diff options
Diffstat (limited to 'src/init.cpp')
| -rw-r--r-- | src/init.cpp | 65 |
1 files changed, 56 insertions, 9 deletions
diff --git a/src/init.cpp b/src/init.cpp index 7a89fb8879..5be011f944 100644 --- a/src/init.cpp +++ b/src/init.cpp @@ -329,8 +329,7 @@ std::string HelpMessage(HelpMessageMode mode) strUsage += HelpMessageOpt("-blocknotify=<cmd>", _("Execute command when the best block changes (%s in cmd is replaced by block hash)")); if (showDebug) strUsage += HelpMessageOpt("-blocksonly", strprintf(_("Whether to operate in a blocks only mode (default: %u)"), DEFAULT_BLOCKSONLY)); - strUsage += HelpMessageOpt("-checkblocks=<n>", strprintf(_("How many blocks to check at startup (default: %u, 0 = all)"), DEFAULT_CHECKBLOCKS)); - strUsage += HelpMessageOpt("-checklevel=<n>", strprintf(_("How thorough the block verification of -checkblocks is (0-4, default: %u)"), DEFAULT_CHECKLEVEL)); + strUsage +=HelpMessageOpt("-assumevalid=<hex>", strprintf(_("If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: %s, testnet: %s)"), Params(CBaseChainParams::MAIN).GetConsensus().defaultAssumeValid.GetHex(), Params(CBaseChainParams::TESTNET).GetConsensus().defaultAssumeValid.GetHex())); strUsage += HelpMessageOpt("-conf=<file>", strprintf(_("Specify configuration file (default: %s)"), BITCOIN_CONF_FILENAME)); if (mode == HMM_BITCOIND) { @@ -352,9 +351,9 @@ std::string HelpMessage(HelpMessageMode mode) #ifndef WIN32 strUsage += HelpMessageOpt("-pid=<file>", strprintf(_("Specify pid file (default: %s)"), BITCOIN_PID_FILENAME)); #endif - strUsage += HelpMessageOpt("-prune=<n>", strprintf(_("Reduce storage requirements by pruning (deleting) old blocks. This mode is incompatible with -txindex and -rescan. " + strUsage += HelpMessageOpt("-prune=<n>", strprintf(_("Reduce storage requirements by enabling pruning (deleting) of old blocks. This allows the pruneblockchain RPC to be called to delete specific blocks, and enables automatic pruning of old blocks if a target size in MiB is provided. This mode is incompatible with -txindex and -rescan. " "Warning: Reverting this setting requires re-downloading the entire blockchain. " - "(default: 0 = disable pruning blocks, >%u = target size in MiB to use for block files)"), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024)); + "(default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >%u = automatically prune block files to stay under the specified target size in MiB)"), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024)); strUsage += HelpMessageOpt("-reindex-chainstate", _("Rebuild chain state from the currently indexed blocks")); strUsage += HelpMessageOpt("-reindex", _("Rebuild chain state and block index from the blk*.dat files on disk")); #ifndef WIN32 @@ -421,6 +420,8 @@ std::string HelpMessage(HelpMessageMode mode) strUsage += HelpMessageOpt("-uacomment=<cmt>", _("Append comment to the user agent string")); if (showDebug) { + strUsage += HelpMessageOpt("-checkblocks=<n>", strprintf(_("How many blocks to check at startup (default: %u, 0 = all)"), DEFAULT_CHECKBLOCKS)); + strUsage += HelpMessageOpt("-checklevel=<n>", strprintf(_("How thorough the block verification of -checkblocks is (0-4, default: %u)"), DEFAULT_CHECKLEVEL)); strUsage += HelpMessageOpt("-checkblockindex", strprintf("Do a full consistency check for mapBlockIndex, setBlockIndexCandidates, chainActive and mapBlocksUnlinked occasionally. Also sets -checkmempool (default: %u)", Params(CBaseChainParams::MAIN).DefaultConsistencyChecks())); strUsage += HelpMessageOpt("-checkmempool=<n>", strprintf("Run checks every <n> transactions (default: %u)", Params(CBaseChainParams::MAIN).DefaultConsistencyChecks())); strUsage += HelpMessageOpt("-checkpoints", strprintf("Disable expensive verification for known chain history (default: %u)", DEFAULT_CHECKPOINTS_ENABLED)); @@ -468,8 +469,11 @@ std::string HelpMessage(HelpMessageMode mode) AppendParamsHelpMessages(strUsage, showDebug); strUsage += HelpMessageGroup(_("Node relay options:")); - if (showDebug) + if (showDebug) { strUsage += HelpMessageOpt("-acceptnonstdtxn", strprintf("Relay and mine \"non-standard\" transactions (%sdefault: %u)", "testnet/regtest only; ", !Params(CBaseChainParams::TESTNET).RequireStandard())); + strUsage += HelpMessageOpt("-incrementalrelayfee=<amt>", strprintf("Fee rate (in %s/kB) used to define cost of relay, used for mempool limiting and BIP 125 replacement. (default: %s)", CURRENCY_UNIT, FormatMoney(DEFAULT_INCREMENTAL_RELAY_FEE))); + strUsage += HelpMessageOpt("-dustrelayfee=<amt>", strprintf("Fee rate (in %s/kB) used to defined dust, the value of an output such that it will cost about 1/3 of its value in fees at this fee rate to spend it. (default: %s)", CURRENCY_UNIT, FormatMoney(DUST_RELAY_TX_FEE))); + } strUsage += HelpMessageOpt("-bytespersigop", strprintf(_("Equivalent bytes per sigop in transactions for relay and mining (default: %u)"), DEFAULT_BYTES_PER_SIGOP)); strUsage += HelpMessageOpt("-datacarrier", strprintf(_("Relay and mine data carrier transactions (default: %u)"), DEFAULT_ACCEPT_DATACARRIER)); strUsage += HelpMessageOpt("-datacarriersize", strprintf(_("Maximum size of data in data carrier transactions we relay and mine (default: %u)"), MAX_OP_RETURN_RELAY)); @@ -479,6 +483,7 @@ std::string HelpMessage(HelpMessageMode mode) strUsage += HelpMessageOpt("-blockmaxweight=<n>", strprintf(_("Set maximum BIP141 block weight (default: %d)"), DEFAULT_BLOCK_MAX_WEIGHT)); strUsage += HelpMessageOpt("-blockmaxsize=<n>", strprintf(_("Set maximum block size in bytes (default: %d)"), DEFAULT_BLOCK_MAX_SIZE)); strUsage += HelpMessageOpt("-blockprioritysize=<n>", strprintf(_("Set maximum size of high-priority/low-fee transactions in bytes (default: %d)"), DEFAULT_BLOCK_PRIORITY_SIZE)); + strUsage += HelpMessageOpt("-blockmintxfee=<amt>", strprintf(_("Set lowest fee rate (in %s/kB) for transactions to be included in block creation. (default: %s)"), CURRENCY_UNIT, FormatMoney(DEFAULT_BLOCK_MIN_TX_FEE))); if (showDebug) strUsage += HelpMessageOpt("-blockversion=<n>", "Override block version to test forking scenarios"); @@ -921,11 +926,26 @@ bool AppInitParameterInteraction() fCheckBlockIndex = GetBoolArg("-checkblockindex", chainparams.DefaultConsistencyChecks()); fCheckpointsEnabled = GetBoolArg("-checkpoints", DEFAULT_CHECKPOINTS_ENABLED); + hashAssumeValid = uint256S(GetArg("-assumevalid", chainparams.GetConsensus().defaultAssumeValid.GetHex())); + if (!hashAssumeValid.IsNull()) + LogPrintf("Assuming ancestors of block %s have valid signatures.\n", hashAssumeValid.GetHex()); + else + LogPrintf("Validating signatures for all blocks.\n"); + // mempool limits int64_t nMempoolSizeMax = GetArg("-maxmempool", DEFAULT_MAX_MEMPOOL_SIZE) * 1000000; int64_t nMempoolSizeMin = GetArg("-limitdescendantsize", DEFAULT_DESCENDANT_SIZE_LIMIT) * 1000 * 40; if (nMempoolSizeMax < 0 || nMempoolSizeMax < nMempoolSizeMin) return InitError(strprintf(_("-maxmempool must be at least %d MB"), std::ceil(nMempoolSizeMin / 1000000.0))); + // incremental relay fee sets the minimimum feerate increase necessary for BIP 125 replacement in the mempool + // and the amount the mempool min fee increases above the feerate of txs evicted due to mempool limiting. + if (IsArgSet("-incrementalrelayfee")) + { + CAmount n = 0; + if (!ParseMoney(GetArg("-incrementalrelayfee", ""), n)) + return InitError(AmountErrMsg("incrementalrelayfee", GetArg("-incrementalrelayfee", ""))); + incrementalRelayFee = CFeeRate(n); + } // -par=0 means autodetect, but nScriptCheckThreads==0 means no concurrency nScriptCheckThreads = GetArg("-par", DEFAULT_SCRIPTCHECK_THREADS); @@ -937,12 +957,16 @@ bool AppInitParameterInteraction() nScriptCheckThreads = MAX_SCRIPTCHECK_THREADS; // block pruning; get the amount of disk space (in MiB) to allot for block & undo files - int64_t nSignedPruneTarget = GetArg("-prune", 0) * 1024 * 1024; - if (nSignedPruneTarget < 0) { + int64_t nPruneArg = GetArg("-prune", 0); + if (nPruneArg < 0) { return InitError(_("Prune cannot be configured with a negative value.")); } - nPruneTarget = (uint64_t) nSignedPruneTarget; - if (nPruneTarget) { + nPruneTarget = (uint64_t) nPruneArg * 1024 * 1024; + if (nPruneArg == 1) { // manual pruning: -prune=1 + LogPrintf("Block pruning enabled. Use RPC call pruneblockchain(height) to manually prune block and undo files.\n"); + nPruneTarget = std::numeric_limits<uint64_t>::max(); + fPruneMode = true; + } else if (nPruneTarget) { if (nPruneTarget < MIN_DISK_SPACE_FOR_BLOCK_FILES) { return InitError(strprintf(_("Prune configured below the minimum of %d MiB. Please use a higher number."), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024)); } @@ -972,6 +996,29 @@ bool AppInitParameterInteraction() return InitError(AmountErrMsg("minrelaytxfee", GetArg("-minrelaytxfee", ""))); // High fee check is done afterward in CWallet::ParameterInteraction() ::minRelayTxFee = CFeeRate(n); + } else if (incrementalRelayFee > ::minRelayTxFee) { + // Allow only setting incrementalRelayFee to control both + ::minRelayTxFee = incrementalRelayFee; + LogPrintf("Increasing minrelaytxfee to %s to match incrementalrelayfee\n",::minRelayTxFee.ToString()); + } + + // Sanity check argument for min fee for including tx in block + // TODO: Harmonize which arguments need sanity checking and where that happens + if (IsArgSet("-blockmintxfee")) + { + CAmount n = 0; + if (!ParseMoney(GetArg("-blockmintxfee", ""), n)) + return InitError(AmountErrMsg("blockmintxfee", GetArg("-blockmintxfee", ""))); + } + + // Feerate used to define dust. Shouldn't be changed lightly as old + // implementations may inadvertently create non-standard transactions + if (IsArgSet("-dustrelayfee")) + { + CAmount n = 0; + if (!ParseMoney(GetArg("-dustrelayfee", ""), n) || 0 == n) + return InitError(AmountErrMsg("dustrelayfee", GetArg("-dustrelayfee", ""))); + dustRelayFee = CFeeRate(n); } fRequireStandard = !GetBoolArg("-acceptnonstdtxn", !chainparams.RequireStandard()); |