3 files changed, 28 insertions, 135 deletions
diff --git a/doc/README b/doc/README
index 789cc9fb87..01b1d40050 100644
--- a/doc/README
+++ b/doc/README
@@ -1,4 +1,4 @@
-Bitcoin 0.4.1 BETA
+Bitcoin 0.5.0 BETA
 
 Copyright (c) 2009-2011 Bitcoin Developers
 Distributed under the MIT/X11 software license, see the accompanying
@@ -19,99 +19,12 @@ with each other, with the help of a P2P network to check for double-spending.
 Setup
 -----
 Unpack the files into a directory and run:
- bin/32/bitcoin (GUI, 32-bit)
+ bin/32/bitcoin-qt (GUI, 32-bit)
  bin/32/bitcoind (headless, 32-bit)
- bin/64/bitcoin (GUI, 64-bit)
+ bin/64/bitcoin-qt (GUI, 64-bit)
  bin/64/bitcoind (headless, 64-bit)
 
 
-Wallet Encryption
------------------
-Bitcoin supports native wallet encryption so that people who steal your
-wallet file don't automatically get access to all of your Bitcoins.
-In order to enable this feature, chose "Encrypt Wallet" from the
-Options menu.  You will be prompted to enter a passphrase, which
-will be used as the key to encrypt your wallet and will be needed
-every time you wish to send Bitcoins.  If you lose this passphrase,
-you will lose access to spend all of the bitcoins in your wallet,
-no one, not even the Bitcoin developers can recover your Bitcoins.
-This means you are responsible for your own security, store your
-passphrase in a secure location and do not forget it.
-
-Remember that the encryption built into bitcoin only encrypts the
-actual keys which are required to send your bitcoins, not the full
-wallet.  This means that someone who steals your wallet file will
-be able to see all the addresses which belong to you, as well as the
-relevant transactions, you are only protected from someone spending
-your coins.
-
-It is recommended that you backup your wallet file before you
-encrypt your wallet.  To do this, close the Bitcoin client and
-copy the wallet.dat file from ~/.bitcoin/ on Linux, /Users/(user
-name)/Application Support/Bitcoin/ on Mac OSX, and %APPDATA%/Bitcoin/
-on Windows (that is /Users/(user name)/AppData/Roaming/Bitcoin on
-Windows Vista and 7 and /Documents and Settings/(user name)/Application
-Data/Bitcoin on Windows XP).  Once you have copied that file to a
-safe location, reopen the Bitcoin client and Encrypt your wallet.
-If everything goes fine, delete the backup and enjoy your encrypted
-wallet.  Note that once you encrypt your wallet, you will never be
-able to go back to a version of the Bitcoin client older than 0.4.
-
-Keep in mind that you are always responsible for your own security.
-All it takes is a slightly more advanced wallet-stealing trojan which
-installs a keylogger to steal your wallet passphrase as you enter it
-in addition to your wallet file and you have lost all your Bitcoins.
-Wallet encryption cannot keep you safe if you do not practice
-good security, such as running up-to-date antivirus software, only
-entering your wallet passphrase in the Bitcoin client and using the
-same passphrase only as your wallet passphrase.
-
-
-Technical details of wallet encryption
---------------------------------------
-Wallet encryption uses AES-256-CBC to encrypt only the private keys
-that are held in a wallet.  The keys are encrypted with a master key
-which is entirely random.  This master key is then encrypted with
-AES-256-CBC with a key derived from the passphrase using SHA512 and
-OpenSSL's EVP_BytesToKey and a dynamic number of rounds determined by
-the speed of the machine which does the initial encryption (and is
-updated based on the speed of a computer which does a subsequent
-passphrase change).  Although the underlying code supports multiple
-encrypted copies of the same master key (and thus multiple passphrases)
-the client does not yet have a method to add additional passphrases.
-
-At runtime, the client loads the wallet as it normally would, however
-the keystore stores the keys in encrypted form.  When the passphrase
-is required (to top up keypool or send coins) it will either be queried
-by a GUI prompt, or must first be entered with the walletpassphrase
-RPC command.  This will change the wallet to "unlocked" state where the
-unencrypted master key is stored in memory (in the case of GUI, only for
-long enough to complete the requested operation, in RPC, for as long as
-is specified by the second parameter to walletpassphrase).  The wallet is
-then locked (or can be manually locked using the walletlock RPC command)
-and the unencrypted master key is removed from memory.
-
-Implementation details of wallet encryption
--------------------------------------------
-When the wallet is locked, calls to sendtoaddress, sendfrom, sendmany,
-and keypoolrefill will return Error -13: "Error: Please enter the wallet 
-passphrase with walletpassphrase first."
-
-When the wallet is unlocked, calls to walletpassphrase will fail.
-
-When a wallet is encrypted, the passphrase is required to top up the
-keypool, thus, if the passphrase is rarely entered, it is possible that
-keypool might run out.  In this case, the default key will be used as the
-target for payouts for mining, and calls to getnewaddress and getaccount
-address will return an error.  In order to prevent such cases, the keypool
-is automatically refilled when walletpassphrase is called with a correct
-passphrase and when topupkeypool is called (while the wallet is unlocked).
-Note that the keypool continues to be topped up on various occasions when
-a new key from pool is used and the wallet is unlocked (or unencrypted).
-
-
-
 See the documentation at the bitcoin wiki:
   https://en.bitcoin.it/wiki/Main_Page
-
-... for help and more information.
+for help and more information.
diff --git a/doc/README_windows.txt b/doc/README_windows.txt
index 7ff8834920..ea2f14c42a 100644
--- a/doc/README_windows.txt
+++ b/doc/README_windows.txt
@@ -1,4 +1,4 @@
-Bitcoin 0.4.1 BETA
+Bitcoin 0.5.0 BETA
 
 Copyright (c) 2009-2011 Bitcoin Developers
 Distributed under the MIT/X11 software license, see the accompanying
@@ -18,7 +18,7 @@ with each other, with the help of a P2P network to check for double-spending.
 
 Setup
 -----
-Unpack the files into a directory and run bitcoin.exe.
+Unpack the files into a directory and run bitcoin-qt.exe.
 
 If you have Microsoft Security Essentials, you need to add bitcoin.exe to its
 "Excluded processes" list.  Microsoft Security Essentials->Settings tab,
@@ -27,8 +27,9 @@ select Excluded processes, press Add, select bitcoin.exe, OK, Save changes.
 The software automatically finds other nodes to connect to.  You can
 enable Universal Plug and Play using a menu entry or set your firewall
 to forward port 8333 (TCP) to your computer so you can receive
-incoming connections.  Bitcoin work without incoming connections,
+incoming connections.  Bitcoin works without incoming connections,
 but allowing incoming connections helps the Bitcoin network.
 
-See the bitcoin wiki at:  https://en.bitcoin.it/wiki/Main_Page
+See the bitcoin wiki at:
+  https://en.bitcoin.it/wiki/Main_Page
 for more help and information.
diff --git a/doc/release-process.txt b/doc/release-process.txt
index 4d06627006..ceff72483d 100644
--- a/doc/release-process.txt
+++ b/doc/release-process.txt
@@ -5,65 +5,55 @@
 * update (commit) version in OSX app bundle
  contrib/Bitcoin.app/Contents/Info.plist
 
-  * CFBundleShortVersionString should have value like 0.3.23
-  * CFBundleVersion should have value like 323
+  * CFBundleShortVersionString should have value like 0.5.0
+  * CFBundleVersion should have value like 500
 
 * tag version in git
 
-  $ git tag -a v0.3.23
+  $ git tag -a v0.5.0
 
 * write release notes.  git shortlog helps a lot:
 
-  $ git shortlog --no-merges v0.3.22..
+  $ git shortlog --no-merges v0.4.0..
 
 * create source-only archive
 
-  $ git archive --format=tar --prefix=bitcoin-0.3.23/ HEAD | \
-  	gzip -9c > ~/tmp/bitcoin-0.3.23-src.tar.gz 
+  $ git archive --format=tar --prefix=bitcoin-0.5.0/ HEAD | \
+  	gzip -9c > ~/tmp/bitcoin-0.5.0-src.tar.gz 
 
 * perform gitian builds
 
   * From a directory containing the bitcoin source, gitian-builder and gitian.sigs
-  $ export VERSION=0.3.23
+  $ export VERSION=0.5.0
   $ cd ./gitian-builder
   $ ./bin/gbuild --commit bitcoin=v$VERSION ../bitcoin/contrib/gitian-descriptors/gitian.yml
   $ ./bin/gsign --signer (your gitian key, ie bluematt, sipa, etc) --release $VERSION --destination ../gitian.sigs/ ../bitcoin/contrib/gitian-descriptors/gitian.yml
   $ cd build/out
   $ zip bitcoin-$VERSION-linux-gitian.zip *
   $ mv bitcoin-$VERSION-linux-gitian.zip ../../
-  $ ./bin/gbuild --commit bitcoin=v$VERSION ../bitcoin/contrib/gitian-descriptors/gitian-win32.yml
-  $ ./bin/gsign --signer (your gitian key, ie bluematt, sipa, etc) --release $VERSION-win32 --destination ../gitian.sigs/ ../bitcoin/contrib/gitian-descriptors/gitian-win32.yml
-  $ cd build/out
-  $ zip bitcoin-$VERSION-win32-gitian.zip *
-  $ mv bitcoin-$VERSION-win32-gitian.zip ../../
- 
+
+  * NOTE: gitian cross-compiled builds for Windows is broken, we are building
+    Windows binaries using a public Amazon AWS instance for this release.
+
   Build output expected:
   1. linux 32-bit and 64-bit binaries + source (bitcoin-$VERSION-linux-gitian.zip)
-  2. windows 32-bit binary, installer + source (bitcoin-$VERSION-win32-gitian.zip)
-  3. Gitian signatures (in gitian.sigs/$VERSION[-win32]/(your gitian key)/
+  2. Gitian signatures (in gitian.sigs/$VERSION[-win32]/(your gitian key)/
 
 * repackage gitian builds for release as stand-alone zip/tar/installer exe
 
-  * Windows .zip and setup.exe:
-  $ mkdir bitcoin-$VERSION-win32
-  $ cd bitcoin-$VERSION-win32
-  $ unzip bitcoin-$VERSION-win32-gitian.zip
-  $ mv bitcoin-$VERSION-win32-setup.exe ..
-  $ cd ..; zip bitcoin-$VERSION-win32.zip bitcoin-$VERSION-win32
-
   * Linux .tar.gz:
   $ mkdir bitcoin-$VERSION-linux
   $ cd bitcoin-$VERSION-linux
   $ unzip bitcoin-$VERSION-linux-gitian.zip
   $ cd ..; tar czvf bitcoin-$VERSION-linux.tar.gz bitcoin-$VERSION-linux
 
+* Compile Windows .zip and setup.exe on Amazon EC2 instance
+  TODO: document process
+
 * perform Mac build
-  * From the bitcoin source dir
-  $ cd contrib
-  $ ./create_osx_dmg.sh
-  $ mv Bitcoin.dmg bitcoin-$VERSION-macosx.dmg
+  TODO: document process
 
-* upload source and builds to SF
+* upload source and builds to SourceForge
 
 * create SHA1SUMS for builds, and PGP-sign it
 
@@ -80,18 +70,7 @@
   * Collect enough gitian signatures to meet minimum_weight (see contrib/gitian-downloader/*-download-config)
 
   * From a directory containing bitcoin source, gitian.sigs and gitian zips
-  $ export VERSION=0.3.23
-  $ mkdir bitcoin-$VERSION-win32-gitian; cd bitcoin-$VERSION-win32-gitian
-  $ unzip ../bitcoin-$VERSION-win32-gitian.zip
-  $ mkdir gitian
-  $ cp ../bitcoin/contrib/gitian-downloader/*.pgp ./gitian/
-  $ for file in `ls ../gitian.sigs/$VERSION-win32/`; do
-  $   cp ../gitian.sigs/$VERSION-win32/$file/bitcoin-build.assert ./gitian/$file-build.assert
-  $   cp ../gitian.sigs/$VERSION-win32/$file/bitcoin-build.assert.sig ./gitian/$file-build.assert.sig
-  $ done
-  $ zip bitcoin-$VERSION-win32-gitian.zip *
-  $ cp bitcoin-$VERSION-win32-gitian.zip ../
-  $ cd ..
+  $ export VERSION=0.5.0
   $ mkdir bitcoin-$VERSION-linux-gitian; cd bitcoin-$VERSION-linux-gitian
   $ unzip ../bitcoin-$VERSION-linux-gitian.zip
   $ mkdir gitian
@@ -103,6 +82,6 @@
   $ zip bitcoin-$VERSION-linux-gitian.zip *
   $ cp bitcoin-$VERSION-linux-gitian.zip ../
 
-  * Upload gitian zips to SF
+  * Upload gitian zips to SourceForge