6 files changed, 2122 insertions, 18 deletions

diff --git a/doc/man/bitcoin-cli.1 b/doc/man/bitcoin-cli.1
index 6bcad7006b..5c226100bf 100644
--- a/doc/man/bitcoin-cli.1
+++ b/doc/man/bitcoin-cli.1
@@ -1,5 +1,181 @@
-.TH BITCOIN-CLI "1"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
+.TH BITCOIN-CLI "1" "October 2023" "bitcoin-cli v26.0.0rc1" "User Commands"
 .SH NAME
-bitcoin-cli \- manual page for bitcoin-cli
+bitcoin-cli \- manual page for bitcoin-cli v26.0.0rc1
+.SH SYNOPSIS
+.B bitcoin-cli
+[\fI\,options\/\fR] \fI\,<command> \/\fR[\fI\,params\/\fR]  \fI\,Send command to Bitcoin Core\/\fR
+.br
+.B bitcoin-cli
+[\fI\,options\/\fR] \fI\,-named <command> \/\fR[\fI\,name=value\/\fR]...  \fI\,Send command to Bitcoin Core (with named arguments)\/\fR
+.br
+.B bitcoin-cli
+[\fI\,options\/\fR] \fI\,help                List commands\/\fR
+.br
+.B bitcoin-cli
+[\fI\,options\/\fR] \fI\,help <command>      Get help for a command\/\fR
+.SH DESCRIPTION
+Bitcoin Core RPC client version v26.0.0rc1
+.SH OPTIONS
+.HP
+\-?
+.IP
+Print this help message and exit
+.HP
+\fB\-addrinfo\fR
+.IP
+Get the number of addresses known to the node, per network and total,
+after filtering for quality and recency. The total number of
+addresses known to the node may be higher.
+.HP
+\fB\-color=\fR<when>
+.IP
+Color setting for CLI output (default: auto). Valid values: always, auto
+(add color codes when standard output is connected to a terminal
+and OS is not WIN32), never.
+.HP
+\fB\-conf=\fR<file>
+.IP
+Specify configuration file. Relative paths will be prefixed by datadir
+location. (default: bitcoin.conf)
+.HP
+\fB\-datadir=\fR<dir>
+.IP
+Specify data directory
+.HP
+\fB\-generate\fR
+.IP
+Generate blocks, equivalent to RPC getnewaddress followed by RPC
+generatetoaddress. Optional positional integer arguments are
+number of blocks to generate (default: 1) and maximum iterations
+to try (default: 1000000), equivalent to RPC generatetoaddress
+nblocks and maxtries arguments. Example: bitcoin\-cli \fB\-generate\fR 4
+1000
+.HP
+\fB\-getinfo\fR
+.IP
+Get general information from the remote server. Note that unlike
+server\-side RPC calls, the output of \fB\-getinfo\fR is the result of
+multiple non\-atomic requests. Some entries in the output may
+represent results from different states (e.g. wallet balance may
+be as of a different block from the chain state reported)
+.HP
+\fB\-named\fR
+.IP
+Pass named instead of positional arguments (default: false)
+.HP
+\fB\-netinfo\fR
+.IP
+Get network peer connection information from the remote server. An
+optional integer argument from 0 to 4 can be passed for different
+peers listings (default: 0). Pass "help" for detailed help
+documentation.
+.HP
+\fB\-rpcclienttimeout=\fR<n>
+.IP
+Timeout in seconds during HTTP requests, or 0 for no timeout. (default:
+900)
+.HP
+\fB\-rpcconnect=\fR<ip>
+.IP
+Send commands to node running on <ip> (default: 127.0.0.1)
+.HP
+\fB\-rpccookiefile=\fR<loc>
+.IP
+Location of the auth cookie. Relative paths will be prefixed by a
+net\-specific datadir location. (default: data dir)
+.HP
+\fB\-rpcpassword=\fR<pw>
+.IP
+Password for JSON\-RPC connections
+.HP
+\fB\-rpcport=\fR<port>
+.IP
+Connect to JSON\-RPC on <port> (default: 8332, testnet: 18332, signet:
+38332, regtest: 18443)
+.HP
+\fB\-rpcuser=\fR<user>
+.IP
+Username for JSON\-RPC connections
+.HP
+\fB\-rpcwait\fR
+.IP
+Wait for RPC server to start
+.HP
+\fB\-rpcwaittimeout=\fR<n>
+.IP
+Timeout in seconds to wait for the RPC server to start, or 0 for no
+timeout. (default: 0)
+.HP
+\fB\-rpcwallet=\fR<walletname>
+.IP
+Send RPC for non\-default wallet on RPC server (needs to exactly match
+corresponding \fB\-wallet\fR option passed to bitcoind). This changes
+the RPC endpoint used, e.g.
+http://127.0.0.1:8332/wallet/<walletname>
+.HP
+\fB\-stdin\fR
+.IP
+Read extra arguments from standard input, one per line until EOF/Ctrl\-D
+(recommended for sensitive information such as passphrases). When
+combined with \fB\-stdinrpcpass\fR, the first line from standard input
+is used for the RPC password.
+.HP
+\fB\-stdinrpcpass\fR
+.IP
+Read RPC password from standard input as a single line. When combined
+with \fB\-stdin\fR, the first line from standard input is used for the
+RPC password. When combined with \fB\-stdinwalletpassphrase\fR,
+\fB\-stdinrpcpass\fR consumes the first line, and \fB\-stdinwalletpassphrase\fR
+consumes the second.
+.HP
+\fB\-stdinwalletpassphrase\fR
+.IP
+Read wallet passphrase from standard input as a single line. When
+combined with \fB\-stdin\fR, the first line from standard input is used
+for the wallet passphrase.
+.HP
+\fB\-version\fR
+.IP
+Print version and exit
+.PP
+Debugging/Testing options:
+.PP
+Chain selection options:
+.HP
+\fB\-chain=\fR<chain>
+.IP
+Use the chain <chain> (default: main). Allowed values: main, test,
+signet, regtest
+.HP
+\fB\-signet\fR
+.IP
+Use the signet chain. Equivalent to \fB\-chain\fR=\fI\,signet\/\fR. Note that the network
+is defined by the \fB\-signetchallenge\fR parameter
+.HP
+\fB\-signetchallenge\fR
+.IP
+Blocks must satisfy the given script to be considered valid (only for
+signet networks; defaults to the global default signet test
+network challenge)
+.HP
+\fB\-signetseednode\fR
+.IP
+Specify a seed node for the signet network, in the hostname[:port]
+format, e.g. sig.net:1234 (may be used multiple times to specify
+multiple seed nodes; defaults to the global default signet test
+network seed node(s))
+.HP
+\fB\-testnet\fR
+.IP
+Use the test chain. Equivalent to \fB\-chain\fR=\fI\,test\/\fR.
+.SH COPYRIGHT
+Copyright (C) 2009-2023 The Bitcoin Core developers
 
-This is a placeholder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
+Please contribute if you find Bitcoin Core useful. Visit
+<https://bitcoincore.org/> for further information about the software.
+The source code is available from <https://github.com/bitcoin/bitcoin>.
+
+This is experimental software.
+Distributed under the MIT software license, see the accompanying file COPYING
+or <https://opensource.org/licenses/MIT>
\ No newline at end of file
diff --git a/doc/man/bitcoin-qt.1 b/doc/man/bitcoin-qt.1
index ff4d1d2c7a..b6b081a31e 100644
--- a/doc/man/bitcoin-qt.1
+++ b/doc/man/bitcoin-qt.1
@@ -1,5 +1,822 @@
-.TH BITCOIN-QT "1"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
+.TH BITCOIN-QT "1" "October 2023" "bitcoin-qt v26.0.0rc1" "User Commands"
 .SH NAME
-bitcoin-qt \- manual page for bitcoin-qt
+bitcoin-qt \- manual page for bitcoin-qt v26.0.0rc1
+.SH SYNOPSIS
+.B bitcoin-qt
+[\fI\,command-line options\/\fR]
+.SH DESCRIPTION
+Bitcoin Core version v26.0.0rc1
+.SH OPTIONS
+.HP
+\-?
+.IP
+Print this help message and exit
+.HP
+\fB\-alertnotify=\fR<cmd>
+.IP
+Execute command when an alert is raised (%s in cmd is replaced by
+message)
+.HP
+\fB\-allowignoredconf\fR
+.IP
+For backwards compatibility, treat an unused bitcoin.conf file in the
+datadir as a warning, not an error.
+.HP
+\fB\-assumevalid=\fR<hex>
+.IP
+If this block is in the chain assume that it and its ancestors are valid
+and potentially skip their script verification (0 to verify all,
+default:
+00000000000000000001a0a448d6cf2546b06801389cc030b2b18c6491266815,
+testnet:
+0000000000000093bcb68c03a9a168ae252572d348a2eaeba2cdf9231d73206f,
+signet:
+0000013d778ba3f914530f11f6b69869c9fab54acff85acd7b8201d111f19b7f)
+.HP
+\fB\-blockfilterindex=\fR<type>
+.IP
+Maintain an index of compact filters by block (default: 0, values:
+basic). If <type> is not supplied or if <type> = 1, indexes for
+all known types are enabled.
+.HP
+\fB\-blocknotify=\fR<cmd>
+.IP
+Execute command when the best block changes (%s in cmd is replaced by
+block hash)
+.HP
+\fB\-blockreconstructionextratxn=\fR<n>
+.IP
+Extra transactions to keep in memory for compact block reconstructions
+(default: 100)
+.HP
+\fB\-blocksdir=\fR<dir>
+.IP
+Specify directory to hold blocks subdirectory for *.dat files (default:
+<datadir>)
+.HP
+\fB\-blocksonly\fR
+.IP
+Whether to reject transactions from network peers. Automatic broadcast
+and rebroadcast of any transactions from inbound peers is
+disabled, unless the peer has the 'forcerelay' permission. RPC
+transactions are not affected. (default: 0)
+.HP
+\fB\-coinstatsindex\fR
+.IP
+Maintain coinstats index used by the gettxoutsetinfo RPC (default: 0)
+.HP
+\fB\-conf=\fR<file>
+.IP
+Specify path to read\-only configuration file. Relative paths will be
+prefixed by datadir location (only useable from command line, not
+configuration file) (default: bitcoin.conf)
+.HP
+\fB\-daemon\fR
+.IP
+Run in the background as a daemon and accept commands (default: 0)
+.HP
+\fB\-daemonwait\fR
+.IP
+Wait for initialization to be finished before exiting. This implies
+\fB\-daemon\fR (default: 0)
+.HP
+\fB\-datadir=\fR<dir>
+.IP
+Specify data directory
+.HP
+\fB\-dbcache=\fR<n>
+.IP
+Maximum database cache size <n> MiB (4 to 16384, default: 450). In
+addition, unused mempool memory is shared for this cache (see
+\fB\-maxmempool\fR).
+.HP
+\fB\-debuglogfile=\fR<file>
+.IP
+Specify location of debug log file (default: debug.log). Relative paths
+will be prefixed by a net\-specific datadir location. Pass
+\fB\-nodebuglogfile\fR to disable writing the log to a file.
+.HP
+\fB\-includeconf=\fR<file>
+.IP
+Specify additional configuration file, relative to the \fB\-datadir\fR path
+(only useable from configuration file, not command line)
+.HP
+\fB\-loadblock=\fR<file>
+.IP
+Imports blocks from external file on startup
+.HP
+\fB\-maxmempool=\fR<n>
+.IP
+Keep the transaction memory pool below <n> megabytes (default: 300)
+.HP
+\fB\-maxorphantx=\fR<n>
+.IP
+Keep at most <n> unconnectable transactions in memory (default: 100)
+.HP
+\fB\-mempoolexpiry=\fR<n>
+.IP
+Do not keep transactions in the mempool longer than <n> hours (default:
+336)
+.HP
+\fB\-par=\fR<n>
+.IP
+Set the number of script verification threads (\fB\-10\fR to 15, 0 = auto, <0 =
+leave that many cores free, default: 0)
+.HP
+\fB\-persistmempool\fR
+.IP
+Whether to save the mempool on shutdown and load on restart (default: 1)
+.HP
+\fB\-pid=\fR<file>
+.IP
+Specify pid file. Relative paths will be prefixed by a net\-specific
+datadir location. (default: bitcoind.pid)
+.HP
+\fB\-prune=\fR<n>
+.IP
+Reduce storage requirements by enabling pruning (deleting) of old
+blocks. This allows the pruneblockchain RPC to be called to
+delete specific blocks and enables automatic pruning of old
+blocks if a target size in MiB is provided. This mode is
+incompatible with \fB\-txindex\fR. Warning: Reverting this setting
+requires re\-downloading the entire blockchain. (default: 0 =
+disable pruning blocks, 1 = allow manual pruning via RPC, >=550 =
+automatically prune block files to stay under the specified
+target size in MiB)
+.HP
+\fB\-reindex\fR
+.IP
+If enabled, wipe chain state and block index, and rebuild them from
+blk*.dat files on disk. Also wipe and rebuild other optional
+indexes that are active. If an assumeutxo snapshot was loaded,
+its chainstate will be wiped as well. The snapshot can then be
+reloaded via RPC.
+.HP
+\fB\-reindex\-chainstate\fR
+.IP
+If enabled, wipe chain state, and rebuild it from blk*.dat files on
+disk. If an assumeutxo snapshot was loaded, its chainstate will
+be wiped as well. The snapshot can then be reloaded via RPC.
+.HP
+\fB\-settings=\fR<file>
+.IP
+Specify path to dynamic settings data file. Can be disabled with
+\fB\-nosettings\fR. File is written at runtime and not meant to be
+edited by users (use bitcoin.conf instead for custom settings).
+Relative paths will be prefixed by datadir location. (default:
+settings.json)
+.HP
+\fB\-shutdownnotify=\fR<cmd>
+.IP
+Execute command immediately before beginning shutdown. The need for
+shutdown may be urgent, so be careful not to delay it long (if
+the command doesn't require interaction with the server, consider
+having it fork into the background).
+.HP
+\fB\-startupnotify=\fR<cmd>
+.IP
+Execute command on startup.
+.HP
+\fB\-txindex\fR
+.IP
+Maintain a full transaction index, used by the getrawtransaction rpc
+call (default: 0)
+.HP
+\fB\-version\fR
+.IP
+Print version and exit
+.PP
+Connection options:
+.HP
+\fB\-addnode=\fR<ip>
+.IP
+Add a node to connect to and attempt to keep the connection open (see
+the addnode RPC help for more info). This option can be specified
+multiple times to add multiple nodes; connections are limited to
+8 at a time and are counted separately from the \fB\-maxconnections\fR
+limit.
+.HP
+\fB\-asmap=\fR<file>
+.IP
+Specify asn mapping used for bucketing of the peers (default:
+ip_asn.map). Relative paths will be prefixed by the net\-specific
+datadir location.
+.HP
+\fB\-bantime=\fR<n>
+.IP
+Default duration (in seconds) of manually configured bans (default:
+86400)
+.HP
+\fB\-bind=\fR<addr>[:<port>][=onion]
+.IP
+Bind to given address and always listen on it (default: 0.0.0.0). Use
+[host]:port notation for IPv6. Append =onion to tag any incoming
+connections to that address and port as incoming Tor connections
+(default: 127.0.0.1:8334=onion, testnet: 127.0.0.1:18334=onion,
+signet: 127.0.0.1:38334=onion, regtest: 127.0.0.1:18445=onion)
+.HP
+\fB\-cjdnsreachable\fR
+.IP
+If set, then this host is configured for CJDNS (connecting to fc00::/8
+addresses would lead us to the CJDNS network, see doc/cjdns.md)
+(default: 0)
+.HP
+\fB\-connect=\fR<ip>
+.IP
+Connect only to the specified node; \fB\-noconnect\fR disables automatic
+connections (the rules for this peer are the same as for
+\fB\-addnode\fR). This option can be specified multiple times to connect
+to multiple nodes.
+.HP
+\fB\-discover\fR
+.IP
+Discover own IP addresses (default: 1 when listening and no \fB\-externalip\fR
+or \fB\-proxy\fR)
+.HP
+\fB\-dns\fR
+.IP
+Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (default: 1)
+.HP
+\fB\-dnsseed\fR
+.IP
+Query for peer addresses via DNS lookup, if low on addresses (default: 1
+unless \fB\-connect\fR used or \fB\-maxconnections\fR=\fI\,0\/\fR)
+.HP
+\fB\-externalip=\fR<ip>
+.IP
+Specify your own public address
+.HP
+\fB\-fixedseeds\fR
+.IP
+Allow fixed seeds if DNS seeds don't provide peers (default: 1)
+.HP
+\fB\-forcednsseed\fR
+.IP
+Always query for peer addresses via DNS lookup (default: 0)
+.HP
+\fB\-i2pacceptincoming\fR
+.IP
+Whether to accept inbound I2P connections (default: 1). Ignored if
+\fB\-i2psam\fR is not set. Listening for inbound I2P connections is done
+through the SAM proxy, not by binding to a local address and
+port.
+.HP
+\fB\-i2psam=\fR<ip:port>
+.IP
+I2P SAM proxy to reach I2P peers and accept I2P connections (default:
+none)
+.HP
+\fB\-listen\fR
+.IP
+Accept connections from outside (default: 1 if no \fB\-proxy\fR, \fB\-connect\fR or
+\fB\-maxconnections\fR=\fI\,0\/\fR)
+.HP
+\fB\-listenonion\fR
+.IP
+Automatically create Tor onion service (default: 1)
+.HP
+\fB\-maxconnections=\fR<n>
+.IP
+Maintain at most <n> connections to peers (default: 125). This limit
+does not apply to connections manually added via \fB\-addnode\fR or the
+addnode RPC, which have a separate limit of 8.
+.HP
+\fB\-maxreceivebuffer=\fR<n>
+.IP
+Maximum per\-connection receive buffer, <n>*1000 bytes (default: 5000)
+.HP
+\fB\-maxsendbuffer=\fR<n>
+.IP
+Maximum per\-connection memory usage for the send buffer, <n>*1000 bytes
+(default: 1000)
+.HP
+\fB\-maxtimeadjustment\fR
+.IP
+Maximum allowed median peer time offset adjustment. Local perspective of
+time may be influenced by outbound peers forward or backward by
+this amount (default: 4200 seconds).
+.HP
+\fB\-maxuploadtarget=\fR<n>
+.IP
+Tries to keep outbound traffic under the given target per 24h. Limit
+does not apply to peers with 'download' permission or blocks
+created within past week. 0 = no limit (default: 0M). Optional
+suffix units [k|K|m|M|g|G|t|T] (default: M). Lowercase is 1000
+base while uppercase is 1024 base
+.HP
+\fB\-natpmp\fR
+.IP
+Use NAT\-PMP to map the listening port (default: 0)
+.HP
+\fB\-networkactive\fR
+.IP
+Enable all P2P network activity (default: 1). Can be changed by the
+setnetworkactive RPC command
+.HP
+\fB\-onion=\fR<ip:port>
+.IP
+Use separate SOCKS5 proxy to reach peers via Tor onion services, set
+\fB\-noonion\fR to disable (default: \fB\-proxy\fR)
+.HP
+\fB\-onlynet=\fR<net>
+.IP
+Make automatic outbound connections only to network <net> (ipv4, ipv6,
+onion, i2p, cjdns). Inbound and manual connections are not
+affected by this option. It can be specified multiple times to
+allow multiple networks.
+.HP
+\fB\-peerblockfilters\fR
+.IP
+Serve compact block filters to peers per BIP 157 (default: 0)
+.HP
+\fB\-peerbloomfilters\fR
+.IP
+Support filtering of blocks and transaction with bloom filters (default:
+0)
+.HP
+\fB\-port=\fR<port>
+.IP
+Listen for connections on <port>. Nodes not using the default ports
+(default: 8333, testnet: 18333, signet: 38333, regtest: 18444)
+are unlikely to get incoming connections. Not relevant for I2P
+(see doc/i2p.md).
+.HP
+\fB\-proxy=\fR<ip:port>
+.IP
+Connect through SOCKS5 proxy, set \fB\-noproxy\fR to disable (default:
+disabled)
+.HP
+\fB\-proxyrandomize\fR
+.IP
+Randomize credentials for every proxy connection. This enables Tor
+stream isolation (default: 1)
+.HP
+\fB\-seednode=\fR<ip>
+.IP
+Connect to a node to retrieve peer addresses, and disconnect. This
+option can be specified multiple times to connect to multiple
+nodes.
+.HP
+\fB\-timeout=\fR<n>
+.IP
+Specify socket connection timeout in milliseconds. If an initial attempt
+to connect is unsuccessful after this amount of time, drop it
+(minimum: 1, default: 5000)
+.HP
+\fB\-torcontrol=\fR<ip>:<port>
+.IP
+Tor control host and port to use if onion listening enabled (default:
+127.0.0.1:9051). If no port is specified, the default port of
+9051 will be used.
+.HP
+\fB\-torpassword=\fR<pass>
+.IP
+Tor control port password (default: empty)
+.HP
+\fB\-upnp\fR
+.IP
+Use UPnP to map the listening port (default: 1 when listening and no
+\fB\-proxy\fR)
+.HP
+\fB\-v2transport\fR
+.IP
+Support v2 transport (default: 0)
+.HP
+\fB\-whitebind=\fR<[permissions@]addr>
+.IP
+Bind to the given address and add permission flags to the peers
+connecting to it. Use [host]:port notation for IPv6. Allowed
+permissions: bloomfilter (allow requesting BIP37 filtered blocks
+and transactions), noban (do not ban for misbehavior; implies
+download), forcerelay (relay transactions that are already in the
+mempool; implies relay), relay (relay even in \fB\-blocksonly\fR mode,
+and unlimited transaction announcements), mempool (allow
+requesting BIP35 mempool contents), download (allow getheaders
+during IBD, no disconnect after maxuploadtarget limit), addr
+(responses to GETADDR avoid hitting the cache and contain random
+records with the most up\-to\-date info). Specify multiple
+permissions separated by commas (default:
+download,noban,mempool,relay). Can be specified multiple times.
+.HP
+\fB\-whitelist=\fR<[permissions@]IP address or network>
+.IP
+Add permission flags to the peers connecting from the given IP address
+(e.g. 1.2.3.4) or CIDR\-notated network (e.g. 1.2.3.0/24). Uses
+the same permissions as \fB\-whitebind\fR. Can be specified multiple
+times.
+.PP
+Wallet options:
+.HP
+\fB\-addresstype\fR
+.IP
+What type of addresses to use ("legacy", "p2sh\-segwit", "bech32", or
+"bech32m", default: "bech32")
+.HP
+\fB\-avoidpartialspends\fR
+.IP
+Group outputs by address, selecting many (possibly all) or none, instead
+of selecting on a per\-output basis. Privacy is improved as
+addresses are mostly swept with fewer transactions and outputs
+are aggregated in clean change addresses. It may result in higher
+fees due to less optimal coin selection caused by this added
+limitation and possibly a larger\-than\-necessary number of inputs
+being used. Always enabled for wallets with "avoid_reuse"
+enabled, otherwise default: 0.
+.HP
+\fB\-changetype\fR
+.IP
+What type of change to use ("legacy", "p2sh\-segwit", "bech32", or
+"bech32m"). Default is "legacy" when \fB\-addresstype\fR=\fI\,legacy\/\fR, else it
+is an implementation detail.
+.HP
+\fB\-consolidatefeerate=\fR<amt>
+.IP
+The maximum feerate (in BTC/kvB) at which transaction building may use
+more inputs than strictly necessary so that the wallet's UTXO
+pool can be reduced (default: 0.0001).
+.HP
+\fB\-disablewallet\fR
+.IP
+Do not load the wallet and disable wallet RPC calls
+.HP
+\fB\-discardfee=\fR<amt>
+.IP
+The fee rate (in BTC/kvB) that indicates your tolerance for discarding
+change by adding it to the fee (default: 0.0001). Note: An output
+is discarded if it is dust at this rate, but we will always
+discard up to the dust relay fee and a discard fee above that is
+limited by the fee estimate for the longest target
+.HP
+\fB\-fallbackfee=\fR<amt>
+.IP
+A fee rate (in BTC/kvB) that will be used when fee estimation has
+insufficient data. 0 to entirely disable the fallbackfee feature.
+(default: 0.00)
+.HP
+\fB\-keypool=\fR<n>
+.IP
+Set key pool size to <n> (default: 1000). Warning: Smaller sizes may
+increase the risk of losing funds when restoring from an old
+backup, if none of the addresses in the original keypool have
+been used.
+.HP
+\fB\-maxapsfee=\fR<n>
+.IP
+Spend up to this amount in additional (absolute) fees (in BTC) if it
+allows the use of partial spend avoidance (default: 0.00)
+.HP
+\fB\-mintxfee=\fR<amt>
+.IP
+Fee rates (in BTC/kvB) smaller than this are considered zero fee for
+transaction creation (default: 0.00001)
+.HP
+\fB\-paytxfee=\fR<amt>
+.IP
+Fee rate (in BTC/kvB) to add to transactions you send (default: 0.00)
+.HP
+\fB\-signer=\fR<cmd>
+.IP
+External signing tool, see doc/external\-signer.md
+.HP
+\fB\-spendzeroconfchange\fR
+.IP
+Spend unconfirmed change when sending transactions (default: 1)
+.HP
+\fB\-txconfirmtarget=\fR<n>
+.IP
+If paytxfee is not set, include enough fee so transactions begin
+confirmation on average within n blocks (default: 6)
+.HP
+\fB\-wallet=\fR<path>
+.IP
+Specify wallet path to load at startup. Can be used multiple times to
+load multiple wallets. Path is to a directory containing wallet
+data and log files. If the path is not absolute, it is
+interpreted relative to <walletdir>. This only loads existing
+wallets and does not create new ones. For backwards compatibility
+this also accepts names of existing top\-level data files in
+<walletdir>.
+.HP
+\fB\-walletbroadcast\fR
+.IP
+Make the wallet broadcast transactions (default: 1)
+.HP
+\fB\-walletdir=\fR<dir>
+.IP
+Specify directory to hold wallets (default: <datadir>/wallets if it
+exists, otherwise <datadir>)
+.HP
+\fB\-walletnotify=\fR<cmd>
+.IP
+Execute command when a wallet transaction changes. %s in cmd is replaced
+by TxID, %w is replaced by wallet name, %b is replaced by the
+hash of the block including the transaction (set to 'unconfirmed'
+if the transaction is not included) and %h is replaced by the
+block height (\fB\-1\fR if not included). %w is not currently
+implemented on windows. On systems where %w is supported, it
+should NOT be quoted because this would break shell escaping used
+to invoke the command.
+.HP
+\fB\-walletrbf\fR
+.IP
+Send transactions with full\-RBF opt\-in enabled (RPC only, default: 1)
+.PP
+ZeroMQ notification options:
+.HP
+\fB\-zmqpubhashblock=\fR<address>
+.IP
+Enable publish hash block in <address>
+.HP
+\fB\-zmqpubhashblockhwm=\fR<n>
+.IP
+Set publish hash block outbound message high water mark (default: 1000)
+.HP
+\fB\-zmqpubhashtx=\fR<address>
+.IP
+Enable publish hash transaction in <address>
+.HP
+\fB\-zmqpubhashtxhwm=\fR<n>
+.IP
+Set publish hash transaction outbound message high water mark (default:
+1000)
+.HP
+\fB\-zmqpubrawblock=\fR<address>
+.IP
+Enable publish raw block in <address>
+.HP
+\fB\-zmqpubrawblockhwm=\fR<n>
+.IP
+Set publish raw block outbound message high water mark (default: 1000)
+.HP
+\fB\-zmqpubrawtx=\fR<address>
+.IP
+Enable publish raw transaction in <address>
+.HP
+\fB\-zmqpubrawtxhwm=\fR<n>
+.IP
+Set publish raw transaction outbound message high water mark (default:
+1000)
+.HP
+\fB\-zmqpubsequence=\fR<address>
+.IP
+Enable publish hash block and tx sequence in <address>
+.HP
+\fB\-zmqpubsequencehwm=\fR<n>
+.IP
+Set publish hash sequence message high water mark (default: 1000)
+.PP
+Debugging/Testing options:
+.HP
+\fB\-debug=\fR<category>
+.IP
+Output debug and trace logging (default: \fB\-nodebug\fR, supplying <category>
+is optional). If <category> is not supplied or if <category> = 1,
+output all debug and trace logging. <category> can be: addrman,
+bench, blockstorage, cmpctblock, coindb, estimatefee, http, i2p,
+ipc, leveldb, libevent, mempool, mempoolrej, net, proxy, prune,
+qt, rand, reindex, rpc, scan, selectcoins, tor, txpackages,
+txreconciliation, util, validation, walletdb, zmq. This option
+can be specified multiple times to output multiple categories.
+.HP
+\fB\-debugexclude=\fR<category>
+.IP
+Exclude debug and trace logging for a category. Can be used in
+conjunction with \fB\-debug\fR=\fI\,1\/\fR to output debug and trace logging for
+all categories except the specified category. This option can be
+specified multiple times to exclude multiple categories.
+.HP
+\fB\-help\-debug\fR
+.IP
+Print help message with debugging options and exit
+.HP
+\fB\-logips\fR
+.IP
+Include IP addresses in debug output (default: 0)
+.HP
+\fB\-logsourcelocations\fR
+.IP
+Prepend debug output with name of the originating source location
+(source file, line number and function name) (default: 0)
+.HP
+\fB\-logthreadnames\fR
+.IP
+Prepend debug output with name of the originating thread (only available
+on platforms supporting thread_local) (default: 0)
+.HP
+\fB\-logtimestamps\fR
+.IP
+Prepend debug output with timestamp (default: 1)
+.HP
+\fB\-maxtxfee=\fR<amt>
+.IP
+Maximum total fees (in BTC) to use in a single wallet transaction;
+setting this too low may abort large transactions (default: 0.10)
+.HP
+\fB\-printtoconsole\fR
+.IP
+Send trace/debug info to console (default: 1 when no \fB\-daemon\fR. To disable
+logging to file, set \fB\-nodebuglogfile\fR)
+.HP
+\fB\-shrinkdebugfile\fR
+.IP
+Shrink debug.log file on client startup (default: 1 when no \fB\-debug\fR)
+.HP
+\fB\-uacomment=\fR<cmt>
+.IP
+Append comment to the user agent string
+.PP
+Chain selection options:
+.HP
+\fB\-chain=\fR<chain>
+.IP
+Use the chain <chain> (default: main). Allowed values: main, test,
+signet, regtest
+.HP
+\fB\-signet\fR
+.IP
+Use the signet chain. Equivalent to \fB\-chain\fR=\fI\,signet\/\fR. Note that the network
+is defined by the \fB\-signetchallenge\fR parameter
+.HP
+\fB\-signetchallenge\fR
+.IP
+Blocks must satisfy the given script to be considered valid (only for
+signet networks; defaults to the global default signet test
+network challenge)
+.HP
+\fB\-signetseednode\fR
+.IP
+Specify a seed node for the signet network, in the hostname[:port]
+format, e.g. sig.net:1234 (may be used multiple times to specify
+multiple seed nodes; defaults to the global default signet test
+network seed node(s))
+.HP
+\fB\-testnet\fR
+.IP
+Use the test chain. Equivalent to \fB\-chain\fR=\fI\,test\/\fR.
+.PP
+Node relay options:
+.HP
+\fB\-bytespersigop\fR
+.IP
+Equivalent bytes per sigop in transactions for relay and mining
+(default: 20)
+.HP
+\fB\-datacarrier\fR
+.IP
+Relay and mine data carrier transactions (default: 1)
+.HP
+\fB\-datacarriersize\fR
+.IP
+Relay and mine transactions whose data\-carrying raw scriptPubKey is of
+this size or less (default: 83)
+.HP
+\fB\-mempoolfullrbf\fR
+.IP
+Accept transaction replace\-by\-fee without requiring replaceability
+signaling (default: 0)
+.HP
+\fB\-minrelaytxfee=\fR<amt>
+.IP
+Fees (in BTC/kvB) smaller than this are considered zero fee for
+relaying, mining and transaction creation (default: 0.00001)
+.HP
+\fB\-permitbaremultisig\fR
+.IP
+Relay non\-P2SH multisig (default: 1)
+.HP
+\fB\-whitelistforcerelay\fR
+.IP
+Add 'forcerelay' permission to whitelisted inbound peers with default
+permissions. This will relay transactions even if the
+transactions were already in the mempool. (default: 0)
+.HP
+\fB\-whitelistrelay\fR
+.IP
+Add 'relay' permission to whitelisted inbound peers with default
+permissions. This will accept relayed transactions even when not
+relaying transactions (default: 1)
+.PP
+Block creation options:
+.HP
+\fB\-blockmaxweight=\fR<n>
+.IP
+Set maximum BIP141 block weight (default: 3996000)
+.HP
+\fB\-blockmintxfee=\fR<amt>
+.IP
+Set lowest fee rate (in BTC/kvB) for transactions to be included in
+block creation. (default: 0.00001)
+.PP
+RPC server options:
+.HP
+\fB\-rest\fR
+.IP
+Accept public REST requests (default: 0)
+.HP
+\fB\-rpcallowip=\fR<ip>
+.IP
+Allow JSON\-RPC connections from specified source. Valid values for <ip>
+are a single IP (e.g. 1.2.3.4), a network/netmask (e.g.
+1.2.3.4/255.255.255.0), a network/CIDR (e.g. 1.2.3.4/24), all
+ipv4 (0.0.0.0/0), or all ipv6 (::/0). This option can be
+specified multiple times
+.HP
+\fB\-rpcauth=\fR<userpw>
+.IP
+Username and HMAC\-SHA\-256 hashed password for JSON\-RPC connections. The
+field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
+canonical python script is included in share/rpcauth. The client
+then connects normally using the
+rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
+option can be specified multiple times
+.HP
+\fB\-rpcbind=\fR<addr>[:port]
+.IP
+Bind to given address to listen for JSON\-RPC connections. Do not expose
+the RPC server to untrusted networks such as the public internet!
+This option is ignored unless \fB\-rpcallowip\fR is also passed. Port is
+optional and overrides \fB\-rpcport\fR. Use [host]:port notation for
+IPv6. This option can be specified multiple times (default:
+127.0.0.1 and ::1 i.e., localhost)
+.HP
+\fB\-rpccookiefile=\fR<loc>
+.IP
+Location of the auth cookie. Relative paths will be prefixed by a
+net\-specific datadir location. (default: data dir)
+.HP
+\fB\-rpcpassword=\fR<pw>
+.IP
+Password for JSON\-RPC connections
+.HP
+\fB\-rpcport=\fR<port>
+.IP
+Listen for JSON\-RPC connections on <port> (default: 8332, testnet:
+18332, signet: 38332, regtest: 18443)
+.HP
+\fB\-rpcserialversion\fR
+.IP
+Sets the serialization of raw transaction or block hex returned in
+non\-verbose mode, non\-segwit(0) (DEPRECATED) or segwit(1)
+(default: 1)
+.HP
+\fB\-rpcthreads=\fR<n>
+.IP
+Set the number of threads to service RPC calls (default: 4)
+.HP
+\fB\-rpcuser=\fR<user>
+.IP
+Username for JSON\-RPC connections
+.HP
+\fB\-rpcwhitelist=\fR<whitelist>
+.IP
+Set a whitelist to filter incoming RPC calls for a specific user. The
+field <whitelist> comes in the format: <USERNAME>:<rpc 1>,<rpc
+2>,...,<rpc n>. If multiple whitelists are set for a given user,
+they are set\-intersected. See \fB\-rpcwhitelistdefault\fR documentation
+for information on default whitelist behavior.
+.HP
+\fB\-rpcwhitelistdefault\fR
+.IP
+Sets default behavior for rpc whitelisting. Unless rpcwhitelistdefault
+is set to 0, if any \fB\-rpcwhitelist\fR is set, the rpc server acts as
+if all rpc users are subject to empty\-unless\-otherwise\-specified
+whitelists. If rpcwhitelistdefault is set to 1 and no
+\fB\-rpcwhitelist\fR is set, rpc server acts as if all rpc users are
+subject to empty whitelists.
+.HP
+\fB\-server\fR
+.IP
+Accept command line and JSON\-RPC commands
+.PP
+UI Options:
+.HP
+\fB\-choosedatadir\fR
+.IP
+Choose data directory on startup (default: 0)
+.HP
+\fB\-lang=\fR<lang>
+.IP
+Set language, for example "de_DE" (default: system locale)
+.HP
+\fB\-min\fR
+.IP
+Start minimized
+.HP
+\fB\-resetguisettings\fR
+.IP
+Reset all settings changed in the GUI
+.HP
+\fB\-splash\fR
+.IP
+Show splash screen on startup (default: 1)
+.SH COPYRIGHT
+Copyright (C) 2009-2023 The Bitcoin Core developers
 
-This is a placeholder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
+Please contribute if you find Bitcoin Core useful. Visit
+<https://bitcoincore.org/> for further information about the software.
+The source code is available from <https://github.com/bitcoin/bitcoin>.
+
+This is experimental software.
+Distributed under the MIT software license, see the accompanying file COPYING
+or <https://opensource.org/licenses/MIT>
\ No newline at end of file
diff --git a/doc/man/bitcoin-tx.1 b/doc/man/bitcoin-tx.1
index 776bb46234..4c3729c6c4 100644
--- a/doc/man/bitcoin-tx.1
+++ b/doc/man/bitcoin-tx.1
@@ -1,5 +1,145 @@
-.TH BITCOIN-TX "1"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
+.TH BITCOIN-TX "1" "October 2023" "bitcoin-tx v26.0.0rc1" "User Commands"
 .SH NAME
-bitcoin-tx \- manual page for bitcoin-tx
+bitcoin-tx \- manual page for bitcoin-tx v26.0.0rc1
+.SH SYNOPSIS
+.B bitcoin-tx
+[\fI\,options\/\fR] \fI\,<hex-tx> \/\fR[\fI\,commands\/\fR]  \fI\,Update hex-encoded bitcoin transaction\/\fR
+.br
+.B bitcoin-tx
+[\fI\,options\/\fR] \fI\,-create \/\fR[\fI\,commands\/\fR]   \fI\,Create hex-encoded bitcoin transaction\/\fR
+.SH DESCRIPTION
+Bitcoin Core bitcoin\-tx utility version v26.0.0rc1
+.SH OPTIONS
+.HP
+\-?
+.IP
+Print this help message and exit
+.HP
+\fB\-create\fR
+.IP
+Create new, empty TX.
+.HP
+\fB\-json\fR
+.IP
+Select JSON output
+.HP
+\fB\-txid\fR
+.IP
+Output only the hex\-encoded transaction id of the resultant transaction.
+.HP
+\fB\-version\fR
+.IP
+Print version and exit
+.PP
+Debugging/Testing options:
+.PP
+Chain selection options:
+.HP
+\fB\-chain=\fR<chain>
+.IP
+Use the chain <chain> (default: main). Allowed values: main, test,
+signet, regtest
+.HP
+\fB\-signet\fR
+.IP
+Use the signet chain. Equivalent to \fB\-chain\fR=\fI\,signet\/\fR. Note that the network
+is defined by the \fB\-signetchallenge\fR parameter
+.HP
+\fB\-signetchallenge\fR
+.IP
+Blocks must satisfy the given script to be considered valid (only for
+signet networks; defaults to the global default signet test
+network challenge)
+.HP
+\fB\-signetseednode\fR
+.IP
+Specify a seed node for the signet network, in the hostname[:port]
+format, e.g. sig.net:1234 (may be used multiple times to specify
+multiple seed nodes; defaults to the global default signet test
+network seed node(s))
+.HP
+\fB\-testnet\fR
+.IP
+Use the test chain. Equivalent to \fB\-chain\fR=\fI\,test\/\fR.
+.PP
+Commands:
+.IP
+delin=N
+.IP
+Delete input N from TX
+.IP
+delout=N
+.IP
+Delete output N from TX
+.IP
+in=TXID:VOUT(:SEQUENCE_NUMBER)
+.IP
+Add input to TX
+.IP
+locktime=N
+.IP
+Set TX lock time to N
+.IP
+nversion=N
+.IP
+Set TX version to N
+.IP
+outaddr=VALUE:ADDRESS
+.IP
+Add address\-based output to TX
+.IP
+outdata=[VALUE:]DATA
+.IP
+Add data\-based output to TX
+.IP
+outmultisig=VALUE:REQUIRED:PUBKEYS:PUBKEY1:PUBKEY2:....[:FLAGS]
+.IP
+Add Pay To n\-of\-m Multi\-sig output to TX. n = REQUIRED, m = PUBKEYS.
+Optionally add the "W" flag to produce a
+pay\-to\-witness\-script\-hash output. Optionally add the "S" flag to
+wrap the output in a pay\-to\-script\-hash.
+.IP
+outpubkey=VALUE:PUBKEY[:FLAGS]
+.IP
+Add pay\-to\-pubkey output to TX. Optionally add the "W" flag to produce a
+pay\-to\-witness\-pubkey\-hash output. Optionally add the "S" flag to
+wrap the output in a pay\-to\-script\-hash.
+.IP
+outscript=VALUE:SCRIPT[:FLAGS]
+.IP
+Add raw script output to TX. Optionally add the "W" flag to produce a
+pay\-to\-witness\-script\-hash output. Optionally add the "S" flag to
+wrap the output in a pay\-to\-script\-hash.
+.IP
+replaceable(=N)
+.IP
+Set RBF opt\-in sequence number for input N (if not provided, opt\-in all
+available inputs)
+.IP
+sign=SIGHASH\-FLAGS
+.IP
+Add zero or more signatures to transaction. This command requires JSON
+registers:prevtxs=JSON object, privatekeys=JSON object. See
+signrawtransactionwithkey docs for format of sighash flags, JSON
+objects.
+.PP
+Register Commands:
+.IP
+load=NAME:FILENAME
+.IP
+Load JSON file FILENAME into register NAME
+.IP
+set=NAME:JSON\-STRING
+.IP
+Set register NAME to given JSON\-STRING
+.SH COPYRIGHT
+Copyright (C) 2009-2023 The Bitcoin Core developers
 
-This is a placeholder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
+Please contribute if you find Bitcoin Core useful. Visit
+<https://bitcoincore.org/> for further information about the software.
+The source code is available from <https://github.com/bitcoin/bitcoin>.
+
+This is experimental software.
+Distributed under the MIT software license, see the accompanying file COPYING
+or <https://opensource.org/licenses/MIT>
\ No newline at end of file
diff --git a/doc/man/bitcoin-util.1 b/doc/man/bitcoin-util.1
index 5c733c6e21..04380848fb 100644
--- a/doc/man/bitcoin-util.1
+++ b/doc/man/bitcoin-util.1
@@ -1,5 +1,65 @@
-.TH BITCOIN-UTIL "1"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
+.TH BITCOIN-UTIL "1" "October 2023" "bitcoin-util v26.0.0rc1" "User Commands"
 .SH NAME
-bitcoin-util \- manual page for bitcoin-util
+bitcoin-util \- manual page for bitcoin-util v26.0.0rc1
+.SH SYNOPSIS
+.B bitcoin-util
+[\fI\,options\/\fR] [\fI\,commands\/\fR]  \fI\,Do stuff\/\fR
+.SH DESCRIPTION
+Bitcoin Core bitcoin\-util utility version v26.0.0rc1
+.SH OPTIONS
+.HP
+\-?
+.IP
+Print this help message and exit
+.HP
+\fB\-version\fR
+.IP
+Print version and exit
+.PP
+Debugging/Testing options:
+.PP
+Chain selection options:
+.HP
+\fB\-chain=\fR<chain>
+.IP
+Use the chain <chain> (default: main). Allowed values: main, test,
+signet, regtest
+.HP
+\fB\-signet\fR
+.IP
+Use the signet chain. Equivalent to \fB\-chain\fR=\fI\,signet\/\fR. Note that the network
+is defined by the \fB\-signetchallenge\fR parameter
+.HP
+\fB\-signetchallenge\fR
+.IP
+Blocks must satisfy the given script to be considered valid (only for
+signet networks; defaults to the global default signet test
+network challenge)
+.HP
+\fB\-signetseednode\fR
+.IP
+Specify a seed node for the signet network, in the hostname[:port]
+format, e.g. sig.net:1234 (may be used multiple times to specify
+multiple seed nodes; defaults to the global default signet test
+network seed node(s))
+.HP
+\fB\-testnet\fR
+.IP
+Use the test chain. Equivalent to \fB\-chain\fR=\fI\,test\/\fR.
+.PP
+Commands:
+.IP
+grind
+.IP
+Perform proof of work on hex header string
+.SH COPYRIGHT
+Copyright (C) 2009-2023 The Bitcoin Core developers
 
-This is a placeholder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
+Please contribute if you find Bitcoin Core useful. Visit
+<https://bitcoincore.org/> for further information about the software.
+The source code is available from <https://github.com/bitcoin/bitcoin>.
+
+This is experimental software.
+Distributed under the MIT software license, see the accompanying file COPYING
+or <https://opensource.org/licenses/MIT>
\ No newline at end of file
diff --git a/doc/man/bitcoin-wallet.1 b/doc/man/bitcoin-wallet.1
index 2da43dec66..60104d4e53 100644
--- a/doc/man/bitcoin-wallet.1
+++ b/doc/man/bitcoin-wallet.1
@@ -1,5 +1,121 @@
-.TH BITCOIN-WALLET "1"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
+.TH BITCOIN-WALLET "1" "October 2023" "bitcoin-wallet v26.0.0rc1" "User Commands"
 .SH NAME
-bitcoin-wallet \- manual page for bitcoin-wallet
+bitcoin-wallet \- manual page for bitcoin-wallet v26.0.0rc1
+.SH DESCRIPTION
+Bitcoin Core bitcoin\-wallet version v26.0.0rc1
+.PP
+bitcoin\-wallet is an offline tool for creating and interacting with Bitcoin Core wallet files.
+By default bitcoin\-wallet will act on wallets in the default mainnet wallet directory in the datadir.
+To change the target wallet, use the \fB\-datadir\fR, \fB\-wallet\fR and \fB\-regtest\fR/\-signet/\-testnet arguments.
+.SS "Usage:"
+.IP
+bitcoin\-wallet [options] <command>
+.SH OPTIONS
+.HP
+\-?
+.IP
+Print this help message and exit
+.HP
+\fB\-datadir=\fR<dir>
+.IP
+Specify data directory
+.HP
+\fB\-descriptors\fR
+.IP
+Create descriptors wallet. Only for 'create'
+.HP
+\fB\-dumpfile=\fR<file name>
+.IP
+When used with 'dump', writes out the records to this file. When used
+with 'createfromdump', loads the records into a new wallet.
+.HP
+\fB\-format=\fR<format>
+.IP
+The format of the wallet file to create. Either "bdb" or "sqlite". Only
+used with 'createfromdump'
+.HP
+\fB\-legacy\fR
+.IP
+Create legacy wallet. Only for 'create'
+.HP
+\fB\-version\fR
+.IP
+Print version and exit
+.HP
+\fB\-wallet=\fR<wallet\-name>
+.IP
+Specify wallet name
+.PP
+Debugging/Testing options:
+.HP
+\fB\-debug=\fR<category>
+.IP
+Output debugging information (default: 0).
+.HP
+\fB\-printtoconsole\fR
+.IP
+Send trace/debug info to console (default: 1 when no \fB\-debug\fR is true, 0
+otherwise).
+.PP
+Chain selection options:
+.HP
+\fB\-chain=\fR<chain>
+.IP
+Use the chain <chain> (default: main). Allowed values: main, test,
+signet, regtest
+.HP
+\fB\-signet\fR
+.IP
+Use the signet chain. Equivalent to \fB\-chain\fR=\fI\,signet\/\fR. Note that the network
+is defined by the \fB\-signetchallenge\fR parameter
+.HP
+\fB\-signetchallenge\fR
+.IP
+Blocks must satisfy the given script to be considered valid (only for
+signet networks; defaults to the global default signet test
+network challenge)
+.HP
+\fB\-signetseednode\fR
+.IP
+Specify a seed node for the signet network, in the hostname[:port]
+format, e.g. sig.net:1234 (may be used multiple times to specify
+multiple seed nodes; defaults to the global default signet test
+network seed node(s))
+.HP
+\fB\-testnet\fR
+.IP
+Use the test chain. Equivalent to \fB\-chain\fR=\fI\,test\/\fR.
+.PP
+Commands:
+.IP
+create
+.IP
+Create new wallet file
+.IP
+createfromdump
+.IP
+Create new wallet file from dumped records
+.IP
+dump
+.IP
+Print out all of the wallet key\-value records
+.IP
+info
+.IP
+Get wallet info
+.IP
+salvage
+.IP
+Attempt to recover private keys from a corrupt wallet. Warning:
+\&'salvage' is experimental.
+.SH COPYRIGHT
+Copyright (C) 2009-2023 The Bitcoin Core developers
 
-This is a placeholder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
+Please contribute if you find Bitcoin Core useful. Visit
+<https://bitcoincore.org/> for further information about the software.
+The source code is available from <https://github.com/bitcoin/bitcoin>.
+
+This is experimental software.
+Distributed under the MIT software license, see the accompanying file COPYING
+or <https://opensource.org/licenses/MIT>
\ No newline at end of file
diff --git a/doc/man/bitcoind.1 b/doc/man/bitcoind.1
index 2c88f74520..8a6c6b9d5c 100644
--- a/doc/man/bitcoind.1
+++ b/doc/man/bitcoind.1
@@ -1,5 +1,800 @@
-.TH BITCOIND "1"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
+.TH BITCOIND "1" "October 2023" "bitcoind v26.0.0rc1" "User Commands"
 .SH NAME
-bitcoind \- manual page for bitcoind
+bitcoind \- manual page for bitcoind v26.0.0rc1
+.SH SYNOPSIS
+.B bitcoind
+[\fI\,options\/\fR]                     \fI\,Start Bitcoin Core\/\fR
+.SH DESCRIPTION
+Bitcoin Core version v26.0.0rc1
+.SH OPTIONS
+.HP
+\-?
+.IP
+Print this help message and exit
+.HP
+\fB\-alertnotify=\fR<cmd>
+.IP
+Execute command when an alert is raised (%s in cmd is replaced by
+message)
+.HP
+\fB\-allowignoredconf\fR
+.IP
+For backwards compatibility, treat an unused bitcoin.conf file in the
+datadir as a warning, not an error.
+.HP
+\fB\-assumevalid=\fR<hex>
+.IP
+If this block is in the chain assume that it and its ancestors are valid
+and potentially skip their script verification (0 to verify all,
+default:
+00000000000000000001a0a448d6cf2546b06801389cc030b2b18c6491266815,
+testnet:
+0000000000000093bcb68c03a9a168ae252572d348a2eaeba2cdf9231d73206f,
+signet:
+0000013d778ba3f914530f11f6b69869c9fab54acff85acd7b8201d111f19b7f)
+.HP
+\fB\-blockfilterindex=\fR<type>
+.IP
+Maintain an index of compact filters by block (default: 0, values:
+basic). If <type> is not supplied or if <type> = 1, indexes for
+all known types are enabled.
+.HP
+\fB\-blocknotify=\fR<cmd>
+.IP
+Execute command when the best block changes (%s in cmd is replaced by
+block hash)
+.HP
+\fB\-blockreconstructionextratxn=\fR<n>
+.IP
+Extra transactions to keep in memory for compact block reconstructions
+(default: 100)
+.HP
+\fB\-blocksdir=\fR<dir>
+.IP
+Specify directory to hold blocks subdirectory for *.dat files (default:
+<datadir>)
+.HP
+\fB\-blocksonly\fR
+.IP
+Whether to reject transactions from network peers. Automatic broadcast
+and rebroadcast of any transactions from inbound peers is
+disabled, unless the peer has the 'forcerelay' permission. RPC
+transactions are not affected. (default: 0)
+.HP
+\fB\-coinstatsindex\fR
+.IP
+Maintain coinstats index used by the gettxoutsetinfo RPC (default: 0)
+.HP
+\fB\-conf=\fR<file>
+.IP
+Specify path to read\-only configuration file. Relative paths will be
+prefixed by datadir location (only useable from command line, not
+configuration file) (default: bitcoin.conf)
+.HP
+\fB\-daemon\fR
+.IP
+Run in the background as a daemon and accept commands (default: 0)
+.HP
+\fB\-daemonwait\fR
+.IP
+Wait for initialization to be finished before exiting. This implies
+\fB\-daemon\fR (default: 0)
+.HP
+\fB\-datadir=\fR<dir>
+.IP
+Specify data directory
+.HP
+\fB\-dbcache=\fR<n>
+.IP
+Maximum database cache size <n> MiB (4 to 16384, default: 450). In
+addition, unused mempool memory is shared for this cache (see
+\fB\-maxmempool\fR).
+.HP
+\fB\-debuglogfile=\fR<file>
+.IP
+Specify location of debug log file (default: debug.log). Relative paths
+will be prefixed by a net\-specific datadir location. Pass
+\fB\-nodebuglogfile\fR to disable writing the log to a file.
+.HP
+\fB\-includeconf=\fR<file>
+.IP
+Specify additional configuration file, relative to the \fB\-datadir\fR path
+(only useable from configuration file, not command line)
+.HP
+\fB\-loadblock=\fR<file>
+.IP
+Imports blocks from external file on startup
+.HP
+\fB\-maxmempool=\fR<n>
+.IP
+Keep the transaction memory pool below <n> megabytes (default: 300)
+.HP
+\fB\-maxorphantx=\fR<n>
+.IP
+Keep at most <n> unconnectable transactions in memory (default: 100)
+.HP
+\fB\-mempoolexpiry=\fR<n>
+.IP
+Do not keep transactions in the mempool longer than <n> hours (default:
+336)
+.HP
+\fB\-par=\fR<n>
+.IP
+Set the number of script verification threads (\fB\-10\fR to 15, 0 = auto, <0 =
+leave that many cores free, default: 0)
+.HP
+\fB\-persistmempool\fR
+.IP
+Whether to save the mempool on shutdown and load on restart (default: 1)
+.HP
+\fB\-pid=\fR<file>
+.IP
+Specify pid file. Relative paths will be prefixed by a net\-specific
+datadir location. (default: bitcoind.pid)
+.HP
+\fB\-prune=\fR<n>
+.IP
+Reduce storage requirements by enabling pruning (deleting) of old
+blocks. This allows the pruneblockchain RPC to be called to
+delete specific blocks and enables automatic pruning of old
+blocks if a target size in MiB is provided. This mode is
+incompatible with \fB\-txindex\fR. Warning: Reverting this setting
+requires re\-downloading the entire blockchain. (default: 0 =
+disable pruning blocks, 1 = allow manual pruning via RPC, >=550 =
+automatically prune block files to stay under the specified
+target size in MiB)
+.HP
+\fB\-reindex\fR
+.IP
+If enabled, wipe chain state and block index, and rebuild them from
+blk*.dat files on disk. Also wipe and rebuild other optional
+indexes that are active. If an assumeutxo snapshot was loaded,
+its chainstate will be wiped as well. The snapshot can then be
+reloaded via RPC.
+.HP
+\fB\-reindex\-chainstate\fR
+.IP
+If enabled, wipe chain state, and rebuild it from blk*.dat files on
+disk. If an assumeutxo snapshot was loaded, its chainstate will
+be wiped as well. The snapshot can then be reloaded via RPC.
+.HP
+\fB\-settings=\fR<file>
+.IP
+Specify path to dynamic settings data file. Can be disabled with
+\fB\-nosettings\fR. File is written at runtime and not meant to be
+edited by users (use bitcoin.conf instead for custom settings).
+Relative paths will be prefixed by datadir location. (default:
+settings.json)
+.HP
+\fB\-shutdownnotify=\fR<cmd>
+.IP
+Execute command immediately before beginning shutdown. The need for
+shutdown may be urgent, so be careful not to delay it long (if
+the command doesn't require interaction with the server, consider
+having it fork into the background).
+.HP
+\fB\-startupnotify=\fR<cmd>
+.IP
+Execute command on startup.
+.HP
+\fB\-txindex\fR
+.IP
+Maintain a full transaction index, used by the getrawtransaction rpc
+call (default: 0)
+.HP
+\fB\-version\fR
+.IP
+Print version and exit
+.PP
+Connection options:
+.HP
+\fB\-addnode=\fR<ip>
+.IP
+Add a node to connect to and attempt to keep the connection open (see
+the addnode RPC help for more info). This option can be specified
+multiple times to add multiple nodes; connections are limited to
+8 at a time and are counted separately from the \fB\-maxconnections\fR
+limit.
+.HP
+\fB\-asmap=\fR<file>
+.IP
+Specify asn mapping used for bucketing of the peers (default:
+ip_asn.map). Relative paths will be prefixed by the net\-specific
+datadir location.
+.HP
+\fB\-bantime=\fR<n>
+.IP
+Default duration (in seconds) of manually configured bans (default:
+86400)
+.HP
+\fB\-bind=\fR<addr>[:<port>][=onion]
+.IP
+Bind to given address and always listen on it (default: 0.0.0.0). Use
+[host]:port notation for IPv6. Append =onion to tag any incoming
+connections to that address and port as incoming Tor connections
+(default: 127.0.0.1:8334=onion, testnet: 127.0.0.1:18334=onion,
+signet: 127.0.0.1:38334=onion, regtest: 127.0.0.1:18445=onion)
+.HP
+\fB\-cjdnsreachable\fR
+.IP
+If set, then this host is configured for CJDNS (connecting to fc00::/8
+addresses would lead us to the CJDNS network, see doc/cjdns.md)
+(default: 0)
+.HP
+\fB\-connect=\fR<ip>
+.IP
+Connect only to the specified node; \fB\-noconnect\fR disables automatic
+connections (the rules for this peer are the same as for
+\fB\-addnode\fR). This option can be specified multiple times to connect
+to multiple nodes.
+.HP
+\fB\-discover\fR
+.IP
+Discover own IP addresses (default: 1 when listening and no \fB\-externalip\fR
+or \fB\-proxy\fR)
+.HP
+\fB\-dns\fR
+.IP
+Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (default: 1)
+.HP
+\fB\-dnsseed\fR
+.IP
+Query for peer addresses via DNS lookup, if low on addresses (default: 1
+unless \fB\-connect\fR used or \fB\-maxconnections\fR=\fI\,0\/\fR)
+.HP
+\fB\-externalip=\fR<ip>
+.IP
+Specify your own public address
+.HP
+\fB\-fixedseeds\fR
+.IP
+Allow fixed seeds if DNS seeds don't provide peers (default: 1)
+.HP
+\fB\-forcednsseed\fR
+.IP
+Always query for peer addresses via DNS lookup (default: 0)
+.HP
+\fB\-i2pacceptincoming\fR
+.IP
+Whether to accept inbound I2P connections (default: 1). Ignored if
+\fB\-i2psam\fR is not set. Listening for inbound I2P connections is done
+through the SAM proxy, not by binding to a local address and
+port.
+.HP
+\fB\-i2psam=\fR<ip:port>
+.IP
+I2P SAM proxy to reach I2P peers and accept I2P connections (default:
+none)
+.HP
+\fB\-listen\fR
+.IP
+Accept connections from outside (default: 1 if no \fB\-proxy\fR, \fB\-connect\fR or
+\fB\-maxconnections\fR=\fI\,0\/\fR)
+.HP
+\fB\-listenonion\fR
+.IP
+Automatically create Tor onion service (default: 1)
+.HP
+\fB\-maxconnections=\fR<n>
+.IP
+Maintain at most <n> connections to peers (default: 125). This limit
+does not apply to connections manually added via \fB\-addnode\fR or the
+addnode RPC, which have a separate limit of 8.
+.HP
+\fB\-maxreceivebuffer=\fR<n>
+.IP
+Maximum per\-connection receive buffer, <n>*1000 bytes (default: 5000)
+.HP
+\fB\-maxsendbuffer=\fR<n>
+.IP
+Maximum per\-connection memory usage for the send buffer, <n>*1000 bytes
+(default: 1000)
+.HP
+\fB\-maxtimeadjustment\fR
+.IP
+Maximum allowed median peer time offset adjustment. Local perspective of
+time may be influenced by outbound peers forward or backward by
+this amount (default: 4200 seconds).
+.HP
+\fB\-maxuploadtarget=\fR<n>
+.IP
+Tries to keep outbound traffic under the given target per 24h. Limit
+does not apply to peers with 'download' permission or blocks
+created within past week. 0 = no limit (default: 0M). Optional
+suffix units [k|K|m|M|g|G|t|T] (default: M). Lowercase is 1000
+base while uppercase is 1024 base
+.HP
+\fB\-natpmp\fR
+.IP
+Use NAT\-PMP to map the listening port (default: 0)
+.HP
+\fB\-networkactive\fR
+.IP
+Enable all P2P network activity (default: 1). Can be changed by the
+setnetworkactive RPC command
+.HP
+\fB\-onion=\fR<ip:port>
+.IP
+Use separate SOCKS5 proxy to reach peers via Tor onion services, set
+\fB\-noonion\fR to disable (default: \fB\-proxy\fR)
+.HP
+\fB\-onlynet=\fR<net>
+.IP
+Make automatic outbound connections only to network <net> (ipv4, ipv6,
+onion, i2p, cjdns). Inbound and manual connections are not
+affected by this option. It can be specified multiple times to
+allow multiple networks.
+.HP
+\fB\-peerblockfilters\fR
+.IP
+Serve compact block filters to peers per BIP 157 (default: 0)
+.HP
+\fB\-peerbloomfilters\fR
+.IP
+Support filtering of blocks and transaction with bloom filters (default:
+0)
+.HP
+\fB\-port=\fR<port>
+.IP
+Listen for connections on <port>. Nodes not using the default ports
+(default: 8333, testnet: 18333, signet: 38333, regtest: 18444)
+are unlikely to get incoming connections. Not relevant for I2P
+(see doc/i2p.md).
+.HP
+\fB\-proxy=\fR<ip:port>
+.IP
+Connect through SOCKS5 proxy, set \fB\-noproxy\fR to disable (default:
+disabled)
+.HP
+\fB\-proxyrandomize\fR
+.IP
+Randomize credentials for every proxy connection. This enables Tor
+stream isolation (default: 1)
+.HP
+\fB\-seednode=\fR<ip>
+.IP
+Connect to a node to retrieve peer addresses, and disconnect. This
+option can be specified multiple times to connect to multiple
+nodes.
+.HP
+\fB\-timeout=\fR<n>
+.IP
+Specify socket connection timeout in milliseconds. If an initial attempt
+to connect is unsuccessful after this amount of time, drop it
+(minimum: 1, default: 5000)
+.HP
+\fB\-torcontrol=\fR<ip>:<port>
+.IP
+Tor control host and port to use if onion listening enabled (default:
+127.0.0.1:9051). If no port is specified, the default port of
+9051 will be used.
+.HP
+\fB\-torpassword=\fR<pass>
+.IP
+Tor control port password (default: empty)
+.HP
+\fB\-upnp\fR
+.IP
+Use UPnP to map the listening port (default: 1 when listening and no
+\fB\-proxy\fR)
+.HP
+\fB\-v2transport\fR
+.IP
+Support v2 transport (default: 0)
+.HP
+\fB\-whitebind=\fR<[permissions@]addr>
+.IP
+Bind to the given address and add permission flags to the peers
+connecting to it. Use [host]:port notation for IPv6. Allowed
+permissions: bloomfilter (allow requesting BIP37 filtered blocks
+and transactions), noban (do not ban for misbehavior; implies
+download), forcerelay (relay transactions that are already in the
+mempool; implies relay), relay (relay even in \fB\-blocksonly\fR mode,
+and unlimited transaction announcements), mempool (allow
+requesting BIP35 mempool contents), download (allow getheaders
+during IBD, no disconnect after maxuploadtarget limit), addr
+(responses to GETADDR avoid hitting the cache and contain random
+records with the most up\-to\-date info). Specify multiple
+permissions separated by commas (default:
+download,noban,mempool,relay). Can be specified multiple times.
+.HP
+\fB\-whitelist=\fR<[permissions@]IP address or network>
+.IP
+Add permission flags to the peers connecting from the given IP address
+(e.g. 1.2.3.4) or CIDR\-notated network (e.g. 1.2.3.0/24). Uses
+the same permissions as \fB\-whitebind\fR. Can be specified multiple
+times.
+.PP
+Wallet options:
+.HP
+\fB\-addresstype\fR
+.IP
+What type of addresses to use ("legacy", "p2sh\-segwit", "bech32", or
+"bech32m", default: "bech32")
+.HP
+\fB\-avoidpartialspends\fR
+.IP
+Group outputs by address, selecting many (possibly all) or none, instead
+of selecting on a per\-output basis. Privacy is improved as
+addresses are mostly swept with fewer transactions and outputs
+are aggregated in clean change addresses. It may result in higher
+fees due to less optimal coin selection caused by this added
+limitation and possibly a larger\-than\-necessary number of inputs
+being used. Always enabled for wallets with "avoid_reuse"
+enabled, otherwise default: 0.
+.HP
+\fB\-changetype\fR
+.IP
+What type of change to use ("legacy", "p2sh\-segwit", "bech32", or
+"bech32m"). Default is "legacy" when \fB\-addresstype\fR=\fI\,legacy\/\fR, else it
+is an implementation detail.
+.HP
+\fB\-consolidatefeerate=\fR<amt>
+.IP
+The maximum feerate (in BTC/kvB) at which transaction building may use
+more inputs than strictly necessary so that the wallet's UTXO
+pool can be reduced (default: 0.0001).
+.HP
+\fB\-disablewallet\fR
+.IP
+Do not load the wallet and disable wallet RPC calls
+.HP
+\fB\-discardfee=\fR<amt>
+.IP
+The fee rate (in BTC/kvB) that indicates your tolerance for discarding
+change by adding it to the fee (default: 0.0001). Note: An output
+is discarded if it is dust at this rate, but we will always
+discard up to the dust relay fee and a discard fee above that is
+limited by the fee estimate for the longest target
+.HP
+\fB\-fallbackfee=\fR<amt>
+.IP
+A fee rate (in BTC/kvB) that will be used when fee estimation has
+insufficient data. 0 to entirely disable the fallbackfee feature.
+(default: 0.00)
+.HP
+\fB\-keypool=\fR<n>
+.IP
+Set key pool size to <n> (default: 1000). Warning: Smaller sizes may
+increase the risk of losing funds when restoring from an old
+backup, if none of the addresses in the original keypool have
+been used.
+.HP
+\fB\-maxapsfee=\fR<n>
+.IP
+Spend up to this amount in additional (absolute) fees (in BTC) if it
+allows the use of partial spend avoidance (default: 0.00)
+.HP
+\fB\-mintxfee=\fR<amt>
+.IP
+Fee rates (in BTC/kvB) smaller than this are considered zero fee for
+transaction creation (default: 0.00001)
+.HP
+\fB\-paytxfee=\fR<amt>
+.IP
+Fee rate (in BTC/kvB) to add to transactions you send (default: 0.00)
+.HP
+\fB\-signer=\fR<cmd>
+.IP
+External signing tool, see doc/external\-signer.md
+.HP
+\fB\-spendzeroconfchange\fR
+.IP
+Spend unconfirmed change when sending transactions (default: 1)
+.HP
+\fB\-txconfirmtarget=\fR<n>
+.IP
+If paytxfee is not set, include enough fee so transactions begin
+confirmation on average within n blocks (default: 6)
+.HP
+\fB\-wallet=\fR<path>
+.IP
+Specify wallet path to load at startup. Can be used multiple times to
+load multiple wallets. Path is to a directory containing wallet
+data and log files. If the path is not absolute, it is
+interpreted relative to <walletdir>. This only loads existing
+wallets and does not create new ones. For backwards compatibility
+this also accepts names of existing top\-level data files in
+<walletdir>.
+.HP
+\fB\-walletbroadcast\fR
+.IP
+Make the wallet broadcast transactions (default: 1)
+.HP
+\fB\-walletdir=\fR<dir>
+.IP
+Specify directory to hold wallets (default: <datadir>/wallets if it
+exists, otherwise <datadir>)
+.HP
+\fB\-walletnotify=\fR<cmd>
+.IP
+Execute command when a wallet transaction changes. %s in cmd is replaced
+by TxID, %w is replaced by wallet name, %b is replaced by the
+hash of the block including the transaction (set to 'unconfirmed'
+if the transaction is not included) and %h is replaced by the
+block height (\fB\-1\fR if not included). %w is not currently
+implemented on windows. On systems where %w is supported, it
+should NOT be quoted because this would break shell escaping used
+to invoke the command.
+.HP
+\fB\-walletrbf\fR
+.IP
+Send transactions with full\-RBF opt\-in enabled (RPC only, default: 1)
+.PP
+ZeroMQ notification options:
+.HP
+\fB\-zmqpubhashblock=\fR<address>
+.IP
+Enable publish hash block in <address>
+.HP
+\fB\-zmqpubhashblockhwm=\fR<n>
+.IP
+Set publish hash block outbound message high water mark (default: 1000)
+.HP
+\fB\-zmqpubhashtx=\fR<address>
+.IP
+Enable publish hash transaction in <address>
+.HP
+\fB\-zmqpubhashtxhwm=\fR<n>
+.IP
+Set publish hash transaction outbound message high water mark (default:
+1000)
+.HP
+\fB\-zmqpubrawblock=\fR<address>
+.IP
+Enable publish raw block in <address>
+.HP
+\fB\-zmqpubrawblockhwm=\fR<n>
+.IP
+Set publish raw block outbound message high water mark (default: 1000)
+.HP
+\fB\-zmqpubrawtx=\fR<address>
+.IP
+Enable publish raw transaction in <address>
+.HP
+\fB\-zmqpubrawtxhwm=\fR<n>
+.IP
+Set publish raw transaction outbound message high water mark (default:
+1000)
+.HP
+\fB\-zmqpubsequence=\fR<address>
+.IP
+Enable publish hash block and tx sequence in <address>
+.HP
+\fB\-zmqpubsequencehwm=\fR<n>
+.IP
+Set publish hash sequence message high water mark (default: 1000)
+.PP
+Debugging/Testing options:
+.HP
+\fB\-debug=\fR<category>
+.IP
+Output debug and trace logging (default: \fB\-nodebug\fR, supplying <category>
+is optional). If <category> is not supplied or if <category> = 1,
+output all debug and trace logging. <category> can be: addrman,
+bench, blockstorage, cmpctblock, coindb, estimatefee, http, i2p,
+ipc, leveldb, libevent, mempool, mempoolrej, net, proxy, prune,
+qt, rand, reindex, rpc, scan, selectcoins, tor, txpackages,
+txreconciliation, util, validation, walletdb, zmq. This option
+can be specified multiple times to output multiple categories.
+.HP
+\fB\-debugexclude=\fR<category>
+.IP
+Exclude debug and trace logging for a category. Can be used in
+conjunction with \fB\-debug\fR=\fI\,1\/\fR to output debug and trace logging for
+all categories except the specified category. This option can be
+specified multiple times to exclude multiple categories.
+.HP
+\fB\-help\-debug\fR
+.IP
+Print help message with debugging options and exit
+.HP
+\fB\-logips\fR
+.IP
+Include IP addresses in debug output (default: 0)
+.HP
+\fB\-logsourcelocations\fR
+.IP
+Prepend debug output with name of the originating source location
+(source file, line number and function name) (default: 0)
+.HP
+\fB\-logthreadnames\fR
+.IP
+Prepend debug output with name of the originating thread (only available
+on platforms supporting thread_local) (default: 0)
+.HP
+\fB\-logtimestamps\fR
+.IP
+Prepend debug output with timestamp (default: 1)
+.HP
+\fB\-maxtxfee=\fR<amt>
+.IP
+Maximum total fees (in BTC) to use in a single wallet transaction;
+setting this too low may abort large transactions (default: 0.10)
+.HP
+\fB\-printtoconsole\fR
+.IP
+Send trace/debug info to console (default: 1 when no \fB\-daemon\fR. To disable
+logging to file, set \fB\-nodebuglogfile\fR)
+.HP
+\fB\-shrinkdebugfile\fR
+.IP
+Shrink debug.log file on client startup (default: 1 when no \fB\-debug\fR)
+.HP
+\fB\-uacomment=\fR<cmt>
+.IP
+Append comment to the user agent string
+.PP
+Chain selection options:
+.HP
+\fB\-chain=\fR<chain>
+.IP
+Use the chain <chain> (default: main). Allowed values: main, test,
+signet, regtest
+.HP
+\fB\-signet\fR
+.IP
+Use the signet chain. Equivalent to \fB\-chain\fR=\fI\,signet\/\fR. Note that the network
+is defined by the \fB\-signetchallenge\fR parameter
+.HP
+\fB\-signetchallenge\fR
+.IP
+Blocks must satisfy the given script to be considered valid (only for
+signet networks; defaults to the global default signet test
+network challenge)
+.HP
+\fB\-signetseednode\fR
+.IP
+Specify a seed node for the signet network, in the hostname[:port]
+format, e.g. sig.net:1234 (may be used multiple times to specify
+multiple seed nodes; defaults to the global default signet test
+network seed node(s))
+.HP
+\fB\-testnet\fR
+.IP
+Use the test chain. Equivalent to \fB\-chain\fR=\fI\,test\/\fR.
+.PP
+Node relay options:
+.HP
+\fB\-bytespersigop\fR
+.IP
+Equivalent bytes per sigop in transactions for relay and mining
+(default: 20)
+.HP
+\fB\-datacarrier\fR
+.IP
+Relay and mine data carrier transactions (default: 1)
+.HP
+\fB\-datacarriersize\fR
+.IP
+Relay and mine transactions whose data\-carrying raw scriptPubKey is of
+this size or less (default: 83)
+.HP
+\fB\-mempoolfullrbf\fR
+.IP
+Accept transaction replace\-by\-fee without requiring replaceability
+signaling (default: 0)
+.HP
+\fB\-minrelaytxfee=\fR<amt>
+.IP
+Fees (in BTC/kvB) smaller than this are considered zero fee for
+relaying, mining and transaction creation (default: 0.00001)
+.HP
+\fB\-permitbaremultisig\fR
+.IP
+Relay non\-P2SH multisig (default: 1)
+.HP
+\fB\-whitelistforcerelay\fR
+.IP
+Add 'forcerelay' permission to whitelisted inbound peers with default
+permissions. This will relay transactions even if the
+transactions were already in the mempool. (default: 0)
+.HP
+\fB\-whitelistrelay\fR
+.IP
+Add 'relay' permission to whitelisted inbound peers with default
+permissions. This will accept relayed transactions even when not
+relaying transactions (default: 1)
+.PP
+Block creation options:
+.HP
+\fB\-blockmaxweight=\fR<n>
+.IP
+Set maximum BIP141 block weight (default: 3996000)
+.HP
+\fB\-blockmintxfee=\fR<amt>
+.IP
+Set lowest fee rate (in BTC/kvB) for transactions to be included in
+block creation. (default: 0.00001)
+.PP
+RPC server options:
+.HP
+\fB\-rest\fR
+.IP
+Accept public REST requests (default: 0)
+.HP
+\fB\-rpcallowip=\fR<ip>
+.IP
+Allow JSON\-RPC connections from specified source. Valid values for <ip>
+are a single IP (e.g. 1.2.3.4), a network/netmask (e.g.
+1.2.3.4/255.255.255.0), a network/CIDR (e.g. 1.2.3.4/24), all
+ipv4 (0.0.0.0/0), or all ipv6 (::/0). This option can be
+specified multiple times
+.HP
+\fB\-rpcauth=\fR<userpw>
+.IP
+Username and HMAC\-SHA\-256 hashed password for JSON\-RPC connections. The
+field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
+canonical python script is included in share/rpcauth. The client
+then connects normally using the
+rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
+option can be specified multiple times
+.HP
+\fB\-rpcbind=\fR<addr>[:port]
+.IP
+Bind to given address to listen for JSON\-RPC connections. Do not expose
+the RPC server to untrusted networks such as the public internet!
+This option is ignored unless \fB\-rpcallowip\fR is also passed. Port is
+optional and overrides \fB\-rpcport\fR. Use [host]:port notation for
+IPv6. This option can be specified multiple times (default:
+127.0.0.1 and ::1 i.e., localhost)
+.HP
+\fB\-rpccookiefile=\fR<loc>
+.IP
+Location of the auth cookie. Relative paths will be prefixed by a
+net\-specific datadir location. (default: data dir)
+.HP
+\fB\-rpcpassword=\fR<pw>
+.IP
+Password for JSON\-RPC connections
+.HP
+\fB\-rpcport=\fR<port>
+.IP
+Listen for JSON\-RPC connections on <port> (default: 8332, testnet:
+18332, signet: 38332, regtest: 18443)
+.HP
+\fB\-rpcserialversion\fR
+.IP
+Sets the serialization of raw transaction or block hex returned in
+non\-verbose mode, non\-segwit(0) (DEPRECATED) or segwit(1)
+(default: 1)
+.HP
+\fB\-rpcthreads=\fR<n>
+.IP
+Set the number of threads to service RPC calls (default: 4)
+.HP
+\fB\-rpcuser=\fR<user>
+.IP
+Username for JSON\-RPC connections
+.HP
+\fB\-rpcwhitelist=\fR<whitelist>
+.IP
+Set a whitelist to filter incoming RPC calls for a specific user. The
+field <whitelist> comes in the format: <USERNAME>:<rpc 1>,<rpc
+2>,...,<rpc n>. If multiple whitelists are set for a given user,
+they are set\-intersected. See \fB\-rpcwhitelistdefault\fR documentation
+for information on default whitelist behavior.
+.HP
+\fB\-rpcwhitelistdefault\fR
+.IP
+Sets default behavior for rpc whitelisting. Unless rpcwhitelistdefault
+is set to 0, if any \fB\-rpcwhitelist\fR is set, the rpc server acts as
+if all rpc users are subject to empty\-unless\-otherwise\-specified
+whitelists. If rpcwhitelistdefault is set to 1 and no
+\fB\-rpcwhitelist\fR is set, rpc server acts as if all rpc users are
+subject to empty whitelists.
+.HP
+\fB\-server\fR
+.IP
+Accept command line and JSON\-RPC commands
+.SH COPYRIGHT
+Copyright (C) 2009-2023 The Bitcoin Core developers
 
-This is a placeholder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
+Please contribute if you find Bitcoin Core useful. Visit
+<https://bitcoincore.org/> for further information about the software.
+The source code is available from <https://github.com/bitcoin/bitcoin>.
+
+This is experimental software.
+Distributed under the MIT software license, see the accompanying file COPYING
+or <https://opensource.org/licenses/MIT>
\ No newline at end of file