diff options
Diffstat (limited to 'src/init.cpp')
| -rw-r--r-- | src/init.cpp | 107 |
1 files changed, 95 insertions, 12 deletions
diff --git a/src/init.cpp b/src/init.cpp index 4d9c233c8c..b648a237bf 100644 --- a/src/init.cpp +++ b/src/init.cpp @@ -123,7 +123,7 @@ public: LogPrintf("Error reading from database: %s\n", e.what()); // Starting the shutdown sequence and returning false to the caller would be // interpreted as 'entry not found' (as opposed to unable to read data), and - // could lead to invalid interpration. Just exit immediately, as we can't + // could lead to invalid interpretation. Just exit immediately, as we can't // continue anyway, and all writes should be atomic. abort(); } @@ -275,7 +275,12 @@ std::string HelpMessage(HelpMessageMode mode) #ifndef WIN32 strUsage += HelpMessageOpt("-pid=<file>", strprintf(_("Specify pid file (default: %s)"), "bitcoind.pid")); #endif - strUsage += HelpMessageOpt("-reindex", _("Rebuild block chain index from current blk000??.dat files") + " " + _("on startup")); + strUsage += HelpMessageOpt("-prune=<n>", _("Reduce storage requirements by pruning (deleting) old blocks. This mode disables wallet support and is incompatible with -txindex.") + " " + + _("Warning: Reverting this setting requires re-downloading the entire blockchain.") + " " + + _("(default: 0 = disable pruning blocks,") + " " + + strprintf(_(">%u = target size in MiB to use for block files)"), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024)); +strUsage += HelpMessageOpt("-reindex", _("Rebuild block chain index from current blk000??.dat files") + " " + _("on startup")); + #if !defined(WIN32) strUsage += HelpMessageOpt("-sysperms", _("Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality)")); #endif @@ -301,6 +306,7 @@ std::string HelpMessage(HelpMessageMode mode) strUsage += HelpMessageOpt("-permitbaremultisig", strprintf(_("Relay non-P2SH multisig (default: %u)"), 1)); strUsage += HelpMessageOpt("-port=<port>", strprintf(_("Listen for connections on <port> (default: %u or testnet: %u)"), 8333, 18333)); strUsage += HelpMessageOpt("-proxy=<ip:port>", _("Connect through SOCKS5 proxy")); + strUsage += HelpMessageOpt("-proxyrandomize", strprintf(_("Randomize credentials for every proxy connection. This enables Tor stream isolation (default: %u)"), 1)); strUsage += HelpMessageOpt("-seednode=<ip>", _("Connect to a node to retrieve peer addresses, and disconnect")); strUsage += HelpMessageOpt("-timeout=<n>", strprintf(_("Specify connection timeout in milliseconds (minimum: 1, default: %d)"), DEFAULT_CONNECT_TIMEOUT)); #ifdef USE_UPNP @@ -351,7 +357,7 @@ std::string HelpMessage(HelpMessageMode mode) strUsage += HelpMessageOpt("-flushwallet", strprintf(_("Run a thread to flush wallet periodically (default: %u)"), 1)); strUsage += HelpMessageOpt("-stopafterblockimport", strprintf(_("Stop running after importing blocks from disk (default: %u)"), 0)); } - string debugCategories = "addrman, alert, bench, coindb, db, lock, rand, rpc, selectcoins, mempool, net"; // Don't translate these and qt below + string debugCategories = "addrman, alert, bench, coindb, db, lock, rand, rpc, selectcoins, mempool, net, proxy, prune"; // Don't translate these and qt below if (mode == HMM_BITCOIN_QT) debugCategories += ", qt"; strUsage += HelpMessageOpt("-debug=<category>", strprintf(_("Output debugging information (default: %u, supplying <category> is optional)"), 0) + ". " + @@ -365,8 +371,8 @@ std::string HelpMessage(HelpMessageMode mode) strUsage += HelpMessageOpt("-logtimestamps", strprintf(_("Prepend debug output with timestamp (default: %u)"), 1)); if (GetBoolArg("-help-debug", false)) { - strUsage += HelpMessageOpt("-limitfreerelay=<n>", strprintf(_("Continuously rate-limit free transactions to <n>*1000 bytes per minute (default:%u)"), 15)); - strUsage += HelpMessageOpt("-relaypriority", strprintf(_("Require high priority for relaying free or low-fee transactions (default:%u)"), 1)); + strUsage += HelpMessageOpt("-limitfreerelay=<n>", strprintf(_("Continuously rate-limit free transactions to <n>*1000 bytes per minute (default: %u)"), 15)); + strUsage += HelpMessageOpt("-relaypriority", strprintf(_("Require high priority for relaying free or low-fee transactions (default: %u)"), 1)); strUsage += HelpMessageOpt("-maxsigcachesize=<n>", strprintf(_("Limit size of signature cache to <n> entries (default: %u)"), 50000)); } strUsage += HelpMessageOpt("-minrelaytxfee=<amt>", strprintf(_("Fees (in BTC/Kb) smaller than this are considered zero fee for relaying (default: %s)"), FormatMoney(::minRelayTxFee.GetFeePerK()))); @@ -457,10 +463,33 @@ struct CImportingNow } }; + +// If we're using -prune with -reindex, then delete block files that will be ignored by the +// reindex. Since reindexing works by starting at block file 0 and looping until a blockfile +// is missing, and since pruning works by deleting the oldest block file first, just check +// for block file 0, and if it doesn't exist, delete all the block files in the +// directory (since they won't be read by the reindex but will take up disk space). +void DeleteAllBlockFiles() +{ + if (boost::filesystem::exists(GetBlockPosFilename(CDiskBlockPos(0, 0), "blk"))) + return; + + LogPrintf("Removing all blk?????.dat and rev?????.dat files for -reindex with -prune\n"); + boost::filesystem::path blocksdir = GetDataDir() / "blocks"; + for (boost::filesystem::directory_iterator it(blocksdir); it != boost::filesystem::directory_iterator(); it++) { + if (is_regular_file(*it)) { + if ((it->path().filename().string().length() == 12) && + (it->path().filename().string().substr(8,4) == ".dat") && + ((it->path().filename().string().substr(0,3) == "blk") || + (it->path().filename().string().substr(0,3) == "rev"))) + boost::filesystem::remove(it->path()); + } + } +} + void ThreadImport(std::vector<boost::filesystem::path> vImportFiles) { RenameThread("bitcoin-loadblk"); - // -reindex if (fReindex) { CImportingNow imp; @@ -673,6 +702,21 @@ bool AppInit2(boost::thread_group& threadGroup) if (nFD - MIN_CORE_FILEDESCRIPTORS < nMaxConnections) nMaxConnections = nFD - MIN_CORE_FILEDESCRIPTORS; + // if using block pruning, then disable txindex + // also disable the wallet (for now, until SPV support is implemented in wallet) + if (GetArg("-prune", 0)) { + if (GetBoolArg("-txindex", false)) + return InitError(_("Prune mode is incompatible with -txindex.")); +#ifdef ENABLE_WALLET + if (!GetBoolArg("-disablewallet", false)) { + if (SoftSetBoolArg("-disablewallet", true)) + LogPrintf("%s : parameter interaction: -prune -> setting -disablewallet=1\n", __func__); + else + return InitError(_("Can't run with a wallet in prune mode.")); + } +#endif + } + // ********************************************************* Step 3: parameter-to-internal-flags fDebug = !mapMultiArgs["-debug"].empty(); @@ -709,6 +753,21 @@ bool AppInit2(boost::thread_group& threadGroup) nScriptCheckThreads = MAX_SCRIPTCHECK_THREADS; fServer = GetBoolArg("-server", false); + + // block pruning; get the amount of disk space (in MB) to allot for block & undo files + int64_t nSignedPruneTarget = GetArg("-prune", 0) * 1024 * 1024; + if (nSignedPruneTarget < 0) { + return InitError(_("Prune cannot be configured with a negative value.")); + } + nPruneTarget = (uint64_t) nSignedPruneTarget; + if (nPruneTarget) { + if (nPruneTarget < MIN_DISK_SPACE_FOR_BLOCK_FILES) { + return InitError(strprintf(_("Prune configured below the minimum of %d MB. Please use a higher number."), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024)); + } + LogPrintf("Prune configured to target %uMiB on disk for block and undo files.\n", nPruneTarget / 1024 / 1024); + fPruneMode = true; + } + #ifdef ENABLE_WALLET bool fDisableWallet = GetBoolArg("-disablewallet", false); #endif @@ -891,10 +950,10 @@ bool AppInit2(boost::thread_group& threadGroup) } } - CService addrProxy; + proxyType addrProxy; bool fProxy = false; if (mapArgs.count("-proxy")) { - addrProxy = CService(mapArgs["-proxy"], 9050); + addrProxy = proxyType(CService(mapArgs["-proxy"], 9050), GetArg("-proxyrandomize", true)); if (!addrProxy.IsValid()) return InitError(strprintf(_("Invalid -proxy address: '%s'"), mapArgs["-proxy"])); @@ -904,14 +963,14 @@ bool AppInit2(boost::thread_group& threadGroup) fProxy = true; } - // -onion can override normal proxy, -noonion disables tor entirely + // -onion can override normal proxy, -noonion disables connecting to .onion entirely if (!(mapArgs.count("-onion") && mapArgs["-onion"] == "0") && (fProxy || mapArgs.count("-onion"))) { - CService addrOnion; + proxyType addrOnion; if (!mapArgs.count("-onion")) addrOnion = addrProxy; else - addrOnion = CService(mapArgs["-onion"], 9050); + addrOnion = proxyType(CService(mapArgs["-onion"], 9050), GetArg("-proxyrandomize", true)); if (!addrOnion.IsValid()) return InitError(strprintf(_("Invalid -onion address: '%s'"), mapArgs["-onion"])); SetProxy(NET_TOR, addrOnion); @@ -1029,8 +1088,12 @@ bool AppInit2(boost::thread_group& threadGroup) pcoinscatcher = new CCoinsViewErrorCatcher(pcoinsdbview); pcoinsTip = new CCoinsViewCache(pcoinscatcher); - if (fReindex) + if (fReindex) { pblocktree->WriteReindexing(true); + //If we're reindexing in prune mode, wipe away all our block and undo data files + if (fPruneMode) + DeleteAllBlockFiles(); + } if (!LoadBlockIndex()) { strLoadError = _("Error loading block database"); @@ -1054,7 +1117,18 @@ bool AppInit2(boost::thread_group& threadGroup) break; } + // Check for changed -prune state. What we are concerned about is a user who has pruned blocks + // in the past, but is now trying to run unpruned. + if (fHavePruned && !fPruneMode) { + strLoadError = _("You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain"); + break; + } + uiInterface.InitMessage(_("Verifying blocks...")); + if (fHavePruned && GetArg("-checkblocks", 288) > MIN_BLOCKS_TO_KEEP) { + LogPrintf("Prune: pruned datadir may not have more than %d blocks; -checkblocks=%d may fail\n", + MIN_BLOCKS_TO_KEEP, GetArg("-checkblocks", 288)); + } if (!CVerifyDB().VerifyDB(pcoinsdbview, GetArg("-checklevel", 3), GetArg("-checkblocks", 288))) { strLoadError = _("Corrupted block database detected"); @@ -1105,6 +1179,15 @@ bool AppInit2(boost::thread_group& threadGroup) mempool.ReadFeeEstimates(est_filein); fFeeEstimatesInitialized = true; + // if prune mode, unset NODE_NETWORK and prune block files + if (fPruneMode) { + LogPrintf("Unsetting NODE_NETWORK on prune mode\n"); + nLocalServices &= ~NODE_NETWORK; + if (!fReindex) { + PruneAndFlush(); + } + } + // ********************************************************* Step 8: load wallet #ifdef ENABLE_WALLET if (fDisableWallet) { |