5 files changed, 15 insertions, 1477 deletions
diff --git a/doc/man/bitcoin-cli.1 b/doc/man/bitcoin-cli.1
index 129651d8e9..588ae81fce 100644
--- a/doc/man/bitcoin-cli.1
+++ b/doc/man/bitcoin-cli.1
@@ -1,115 +1,5 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.6.
-.TH BITCOIN-CLI "1" "February 2019" "bitcoin-cli v0.17.99.0" "User Commands"
+.TH BITCOIN-CLI "1"
 .SH NAME
-bitcoin-cli \- manual page for bitcoin-cli v0.17.99.0
-.SH SYNOPSIS
-.B bitcoin-cli
-[\fI\,options\/\fR] \fI\,<command> \/\fR[\fI\,params\/\fR]  \fI\,Send command to Bitcoin Core\/\fR
-.br
-.B bitcoin-cli
-[\fI\,options\/\fR] \fI\,-named <command> \/\fR[\fI\,name=value\/\fR]...  \fI\,Send command to Bitcoin Core (with named arguments)\/\fR
-.br
-.B bitcoin-cli
-[\fI\,options\/\fR] \fI\,help                List commands\/\fR
-.br
-.B bitcoin-cli
-[\fI\,options\/\fR] \fI\,help <command>      Get help for a command\/\fR
-.SH DESCRIPTION
-Bitcoin Core RPC client version v0.17.99.0
-.SH OPTIONS
-.HP
-\-?
-.IP
-Print this help message and exit
-.HP
-\fB\-conf=\fR<file>
-.IP
-Specify configuration file. Relative paths will be prefixed by datadir
-location. (default: bitcoin.conf)
-.HP
-\fB\-datadir=\fR<dir>
-.IP
-Specify data directory
-.HP
-\fB\-getinfo\fR
-.IP
-Get general information from the remote server. Note that unlike
-server\-side RPC calls, the results of \fB\-getinfo\fR is the result of
-multiple non\-atomic requests. Some entries in the result may
-represent results from different states (e.g. wallet balance may
-be as of a different block from the chain state reported)
-.HP
-\fB\-named\fR
-.IP
-Pass named instead of positional arguments (default: false)
-.HP
-\fB\-rpcclienttimeout=\fR<n>
-.IP
-Timeout in seconds during HTTP requests, or 0 for no timeout. (default:
-900)
-.HP
-\fB\-rpcconnect=\fR<ip>
-.IP
-Send commands to node running on <ip> (default: 127.0.0.1)
-.HP
-\fB\-rpccookiefile=\fR<loc>
-.IP
-Location of the auth cookie. Relative paths will be prefixed by a
-net\-specific datadir location. (default: data dir)
-.HP
-\fB\-rpcpassword=\fR<pw>
-.IP
-Password for JSON\-RPC connections
-.HP
-\fB\-rpcport=\fR<port>
-.IP
-Connect to JSON\-RPC on <port> (default: 8332, testnet: 18332, regtest:
-18443)
-.HP
-\fB\-rpcuser=\fR<user>
-.IP
-Username for JSON\-RPC connections
-.HP
-\fB\-rpcwait\fR
-.IP
-Wait for RPC server to start
-.HP
-\fB\-rpcwallet=\fR<walletname>
-.IP
-Send RPC for non\-default wallet on RPC server (needs to exactly match
-corresponding \fB\-wallet\fR option passed to bitcoind). This changes
-the RPC endpoint used, e.g.
-http://127.0.0.1:8332/wallet/<walletname>
-.HP
-\fB\-stdin\fR
-.IP
-Read extra arguments from standard input, one per line until EOF/Ctrl\-D
-(recommended for sensitive information such as passphrases). When
-combined with \fB\-stdinrpcpass\fR, the first line from standard input
-is used for the RPC password.
-.HP
-\fB\-stdinrpcpass\fR
-.IP
-Read RPC password from standard input as a single line. When combined
-with \fB\-stdin\fR, the first line from standard input is used for the
-RPC password.
-.HP
-\fB\-version\fR
-.IP
-Print version and exit
-.PP
-Chain selection options:
-.HP
-\fB\-testnet\fR
-.IP
-Use the test chain
-.SH COPYRIGHT
-Copyright (C) 2009-2019 The Bitcoin Core developers
+bitcoin-cli \- manual page for bitcoin-cli
 
-Please contribute if you find Bitcoin Core useful. Visit
-<https://bitcoincore.org> for further information about the software.
-The source code is available from <https://github.com/bitcoin/bitcoin>.
-
-This is experimental software.
-Distributed under the MIT software license, see the accompanying file COPYING
-or <https://opensource.org/licenses/MIT>
+This is a placefolder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
diff --git a/doc/man/bitcoin-qt.1 b/doc/man/bitcoin-qt.1
index f68be21e8d..9c75e9fe54 100644
--- a/doc/man/bitcoin-qt.1
+++ b/doc/man/bitcoin-qt.1
@@ -1,610 +1,5 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.6.
-.TH BITCOIN-QT "1" "February 2019" "bitcoin-qt v0.17.99.0" "User Commands"
+.TH BITCOIN-QT "1"
 .SH NAME
-bitcoin-qt \- manual page for bitcoin-qt v0.17.99.0
-.SH SYNOPSIS
-.B bitcoin-qt
-[\fI\,command-line options\/\fR]
-.SH DESCRIPTION
-Bitcoin Core version v0.17.99.0 (64\-bit)
-.SH OPTIONS
-.HP
-\-?
-.IP
-Print this help message and exit
-.HP
-\fB\-alertnotify=\fR<cmd>
-.IP
-Execute command when a relevant alert is received or we see a really
-long fork (%s in cmd is replaced by message)
-.HP
-\fB\-assumevalid=\fR<hex>
-.IP
-If this block is in the chain assume that it and its ancestors are valid
-and potentially skip their script verification (0 to verify all,
-default:
-0000000000000000002e63058c023a9a1de233554f28c7b21380b6c9003f36a8,
-testnet:
-0000000000000037a8cd3e06cd5edbfe9dd1dbcc5dacab279376ef7cfc2b4c75)
-.HP
-\fB\-blocknotify=\fR<cmd>
-.IP
-Execute command when the best block changes (%s in cmd is replaced by
-block hash)
-.HP
-\fB\-blockreconstructionextratxn=\fR<n>
-.IP
-Extra transactions to keep in memory for compact block reconstructions
-(default: 100)
-.HP
-\fB\-blocksdir=\fR<dir>
-.IP
-Specify blocks directory (default: <datadir>/blocks)
-.HP
-\fB\-conf=\fR<file>
-.IP
-Specify configuration file. Relative paths will be prefixed by datadir
-location. (default: bitcoin.conf)
-.HP
-\fB\-daemon\fR
-.IP
-Run in the background as a daemon and accept commands
-.HP
-\fB\-datadir=\fR<dir>
-.IP
-Specify data directory
-.HP
-\fB\-dbcache=\fR<n>
-.IP
-Set database cache size in MiB (4 to 16384, default: 450)
-.HP
-\fB\-debuglogfile=\fR<file>
-.IP
-Specify location of debug log file. Relative paths will be prefixed by a
-net\-specific datadir location. (\fB\-nodebuglogfile\fR to disable;
-default: debug.log)
-.HP
-\fB\-includeconf=\fR<file>
-.IP
-Specify additional configuration file, relative to the \fB\-datadir\fR path
-(only useable from configuration file, not command line)
-.HP
-\fB\-loadblock=\fR<file>
-.IP
-Imports blocks from external blk000??.dat file on startup
-.HP
-\fB\-maxmempool=\fR<n>
-.IP
-Keep the transaction memory pool below <n> megabytes (default: 300)
-.HP
-\fB\-maxorphantx=\fR<n>
-.IP
-Keep at most <n> unconnectable transactions in memory (default: 100)
-.HP
-\fB\-mempoolexpiry=\fR<n>
-.IP
-Do not keep transactions in the mempool longer than <n> hours (default:
-336)
-.HP
-\fB\-par=\fR<n>
-.IP
-Set the number of script verification threads (\fB\-8\fR to 16, 0 = auto, <0 =
-leave that many cores free, default: 0)
-.HP
-\fB\-persistmempool\fR
-.IP
-Whether to save the mempool on shutdown and load on restart (default: 1)
-.HP
-\fB\-pid=\fR<file>
-.IP
-Specify pid file. Relative paths will be prefixed by a net\-specific
-datadir location. (default: bitcoind.pid)
-.HP
-\fB\-prune=\fR<n>
-.IP
-Reduce storage requirements by enabling pruning (deleting) of old
-blocks. This allows the pruneblockchain RPC to be called to
-delete specific blocks, and enables automatic pruning of old
-blocks if a target size in MiB is provided. This mode is
-incompatible with \fB\-txindex\fR and \fB\-rescan\fR. Warning: Reverting this
-setting requires re\-downloading the entire blockchain. (default:
-0 = disable pruning blocks, 1 = allow manual pruning via RPC,
->=550 = automatically prune block files to stay under the
-specified target size in MiB)
-.HP
-\fB\-reindex\fR
-.IP
-Rebuild chain state and block index from the blk*.dat files on disk
-.HP
-\fB\-reindex\-chainstate\fR
-.IP
-Rebuild chain state from the currently indexed blocks. When in pruning
-mode or if blocks on disk might be corrupted, use full \fB\-reindex\fR
-instead.
-.HP
-\fB\-sysperms\fR
-.IP
-Create new files with system default permissions, instead of umask 077
-(only effective with disabled wallet functionality)
-.HP
-\fB\-txindex\fR
-.IP
-Maintain a full transaction index, used by the getrawtransaction rpc
-call (default: 0)
-.HP
-\fB\-version\fR
-.IP
-Print version and exit
-.PP
-Connection options:
-.HP
-\fB\-addnode=\fR<ip>
-.IP
-Add a node to connect to and attempt to keep the connection open (see
-the `addnode` RPC command help for more info). This option can be
-specified multiple times to add multiple nodes.
-.HP
-\fB\-banscore=\fR<n>
-.IP
-Threshold for disconnecting misbehaving peers (default: 100)
-.HP
-\fB\-bantime=\fR<n>
-.IP
-Number of seconds to keep misbehaving peers from reconnecting (default:
-86400)
-.HP
-\fB\-bind=\fR<addr>
-.IP
-Bind to given address and always listen on it. Use [host]:port notation
-for IPv6
-.HP
-\fB\-connect=\fR<ip>
-.IP
-Connect only to the specified node; \fB\-noconnect\fR disables automatic
-connections (the rules for this peer are the same as for
-\fB\-addnode\fR). This option can be specified multiple times to connect
-to multiple nodes.
-.HP
-\fB\-discover\fR
-.IP
-Discover own IP addresses (default: 1 when listening and no \fB\-externalip\fR
-or \fB\-proxy\fR)
-.HP
-\fB\-dns\fR
-.IP
-Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (default: 1)
-.HP
-\fB\-dnsseed\fR
-.IP
-Query for peer addresses via DNS lookup, if low on addresses (default: 1
-unless \fB\-connect\fR used)
-.HP
-\fB\-externalip=\fR<ip>
-.IP
-Specify your own public address
-.HP
-\fB\-forcednsseed\fR
-.IP
-Always query for peer addresses via DNS lookup (default: 0)
-.HP
-\fB\-listen\fR
-.IP
-Accept connections from outside (default: 1 if no \fB\-proxy\fR or \fB\-connect\fR)
-.HP
-\fB\-listenonion\fR
-.IP
-Automatically create Tor hidden service (default: 1)
-.HP
-\fB\-maxconnections=\fR<n>
-.IP
-Maintain at most <n> connections to peers (default: 125)
-.HP
-\fB\-maxreceivebuffer=\fR<n>
-.IP
-Maximum per\-connection receive buffer, <n>*1000 bytes (default: 5000)
-.HP
-\fB\-maxsendbuffer=\fR<n>
-.IP
-Maximum per\-connection send buffer, <n>*1000 bytes (default: 1000)
-.HP
-\fB\-maxtimeadjustment\fR
-.IP
-Maximum allowed median peer time offset adjustment. Local perspective of
-time may be influenced by peers forward or backward by this
-amount. (default: 4200 seconds)
-.HP
-\fB\-maxuploadtarget=\fR<n>
-.IP
-Tries to keep outbound traffic under the given target (in MiB per 24h),
-0 = no limit (default: 0)
-.HP
-\fB\-onion=\fR<ip:port>
-.IP
-Use separate SOCKS5 proxy to reach peers via Tor hidden services, set
-\fB\-noonion\fR to disable (default: \fB\-proxy\fR)
-.HP
-\fB\-onlynet=\fR<net>
-.IP
-Make outgoing connections only through network <net> (ipv4, ipv6 or
-onion). Incoming connections are not affected by this option.
-This option can be specified multiple times to allow multiple
-networks.
-.HP
-\fB\-peerbloomfilters\fR
-.IP
-Support filtering of blocks and transaction with bloom filters (default:
-1)
-.HP
-\fB\-permitbaremultisig\fR
-.IP
-Relay non\-P2SH multisig (default: 1)
-.HP
-\fB\-port=\fR<port>
-.IP
-Listen for connections on <port> (default: 8333, testnet: 18333,
-regtest: 18444)
-.HP
-\fB\-proxy=\fR<ip:port>
-.IP
-Connect through SOCKS5 proxy, set \fB\-noproxy\fR to disable (default:
-disabled)
-.HP
-\fB\-proxyrandomize\fR
-.IP
-Randomize credentials for every proxy connection. This enables Tor
-stream isolation (default: 1)
-.HP
-\fB\-seednode=\fR<ip>
-.IP
-Connect to a node to retrieve peer addresses, and disconnect. This
-option can be specified multiple times to connect to multiple
-nodes.
-.HP
-\fB\-timeout=\fR<n>
-.IP
-Specify connection timeout in milliseconds (minimum: 1, default: 5000)
-.HP
-\fB\-torcontrol=\fR<ip>:<port>
-.IP
-Tor control port to use if onion listening enabled (default:
-127.0.0.1:9051)
-.HP
-\fB\-torpassword=\fR<pass>
-.IP
-Tor control port password (default: empty)
-.HP
-\fB\-upnp\fR
-.IP
-Use UPnP to map the listening port (default: 0)
-.HP
-\fB\-whitebind=\fR<addr>
-.IP
-Bind to given address and whitelist peers connecting to it. Use
-[host]:port notation for IPv6
-.HP
-\fB\-whitelist=\fR<IP address or network>
-.IP
-Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or
-CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple
-times. Whitelisted peers cannot be DoS banned and their
-transactions are always relayed, even if they are already in the
-mempool, useful e.g. for a gateway
-.PP
-Wallet options:
-.HP
-\fB\-addresstype\fR
-.IP
-What type of addresses to use ("legacy", "p2sh\-segwit", or "bech32",
-default: "p2sh\-segwit")
-.HP
-\fB\-avoidpartialspends\fR
-.IP
-Group outputs by address, selecting all or none, instead of selecting on
-a per\-output basis. Privacy is improved as an address is only
-used once (unless someone sends to it after spending from it),
-but may result in slightly higher fees as suboptimal coin
-selection may result due to the added limitation (default: 0)
-.HP
-\fB\-changetype\fR
-.IP
-What type of change to use ("legacy", "p2sh\-segwit", or "bech32").
-Default is same as \fB\-addresstype\fR, except when
-\fB\-addresstype\fR=\fI\,p2sh\-segwit\/\fR a native segwit output is used when
-sending to a native segwit address)
-.HP
-\fB\-disablewallet\fR
-.IP
-Do not load the wallet and disable wallet RPC calls
-.HP
-\fB\-discardfee=\fR<amt>
-.IP
-The fee rate (in BTC/kB) that indicates your tolerance for discarding
-change by adding it to the fee (default: 0.0001). Note: An output
-is discarded if it is dust at this rate, but we will always
-discard up to the dust relay fee and a discard fee above that is
-limited by the fee estimate for the longest target
-.HP
-\fB\-fallbackfee=\fR<amt>
-.IP
-A fee rate (in BTC/kB) that will be used when fee estimation has
-insufficient data (default: 0.0002)
-.HP
-\fB\-keypool=\fR<n>
-.IP
-Set key pool size to <n> (default: 1000)
-.HP
-\fB\-mintxfee=\fR<amt>
-.IP
-Fees (in BTC/kB) smaller than this are considered zero fee for
-transaction creation (default: 0.00001)
-.HP
-\fB\-paytxfee=\fR<amt>
-.IP
-Fee (in BTC/kB) to add to transactions you send (default: 0.00)
-.HP
-\fB\-rescan\fR
-.IP
-Rescan the block chain for missing wallet transactions on startup
-.HP
-\fB\-salvagewallet\fR
-.IP
-Attempt to recover private keys from a corrupt wallet on startup
-.HP
-\fB\-spendzeroconfchange\fR
-.IP
-Spend unconfirmed change when sending transactions (default: 1)
-.HP
-\fB\-txconfirmtarget=\fR<n>
-.IP
-If paytxfee is not set, include enough fee so transactions begin
-confirmation on average within n blocks (default: 6)
-.HP
-\fB\-upgradewallet\fR
-.IP
-Upgrade wallet to latest format on startup
-.HP
-\fB\-wallet=\fR<path>
-.IP
-Specify wallet database path. Can be specified multiple times to load
-multiple wallets. Path is interpreted relative to <walletdir> if
-it is not absolute, and will be created if it does not exist (as
-a directory containing a wallet.dat file and log files). For
-backwards compatibility this will also accept names of existing
-data files in <walletdir>.)
-.HP
-\fB\-walletbroadcast\fR
-.IP
-Make the wallet broadcast transactions (default: 1)
-.HP
-\fB\-walletdir=\fR<dir>
-.IP
-Specify directory to hold wallets (default: <datadir>/wallets if it
-exists, otherwise <datadir>)
-.HP
-\fB\-walletnotify=\fR<cmd>
-.IP
-Execute command when a wallet transaction changes (%s in cmd is replaced
-by TxID)
-.HP
-\fB\-walletrbf\fR
-.IP
-Send transactions with full\-RBF opt\-in enabled (RPC only, default: 0)
-.HP
-\fB\-zapwallettxes=\fR<mode>
-.IP
-Delete all wallet transactions and only recover those parts of the
-blockchain through \fB\-rescan\fR on startup (1 = keep tx meta data e.g.
-payment request information, 2 = drop tx meta data)
-.PP
-ZeroMQ notification options:
-.HP
-\fB\-zmqpubhashblock=\fR<address>
-.IP
-Enable publish hash block in <address>
-.HP
-\fB\-zmqpubhashtx=\fR<address>
-.IP
-Enable publish hash transaction in <address>
-.HP
-\fB\-zmqpubrawblock=\fR<address>
-.IP
-Enable publish raw block in <address>
-.HP
-\fB\-zmqpubrawtx=\fR<address>
-.IP
-Enable publish raw transaction in <address>
-.PP
-Debugging/Testing options:
-.HP
-\fB\-debug=\fR<category>
-.IP
-Output debugging information (default: \fB\-nodebug\fR, supplying <category> is
-optional). If <category> is not supplied or if <category> = 1,
-output all debugging information. <category> can be: net, tor,
-mempool, http, bench, zmq, db, rpc, estimatefee, addrman,
-selectcoins, reindex, cmpctblock, rand, prune, proxy, mempoolrej,
-libevent, coindb, qt, leveldb.
-.HP
-\fB\-debugexclude=\fR<category>
-.IP
-Exclude debugging information for a category. Can be used in conjunction
-with \fB\-debug\fR=\fI\,1\/\fR to output debug logs for all categories except one
-or more specified categories.
-.HP
-\fB\-help\-debug\fR
-.IP
-Print help message with debugging options and exit
-.HP
-\fB\-logips\fR
-.IP
-Include IP addresses in debug output (default: 0)
-.HP
-\fB\-logtimestamps\fR
-.IP
-Prepend debug output with timestamp (default: 1)
-.HP
-\fB\-maxtxfee=\fR<amt>
-.IP
-Maximum total fees (in BTC) to use in a single wallet transaction or raw
-transaction; setting this too low may abort large transactions
-(default: 0.10)
-.HP
-\fB\-printtoconsole\fR
-.IP
-Send trace/debug info to console (default: 1 when no \fB\-daemon\fR. To disable
-logging to file, set \fB\-nodebuglogfile\fR)
-.HP
-\fB\-shrinkdebugfile\fR
-.IP
-Shrink debug.log file on client startup (default: 1 when no \fB\-debug\fR)
-.HP
-\fB\-uacomment=\fR<cmt>
-.IP
-Append comment to the user agent string
-.PP
-Chain selection options:
-.HP
-\fB\-testnet\fR
-.IP
-Use the test chain
-.PP
-Node relay options:
-.HP
-\fB\-bytespersigop\fR
-.IP
-Equivalent bytes per sigop in transactions for relay and mining
-(default: 20)
-.HP
-\fB\-datacarrier\fR
-.IP
-Relay and mine data carrier transactions (default: 1)
-.HP
-\fB\-datacarriersize\fR
-.IP
-Maximum size of data in data carrier transactions we relay and mine
-(default: 83)
-.HP
-.HP
-\fB\-minrelaytxfee=\fR<amt>
-.IP
-Fees (in BTC/kB) smaller than this are considered zero fee for relaying,
-mining and transaction creation (default: 0.00001)
-.HP
-\fB\-whitelistforcerelay\fR
-.IP
-Force relay of transactions from whitelisted peers even if they violate
-local relay policy (default: 0)
-.HP
-\fB\-whitelistrelay\fR
-.IP
-Accept relayed transactions received from whitelisted peers even when
-not relaying transactions (default: 1)
-.PP
-Block creation options:
-.HP
-\fB\-blockmaxweight=\fR<n>
-.IP
-Set maximum BIP141 block weight (default: 3996000)
-.HP
-\fB\-blockmintxfee=\fR<amt>
-.IP
-Set lowest fee rate (in BTC/kB) for transactions to be included in block
-creation. (default: 0.00001)
-.PP
-RPC server options:
-.HP
-\fB\-rest\fR
-.IP
-Accept public REST requests (default: 0)
-.HP
-\fB\-rpcallowip=\fR<ip>
-.IP
-Allow JSON\-RPC connections from specified source. Valid for <ip> are a
-single IP (e.g. 1.2.3.4), a network/netmask (e.g.
-1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This
-option can be specified multiple times
-.HP
-\fB\-rpcauth=\fR<userpw>
-.IP
-Username and HMAC\-SHA\-256 hashed password for JSON\-RPC connections. The
-field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
-canonical python script is included in share/rpcauth. The client
-then connects normally using the
-rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
-option can be specified multiple times
-.HP
-\fB\-rpcbind=\fR<addr>[:port]
-.IP
-Bind to given address to listen for JSON\-RPC connections. Do not expose
-the RPC server to untrusted networks such as the public internet!
-This option is ignored unless \fB\-rpcallowip\fR is also passed. Port is
-optional and overrides \fB\-rpcport\fR. Use [host]:port notation for
-IPv6. This option can be specified multiple times (default:
-127.0.0.1 and ::1 i.e., localhost)
-.HP
-\fB\-rpccookiefile=\fR<loc>
-.IP
-Location of the auth cookie. Relative paths will be prefixed by a
-net\-specific datadir location. (default: data dir)
-.HP
-\fB\-rpcpassword=\fR<pw>
-.IP
-Password for JSON\-RPC connections
-.HP
-\fB\-rpcport=\fR<port>
-.IP
-Listen for JSON\-RPC connections on <port> (default: 8332, testnet:
-18332, regtest: 18443)
-.HP
-\fB\-rpcserialversion\fR
-.IP
-Sets the serialization of raw transaction or block hex returned in
-non\-verbose mode, non\-segwit(0) or segwit(1) (default: 1)
-.HP
-\fB\-rpcthreads=\fR<n>
-.IP
-Set the number of threads to service RPC calls (default: 4)
-.HP
-\fB\-rpcuser=\fR<user>
-.IP
-Username for JSON\-RPC connections
-.HP
-\fB\-server\fR
-.IP
-Accept command line and JSON\-RPC commands
-.PP
-UI Options:
-.HP
-\fB\-choosedatadir\fR
-.IP
-Choose data directory on startup (default: 0)
-.HP
-\fB\-lang=\fR<lang>
-.IP
-Set language, for example "de_DE" (default: system locale)
-.HP
-\fB\-min\fR
-.IP
-Start minimized
-.HP
-\fB\-resetguisettings\fR
-.IP
-Reset all settings changed in the GUI
-.HP
-\fB\-rootcertificates=\fR<file>
-.IP
-Set SSL root certificates for payment request (default: \fB\-system\-\fR)
-.HP
-\fB\-splash\fR
-.IP
-Show splash screen on startup (default: 1)
-.SH COPYRIGHT
-Copyright (C) 2009-2019 The Bitcoin Core developers
+bitcoin-qt \- manual page for bitcoin-qt
 
-Please contribute if you find Bitcoin Core useful. Visit
-<https://bitcoincore.org> for further information about the software.
-The source code is available from <https://github.com/bitcoin/bitcoin>.
-
-This is experimental software.
-Distributed under the MIT software license, see the accompanying file COPYING
-or <https://opensource.org/licenses/MIT>
+This is a placefolder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
diff --git a/doc/man/bitcoin-tx.1 b/doc/man/bitcoin-tx.1
index b4c7698896..148a5890b0 100644
--- a/doc/man/bitcoin-tx.1
+++ b/doc/man/bitcoin-tx.1
@@ -1,116 +1,5 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.6.
-.TH BITCOIN-TX "1" "February 2019" "bitcoin-tx v0.17.99.0" "User Commands"
+.TH BITCOIN-TX "1"
 .SH NAME
-bitcoin-tx \- manual page for bitcoin-tx v0.17.99.0
-.SH SYNOPSIS
-.B bitcoin-tx
-[\fI\,options\/\fR] \fI\,<hex-tx> \/\fR[\fI\,commands\/\fR]  \fI\,Update hex-encoded bitcoin transaction\/\fR
-.br
-.B bitcoin-tx
-[\fI\,options\/\fR] \fI\,-create \/\fR[\fI\,commands\/\fR]   \fI\,Create hex-encoded bitcoin transaction\/\fR
-.SH DESCRIPTION
-Bitcoin Core bitcoin\-tx utility version v0.17.99.0
-.SH OPTIONS
-.HP
-\-?
-.IP
-Print this help message and exit
-.HP
-\fB\-create\fR
-.IP
-Create new, empty TX.
-.HP
-\fB\-json\fR
-.IP
-Select JSON output
-.HP
-\fB\-txid\fR
-.IP
-Output only the hex\-encoded transaction id of the resultant transaction.
-.PP
-Chain selection options:
-.HP
-\fB\-testnet\fR
-.IP
-Use the test chain
-.PP
-Commands:
-.IP
-delin=N
-.IP
-Delete input N from TX
-.IP
-delout=N
-.IP
-Delete output N from TX
-.IP
-in=TXID:VOUT(:SEQUENCE_NUMBER)
-.IP
-Add input to TX
-.IP
-locktime=N
-.IP
-Set TX lock time to N
-.IP
-nversion=N
-.IP
-Set TX version to N
-.IP
-outaddr=VALUE:ADDRESS
-.IP
-Add address\-based output to TX
-.IP
-outdata=[VALUE:]DATA
-.IP
-Add data\-based output to TX
-.IP
-outmultisig=VALUE:REQUIRED:PUBKEYS:PUBKEY1:PUBKEY2:....[:FLAGS]
-.IP
-Add Pay To n\-of\-m Multi\-sig output to TX. n = REQUIRED, m = PUBKEYS.
-Optionally add the "W" flag to produce a
-pay\-to\-witness\-script\-hash output. Optionally add the "S" flag to
-wrap the output in a pay\-to\-script\-hash.
-.IP
-outpubkey=VALUE:PUBKEY[:FLAGS]
-.IP
-Add pay\-to\-pubkey output to TX. Optionally add the "W" flag to produce a
-pay\-to\-witness\-pubkey\-hash output. Optionally add the "S" flag to
-wrap the output in a pay\-to\-script\-hash.
-.IP
-outscript=VALUE:SCRIPT[:FLAGS]
-.IP
-Add raw script output to TX. Optionally add the "W" flag to produce a
-pay\-to\-witness\-script\-hash output. Optionally add the "S" flag to
-wrap the output in a pay\-to\-script\-hash.
-.IP
-replaceable(=N)
-.IP
-Set RBF opt\-in sequence number for input N (if not provided, opt\-in all
-available inputs)
-.IP
-sign=SIGHASH\-FLAGS
-.IP
-Add zero or more signatures to transaction. This command requires JSON
-registers:prevtxs=JSON object, privatekeys=JSON object. See
-signrawtransactionwithkey docs for format of sighash flags, JSON
-objects.
-.PP
-Register Commands:
-.IP
-load=NAME:FILENAME
-.IP
-Load JSON file FILENAME into register NAME
-.IP
-set=NAME:JSON\-STRING
-.IP
-Set register NAME to given JSON\-STRING
-.SH COPYRIGHT
-Copyright (C) 2009-2019 The Bitcoin Core developers
+bitcoin-tx \- manual page for bitcoin-tx
 
-Please contribute if you find Bitcoin Core useful. Visit
-<https://bitcoincore.org> for further information about the software.
-The source code is available from <https://github.com/bitcoin/bitcoin>.
-
-This is experimental software.
-Distributed under the MIT software license, see the accompanying file COPYING
-or <https://opensource.org/licenses/MIT>
+This is a placefolder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
diff --git a/doc/man/bitcoin-wallet.1 b/doc/man/bitcoin-wallet.1
index aadea09a2b..69133b33f7 100644
--- a/doc/man/bitcoin-wallet.1
+++ b/doc/man/bitcoin-wallet.1
@@ -1,63 +1,5 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.6.
-.TH BITCOIN-WALLET "1" "February 2019" "bitcoin-wallet v0.17.99.0" "User Commands"
+.TH BITCOIN-WALLET "1"
 .SH NAME
-bitcoin-wallet \- manual page for bitcoin-wallet v0.17.99.0
-.SH DESCRIPTION
-Bitcoin Core bitcoin\-wallet version v0.17.99.0
-.PP
-wallet\-tool is an offline tool for creating and interacting with Bitcoin Core wallet files.
-By default wallet\-tool will act on wallets in the default mainnet wallet directory in the datadir.
-To change the target wallet, use the \fB\-datadir\fR, \fB\-wallet\fR and \fB\-testnet\fR/\-regtest arguments.
-.SS "Usage:"
-.IP
-bitcoin\-wallet [options] <command>
-.SH OPTIONS
-.HP
-\-?
-.IP
-Print this help message and exit
-.HP
-\fB\-datadir=\fR<dir>
-.IP
-Specify data directory
-.HP
-\fB\-wallet=\fR<wallet\-name>
-.IP
-Specify wallet name
-.PP
-Debugging/Testing options:
-.HP
-\fB\-debug=\fR<category>
-.IP
-Output debugging information (default: 0).
-.HP
-\fB\-printtoconsole\fR
-.IP
-Send trace/debug info to console (default: 1 when no \fB\-debug\fR is true, 0
-otherwise.
-.PP
-Chain selection options:
-.HP
-\fB\-testnet\fR
-.IP
-Use the test chain
-.PP
-Commands:
-.IP
-create
-.IP
-Create new wallet file
-.IP
-info
-.IP
-Get wallet info
-.SH COPYRIGHT
-Copyright (C) 2009-2019 The Bitcoin Core developers
+bitcoin-wallet \- manual page for bitcoin-wallet
 
-Please contribute if you find Bitcoin Core useful. Visit
-<https://bitcoincore.org> for further information about the software.
-The source code is available from <https://github.com/bitcoin/bitcoin>.
-
-This is experimental software.
-Distributed under the MIT software license, see the accompanying file COPYING
-or <https://opensource.org/licenses/MIT>
+This is a placefolder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
diff --git a/doc/man/bitcoind.1 b/doc/man/bitcoind.1
index 211ba10285..de338182ff 100644
--- a/doc/man/bitcoind.1
+++ b/doc/man/bitcoind.1
@@ -1,583 +1,5 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.6.
-.TH BITCOIND "1" "February 2019" "bitcoind v0.17.99.0" "User Commands"
+.TH BITCOIND "1"
 .SH NAME
-bitcoind \- manual page for bitcoind v0.17.99.0
-.SH SYNOPSIS
-.B bitcoind
-[\fI\,options\/\fR]                     \fI\,Start Bitcoin Core Daemon\/\fR
-.SH DESCRIPTION
-Bitcoin Core Daemon version v0.17.99.0
-.SH OPTIONS
-.HP
-\-?
-.IP
-Print this help message and exit
-.HP
-\fB\-alertnotify=\fR<cmd>
-.IP
-Execute command when a relevant alert is received or we see a really
-long fork (%s in cmd is replaced by message)
-.HP
-\fB\-assumevalid=\fR<hex>
-.IP
-If this block is in the chain assume that it and its ancestors are valid
-and potentially skip their script verification (0 to verify all,
-default:
-0000000000000000002e63058c023a9a1de233554f28c7b21380b6c9003f36a8,
-testnet:
-0000000000000037a8cd3e06cd5edbfe9dd1dbcc5dacab279376ef7cfc2b4c75)
-.HP
-\fB\-blocknotify=\fR<cmd>
-.IP
-Execute command when the best block changes (%s in cmd is replaced by
-block hash)
-.HP
-\fB\-blockreconstructionextratxn=\fR<n>
-.IP
-Extra transactions to keep in memory for compact block reconstructions
-(default: 100)
-.HP
-\fB\-blocksdir=\fR<dir>
-.IP
-Specify blocks directory (default: <datadir>/blocks)
-.HP
-\fB\-conf=\fR<file>
-.IP
-Specify configuration file. Relative paths will be prefixed by datadir
-location. (default: bitcoin.conf)
-.HP
-\fB\-daemon\fR
-.IP
-Run in the background as a daemon and accept commands
-.HP
-\fB\-datadir=\fR<dir>
-.IP
-Specify data directory
-.HP
-\fB\-dbcache=\fR<n>
-.IP
-Set database cache size in MiB (4 to 16384, default: 450)
-.HP
-\fB\-debuglogfile=\fR<file>
-.IP
-Specify location of debug log file. Relative paths will be prefixed by a
-net\-specific datadir location. (\fB\-nodebuglogfile\fR to disable;
-default: debug.log)
-.HP
-\fB\-includeconf=\fR<file>
-.IP
-Specify additional configuration file, relative to the \fB\-datadir\fR path
-(only useable from configuration file, not command line)
-.HP
-\fB\-loadblock=\fR<file>
-.IP
-Imports blocks from external blk000??.dat file on startup
-.HP
-\fB\-maxmempool=\fR<n>
-.IP
-Keep the transaction memory pool below <n> megabytes (default: 300)
-.HP
-\fB\-maxorphantx=\fR<n>
-.IP
-Keep at most <n> unconnectable transactions in memory (default: 100)
-.HP
-\fB\-mempoolexpiry=\fR<n>
-.IP
-Do not keep transactions in the mempool longer than <n> hours (default:
-336)
-.HP
-\fB\-par=\fR<n>
-.IP
-Set the number of script verification threads (\fB\-8\fR to 16, 0 = auto, <0 =
-leave that many cores free, default: 0)
-.HP
-\fB\-persistmempool\fR
-.IP
-Whether to save the mempool on shutdown and load on restart (default: 1)
-.HP
-\fB\-pid=\fR<file>
-.IP
-Specify pid file. Relative paths will be prefixed by a net\-specific
-datadir location. (default: bitcoind.pid)
-.HP
-\fB\-prune=\fR<n>
-.IP
-Reduce storage requirements by enabling pruning (deleting) of old
-blocks. This allows the pruneblockchain RPC to be called to
-delete specific blocks, and enables automatic pruning of old
-blocks if a target size in MiB is provided. This mode is
-incompatible with \fB\-txindex\fR and \fB\-rescan\fR. Warning: Reverting this
-setting requires re\-downloading the entire blockchain. (default:
-0 = disable pruning blocks, 1 = allow manual pruning via RPC,
->=550 = automatically prune block files to stay under the
-specified target size in MiB)
-.HP
-\fB\-reindex\fR
-.IP
-Rebuild chain state and block index from the blk*.dat files on disk
-.HP
-\fB\-reindex\-chainstate\fR
-.IP
-Rebuild chain state from the currently indexed blocks. When in pruning
-mode or if blocks on disk might be corrupted, use full \fB\-reindex\fR
-instead.
-.HP
-\fB\-sysperms\fR
-.IP
-Create new files with system default permissions, instead of umask 077
-(only effective with disabled wallet functionality)
-.HP
-\fB\-txindex\fR
-.IP
-Maintain a full transaction index, used by the getrawtransaction rpc
-call (default: 0)
-.HP
-\fB\-version\fR
-.IP
-Print version and exit
-.PP
-Connection options:
-.HP
-\fB\-addnode=\fR<ip>
-.IP
-Add a node to connect to and attempt to keep the connection open (see
-the `addnode` RPC command help for more info). This option can be
-specified multiple times to add multiple nodes.
-.HP
-\fB\-banscore=\fR<n>
-.IP
-Threshold for disconnecting misbehaving peers (default: 100)
-.HP
-\fB\-bantime=\fR<n>
-.IP
-Number of seconds to keep misbehaving peers from reconnecting (default:
-86400)
-.HP
-\fB\-bind=\fR<addr>
-.IP
-Bind to given address and always listen on it. Use [host]:port notation
-for IPv6
-.HP
-\fB\-connect=\fR<ip>
-.IP
-Connect only to the specified node; \fB\-noconnect\fR disables automatic
-connections (the rules for this peer are the same as for
-\fB\-addnode\fR). This option can be specified multiple times to connect
-to multiple nodes.
-.HP
-\fB\-discover\fR
-.IP
-Discover own IP addresses (default: 1 when listening and no \fB\-externalip\fR
-or \fB\-proxy\fR)
-.HP
-\fB\-dns\fR
-.IP
-Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (default: 1)
-.HP
-\fB\-dnsseed\fR
-.IP
-Query for peer addresses via DNS lookup, if low on addresses (default: 1
-unless \fB\-connect\fR used)
-.HP
-\fB\-externalip=\fR<ip>
-.IP
-Specify your own public address
-.HP
-\fB\-forcednsseed\fR
-.IP
-Always query for peer addresses via DNS lookup (default: 0)
-.HP
-\fB\-listen\fR
-.IP
-Accept connections from outside (default: 1 if no \fB\-proxy\fR or \fB\-connect\fR)
-.HP
-\fB\-listenonion\fR
-.IP
-Automatically create Tor hidden service (default: 1)
-.HP
-\fB\-maxconnections=\fR<n>
-.IP
-Maintain at most <n> connections to peers (default: 125)
-.HP
-\fB\-maxreceivebuffer=\fR<n>
-.IP
-Maximum per\-connection receive buffer, <n>*1000 bytes (default: 5000)
-.HP
-\fB\-maxsendbuffer=\fR<n>
-.IP
-Maximum per\-connection send buffer, <n>*1000 bytes (default: 1000)
-.HP
-\fB\-maxtimeadjustment\fR
-.IP
-Maximum allowed median peer time offset adjustment. Local perspective of
-time may be influenced by peers forward or backward by this
-amount. (default: 4200 seconds)
-.HP
-\fB\-maxuploadtarget=\fR<n>
-.IP
-Tries to keep outbound traffic under the given target (in MiB per 24h),
-0 = no limit (default: 0)
-.HP
-\fB\-onion=\fR<ip:port>
-.IP
-Use separate SOCKS5 proxy to reach peers via Tor hidden services, set
-\fB\-noonion\fR to disable (default: \fB\-proxy\fR)
-.HP
-\fB\-onlynet=\fR<net>
-.IP
-Make outgoing connections only through network <net> (ipv4, ipv6 or
-onion). Incoming connections are not affected by this option.
-This option can be specified multiple times to allow multiple
-networks.
-.HP
-\fB\-peerbloomfilters\fR
-.IP
-Support filtering of blocks and transaction with bloom filters (default:
-1)
-.HP
-\fB\-permitbaremultisig\fR
-.IP
-Relay non\-P2SH multisig (default: 1)
-.HP
-\fB\-port=\fR<port>
-.IP
-Listen for connections on <port> (default: 8333, testnet: 18333,
-regtest: 18444)
-.HP
-\fB\-proxy=\fR<ip:port>
-.IP
-Connect through SOCKS5 proxy, set \fB\-noproxy\fR to disable (default:
-disabled)
-.HP
-\fB\-proxyrandomize\fR
-.IP
-Randomize credentials for every proxy connection. This enables Tor
-stream isolation (default: 1)
-.HP
-\fB\-seednode=\fR<ip>
-.IP
-Connect to a node to retrieve peer addresses, and disconnect. This
-option can be specified multiple times to connect to multiple
-nodes.
-.HP
-\fB\-timeout=\fR<n>
-.IP
-Specify connection timeout in milliseconds (minimum: 1, default: 5000)
-.HP
-\fB\-torcontrol=\fR<ip>:<port>
-.IP
-Tor control port to use if onion listening enabled (default:
-127.0.0.1:9051)
-.HP
-\fB\-torpassword=\fR<pass>
-.IP
-Tor control port password (default: empty)
-.HP
-\fB\-upnp\fR
-.IP
-Use UPnP to map the listening port (default: 0)
-.HP
-\fB\-whitebind=\fR<addr>
-.IP
-Bind to given address and whitelist peers connecting to it. Use
-[host]:port notation for IPv6
-.HP
-\fB\-whitelist=\fR<IP address or network>
-.IP
-Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or
-CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple
-times. Whitelisted peers cannot be DoS banned and their
-transactions are always relayed, even if they are already in the
-mempool, useful e.g. for a gateway
-.PP
-Wallet options:
-.HP
-\fB\-addresstype\fR
-.IP
-What type of addresses to use ("legacy", "p2sh\-segwit", or "bech32",
-default: "p2sh\-segwit")
-.HP
-\fB\-avoidpartialspends\fR
-.IP
-Group outputs by address, selecting all or none, instead of selecting on
-a per\-output basis. Privacy is improved as an address is only
-used once (unless someone sends to it after spending from it),
-but may result in slightly higher fees as suboptimal coin
-selection may result due to the added limitation (default: 0)
-.HP
-\fB\-changetype\fR
-.IP
-What type of change to use ("legacy", "p2sh\-segwit", or "bech32").
-Default is same as \fB\-addresstype\fR, except when
-\fB\-addresstype\fR=\fI\,p2sh\-segwit\/\fR a native segwit output is used when
-sending to a native segwit address)
-.HP
-\fB\-disablewallet\fR
-.IP
-Do not load the wallet and disable wallet RPC calls
-.HP
-\fB\-discardfee=\fR<amt>
-.IP
-The fee rate (in BTC/kB) that indicates your tolerance for discarding
-change by adding it to the fee (default: 0.0001). Note: An output
-is discarded if it is dust at this rate, but we will always
-discard up to the dust relay fee and a discard fee above that is
-limited by the fee estimate for the longest target
-.HP
-\fB\-fallbackfee=\fR<amt>
-.IP
-A fee rate (in BTC/kB) that will be used when fee estimation has
-insufficient data (default: 0.0002)
-.HP
-\fB\-keypool=\fR<n>
-.IP
-Set key pool size to <n> (default: 1000)
-.HP
-\fB\-mintxfee=\fR<amt>
-.IP
-Fees (in BTC/kB) smaller than this are considered zero fee for
-transaction creation (default: 0.00001)
-.HP
-\fB\-paytxfee=\fR<amt>
-.IP
-Fee (in BTC/kB) to add to transactions you send (default: 0.00)
-.HP
-\fB\-rescan\fR
-.IP
-Rescan the block chain for missing wallet transactions on startup
-.HP
-\fB\-salvagewallet\fR
-.IP
-Attempt to recover private keys from a corrupt wallet on startup
-.HP
-\fB\-spendzeroconfchange\fR
-.IP
-Spend unconfirmed change when sending transactions (default: 1)
-.HP
-\fB\-txconfirmtarget=\fR<n>
-.IP
-If paytxfee is not set, include enough fee so transactions begin
-confirmation on average within n blocks (default: 6)
-.HP
-\fB\-upgradewallet\fR
-.IP
-Upgrade wallet to latest format on startup
-.HP
-\fB\-wallet=\fR<path>
-.IP
-Specify wallet database path. Can be specified multiple times to load
-multiple wallets. Path is interpreted relative to <walletdir> if
-it is not absolute, and will be created if it does not exist (as
-a directory containing a wallet.dat file and log files). For
-backwards compatibility this will also accept names of existing
-data files in <walletdir>.)
-.HP
-\fB\-walletbroadcast\fR
-.IP
-Make the wallet broadcast transactions (default: 1)
-.HP
-\fB\-walletdir=\fR<dir>
-.IP
-Specify directory to hold wallets (default: <datadir>/wallets if it
-exists, otherwise <datadir>)
-.HP
-\fB\-walletnotify=\fR<cmd>
-.IP
-Execute command when a wallet transaction changes (%s in cmd is replaced
-by TxID)
-.HP
-\fB\-walletrbf\fR
-.IP
-Send transactions with full\-RBF opt\-in enabled (RPC only, default: 0)
-.HP
-\fB\-zapwallettxes=\fR<mode>
-.IP
-Delete all wallet transactions and only recover those parts of the
-blockchain through \fB\-rescan\fR on startup (1 = keep tx meta data e.g.
-payment request information, 2 = drop tx meta data)
-.PP
-ZeroMQ notification options:
-.HP
-\fB\-zmqpubhashblock=\fR<address>
-.IP
-Enable publish hash block in <address>
-.HP
-\fB\-zmqpubhashtx=\fR<address>
-.IP
-Enable publish hash transaction in <address>
-.HP
-\fB\-zmqpubrawblock=\fR<address>
-.IP
-Enable publish raw block in <address>
-.HP
-\fB\-zmqpubrawtx=\fR<address>
-.IP
-Enable publish raw transaction in <address>
-.PP
-Debugging/Testing options:
-.HP
-\fB\-debug=\fR<category>
-.IP
-Output debugging information (default: \fB\-nodebug\fR, supplying <category> is
-optional). If <category> is not supplied or if <category> = 1,
-output all debugging information. <category> can be: net, tor,
-mempool, http, bench, zmq, db, rpc, estimatefee, addrman,
-selectcoins, reindex, cmpctblock, rand, prune, proxy, mempoolrej,
-libevent, coindb, qt, leveldb.
-.HP
-\fB\-debugexclude=\fR<category>
-.IP
-Exclude debugging information for a category. Can be used in conjunction
-with \fB\-debug\fR=\fI\,1\/\fR to output debug logs for all categories except one
-or more specified categories.
-.HP
-\fB\-help\-debug\fR
-.IP
-Print help message with debugging options and exit
-.HP
-\fB\-logips\fR
-.IP
-Include IP addresses in debug output (default: 0)
-.HP
-\fB\-logtimestamps\fR
-.IP
-Prepend debug output with timestamp (default: 1)
-.HP
-\fB\-maxtxfee=\fR<amt>
-.IP
-Maximum total fees (in BTC) to use in a single wallet transaction or raw
-transaction; setting this too low may abort large transactions
-(default: 0.10)
-.HP
-\fB\-printtoconsole\fR
-.IP
-Send trace/debug info to console (default: 1 when no \fB\-daemon\fR. To disable
-logging to file, set \fB\-nodebuglogfile\fR)
-.HP
-\fB\-shrinkdebugfile\fR
-.IP
-Shrink debug.log file on client startup (default: 1 when no \fB\-debug\fR)
-.HP
-\fB\-uacomment=\fR<cmt>
-.IP
-Append comment to the user agent string
-.PP
-Chain selection options:
-.HP
-\fB\-testnet\fR
-.IP
-Use the test chain
-.PP
-Node relay options:
-.HP
-\fB\-bytespersigop\fR
-.IP
-Equivalent bytes per sigop in transactions for relay and mining
-(default: 20)
-.HP
-\fB\-datacarrier\fR
-.IP
-Relay and mine data carrier transactions (default: 1)
-.HP
-\fB\-datacarriersize\fR
-.IP
-Maximum size of data in data carrier transactions we relay and mine
-(default: 83)
-.HP
-\fB\-minrelaytxfee=\fR<amt>
-.IP
-Fees (in BTC/kB) smaller than this are considered zero fee for relaying,
-mining and transaction creation (default: 0.00001)
-.HP
-\fB\-whitelistforcerelay\fR
-.IP
-Force relay of transactions from whitelisted peers even if they violate
-local relay policy (default: 0)
-.HP
-\fB\-whitelistrelay\fR
-.IP
-Accept relayed transactions received from whitelisted peers even when
-not relaying transactions (default: 1)
-.PP
-Block creation options:
-.HP
-\fB\-blockmaxweight=\fR<n>
-.IP
-Set maximum BIP141 block weight (default: 3996000)
-.HP
-\fB\-blockmintxfee=\fR<amt>
-.IP
-Set lowest fee rate (in BTC/kB) for transactions to be included in block
-creation. (default: 0.00001)
-.PP
-RPC server options:
-.HP
-\fB\-rest\fR
-.IP
-Accept public REST requests (default: 0)
-.HP
-\fB\-rpcallowip=\fR<ip>
-.IP
-Allow JSON\-RPC connections from specified source. Valid for <ip> are a
-single IP (e.g. 1.2.3.4), a network/netmask (e.g.
-1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This
-option can be specified multiple times
-.HP
-\fB\-rpcauth=\fR<userpw>
-.IP
-Username and HMAC\-SHA\-256 hashed password for JSON\-RPC connections. The
-field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
-canonical python script is included in share/rpcauth. The client
-then connects normally using the
-rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
-option can be specified multiple times
-.HP
-\fB\-rpcbind=\fR<addr>[:port]
-.IP
-Bind to given address to listen for JSON\-RPC connections. Do not expose
-the RPC server to untrusted networks such as the public internet!
-This option is ignored unless \fB\-rpcallowip\fR is also passed. Port is
-optional and overrides \fB\-rpcport\fR. Use [host]:port notation for
-IPv6. This option can be specified multiple times (default:
-127.0.0.1 and ::1 i.e., localhost)
-.HP
-\fB\-rpccookiefile=\fR<loc>
-.IP
-Location of the auth cookie. Relative paths will be prefixed by a
-net\-specific datadir location. (default: data dir)
-.HP
-\fB\-rpcpassword=\fR<pw>
-.IP
-Password for JSON\-RPC connections
-.HP
-\fB\-rpcport=\fR<port>
-.IP
-Listen for JSON\-RPC connections on <port> (default: 8332, testnet:
-18332, regtest: 18443)
-.HP
-\fB\-rpcserialversion\fR
-.IP
-Sets the serialization of raw transaction or block hex returned in
-non\-verbose mode, non\-segwit(0) or segwit(1) (default: 1)
-.HP
-\fB\-rpcthreads=\fR<n>
-.IP
-Set the number of threads to service RPC calls (default: 4)
-.HP
-\fB\-rpcuser=\fR<user>
-.IP
-Username for JSON\-RPC connections
-.HP
-\fB\-server\fR
-.IP
-Accept command line and JSON\-RPC commands
-.SH COPYRIGHT
-Copyright (C) 2009-2019 The Bitcoin Core developers
+bitcoind \- manual page for bitcoind
 
-Please contribute if you find Bitcoin Core useful. Visit
-<https://bitcoincore.org> for further information about the software.
-The source code is available from <https://github.com/bitcoin/bitcoin>.
-
-This is experimental software.
-Distributed under the MIT software license, see the accompanying file COPYING
-or <https://opensource.org/licenses/MIT>
+This is a placefolder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.