diff options
Diffstat (limited to 'src/init.cpp')
| -rw-r--r-- | src/init.cpp | 274 |
1 files changed, 56 insertions, 218 deletions
diff --git a/src/init.cpp b/src/init.cpp index 896cb774b5..481c3c7d63 100644 --- a/src/init.cpp +++ b/src/init.cpp @@ -21,10 +21,11 @@ #include <httprpc.h> #include <httpserver.h> #include <index/blockfilterindex.h> +#include <index/coinstatsindex.h> #include <index/txindex.h> +#include <init/common.h> #include <interfaces/chain.h> #include <interfaces/node.h> -#include <key.h> #include <mapport.h> #include <miner.h> #include <net.h> @@ -152,8 +153,6 @@ static fs::path GetPidFile(const ArgsManager& args) // shutdown thing. // -static std::unique_ptr<ECCVerifyHandle> globalVerifyHandle; - void Interrupt(NodeContext& node) { InterruptHTTPServer(); @@ -168,6 +167,9 @@ void Interrupt(NodeContext& node) g_txindex->Interrupt(); } ForEachBlockFilterIndex([](BlockFilterIndex& index) { index.Interrupt(); }); + if (g_coin_stats_index) { + g_coin_stats_index->Interrupt(); + } } void Shutdown(NodeContext& node) @@ -197,20 +199,7 @@ void Shutdown(NodeContext& node) // Because these depend on each-other, we make sure that neither can be // using the other before destroying them. if (node.peerman) UnregisterValidationInterface(node.peerman.get()); - // Follow the lock order requirements: - // * CheckForStaleTipAndEvictPeers locks cs_main before indirectly calling GetExtraFullOutboundCount - // which locks cs_vNodes. - // * ProcessMessage locks cs_main and g_cs_orphans before indirectly calling ForEachNode which - // locks cs_vNodes. - // * CConnman::Stop calls DeleteNode, which calls FinalizeNode, which locks cs_main and calls - // EraseOrphansFor, which locks g_cs_orphans. - // - // Thus the implicit locking order requirement is: (1) cs_main, (2) g_cs_orphans, (3) cs_vNodes. - if (node.connman) { - node.connman->StopThreads(); - LOCK2(::cs_main, ::g_cs_orphans); - node.connman->StopNodes(); - } + if (node.connman) node.connman->Stop(); StopTorControl(); @@ -253,6 +242,10 @@ void Shutdown(NodeContext& node) g_txindex->Stop(); g_txindex.reset(); } + if (g_coin_stats_index) { + g_coin_stats_index->Stop(); + g_coin_stats_index.reset(); + } ForEachBlockFilterIndex([](BlockFilterIndex& index) { index.Stop(); }); DestroyAllBlockFilterIndexes(); @@ -287,8 +280,7 @@ void Shutdown(NodeContext& node) node.chain_clients.clear(); UnregisterAllValidationInterfaces(); GetMainSignals().UnregisterBackgroundSignalScheduler(); - globalVerifyHandle.reset(); - ECC_Stop(); + init::UnsetGlobals(); node.mempool.reset(); node.fee_estimator.reset(); node.chainman = nullptr; @@ -364,6 +356,8 @@ void SetupServerArgs(NodeContext& node) SetupHelpOptions(argsman); argsman.AddArg("-help-debug", "Print help message with debugging options and exit", ArgsManager::ALLOW_ANY, OptionsCategory::DEBUG_TEST); // server-only for now + init::AddLoggingArgs(argsman); + const auto defaultBaseParams = CreateBaseChainParams(CBaseChainParams::MAIN); const auto testnetBaseParams = CreateBaseChainParams(CBaseChainParams::TESTNET); const auto signetBaseParams = CreateBaseChainParams(CBaseChainParams::SIGNET); @@ -391,11 +385,11 @@ void SetupServerArgs(NodeContext& node) #endif argsman.AddArg("-blockreconstructionextratxn=<n>", strprintf("Extra transactions to keep in memory for compact block reconstructions (default: %u)", DEFAULT_BLOCK_RECONSTRUCTION_EXTRA_TXN), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); argsman.AddArg("-blocksonly", strprintf("Whether to reject transactions from network peers. Automatic broadcast and rebroadcast of any transactions from inbound peers is disabled, unless the peer has the 'forcerelay' permission. RPC transactions are not affected. (default: %u)", DEFAULT_BLOCKSONLY), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); + argsman.AddArg("-coinstatsindex", strprintf("Maintain coinstats index used by the gettxoutsetinfo RPC (default: %u)", DEFAULT_COINSTATSINDEX), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); argsman.AddArg("-conf=<file>", strprintf("Specify path to read-only configuration file. Relative paths will be prefixed by datadir location. (default: %s)", BITCOIN_CONF_FILENAME), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); argsman.AddArg("-datadir=<dir>", "Specify data directory", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); argsman.AddArg("-dbbatchsize", strprintf("Maximum database write batch size in bytes (default: %u)", nDefaultDbBatchSize), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::OPTIONS); argsman.AddArg("-dbcache=<n>", strprintf("Maximum database cache size <n> MiB (%d to %d, default: %d). In addition, unused mempool memory is shared for this cache (see -maxmempool).", nMinDbCache, nMaxDbCache, nDefaultDbCache), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); - argsman.AddArg("-debuglogfile=<file>", strprintf("Specify location of debug log file. Relative paths will be prefixed by a net-specific datadir location. (-nodebuglogfile to disable; default: %s)", DEFAULT_DEBUGLOGFILE), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); argsman.AddArg("-feefilter", strprintf("Tell other nodes to filter invs to us by our mempool min fee (default: %u)", DEFAULT_FEEFILTER), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::OPTIONS); argsman.AddArg("-includeconf=<file>", "Specify additional configuration file, relative to the -datadir path (only useable from configuration file, not command line)", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); argsman.AddArg("-loadblock=<file>", "Imports blocks from external file on startup", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); @@ -407,7 +401,7 @@ void SetupServerArgs(NodeContext& node) -GetNumCores(), MAX_SCRIPTCHECK_THREADS, DEFAULT_SCRIPTCHECK_THREADS), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); argsman.AddArg("-persistmempool", strprintf("Whether to save the mempool on shutdown and load on restart (default: %u)", DEFAULT_PERSIST_MEMPOOL), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); argsman.AddArg("-pid=<file>", strprintf("Specify pid file. Relative paths will be prefixed by a net-specific datadir location. (default: %s)", BITCOIN_PID_FILENAME), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); - argsman.AddArg("-prune=<n>", strprintf("Reduce storage requirements by enabling pruning (deleting) of old blocks. This allows the pruneblockchain RPC to be called to delete specific blocks, and enables automatic pruning of old blocks if a target size in MiB is provided. This mode is incompatible with -txindex and -rescan. " + argsman.AddArg("-prune=<n>", strprintf("Reduce storage requirements by enabling pruning (deleting) of old blocks. This allows the pruneblockchain RPC to be called to delete specific blocks, and enables automatic pruning of old blocks if a target size in MiB is provided. This mode is incompatible with -txindex, -coinstatsindex and -rescan. " "Warning: Reverting this setting requires re-downloading the entire blockchain. " "(default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >=%u = automatically prune block files to stay under the specified target size in MiB)", MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); argsman.AddArg("-reindex", "Rebuild chain state and block index from the blk*.dat files on disk", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); @@ -427,7 +421,7 @@ void SetupServerArgs(NodeContext& node) " If <type> is not supplied or if <type> = 1, indexes for all known types are enabled.", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); - argsman.AddArg("-addnode=<ip>", "Add a node to connect to and attempt to keep the connection open (see the `addnode` RPC command help for more info). This option can be specified multiple times to add multiple nodes.", ArgsManager::ALLOW_ANY | ArgsManager::NETWORK_ONLY, OptionsCategory::CONNECTION); + argsman.AddArg("-addnode=<ip>", strprintf("Add a node to connect to and attempt to keep the connection open (see the addnode RPC help for more info). This option can be specified multiple times to add multiple nodes; connections are limited to %u at a time and are counted separately from the -maxconnections limit.", MAX_ADDNODE_CONNECTIONS), ArgsManager::ALLOW_ANY | ArgsManager::NETWORK_ONLY, OptionsCategory::CONNECTION); argsman.AddArg("-asmap=<file>", strprintf("Specify asn mapping used for bucketing of the peers (default: %s). Relative paths will be prefixed by the net-specific datadir location.", DEFAULT_ASMAP_FILENAME), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION); argsman.AddArg("-bantime=<n>", strprintf("Default duration (in seconds) of manually configured bans (default: %u)", DEFAULT_MISBEHAVING_BANTIME), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION); argsman.AddArg("-bind=<addr>[:<port>][=onion]", strprintf("Bind to given address and always listen on it (default: 0.0.0.0). Use [host]:port notation for IPv6. Append =onion to tag any incoming connections to that address and port as incoming Tor connections (default: 127.0.0.1:%u=onion, testnet: 127.0.0.1:%u=onion, signet: 127.0.0.1:%u=onion, regtest: 127.0.0.1:%u=onion)", defaultBaseParams->OnionServiceTargetPort(), testnetBaseParams->OnionServiceTargetPort(), signetBaseParams->OnionServiceTargetPort(), regtestBaseParams->OnionServiceTargetPort()), ArgsManager::ALLOW_ANY | ArgsManager::NETWORK_ONLY, OptionsCategory::CONNECTION); @@ -440,7 +434,7 @@ void SetupServerArgs(NodeContext& node) argsman.AddArg("-forcednsseed", strprintf("Always query for peer addresses via DNS lookup (default: %u)", DEFAULT_FORCEDNSSEED), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION); argsman.AddArg("-listen", "Accept connections from outside (default: 1 if no -proxy or -connect)", ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION); argsman.AddArg("-listenonion", strprintf("Automatically create Tor onion service (default: %d)", DEFAULT_LISTEN_ONION), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION); - argsman.AddArg("-maxconnections=<n>", strprintf("Maintain at most <n> connections to peers (default: %u)", DEFAULT_MAX_PEER_CONNECTIONS), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION); + argsman.AddArg("-maxconnections=<n>", strprintf("Maintain at most <n> connections to peers (default: %u). This limit does not apply to connections manually added via -addnode or the addnode RPC, which have a separate limit of %u.", DEFAULT_MAX_PEER_CONNECTIONS, MAX_ADDNODE_CONNECTIONS), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION); argsman.AddArg("-maxreceivebuffer=<n>", strprintf("Maximum per-connection receive buffer, <n>*1000 bytes (default: %u)", DEFAULT_MAXRECEIVEBUFFER), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION); argsman.AddArg("-maxsendbuffer=<n>", strprintf("Maximum per-connection send buffer, <n>*1000 bytes (default: %u)", DEFAULT_MAXSENDBUFFER), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION); argsman.AddArg("-maxtimeadjustment", strprintf("Maximum allowed median peer time offset adjustment. Local perspective of time may be influenced by peers forward or backward by this amount. (default: %u seconds)", DEFAULT_MAX_TIME_ADJUSTMENT), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION); @@ -523,43 +517,28 @@ void SetupServerArgs(NodeContext& node) argsman.AddArg("-limitdescendantsize=<n>", strprintf("Do not accept transactions if any ancestor would have more than <n> kilobytes of in-mempool descendants (default: %u).", DEFAULT_DESCENDANT_SIZE_LIMIT), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST); argsman.AddArg("-addrmantest", "Allows to test address relay on localhost", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST); argsman.AddArg("-capturemessages", "Capture all P2P messages to disk", ArgsManager::ALLOW_BOOL | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST); - argsman.AddArg("-debug=<category>", "Output debugging information (default: -nodebug, supplying <category> is optional). " - "If <category> is not supplied or if <category> = 1, output all debugging information. <category> can be: " + LogInstance().LogCategoriesString() + ". This option can be specified multiple times to output multiple categories.", - ArgsManager::ALLOW_ANY, OptionsCategory::DEBUG_TEST); - argsman.AddArg("-debugexclude=<category>", strprintf("Exclude debugging information for a category. Can be used in conjunction with -debug=1 to output debug logs for all categories except the specified category. This option can be specified multiple times to exclude multiple categories."), ArgsManager::ALLOW_ANY, OptionsCategory::DEBUG_TEST); - argsman.AddArg("-logips", strprintf("Include IP addresses in debug output (default: %u)", DEFAULT_LOGIPS), ArgsManager::ALLOW_ANY, OptionsCategory::DEBUG_TEST); - argsman.AddArg("-logtimestamps", strprintf("Prepend debug output with timestamp (default: %u)", DEFAULT_LOGTIMESTAMPS), ArgsManager::ALLOW_ANY, OptionsCategory::DEBUG_TEST); -#ifdef HAVE_THREAD_LOCAL - argsman.AddArg("-logthreadnames", strprintf("Prepend debug output with name of the originating thread (only available on platforms supporting thread_local) (default: %u)", DEFAULT_LOGTHREADNAMES), ArgsManager::ALLOW_ANY, OptionsCategory::DEBUG_TEST); -#else - hidden_args.emplace_back("-logthreadnames"); -#endif - argsman.AddArg("-logsourcelocations", strprintf("Prepend debug output with name of the originating source location (source file, line number and function name) (default: %u)", DEFAULT_LOGSOURCELOCATIONS), ArgsManager::ALLOW_ANY, OptionsCategory::DEBUG_TEST); - argsman.AddArg("-logtimemicros", strprintf("Add microsecond precision to debug timestamps (default: %u)", DEFAULT_LOGTIMEMICROS), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST); argsman.AddArg("-mocktime=<n>", "Replace actual time with " + UNIX_EPOCH_TIME + " (default: 0)", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST); argsman.AddArg("-maxsigcachesize=<n>", strprintf("Limit sum of signature cache and script execution cache sizes to <n> MiB (default: %u)", DEFAULT_MAX_SIG_CACHE_SIZE), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST); argsman.AddArg("-maxtipage=<n>", strprintf("Maximum tip age in seconds to consider node in initial block download (default: %u)", DEFAULT_MAX_TIP_AGE), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST); - argsman.AddArg("-printpriority", strprintf("Log transaction fee per kB when mining blocks (default: %u)", DEFAULT_PRINTPRIORITY), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST); - argsman.AddArg("-printtoconsole", "Send trace/debug info to console (default: 1 when no -daemon. To disable logging to file, set -nodebuglogfile)", ArgsManager::ALLOW_ANY, OptionsCategory::DEBUG_TEST); - argsman.AddArg("-shrinkdebugfile", "Shrink debug.log file on client startup (default: 1 when no -debug)", ArgsManager::ALLOW_ANY, OptionsCategory::DEBUG_TEST); + argsman.AddArg("-printpriority", strprintf("Log transaction fee rate in " + CURRENCY_UNIT + "/kvB when mining blocks (default: %u)", DEFAULT_PRINTPRIORITY), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST); argsman.AddArg("-uacomment=<cmt>", "Append comment to the user agent string", ArgsManager::ALLOW_ANY, OptionsCategory::DEBUG_TEST); SetupChainParamsBaseOptions(argsman); argsman.AddArg("-acceptnonstdtxn", strprintf("Relay and mine \"non-standard\" transactions (%sdefault: %u)", "testnet/regtest only; ", !testnetChainParams->RequireStandard()), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::NODE_RELAY); - argsman.AddArg("-incrementalrelayfee=<amt>", strprintf("Fee rate (in %s/kB) used to define cost of relay, used for mempool limiting and BIP 125 replacement. (default: %s)", CURRENCY_UNIT, FormatMoney(DEFAULT_INCREMENTAL_RELAY_FEE)), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::NODE_RELAY); - argsman.AddArg("-dustrelayfee=<amt>", strprintf("Fee rate (in %s/kB) used to define dust, the value of an output such that it will cost more than its value in fees at this fee rate to spend it. (default: %s)", CURRENCY_UNIT, FormatMoney(DUST_RELAY_TX_FEE)), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::NODE_RELAY); + argsman.AddArg("-incrementalrelayfee=<amt>", strprintf("Fee rate (in %s/kvB) used to define cost of relay, used for mempool limiting and BIP 125 replacement. (default: %s)", CURRENCY_UNIT, FormatMoney(DEFAULT_INCREMENTAL_RELAY_FEE)), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::NODE_RELAY); + argsman.AddArg("-dustrelayfee=<amt>", strprintf("Fee rate (in %s/kvB) used to define dust, the value of an output such that it will cost more than its value in fees at this fee rate to spend it. (default: %s)", CURRENCY_UNIT, FormatMoney(DUST_RELAY_TX_FEE)), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::NODE_RELAY); argsman.AddArg("-bytespersigop", strprintf("Equivalent bytes per sigop in transactions for relay and mining (default: %u)", DEFAULT_BYTES_PER_SIGOP), ArgsManager::ALLOW_ANY, OptionsCategory::NODE_RELAY); argsman.AddArg("-datacarrier", strprintf("Relay and mine data carrier transactions (default: %u)", DEFAULT_ACCEPT_DATACARRIER), ArgsManager::ALLOW_ANY, OptionsCategory::NODE_RELAY); argsman.AddArg("-datacarriersize", strprintf("Maximum size of data in data carrier transactions we relay and mine (default: %u)", MAX_OP_RETURN_RELAY), ArgsManager::ALLOW_ANY, OptionsCategory::NODE_RELAY); - argsman.AddArg("-minrelaytxfee=<amt>", strprintf("Fees (in %s/kB) smaller than this are considered zero fee for relaying, mining and transaction creation (default: %s)", + argsman.AddArg("-minrelaytxfee=<amt>", strprintf("Fees (in %s/kvB) smaller than this are considered zero fee for relaying, mining and transaction creation (default: %s)", CURRENCY_UNIT, FormatMoney(DEFAULT_MIN_RELAY_TX_FEE)), ArgsManager::ALLOW_ANY, OptionsCategory::NODE_RELAY); argsman.AddArg("-whitelistforcerelay", strprintf("Add 'forcerelay' permission to whitelisted inbound peers with default permissions. This will relay transactions even if the transactions were already in the mempool. (default: %d)", DEFAULT_WHITELISTFORCERELAY), ArgsManager::ALLOW_ANY, OptionsCategory::NODE_RELAY); argsman.AddArg("-whitelistrelay", strprintf("Add 'relay' permission to whitelisted inbound peers with default permissions. This will accept relayed transactions even when not relaying transactions (default: %d)", DEFAULT_WHITELISTRELAY), ArgsManager::ALLOW_ANY, OptionsCategory::NODE_RELAY); argsman.AddArg("-blockmaxweight=<n>", strprintf("Set maximum BIP141 block weight (default: %d)", DEFAULT_BLOCK_MAX_WEIGHT), ArgsManager::ALLOW_ANY, OptionsCategory::BLOCK_CREATION); - argsman.AddArg("-blockmintxfee=<amt>", strprintf("Set lowest fee rate (in %s/kB) for transactions to be included in block creation. (default: %s)", CURRENCY_UNIT, FormatMoney(DEFAULT_BLOCK_MIN_TX_FEE)), ArgsManager::ALLOW_ANY, OptionsCategory::BLOCK_CREATION); + argsman.AddArg("-blockmintxfee=<amt>", strprintf("Set lowest fee rate (in %s/kvB) for transactions to be included in block creation. (default: %s)", CURRENCY_UNIT, FormatMoney(DEFAULT_BLOCK_MIN_TX_FEE)), ArgsManager::ALLOW_ANY, OptionsCategory::BLOCK_CREATION); argsman.AddArg("-blockversion=<n>", "Override block version to test forking scenarios", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::BLOCK_CREATION); argsman.AddArg("-rest", strprintf("Accept public REST requests (default: %u)", DEFAULT_REST_ENABLE), ArgsManager::ALLOW_ANY, OptionsCategory::RPC); @@ -624,47 +603,6 @@ static void BlockNotifyGenesisWait(const CBlockIndex* pBlockIndex) } } -// If we're using -prune with -reindex, then delete block files that will be ignored by the -// reindex. Since reindexing works by starting at block file 0 and looping until a blockfile -// is missing, do the same here to delete any later block files after a gap. Also delete all -// rev files since they'll be rewritten by the reindex anyway. This ensures that vinfoBlockFile -// is in sync with what's actually on disk by the time we start downloading, so that pruning -// works correctly. -static void CleanupBlockRevFiles() -{ - std::map<std::string, fs::path> mapBlockFiles; - - // Glob all blk?????.dat and rev?????.dat files from the blocks directory. - // Remove the rev files immediately and insert the blk file paths into an - // ordered map keyed by block file index. - LogPrintf("Removing unusable blk?????.dat and rev?????.dat files for -reindex with -prune\n"); - fs::path blocksdir = GetBlocksDir(); - for (fs::directory_iterator it(blocksdir); it != fs::directory_iterator(); it++) { - if (fs::is_regular_file(*it) && - it->path().filename().string().length() == 12 && - it->path().filename().string().substr(8,4) == ".dat") - { - if (it->path().filename().string().substr(0,3) == "blk") - mapBlockFiles[it->path().filename().string().substr(3,5)] = it->path(); - else if (it->path().filename().string().substr(0,3) == "rev") - remove(it->path()); - } - } - - // Remove all block files that aren't part of a contiguous set starting at - // zero by walking the ordered map (keys are block file indices) by - // keeping a separate counter. Once we hit a gap (or if 0 doesn't exist) - // start removing block files. - int nContigCounter = 0; - for (const std::pair<const std::string, fs::path>& item : mapBlockFiles) { - if (atoi(item.first) == nContigCounter) { - nContigCounter++; - continue; - } - remove(item.second); - } -} - #if HAVE_SYSTEM static void StartupNotify(const ArgsManager& args) { @@ -676,30 +614,6 @@ static void StartupNotify(const ArgsManager& args) } #endif -/** Sanity checks - * Ensure that Bitcoin is running in a usable environment with all - * necessary library support. - */ -static bool InitSanityCheck() -{ - if (!ECC_InitSanityCheck()) { - return InitError(Untranslated("Elliptic curve cryptography sanity check failure. Aborting.")); - } - - if (!glibcxx_sanity_test()) - return false; - - if (!Random_SanityCheck()) { - return InitError(Untranslated("OS cryptographic RNG sanity check failure. Aborting.")); - } - - if (!ChronoSanityCheck()) { - return InitError(Untranslated("Clock epoch mismatch. Aborting.")); - } - - return true; -} - static bool AppInitServers(NodeContext& node) { const ArgsManager& args = *Assert(node.args); @@ -797,25 +711,8 @@ void InitParameterInteraction(ArgsManager& args) */ void InitLogging(const ArgsManager& args) { - LogInstance().m_print_to_file = !args.IsArgNegated("-debuglogfile"); - LogInstance().m_file_path = AbsPathForConfigVal(args.GetArg("-debuglogfile", DEFAULT_DEBUGLOGFILE)); - LogInstance().m_print_to_console = args.GetBoolArg("-printtoconsole", !args.GetBoolArg("-daemon", false)); - LogInstance().m_log_timestamps = args.GetBoolArg("-logtimestamps", DEFAULT_LOGTIMESTAMPS); - LogInstance().m_log_time_micros = args.GetBoolArg("-logtimemicros", DEFAULT_LOGTIMEMICROS); -#ifdef HAVE_THREAD_LOCAL - LogInstance().m_log_threadnames = args.GetBoolArg("-logthreadnames", DEFAULT_LOGTHREADNAMES); -#endif - LogInstance().m_log_sourcelocations = args.GetBoolArg("-logsourcelocations", DEFAULT_LOGSOURCELOCATIONS); - - fLogIPs = args.GetBoolArg("-logips", DEFAULT_LOGIPS); - - std::string version_string = FormatFullVersion(); -#ifdef DEBUG - version_string += " (debug build)"; -#else - version_string += " (release build)"; -#endif - LogPrintf(PACKAGE_NAME " version %s\n", version_string); + init::SetLoggingOptions(args); + init::LogPackageVersion(); } namespace { // Variables internal to initialization process only @@ -920,7 +817,7 @@ bool AppInitParameterInteraction(const ArgsManager& args) InitWarning(warnings); } - if (!fs::is_directory(GetBlocksDir())) { + if (!fs::is_directory(gArgs.GetBlocksDirPath())) { return InitError(strprintf(_("Specified blocks directory \"%s\" does not exist."), args.GetArg("-blocksdir", ""))); } @@ -948,10 +845,12 @@ bool AppInitParameterInteraction(const ArgsManager& args) nLocalServices = ServiceFlags(nLocalServices | NODE_COMPACT_FILTERS); } - // if using block pruning, then disallow txindex + // if using block pruning, then disallow txindex and coinstatsindex if (args.GetArg("-prune", 0)) { if (args.GetBoolArg("-txindex", DEFAULT_TXINDEX)) return InitError(_("Prune mode is incompatible with -txindex.")); + if (args.GetBoolArg("-coinstatsindex", DEFAULT_COINSTATSINDEX)) + return InitError(_("Prune mode is incompatible with -coinstatsindex.")); } // -bind and -whitebind can't be set when not listening @@ -983,26 +882,7 @@ bool AppInitParameterInteraction(const ArgsManager& args) InitWarning(strprintf(_("Reducing -maxconnections from %d to %d, because of system limitations."), nUserMaxConnections, nMaxConnections)); // ********************************************************* Step 3: parameter-to-internal-flags - if (args.IsArgSet("-debug")) { - // Special-case: if -debug=0/-nodebug is set, turn off debugging messages - const std::vector<std::string> categories = args.GetArgs("-debug"); - - if (std::none_of(categories.begin(), categories.end(), - [](std::string cat){return cat == "0" || cat == "none";})) { - for (const auto& cat : categories) { - if (!LogInstance().EnableCategory(cat)) { - InitWarning(strprintf(_("Unsupported logging category %s=%s."), "-debug", cat)); - } - } - } - } - - // Now remove the logging categories which were explicitly excluded - for (const std::string& cat : args.GetArgs("-debugexclude")) { - if (!LogInstance().DisableCategory(cat)) { - InitWarning(strprintf(_("Unsupported logging category %s=%s."), "-debugexclude", cat)); - } - } + init::SetLoggingCategories(args); fCheckBlockIndex = args.GetBoolArg("-checkblockindex", chainparams.DefaultConsistencyChecks()); fCheckpointsEnabled = args.GetBoolArg("-checkpoints", DEFAULT_CHECKPOINTS_ENABLED); @@ -1149,16 +1029,11 @@ bool AppInitSanityChecks() { // ********************************************************* Step 4: sanity checks - // Initialize elliptic curve code - std::string sha256_algo = SHA256AutoDetect(); - LogPrintf("Using the '%s' SHA256 implementation\n", sha256_algo); - RandomInit(); - ECC_Start(); - globalVerifyHandle.reset(new ECCVerifyHandle()); + init::SetGlobals(); - // Sanity check - if (!InitSanityCheck()) + if (!init::SanityChecks()) { return InitError(strprintf(_("Initialization sanity check failed. %s is shutting down."), PACKAGE_NAME)); + } // Probe the data directory lock to give an early error message, if possible // We cannot hold the data directory lock here, as the forking for daemon() hasn't yet happened, @@ -1198,38 +1073,11 @@ bool AppInitMain(NodeContext& node, interfaces::BlockAndHeaderTipInfo* tip_info) // Detailed error printed inside CreatePidFile(). return false; } - if (LogInstance().m_print_to_file) { - if (args.GetBoolArg("-shrinkdebugfile", LogInstance().DefaultShrinkDebugFile())) { - // Do this first since it both loads a bunch of debug.log into memory, - // and because this needs to happen before any other debug.log printing - LogInstance().ShrinkDebugFile(); - } - } - if (!LogInstance().StartLogging()) { - return InitError(strprintf(Untranslated("Could not open debug log file %s"), - LogInstance().m_file_path.string())); - } - - if (!LogInstance().m_log_timestamps) - LogPrintf("Startup time: %s\n", FormatISO8601DateTime(GetTime())); - LogPrintf("Default data directory %s\n", GetDefaultDataDir().string()); - LogPrintf("Using data directory %s\n", GetDataDir().string()); - - // Only log conf file usage message if conf file actually exists. - fs::path config_file_path = GetConfigFile(args.GetArg("-conf", BITCOIN_CONF_FILENAME)); - if (fs::exists(config_file_path)) { - LogPrintf("Config file: %s\n", config_file_path.string()); - } else if (args.IsArgSet("-conf")) { - // Warn if no conf file exists at path provided by user - InitWarning(strprintf(_("The specified config file %s does not exist"), config_file_path.string())); - } else { - // Not categorizing as "Warning" because it's the default behavior - LogPrintf("Config file: %s (not found, skipping)\n", config_file_path.string()); + if (!init::StartLogging(args)) { + // Detailed error printed inside StartLogging(). + return false; } - // Log the config arguments to debug.log - args.LogArgs(); - LogPrintf("Using at most %i automatic connections (%i file descriptors available)\n", nMaxConnections, nFD); // Warn about relative -datadir path. @@ -1493,13 +1341,13 @@ bool AppInitMain(NodeContext& node, interfaces::BlockAndHeaderTipInfo* tip_info) bool fLoaded = false; while (!fLoaded && !ShutdownRequested()) { - bool fReset = fReindex; + const bool fReset = fReindex; auto is_coinsview_empty = [&](CChainState* chainstate) EXCLUSIVE_LOCKS_REQUIRED(::cs_main) { return fReset || fReindexChainState || chainstate->CoinsTip().GetBestBlock().IsNull(); }; bilingual_str strLoadError; - uiInterface.InitMessage(_("Loading block index...").translated); + uiInterface.InitMessage(_("Loading block index…").translated); do { const int64_t load_block_index_start_time = GetTimeMillis(); @@ -1614,29 +1462,17 @@ bool AppInitMain(NodeContext& node, interfaces::BlockAndHeaderTipInfo* tip_info) break; } - bool failed_rewind{false}; - // Can't hold cs_main while calling RewindBlockIndex, so retrieve the relevant - // chainstates beforehand. - for (CChainState* chainstate : WITH_LOCK(::cs_main, return chainman.GetAll())) { - if (!fReset) { - // Note that RewindBlockIndex MUST run even if we're about to -reindex-chainstate. - // It both disconnects blocks based on the chainstate, and drops block data in - // BlockIndex() based on lack of available witness data. - uiInterface.InitMessage(_("Rewinding blocks...").translated); - if (!chainstate->RewindBlockIndex(chainparams)) { - strLoadError = _( - "Unable to rewind the database to a pre-fork state. " - "You will need to redownload the blockchain"); - failed_rewind = true; - break; // out of the per-chainstate loop - } + if (!fReset) { + LOCK(cs_main); + auto chainstates{chainman.GetAll()}; + if (std::any_of(chainstates.begin(), chainstates.end(), + [&chainparams](const CChainState* cs) EXCLUSIVE_LOCKS_REQUIRED(cs_main) { return cs->NeedsRedownload(chainparams); })) { + strLoadError = strprintf(_("Witness data for blocks after height %d requires validation. Please restart with -reindex."), + chainparams.GetConsensus().SegwitHeight); + break; } } - if (failed_rewind) { - break; // out of the chainstate activation do-while - } - bool failed_verification = false; try { @@ -1644,7 +1480,7 @@ bool AppInitMain(NodeContext& node, interfaces::BlockAndHeaderTipInfo* tip_info) for (CChainState* chainstate : chainman.GetAll()) { if (!is_coinsview_empty(chainstate)) { - uiInterface.InitMessage(_("Verifying blocks...").translated); + uiInterface.InitMessage(_("Verifying blocks…").translated); if (fHavePruned && args.GetArg("-checkblocks", DEFAULT_CHECKBLOCKS) > MIN_BLOCKS_TO_KEEP) { LogPrintf("Prune: pruned datadir may not have more than %d blocks; only checking available blocks\n", MIN_BLOCKS_TO_KEEP); @@ -1660,11 +1496,8 @@ bool AppInitMain(NodeContext& node, interfaces::BlockAndHeaderTipInfo* tip_info) break; } - // Only verify the DB of the active chainstate. This is fixed in later - // work when we allow VerifyDB to be parameterized by chainstate. - if (&::ChainstateActive() == chainstate && - !CVerifyDB().VerifyDB( - chainparams, *chainstate, &chainstate->CoinsDB(), + if (!CVerifyDB().VerifyDB( + *chainstate, chainparams, chainstate->CoinsDB(), args.GetArg("-checklevel", DEFAULT_CHECKLEVEL), args.GetArg("-checkblocks", DEFAULT_CHECKBLOCKS))) { strLoadError = _("Corrupted block database detected"); @@ -1725,6 +1558,11 @@ bool AppInitMain(NodeContext& node, interfaces::BlockAndHeaderTipInfo* tip_info) GetBlockFilterIndex(filter_type)->Start(); } + if (args.GetBoolArg("-coinstatsindex", DEFAULT_COINSTATSINDEX)) { + g_coin_stats_index = std::make_unique<CoinStatsIndex>(/* cache size */ 0, false, fReindex); + g_coin_stats_index->Start(); + } + // ********************************************************* Step 9: load wallet for (const auto& client : node.chain_clients) { if (!client->load()) { @@ -1742,7 +1580,7 @@ bool AppInitMain(NodeContext& node, interfaces::BlockAndHeaderTipInfo* tip_info) if (!fReindex) { LOCK(cs_main); for (CChainState* chainstate : chainman.GetAll()) { - uiInterface.InitMessage(_("Pruning blockstore...").translated); + uiInterface.InitMessage(_("Pruning blockstore…").translated); chainstate->PruneAndFlush(); } } @@ -1760,8 +1598,8 @@ bool AppInitMain(NodeContext& node, interfaces::BlockAndHeaderTipInfo* tip_info) InitError(strprintf(_("Error: Disk space is low for %s"), GetDataDir())); return false; } - if (!CheckDiskSpace(GetBlocksDir())) { - InitError(strprintf(_("Error: Disk space is low for %s"), GetBlocksDir())); + if (!CheckDiskSpace(gArgs.GetBlocksDirPath())) { + InitError(strprintf(_("Error: Disk space is low for %s"), gArgs.GetBlocksDirPath())); return false; } |