diff options
Diffstat (limited to 'qa/rpc-tests')
-rwxr-xr-x | qa/rpc-tests/abandonconflict.py | 26 | ||||
-rwxr-xr-x | qa/rpc-tests/p2p-segwit.py | 10 | ||||
-rwxr-xr-x | qa/rpc-tests/rpcbind_test.py | 219 | ||||
-rw-r--r-- | qa/rpc-tests/test_framework/blockstore.py | 3 | ||||
-rw-r--r-- | qa/rpc-tests/test_framework/script.py | 2 | ||||
-rw-r--r-- | qa/rpc-tests/test_framework/util.py | 10 | ||||
-rwxr-xr-x | qa/rpc-tests/wallet-dump.py | 104 | ||||
-rwxr-xr-x | qa/rpc-tests/wallet.py | 5 | ||||
-rwxr-xr-x | qa/rpc-tests/walletbackup.py | 7 |
9 files changed, 236 insertions, 150 deletions
diff --git a/qa/rpc-tests/abandonconflict.py b/qa/rpc-tests/abandonconflict.py index c50c3cc562..874df48777 100755 --- a/qa/rpc-tests/abandonconflict.py +++ b/qa/rpc-tests/abandonconflict.py @@ -68,7 +68,7 @@ class AbandonConflictTest(BitcoinTestFramework): # In mempool txs from self should increase balance from change newbalance = self.nodes[0].getbalance() - assert(newbalance == balance - Decimal("30") + Decimal("24.9996")) + assert_equal(newbalance, balance - Decimal("30") + Decimal("24.9996")) balance = newbalance # Restart the node with a higher min relay fee so the parent tx is no longer in mempool @@ -78,16 +78,16 @@ class AbandonConflictTest(BitcoinTestFramework): self.nodes[0]=start_node(0, self.options.tmpdir, ["-debug","-logtimemicros","-minrelaytxfee=0.0001"]) # Verify txs no longer in mempool - assert(len(self.nodes[0].getrawmempool()) == 0) + assert_equal(len(self.nodes[0].getrawmempool()), 0) # Not in mempool txs from self should only reduce balance # inputs are still spent, but change not received newbalance = self.nodes[0].getbalance() - assert(newbalance == balance - Decimal("24.9996")) + assert_equal(newbalance, balance - Decimal("24.9996")) # Unconfirmed received funds that are not in mempool, also shouldn't show # up in unconfirmed balance unconfbalance = self.nodes[0].getunconfirmedbalance() + self.nodes[0].getbalance() - assert(unconfbalance == newbalance) + assert_equal(unconfbalance, newbalance) # Also shouldn't show up in listunspent assert(not txABC2 in [utxo["txid"] for utxo in self.nodes[0].listunspent(0)]) balance = newbalance @@ -96,35 +96,35 @@ class AbandonConflictTest(BitcoinTestFramework): # including that the child tx was also abandoned self.nodes[0].abandontransaction(txAB1) newbalance = self.nodes[0].getbalance() - assert(newbalance == balance + Decimal("30")) + assert_equal(newbalance, balance + Decimal("30")) balance = newbalance # Verify that even with a low min relay fee, the tx is not reaccepted from wallet on startup once abandoned stop_node(self.nodes[0],0) self.nodes[0]=start_node(0, self.options.tmpdir, ["-debug","-logtimemicros","-minrelaytxfee=0.00001"]) - assert(len(self.nodes[0].getrawmempool()) == 0) - assert(self.nodes[0].getbalance() == balance) + assert_equal(len(self.nodes[0].getrawmempool()), 0) + assert_equal(self.nodes[0].getbalance(), balance) # But if its received again then it is unabandoned # And since now in mempool, the change is available # But its child tx remains abandoned self.nodes[0].sendrawtransaction(signed["hex"]) newbalance = self.nodes[0].getbalance() - assert(newbalance == balance - Decimal("20") + Decimal("14.99998")) + assert_equal(newbalance, balance - Decimal("20") + Decimal("14.99998")) balance = newbalance # Send child tx again so its unabandoned self.nodes[0].sendrawtransaction(signed2["hex"]) newbalance = self.nodes[0].getbalance() - assert(newbalance == balance - Decimal("10") - Decimal("14.99998") + Decimal("24.9996")) + assert_equal(newbalance, balance - Decimal("10") - Decimal("14.99998") + Decimal("24.9996")) balance = newbalance # Remove using high relay fee again stop_node(self.nodes[0],0) self.nodes[0]=start_node(0, self.options.tmpdir, ["-debug","-logtimemicros","-minrelaytxfee=0.0001"]) - assert(len(self.nodes[0].getrawmempool()) == 0) + assert_equal(len(self.nodes[0].getrawmempool()), 0) newbalance = self.nodes[0].getbalance() - assert(newbalance == balance - Decimal("24.9996")) + assert_equal(newbalance, balance - Decimal("24.9996")) balance = newbalance # Create a double spend of AB1 by spending again from only A's 10 output @@ -143,7 +143,7 @@ class AbandonConflictTest(BitcoinTestFramework): # Verify that B and C's 10 BTC outputs are available for spending again because AB1 is now conflicted newbalance = self.nodes[0].getbalance() - assert(newbalance == balance + Decimal("20")) + assert_equal(newbalance, balance + Decimal("20")) balance = newbalance # There is currently a minor bug around this and so this test doesn't work. See Issue #7315 @@ -151,7 +151,7 @@ class AbandonConflictTest(BitcoinTestFramework): # Don't think C's should either self.nodes[0].invalidateblock(self.nodes[0].getbestblockhash()) newbalance = self.nodes[0].getbalance() - #assert(newbalance == balance - Decimal("10")) + #assert_equal(newbalance, balance - Decimal("10")) print("If balance has not declined after invalidateblock then out of mempool wallet tx which is no longer") print("conflicted has not resumed causing its inputs to be seen as spent. See Issue #7315") print(str(balance) + " -> " + str(newbalance) + " ?") diff --git a/qa/rpc-tests/p2p-segwit.py b/qa/rpc-tests/p2p-segwit.py index cd02692b1e..68d8b9a006 100755 --- a/qa/rpc-tests/p2p-segwit.py +++ b/qa/rpc-tests/p2p-segwit.py @@ -302,13 +302,18 @@ class SegWitTest(BitcoinTestFramework): sync_blocks(self.nodes) # We'll add an unnecessary witness to this transaction that would cause - # it to be too large according to IsStandard. + # it to be non-standard, to test that violating policy with a witness before + # segwit activation doesn't blind a node to a transaction. Transactions + # rejected for having a witness before segwit activation shouldn't be added + # to the rejection cache. tx3 = CTransaction() tx3.vin.append(CTxIn(COutPoint(tx2.sha256, 0), CScript([p2sh_program]))) tx3.vout.append(CTxOut(tx2.vout[0].nValue-1000, scriptPubKey)) tx3.wit.vtxinwit.append(CTxInWitness()) tx3.wit.vtxinwit[0].scriptWitness.stack = [b'a'*400000] tx3.rehash() + # Note that this should be rejected for the premature witness reason, + # rather than a policy check, since segwit hasn't activated yet. self.std_node.test_transaction_acceptance(tx3, True, False, b'no-witness-yet') # If we send without witness, it should be accepted. @@ -946,8 +951,7 @@ class SegWitTest(BitcoinTestFramework): self.test_node.test_transaction_acceptance(tx, with_witness=True, accepted=False) # Verify that removing the witness succeeds. - # Re-announcing won't result in a getdata for ~2.5 minutes, so just - # deliver the modified transaction. + self.test_node.announce_tx_and_wait_for_getdata(tx) self.test_node.test_transaction_acceptance(tx, with_witness=False, accepted=True) # Now try to add extra witness data to a valid witness tx. diff --git a/qa/rpc-tests/rpcbind_test.py b/qa/rpc-tests/rpcbind_test.py index 572273566b..bf1cc87126 100755 --- a/qa/rpc-tests/rpcbind_test.py +++ b/qa/rpc-tests/rpcbind_test.py @@ -5,143 +5,108 @@ # Test for -rpcbind, as well as -rpcallowip and -rpcconnect -# TODO extend this test from the test framework (like all other tests) - import tempfile import traceback +from test_framework.test_framework import BitcoinTestFramework from test_framework.util import * from test_framework.netutil import * -def run_bind_test(tmpdir, allow_ips, connect_to, addresses, expected): - ''' - Start a node with requested rpcallowip and rpcbind parameters, - then try to connect, and check if the set of bound addresses - matches the expected set. - ''' - expected = [(addr_to_hex(addr), port) for (addr, port) in expected] - base_args = ['-disablewallet', '-nolisten'] - if allow_ips: - base_args += ['-rpcallowip=' + x for x in allow_ips] - binds = ['-rpcbind='+addr for addr in addresses] - nodes = start_nodes(self.num_nodes, tmpdir, [base_args + binds], connect_to) - try: - pid = bitcoind_processes[0].pid - assert_equal(set(get_bind_addrs(pid)), set(expected)) - finally: - stop_nodes(nodes) - wait_bitcoinds() - -def run_allowip_test(tmpdir, allow_ips, rpchost, rpcport): - ''' - Start a node with rpcwallow IP, and request getinfo - at a non-localhost IP. - ''' - base_args = ['-disablewallet', '-nolisten'] + ['-rpcallowip='+x for x in allow_ips] - nodes = start_nodes(self.num_nodes, tmpdir, [base_args]) - try: - # connect to node through non-loopback interface - url = "http://rt:rt@%s:%d" % (rpchost, rpcport,) - node = get_rpc_proxy(url, 1) - node.getinfo() - finally: - node = None # make sure connection will be garbage collected and closed - stop_nodes(nodes) - wait_bitcoinds() - - -def run_test(tmpdir): - assert(sys.platform.startswith('linux')) # due to OS-specific network stats queries, this test works only on Linux - # find the first non-loopback interface for testing - non_loopback_ip = None - for name,ip in all_interfaces(): - if ip != '127.0.0.1': - non_loopback_ip = ip - break - if non_loopback_ip is None: - assert(not 'This test requires at least one non-loopback IPv4 interface') - print("Using interface %s for testing" % non_loopback_ip) +class RPCBindTest(BitcoinTestFramework): - defaultport = rpc_port(0) + def __init__(self): + super().__init__() + self.setup_clean_chain = True + self.num_nodes = 1 - # check default without rpcallowip (IPv4 and IPv6 localhost) - run_bind_test(tmpdir, None, '127.0.0.1', [], - [('127.0.0.1', defaultport), ('::1', defaultport)]) - # check default with rpcallowip (IPv6 any) - run_bind_test(tmpdir, ['127.0.0.1'], '127.0.0.1', [], - [('::0', defaultport)]) - # check only IPv4 localhost (explicit) - run_bind_test(tmpdir, ['127.0.0.1'], '127.0.0.1', ['127.0.0.1'], - [('127.0.0.1', defaultport)]) - # check only IPv4 localhost (explicit) with alternative port - run_bind_test(tmpdir, ['127.0.0.1'], '127.0.0.1:32171', ['127.0.0.1:32171'], - [('127.0.0.1', 32171)]) - # check only IPv4 localhost (explicit) with multiple alternative ports on same host - run_bind_test(tmpdir, ['127.0.0.1'], '127.0.0.1:32171', ['127.0.0.1:32171', '127.0.0.1:32172'], - [('127.0.0.1', 32171), ('127.0.0.1', 32172)]) - # check only IPv6 localhost (explicit) - run_bind_test(tmpdir, ['[::1]'], '[::1]', ['[::1]'], - [('::1', defaultport)]) - # check both IPv4 and IPv6 localhost (explicit) - run_bind_test(tmpdir, ['127.0.0.1'], '127.0.0.1', ['127.0.0.1', '[::1]'], - [('127.0.0.1', defaultport), ('::1', defaultport)]) - # check only non-loopback interface - run_bind_test(tmpdir, [non_loopback_ip], non_loopback_ip, [non_loopback_ip], - [(non_loopback_ip, defaultport)]) - - # Check that with invalid rpcallowip, we are denied - run_allowip_test(tmpdir, [non_loopback_ip], non_loopback_ip, defaultport) - try: - run_allowip_test(tmpdir, ['1.1.1.1'], non_loopback_ip, defaultport) - assert(not 'Connection not denied by rpcallowip as expected') - except ValueError: + def setup_network(self): pass -def main(): - import optparse - - parser = optparse.OptionParser(usage="%prog [options]") - parser.add_option("--nocleanup", dest="nocleanup", default=False, action="store_true", - help="Leave bitcoinds and test.* datadir on exit or error") - parser.add_option("--srcdir", dest="srcdir", default="../../src", - help="Source directory containing bitcoind/bitcoin-cli (default: %default%)") - parser.add_option("--tmpdir", dest="tmpdir", default=tempfile.mkdtemp(prefix="test"), - help="Root directory for datadirs") - (options, args) = parser.parse_args() - - os.environ['PATH'] = options.srcdir+":"+os.environ['PATH'] - - check_json_precision() - - success = False - nodes = [] - try: - print("Initializing test directory "+options.tmpdir) - if not os.path.isdir(options.tmpdir): - os.makedirs(options.tmpdir) - initialize_chain(options.tmpdir) - - run_test(options.tmpdir) - - success = True - - except AssertionError as e: - print("Assertion failed: "+e.message) - except Exception as e: - print("Unexpected exception caught during testing: "+str(e)) - traceback.print_tb(sys.exc_info()[2]) - - if not options.nocleanup: - print("Cleaning up") - wait_bitcoinds() - shutil.rmtree(options.tmpdir) + def setup_nodes(self): + pass - if success: - print("Tests successful") - sys.exit(0) - else: - print("Failed") - sys.exit(1) + def run_bind_test(self, allow_ips, connect_to, addresses, expected): + ''' + Start a node with requested rpcallowip and rpcbind parameters, + then try to connect, and check if the set of bound addresses + matches the expected set. + ''' + expected = [(addr_to_hex(addr), port) for (addr, port) in expected] + base_args = ['-disablewallet', '-nolisten'] + if allow_ips: + base_args += ['-rpcallowip=' + x for x in allow_ips] + binds = ['-rpcbind='+addr for addr in addresses] + self.nodes = start_nodes(self.num_nodes, self.options.tmpdir, [base_args + binds], connect_to) + try: + pid = bitcoind_processes[0].pid + assert_equal(set(get_bind_addrs(pid)), set(expected)) + finally: + stop_nodes(self.nodes) + wait_bitcoinds() + + def run_allowip_test(self, allow_ips, rpchost, rpcport): + ''' + Start a node with rpcwallow IP, and request getinfo + at a non-localhost IP. + ''' + base_args = ['-disablewallet', '-nolisten'] + ['-rpcallowip='+x for x in allow_ips] + self.nodes = start_nodes(self.num_nodes, self.options.tmpdir, [base_args]) + try: + # connect to node through non-loopback interface + node = get_rpc_proxy(rpc_url(0, "%s:%d" % (rpchost, rpcport)), 0) + node.getinfo() + finally: + node = None # make sure connection will be garbage collected and closed + stop_nodes(self.nodes) + wait_bitcoinds() + + def run_test(self): + # due to OS-specific network stats queries, this test works only on Linux + assert(sys.platform.startswith('linux')) + # find the first non-loopback interface for testing + non_loopback_ip = None + for name,ip in all_interfaces(): + if ip != '127.0.0.1': + non_loopback_ip = ip + break + if non_loopback_ip is None: + assert(not 'This test requires at least one non-loopback IPv4 interface') + print("Using interface %s for testing" % non_loopback_ip) + + defaultport = rpc_port(0) + + # check default without rpcallowip (IPv4 and IPv6 localhost) + self.run_bind_test(None, '127.0.0.1', [], + [('127.0.0.1', defaultport), ('::1', defaultport)]) + # check default with rpcallowip (IPv6 any) + self.run_bind_test(['127.0.0.1'], '127.0.0.1', [], + [('::0', defaultport)]) + # check only IPv4 localhost (explicit) + self.run_bind_test(['127.0.0.1'], '127.0.0.1', ['127.0.0.1'], + [('127.0.0.1', defaultport)]) + # check only IPv4 localhost (explicit) with alternative port + self.run_bind_test(['127.0.0.1'], '127.0.0.1:32171', ['127.0.0.1:32171'], + [('127.0.0.1', 32171)]) + # check only IPv4 localhost (explicit) with multiple alternative ports on same host + self.run_bind_test(['127.0.0.1'], '127.0.0.1:32171', ['127.0.0.1:32171', '127.0.0.1:32172'], + [('127.0.0.1', 32171), ('127.0.0.1', 32172)]) + # check only IPv6 localhost (explicit) + self.run_bind_test(['[::1]'], '[::1]', ['[::1]'], + [('::1', defaultport)]) + # check both IPv4 and IPv6 localhost (explicit) + self.run_bind_test(['127.0.0.1'], '127.0.0.1', ['127.0.0.1', '[::1]'], + [('127.0.0.1', defaultport), ('::1', defaultport)]) + # check only non-loopback interface + self.run_bind_test([non_loopback_ip], non_loopback_ip, [non_loopback_ip], + [(non_loopback_ip, defaultport)]) + + # Check that with invalid rpcallowip, we are denied + self.run_allowip_test([non_loopback_ip], non_loopback_ip, defaultport) + try: + self.run_allowip_test(['1.1.1.1'], non_loopback_ip, defaultport) + assert(not 'Connection not denied by rpcallowip as expected') + except JSONRPCException: + pass if __name__ == '__main__': - main() + RPCBindTest ().main () diff --git a/qa/rpc-tests/test_framework/blockstore.py b/qa/rpc-tests/test_framework/blockstore.py index 6120dd574b..1e2bbb277a 100644 --- a/qa/rpc-tests/test_framework/blockstore.py +++ b/qa/rpc-tests/test_framework/blockstore.py @@ -1,4 +1,7 @@ #!/usr/bin/env python3 +# Copyright (c) 2015-2016 The Bitcoin Core developers +# Distributed under the MIT software license, see the accompanying +# file COPYING or http://www.opensource.org/licenses/mit-license.php. # BlockStore: a helper class that keeps a map of blocks and implements # helper functions for responding to getheaders and getdata, # and for constructing a getheaders message diff --git a/qa/rpc-tests/test_framework/script.py b/qa/rpc-tests/test_framework/script.py index b46c643ccb..83bbf20479 100644 --- a/qa/rpc-tests/test_framework/script.py +++ b/qa/rpc-tests/test_framework/script.py @@ -882,7 +882,7 @@ def SignatureHash(script, txTo, inIdx, hashtype): tmp = txtmp.vout[outIdx] txtmp.vout = [] for i in range(outIdx): - txtmp.vout.append(CTxOut()) + txtmp.vout.append(CTxOut(-1)) txtmp.vout.append(tmp) for i in range(len(txtmp.vin)): diff --git a/qa/rpc-tests/test_framework/util.py b/qa/rpc-tests/test_framework/util.py index 32fe79efc3..8aa34265c5 100644 --- a/qa/rpc-tests/test_framework/util.py +++ b/qa/rpc-tests/test_framework/util.py @@ -171,7 +171,15 @@ def rpc_auth_pair(n): def rpc_url(i, rpchost=None): rpc_u, rpc_p = rpc_auth_pair(i) - return "http://%s:%s@%s:%d" % (rpc_u, rpc_p, rpchost or '127.0.0.1', rpc_port(i)) + host = '127.0.0.1' + port = rpc_port(i) + if rpchost: + parts = rpchost.split(':') + if len(parts) == 2: + host, port = parts + else: + host = rpchost + return "http://%s:%s@%s:%d" % (rpc_u, rpc_p, host, int(port)) def wait_for_bitcoind_start(process, url, i): ''' diff --git a/qa/rpc-tests/wallet-dump.py b/qa/rpc-tests/wallet-dump.py new file mode 100755 index 0000000000..6028d2c20b --- /dev/null +++ b/qa/rpc-tests/wallet-dump.py @@ -0,0 +1,104 @@ +#!/usr/bin/env python3 +# Copyright (c) 2016 The Bitcoin Core developers +# Distributed under the MIT software license, see the accompanying +# file COPYING or http://www.opensource.org/licenses/mit-license.php. + +from test_framework.test_framework import BitcoinTestFramework +from test_framework.util import (start_nodes, start_node, assert_equal, bitcoind_processes) + + +def read_dump(file_name, addrs, hd_master_addr_old): + """ + Read the given dump, count the addrs that match, count change and reserve. + Also check that the old hd_master is inactive + """ + with open(file_name) as inputfile: + found_addr = 0 + found_addr_chg = 0 + found_addr_rsv = 0 + hd_master_addr_ret = None + for line in inputfile: + # only read non comment lines + if line[0] != "#" and len(line) > 10: + # split out some data + key_label, comment = line.split("#") + # key = key_label.split(" ")[0] + keytype = key_label.split(" ")[2] + if len(comment) > 1: + addr_keypath = comment.split(" addr=")[1] + addr = addr_keypath.split(" ")[0] + keypath = None + if keytype == "inactivehdmaster=1": + # ensure the old master is still available + assert(hd_master_addr_old == addr) + elif keytype == "hdmaster=1": + # ensure we have generated a new hd master key + assert(hd_master_addr_old != addr) + hd_master_addr_ret = addr + else: + keypath = addr_keypath.rstrip().split("hdkeypath=")[1] + + # count key types + for addrObj in addrs: + if addrObj['address'] == addr and addrObj['hdkeypath'] == keypath and keytype == "label=": + found_addr += 1 + break + elif keytype == "change=1": + found_addr_chg += 1 + break + elif keytype == "reserve=1": + found_addr_rsv += 1 + break + return found_addr, found_addr_chg, found_addr_rsv, hd_master_addr_ret + + +class WalletDumpTest(BitcoinTestFramework): + + def __init__(self): + super().__init__() + self.setup_clean_chain = False + self.num_nodes = 1 + self.extra_args = [["-keypool=90"]] + + def setup_network(self, split=False): + self.nodes = start_nodes(self.num_nodes, self.options.tmpdir, self.extra_args) + + def run_test (self): + tmpdir = self.options.tmpdir + + # generate 20 addresses to compare against the dump + test_addr_count = 20 + addrs = [] + for i in range(0,test_addr_count): + addr = self.nodes[0].getnewaddress() + vaddr= self.nodes[0].validateaddress(addr) #required to get hd keypath + addrs.append(vaddr) + # Should be a no-op: + self.nodes[0].keypoolrefill() + + # dump unencrypted wallet + self.nodes[0].dumpwallet(tmpdir + "/node0/wallet.unencrypted.dump") + + found_addr, found_addr_chg, found_addr_rsv, hd_master_addr_unenc = \ + read_dump(tmpdir + "/node0/wallet.unencrypted.dump", addrs, None) + assert_equal(found_addr, test_addr_count) # all keys must be in the dump + assert_equal(found_addr_chg, 50) # 50 blocks where mined + assert_equal(found_addr_rsv, 90 + 1) # keypool size (TODO: fix off-by-one) + + #encrypt wallet, restart, unlock and dump + self.nodes[0].encryptwallet('test') + bitcoind_processes[0].wait() + self.nodes[0] = start_node(0, self.options.tmpdir, self.extra_args[0]) + self.nodes[0].walletpassphrase('test', 10) + # Should be a no-op: + self.nodes[0].keypoolrefill() + self.nodes[0].dumpwallet(tmpdir + "/node0/wallet.encrypted.dump") + + found_addr, found_addr_chg, found_addr_rsv, hd_master_addr_enc = \ + read_dump(tmpdir + "/node0/wallet.encrypted.dump", addrs, hd_master_addr_unenc) + assert_equal(found_addr, test_addr_count) + assert_equal(found_addr_chg, 90 + 1 + 50) # old reserve keys are marked as change now + assert_equal(found_addr_rsv, 90 + 1) # keypool size (TODO: fix off-by-one) + +if __name__ == '__main__': + WalletDumpTest().main () diff --git a/qa/rpc-tests/wallet.py b/qa/rpc-tests/wallet.py index 5d96e7a6e5..3420be1a2e 100755 --- a/qa/rpc-tests/wallet.py +++ b/qa/rpc-tests/wallet.py @@ -18,9 +18,10 @@ class WalletTest (BitcoinTestFramework): super().__init__() self.setup_clean_chain = True self.num_nodes = 4 + self.extra_args = [['-usehd={:d}'.format(i%2==0)] for i in range(4)] def setup_network(self, split=False): - self.nodes = start_nodes(3, self.options.tmpdir) + self.nodes = start_nodes(3, self.options.tmpdir, self.extra_args[:3]) connect_nodes_bi(self.nodes,0,1) connect_nodes_bi(self.nodes,1,2) connect_nodes_bi(self.nodes,0,2) @@ -154,7 +155,7 @@ class WalletTest (BitcoinTestFramework): txid2 = self.nodes[1].sendtoaddress(self.nodes[0].getnewaddress(), 1) sync_mempools(self.nodes) - self.nodes.append(start_node(3, self.options.tmpdir)) + self.nodes.append(start_node(3, self.options.tmpdir, self.extra_args[3])) connect_nodes_bi(self.nodes, 0, 3) sync_blocks(self.nodes) diff --git a/qa/rpc-tests/walletbackup.py b/qa/rpc-tests/walletbackup.py index b991d5c761..e12cb10a50 100755 --- a/qa/rpc-tests/walletbackup.py +++ b/qa/rpc-tests/walletbackup.py @@ -45,12 +45,12 @@ class WalletBackupTest(BitcoinTestFramework): super().__init__() self.setup_clean_chain = True self.num_nodes = 4 + # nodes 1, 2,3 are spenders, let's give them a keypool=100 + self.extra_args = [["-keypool=100"], ["-keypool=100"], ["-keypool=100"], []] # This mirrors how the network was setup in the bash test def setup_network(self, split=False): - # nodes 1, 2,3 are spenders, let's give them a keypool=100 - extra_args = [["-keypool=100"], ["-keypool=100"], ["-keypool=100"], []] - self.nodes = start_nodes(self.num_nodes, self.options.tmpdir, extra_args) + self.nodes = start_nodes(self.num_nodes, self.options.tmpdir, self.extra_args) connect_nodes(self.nodes[0], 3) connect_nodes(self.nodes[1], 3) connect_nodes(self.nodes[2], 3) @@ -79,6 +79,7 @@ class WalletBackupTest(BitcoinTestFramework): # Must sync mempools before mining. sync_mempools(self.nodes) self.nodes[3].generate(1) + sync_blocks(self.nodes) # As above, this mirrors the original bash test. def start_three(self): |