diff options
| -rw-r--r-- | src/bitcoin-cli.cpp | 30 | ||||
| -rw-r--r-- | src/bitcoin-tx.cpp | 50 | ||||
| -rw-r--r-- | src/init.cpp | 242 | ||||
| -rw-r--r-- | src/util.cpp | 15 | ||||
| -rw-r--r-- | src/util.h | 17 |
5 files changed, 193 insertions, 161 deletions
diff --git a/src/bitcoin-cli.cpp b/src/bitcoin-cli.cpp index f273a15713..2fa8de6fd8 100644 --- a/src/bitcoin-cli.cpp +++ b/src/bitcoin-cli.cpp @@ -20,21 +20,21 @@ using namespace json_spirit; std::string HelpMessageCli() { string strUsage; - strUsage += _("Options:") + "\n"; - strUsage += " -? " + _("This help message") + "\n"; - strUsage += " -conf=<file> " + strprintf(_("Specify configuration file (default: %s)"), "bitcoin.conf") + "\n"; - strUsage += " -datadir=<dir> " + _("Specify data directory") + "\n"; - strUsage += " -testnet " + _("Use the test network") + "\n"; - strUsage += " -regtest " + _("Enter regression test mode, which uses a special chain in which blocks can be " - "solved instantly. This is intended for regression testing tools and app development.") + "\n"; - strUsage += " -rpcconnect=<ip> " + strprintf(_("Send commands to node running on <ip> (default: %s)"), "127.0.0.1") + "\n"; - strUsage += " -rpcport=<port> " + strprintf(_("Connect to JSON-RPC on <port> (default: %u or testnet: %u)"), 8332, 18332) + "\n"; - strUsage += " -rpcwait " + _("Wait for RPC server to start") + "\n"; - strUsage += " -rpcuser=<user> " + _("Username for JSON-RPC connections") + "\n"; - strUsage += " -rpcpassword=<pw> " + _("Password for JSON-RPC connections") + "\n"; - - strUsage += "\n" + _("SSL options: (see the Bitcoin Wiki for SSL setup instructions)") + "\n"; - strUsage += " -rpcssl " + _("Use OpenSSL (https) for JSON-RPC connections") + "\n"; + strUsage += HelpMessageGroup(_("Options:")); + strUsage += HelpMessageOpt("-?", _("This help message")); + strUsage += HelpMessageOpt("-conf=<file>", strprintf(_("Specify configuration file (default: %s)"), "bitcoin.conf")); + strUsage += HelpMessageOpt("-datadir=<dir>", _("Specify data directory")); + strUsage += HelpMessageOpt("-testnet", _("Use the test network")); + strUsage += HelpMessageOpt("-regtest", _("Enter regression test mode, which uses a special chain in which blocks can be " + "solved instantly. This is intended for regression testing tools and app development.")); + strUsage += HelpMessageOpt("-rpcconnect=<ip>", strprintf(_("Send commands to node running on <ip> (default: %s)"), "127.0.0.1")); + strUsage += HelpMessageOpt("-rpcport=<port>", strprintf(_("Connect to JSON-RPC on <port> (default: %u or testnet: %u)"), 8332, 18332)); + strUsage += HelpMessageOpt("-rpcwait", _("Wait for RPC server to start")); + strUsage += HelpMessageOpt("-rpcuser=<user>", _("Username for JSON-RPC connections")); + strUsage += HelpMessageOpt("-rpcpassword=<pw>", _("Password for JSON-RPC connections")); + + strUsage += HelpMessageGroup(_("SSL options: (see the Bitcoin Wiki for SSL setup instructions)")); + strUsage += HelpMessageOpt("-rpcssl", _("Use OpenSSL (https) for JSON-RPC connections")); return strUsage; } diff --git a/src/bitcoin-tx.cpp b/src/bitcoin-tx.cpp index c1622cf5d3..78f5c2c4b6 100644 --- a/src/bitcoin-tx.cpp +++ b/src/bitcoin-tx.cpp @@ -54,38 +54,34 @@ static bool AppInitRawTx(int argc, char* argv[]) fprintf(stdout, "%s", strUsage.c_str()); - strUsage = _("Options:") + "\n"; - strUsage += " -? " + _("This help message") + "\n"; - strUsage += " -create " + _("Create new, empty TX.") + "\n"; - strUsage += " -json " + _("Select JSON output") + "\n"; - strUsage += " -txid " + _("Output only the hex-encoded transaction id of the resultant transaction.") + "\n"; - strUsage += " -regtest " + _("Enter regression test mode, which uses a special chain in which blocks can be solved instantly.") + "\n"; - strUsage += " -testnet " + _("Use the test network") + "\n"; - strUsage += "\n"; + strUsage = HelpMessageGroup(_("Options:")); + strUsage += HelpMessageOpt("-?", _("This help message")); + strUsage += HelpMessageOpt("-create", _("Create new, empty TX.")); + strUsage += HelpMessageOpt("-json", _("Select JSON output")); + strUsage += HelpMessageOpt("-txid", _("Output only the hex-encoded transaction id of the resultant transaction.")); + strUsage += HelpMessageOpt("-regtest", _("Enter regression test mode, which uses a special chain in which blocks can be solved instantly.")); + strUsage += HelpMessageOpt("-testnet", _("Use the test network")); fprintf(stdout, "%s", strUsage.c_str()); - - strUsage = _("Commands:") + "\n"; - strUsage += " delin=N " + _("Delete input N from TX") + "\n"; - strUsage += " delout=N " + _("Delete output N from TX") + "\n"; - strUsage += " in=TXID:VOUT " + _("Add input to TX") + "\n"; - strUsage += " locktime=N " + _("Set TX lock time to N") + "\n"; - strUsage += " nversion=N " + _("Set TX version to N") + "\n"; - strUsage += " outaddr=VALUE:ADDRESS " + _("Add address-based output to TX") + "\n"; - strUsage += " outscript=VALUE:SCRIPT " + _("Add raw script output to TX") + "\n"; - strUsage += " sign=SIGHASH-FLAGS " + _("Add zero or more signatures to transaction") + "\n"; - strUsage += " This command requires JSON registers:\n"; - strUsage += " prevtxs=JSON object\n"; - strUsage += " privatekeys=JSON object\n"; - strUsage += " See signrawtransaction docs for format of sighash flags, JSON objects.\n"; - strUsage += "\n"; + strUsage = HelpMessageGroup(_("Commands:")); + strUsage += HelpMessageOpt("delin=N", _("Delete input N from TX")); + strUsage += HelpMessageOpt("delout=N", _("Delete output N from TX")); + strUsage += HelpMessageOpt("in=TXID:VOUT", _("Add input to TX")); + strUsage += HelpMessageOpt("locktime=N", _("Set TX lock time to N")); + strUsage += HelpMessageOpt("nversion=N", _("Set TX version to N")); + strUsage += HelpMessageOpt("outaddr=VALUE:ADDRESS", _("Add address-based output to TX")); + strUsage += HelpMessageOpt("outscript=VALUE:SCRIPT", _("Add raw script output to TX")); + strUsage += HelpMessageOpt("sign=SIGHASH-FLAGS", _("Add zero or more signatures to transaction") + ". " + + _("This command requires JSON registers:") + + _("prevtxs=JSON object") + ", " + + _("privatekeys=JSON object") + ". " + + _("See signrawtransaction docs for format of sighash flags, JSON objects.")); fprintf(stdout, "%s", strUsage.c_str()); - strUsage = _("Register Commands:") + "\n"; - strUsage += " load=NAME:FILENAME " + _("Load JSON file FILENAME into register NAME") + "\n"; - strUsage += " set=NAME:JSON-STRING " + _("Set register NAME to given JSON-STRING") + "\n"; - strUsage += "\n"; + strUsage = HelpMessageGroup(_("Register Commands:")); + strUsage += HelpMessageOpt("load=NAME:FILENAME", _("Load JSON file FILENAME into register NAME")); + strUsage += HelpMessageOpt("set=NAME:JSON-STRING", _("Set register NAME to given JSON-STRING")); fprintf(stdout, "%s", strUsage.c_str()); return false; diff --git a/src/init.cpp b/src/init.cpp index c8f32d8bfd..eea02dc242 100644 --- a/src/init.cpp +++ b/src/init.cpp @@ -256,157 +256,161 @@ void OnRPCPreCommand(const CRPCCommand& cmd) std::string HelpMessage(HelpMessageMode mode) { + // When adding new options to the categories, please keep and ensure alphabetical ordering. - string strUsage = _("Options:") + "\n"; - strUsage += " -? " + _("This help message") + "\n"; - strUsage += " -alertnotify=<cmd> " + _("Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)") + "\n"; - strUsage += " -blocknotify=<cmd> " + _("Execute command when the best block changes (%s in cmd is replaced by block hash)") + "\n"; - strUsage += " -checkblocks=<n> " + strprintf(_("How many blocks to check at startup (default: %u, 0 = all)"), 288) + "\n"; - strUsage += " -checklevel=<n> " + strprintf(_("How thorough the block verification of -checkblocks is (0-4, default: %u)"), 3) + "\n"; - strUsage += " -conf=<file> " + strprintf(_("Specify configuration file (default: %s)"), "bitcoin.conf") + "\n"; + string strUsage = HelpMessageGroup(_("Options:")); + strUsage += HelpMessageOpt("-?", _("This help message")); + strUsage += HelpMessageOpt("-alertnotify=<cmd>", _("Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)")); + strUsage += HelpMessageOpt("-blocknotify=<cmd>", _("Execute command when the best block changes (%s in cmd is replaced by block hash)")); + strUsage += HelpMessageOpt("-checkblocks=<n>", strprintf(_("How many blocks to check at startup (default: %u, 0 = all)"), 288)); + strUsage += HelpMessageOpt("-checklevel=<n>", strprintf(_("How thorough the block verification of -checkblocks is (0-4, default: %u)"), 3)); + strUsage += HelpMessageOpt("-conf=<file>", strprintf(_("Specify configuration file (default: %s)"), "bitcoin.conf")); if (mode == HMM_BITCOIND) { #if !defined(WIN32) - strUsage += " -daemon " + _("Run in the background as a daemon and accept commands") + "\n"; + strUsage += HelpMessageOpt("-daemon", _("Run in the background as a daemon and accept commands")); #endif } - strUsage += " -datadir=<dir> " + _("Specify data directory") + "\n"; - strUsage += " -dbcache=<n> " + strprintf(_("Set database cache size in megabytes (%d to %d, default: %d)"), nMinDbCache, nMaxDbCache, nDefaultDbCache) + "\n"; - strUsage += " -loadblock=<file> " + _("Imports blocks from external blk000??.dat file") + " " + _("on startup") + "\n"; - strUsage += " -maxorphantx=<n> " + strprintf(_("Keep at most <n> unconnectable transactions in memory (default: %u)"), DEFAULT_MAX_ORPHAN_TRANSACTIONS) + "\n"; - strUsage += " -par=<n> " + strprintf(_("Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d)"), -(int)boost::thread::hardware_concurrency(), MAX_SCRIPTCHECK_THREADS, DEFAULT_SCRIPTCHECK_THREADS) + "\n"; + strUsage += HelpMessageOpt("-datadir=<dir>", _("Specify data directory")); + strUsage += HelpMessageOpt("-dbcache=<n>", strprintf(_("Set database cache size in megabytes (%d to %d, default: %d)"), nMinDbCache, nMaxDbCache, nDefaultDbCache)); + strUsage += HelpMessageOpt("-loadblock=<file>", _("Imports blocks from external blk000??.dat file") + " " + _("on startup")); + strUsage += HelpMessageOpt("-maxorphantx=<n>", strprintf(_("Keep at most <n> unconnectable transactions in memory (default: %u)"), DEFAULT_MAX_ORPHAN_TRANSACTIONS)); + strUsage += HelpMessageOpt("-par=<n>", strprintf(_("Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d)"), + -(int)boost::thread::hardware_concurrency(), MAX_SCRIPTCHECK_THREADS, DEFAULT_SCRIPTCHECK_THREADS)); #ifndef WIN32 - strUsage += " -pid=<file> " + strprintf(_("Specify pid file (default: %s)"), "bitcoind.pid") + "\n"; + strUsage += HelpMessageOpt("-pid=<file>", strprintf(_("Specify pid file (default: %s)"), "bitcoind.pid")); #endif - strUsage += " -reindex " + _("Rebuild block chain index from current blk000??.dat files") + " " + _("on startup") + "\n"; + strUsage += HelpMessageOpt("-reindex", _("Rebuild block chain index from current blk000??.dat files") + " " + _("on startup")); #if !defined(WIN32) - strUsage += " -sysperms " + _("Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality)") + "\n"; + strUsage += HelpMessageOpt("-sysperms", _("Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality)")); #endif - strUsage += " -txindex " + strprintf(_("Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u)"), 0) + "\n"; - - strUsage += "\n" + _("Connection options:") + "\n"; - strUsage += " -addnode=<ip> " + _("Add a node to connect to and attempt to keep the connection open") + "\n"; - strUsage += " -banscore=<n> " + strprintf(_("Threshold for disconnecting misbehaving peers (default: %u)"), 100) + "\n"; - strUsage += " -bantime=<n> " + strprintf(_("Number of seconds to keep misbehaving peers from reconnecting (default: %u)"), 86400) + "\n"; - strUsage += " -bind=<addr> " + _("Bind to given address and always listen on it. Use [host]:port notation for IPv6") + "\n"; - strUsage += " -connect=<ip> " + _("Connect only to the specified node(s)") + "\n"; - strUsage += " -discover " + _("Discover own IP addresses (default: 1 when listening and no -externalip or -proxy)") + "\n"; - strUsage += " -dns " + _("Allow DNS lookups for -addnode, -seednode and -connect") + " " + _("(default: 1)") + "\n"; - strUsage += " -dnsseed " + _("Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect)") + "\n"; - strUsage += " -externalip=<ip> " + _("Specify your own public address") + "\n"; - strUsage += " -forcednsseed " + strprintf(_("Always query for peer addresses via DNS lookup (default: %u)"), 0) + "\n"; - strUsage += " -listen " + _("Accept connections from outside (default: 1 if no -proxy or -connect)") + "\n"; - strUsage += " -maxconnections=<n> " + strprintf(_("Maintain at most <n> connections to peers (default: %u)"), 125) + "\n"; - strUsage += " -maxreceivebuffer=<n> " + strprintf(_("Maximum per-connection receive buffer, <n>*1000 bytes (default: %u)"), 5000) + "\n"; - strUsage += " -maxsendbuffer=<n> " + strprintf(_("Maximum per-connection send buffer, <n>*1000 bytes (default: %u)"), 1000) + "\n"; - strUsage += " -onion=<ip:port> " + strprintf(_("Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s)"), "-proxy") + "\n"; - strUsage += " -onlynet=<net> " + _("Only connect to nodes in network <net> (ipv4, ipv6 or onion)") + "\n"; - strUsage += " -permitbaremultisig " + strprintf(_("Relay non-P2SH multisig (default: %u)"), 1) + "\n"; - strUsage += " -port=<port> " + strprintf(_("Listen for connections on <port> (default: %u or testnet: %u)"), 8333, 18333) + "\n"; - strUsage += " -proxy=<ip:port> " + _("Connect through SOCKS5 proxy") + "\n"; - strUsage += " -seednode=<ip> " + _("Connect to a node to retrieve peer addresses, and disconnect") + "\n"; - strUsage += " -timeout=<n> " + strprintf(_("Specify connection timeout in milliseconds (minimum: 1, default: %d)"), DEFAULT_CONNECT_TIMEOUT) + "\n"; + strUsage += HelpMessageOpt("-txindex", strprintf(_("Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u)"), 0)); + + strUsage += HelpMessageGroup(_("Connection options:")); + strUsage += HelpMessageOpt("-addnode=<ip>", _("Add a node to connect to and attempt to keep the connection open")); + strUsage += HelpMessageOpt("-banscore=<n>", strprintf(_("Threshold for disconnecting misbehaving peers (default: %u)"), 100)); + strUsage += HelpMessageOpt("-bantime=<n>", strprintf(_("Number of seconds to keep misbehaving peers from reconnecting (default: %u)"), 86400)); + strUsage += HelpMessageOpt("-bind=<addr>", _("Bind to given address and always listen on it. Use [host]:port notation for IPv6")); + strUsage += HelpMessageOpt("-connect=<ip>", _("Connect only to the specified node(s)")); + strUsage += HelpMessageOpt("-discover", _("Discover own IP addresses (default: 1 when listening and no -externalip or -proxy)")); + strUsage += HelpMessageOpt("-dns", _("Allow DNS lookups for -addnode, -seednode and -connect") + " " + _("(default: 1)")); + strUsage += HelpMessageOpt("-dnsseed", _("Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect)")); + strUsage += HelpMessageOpt("-externalip=<ip>", _("Specify your own public address")); + strUsage += HelpMessageOpt("-forcednsseed", strprintf(_("Always query for peer addresses via DNS lookup (default: %u)"), 0)); + strUsage += HelpMessageOpt("-listen", _("Accept connections from outside (default: 1 if no -proxy or -connect)")); + strUsage += HelpMessageOpt("-maxconnections=<n>", strprintf(_("Maintain at most <n> connections to peers (default: %u)"), 125)); + strUsage += HelpMessageOpt("-maxreceivebuffer=<n>", strprintf(_("Maximum per-connection receive buffer, <n>*1000 bytes (default: %u)"), 5000)); + strUsage += HelpMessageOpt("-maxsendbuffer=<n>", strprintf(_("Maximum per-connection send buffer, <n>*1000 bytes (default: %u)"), 1000)); + strUsage += HelpMessageOpt("-onion=<ip:port>", strprintf(_("Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s)"), "-proxy")); + strUsage += HelpMessageOpt("-onlynet=<net>", _("Only connect to nodes in network <net> (ipv4, ipv6 or onion)")); + strUsage += HelpMessageOpt("-permitbaremultisig", strprintf(_("Relay non-P2SH multisig (default: %u)"), 1)); + strUsage += HelpMessageOpt("-port=<port>", strprintf(_("Listen for connections on <port> (default: %u or testnet: %u)"), 8333, 18333)); + strUsage += HelpMessageOpt("-proxy=<ip:port>", _("Connect through SOCKS5 proxy")); + strUsage += HelpMessageOpt("-seednode=<ip>", _("Connect to a node to retrieve peer addresses, and disconnect")); + strUsage += HelpMessageOpt("-timeout=<n>", strprintf(_("Specify connection timeout in milliseconds (minimum: 1, default: %d)"), DEFAULT_CONNECT_TIMEOUT)); #ifdef USE_UPNP #if USE_UPNP - strUsage += " -upnp " + _("Use UPnP to map the listening port (default: 1 when listening)") + "\n"; + strUsage += HelpMessageOpt("-upnp", _("Use UPnP to map the listening port (default: 1 when listening)")); #else - strUsage += " -upnp " + strprintf(_("Use UPnP to map the listening port (default: %u)"), 0) + "\n"; + strUsage += HelpMessageOpt("-upnp", strprintf(_("Use UPnP to map the listening port (default: %u)"), 0)); #endif #endif - strUsage += " -whitebind=<addr> " + _("Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6") + "\n"; - strUsage += " -whitelist=<netmask> " + _("Whitelist peers connecting from the given netmask or IP address. Can be specified multiple times.") + "\n"; - strUsage += " " + _("Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway") + "\n"; + strUsage += HelpMessageOpt("-whitebind=<addr>", _("Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6")); + strUsage += HelpMessageOpt("-whitelist=<netmask>", _("Whitelist peers connecting from the given netmask or IP address. Can be specified multiple times.") + + " " + _("Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway")); + #ifdef ENABLE_WALLET - strUsage += "\n" + _("Wallet options:") + "\n"; - strUsage += " -disablewallet " + _("Do not load the wallet and disable wallet RPC calls") + "\n"; - strUsage += " -keypool=<n> " + strprintf(_("Set key pool size to <n> (default: %u)"), 100) + "\n"; + strUsage += HelpMessageGroup(_("Wallet options:")); + strUsage += HelpMessageOpt("-disablewallet", _("Do not load the wallet and disable wallet RPC calls")); + strUsage += HelpMessageOpt("-keypool=<n>", strprintf(_("Set key pool size to <n> (default: %u)"), 100)); if (GetBoolArg("-help-debug", false)) - strUsage += " -mintxfee=<amt> " + strprintf(_("Fees (in BTC/Kb) smaller than this are considered zero fee for transaction creation (default: %s)"), FormatMoney(CWallet::minTxFee.GetFeePerK())) + "\n"; - strUsage += " -paytxfee=<amt> " + strprintf(_("Fee (in BTC/kB) to add to transactions you send (default: %s)"), FormatMoney(payTxFee.GetFeePerK())) + "\n"; - strUsage += " -rescan " + _("Rescan the block chain for missing wallet transactions") + " " + _("on startup") + "\n"; - strUsage += " -salvagewallet " + _("Attempt to recover private keys from a corrupt wallet.dat") + " " + _("on startup") + "\n"; - strUsage += " -sendfreetransactions " + strprintf(_("Send transactions as zero-fee transactions if possible (default: %u)"), 0) + "\n"; - strUsage += " -spendzeroconfchange " + strprintf(_("Spend unconfirmed change when sending transactions (default: %u)"), 1) + "\n"; - strUsage += " -txconfirmtarget=<n> " + strprintf(_("If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: %u)"), 1) + "\n"; - strUsage += " -maxtxfee=<amt> " + strprintf(_("Maximum total fees to use in a single wallet transaction, setting too low may abort large transactions (default: %s)"), FormatMoney(maxTxFee)) + "\n"; - strUsage += " -upgradewallet " + _("Upgrade wallet to latest format") + " " + _("on startup") + "\n"; - strUsage += " -wallet=<file> " + _("Specify wallet file (within data directory)") + " " + strprintf(_("(default: %s)"), "wallet.dat") + "\n"; - strUsage += " -walletnotify=<cmd> " + _("Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)") + "\n"; - strUsage += " -zapwallettxes=<mode> " + _("Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup") + "\n"; - strUsage += " " + _("(1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data)") + "\n"; + strUsage += HelpMessageOpt("-mintxfee=<amt>", strprintf(_("Fees (in BTC/Kb) smaller than this are considered zero fee for transaction creation (default: %s)"), + FormatMoney(CWallet::minTxFee.GetFeePerK()))); + strUsage += HelpMessageOpt("-paytxfee=<amt>", strprintf(_("Fee (in BTC/kB) to add to transactions you send (default: %s)"), FormatMoney(payTxFee.GetFeePerK()))); + strUsage += HelpMessageOpt("-rescan", _("Rescan the block chain for missing wallet transactions") + " " + _("on startup")); + strUsage += HelpMessageOpt("-salvagewallet", _("Attempt to recover private keys from a corrupt wallet.dat") + " " + _("on startup")); + strUsage += HelpMessageOpt("-sendfreetransactions", strprintf(_("Send transactions as zero-fee transactions if possible (default: %u)"), 0)); + strUsage += HelpMessageOpt("-spendzeroconfchange", strprintf(_("Spend unconfirmed change when sending transactions (default: %u)"), 1)); + strUsage += HelpMessageOpt("-txconfirmtarget=<n>", strprintf(_("If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: %u)"), 1)); + strUsage += HelpMessageOpt("-maxtxfee=<amt>", strprintf(_("Maximum total fees to use in a single wallet transaction, setting too low may abort large transactions (default: %s)"), + FormatMoney(maxTxFee))); + strUsage += HelpMessageOpt("-upgradewallet", _("Upgrade wallet to latest format") + " " + _("on startup")); + strUsage += HelpMessageOpt("-wallet=<file>", _("Specify wallet file (within data directory)") + " " + strprintf(_("(default: %s)"), "wallet.dat")); + strUsage += HelpMessageOpt("-walletnotify=<cmd>", _("Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)")); + strUsage += HelpMessageOpt("-zapwallettxes=<mode>", _("Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup") + + " " + _("(1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data)")); + #endif - strUsage += "\n" + _("Debugging/Testing options:") + "\n"; + strUsage += HelpMessageGroup(_("Debugging/Testing options:")); if (GetBoolArg("-help-debug", false)) { - strUsage += " -checkpoints " + strprintf(_("Only accept block chain matching built-in checkpoints (default: %u)"), 1) + "\n"; - strUsage += " -dblogsize=<n> " + strprintf(_("Flush database activity from memory pool to disk log every <n> megabytes (default: %u)"), 100) + "\n"; - strUsage += " -disablesafemode " + strprintf(_("Disable safemode, override a real safe mode event (default: %u)"), 0) + "\n"; - strUsage += " -testsafemode " + strprintf(_("Force safe mode (default: %u)"), 0) + "\n"; - strUsage += " -dropmessagestest=<n> " + _("Randomly drop 1 of every <n> network messages") + "\n"; - strUsage += " -fuzzmessagestest=<n> " + _("Randomly fuzz 1 of every <n> network messages") + "\n"; - strUsage += " -flushwallet " + strprintf(_("Run a thread to flush wallet periodically (default: %u)"), 1) + "\n"; - strUsage += " -stopafterblockimport " + strprintf(_("Stop running after importing blocks from disk (default: %u)"), 0) + "\n"; + strUsage += HelpMessageOpt("-checkpoints", strprintf(_("Only accept block chain matching built-in checkpoints (default: %u)"), 1)); + strUsage += HelpMessageOpt("-dblogsize=<n>", strprintf(_("Flush database activity from memory pool to disk log every <n> megabytes (default: %u)"), 100)); + strUsage += HelpMessageOpt("-disablesafemode", strprintf(_("Disable safemode, override a real safe mode event (default: %u)"), 0)); + strUsage += HelpMessageOpt("-testsafemode", strprintf(_("Force safe mode (default: %u)"), 0)); + strUsage += HelpMessageOpt("-dropmessagestest=<n>", _("Randomly drop 1 of every <n> network messages")); + strUsage += HelpMessageOpt("-fuzzmessagestest=<n>", _("Randomly fuzz 1 of every <n> network messages")); + strUsage += HelpMessageOpt("-flushwallet", strprintf(_("Run a thread to flush wallet periodically (default: %u)"), 1)); + strUsage += HelpMessageOpt("-stopafterblockimport", strprintf(_("Stop running after importing blocks from disk (default: %u)"), 0)); } - strUsage += " -debug=<category> " + strprintf(_("Output debugging information (default: %u, supplying <category> is optional)"), 0) + "\n"; - strUsage += " " + _("If <category> is not supplied, output all debugging information.") + "\n"; - strUsage += " " + _("<category> can be:"); - strUsage += " addrman, alert, bench, coindb, db, lock, rand, rpc, selectcoins, mempool, net"; // Don't translate these and qt below + string debugCategories = "addrman, alert, bench, coindb, db, lock, rand, rpc, selectcoins, mempool, net"; // Don't translate these and qt below if (mode == HMM_BITCOIN_QT) - strUsage += ", qt"; - strUsage += ".\n"; + debugCategories += ", qt"; + strUsage += HelpMessageOpt("-debug=<category>", strprintf(_("Output debugging information (default: %u, supplying <category> is optional)"), 0) + ". " + + _("If <category> is not supplied, output all debugging information.") + _("<category> can be:") + " " + debugCategories + "."); #ifdef ENABLE_WALLET - strUsage += " -gen " + strprintf(_("Generate coins (default: %u)"), 0) + "\n"; - strUsage += " -genproclimit=<n> " + strprintf(_("Set the number of threads for coin generation if enabled (-1 = all cores, default: %d)"), 1) + "\n"; + strUsage += HelpMessageOpt("-gen", strprintf(_("Generate coins (default: %u)"), 0)); + strUsage += HelpMessageOpt("-genproclimit=<n>", strprintf(_("Set the number of threads for coin generation if enabled (-1 = all cores, default: %d)"), 1)); #endif - strUsage += " -help-debug " + _("Show all debugging options (usage: --help -help-debug)") + "\n"; - strUsage += " -logips " + strprintf(_("Include IP addresses in debug output (default: %u)"), 0) + "\n"; - strUsage += " -logtimestamps " + strprintf(_("Prepend debug output with timestamp (default: %u)"), 1) + "\n"; + strUsage += HelpMessageOpt("-help-debug", _("Show all debugging options (usage: --help -help-debug)")); + strUsage += HelpMessageOpt("-logips", strprintf(_("Include IP addresses in debug output (default: %u)"), 0)); + strUsage += HelpMessageOpt("-logtimestamps", strprintf(_("Prepend debug output with timestamp (default: %u)"), 1)); if (GetBoolArg("-help-debug", false)) { - strUsage += " -limitfreerelay=<n> " + strprintf(_("Continuously rate-limit free transactions to <n>*1000 bytes per minute (default:%u)"), 15) + "\n"; - strUsage += " -relaypriority " + strprintf(_("Require high priority for relaying free or low-fee transactions (default:%u)"), 1) + "\n"; - strUsage += " -maxsigcachesize=<n> " + strprintf(_("Limit size of signature cache to <n> entries (default: %u)"), 50000) + "\n"; + strUsage += HelpMessageOpt("-limitfreerelay=<n>", strprintf(_("Continuously rate-limit free transactions to <n>*1000 bytes per minute (default:%u)"), 15)); + strUsage += HelpMessageOpt("-relaypriority", strprintf(_("Require high priority for relaying free or low-fee transactions (default:%u)"), 1)); + strUsage += HelpMessageOpt("-maxsigcachesize=<n>", strprintf(_("Limit size of signature cache to <n> entries (default: %u)"), 50000)); } - strUsage += " -minrelaytxfee=<amt> " + strprintf(_("Fees (in BTC/Kb) smaller than this are considered zero fee for relaying (default: %s)"), FormatMoney(::minRelayTxFee.GetFeePerK())) + "\n"; - strUsage += " -printtoconsole " + _("Send trace/debug info to console instead of debug.log file") + "\n"; + strUsage += HelpMessageOpt("-minrelaytxfee=<amt>", strprintf(_("Fees (in BTC/Kb) smaller than this are considered zero fee for relaying (default: %s)"), FormatMoney(::minRelayTxFee.GetFeePerK()))); + strUsage += HelpMessageOpt("-printtoconsole", _("Send trace/debug info to console instead of debug.log file")); if (GetBoolArg("-help-debug", false)) { - strUsage += " -printpriority " + strprintf(_("Log transaction priority and fee per kB when mining blocks (default: %u)"), 0) + "\n"; - strUsage += " -privdb " + strprintf(_("Sets the DB_PRIVATE flag in the wallet db environment (default: %u)"), 1) + "\n"; - strUsage += " -regtest " + _("Enter regression test mode, which uses a special chain in which blocks can be solved instantly.") + "\n"; - strUsage += " " + _("This is intended for regression testing tools and app development.") + "\n"; - strUsage += " " + _("In this mode -genproclimit controls how many blocks are generated immediately.") + "\n"; + strUsage += HelpMessageOpt("-printpriority", strprintf(_("Log transaction priority and fee per kB when mining blocks (default: %u)"), 0)); + strUsage += HelpMessageOpt("-privdb", strprintf(_("Sets the DB_PRIVATE flag in the wallet db environment (default: %u)"), 1)); + strUsage += HelpMessageOpt("-regtest", _("Enter regression test mode, which uses a special chain in which blocks can be solved instantly.") + " " + + _("This is intended for regression testing tools and app development.") + " " + + _("In this mode -genproclimit controls how many blocks are generated immediately.")); } - strUsage += " -shrinkdebugfile " + _("Shrink debug.log file on client startup (default: 1 when no -debug)") + "\n"; - strUsage += " -testnet " + _("Use the test network") + "\n"; - - strUsage += "\n" + _("Node relay options:") + "\n"; - strUsage += " -datacarrier " + strprintf(_("Relay and mine data carrier transactions (default: %u)"), 1) + "\n"; - strUsage += " -datacarriersize " + strprintf(_("Maximum size of data in data carrier transactions we relay and mine (default: %u)"), MAX_OP_RETURN_RELAY) + "\n"; - - strUsage += "\n" + _("Block creation options:") + "\n"; - strUsage += " -blockminsize=<n> " + strprintf(_("Set minimum block size in bytes (default: %u)"), 0) + "\n"; - strUsage += " -blockmaxsize=<n> " + strprintf(_("Set maximum block size in bytes (default: %d)"), DEFAULT_BLOCK_MAX_SIZE) + "\n"; - strUsage += " -blockprioritysize=<n> " + strprintf(_("Set maximum size of high-priority/low-fee transactions in bytes (default: %d)"), DEFAULT_BLOCK_PRIORITY_SIZE) + "\n"; - - strUsage += "\n" + _("RPC server options:") + "\n"; - strUsage += " -server " + _("Accept command line and JSON-RPC commands") + "\n"; - strUsage += " -rest " + strprintf(_("Accept public REST requests (default: %u)"), 0) + "\n"; - strUsage += " -rpcbind=<addr> " + _("Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6. This option can be specified multiple times (default: bind to all interfaces)") + "\n"; - strUsage += " -rpcuser=<user> " + _("Username for JSON-RPC connections") + "\n"; - strUsage += " -rpcpassword=<pw> " + _("Password for JSON-RPC connections") + "\n"; - strUsage += " -rpcport=<port> " + strprintf(_("Listen for JSON-RPC connections on <port> (default: %u or testnet: %u)"), 8332, 18332) + "\n"; - strUsage += " -rpcallowip=<ip> " + _("Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times") + "\n"; - strUsage += " -rpcthreads=<n> " + strprintf(_("Set the number of threads to service RPC calls (default: %d)"), 4) + "\n"; - strUsage += " -rpckeepalive " + strprintf(_("RPC support for HTTP persistent connections (default: %d)"), 1) + "\n"; - - strUsage += "\n" + _("RPC SSL options: (see the Bitcoin Wiki for SSL setup instructions)") + "\n"; - strUsage += " -rpcssl " + _("Use OpenSSL (https) for JSON-RPC connections") + "\n"; - strUsage += " -rpcsslcertificatechainfile=<file.cert> " + strprintf(_("Server certificate file (default: %s)"), "server.cert") + "\n"; - strUsage += " -rpcsslprivatekeyfile=<file.pem> " + strprintf(_("Server private key (default: %s)"), "server.pem") + "\n"; - strUsage += " -rpcsslciphers=<ciphers> " + strprintf(_("Acceptable ciphers (default: %s)"), "TLSv1.2+HIGH:TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!3DES:@STRENGTH") + "\n"; + strUsage += HelpMessageOpt("-shrinkdebugfile", _("Shrink debug.log file on client startup (default: 1 when no -debug)")); + strUsage += HelpMessageOpt("-testnet", _("Use the test network")); + + strUsage += HelpMessageGroup(_("Node relay options:")); + strUsage += HelpMessageOpt("-datacarrier", strprintf(_("Relay and mine data carrier transactions (default: %u)"), 1)); + strUsage += HelpMessageOpt("-datacarriersize", strprintf(_("Maximum size of data in data carrier transactions we relay and mine (default: %u)"), MAX_OP_RETURN_RELAY)); + + strUsage += HelpMessageGroup(_("Block creation options:")); + strUsage += HelpMessageOpt("-blockminsize=<n>", strprintf(_("Set minimum block size in bytes (default: %u)"), 0)); + strUsage += HelpMessageOpt("-blockmaxsize=<n>", strprintf(_("Set maximum block size in bytes (default: %d)"), DEFAULT_BLOCK_MAX_SIZE)); + strUsage += HelpMessageOpt("-blockprioritysize=<n>", strprintf(_("Set maximum size of high-priority/low-fee transactions in bytes (default: %d)"), DEFAULT_BLOCK_PRIORITY_SIZE)); + + strUsage += HelpMessageGroup(_("RPC server options:")); + strUsage += HelpMessageOpt("-server", _("Accept command line and JSON-RPC commands")); + strUsage += HelpMessageOpt("-rest", strprintf(_("Accept public REST requests (default: %u)"), 0)); + strUsage += HelpMessageOpt("-rpcbind=<addr>", _("Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6. This option can be specified multiple times (default: bind to all interfaces)")); + strUsage += HelpMessageOpt("-rpcuser=<user>", _("Username for JSON-RPC connections")); + strUsage += HelpMessageOpt("-rpcpassword=<pw>", _("Password for JSON-RPC connections")); + strUsage += HelpMessageOpt("-rpcport=<port>", strprintf(_("Listen for JSON-RPC connections on <port> (default: %u or testnet: %u)"), 8332, 18332)); + strUsage += HelpMessageOpt("-rpcallowip=<ip>", _("Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times")); + strUsage += HelpMessageOpt("-rpcthreads=<n>", strprintf(_("Set the number of threads to service RPC calls (default: %d)"), 4)); + strUsage += HelpMessageOpt("-rpckeepalive", strprintf(_("RPC support for HTTP persistent connections (default: %d)"), 1)); + + strUsage += HelpMessageGroup(_("RPC SSL options: (see the Bitcoin Wiki for SSL setup instructions)")); + strUsage += HelpMessageOpt("-rpcssl", _("Use OpenSSL (https) for JSON-RPC connections")); + strUsage += HelpMessageOpt("-rpcsslcertificatechainfile=<file.cert>", strprintf(_("Server certificate file (default: %s)"), "server.cert")); + strUsage += HelpMessageOpt("-rpcsslprivatekeyfile=<file.pem>", strprintf(_("Server private key (default: %s)"), "server.pem")); + strUsage += HelpMessageOpt("-rpcsslciphers=<ciphers>", strprintf(_("Acceptable ciphers (default: %s)"), "TLSv1.2+HIGH:TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!3DES:@STRENGTH")); return strUsage; } diff --git a/src/util.cpp b/src/util.cpp index 361b3631f5..792f00b61d 100644 --- a/src/util.cpp +++ b/src/util.cpp @@ -346,6 +346,21 @@ bool SoftSetBoolArg(const std::string& strArg, bool fValue) return SoftSetArg(strArg, std::string("0")); } +static const int screenWidth = 79; +static const int optIndent = 2; +static const int msgIndent = 7; + +std::string HelpMessageGroup(const std::string &message) { + return std::string(message) + std::string("\n\n"); +} + +std::string HelpMessageOpt(const std::string &option, const std::string &message) { + return std::string(optIndent,' ') + std::string(option) + + std::string("\n") + std::string(msgIndent,' ') + + FormatParagraph(message, screenWidth - msgIndent, msgIndent) + + std::string("\n\n"); +} + static std::string FormatException(const std::exception* pex, const char* pszThread) { #ifdef WIN32 diff --git a/src/util.h b/src/util.h index 4d0cb7136e..9b5a4153dd 100644 --- a/src/util.h +++ b/src/util.h @@ -162,6 +162,23 @@ bool SoftSetArg(const std::string& strArg, const std::string& strValue); */ bool SoftSetBoolArg(const std::string& strArg, bool fValue); +/** + * Format a string to be used as group of options in help messages + * + * @param message Group name (e.g. "RPC server options:") + * @return the formatted string + */ +std::string HelpMessageGroup(const std::string& message); + +/** + * Format a string to be used as option description in help messages + * + * @param option Option message (e.g. "-rpcuser=<user>") + * @param message Option description (e.g. "Username for JSON-RPC connections") + * @return the formatted string + */ +std::string HelpMessageOpt(const std::string& option, const std::string& message); + void SetThreadPriority(int nPriority); void RenameThread(const char* name); |