBUG_TEST); @@ -450,55 +450,72 @@ void SetupServerArgs() gArgs.AddArg("-limitdescendantsize=<n>", strprintf("Do not accept transactions if any ancestor would have more than <n> kilobytes of in-mempool descendants (default: %u).", DEFAULT_DESCENDANT_SIZE_LIMIT), true, OptionsCategory::DEBUG_TEST); gArgs.AddArg("-vbparams=deployment:start:end", "Use given start/end times for specified version bits deployment (regtest-only)", true, OptionsCategory::DEBUG_TEST); gArgs.AddArg("-addrmantest", "Allows to test address relay on localhost", true, OptionsCategory::DEBUG_TEST); - gArgs.AddArg("-debug=<category>", strprintf(_("Output debugging information (default: %u, supplying <category> is optional)"), 0) + ". " + - _("If <category> is not supplied or if <category> = 1, output all debugging information.") + " " + _("<category> can be:") + " " + ListLogCategories() + ".", false, OptionsCategory::DEBUG_TEST); - gArgs.AddArg("-debugexclude=<category>", strprintf(_("Exclude debugging information for a category. Can be used in conjunction with -debug=1 to output debug logs for all categories except one or more specified categories.")), false, OptionsCategory::DEBUG_TEST); - gArgs.AddArg("-help-debug", _("Show all debugging options (usage: --help -help-debug)"), false, OptionsCategory::DEBUG_TEST); - gArgs.AddArg("-logips", strprintf(_("Include IP addresses in debug output (default: %u)"), DEFAULT_LOGIPS), false, OptionsCategory::DEBUG_TEST); - gArgs.AddArg("-logtimestamps", strprintf(_("Prepend debug output with timestamp (default: %u)"), DEFAULT_LOGTIMESTAMPS), false, OptionsCategory::DEBUG_TEST); + gArgs.AddArg("-debug=<category>", strprintf("Output debugging information (default: %u, supplying <category> is optional)", 0) + ". " + + "If <category> is not supplied or if <category> = 1, output all debugging information. <category> can be: " + ListLogCategories() + ".", false, OptionsCategory::DEBUG_TEST); + gArgs.AddArg("-debugexclude=<category>", strprintf("Exclude debugging information for a category. Can be used in conjunction with -debug=1 to output debug logs for all categories except one or more specified categories."), false, OptionsCategory::DEBUG_TEST); + gArgs.AddArg("-help-debug", "Show all debugging options (usage: --help -help-debug)", false, OptionsCategory::DEBUG_TEST); + gArgs.AddArg("-logips", strprintf("Include IP addresses in debug output (default: %u)", DEFAULT_LOGIPS), false, OptionsCategory::DEBUG_TEST); + gArgs.AddArg("-logtimestamps", strprintf("Prepend debug output with timestamp (default: %u)", DEFAULT_LOGTIMESTAMPS), false, OptionsCategory::DEBUG_TEST); gArgs.AddArg("-logtimemicros", strprintf("Add microsecond precision to debug timestamps (default: %u)", DEFAULT_LOGTIMEMICROS), true, OptionsCategory::DEBUG_TEST); gArgs.AddArg("-mocktime=<n>", "Replace actual time with <n> seconds since epoch (default: 0)", true, OptionsCategory::DEBUG_TEST); gArgs.AddArg("-maxsigcachesize=<n>", strprintf("Limit sum of signature cache and script execution cache sizes to <n> MiB (default: %u)", DEFAULT_MAX_SIG_CACHE_SIZE), true, OptionsCategory::DEBUG_TEST); gArgs.AddArg("-maxtipage=<n>", strprintf("Maximum tip age in seconds to consider node in initial block download (default: %u)", DEFAULT_MAX_TIP_AGE), true, OptionsCategory::DEBUG_TEST); - gArgs.AddArg("-maxtxfee=<amt>", strprintf(_("Maximum total fees (in %s) to use in a single wallet transaction or raw transaction; setting this too low may abort large transactions (default: %s)"), + gArgs.AddArg("-maxtxfee=<amt>", strprintf("Maximum total fees (in %s) to use in a single wallet transaction or raw transaction; setting this too low may abort large transactions (default: %s)", CURRENCY_UNIT, FormatMoney(DEFAULT_TRANSACTION_MAXFEE)), false, OptionsCategory::DEBUG_TEST); gArgs.AddArg("-printpriority", strprintf("Log transaction fee per kB when mining blocks (default: %u)", DEFAULT_PRINTPRIORITY), true, OptionsCategory::DEBUG_TEST); - gArgs.AddArg("-printtoconsole", _("Send trace/debug info to console instead of debug.log file"), false, OptionsCategory::DEBUG_TEST); - gArgs.AddArg("-shrinkdebugfile", _("Shrink debug.log file on client startup (default: 1 when no -debug)"), false, OptionsCategory::DEBUG_TEST); - gArgs.AddArg("-uacomment=<cmt>", _("Append comment to the user agent string"), false, OptionsCategory::DEBUG_TEST); + gArgs.AddArg("-printtoconsole", "Send trace/debug info to console instead of debug.log file", false, OptionsCategory::DEBUG_TEST); + gArgs.AddArg("-shrinkdebugfile", "Shrink debug.log file on client startup (default: 1 when no -debug)", false, OptionsCategory::DEBUG_TEST); + gArgs.AddArg("-uacomment=<cmt>", "Append comment to the user agent string", false, OptionsCategory::DEBUG_TEST); SetupChainParamsBaseOptions(); gArgs.AddArg("-acceptnonstdtxn", strprintf("Relay and mine \"non-standard\" transactions (%sdefault: %u)", "testnet/regtest only; ", !testnetChainParams->RequireStandard()), true, OptionsCategory::NODE_RELAY); gArgs.AddArg("-incrementalrelayfee=<amt>", strprintf("Fee rate (in %s/kB) used to define cost of relay, used for mempool limiting and BIP 125 replacement. (default: %s)", CURRENCY_UNIT, FormatMoney(DEFAULT_INCREMENTAL_RELAY_FEE)), true, OptionsCategory::NODE_RELAY); gArgs.AddArg("-dustrelayfee=<amt>", strprintf("Fee rate (in %s/kB) used to defined dust, the value of an output such that it will cost more than its value in fees at this fee rate to spend it. (default: %s)", CURRENCY_UNIT, FormatMoney(DUST_RELAY_TX_FEE)), true, OptionsCategory::NODE_RELAY); - gArgs.AddArg("-bytespersigop", strprintf(_("Equivalent bytes per sigop in transactions for relay and mining (default: %u)"), DEFAULT_BYTES_PER_SIGOP), false, OptionsCategory::NODE_RELAY); - gArgs.AddArg("-datacarrier", strprintf(_("Relay and mine data carrier transactions (default: %u)"), DEFAULT_ACCEPT_DATACARRIER), false, OptionsCategory::NODE_RELAY); - gArgs.AddArg("-datacarriersize", strprintf(_("Maximum size of data in data carrier transactions we relay and mine (default: %u)"), MAX_OP_RETURN_RELAY), false, OptionsCategory::NODE_RELAY); - gArgs.AddArg("-mempoolreplacement", strprintf(_("Enable transaction replacement in the memory pool (default: %u)"), DEFAULT_ENABLE_REPLACEMENT), false, OptionsCategory::NODE_RELAY); - gArgs.AddArg("-minrelaytxfee=<amt>", strprintf(_("Fees (in %s/kB) smaller than this are considered zero fee for relaying, mining and transaction creation (default: %s)"), + gArgs.AddArg("-bytespersigop", strprintf("Equivalent bytes per sigop in transactions for relay and mining (default: %u)", DEFAULT_BYTES_PER_SIGOP), false, OptionsCategory::NODE_RELAY); + gArgs.AddArg("-datacarrier", strprintf("Relay and mine data carrier transactions (default: %u)", DEFAULT_ACCEPT_DATACARRIER), false, OptionsCategory::NODE_RELAY); + gArgs.AddArg("-datacarriersize", strprintf("Maximum size of data in data carrier transactions we relay and mine (default: %u)", MAX_OP_RETURN_RELAY), false, OptionsCategory::NODE_RELAY); + gArgs.AddArg("-mempoolreplacement", strprintf("Enable transaction replacement in the memory pool (default: %u)", DEFAULT_ENABLE_REPLACEMENT), false, OptionsCategory::NODE_RELAY); + gArgs.AddArg("-minrelaytxfee=<amt>", strprintf("Fees (in %s/kB) smaller than this are considered zero fee for relaying, mining and transaction creation (default: %s)", CURRENCY_UNIT, FormatMoney(DEFAULT_MIN_RELAY_TX_FEE)), false, OptionsCategory::NODE_RELAY); - gArgs.AddArg("-whitelistforcerelay", strprintf(_("Force relay of transactions from whitelisted peers even if they violate local relay policy (default: %d)"), DEFAULT_WHITELISTFORCERELAY), false, OptionsCategory::NODE_RELAY); - gArgs.AddArg("-whitelistrelay", strprintf(_("Accept relayed transactions received from whitelisted peers even when not relaying transactions (default: %d)"), DEFAULT_WHITELISTRELAY), false, OptionsCategory::NODE_RELAY); + gArgs.AddArg("-whitelistforcerelay", strprintf("Force relay of transactions from whitelisted peers even if they violate local relay policy (default: %d)", DEFAULT_WHITELISTFORCERELAY), false, OptionsCategory::NODE_RELAY); + gArgs.AddArg("-whitelistrelay", strprintf("Accept relayed transactions received from whitelisted peers even when not relaying transactions (default: %d)", DEFAULT_WHITELISTRELAY), false, OptionsCategory::NODE_RELAY); - gArgs.AddArg("-blockmaxweight=<n>", strprintf(_("Set maximum BIP141 block weight (default: %d)"), DEFAULT_BLOCK_MAX_WEIGHT), false, OptionsCategory::BLOCK_CREATION); - gArgs.AddArg("-blockmintxfee=<amt>", strprintf(_("Set lowest fee rate (in %s/kB) for transactions to be included in block creation. (default: %s)"), CURRENCY_UNIT, FormatMoney(DEFAULT_BLOCK_MIN_TX_FEE)), false, OptionsCategory::BLOCK_CREATION); + gArgs.AddArg("-blockmaxweight=<n>", strprintf("Set maximum BIP141 block weight (default: %d)", DEFAULT_BLOCK_MAX_WEIGHT), false, OptionsCategory::BLOCK_CREATION); + gArgs.AddArg("-blockmintxfee=<amt>", strprintf("Set lowest fee rate (in %s/kB) for transactions to be included in block creation. (default: %s)", CURRENCY_UNIT, FormatMoney(DEFAULT_BLOCK_MIN_TX_FEE)), false, OptionsCategory::BLOCK_CREATION); gArgs.AddArg("-blockversion=<n>", "Override block version to test forking scenarios", true, OptionsCategory::BLOCK_CREATION); - gArgs.AddArg("-rest", strprintf(_("Accept public REST requests (default: %u)"), DEFAULT_REST_ENABLE), false, OptionsCategory::RPC); - gArgs.AddArg("-rpcallowip=<ip>", _("Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times"), false, OptionsCategory::RPC); - gArgs.AddArg("-rpcauth=<userpw>", _("Username and hashed password for JSON-RPC connections. The field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A canonical python script is included in share/rpcuser. The client then connects normally using the rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This option can be specified multiple times"), false, OptionsCategory::RPC); - gArgs.AddArg("-rpcbind=<addr>[:port]", _("Bind to given address to listen for JSON-RPC connections. This option is ignored unless -rpcallowip is also passed. Port is optional and overrides -rpcport. Use [host]:port notation for IPv6. This option can be specified multiple times (default: 127.0.0.1 and ::1 i.e., localhost, or if -rpcallowip has been specified, 0.0.0.0 and :: i.e., all addresses)"), false, OptionsCategory::RPC); - gArgs.AddArg("-rpccookiefile=<loc>", _("Location of the auth cookie. Relative paths will be prefixed by a net-specific datadir location. (default: data dir)"), false, OptionsCategory::RPC); - gArgs.AddArg("-rpcpassword=<pw>", _("Password for JSON-RPC connections"), false, OptionsCategory::RPC); - gArgs.AddArg("-rpcport=<port>", strprintf(_("Listen for JSON-RPC connections on <port> (default: %u or testnet: %u)"), defaultBaseParams->RPCPort(), testnetBaseParams->RPCPort()), false, OptionsCategory::RPC); - gArgs.AddArg("-rpcserialversion", strprintf(_("Sets the serialization of raw transaction or block hex returned in non-verbose mode, non-segwit(0) or segwit(1) (default: %d)"), DEFAULT_RPC_SERIALIZE_VERSION), false, OptionsCategory::RPC); + gArgs.AddArg("-rest", strprintf("Accept public REST requests (default: %u)", DEFAULT_REST_ENABLE), false, OptionsCategory::RPC); + gArgs.AddArg("-rpcallowip=<ip>", "Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times", false, OptionsCategory::RPC); + gArgs.AddArg("-rpcauth=<userpw>", "Username and hashed password for JSON-RPC connections. The field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A canonical python script is included in share/rpcuser. The client then connects normally using the rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This option can be specified multiple times", false, OptionsCategory::RPC); + gArgs.AddArg("-rpcbind=<addr>[:port]", "Bind to given address to listen for JSON-RPC connections. This option is ignored unless -rpcallowip is also passed. Port is optional and overrides -rpcport. Use [host]:port notation for IPv6. This option can be specified multiple times (default: 127.0.0.1 and ::1 i.e., localhost, or if -rpcallowip has been specified, 0.0.0.0 and :: i.e., all addresses)", false, OptionsCategory::RPC); + gArgs.AddArg("-rpccookiefile=<loc>", "Location of the auth cookie. Relative paths will be prefixed by a net-specific datadir location. (default: data dir)", false, OptionsCategory::RPC); + gArgs.AddArg("-rpcpassword=<pw>", "Password for JSON-RPC connections", false, OptionsCategory::RPC); + gArgs.AddArg("-rpcport=<port>", strprintf("Listen for JSON-RPC connections on <port> (default: %u or testnet: %u)", defaultBaseParams->RPCPort(), testnetBaseParams->RPCPort()), false, OptionsCategory::RPC); + gArgs.AddArg("-rpcserialversion", strprintf("Sets the serialization of raw transaction or block hex returned in non-verbose mode, non-segwit(0) or segwit(1) (default: %d)", DEFAULT_RPC_SERIALIZE_VERSION), false, OptionsCategory::RPC); gArgs.AddArg("-rpcservertimeout=<n>", strprintf("Timeout during HTTP requests (default: %d)", DEFAULT_HTTP_SERVER_TIMEOUT), true, OptionsCategory::RPC); - gArgs.AddArg("-rpcthreads=<n>", strprintf(_("Set the number of threads to service RPC calls (default: %d)"), DEFAULT_HTTP_THREADS), false, OptionsCategory::RPC); - gArgs.AddArg("-rpcuser=<user>", _("Username for JSON-RPC connections"), false, OptionsCategory::RPC); + gArgs.AddArg("-rpcthreads=<n>", strprintf("Set the number of threads to service RPC calls (default: %d)", DEFAULT_HTTP_THREADS), false, OptionsCategory::RPC); + gArgs.AddArg("-rpcuser=<user>", "Username for JSON-RPC connections", false, OptionsCategory::RPC); gArgs.AddArg("-rpcworkqueue=<n>", strprintf("Set the depth of the work queue to service RPC calls (default: %d)", DEFAULT_HTTP_WORKQUEUE), true, OptionsCategory::RPC); - gArgs.AddArg("-server", _("Accept command line and JSON-RPC commands"), false, OptionsCategory::RPC); + gArgs.AddArg("-server", "Accept command line and JSON-RPC commands", false, OptionsCategory::RPC); + + // Hidden options + gArgs.AddArg("-rpcssl", "", false, OptionsCategory::HIDDEN); + gArgs.AddArg("-benchmark", "", false, OptionsCategory::HIDDEN); + gArgs.AddArg("-h", "", false, OptionsCategory::HIDDEN); + gArgs.AddArg("-help", "", false, OptionsCategory::HIDDEN); + gArgs.AddArg("-socks", "", false, OptionsCategory::HIDDEN); + gArgs.AddArg("-tor", "", false, OptionsCategory::HIDDEN); + gArgs.AddArg("-debugnet", "", false, OptionsCategory::HIDDEN); + gArgs.AddArg("-whitelistalwaysrelay", "", false, OptionsCategory::HIDDEN); + gArgs.AddArg("-prematurewitness", "", false, OptionsCategory::HIDDEN); + gArgs.AddArg("-walletprematurewitness", "", false, OptionsCategory::HIDDEN); + gArgs.AddArg("-promiscuousmempoolflags", "", false, OptionsCategory::HIDDEN); + gArgs.AddArg("-blockminsize", "", false, OptionsCategory::HIDDEN); + gArgs.AddArg("-dbcrashratio", "", false, OptionsCategory::HIDDEN); + gArgs.AddArg("-forcecompactdb", "", false, OptionsCategory::HIDDEN); + gArgs.AddArg("-usehd", "", false, OptionsCategory::HIDDEN); } std::string LicenseInfo() @@ -1099,6 +1116,8 @@ bool AppInitParameterInteraction() if (gArgs.GetBoolArg("-peerbloomfilters", DEFAULT_PEERBLOOMFILTERS)) nLocalServices = ServiceFlags(nLocalServices | NODE_BLOOM); + g_enable_bip61 = gArgs.GetBoolArg("-enablebip61", DEFAULT_ENABLE_BIP61); + if (gArgs.GetArg("-rpcserialversion", DEFAULT_RPC_SERIALIZE_VERSION) < 0) return InitError("rpcserialversion must be non-negative."); @@ -1587,8 +1606,7 @@ bool AppInitMain() // ********************************************************* Step 8: start indexers if (gArgs.GetBoolArg("-txindex", DEFAULT_TXINDEX)) { - auto txindex_db = MakeUnique<TxIndexDB>(nTxIndexCache, false, fReindex); - g_txindex = MakeUnique<TxIndex>(std::move(txindex_db)); + g_txindex = MakeUnique<TxIndex>(nTxIndexCache, false, fReindex); g_txindex->Start(); } |