diff options
Diffstat (limited to 'src/init.cpp')
-rw-r--r-- | src/init.cpp | 84 |
1 files changed, 28 insertions, 56 deletions
diff --git a/src/init.cpp b/src/init.cpp index e0efe5c0a2..f6f522da66 100644 --- a/src/init.cpp +++ b/src/init.cpp @@ -43,10 +43,8 @@ #include <util.h> #include <utilmoneystr.h> #include <validationinterface.h> -#ifdef ENABLE_WALLET -#include <wallet/init.h> -#endif #include <warnings.h> +#include <walletinitinterface.h> #include <stdint.h> #include <stdio.h> #include <memory> @@ -74,6 +72,7 @@ static const bool DEFAULT_STOPAFTERBLOCKIMPORT = false; std::unique_ptr<CConnman> g_connman; std::unique_ptr<PeerLogicValidation> peerLogic; +std::unique_ptr<WalletInitInterface> g_wallet_init_interface; #if ENABLE_ZMQ static CZMQNotificationInterface* pzmqNotificationInterface = nullptr; @@ -116,7 +115,6 @@ static const char* FEE_ESTIMATES_FILENAME="fee_estimates.dat"; // std::atomic<bool> fRequestShutdown(false); -std::atomic<bool> fDumpMempoolLater(false); void StartShutdown() { @@ -189,9 +187,7 @@ void Shutdown() StopREST(); StopRPC(); StopHTTPServer(); -#ifdef ENABLE_WALLET - FlushWallets(); -#endif + g_wallet_init_interface->Flush(); StopMapPort(); // Because these depend on each-other, we make sure that neither can be @@ -208,7 +204,7 @@ void Shutdown() threadGroup.interrupt_all(); threadGroup.join_all(); - if (fDumpMempoolLater && gArgs.GetArg("-persistmempool", DEFAULT_PERSIST_MEMPOOL)) { + if (g_is_mempool_loaded && gArgs.GetArg("-persistmempool", DEFAULT_PERSIST_MEMPOOL)) { DumpMempool(); } @@ -249,9 +245,7 @@ void Shutdown() pcoinsdbview.reset(); pblocktree.reset(); } -#ifdef ENABLE_WALLET - StopWallets(); -#endif + g_wallet_init_interface->Stop(); #if ENABLE_ZMQ if (pzmqNotificationInterface) { @@ -271,9 +265,8 @@ void Shutdown() UnregisterAllValidationInterfaces(); GetMainSignals().UnregisterBackgroundSignalScheduler(); GetMainSignals().UnregisterWithMempoolSignals(mempool); -#ifdef ENABLE_WALLET - CloseWallets(); -#endif + g_wallet_init_interface->Close(); + g_wallet_init_interface.reset(); globalVerifyHandle.reset(); ECC_Stop(); LogPrintf("%s: done\n", __func__); @@ -333,12 +326,13 @@ std::string HelpMessage(HelpMessageMode mode) strUsage += HelpMessageOpt("-version", _("Print version and exit")); strUsage += HelpMessageOpt("-alertnotify=<cmd>", _("Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)")); strUsage +=HelpMessageOpt("-assumevalid=<hex>", strprintf(_("If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: %s, testnet: %s)"), defaultChainParams->GetConsensus().defaultAssumeValid.GetHex(), testnetChainParams->GetConsensus().defaultAssumeValid.GetHex())); + strUsage += HelpMessageOpt("-blocksdir=<dir>", _("Specify blocks directory (default: <datadir>/blocks)")); strUsage += HelpMessageOpt("-blocknotify=<cmd>", _("Execute command when the best block changes (%s in cmd is replaced by block hash)")); strUsage += HelpMessageOpt("-blockreconstructionextratxn=<n>", strprintf(_("Extra transactions to keep in memory for compact block reconstructions (default: %u)"), DEFAULT_BLOCK_RECONSTRUCTION_EXTRA_TXN)); if (showDebug) strUsage += HelpMessageOpt("-blocksonly", strprintf(_("Whether to operate in a blocks only mode (default: %u)"), DEFAULT_BLOCKSONLY)); strUsage += HelpMessageOpt("-conf=<file>", strprintf(_("Specify configuration file. Relative paths will be prefixed by datadir location. (default: %s)"), BITCOIN_CONF_FILENAME)); - if (mode == HMM_BITCOIND) + if (mode == HelpMessageMode::BITCOIND) { #if HAVE_DECL_DAEMON strUsage += HelpMessageOpt("-daemon", _("Run in the background as a daemon and accept commands")); @@ -415,9 +409,7 @@ std::string HelpMessage(HelpMessageMode mode) strUsage += HelpMessageOpt("-whitelist=<IP address or network>", _("Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple times.") + " " + _("Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway")); -#ifdef ENABLE_WALLET - strUsage += GetWalletHelpString(showDebug); -#endif + strUsage += g_wallet_init_interface->GetHelpString(showDebug); #if ENABLE_ZMQ strUsage += HelpMessageGroup(_("ZeroMQ notification options:")); @@ -428,18 +420,16 @@ std::string HelpMessage(HelpMessageMode mode) #endif strUsage += HelpMessageGroup(_("Debugging/Testing options:")); - if (showDebug) - { + if (showDebug) { strUsage += HelpMessageOpt("-checkblocks=<n>", strprintf(_("How many blocks to check at startup (default: %u, 0 = all)"), DEFAULT_CHECKBLOCKS)); strUsage += HelpMessageOpt("-checklevel=<n>", strprintf(_("How thorough the block verification of -checkblocks is (0-4, default: %u)"), DEFAULT_CHECKLEVEL)); - strUsage += HelpMessageOpt("-checkblockindex", strprintf("Do a full consistency check for mapBlockIndex, setBlockIndexCandidates, chainActive and mapBlocksUnlinked occasionally. Also sets -checkmempool (default: %u)", defaultChainParams->DefaultConsistencyChecks())); + strUsage += HelpMessageOpt("-checkblockindex", strprintf("Do a full consistency check for mapBlockIndex, setBlockIndexCandidates, chainActive and mapBlocksUnlinked occasionally. (default: %u)", defaultChainParams->DefaultConsistencyChecks())); strUsage += HelpMessageOpt("-checkmempool=<n>", strprintf("Run checks every <n> transactions (default: %u)", defaultChainParams->DefaultConsistencyChecks())); strUsage += HelpMessageOpt("-checkpoints", strprintf("Disable expensive verification for known chain history (default: %u)", DEFAULT_CHECKPOINTS_ENABLED)); strUsage += HelpMessageOpt("-disablesafemode", strprintf("Disable safemode, override a real safe mode event (default: %u)", DEFAULT_DISABLE_SAFEMODE)); strUsage += HelpMessageOpt("-deprecatedrpc=<method>", "Allows deprecated RPC method(s) to be used"); strUsage += HelpMessageOpt("-testsafemode", strprintf("Force safe mode (default: %u)", DEFAULT_TESTSAFEMODE)); strUsage += HelpMessageOpt("-dropmessagestest=<n>", "Randomly drop 1 of every <n> network messages"); - strUsage += HelpMessageOpt("-fuzzmessagestest=<n>", "Randomly fuzz 1 of every <n> network messages"); strUsage += HelpMessageOpt("-stopafterblockimport", strprintf("Stop running after importing blocks from disk (default: %u)", DEFAULT_STOPAFTERBLOCKIMPORT)); strUsage += HelpMessageOpt("-stopatheight", strprintf("Stop running after reaching the given height in the main chain (default: %u)", DEFAULT_STOPATHEIGHT)); @@ -491,8 +481,6 @@ std::string HelpMessage(HelpMessageMode mode) strUsage += HelpMessageOpt("-whitelistrelay", strprintf(_("Accept relayed transactions received from whitelisted peers even when not relaying transactions (default: %d)"), DEFAULT_WHITELISTRELAY)); strUsage += HelpMessageGroup(_("Block creation options:")); - if (showDebug) - strUsage += HelpMessageOpt("-blockmaxsize=<n>", "Set maximum BIP141 block weight to this * 4. Deprecated, use blockmaxweight"); strUsage += HelpMessageOpt("-blockmaxweight=<n>", strprintf(_("Set maximum BIP141 block weight (default: %d)"), DEFAULT_BLOCK_MAX_WEIGHT)); strUsage += HelpMessageOpt("-blockmintxfee=<amt>", strprintf(_("Set lowest fee rate (in %s/kB) for transactions to be included in block creation. (default: %s)"), CURRENCY_UNIT, FormatMoney(DEFAULT_BLOCK_MIN_TX_FEE))); if (showDebug) @@ -596,7 +584,7 @@ void CleanupBlockRevFiles() // Remove the rev files immediately and insert the blk file paths into an // ordered map keyed by block file index. LogPrintf("Removing unusable blk?????.dat and rev?????.dat files for -reindex with -prune\n"); - fs::path blocksdir = GetDataDir() / "blocks"; + fs::path blocksdir = GetBlocksDir(); for (fs::directory_iterator it(blocksdir); it != fs::directory_iterator(); it++) { if (fs::is_regular_file(*it) && it->path().filename().string().length() == 12 && @@ -693,8 +681,8 @@ void ThreadImport(std::vector<fs::path> vImportFiles) } // End scope of CImportingNow if (gArgs.GetArg("-persistmempool", DEFAULT_PERSIST_MEMPOOL)) { LoadMempool(); - fDumpMempoolLater = !fRequestShutdown; } + g_is_mempool_loaded = !fRequestShutdown; } /** Sanity checks @@ -798,15 +786,6 @@ void InitParameterInteraction() if (gArgs.SoftSetBoolArg("-whitelistrelay", true)) LogPrintf("%s: parameter interaction: -whitelistforcerelay=1 -> setting -whitelistrelay=1\n", __func__); } - - if (gArgs.IsArgSet("-blockmaxsize")) { - unsigned int max_size = gArgs.GetArg("-blockmaxsize", 0); - if (gArgs.SoftSetArg("blockmaxweight", strprintf("%d", max_size * WITNESS_SCALE_FACTOR))) { - LogPrintf("%s: parameter interaction: -blockmaxsize=%d -> setting -blockmaxweight=%d (-blockmaxsize is deprecated!)\n", __func__, max_size, max_size * WITNESS_SCALE_FACTOR); - } else { - LogPrintf("%s: Ignoring blockmaxsize setting which is overridden by blockmaxweight", __func__); - } - } } static std::string ResolveErrMsg(const char * const optname, const std::string& strBind) @@ -908,6 +887,10 @@ bool AppInitParameterInteraction() // also see: InitParameterInteraction() + if (!fs::is_directory(GetBlocksDir(false))) { + return InitError(strprintf(_("Specified blocks directory \"%s\" does not exist.\n"), gArgs.GetArg("-blocksdir", "").c_str())); + } + // if using block pruning, then disallow txindex if (gArgs.GetArg("-prune", 0)) { if (gArgs.GetBoolArg("-txindex", DEFAULT_TXINDEX)) @@ -1093,10 +1076,7 @@ bool AppInitParameterInteraction() return InitError(strprintf("acceptnonstdtxn is not currently supported for %s chain", chainparams.NetworkIDString())); nBytesPerSigOp = gArgs.GetArg("-bytespersigop", nBytesPerSigOp); -#ifdef ENABLE_WALLET - if (!WalletParameterInteraction()) - return false; -#endif + if (!g_wallet_init_interface->ParameterInteraction()) return false; fIsBareMultisigStd = gArgs.GetBoolArg("-permitbaremultisig", DEFAULT_PERMIT_BAREMULTISIG); fAcceptDatacarrier = gArgs.GetBoolArg("-datacarrier", DEFAULT_ACCEPT_DATACARRIER); @@ -1165,6 +1145,9 @@ static bool LockDataDirectory(bool probeOnly) { // Make sure only a single Bitcoin process is using the data directory. fs::path datadir = GetDataDir(); + if (!DirIsWritable(datadir)) { + return InitError(strprintf(_("Cannot write to data directory '%s'; check permissions."), datadir.string())); + } if (!LockDirectory(datadir, ".lock", probeOnly)) { return InitError(strprintf(_("Cannot obtain a lock on data directory %s. %s is probably already running."), datadir.string(), _(PACKAGE_NAME))); } @@ -1259,9 +1242,7 @@ bool AppInitMain() * available in the GUI RPC console even if external calls are disabled. */ RegisterAllCoreRPCCommands(tableRPC); -#ifdef ENABLE_WALLET - RegisterWalletRPC(tableRPC); -#endif + g_wallet_init_interface->RegisterRPC(tableRPC); /* Start the RPC server already. It will be started in "warmup" mode * and not really process calls already (but it will signify connections @@ -1278,10 +1259,8 @@ bool AppInitMain() int64_t nStart; // ********************************************************* Step 5: verify wallet database integrity -#ifdef ENABLE_WALLET - if (!VerifyWallets()) - return false; -#endif + if (!g_wallet_init_interface->Verify()) return false; + // ********************************************************* Step 6: network initialization // Note that we absolutely cannot open any actual connections // until the very end ("start node") as the UTXO/block state @@ -1599,12 +1578,7 @@ bool AppInitMain() fFeeEstimatesInitialized = true; // ********************************************************* Step 8: load wallet -#ifdef ENABLE_WALLET - if (!OpenWallets()) - return false; -#else - LogPrintf("No wallet support compiled in!\n"); -#endif + if (!g_wallet_init_interface->Open()) return false; // ********************************************************* Step 9: data directory maintenance @@ -1630,7 +1604,7 @@ bool AppInitMain() // ********************************************************* Step 10: import blocks - if (!CheckDiskSpace()) + if (!CheckDiskSpace() && !CheckDiskSpace(0, true)) return false; // Either install a handler to notify us when genesis activates, or set fHaveGenesis directly. @@ -1750,9 +1724,7 @@ bool AppInitMain() SetRPCWarmupFinished(); uiInterface.InitMessage(_("Done loading")); -#ifdef ENABLE_WALLET - StartWallets(scheduler); -#endif + g_wallet_init_interface->Start(scheduler); return true; } |