diff options
36 files changed, 202 insertions, 197 deletions
diff --git a/test/functional/abandonconflict.py b/test/functional/abandonconflict.py index c87c02492d..1db04337a9 100755 --- a/test/functional/abandonconflict.py +++ b/test/functional/abandonconflict.py @@ -74,7 +74,7 @@ class AbandonConflictTest(BitcoinTestFramework): # Restart the node with a higher min relay fee so the parent tx is no longer in mempool # TODO: redo with eviction self.stop_node(0) - self.nodes[0] = self.start_node(0, self.options.tmpdir, ["-minrelaytxfee=0.0001"]) + self.start_node(0, extra_args=["-minrelaytxfee=0.0001"]) # Verify txs no longer in either node's mempool assert_equal(len(self.nodes[0].getrawmempool()), 0) @@ -101,7 +101,7 @@ class AbandonConflictTest(BitcoinTestFramework): # Verify that even with a low min relay fee, the tx is not reaccepted from wallet on startup once abandoned self.stop_node(0) - self.nodes[0] = self.start_node(0, self.options.tmpdir, ["-minrelaytxfee=0.00001"]) + self.start_node(0, extra_args=["-minrelaytxfee=0.00001"]) assert_equal(len(self.nodes[0].getrawmempool()), 0) assert_equal(self.nodes[0].getbalance(), balance) @@ -121,7 +121,7 @@ class AbandonConflictTest(BitcoinTestFramework): # Remove using high relay fee again self.stop_node(0) - self.nodes[0] = self.start_node(0, self.options.tmpdir, ["-minrelaytxfee=0.0001"]) + self.start_node(0, extra_args=["-minrelaytxfee=0.0001"]) assert_equal(len(self.nodes[0].getrawmempool()), 0) newbalance = self.nodes[0].getbalance() assert_equal(newbalance, balance - Decimal("24.9996")) diff --git a/test/functional/assumevalid.py b/test/functional/assumevalid.py index 9d17faac51..63e6a384a4 100755 --- a/test/functional/assumevalid.py +++ b/test/functional/assumevalid.py @@ -60,10 +60,11 @@ class AssumeValidTest(BitcoinTestFramework): self.num_nodes = 3 def setup_network(self): + self.add_nodes(3, self.options.tmpdir) # Start node0. We don't start the other nodes yet since # we need to pre-mine a block with an invalid transaction # signature so we can pass in the block hash as assumevalid. - self.nodes = [self.start_node(0, self.options.tmpdir)] + self.start_node(0) def send_blocks_until_disconnected(self, node): """Keep sending blocks to the node until we're disconnected.""" @@ -162,15 +163,13 @@ class AssumeValidTest(BitcoinTestFramework): height += 1 # Start node1 and node2 with assumevalid so they accept a block with a bad signature. - self.nodes.append(self.start_node(1, self.options.tmpdir, - ["-assumevalid=" + hex(block102.sha256)])) + self.start_node(1, extra_args=["-assumevalid=" + hex(block102.sha256)]) node1 = BaseNode() # connects to node1 connections.append(NodeConn('127.0.0.1', p2p_port(1), self.nodes[1], node1)) node1.add_connection(connections[1]) node1.wait_for_verack() - self.nodes.append(self.start_node(2, self.options.tmpdir, - ["-assumevalid=" + hex(block102.sha256)])) + self.start_node(2, extra_args=["-assumevalid=" + hex(block102.sha256)]) node2 = BaseNode() # connects to node2 connections.append(NodeConn('127.0.0.1', p2p_port(2), self.nodes[2], node2)) node2.add_connection(connections[2]) diff --git a/test/functional/bip9-softforks.py b/test/functional/bip9-softforks.py index f00232c9ff..ad16482550 100755 --- a/test/functional/bip9-softforks.py +++ b/test/functional/bip9-softforks.py @@ -241,6 +241,7 @@ class BIP9SoftForksTest(ComparisonTestFramework): # Restart all self.test.clear_all_connections() self.stop_nodes() + self.nodes = [] shutil.rmtree(self.options.tmpdir + "/node0") self.setup_chain() self.setup_network() diff --git a/test/functional/blockchain.py b/test/functional/blockchain.py index 0812e1b0df..a3a6cf2fb8 100755 --- a/test/functional/blockchain.py +++ b/test/functional/blockchain.py @@ -146,7 +146,7 @@ class BlockchainTest(BitcoinTestFramework): pass # The node already shut down before response self.log.debug('Node should stop at this height...') self.nodes[0].process.wait(timeout=BITCOIND_PROC_WAIT_TIMEOUT) - self.nodes[0] = self.start_node(0, self.options.tmpdir) + self.start_node(0) assert_equal(self.nodes[0].getblockcount(), 207) diff --git a/test/functional/bumpfee.py b/test/functional/bumpfee.py index 3c488f609a..59c65f18e8 100755 --- a/test/functional/bumpfee.py +++ b/test/functional/bumpfee.py @@ -34,21 +34,18 @@ class BumpFeeTest(BitcoinTestFramework): super().__init__() self.num_nodes = 2 self.setup_clean_chain = True + self.extra_args = [["-prematurewitness", "-walletprematurewitness", "-walletrbf={}".format(i)] + for i in range(self.num_nodes)] - def setup_network(self, split=False): - extra_args = [["-prematurewitness", "-walletprematurewitness", "-walletrbf={}".format(i)] - for i in range(self.num_nodes)] - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, extra_args) - + def run_test(self): # Encrypt wallet for test_locked_wallet_fails test self.nodes[1].node_encrypt_wallet(WALLET_PASSPHRASE) - self.nodes[1] = self.start_node(1, self.options.tmpdir, extra_args[1]) + self.start_node(1) self.nodes[1].walletpassphrase(WALLET_PASSPHRASE, WALLET_PASSPHRASE_TIMEOUT) connect_nodes_bi(self.nodes, 0, 1) self.sync_all() - def run_test(self): peer_node, rbf_node = self.nodes rbf_node_address = rbf_node.getnewaddress() diff --git a/test/functional/create_cache.py b/test/functional/create_cache.py index 39c4c0f47e..1a5754b3f7 100755 --- a/test/functional/create_cache.py +++ b/test/functional/create_cache.py @@ -18,7 +18,6 @@ class CreateCache(BitcoinTestFramework): # Test network and test nodes are not required: self.num_nodes = 0 - self.nodes = [] def setup_network(self): pass diff --git a/test/functional/dbcrash.py b/test/functional/dbcrash.py index a7fcc411c3..d39369105b 100755 --- a/test/functional/dbcrash.py +++ b/test/functional/dbcrash.py @@ -65,7 +65,8 @@ class ChainstateWriteCrashTest(BitcoinTestFramework): def setup_network(self): # Need a bit of extra time for the nodes to start up for this test - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, self.extra_args, timewait=90) + self.add_nodes(self.num_nodes, self.options.tmpdir, self.extra_args, timewait=90) + self.start_nodes() # Leave them unconnected, we'll use submitblock directly in this test def restart_node(self, node_index, expected_tip): @@ -78,7 +79,7 @@ class ChainstateWriteCrashTest(BitcoinTestFramework): while time.time() - time_start < 120: try: # Any of these RPC calls could throw due to node crash - self.nodes[node_index] = self.start_node(node_index, self.options.tmpdir, self.extra_args[node_index], timewait=90) + self.start_node(node_index) self.nodes[node_index].waitforblock(expected_tip) utxo_hash = self.nodes[node_index].gettxoutsetinfo()['hash_serialized_2'] return utxo_hash diff --git a/test/functional/disconnect_ban.py b/test/functional/disconnect_ban.py index 19723226d3..cc8901c40c 100755 --- a/test/functional/disconnect_ban.py +++ b/test/functional/disconnect_ban.py @@ -68,8 +68,8 @@ class DisconnectBanTest(BitcoinTestFramework): assert_equal(len(self.nodes[1].listbanned()), 3) self.stop_node(1) + self.start_node(1) - self.nodes[1] = self.start_node(1, self.options.tmpdir) listAfterShutdown = self.nodes[1].listbanned() assert_equal("127.0.0.0/24", listAfterShutdown[0]['address']) assert_equal("127.0.0.0/32", listAfterShutdown[1]['address']) diff --git a/test/functional/forknotify.py b/test/functional/forknotify.py index 3bcf0a6795..3a2a927098 100755 --- a/test/functional/forknotify.py +++ b/test/functional/forknotify.py @@ -7,7 +7,6 @@ import os import time from test_framework.test_framework import BitcoinTestFramework -from test_framework.util import * class ForkNotifyTest(BitcoinTestFramework): @@ -17,18 +16,12 @@ class ForkNotifyTest(BitcoinTestFramework): self.setup_clean_chain = False def setup_network(self): - self.nodes = [] self.alert_filename = os.path.join(self.options.tmpdir, "alert.txt") with open(self.alert_filename, 'w', encoding='utf8'): pass # Just open then close to create zero-length file - self.nodes.append(self.start_node(0, self.options.tmpdir, - ["-blockversion=2", "-alertnotify=echo %s >> \"" + self.alert_filename + "\""])) - # Node1 mines block.version=211 blocks - self.nodes.append(self.start_node(1, self.options.tmpdir, - ["-blockversion=211"])) - connect_nodes(self.nodes[1], 0) - - self.sync_all() + self.extra_args = [["-blockversion=2", "-alertnotify=echo %s >> \"" + self.alert_filename + "\""], + ["-blockversion=211"]] + super().setup_network() def run_test(self): # Mine 51 up-version blocks diff --git a/test/functional/fundrawtransaction.py b/test/functional/fundrawtransaction.py index f2f4efcf28..242b6eed10 100755 --- a/test/functional/fundrawtransaction.py +++ b/test/functional/fundrawtransaction.py @@ -449,11 +449,11 @@ class RawTransactionsTest(BitcoinTestFramework): ############################################################ # locked wallet test self.stop_node(0) + self.nodes[1].node_encrypt_wallet("test") self.stop_node(2) self.stop_node(3) - self.nodes[1].node_encrypt_wallet("test") - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir) + self.start_nodes() # This test is not meant to test fee estimation and we'd like # to be sure all txs are sent at a consistent desired feerate for node in self.nodes: diff --git a/test/functional/import-rescan.py b/test/functional/import-rescan.py index 4fc5078217..be52d5c847 100755 --- a/test/functional/import-rescan.py +++ b/test/functional/import-rescan.py @@ -121,7 +121,8 @@ class ImportRescanTest(BitcoinTestFramework): if import_node.prune: extra_args[i] += ["-prune=1"] - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, extra_args) + self.add_nodes(self.num_nodes, self.options.tmpdir, extra_args) + self.start_nodes() for i in range(1, self.num_nodes): connect_nodes(self.nodes[i], 0) diff --git a/test/functional/importmulti.py b/test/functional/importmulti.py index e83e85de13..6aae95549d 100755 --- a/test/functional/importmulti.py +++ b/test/functional/importmulti.py @@ -429,7 +429,7 @@ class ImportMultiTest (BitcoinTestFramework): # restart nodes to check for proper serialization/deserialization of watch only address self.stop_nodes() - self.nodes = self.start_nodes(2, self.options.tmpdir) + self.start_nodes() address_assert = self.nodes[1].validateaddress(watchonly_address) assert_equal(address_assert['iswatchonly'], True) assert_equal(address_assert['ismine'], False) diff --git a/test/functional/keypool-topup.py b/test/functional/keypool-topup.py index 0e0c0ea74b..f14a449b59 100755 --- a/test/functional/keypool-topup.py +++ b/test/functional/keypool-topup.py @@ -35,7 +35,7 @@ class KeypoolRestoreTest(BitcoinTestFramework): self.stop_node(1) shutil.copyfile(self.tmpdir + "/node1/regtest/wallet.dat", self.tmpdir + "/wallet.bak") - self.nodes[1] = self.start_node(1, self.tmpdir, self.extra_args[1]) + self.start_node(1, self.extra_args[1]) connect_nodes_bi(self.nodes, 0, 1) self.log.info("Generate keys for wallet") @@ -61,7 +61,7 @@ class KeypoolRestoreTest(BitcoinTestFramework): self.log.info("Verify keypool is restored and balance is correct") - self.nodes[1] = self.start_node(1, self.tmpdir, self.extra_args[1]) + self.start_node(1, self.extra_args[1]) connect_nodes_bi(self.nodes, 0, 1) self.sync_all() diff --git a/test/functional/keypool.py b/test/functional/keypool.py index 3e7bb0ee07..0f84b5c055 100755 --- a/test/functional/keypool.py +++ b/test/functional/keypool.py @@ -19,7 +19,7 @@ class KeyPoolTest(BitcoinTestFramework): # Encrypt wallet and wait to terminate nodes[0].node_encrypt_wallet('test') # Restart node 0 - nodes[0] = self.start_node(0, self.options.tmpdir) + self.start_node(0) # Keep creating keys addr = nodes[0].getnewaddress() addr_data = nodes[0].validateaddress(addr) diff --git a/test/functional/listtransactions.py b/test/functional/listtransactions.py index f75a8e29cc..9b97028417 100755 --- a/test/functional/listtransactions.py +++ b/test/functional/listtransactions.py @@ -20,11 +20,7 @@ class ListTransactionsTest(BitcoinTestFramework): super().__init__() self.num_nodes = 4 self.setup_clean_chain = False - - def setup_nodes(self): - #This test requires mocktime self.enable_mocktime() - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir) def run_test(self): # Simple send, 0 to 1: diff --git a/test/functional/maxuploadtarget.py b/test/functional/maxuploadtarget.py index 66e5bd29e6..6bd6a9e34f 100755 --- a/test/functional/maxuploadtarget.py +++ b/test/functional/maxuploadtarget.py @@ -147,7 +147,7 @@ class MaxUploadTest(BitcoinTestFramework): #stop and start node 0 with 1MB maxuploadtarget, whitelist 127.0.0.1 self.log.info("Restarting nodes with -whitelist=127.0.0.1") self.stop_node(0) - self.nodes[0] = self.start_node(0, self.options.tmpdir, ["-whitelist=127.0.0.1", "-maxuploadtarget=1", "-blockmaxsize=999000"]) + self.start_node(0, ["-whitelist=127.0.0.1", "-maxuploadtarget=1", "-blockmaxsize=999000"]) #recreate/reconnect a test node test_nodes = [TestNode()] diff --git a/test/functional/mempool_persist.py b/test/functional/mempool_persist.py index 807edeb7a8..dc5a3263ff 100755 --- a/test/functional/mempool_persist.py +++ b/test/functional/mempool_persist.py @@ -63,9 +63,8 @@ class MempoolPersistTest(BitcoinTestFramework): self.log.debug("Stop-start node0 and node1. Verify that node0 has the transactions in its mempool and node1 does not.") self.stop_nodes() - self.nodes = [] - self.nodes.append(self.start_node(0, self.options.tmpdir)) - self.nodes.append(self.start_node(1, self.options.tmpdir)) + self.start_node(0) + self.start_node(1) # Give bitcoind a second to reload the mempool time.sleep(1) wait_until(lambda: len(self.nodes[0].getrawmempool()) == 5) @@ -73,16 +72,14 @@ class MempoolPersistTest(BitcoinTestFramework): self.log.debug("Stop-start node0 with -persistmempool=0. Verify that it doesn't load its mempool.dat file.") self.stop_nodes() - self.nodes = [] - self.nodes.append(self.start_node(0, self.options.tmpdir, ["-persistmempool=0"])) + self.start_node(0, extra_args=["-persistmempool=0"]) # Give bitcoind a second to reload the mempool time.sleep(1) assert_equal(len(self.nodes[0].getrawmempool()), 0) self.log.debug("Stop-start node0. Verify that it has the transactions in its mempool.") self.stop_nodes() - self.nodes = [] - self.nodes.append(self.start_node(0, self.options.tmpdir)) + self.start_node(0) wait_until(lambda: len(self.nodes[0].getrawmempool()) == 5) if __name__ == '__main__': diff --git a/test/functional/multiwallet.py b/test/functional/multiwallet.py index fc6e8e325f..7381a9fd54 100755 --- a/test/functional/multiwallet.py +++ b/test/functional/multiwallet.py @@ -23,17 +23,17 @@ class MultiWalletTest(BitcoinTestFramework): self.stop_node(0) # should not initialize if there are duplicate wallets - self.assert_start_raises_init_error(0, self.options.tmpdir, ['-wallet=w1', '-wallet=w1'], 'Error loading wallet w1. Duplicate -wallet filename specified.') + self.assert_start_raises_init_error(0, ['-wallet=w1', '-wallet=w1'], 'Error loading wallet w1. Duplicate -wallet filename specified.') # should not initialize if wallet file is a directory os.mkdir(os.path.join(self.options.tmpdir, 'node0', 'regtest', 'w11')) - self.assert_start_raises_init_error(0, self.options.tmpdir, ['-wallet=w11'], 'Error loading wallet w11. -wallet filename must be a regular file.') + self.assert_start_raises_init_error(0, ['-wallet=w11'], 'Error loading wallet w11. -wallet filename must be a regular file.') # should not initialize if wallet file is a symlink os.symlink(os.path.join(self.options.tmpdir, 'node0', 'regtest', 'w1'), os.path.join(self.options.tmpdir, 'node0', 'regtest', 'w12')) - self.assert_start_raises_init_error(0, self.options.tmpdir, ['-wallet=w12'], 'Error loading wallet w12. -wallet filename must be a regular file.') + self.assert_start_raises_init_error(0, ['-wallet=w12'], 'Error loading wallet w12. -wallet filename must be a regular file.') - self.nodes[0] = self.start_node(0, self.options.tmpdir, self.extra_args[0]) + self.start_node(0, self.extra_args[0]) w1 = self.nodes[0].get_wallet_rpc("w1") w2 = self.nodes[0].get_wallet_rpc("w2") diff --git a/test/functional/p2p-segwit.py b/test/functional/p2p-segwit.py index 63dfbb8ae6..9189f5ef23 100755 --- a/test/functional/p2p-segwit.py +++ b/test/functional/p2p-segwit.py @@ -1496,7 +1496,7 @@ class SegWitTest(BitcoinTestFramework): # Restart with the new binary self.stop_node(node_id) - self.nodes[node_id] = self.start_node(node_id, self.options.tmpdir) + self.start_node(node_id, extra_args=[]) connect_nodes(self.nodes[0], node_id) sync_blocks(self.nodes) diff --git a/test/functional/p2p-versionbits-warning.py b/test/functional/p2p-versionbits-warning.py index df7e8ce5c1..a7aacf908d 100755 --- a/test/functional/p2p-versionbits-warning.py +++ b/test/functional/p2p-versionbits-warning.py @@ -112,7 +112,7 @@ class VersionBitsWarningTest(BitcoinTestFramework): # Empty out the alert file with open(self.alert_filename, 'w', encoding='utf8') as _: pass - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, self.extra_args) + self.start_nodes() # Connecting one block should be enough to generate an error. self.nodes[0].generate(1) @@ -123,7 +123,7 @@ class VersionBitsWarningTest(BitcoinTestFramework): self.test_versionbits_in_alert_file() # Test framework expects the node to still be running... - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, self.extra_args) + self.start_nodes() if __name__ == '__main__': VersionBitsWarningTest().main() diff --git a/test/functional/proxy_test.py b/test/functional/proxy_test.py index ae6f843ddc..7f5a3810f4 100755 --- a/test/functional/proxy_test.py +++ b/test/functional/proxy_test.py @@ -89,7 +89,8 @@ class ProxyTest(BitcoinTestFramework): ] if self.have_ipv6: args[3] = ['-listen', '-proxy=[%s]:%i' % (self.conf3.addr),'-proxyrandomize=0', '-noonion'] - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, extra_args=args) + self.add_nodes(self.num_nodes, self.options.tmpdir, extra_args=args) + self.start_nodes() def node_test(self, node, proxies, auth, test_onion=True): rv = [] diff --git a/test/functional/pruning.py b/test/functional/pruning.py index 0af91e0658..fe406e89ad 100755 --- a/test/functional/pruning.py +++ b/test/functional/pruning.py @@ -56,6 +56,10 @@ class PruneTest(BitcoinTestFramework): connect_nodes(self.nodes[0], 4) sync_blocks(self.nodes[0:5]) + def setup_nodes(self): + self.add_nodes(self.num_nodes, self.options.tmpdir, self.extra_args, timewait=900) + self.start_nodes() + def create_big_chain(self): # Start by creating some coinbases we can spend later self.nodes[1].generate(200) @@ -98,7 +102,7 @@ class PruneTest(BitcoinTestFramework): # Node 2 stays connected, so it hears about the stale blocks and then reorg's when node0 reconnects # Stopping node 0 also clears its mempool, so it doesn't have node1's transactions to accidentally mine self.stop_node(0) - self.nodes[0]=self.start_node(0, self.options.tmpdir, self.full_node_default_args, timewait=900) + self.start_node(0, extra_args=self.full_node_default_args) # Mine 24 blocks in node 1 for i in range(24): if j == 0: @@ -126,7 +130,7 @@ class PruneTest(BitcoinTestFramework): # Reboot node 1 to clear its mempool (hopefully make the invalidate faster) # Lower the block max size so we don't keep mining all our big mempool transactions (from disconnected blocks) self.stop_node(1) - self.nodes[1] = self.start_node(1, self.options.tmpdir, ["-maxreceivebuffer=20000","-blockmaxsize=5000", "-checkblocks=5", "-disablesafemode"], timewait=900) + self.start_node(1, extra_args=["-maxreceivebuffer=20000","-blockmaxsize=5000", "-checkblocks=5", "-disablesafemode"]) height = self.nodes[1].getblockcount() self.log.info("Current block height: %d" % height) @@ -149,7 +153,7 @@ class PruneTest(BitcoinTestFramework): # Reboot node1 to clear those giant tx's from mempool self.stop_node(1) - self.nodes[1] = self.start_node(1, self.options.tmpdir, ["-maxreceivebuffer=20000","-blockmaxsize=5000", "-checkblocks=5", "-disablesafemode"], timewait=900) + self.start_node(1, extra_args=["-maxreceivebuffer=20000","-blockmaxsize=5000", "-checkblocks=5", "-disablesafemode"]) self.log.info("Generating new longer chain of 300 more blocks") self.nodes[1].generate(300) @@ -227,13 +231,15 @@ class PruneTest(BitcoinTestFramework): def manual_test(self, node_number, use_timestamp): # at this point, node has 995 blocks and has not yet run in prune mode - node = self.nodes[node_number] = self.start_node(node_number, self.options.tmpdir, timewait=900) + self.start_node(node_number) + node = self.nodes[node_number] assert_equal(node.getblockcount(), 995) assert_raises_jsonrpc(-1, "not in prune mode", node.pruneblockchain, 500) - self.stop_node(node_number) # now re-start in manual pruning mode - node = self.nodes[node_number] = self.start_node(node_number, self.options.tmpdir, ["-prune=1"], timewait=900) + self.stop_node(node_number) + self.start_node(node_number, extra_args=["-prune=1"]) + node = self.nodes[node_number] assert_equal(node.getblockcount(), 995) def height(index): @@ -307,7 +313,7 @@ class PruneTest(BitcoinTestFramework): # stop node, start back up with auto-prune at 550MB, make sure still runs self.stop_node(node_number) - self.nodes[node_number] = self.start_node(node_number, self.options.tmpdir, ["-prune=550"], timewait=900) + self.start_node(node_number, extra_args=["-prune=550"]) self.log.info("Success") @@ -315,7 +321,7 @@ class PruneTest(BitcoinTestFramework): # check that the pruning node's wallet is still in good shape self.log.info("Stop and start pruning node to trigger wallet rescan") self.stop_node(2) - self.nodes[2] = self.start_node(2, self.options.tmpdir, ["-prune=550"]) + self.start_node(2, extra_args=["-prune=550"]) self.log.info("Success") # check that wallet loads successfully when restarting a pruned node after IBD. @@ -325,7 +331,7 @@ class PruneTest(BitcoinTestFramework): nds = [self.nodes[0], self.nodes[5]] sync_blocks(nds, wait=5, timeout=300) self.stop_node(5) #stop and start to trigger rescan - self.nodes[5] = self.start_node(5, self.options.tmpdir, ["-prune=550"]) + self.start_node(5, extra_args=["-prune=550"]) self.log.info("Success") def run_test(self): diff --git a/test/functional/receivedby.py b/test/functional/receivedby.py index 19d99c9c9e..b165834169 100755 --- a/test/functional/receivedby.py +++ b/test/functional/receivedby.py @@ -28,11 +28,7 @@ class ReceivedByTest(BitcoinTestFramework): super().__init__() self.num_nodes = 4 self.setup_clean_chain = False - - def setup_nodes(self): - #This test requires mocktime self.enable_mocktime() - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir) def run_test(self): ''' diff --git a/test/functional/reindex.py b/test/functional/reindex.py index b446baa04d..0d2a106592 100755 --- a/test/functional/reindex.py +++ b/test/functional/reindex.py @@ -25,7 +25,7 @@ class ReindexTest(BitcoinTestFramework): blockcount = self.nodes[0].getblockcount() self.stop_nodes() extra_args = [["-reindex-chainstate" if justchainstate else "-reindex", "-checkblockindex=1"]] - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, extra_args) + self.start_nodes(extra_args) while self.nodes[0].getblockcount() < blockcount: time.sleep(0.1) assert_equal(self.nodes[0].getblockcount(), blockcount) diff --git a/test/functional/resendwallettransactions.py b/test/functional/resendwallettransactions.py index 5059aa106e..db6f6eec45 100755 --- a/test/functional/resendwallettransactions.py +++ b/test/functional/resendwallettransactions.py @@ -20,7 +20,7 @@ class ResendWalletTransactionsTest(BitcoinTestFramework): # Should return an empty array if there aren't unconfirmed wallet transactions. self.stop_node(0) - self.nodes[0] = self.start_node(0, self.options.tmpdir) + self.start_node(0, extra_args=[]) assert_equal(self.nodes[0].resendwallettransactions(), []) # Should return an array with the unconfirmed wallet transaction. diff --git a/test/functional/rpcbind_test.py b/test/functional/rpcbind_test.py index 20808207b2..e9d64af204 100755 --- a/test/functional/rpcbind_test.py +++ b/test/functional/rpcbind_test.py @@ -20,10 +20,7 @@ class RPCBindTest(BitcoinTestFramework): self.num_nodes = 1 def setup_network(self): - pass - - def setup_nodes(self): - pass + self.add_nodes(self.num_nodes, self.options.tmpdir, None) def run_bind_test(self, allow_ips, connect_to, addresses, expected): ''' @@ -31,12 +28,14 @@ class RPCBindTest(BitcoinTestFramework): then try to connect, and check if the set of bound addresses matches the expected set. ''' + self.log.info("Bind test for %s" % str(addresses)) expected = [(addr_to_hex(addr), port) for (addr, port) in expected] base_args = ['-disablewallet', '-nolisten'] if allow_ips: base_args += ['-rpcallowip=' + x for x in allow_ips] binds = ['-rpcbind='+addr for addr in addresses] - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, [base_args + binds], connect_to) + self.nodes[0].rpchost = connect_to + self.start_node(0, base_args + binds) pid = self.nodes[0].process.pid assert_equal(set(get_bind_addrs(pid)), set(expected)) self.stop_nodes() @@ -46,8 +45,10 @@ class RPCBindTest(BitcoinTestFramework): Start a node with rpcallow IP, and request getnetworkinfo at a non-localhost IP. ''' + self.log.info("Allow IP test for %s:%d" % (rpchost, rpcport)) base_args = ['-disablewallet', '-nolisten'] + ['-rpcallowip='+x for x in allow_ips] - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, [base_args]) + self.nodes[0].rpchost = None + self.start_nodes([base_args]) # connect to node through non-loopback interface node = get_rpc_proxy(rpc_url(get_datadir_path(self.options.tmpdir, 0), 0, "%s:%d" % (rpchost, rpcport)), 0, coveragedir=self.options.coveragedir) node.getnetworkinfo() diff --git a/test/functional/smartfees.py b/test/functional/smartfees.py index bc42a319df..6eb6658466 100755 --- a/test/functional/smartfees.py +++ b/test/functional/smartfees.py @@ -153,57 +153,16 @@ class EstimateFeeTest(BitcoinTestFramework): But first we need to use one node to create a lot of outputs which we will use to generate our transactions. """ - self.nodes = [] + self.add_nodes(3, self.options.tmpdir, extra_args=[["-maxorphantx=1000", "-whitelist=127.0.0.1"], + ["-blockmaxsize=17000", "-maxorphantx=1000"], + ["-blockmaxsize=8000", "-maxorphantx=1000"]]) # Use node0 to mine blocks for input splitting - self.nodes.append(self.start_node(0, self.options.tmpdir, ["-maxorphantx=1000", - "-whitelist=127.0.0.1"])) - - self.log.info("This test is time consuming, please be patient") - self.log.info("Splitting inputs so we can generate tx's") - self.txouts = [] - self.txouts2 = [] - # Split a coinbase into two transaction puzzle outputs - split_inputs(self.nodes[0], self.nodes[0].listunspent(0), self.txouts, True) - - # Mine - while (len(self.nodes[0].getrawmempool()) > 0): - self.nodes[0].generate(1) - - # Repeatedly split those 2 outputs, doubling twice for each rep - # Use txouts to monitor the available utxo, since these won't be tracked in wallet - reps = 0 - while (reps < 5): - #Double txouts to txouts2 - while (len(self.txouts)>0): - split_inputs(self.nodes[0], self.txouts, self.txouts2) - while (len(self.nodes[0].getrawmempool()) > 0): - self.nodes[0].generate(1) - #Double txouts2 to txouts - while (len(self.txouts2)>0): - split_inputs(self.nodes[0], self.txouts2, self.txouts) - while (len(self.nodes[0].getrawmempool()) > 0): - self.nodes[0].generate(1) - reps += 1 - self.log.info("Finished splitting") - - # Now we can connect the other nodes, didn't want to connect them earlier - # so the estimates would not be affected by the splitting transactions # Node1 mines small blocks but that are bigger than the expected transaction rate. # NOTE: the CreateNewBlock code starts counting block size at 1,000 bytes, # (17k is room enough for 110 or so transactions) - self.nodes.append(self.start_node(1, self.options.tmpdir, - ["-blockmaxsize=17000", "-maxorphantx=1000"])) - connect_nodes(self.nodes[1], 0) - # Node2 is a stingy miner, that # produces too small blocks (room for only 55 or so transactions) - node2args = ["-blockmaxsize=8000", "-maxorphantx=1000"] - self.nodes.append(self.start_node(2, self.options.tmpdir, node2args)) - connect_nodes(self.nodes[0], 2) - connect_nodes(self.nodes[2], 1) - - self.sync_all() def transact_and_mine(self, numblocks, mining_node): min_fee = Decimal("0.00001") @@ -232,9 +191,51 @@ class EstimateFeeTest(BitcoinTestFramework): self.memutxo = newmem def run_test(self): + self.log.info("This test is time consuming, please be patient") + self.log.info("Splitting inputs so we can generate tx's") + # Make log handler available to helper functions global log log = self.log + + # Start node0 + self.start_node(0) + self.txouts = [] + self.txouts2 = [] + # Split a coinbase into two transaction puzzle outputs + split_inputs(self.nodes[0], self.nodes[0].listunspent(0), self.txouts, True) + + # Mine + while (len(self.nodes[0].getrawmempool()) > 0): + self.nodes[0].generate(1) + + # Repeatedly split those 2 outputs, doubling twice for each rep + # Use txouts to monitor the available utxo, since these won't be tracked in wallet + reps = 0 + while (reps < 5): + #Double txouts to txouts2 + while (len(self.txouts)>0): + split_inputs(self.nodes[0], self.txouts, self.txouts2) + while (len(self.nodes[0].getrawmempool()) > 0): + self.nodes[0].generate(1) + #Double txouts2 to txouts + while (len(self.txouts2)>0): + split_inputs(self.nodes[0], self.txouts2, self.txouts) + while (len(self.nodes[0].getrawmempool()) > 0): + self.nodes[0].generate(1) + reps += 1 + self.log.info("Finished splitting") + + # Now we can connect the other nodes, didn't want to connect them earlier + # so the estimates would not be affected by the splitting transactions + self.start_node(1) + self.start_node(2) + connect_nodes(self.nodes[1], 0) + connect_nodes(self.nodes[0], 2) + connect_nodes(self.nodes[2], 1) + + self.sync_all() + self.fees_per_kb = [] self.memutxo = [] self.confutxo = self.txouts # Start with the set of confirmed txouts after splitting diff --git a/test/functional/test_framework/test_framework.py b/test/functional/test_framework/test_framework.py index 7903bb0045..a14ff9c292 100755 --- a/test/functional/test_framework/test_framework.py +++ b/test/functional/test_framework/test_framework.py @@ -91,7 +91,8 @@ class BitcoinTestFramework(object): extra_args = None if hasattr(self, "extra_args"): extra_args = self.extra_args - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, extra_args) + self.add_nodes(self.num_nodes, self.options.tmpdir, extra_args) + self.start_nodes() def run_test(self): raise NotImplementedError @@ -204,37 +205,39 @@ class BitcoinTestFramework(object): # Public helper methods. These can be accessed by the subclass test scripts. - def start_node(self, i, dirname, extra_args=None, rpchost=None, timewait=None, binary=None, stderr=None): - """Start a bitcoind and return RPC connection to it""" + def add_nodes(self, num_nodes, dirname, extra_args=None, rpchost=None, timewait=None, binary=None): + """Instantiate TestNode objects""" if extra_args is None: - extra_args = [] + extra_args = [[]] * num_nodes if binary is None: - binary = os.getenv("BITCOIND", "bitcoind") - node = TestNode(i, dirname, extra_args, rpchost, timewait, binary, stderr, self.mocktime, coverage_dir=self.options.coveragedir) - node.start() + binary = [None] * num_nodes + assert_equal(len(extra_args), num_nodes) + assert_equal(len(binary), num_nodes) + for i in range(num_nodes): + self.nodes.append(TestNode(i, dirname, extra_args[i], rpchost, timewait=timewait, binary=binary[i], stderr=None, mocktime=self.mocktime, coverage_dir=self.options.coveragedir)) + + def start_node(self, i, extra_args=None, stderr=None): + """Start a bitcoind""" + + node = self.nodes[i] + + node.start(extra_args, stderr) node.wait_for_rpc_connection() if self.options.coveragedir is not None: coverage.write_all_rpc_commands(self.options.coveragedir, node.rpc) - return node - - def start_nodes(self, num_nodes, dirname, extra_args=None, rpchost=None, timewait=None, binary=None): - """Start multiple bitcoinds, return RPC connections to them""" + def start_nodes(self, extra_args=None): + """Start multiple bitcoinds""" if extra_args is None: - extra_args = [[]] * num_nodes - if binary is None: - binary = [None] * num_nodes - assert_equal(len(extra_args), num_nodes) - assert_equal(len(binary), num_nodes) - nodes = [] + extra_args = [None] * self.num_nodes + assert_equal(len(extra_args), self.num_nodes) try: - for i in range(num_nodes): - nodes.append(TestNode(i, dirname, extra_args[i], rpchost, timewait=timewait, binary=binary[i], stderr=None, mocktime=self.mocktime, coverage_dir=self.options.coveragedir)) - nodes[i].start() - for node in nodes: + for i, node in enumerate(self.nodes): + node.start(extra_args[i]) + for node in self.nodes: node.wait_for_rpc_connection() except: # If one node failed to start, stop the others @@ -242,11 +245,9 @@ class BitcoinTestFramework(object): raise if self.options.coveragedir is not None: - for node in nodes: + for node in self.nodes: coverage.write_all_rpc_commands(self.options.coveragedir, node.rpc) - return nodes - def stop_node(self, i): """Stop a bitcoind test node""" self.nodes[i].stop_node() @@ -264,10 +265,10 @@ class BitcoinTestFramework(object): while not node.is_node_stopped(): time.sleep(0.1) - def assert_start_raises_init_error(self, i, dirname, extra_args=None, expected_msg=None): + def assert_start_raises_init_error(self, i, extra_args=None, expected_msg=None): with tempfile.SpooledTemporaryFile(max_size=2**16) as log_stderr: try: - self.start_node(i, dirname, extra_args, stderr=log_stderr) + self.start_node(i, extra_args, stderr=log_stderr) self.stop_node(i) except Exception as e: assert 'bitcoind exited' in str(e) # node must have shutdown @@ -385,7 +386,7 @@ class BitcoinTestFramework(object): args.append("-connect=127.0.0.1:" + str(p2p_port(0))) self.nodes.append(TestNode(i, cachedir, extra_args=[], rpchost=None, timewait=None, binary=None, stderr=None, mocktime=self.mocktime, coverage_dir=None)) self.nodes[i].args = args - self.nodes[i].start() + self.start_node(i) # Wait for RPC connections to be ready for node in self.nodes: @@ -455,13 +456,13 @@ class ComparisonTestFramework(BitcoinTestFramework): help="bitcoind binary to use for reference nodes (if any)") def setup_network(self): - extra_args = [['-whitelist=127.0.0.1']]*self.num_nodes + extra_args = [['-whitelist=127.0.0.1']] * self.num_nodes if hasattr(self, "extra_args"): extra_args = self.extra_args - self.nodes = self.start_nodes( - self.num_nodes, self.options.tmpdir, extra_args, - binary=[self.options.testbinary] + - [self.options.refbinary] * (self.num_nodes - 1)) + self.add_nodes(self.num_nodes, self.options.tmpdir, extra_args, + binary=[self.options.testbinary] + + [self.options.refbinary] * (self.num_nodes - 1)) + self.start_nodes() class SkipTest(Exception): """This exception is raised to skip a test""" diff --git a/test/functional/test_framework/test_node.py b/test/functional/test_framework/test_node.py index 553c7c9d20..efb3ac9d16 100755 --- a/test/functional/test_framework/test_node.py +++ b/test/functional/test_framework/test_node.py @@ -65,9 +65,13 @@ class TestNode(): assert self.rpc_connected and self.rpc is not None, "Error: no RPC connection" return self.rpc.__getattr__(*args, **kwargs) - def start(self): + def start(self, extra_args=None, stderr=None): """Start the node.""" - self.process = subprocess.Popen(self.args + self.extra_args, stderr=self.stderr) + if extra_args is None: + extra_args = self.extra_args + if stderr is None: + stderr = self.stderr + self.process = subprocess.Popen(self.args + extra_args, stderr=stderr) self.running = True self.log.debug("bitcoind started, waiting for RPC to come up") diff --git a/test/functional/wallet-dump.py b/test/functional/wallet-dump.py index 61ad00330b..a588e2386f 100755 --- a/test/functional/wallet-dump.py +++ b/test/functional/wallet-dump.py @@ -68,7 +68,8 @@ class WalletDumpTest(BitcoinTestFramework): # longer than the default 30 seconds due to an expensive # CWallet::TopUpKeyPool call, and the encryptwallet RPC made later in # the test often takes even longer. - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, self.extra_args, timewait=60) + self.add_nodes(self.num_nodes, self.options.tmpdir, self.extra_args, timewait=60) + self.start_nodes() def run_test (self): tmpdir = self.options.tmpdir @@ -95,7 +96,7 @@ class WalletDumpTest(BitcoinTestFramework): #encrypt wallet, restart, unlock and dump self.nodes[0].node_encrypt_wallet('test') - self.nodes[0] = self.start_node(0, self.options.tmpdir, self.extra_args[0]) + self.start_node(0) self.nodes[0].walletpassphrase('test', 10) # Should be a no-op: self.nodes[0].keypoolrefill() diff --git a/test/functional/wallet-encryption.py b/test/functional/wallet-encryption.py index 8fea4140db..2f38e6fee8 100755 --- a/test/functional/wallet-encryption.py +++ b/test/functional/wallet-encryption.py @@ -31,7 +31,7 @@ class WalletEncryptionTest(BitcoinTestFramework): # Encrypt the wallet self.nodes[0].node_encrypt_wallet(passphrase) - self.nodes[0] = self.start_node(0, self.options.tmpdir) + self.start_node(0) # Test that the wallet is encrypted assert_raises_jsonrpc(-13, "Please enter the wallet passphrase with walletpassphrase first", self.nodes[0].dumpprivkey, address) diff --git a/test/functional/wallet-hd.py b/test/functional/wallet-hd.py index 821575ed19..13b9dd9a90 100755 --- a/test/functional/wallet-hd.py +++ b/test/functional/wallet-hd.py @@ -25,8 +25,8 @@ class WalletHDTest(BitcoinTestFramework): # Make sure can't switch off usehd after wallet creation self.stop_node(1) - self.assert_start_raises_init_error(1, self.options.tmpdir, ['-usehd=0'], 'already existing HD wallet') - self.nodes[1] = self.start_node(1, self.options.tmpdir, self.extra_args[1]) + self.assert_start_raises_init_error(1, ['-usehd=0'], 'already existing HD wallet') + self.start_node(1) connect_nodes_bi(self.nodes, 0, 1) # Make sure we use hd, keep masterkeyid @@ -76,7 +76,7 @@ class WalletHDTest(BitcoinTestFramework): shutil.rmtree(tmpdir + "/node1/regtest/blocks") shutil.rmtree(tmpdir + "/node1/regtest/chainstate") shutil.copyfile(tmpdir + "/hd.bak", tmpdir + "/node1/regtest/wallet.dat") - self.nodes[1] = self.start_node(1, self.options.tmpdir, self.extra_args[1]) + self.start_node(1) # Assert that derivation is deterministic hd_add_2 = None @@ -91,7 +91,7 @@ class WalletHDTest(BitcoinTestFramework): # Needs rescan self.stop_node(1) - self.nodes[1] = self.start_node(1, self.options.tmpdir, self.extra_args[1] + ['-rescan']) + self.start_node(1, extra_args=self.extra_args[1] + ['-rescan']) assert_equal(self.nodes[1].getbalance(), num_hd_adds + 1) # send a tx and make sure its using the internal chain for the changeoutput diff --git a/test/functional/wallet.py b/test/functional/wallet.py index a37c457bc8..1789610149 100755 --- a/test/functional/wallet.py +++ b/test/functional/wallet.py @@ -21,11 +21,14 @@ class WalletTest(BitcoinTestFramework): self.extra_args = [['-usehd={:d}'.format(i%2==0)] for i in range(4)] def setup_network(self): - self.nodes = self.start_nodes(3, self.options.tmpdir, self.extra_args[:3]) + self.add_nodes(4, self.options.tmpdir, self.extra_args) + self.start_node(0) + self.start_node(1) + self.start_node(2) connect_nodes_bi(self.nodes,0,1) connect_nodes_bi(self.nodes,1,2) connect_nodes_bi(self.nodes,0,2) - self.sync_all() + self.sync_all([self.nodes[0:3]]) def run_test(self): @@ -42,9 +45,9 @@ class WalletTest(BitcoinTestFramework): assert_equal(walletinfo['immature_balance'], 50) assert_equal(walletinfo['balance'], 0) - self.sync_all() + self.sync_all([self.nodes[0:3]]) self.nodes[1].generate(101) - self.sync_all() + self.sync_all([self.nodes[0:3]]) assert_equal(self.nodes[0].getbalance(), 50) assert_equal(self.nodes[1].getbalance(), 50) @@ -96,7 +99,7 @@ class WalletTest(BitcoinTestFramework): # Have node0 mine a block, thus it will collect its own fee. self.nodes[0].generate(1) - self.sync_all() + self.sync_all([self.nodes[0:3]]) # Exercise locking of unspent outputs unspent_0 = self.nodes[2].listunspent()[0] @@ -109,7 +112,7 @@ class WalletTest(BitcoinTestFramework): # Have node1 generate 100 blocks (so node0 can recover the fee) self.nodes[1].generate(100) - self.sync_all() + self.sync_all([self.nodes[0:3]]) # node0 should end up with 100 btc in block rewards plus fees, but # minus the 21 plus fees sent to node2 @@ -138,7 +141,7 @@ class WalletTest(BitcoinTestFramework): # Have node1 mine a block to confirm transactions: self.nodes[1].generate(1) - self.sync_all() + self.sync_all([self.nodes[0:3]]) assert_equal(self.nodes[0].getbalance(), 0) assert_equal(self.nodes[2].getbalance(), 94) @@ -150,14 +153,14 @@ class WalletTest(BitcoinTestFramework): self.nodes[2].settxfee(fee_per_byte * 1000) txid = self.nodes[2].sendtoaddress(address, 10, "", "", False) self.nodes[2].generate(1) - self.sync_all() + self.sync_all([self.nodes[0:3]]) node_2_bal = self.check_fee_amount(self.nodes[2].getbalance(), Decimal('84'), fee_per_byte, count_bytes(self.nodes[2].getrawtransaction(txid))) assert_equal(self.nodes[0].getbalance(), Decimal('10')) # Send 10 BTC with subtract fee from amount txid = self.nodes[2].sendtoaddress(address, 10, "", "", True) self.nodes[2].generate(1) - self.sync_all() + self.sync_all([self.nodes[0:3]]) node_2_bal -= Decimal('10') assert_equal(self.nodes[2].getbalance(), node_2_bal) node_0_bal = self.check_fee_amount(self.nodes[0].getbalance(), Decimal('20'), fee_per_byte, count_bytes(self.nodes[2].getrawtransaction(txid))) @@ -165,7 +168,7 @@ class WalletTest(BitcoinTestFramework): # Sendmany 10 BTC txid = self.nodes[2].sendmany('from1', {address: 10}, 0, "", []) self.nodes[2].generate(1) - self.sync_all() + self.sync_all([self.nodes[0:3]]) node_0_bal += Decimal('10') node_2_bal = self.check_fee_amount(self.nodes[2].getbalance(), node_2_bal - Decimal('10'), fee_per_byte, count_bytes(self.nodes[2].getrawtransaction(txid))) assert_equal(self.nodes[0].getbalance(), node_0_bal) @@ -173,7 +176,7 @@ class WalletTest(BitcoinTestFramework): # Sendmany 10 BTC with subtract fee from amount txid = self.nodes[2].sendmany('from1', {address: 10}, 0, "", [address]) self.nodes[2].generate(1) - self.sync_all() + self.sync_all([self.nodes[0:3]]) node_2_bal -= Decimal('10') assert_equal(self.nodes[2].getbalance(), node_2_bal) node_0_bal = self.check_fee_amount(self.nodes[0].getbalance(), node_0_bal + Decimal('10'), fee_per_byte, count_bytes(self.nodes[2].getrawtransaction(txid))) @@ -184,9 +187,9 @@ class WalletTest(BitcoinTestFramework): # EXPECT: nodes[3] should have those transactions in its mempool. txid1 = self.nodes[0].sendtoaddress(self.nodes[1].getnewaddress(), 1) txid2 = self.nodes[1].sendtoaddress(self.nodes[0].getnewaddress(), 1) - sync_mempools(self.nodes) + sync_mempools(self.nodes[0:2]) - self.nodes.append(self.start_node(3, self.options.tmpdir, self.extra_args[3])) + self.start_node(3) connect_nodes_bi(self.nodes, 0, 3) sync_blocks(self.nodes) @@ -230,22 +233,24 @@ class WalletTest(BitcoinTestFramework): #do some -walletbroadcast tests self.stop_nodes() - self.nodes = self.start_nodes(3, self.options.tmpdir, [["-walletbroadcast=0"],["-walletbroadcast=0"],["-walletbroadcast=0"]]) + self.start_node(0, ["-walletbroadcast=0"]) + self.start_node(1, ["-walletbroadcast=0"]) + self.start_node(2, ["-walletbroadcast=0"]) connect_nodes_bi(self.nodes,0,1) connect_nodes_bi(self.nodes,1,2) connect_nodes_bi(self.nodes,0,2) - self.sync_all() + self.sync_all([self.nodes[0:3]]) txIdNotBroadcasted = self.nodes[0].sendtoaddress(self.nodes[2].getnewaddress(), 2) txObjNotBroadcasted = self.nodes[0].gettransaction(txIdNotBroadcasted) self.nodes[1].generate(1) #mine a block, tx should not be in there - self.sync_all() + self.sync_all([self.nodes[0:3]]) assert_equal(self.nodes[2].getbalance(), node_2_bal) #should not be changed because tx was not broadcasted #now broadcast from another node, mine a block, sync, and check the balance self.nodes[1].sendrawtransaction(txObjNotBroadcasted['hex']) self.nodes[1].generate(1) - self.sync_all() + self.sync_all([self.nodes[0:3]]) node_2_bal += 2 txObjNotBroadcasted = self.nodes[0].gettransaction(txIdNotBroadcasted) assert_equal(self.nodes[2].getbalance(), node_2_bal) @@ -255,14 +260,16 @@ class WalletTest(BitcoinTestFramework): #restart the nodes with -walletbroadcast=1 self.stop_nodes() - self.nodes = self.start_nodes(3, self.options.tmpdir) + self.start_node(0) + self.start_node(1) + self.start_node(2) connect_nodes_bi(self.nodes,0,1) connect_nodes_bi(self.nodes,1,2) connect_nodes_bi(self.nodes,0,2) - sync_blocks(self.nodes) + sync_blocks(self.nodes[0:3]) self.nodes[0].generate(1) - sync_blocks(self.nodes) + sync_blocks(self.nodes[0:3]) node_2_bal += 2 #tx should be added to balance because after restarting the nodes tx should be broadcastet @@ -293,7 +300,7 @@ class WalletTest(BitcoinTestFramework): address_to_import = self.nodes[2].getnewaddress() txid = self.nodes[0].sendtoaddress(address_to_import, 1) self.nodes[0].generate(1) - self.sync_all() + self.sync_all([self.nodes[0:3]]) # 2. Import address from node2 to node1 self.nodes[1].importaddress(address_to_import) @@ -319,15 +326,15 @@ class WalletTest(BitcoinTestFramework): cbAddr = self.nodes[1].getnewaddress() blkHash = self.nodes[0].generatetoaddress(1, cbAddr)[0] cbTxId = self.nodes[0].getblock(blkHash)['tx'][0] - self.sync_all() + self.sync_all([self.nodes[0:3]]) # Check that the txid and balance is found by node1 self.nodes[1].gettransaction(cbTxId) # check if wallet or blockchain maintenance changes the balance - self.sync_all() + self.sync_all([self.nodes[0:3]]) blocks = self.nodes[0].generate(2) - self.sync_all() + self.sync_all([self.nodes[0:3]]) balance_nodes = [self.nodes[i].getbalance() for i in range(3)] block_count = self.nodes[0].getblockcount() @@ -358,7 +365,9 @@ class WalletTest(BitcoinTestFramework): self.log.info("check " + m) self.stop_nodes() # set lower ancestor limit for later - self.nodes = self.start_nodes(3, self.options.tmpdir, [[m, "-limitancestorcount="+str(chainlimit)]] * 3) + self.start_node(0, [m, "-limitancestorcount="+str(chainlimit)]) + self.start_node(1, [m, "-limitancestorcount="+str(chainlimit)]) + self.start_node(2, [m, "-limitancestorcount="+str(chainlimit)]) while m == '-reindex' and [block_count] * 3 != [self.nodes[i].getblockcount() for i in range(3)]: # reindex will leave rpc warm up "early"; Wait for it to finish time.sleep(0.1) @@ -406,7 +415,7 @@ class WalletTest(BitcoinTestFramework): # Try with walletrejectlongchains # Double chain limit but require combining inputs, so we pass SelectCoinsMinConf self.stop_node(0) - self.nodes[0] = self.start_node(0, self.options.tmpdir, ["-walletrejectlongchains", "-limitancestorcount="+str(2*chainlimit)]) + self.start_node(0, extra_args=["-walletrejectlongchains", "-limitancestorcount="+str(2*chainlimit)]) # wait for loadmempool timeout = 10 diff --git a/test/functional/walletbackup.py b/test/functional/walletbackup.py index ff51cba4b3..688cd6d0c8 100755 --- a/test/functional/walletbackup.py +++ b/test/functional/walletbackup.py @@ -78,9 +78,9 @@ class WalletBackupTest(BitcoinTestFramework): # As above, this mirrors the original bash test. def start_three(self): - self.nodes[0] = self.start_node(0, self.options.tmpdir) - self.nodes[1] = self.start_node(1, self.options.tmpdir) - self.nodes[2] = self.start_node(2, self.options.tmpdir) + self.start_node(0) + self.start_node(1) + self.start_node(2) connect_nodes(self.nodes[0], 3) connect_nodes(self.nodes[1], 3) connect_nodes(self.nodes[2], 3) diff --git a/test/functional/zapwallettxes.py b/test/functional/zapwallettxes.py index af867d7a52..1005a4b95f 100755 --- a/test/functional/zapwallettxes.py +++ b/test/functional/zapwallettxes.py @@ -48,7 +48,7 @@ class ZapWalletTXesTest (BitcoinTestFramework): # Stop-start node0. Both confirmed and unconfirmed transactions remain in the wallet. self.stop_node(0) - self.nodes[0] = self.start_node(0, self.options.tmpdir) + self.start_node(0) assert_equal(self.nodes[0].gettransaction(txid1)['txid'], txid1) assert_equal(self.nodes[0].gettransaction(txid2)['txid'], txid2) @@ -56,7 +56,7 @@ class ZapWalletTXesTest (BitcoinTestFramework): # Stop node0 and restart with zapwallettxes and persistmempool. The unconfirmed # transaction is zapped from the wallet, but is re-added when the mempool is reloaded. self.stop_node(0) - self.nodes[0] = self.start_node(0, self.options.tmpdir, ["-persistmempool=1", "-zapwallettxes=2"]) + self.start_node(0, ["-persistmempool=1", "-zapwallettxes=2"]) assert_equal(self.nodes[0].gettransaction(txid1)['txid'], txid1) assert_equal(self.nodes[0].gettransaction(txid2)['txid'], txid2) @@ -64,7 +64,7 @@ class ZapWalletTXesTest (BitcoinTestFramework): # Stop node0 and restart with zapwallettxes, but not persistmempool. # The unconfirmed transaction is zapped and is no longer in the wallet. self.stop_node(0) - self.nodes[0] = self.start_node(0, self.options.tmpdir, ["-zapwallettxes=2"]) + self.start_node(0, ["-zapwallettxes=2"]) # tx1 is still be available because it was confirmed assert_equal(self.nodes[0].gettransaction(txid1)['txid'], txid1) diff --git a/test/functional/zmq_test.py b/test/functional/zmq_test.py index 26c946d215..603b7a1b94 100755 --- a/test/functional/zmq_test.py +++ b/test/functional/zmq_test.py @@ -41,8 +41,9 @@ class ZMQTest (BitcoinTestFramework): self.zmqSubSocket.setsockopt(zmq.SUBSCRIBE, b"hashtx") ip_address = "tcp://127.0.0.1:28332" self.zmqSubSocket.connect(ip_address) - extra_args = [['-zmqpubhashtx=%s' % ip_address, '-zmqpubhashblock=%s' % ip_address], []] - self.nodes = self.start_nodes(self.num_nodes, self.options.tmpdir, extra_args) + self.extra_args = [['-zmqpubhashtx=%s' % ip_address, '-zmqpubhashblock=%s' % ip_address], []] + self.add_nodes(self.num_nodes, self.options.tmpdir, self.extra_args) + self.start_nodes() def run_test(self): try: |