aboutsummaryrefslogtreecommitdiff
path: root/doc/build-osx.md
diff options
context:
space:
mode:
Diffstat (limited to 'doc/build-osx.md')
-rw-r--r--doc/build-osx.md136
1 files changed, 50 insertions, 86 deletions
diff --git a/doc/build-osx.md b/doc/build-osx.md
index 296e0aa1f0..89d7816c9a 100644
--- a/doc/build-osx.md
+++ b/doc/build-osx.md
@@ -1,129 +1,93 @@
Mac OS X Build Instructions and Notes
====================================
-This guide will show you how to build Bitcoin Core for OS X.
-
-Notes
------
-
-* Tested on OS X 10.7 through 10.11 on 64-bit Intel processors only.
-
-* All of the commands should be executed in a Terminal application. The
-built-in one is located in `/Applications/Utilities`.
+The commands in this guide should be executed in a Terminal application.
+The built-in one is located in `/Applications/Utilities/Terminal.app`.
Preparation
-----------
+Download and install [Xcode](https://developer.apple.com/xcode/download).
-You need to install Xcode with all the options checked so that the compiler
-and everything is available in /usr not just /Developer. Xcode should be
-available on your OS X installation media, but if not, you can get the
-current version from https://developer.apple.com/xcode/. If you install
-Xcode 4.3 or later, you'll need to install its command line tools. This can
-be done in `Xcode > Preferences > Downloads > Components` and generally must
-be re-done or updated every time Xcode is updated.
-
-You will also need to install [Homebrew](http://brew.sh) in order to install library
-dependencies.
+Once installed, run `xcode-select --install` to install the OS X command line tools.
-The installation of the actual dependencies is covered in the instructions
-sections below.
+Install [Homebrew](http://brew.sh).
-Instructions: Homebrew
+Dependencies
----------------------
-#### Install dependencies using Homebrew
+ brew install automake berkeley-db4 libtool boost --c++11 miniupnpc openssl pkg-config protobuf --c++11 qt5 libevent
- brew install autoconf automake berkeley-db4 libtool boost miniupnpc openssl pkg-config protobuf qt5 libevent
+NOTE: Building with Qt4 is still supported, however, could result in a broken UI. Building with Qt5 is recommended.
-NOTE: Building with Qt4 is still supported, however, could result in a broken UI. As such, building with Qt5 is recommended.
-
-### Building `bitcoin`
+Build Bitcoin Core
+------------------------
-1. Clone the GitHub tree to get the source code and go into the directory.
+1. Clone the bitcoin source code and cd into `bitcoin`
- git clone https://github.com/bitcoin/bitcoin.git
+ git clone https://github.com/bitcoin/bitcoin
cd bitcoin
2. Build bitcoin-core:
- This will configure and build the headless bitcoin binaries as well as the gui (if Qt is found).
- You can disable the gui build by passing `--without-gui` to configure.
+
+ Configure and build the headless bitcoin binaries as well as the GUI (if Qt is found).
+
+ You can disable the GUI build by passing `--without-gui` to configure.
./autogen.sh
./configure
make
-3. It is also a good idea to build and run the unit tests:
+3. It is recommended to build and run the unit tests:
make check
-4. (Optional) You can also install bitcoind to your path:
-
- make install
-
-Use Qt Creator as IDE
-------------------------
-You can use Qt Creator as IDE, for debugging and for manipulating forms, etc.
-Download Qt Creator from https://www.qt.io/download/. Download the "community edition" and only install Qt Creator (uncheck the rest during the installation process).
-
-1. Make sure you installed everything through Homebrew mentioned above
-2. Do a proper ./configure --enable-debug
-3. In Qt Creator do "New Project" -> Import Project -> Import Existing Project
-4. Enter "bitcoin-qt" as project name, enter src/qt as location
-5. Leave the file selection as it is
-6. Confirm the "summary page"
-7. In the "Projects" tab select "Manage Kits..."
-8. Select the default "Desktop" kit and select "Clang (x86 64bit in /usr/bin)" as compiler
-9. Select LLDB as debugger (you might need to set the path to your installation)
-10. Start debugging with Qt Creator
-
-Creating a release build
-------------------------
-You can ignore this section if you are building `bitcoind` for your own use.
-
-bitcoind/bitcoin-cli binaries are not included in the Bitcoin-Qt.app bundle.
-
-If you are building `bitcoind` or `Bitcoin Core` for others, your build machine should be set up
-as follows for maximum compatibility:
+4. You can also create a .dmg that contains the .app bundle (optional):
-All dependencies should be compiled with these flags:
-
- -mmacosx-version-min=10.7
- -arch x86_64
- -isysroot $(xcode-select --print-path)/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.7.sdk
-
-Once dependencies are compiled, see [doc/release-process.md](release-process.md) for how the Bitcoin Core
-bundle is packaged and signed to create the .dmg disk image that is distributed.
+ make deploy
Running
-------
-It's now available at `./bitcoind`, provided that you are still in the `src`
-directory. We have to first create the RPC configuration file, though.
+Bitcoin Core is now available at `./src/bitcoind`
-Run `./bitcoind` to get the filename where it should be put, or just try these
-commands:
+Before running, it's recommended you create an RPC configuration file.
echo -e "rpcuser=bitcoinrpc\nrpcpassword=$(xxd -l 16 -p /dev/urandom)" > "/Users/${USER}/Library/Application Support/Bitcoin/bitcoin.conf"
+
chmod 600 "/Users/${USER}/Library/Application Support/Bitcoin/bitcoin.conf"
-The next time you run it, it will start downloading the blockchain, but it won't
-output anything while it's doing this. This process may take several hours;
-you can monitor its process by looking at the debug.log file, like this:
+The first time you run bitcoind, it will start downloading the blockchain. This process could take several hours.
+
+You can monitor the download process by looking at the debug.log file:
tail -f $HOME/Library/Application\ Support/Bitcoin/debug.log
Other commands:
-------
- ./bitcoind -daemon # to start the bitcoin daemon.
- ./bitcoin-cli --help # for a list of command-line options.
- ./bitcoin-cli help # When the daemon is running, to get a list of RPC commands
+ ./src/bitcoind -daemon # Starts the bitcoin daemon.
+ ./src/bitcoin-cli --help # Outputs a list of command-line options.
+ ./src/bitcoin-cli help # Outputs a list of RPC commands when the daemon is running.
+
+Using Qt Creator as IDE
+------------------------
+You can use Qt Creator as an IDE, for bitcoin development.
+Download and install the community edition of [Qt Creator](https://www.qt.io/download/).
+Uncheck everything except Qt Creator during the installation process.
-Using Qt official installer while building
-------------------------------------------
+1. Make sure you installed everything through Homebrew mentioned above
+2. Do a proper ./configure --enable-debug
+3. In Qt Creator do "New Project" -> Import Project -> Import Existing Project
+4. Enter "bitcoin-qt" as project name, enter src/qt as location
+5. Leave the file selection as it is
+6. Confirm the "summary page"
+7. In the "Projects" tab select "Manage Kits..."
+8. Select the default "Desktop" kit and select "Clang (x86 64bit in /usr/bin)" as compiler
+9. Select LLDB as debugger (you might need to set the path to your installation)
+10. Start debugging with Qt Creator
+
+Notes
+-----
+
+* Tested on OS X 10.7 through 10.11 on 64-bit Intel processors only.
-If you prefer to use the latest Qt installed from the official binary
-installer over the brew version, you have to make several changes to
-the installed tree and its binaries (all these changes are contained
-in the brew version already). The changes needed are described in
-[#7714](https://github.com/bitcoin/bitcoin/issues/7714). We do not
-support building Bitcoin Core this way though.
+* Building with downloaded Qt binaries is not officially supported. See the notes in [#7714](https://github.com/bitcoin/bitcoin/issues/7714)