diff options
Diffstat (limited to 'src/bitcoin-cli.cpp')
| -rw-r--r-- | src/bitcoin-cli.cpp | 34 |
1 files changed, 17 insertions, 17 deletions
diff --git a/src/bitcoin-cli.cpp b/src/bitcoin-cli.cpp index 0651d250a8..cf52b710cb 100644 --- a/src/bitcoin-cli.cpp +++ b/src/bitcoin-cli.cpp @@ -51,24 +51,24 @@ static void SetupCliArgs(ArgsManager& argsman) const auto testnetBaseParams = CreateBaseChainParams(CBaseChainParams::TESTNET); const auto regtestBaseParams = CreateBaseChainParams(CBaseChainParams::REGTEST); - gArgs.AddArg("-version", "Print version and exit", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); - gArgs.AddArg("-conf=<file>", strprintf("Specify configuration file. Relative paths will be prefixed by datadir location. (default: %s)", BITCOIN_CONF_FILENAME), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); - gArgs.AddArg("-datadir=<dir>", "Specify data directory", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); - gArgs.AddArg("-generate", strprintf("Generate blocks immediately, equivalent to RPC generatenewaddress followed by RPC generatetoaddress. Optional positional integer arguments are number of blocks to generate (default: %s) and maximum iterations to try (default: %s), equivalent to RPC generatetoaddress nblocks and maxtries arguments. Example: bitcoin-cli -generate 4 1000", DEFAULT_NBLOCKS, DEFAULT_MAX_TRIES), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); - gArgs.AddArg("-getinfo", "Get general information from the remote server. Note that unlike server-side RPC calls, the results of -getinfo is the result of multiple non-atomic requests. Some entries in the result may represent results from different states (e.g. wallet balance may be as of a different block from the chain state reported)", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); + argsman.AddArg("-version", "Print version and exit", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); + argsman.AddArg("-conf=<file>", strprintf("Specify configuration file. Relative paths will be prefixed by datadir location. (default: %s)", BITCOIN_CONF_FILENAME), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); + argsman.AddArg("-datadir=<dir>", "Specify data directory", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); + argsman.AddArg("-generate", strprintf("Generate blocks immediately, equivalent to RPC generatenewaddress followed by RPC generatetoaddress. Optional positional integer arguments are number of blocks to generate (default: %s) and maximum iterations to try (default: %s), equivalent to RPC generatetoaddress nblocks and maxtries arguments. Example: bitcoin-cli -generate 4 1000", DEFAULT_NBLOCKS, DEFAULT_MAX_TRIES), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); + argsman.AddArg("-getinfo", "Get general information from the remote server. Note that unlike server-side RPC calls, the results of -getinfo is the result of multiple non-atomic requests. Some entries in the result may represent results from different states (e.g. wallet balance may be as of a different block from the chain state reported)", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); SetupChainParamsBaseOptions(argsman); - gArgs.AddArg("-named", strprintf("Pass named instead of positional arguments (default: %s)", DEFAULT_NAMED), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); - gArgs.AddArg("-rpcclienttimeout=<n>", strprintf("Timeout in seconds during HTTP requests, or 0 for no timeout. (default: %d)", DEFAULT_HTTP_CLIENT_TIMEOUT), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); - gArgs.AddArg("-rpcconnect=<ip>", strprintf("Send commands to node running on <ip> (default: %s)", DEFAULT_RPCCONNECT), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); - gArgs.AddArg("-rpccookiefile=<loc>", "Location of the auth cookie. Relative paths will be prefixed by a net-specific datadir location. (default: data dir)", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); - gArgs.AddArg("-rpcpassword=<pw>", "Password for JSON-RPC connections", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); - gArgs.AddArg("-rpcport=<port>", strprintf("Connect to JSON-RPC on <port> (default: %u, testnet: %u, regtest: %u)", defaultBaseParams->RPCPort(), testnetBaseParams->RPCPort(), regtestBaseParams->RPCPort()), ArgsManager::ALLOW_ANY | ArgsManager::NETWORK_ONLY, OptionsCategory::OPTIONS); - gArgs.AddArg("-rpcuser=<user>", "Username for JSON-RPC connections", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); - gArgs.AddArg("-rpcwait", "Wait for RPC server to start", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); - gArgs.AddArg("-rpcwallet=<walletname>", "Send RPC for non-default wallet on RPC server (needs to exactly match corresponding -wallet option passed to bitcoind). This changes the RPC endpoint used, e.g. http://127.0.0.1:8332/wallet/<walletname>", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); - gArgs.AddArg("-stdin", "Read extra arguments from standard input, one per line until EOF/Ctrl-D (recommended for sensitive information such as passphrases). When combined with -stdinrpcpass, the first line from standard input is used for the RPC password.", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); - gArgs.AddArg("-stdinrpcpass", "Read RPC password from standard input as a single line. When combined with -stdin, the first line from standard input is used for the RPC password. When combined with -stdinwalletpassphrase, -stdinrpcpass consumes the first line, and -stdinwalletpassphrase consumes the second.", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); - gArgs.AddArg("-stdinwalletpassphrase", "Read wallet passphrase from standard input as a single line. When combined with -stdin, the first line from standard input is used for the wallet passphrase.", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); + argsman.AddArg("-named", strprintf("Pass named instead of positional arguments (default: %s)", DEFAULT_NAMED), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); + argsman.AddArg("-rpcclienttimeout=<n>", strprintf("Timeout in seconds during HTTP requests, or 0 for no timeout. (default: %d)", DEFAULT_HTTP_CLIENT_TIMEOUT), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); + argsman.AddArg("-rpcconnect=<ip>", strprintf("Send commands to node running on <ip> (default: %s)", DEFAULT_RPCCONNECT), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); + argsman.AddArg("-rpccookiefile=<loc>", "Location of the auth cookie. Relative paths will be prefixed by a net-specific datadir location. (default: data dir)", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); + argsman.AddArg("-rpcpassword=<pw>", "Password for JSON-RPC connections", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); + argsman.AddArg("-rpcport=<port>", strprintf("Connect to JSON-RPC on <port> (default: %u, testnet: %u, regtest: %u)", defaultBaseParams->RPCPort(), testnetBaseParams->RPCPort(), regtestBaseParams->RPCPort()), ArgsManager::ALLOW_ANY | ArgsManager::NETWORK_ONLY, OptionsCategory::OPTIONS); + argsman.AddArg("-rpcuser=<user>", "Username for JSON-RPC connections", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); + argsman.AddArg("-rpcwait", "Wait for RPC server to start", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); + argsman.AddArg("-rpcwallet=<walletname>", "Send RPC for non-default wallet on RPC server (needs to exactly match corresponding -wallet option passed to bitcoind). This changes the RPC endpoint used, e.g. http://127.0.0.1:8332/wallet/<walletname>", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); + argsman.AddArg("-stdin", "Read extra arguments from standard input, one per line until EOF/Ctrl-D (recommended for sensitive information such as passphrases). When combined with -stdinrpcpass, the first line from standard input is used for the RPC password.", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); + argsman.AddArg("-stdinrpcpass", "Read RPC password from standard input as a single line. When combined with -stdin, the first line from standard input is used for the RPC password. When combined with -stdinwalletpassphrase, -stdinrpcpass consumes the first line, and -stdinwalletpassphrase consumes the second.", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); + argsman.AddArg("-stdinwalletpassphrase", "Read wallet passphrase from standard input as a single line. When combined with -stdin, the first line from standard input is used for the wallet passphrase.", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS); } /** libevent event log callback */ |