diff options
Diffstat (limited to 'src/bitcoin-cli.cpp')
| -rw-r--r-- | src/bitcoin-cli.cpp | 84 |
1 files changed, 51 insertions, 33 deletions
diff --git a/src/bitcoin-cli.cpp b/src/bitcoin-cli.cpp index 34472a0e61..b332b5e581 100644 --- a/src/bitcoin-cli.cpp +++ b/src/bitcoin-cli.cpp @@ -29,29 +29,43 @@ static const int DEFAULT_HTTP_CLIENT_TIMEOUT=900; static const bool DEFAULT_NAMED=false; static const int CONTINUE_EXECUTION=-1; -static std::string HelpMessageCli() +static void SetupCliArgs() { const auto defaultBaseParams = CreateBaseChainParams(CBaseChainParams::MAIN); const auto testnetBaseParams = CreateBaseChainParams(CBaseChainParams::TESTNET); - std::string strUsage; - strUsage += HelpMessageGroup(_("Options:")); - strUsage += HelpMessageOpt("-?", _("This help message")); - strUsage += HelpMessageOpt("-conf=<file>", strprintf(_("Specify configuration file. Relative paths will be prefixed by datadir location. (default: %s)"), BITCOIN_CONF_FILENAME)); - strUsage += HelpMessageOpt("-datadir=<dir>", _("Specify data directory")); - strUsage += HelpMessageOpt("-getinfo", _("Get general information from the remote server. Note that unlike server-side RPC calls, the results of -getinfo is the result of multiple non-atomic requests. Some entries in the result may represent results from different states (e.g. wallet balance may be as of a different block from the chain state reported)")); - AppendParamsHelpMessages(strUsage); - strUsage += HelpMessageOpt("-named", strprintf(_("Pass named instead of positional arguments (default: %s)"), DEFAULT_NAMED)); - strUsage += HelpMessageOpt("-rpcclienttimeout=<n>", strprintf(_("Timeout in seconds during HTTP requests, or 0 for no timeout. (default: %d)"), DEFAULT_HTTP_CLIENT_TIMEOUT)); - strUsage += HelpMessageOpt("-rpcconnect=<ip>", strprintf(_("Send commands to node running on <ip> (default: %s)"), DEFAULT_RPCCONNECT)); - strUsage += HelpMessageOpt("-rpcpassword=<pw>", _("Password for JSON-RPC connections")); - strUsage += HelpMessageOpt("-rpcport=<port>", strprintf(_("Connect to JSON-RPC on <port> (default: %u or testnet: %u)"), defaultBaseParams->RPCPort(), testnetBaseParams->RPCPort())); - strUsage += HelpMessageOpt("-rpcuser=<user>", _("Username for JSON-RPC connections")); - strUsage += HelpMessageOpt("-rpcwait", _("Wait for RPC server to start")); - strUsage += HelpMessageOpt("-rpcwallet=<walletname>", _("Send RPC for non-default wallet on RPC server (needs to exactly match corresponding -wallet option passed to bitcoind)")); - strUsage += HelpMessageOpt("-stdin", _("Read extra arguments from standard input, one per line until EOF/Ctrl-D (recommended for sensitive information such as passphrases). When combined with -stdinrpcpass, the first line from standard input is used for the RPC password.")); - strUsage += HelpMessageOpt("-stdinrpcpass", strprintf(_("Read RPC password from standard input as a single line. When combined with -stdin, the first line from standard input is used for the RPC password."))); - - return strUsage; + + gArgs.AddArg("-?", "This help message", false, OptionsCategory::OPTIONS); + gArgs.AddArg("-conf=<file>", strprintf("Specify configuration file. Relative paths will be prefixed by datadir location. (default: %s)", BITCOIN_CONF_FILENAME), false, OptionsCategory::OPTIONS); + gArgs.AddArg("-datadir=<dir>", "Specify data directory", false, OptionsCategory::OPTIONS); + gArgs.AddArg("-getinfo", "Get general information from the remote server. Note that unlike server-side RPC calls, the results of -getinfo is the result of multiple non-atomic requests. Some entries in the result may represent results from different states (e.g. wallet balance may be as of a different block from the chain state reported)", false, OptionsCategory::OPTIONS); + SetupChainParamsBaseOptions(); + gArgs.AddArg("-named", strprintf("Pass named instead of positional arguments (default: %s)", DEFAULT_NAMED), false, OptionsCategory::OPTIONS); + gArgs.AddArg("-rpcclienttimeout=<n>", strprintf("Timeout in seconds during HTTP requests, or 0 for no timeout. (default: %d)", DEFAULT_HTTP_CLIENT_TIMEOUT), false, OptionsCategory::OPTIONS); + gArgs.AddArg("-rpcconnect=<ip>", strprintf("Send commands to node running on <ip> (default: %s)", DEFAULT_RPCCONNECT), false, OptionsCategory::OPTIONS); + gArgs.AddArg("-rpccookiefile=<loc>", _("Location of the auth cookie. Relative paths will be prefixed by a net-specific datadir location. (default: data dir)"), false, OptionsCategory::OPTIONS); + gArgs.AddArg("-rpcpassword=<pw>", "Password for JSON-RPC connections", false, OptionsCategory::OPTIONS); + gArgs.AddArg("-rpcport=<port>", strprintf("Connect to JSON-RPC on <port> (default: %u or testnet: %u)", defaultBaseParams->RPCPort(), testnetBaseParams->RPCPort()), false, OptionsCategory::OPTIONS); + gArgs.AddArg("-rpcuser=<user>", "Username for JSON-RPC connections", false, OptionsCategory::OPTIONS); + gArgs.AddArg("-rpcwait", "Wait for RPC server to start", false, OptionsCategory::OPTIONS); + gArgs.AddArg("-rpcwallet=<walletname>", "Send RPC for non-default wallet on RPC server (needs to exactly match corresponding -wallet option passed to bitcoind)", false, OptionsCategory::OPTIONS); + gArgs.AddArg("-stdin", "Read extra arguments from standard input, one per line until EOF/Ctrl-D (recommended for sensitive information such as passphrases). When combined with -stdinrpcpass, the first line from standard input is used for the RPC password.", false, OptionsCategory::OPTIONS); + gArgs.AddArg("-stdinrpcpass", strprintf("Read RPC password from standard input as a single line. When combined with -stdin, the first line from standard input is used for the RPC password."), false, OptionsCategory::OPTIONS); + + // Hidden + gArgs.AddArg("-h", "", false, OptionsCategory::HIDDEN); + gArgs.AddArg("-help", "", false, OptionsCategory::HIDDEN); +} + +/** libevent event log callback */ +static void libevent_log_cb(int severity, const char *msg) +{ +#ifndef EVENT_LOG_ERR // EVENT_LOG_ERR was added in 2.0.19; but before then _EVENT_LOG_ERR existed. +# define EVENT_LOG_ERR _EVENT_LOG_ERR +#endif + // Ignore everything other than errors + if (severity >= EVENT_LOG_ERR) { + throw std::runtime_error(strprintf("libevent error: %s", msg)); + } } ////////////////////////////////////////////////////////////////////////////// @@ -82,17 +96,22 @@ static int AppInitRPC(int argc, char* argv[]) // // Parameters // - gArgs.ParseParameters(argc, argv); + SetupCliArgs(); + std::string error; + if (!gArgs.ParseParameters(argc, argv, error)) { + fprintf(stderr, "Error parsing command line arguments: %s\n", error.c_str()); + return EXIT_FAILURE; + } if (argc < 2 || HelpRequested(gArgs) || gArgs.IsArgSet("-version")) { - std::string strUsage = strprintf(_("%s RPC client version"), _(PACKAGE_NAME)) + " " + FormatFullVersion() + "\n"; + std::string strUsage = strprintf("%s RPC client version", PACKAGE_NAME) + " " + FormatFullVersion() + "\n"; if (!gArgs.IsArgSet("-version")) { - strUsage += "\n" + _("Usage:") + "\n" + - " bitcoin-cli [options] <command> [params] " + strprintf(_("Send command to %s"), _(PACKAGE_NAME)) + "\n" + - " bitcoin-cli [options] -named <command> [name=value] ... " + strprintf(_("Send command to %s (with named arguments)"), _(PACKAGE_NAME)) + "\n" + - " bitcoin-cli [options] help " + _("List commands") + "\n" + - " bitcoin-cli [options] help <command> " + _("Get help for a command") + "\n"; + strUsage += "\nUsage:\n" + " bitcoin-cli [options] <command> [params] " + strprintf("Send command to %s", PACKAGE_NAME) + "\n" + + " bitcoin-cli [options] -named <command> [name=value] ... " + strprintf("Send command to %s (with named arguments)", PACKAGE_NAME) + "\n" + + " bitcoin-cli [options] help List commands\n" + + " bitcoin-cli [options] help <command> Get help for a command\n"; - strUsage += "\n" + HelpMessageCli(); + strUsage += "\n" + gArgs.GetHelpMessage(); } fprintf(stdout, "%s", strUsage.c_str()); @@ -106,10 +125,8 @@ static int AppInitRPC(int argc, char* argv[]) fprintf(stderr, "Error: Specified data directory \"%s\" does not exist.\n", gArgs.GetArg("-datadir", "").c_str()); return EXIT_FAILURE; } - try { - gArgs.ReadConfigFile(gArgs.GetArg("-conf", BITCOIN_CONF_FILENAME)); - } catch (const std::exception& e) { - fprintf(stderr,"Error reading configuration file: %s\n", e.what()); + if (!gArgs.ReadConfigFiles(error, true)) { + fprintf(stderr, "Error reading configuration file: %s\n", error.c_str()); return EXIT_FAILURE; } // Check for -testnet or -regtest parameter (BaseParams() calls are only valid after this clause) @@ -366,7 +383,7 @@ static UniValue CallRPC(BaseRequestHandler *rh, const std::string& strMethod, co } else if (response.status == HTTP_UNAUTHORIZED) { if (failedToGetAuthCookie) { throw std::runtime_error(strprintf( - _("Could not locate RPC credentials. No authentication cookie could be found, and RPC password is not set. See -rpcpassword and -stdinrpcpass. Configuration file: (%s)"), + "Could not locate RPC credentials. No authentication cookie could be found, and RPC password is not set. See -rpcpassword and -stdinrpcpass. Configuration file: (%s)", GetConfigFile(gArgs.GetArg("-conf", BITCOIN_CONF_FILENAME)).string().c_str())); } else { throw std::runtime_error("Authorization failed: Incorrect rpcuser or rpcpassword"); @@ -501,6 +518,7 @@ int main(int argc, char* argv[]) fprintf(stderr, "Error: Initializing networking failed\n"); return EXIT_FAILURE; } + event_set_log_callback(&libevent_log_cb); try { int ret = AppInitRPC(argc, argv); |