diff options
60 files changed, 1080 insertions, 355 deletions
diff --git a/contrib/devtools/optimize-pngs.py b/contrib/devtools/optimize-pngs.py index b6d6a097d6..799e0cc7d0 100755 --- a/contrib/devtools/optimize-pngs.py +++ b/contrib/devtools/optimize-pngs.py @@ -1,6 +1,6 @@ #!/usr/bin/env python ''' -Run this scrip every time you change one of the png files. Using pngcrush, it will optimize the png files, remove various color profiles, remove ancillary chunks (alla) and text chunks (text). +Run this script every time you change one of the png files. Using pngcrush, it will optimize the png files, remove various color profiles, remove ancillary chunks (alla) and text chunks (text). #pngcrush -brute -ow -rem gAMA -rem cHRM -rem iCCP -rem sRGB -rem alla -rem text ''' import os @@ -18,12 +18,12 @@ def content_hash(filename): '''Return hash of RGBA contents of image''' i = Image.open(filename) i = i.convert('RGBA') - data = i.tostring() + data = i.tobytes() return hashlib.sha256(data).hexdigest() pngcrush = 'pngcrush' git = 'git' -folders = ["src/qt/res/movies", "src/qt/res/icons"] +folders = ["src/qt/res/movies", "src/qt/res/icons", "share/pixmaps"] basePath = subprocess.check_output([git, 'rev-parse', '--show-toplevel']).rstrip('\n') totalSaveBytes = 0 noHashChange = True diff --git a/contrib/gitian-descriptors/gitian-linux.yml b/contrib/gitian-descriptors/gitian-linux.yml index 440d95a355..a98a71e2f9 100644 --- a/contrib/gitian-descriptors/gitian-linux.yml +++ b/contrib/gitian-descriptors/gitian-linux.yml @@ -24,7 +24,7 @@ files: [] script: | WRAP_DIR=$HOME/wrapped HOSTS="i686-pc-linux-gnu x86_64-unknown-linux-gnu" - CONFIGFLAGS="--enable-upnp-default --enable-glibc-back-compat --enable-reduce-exports LDFLAGS=-static-libstdc++" + CONFIGFLAGS="--enable-glibc-back-compat --enable-reduce-exports LDFLAGS=-static-libstdc++" FAKETIME_HOST_PROGS="" FAKETIME_PROGS="date ar ranlib nm strip" diff --git a/contrib/gitian-descriptors/gitian-osx.yml b/contrib/gitian-descriptors/gitian-osx.yml index bad9a0e768..eeeb408ded 100644 --- a/contrib/gitian-descriptors/gitian-osx.yml +++ b/contrib/gitian-descriptors/gitian-osx.yml @@ -27,7 +27,7 @@ files: script: | WRAP_DIR=$HOME/wrapped HOSTS="x86_64-apple-darwin11" - CONFIGFLAGS="--enable-upnp-default --enable-reduce-exports GENISOIMAGE=$WRAP_DIR/genisoimage" + CONFIGFLAGS="--enable-reduce-exports GENISOIMAGE=$WRAP_DIR/genisoimage" FAKETIME_HOST_PROGS="" FAKETIME_PROGS="ar ranlib date dmg genisoimage" diff --git a/contrib/gitian-descriptors/gitian-win.yml b/contrib/gitian-descriptors/gitian-win.yml index 966820ec51..5fa0db6784 100644 --- a/contrib/gitian-descriptors/gitian-win.yml +++ b/contrib/gitian-descriptors/gitian-win.yml @@ -26,7 +26,7 @@ files: [] script: | WRAP_DIR=$HOME/wrapped HOSTS="x86_64-w64-mingw32 i686-w64-mingw32" - CONFIGFLAGS="--enable-upnp-default --enable-reduce-exports" + CONFIGFLAGS="--enable-reduce-exports" FAKETIME_HOST_PROGS="g++ ar ranlib nm windres strip" FAKETIME_PROGS="date makensis zip" diff --git a/contrib/gitian-downloader/bluematt-key.pgp b/contrib/gitian-downloader/bluematt-key.pgp Binary files differindex fb6d9eb284..2389d4657f 100644 --- a/contrib/gitian-downloader/bluematt-key.pgp +++ b/contrib/gitian-downloader/bluematt-key.pgp diff --git a/contrib/gitian-downloader/btcdrak-key.pgp b/contrib/gitian-downloader/btcdrak-key.pgp new file mode 100644 index 0000000000..60d76c0ec7 --- /dev/null +++ b/contrib/gitian-downloader/btcdrak-key.pgp @@ -0,0 +1,142 @@ +-----BEGIN PGP PUBLIC KEY BLOCK----- +Version: GnuPG v2 + +mQINBFWpKewBEACzsuhtkin1MdQCKCEcFypjEstg0jA0nNVOpsGDTtdwfMpWiLJH +bV7b3V1p5hgaPdSyZsUezvHbkVEQxmU47C9lwph3svu6v8HInBwnOa5zj4L0Ih18 +7yfeEJOvWzULzNxtiIqvWQBFxrVBbgHMhUMg0j6KCYOWeTmTuUKgvbQB8dExCoV9 +7l+mb0k6eOZhwGWl6KD8mVkdhfXhoCZY5g79BTJf7lAQqnVbjxdyEKD2HSSs5Jnx +mTeZg40ottXa1puT+x9ES7L/IOY5kcrp6lU8iyKAoUS4vOJt4nPqY59Pr9j2nUak +2BUY0yojH41a752OYW59R+0uTNcUAwpNFucOb4TrNqjGJaPtxvFBZPTLImfSE+Jj +VTT6eZixOXPlOWm/7PgR66JF70p3gDwCL19bwUeOKX3UbkjhmYG48d9y1FNFZlVM +Yf36xj0c2IOz34VVY6GcCfnIN6xus5qWgHWiQ6RRdlRc9TbcCsUGttXuFP/n4nX2 +OHo6I/HBNidLScfD2sXZtYHLcqvi2CcvEmmDdwBZrZncz+cHpjz8xmONb3bEMNT0 +euPcEC5PXUItCSk9KHSgJhAWqfB2WcZ0RUYLp5lbtIZGHqY34LJRWXVKeOQIq4Gn +8uCyM5oQUY9zK4x7fdRz5tOjInYg+eSqtnLVDACqmazQHZ6kuGspAvwW8QARAQAB +tBtCdGNEcmFrIDxidGNkcmFrQGdtYWlsLmNvbT6JAj0EEwECACgFAlWpKewCGwEF +CQWjmoAGCwkIBwMCBhUIAgkKCwQWAgMBAh4BAheAAAoJEOXROPXnOhryKiAP+L3B +4c4eZcp8OSRwtYMiNmlxqhzEe+Va8T748rP8oULBFi7b7Nw9FILtp0Vtt2Xw9Pd9 +EMsv5ZfgPpFL58ZeaO5f4uyrxipfUE5XdhkMOtqqlTfuCGh5fvNv1sWgf5tOFS2+ +4TCtcSSywl/OlbRmWW/rsJ+RPrE32iSn171WRUXmGGBGSTF2mxCELLIW/rnY1qUw +u81BN4SYQOSyd1ha4XAlVYnPcEdpD5mBhwh2mdw7nCtJ9G/lPJ+1VT5axsONbEKK +utoU8CRt7OBlAUe0GbAcp7FcniKaFF2nUuhNbMjFcqZ9pddb6aWHVcaXIHwjoR8T +Br8ygIoODNEauc0e1xbtsXByD76pcz3yzZOFCKxtjtjsln23Drko4JA2LyLxx8WY +BCZcf8/8QSZJOocFOoUIHEfdljo/41kF1MF1Ra2Pr5ZHx/qNcI3U+4+uBoc1AuWS +5gJl6xXicLByqweSGKzAfq+SGXM+8ZdJ5KuHISMq7tfkzkmIJ7fRy+cdprXYVnhK +CW5EWA6+xQqpt0QGaOyRPJvQqJJvO42Eg9slHkfON1499pwaIwblWuNRs/jq5xCY +b21m50JmPas6o5lCcF0SFiFLEJa8spWxMrsLZGUf8KfwriDrssw0XzI74E//BFb0 +8TLeC7daL3bsCe3FD/Nlcplz0oPKOm6Zb7fNf8mJAYEEEwEIAGsFAlWtJa0FgwWf +nr9eFIAAAAAAFQBAYmxvY2toYXNoQGJpdGNvaW4ub3JnMDAwMDAwMDAwMDAwMDAw +MDEzNjM5NmE3M2YxOTBmZDRiMjRkMmNjOWM5N2UxNDgxMjcyZWI1YjE3YzU1YzVm +MgAKCRB/qxFCZ+T6BHGbB/9wvhZ2rgT4vOT7HENDXF+Bv9TItBF7JQ4mehCenWme +23qxBLttfQp3AbwA2K2FyrshGM0fmtmpO5pcXjjHMVzlIDa1fKvbQGbhok5Y+94w +hswGS8O0XTU6sB3JxC4vpqdS1pryA/7g3YI+EuzYCkubNxvYnAy80Rf098xZzj2r +Yov2c73qg8+kb+5MS2fTjOMQhJo8N70YOew9FVOeZoeepv7SWLDI5Ya/YQ+1fFKN +2ovfBq/fzAD4PJbPJCz0miq1T5GL2nTXLcJmj46uV3wNvppNm/w8492de5VO0JqG +qlRurp6Jp2k37jqRSIIXG2wxCkND0cYftjS13pHnerPyuQENBFWpKiUBCADiSsd/ +CmoZV2/UCqAnxm5/kxF8rW5hVYsYmfGO6lY868j5GMOVhWkrjl2CNWrFwQRqyiol +FNvyOro2IpOGXlM87AU3MP2/Zz+zkO3zY4ZH40t/UqcO2MPpKdkmGofCt+C6IFGS +Y23FqdfOLxV3aczN2aLzL2C6hHdXTcs99NGSf51iHLXn9b+hT4k2AxLPnOnnjgJL +eC6+s2sh4loSuvCh5FjVQfhQDLyTn93r9xvEhUMUUxBLz1Iy+e+w1elSwqNT5wEI +V5Iontm63lN37GrkRyX90PBtKf6VYXE1yKhNLmPBOIc1vx02og6Psu5eilzKfoK/ +tQeYr4M/6HOcNvEnABEBAAGJAiUEGAECAA8FAlWpKiUCGwwFCQHhM4AACgkQ5dE4 +9ec6GvJmFQ/+IoBituRcR394sVPiK7apDIPzPziVT4Qu8aBuHHREhK1Vl5C5tLZ7 +Q6wA5Xc6O2/G+37HqKX3rqD7XBdFwcPXQa6g54uVs8l2+1UIwnFqZm8bJwubkHU7 +U6addHacbX2itqb4EiQ82mAQqPSwx36QGLtPF2htl5z1XWj6queqjVrteAl2cbz5 +KKGklTjReaX1jmun/3nL1yJuYRpZ0L7lF3IU17FVckCL/y3CXhdWOK1fGRfsnZWe +XQT+00dKhW5uRfpa8hR1/HJnaczAZnjjpRJZq8hBLamTjPypwjLf+gFAPiAJRuug +Bh4saYoE3ciNDzB3B7RR8oqNwxaF316vurrcKqEvnpQechFudDKYz6Pd09lFM1U2 +MlyJ/jMwwlEvwoTlKFvgYmXOHPZoyf4Vdq+RPfRy+pDI1et9fN4wsy/Foj5hb7Yw +/hPOAjWElc4huCwaHIbGN+gHd+AbO6dOkWC7GgsOTGopyU0NXWfud7HB1V/NQ7o1 +EMrEEPg3eMBMpksuNJ4TaesJ3keW+9OwIMDvsIGcRvqcAVL0R0ZkMGiYG3ITna7l +KRcCZwWaHmE6WJTuffBu9oyRFfSH6YbI4pFuFulxghNe3gD1AFZyWPlS/M6jw87I +4nBWSNoyPs1UxEGtntBkWiBJq79WAUSAeiDPVzvekQfaZxSpCrZh1cy5AQ0EVapR +MwEIAIpPUS3x6zTo9YoFxf2CCNho62MZfoN4ZpVQyY+NLhZ0p1XQBullafZdQjF2 +mGPXysg7SEZflkcwBGjS6B/CJUoe+zGRL0DXrpoGrqEZzDshiOQ7lM08iloZ9X7V +UqhZdi7CFQCO9lAPgrFnvlTVvc7z+1L01/I+9H+w7rmnVsa4NyR/3W1zpOjAO7Wh +telWGTcLGYM5fWE3XnUTsWHUQnvdJ9qkDQB6emAOSzBreGmxzru1VSKIPrGsYmlW +Q/5Z82ihJ9uCYswUmh+hXRnAXTZTw9jQ+/hw75YuKUGjxXnMGJPMWIlBgB65h1fz +a6cTU1ZuS/wEEWEsiDWIob+B4qUAEQEAAYkCPgQoAQoAKAUCVd+TsSEdA0xvc3Qg +aW4gbWFsZnVuY3Rpb25pbmcgaGFyZHdhcmUACgkQ5dE49ec6GvIMfQ//SVwsyixG +w77pubV8R3LHjVqjo8CNWR2CedzT2/2xfRqjiz9juxpVSunPLTCUWhJTp8bAJzVY +UteZ3G1ctKuA/cnUbiAduU4CNlKrZ6AjmUysPVrsyw3kUDm8LSKKiARb0hCAFbvO +AO3Lm0YbpBtVYOUpWLoxpkFPx4PKRSyS+mkmFCgBV3baf6YOfPimGyEkVOhF5vZ9 +WDjnlxPHWhjrpWOpWYPOlDMfSxsvYe4JTd/QXEqx0Ki1inNM4AnLiDf/rnyliQiQ +RFlHNnfo/FyqO9wvY8Hu0YLUJqee3WWTVDoYnQYSdHVM8w5JYXiUG8Cc8H2kQ79f +sYwIQEXPdJUCeFYnWwkltAjd95AvNDv/5/4kSBBGWUY80TH8qoxuPLekPmuvS8QE +TP2AeEcL8Hi5GnKbl9xb3bu/cuauLp1D23qC3HMoigFEgUPQ3egB7Z66PVWo+ko9 ++niqujCFBZBmkS23fvp4EgejYkvvhH9NcWDXWhnIaghLq6ngrj+zHDTTb5dCp9aM +JKOyKZIjEtT+AOi8g7yQ7bDyI0eJxOhKamBcVYHcvUU3DMsRSao8cEE6ee/G9564 +sQ15Ma7W+wqee8SbaND84A2tAQcFtd7kvRn8C3Ac/bHuL5UIihNruTzOsfIHlXmE +jqjNA37tatNGoAK6//UHCzX6rLZSBUJtsDWJA0QEGAECAA8FAlWqUTMCGwIFCQHh +M4ABKQkQ5dE49ec6GvLAXSAEGQECAAYFAlWqUTMACgkQ3qOE7dYp+kBF2AgAiI8O +mFVfhCSJl7ofMMO2g92JfeWevQsn+GITexaYs/FEBb4NmWAyItJ1mL0jCVOhRXwj +AcKbKiWhuco17EdXi3xvu5FrfsN/lOmmyhkKyHSR+LS2XPb+xG5JJrafS7m2nxMx +4m0yH6tUcsBnqBPFFZ+w+Fxtg8ngUbo9B/gaXr7mvHwir0P2LYpcqlwpD0Zxmu1W +HpKT/DQa09Zjr5l9WDGtF6U6ZuSH8sdh/tD///x7AJ6eoiYadcy3YWRLFKKpfMSI +tSDhOlWBFFNRwrsZRXCrETYoJNWb/kvcHOaWNzPWcePjQ5RdOkQwnidUd1iy/Uqr +2+cT9WWfkHAND4uHlP1wD/sF+nQWOoWcQLFqTx9qt9h7tbgNAzXfEec7fwQ+NMwS +bKocjb5OOdzInEMDufusOWgKBfJtPQSMUe+W2orxBWtJb7WY9Xeshjs4q42GooPz +e9AN5B2M1V+wmSYEMyhHSTldjj/ZUWBmzZGH7skPHFUwFB633NOA97Mrt/F1RhiO +kw1TTn61x1op+wF919DnKdXaFiFX02XzqjJgnuUoGN/72cnfRzIkSaq9b9uX/dQK +z2Uk19ENQ3ipmAqBnzOzz+kjSqh8PdHgTGSyy8Ump8+dfhXjC98wVwP6YEn7tOv0 +iaRzOiKd2kkCvSYexiqWYtKLU8icUFmvd6SROkcAHhPr1+oPS7LJpYDuES17iN3X +YaYHGGyvNsh1RseJvE7saosVGQwM539W61JUS9A3TP5jaL8ka8Q5AiXyIee+CD5h +2wFQnvdnmnc4QVkdVdrpNRBZyGySgyrO9E+iogfMSfcdDApgiETUOuMTvuCZSPhQ +YZ3+rddfgyDXYN3y5oW7Piro19r6R0D7DcGSstk1+1mEjJbb7s5Gc7oGq+EgLm0K +VYKa4Ky12osPCHFAoYLHe2upSHFhtgPgfzHKE8Uo5hnAVmx9jAi2XxBi4y5ezPPD +C0cCKsRTVrbvNavTSMYdfcxWuB4vlrMZIsvV0RcyP9jPXZm3XPrMik8xRbLR9AzR +C7kBDQRVqlGOAQgArkX9q/xZbvceeW0vzxI1UfbZnVoO3E+lL8W40RtBoF7R/7bD +68/dNYa1/geUc1jVyrycdp5RkTfnHnIHDt1WZfi6Ywdw9val+BpT/X9ZkxEXgYxO +tzMq0zO+ipeLgiqBRck7kgsOEgv+zaqMFXXrH+Zbsg1QbDEug61iCoKzpR8b2+5Z +QHxklnGd1RbiMWpioTmacOQE9yTfWvastJXIvZoZ8gdaLR8hA5o/ePP+GcSgntAd +NlMYTqqNujAymBJvMAu+ybyFRKN/L/X+IX2elhJWM1x4d1OjM/4sk31g6pucWRcd +vimPWouDIWVh+sh1g/IRsO295QKzXUCDELc/QQARAQABiQI4BCgBCgAiBQJV35N0 +Gx0Da2V5IGxvc3QgaW4gZmF1bHR5IGRvbmdsZQAKCRDl0Tj15zoa8lAJD/93voL9 +dqZ9IViyULsWsEkQDD20HQ+mxbuJcAE526If/x9JIMR1JcuE/C7pAtNjg5VBCOeB +sk0JC+Z7M80ivU1xov+rmjRvVNAX22/rBLpCTmUe0gzIBnWG5+O2/sccutigvvQE +O1rqLTEp0dzLoYbVAwJedELZnmK04Y8uXXQ1XSHXJOJmvEBpbDF0U3FXl7Sw4C+u +hI8IR6l2D/BYKIZgNIkh4ppFa6RJY0DtEWR94POZYBjjjToeCTRBG9IxudDy1jm4 +k6bF/ByOecN4B3HRcBXUM1yJEmOZlPSZu2v7XvFp2VnFJfN2UjmtpYsKamV/xUsw +DE0voGp15TOfb+6QzfnLSI7vXcm1CfkBS++lYKcYcJ9Kj90ZPjtKy25vKcBvG68o +nYgS0Jnzm6j2yE2KBc90CWS1Txgu1Rd5ZrP8pM1ZK20/dq9CjtPLE94WFIc77k0R +3z8DJPG8I8M2RJ1XoqENrBvG5U0B+eeGA7mY8QSRH0COhslJ7j0WjOyO8xBSGTCq +QKGppFmDLs440cCVUOpnPz1kYG3YFgdCsFxOQ1GBJuHFLUdA1BEbb/nG4C4+y3Ek +Bihhu+3ZRoaBgE7ZmVOMEV7xdslPNssiTh+CxIUtugY2mhGnANvEcWrqTgG9+EHf +ax2avHR4CQMn7onZAPt2sOMoPkE8R3H3Knlta4kCJQQYAQIADwUCVapRjgIbIAUJ +AeEzgAAKCRDl0Tj15zoa8rK4EACFfSUffkm80uzBxFDbo3+fWf2k5hnjXheZxE5w +gpT4Z6QGH70GjR+rbH5a6fMM4hkmqNRYWLf6n8RTYNvCLxopVg2l1QbHYFbA+pAB +0tM7HOng8iyvc+uUJ4hTicpePm66A4uc1/z+mr5mcLTQS6Nfix2j3hduzzCVIbuF +/3UUxS9hFAXOu1F1Oz6auFkeQ8R/w/49yXrq/MYYSUsWtOR66Yu4664TJKBkZGlw +CiGPYmpeE7To7LqdhAop+ZnZnc5agSnB9QZw1HVbMY0nwbPuiJx+6mmbh7Gf/OHu +2pHSAStvFUGA6ngbYVH2LlRC2XgAA/yFAy1FNFegxTXO+3DI9ykj/3WBmjbNZMIA +mhcvPPwwJCNdxbZJbCcot82FBGPpwmsiZJWynD4m4+aGErp/pZmKjfMwP5NAgOQd +77XaRlJTvW4GqAdmT0ib7tCqGwFAx5o80SszhgRCUqu8oLGAUlTfMoRgmFNRznP9 +7xptwjNSl19YrlXdgbhOvVvNO0/J6uXnRc3v9yfaa8J7xU6GvuR5smejYNLUxccl +N1UmouS3Vol5z6hOmqnembN/zC3THOHqmJ1G6SdiCcn5dG5Tc+jmBKLRAnoIimWT +dO/UoWhm2EB40Hlj6HRFXure47oD9x28d48E0+HI9Jzlh4Wuu6kkr+ugOpdC0TbN +H/+RObkBDQRV35PpAQgAo1+V52e+8VFsDKyceNNEVE8NdUiPRKBZuVfCSP8nqNCj +hYf4lY/iygHCNZDtKaBs6BUCj0Ev1CLm+Uxvdl1trEr1FGz8E1kdUsh0LocKJgjh +wbuDrxM/6LNBxYTR9fEIGx+ka8o9OMLqWav+QjZtDC/nTWaJkXxvcgZPhadCmkkz +P0g/vnJVYbvDBBmxI9ofkxZIrwNR2Y8VO2oLVP0MpCA06cuUQWym/gQ2uqBToGqr +M/gc+vq0XQyFrNmH/iP8MuASrOoQfGhvZDg/x8rcFRs37itZWpUfP3pZ5zWztX3G +TBtc1EktSjs8fU828lPxtG80r4RB2sWVDJfoqhi7XQARAQABiQNEBBgBCgAPBQJV +35PpAhsCBQkB4TOAASkJEOXROPXnOhrywF0gBBkBCgAGBQJV35PpAAoJEPxkNPw6 +MelWLCsH/R69Q2jgT2+sHVWbDsmNjTOkJIteKbz0uW8/vBJqZ2VEwKozGruCTkNI +orYKj52ZRcxKiAijN2XGw1TEccP0s5Trap1Z+xgjDDLByLswoVBUzAjbq77hedT+ +ZUuQFKnm0Cc+PzB/Nz96I8AV4AxYc7RW4keGtvEv7qgdIlb6fbPpFB7Z5W573OZ7 +G72B/T6QL43HRaN+ZbjwRJaY66tYKSl0Vd0WrO2p5xVdbTarVFn6q/A0IYEafVKY +QaRTh+VQbN7vNZCn1Gi6fvnjtWRsj0vMkafdAzVYqF42P+cf6iHrglE6DwR5AsaS +O9G+8kLpkXFRjDQJBaijWdBtaeOulCxTog/7BZwo1kpTC3ZCTxr/SHJDc1Nsxt8K +xnMCPxFSrHRJb/fUQDjhLv6lXXAm5SCBdFzAc9oDKUbcuGSEz2nZQjL1OADn9rVo +j/Y6wJ+okOCOs9AI1H+VW/rz5Z7wxvw3YOVa+dnYdV0w7FklCn+xFdZLj8Z5WjcZ +zoyqGlVAFGOZ4MbO+fz/+8f0Y7K/bW7E6smhnomTy2ZOk64eiO12d8quHTHMi7Xh +mmVYDiNn1gW9IxZwt/Ga9AvZbIAYhL2m/xBbdfMKAG7Ttjzd3Ac+8wrGm3lOesBD +AJUtBmURu8b1Eyj72IQcV0AJM8gvc1B0H345oX6VBgkBB0bf3nuUVftv6r529jTr +Jix6yrs4uf25tefzcFuqqE1s1r+pSZFIDpaNsP+jjMgYj/zn4dLOZaq4V3SHvnsU +v8KOUC2/qNH9U0KC6bh4mw0fVsHzhkaOjOM7SF1Doc8Lz4vZuk4BpumHpkHEG90x +CLg2k/R9iIDQfcGtKY++1/GitjXakPuKrJctZ1SJuW1KWyzFeF4qvuowmLGMFRVi ++CG5JJSLCUr+cPXa8NbjZv9BwSHqWbn3grr7ZE/j6SFNhuLmByeePPNKRt0cae6a +3TQkQFh/yvSIkB5BrB1n2x+xNoWMME+GR0zYQCOncCe8W+a5BZ1mTiVGacHgVqSN +eEaG0RH54+pi4gw= +=fFMC +-----END PGP PUBLIC KEY BLOCK----- diff --git a/contrib/gitian-downloader/prab-key.pgp b/contrib/gitian-downloader/prab-key.pgp index 0940d15c6a..0870c88b9b 100644 --- a/contrib/gitian-downloader/prab-key.pgp +++ b/contrib/gitian-downloader/prab-key.pgp @@ -1,29 +1,81 @@ -----BEGIN PGP PUBLIC KEY BLOCK----- Version: GnuPG v2 -mQINBFI3uQUBEADRjbUQb65n7sfjT5OPnjPO8oUh5onKjNALRGHGJxWwNkwkgmT6 -mZFWjikM8B3ONEp8MfTyoOzv+MbWuBDS1GZxi0Tcb4HU323/7hhwfXV4bcHif7vq -Sc1ahN/5LIHj0htC6Uj78IWXW+kPWjX9biRJnZ9eerfA/AatC+4KuvYTjAa9uAfa -BnAs38EG/7ryXzxdz6M8iNB/YjHE72swSH84uTtA3LqI3huVY41eFMK6qXFBMFiq -H6bMx4pjwKzJj78bibXEQxq88yc6TLxbURs2GF4s11dr7Iq2Y+6FHqX3PfUByZBz -PQfbEy1Df4RbB3htCBv5puETlqZ0PVe9/B+WrcnaobxrbKEAqt0DspfoveRTIL+z -+YDs7FuW9TFBmd+5d2nmblHrNm8eEig3DpOoVetuuXsmDy03Fwao7hGkva4P3xbP -H4/U8GaxsfNzuLvEyy+dtd2t2C1HIxS+56r41/vdb/9rvGgEQuSr0DVpZIW9en0f -3bek+H7/qRCbXuaiBACBvOKNror5jtTeXTvnHWMkrOItyGH9pwR2Lhhv68JQS1jk -e3pwVRzfHBz4wQMHeLIh+blsVKCIjytBR8Rq36rsmN1q44/3HwuPW/XP61kPP90k -dKyPF4Qa+EoPw5ON5nr3lWy8ysklM79o1NmpyqNT4UjtDDBSfJtX82ct8QARAQAB -tB9QYXVsIFJhYmFoeSA8UFJhYmFoeUBnbWFpbC5jb20+iQI/BBMBAgApBQJSN7kF -AhsPBQkDwdj7BwsJCAcDAgEGFQgCCQoLBBYCAwECHgECF4AACgkQ0cuiohvNiPaB -KA//Y6h6r8vUkA4/Gl2ejMgH+/DAolg9dFD+KMjQNKw16g7WzFNNS05T4RhcfZDT -mapAW2LOUiiPVJTacmblyFp2hXCv3S+DESQjVdz15pxMHkt9fFteXGyJyrcTY5pR -rZmjMD/9Twy2mLl5IH5ms87p0TN9HhM5Ux+B51la+Uq1wMdc1PdPWvGDeBVxCnRI -w0224M5u1uHaMwMDGdz6sXuCuonB7CDGL9Z2+m1Al7t0peL2QdKHjv8S+SKM2rZS -bRJyNmmTSKFQOTb9e2Ve48NNeaC0usEf8ttsygclps0mDpoa68YSY1LiuwVoIxvd -S626eDqgmq1yyz0l3gQbYKIUv7KvRDnYhqIEkPZLCOwKirm+I5vzXvVIlfoNRoyJ -VH3K6MJDSpBEerYNWHmUQpp7cLXIqVtako7IgmglOXQ5XVRnPvlOt5VOqQnNRTdM -nd/FK3n1TbUyNRverODSpOS6ZxdSSwLkTycTtj1SvpLo7laW0HQ1ofJfwzVmOq8s -8aWWTwBBC/X1UNLL/rsZMoHeUpaKHF2HSK5XzLcwqOBPRTMY0OG7vtBvj4G8clht -A3uQmmCMr6RxsPPYPHPO3MnMpY2AK6RRnNZg5Y1Fu+/71FAuUDVTxmI402yE5XbP -ILbJ8RgsrTVgeHdNhp9or0BdsB/wwMT5intkCaNqwb6eJag= -=y2Va +mQINBFYHMLQBEADLpvMbTQZ28jaV/tEcHpt/a2YiIqBdNreh6rE2MkTTjdkZJ5Mp +RAFOTrRYRWyBL9jmCjvjt4TToiV4quv9ubRWdTKn0cKaqcl8kwZ5rtoX6EEhcLJO +CAL13kDzkBrG3OqRxM7VWn/0IGf++Eq0yT2eqBi7Ae3FvC4m64TKLI2NK7GB/MQD +JqcXuh/0yMsPiCNZrTDBX+3SzTuSLjWt2Le1Ap2nWXf68cWqP6nhT+f76epZyA4D +NI48/KeylUzPSJtqBmBM+YLg/XGcxDpbIotnr7D27ThJQIXDzut9O9f7RjdlKaeh +G73W/hDqTqLpkR5LMa7K3unUuvlyQqYGXfHINjJibNUTLCi7YcJtuDv/DJwQxu45 +/UUYS2xH6HpgOTdWs6VjHRCDzeAoKzkdDB+8Mvi2lZXxY0iFQeQtRNkmN9D3M4oT +voG0cZWjPGeKSalGVSRS3TGhdf+IqOPhOl9yrwEArlZ8HtsTUFdx/jAsWHsycCVb +LjkD8Mdgit39UZCln3e0bY862wF7Gm7P3ITMnTofO9w6Pqffh9WWQBtLrxIXrgII +vstC8H9ajIl1FDuYs1Mf8u7iq1zHh6GNzoxkm+FEvYc3mkSfx6KJD3STWqSrJcQK +q/1SsjBb+RiuqeFdY8krWfm2xkuUoGLEQnr14UQz1hQTTLEgSoHBSHxuHwARAQAB +tB9QYXVsIFJhYmFoeSA8UFJhYmFoeUBnbWFpbC5jb20+iQI5BBMBCAAjBQJWBzC0 +AhsDBwsJCAcDAgEGFQgCCQoLBBYCAwECHgECF4AACgkQvNBNjpzMrCp8dA//Yaob +cnFuzLjIeWyz996DPJvU62WmAE4GkZot/wk+dtIAnOCxO9YbhWVU/b1WG2PjGdqt +LiB6COG28/HzJoUh2zjG0lDcjvu060Bdw9rQ/kJWW22ylNAoKiY9jd3Abde5nBGK +0wwJ8+aMMDrO6euwgcJymJ+yZ6ZiWyG4TXXCbSdCDSsBtaaAugMlzZWeyEBEgUK4 +nX3ZCoNiF3s2bYojr6VcgG2clM9gsSBW03XLW3lRLOvDFmdEAFp8KSJNSkGBlcOS +iba6zAKTY80W/+D3soBP6Lr2uP0AOFr+ZnfxvaH9YvXIFDq/jT3CH2RxiZLd1m59 +ehUbU878ebOMlJCJYiUBY6H+vChytqy51o1np+KTQtpxKzigWiPbtyJ9zYoVVczI +Ds8APCqL729BPMhhTDm8I9jeEhjXNmmiJjGVJGVB5X/3w+7jQrEz6f1Ebi+cCrgN +tfN22bMs9hh5KkQ4JhRVfDM0DOXCvokXjdo9yXUf+Doc96ruCJKH0qR9L7qIASiD +hSEK3CNGY1G05Bb4wCS+FrexL11whAxlX7HCwbgjgHu07QJBYITdn3J4fUFYGsyS +G/2D5aLASiKGfq2TL1G9e/qI49/TksDQ6Xy4ue4cQYbf6JigfYjDcSDOZmkHPuXG +kSd60WPWJT6OqLrhq2c7exYCUGZaKrWBoie5yoGJAhwEEAEIAAYFAlYHcWAACgkQ +0cuiohvNiPY3BQ//TVOxm3UncyGyXOs+ss3fBSPE5q3lR71H4uo4CxE5pi9Y10tK +Qf0ULe0gRpnF2FMUkCCE5hu2oG+kPpqKON8/jwcnRCO9h2AndIZ3NRPAOXO2pn9f +bkDHMlInhPUxDk5zCHMTOdCONDvhocZ69gYHJdgt4w3Joji1YxTkHr2n8dFyNY7Q +LgqT1tpuXgopjKsUcYRhDCRN/iFsMa4D+XZR+rflvX5hkee19DzUIWmaHitfHZlo +VsJ7uVZKqUevS3rbBr3i+tpvvlrqDXAGksGWOdK7QFD6GtRgOD91IB82K0NvyX6t +M0TMh/aAAslxfH3YeTIGnETuBkp9QBCa1c966ipoHyzItmK9sF/ONPEfYR/ad3gB +Nc4G5w0UEROX0v4AWMfYc2CD+un3beH6rkWnopsIRJcQ71XvufqweWsPFALuBBzR +PTiugTi0SSSr/ayA543s90Ko2Fxrg20UYJZj1u/DEukpNJwjRSS/yyjk0hMWtzW8 +rY1Br4Djbq3uQQj8EQojHgg3vlpHcbO77kXIJAlWYIzfHY69RGXCQG6Y7tavIiXm +vveP54CPFCs8Kl9t8Pq0IrWKnBGklE/KwfMzkzvrKFmi+nk9yRgwyN9G/geQt4Vo +W2mHmO1lvY8Zu2zpzLkvkYGXpL1VkIefmBYV/SWgyYGhLOJIFodJcMrrnje5AQ0E +Vgc1VQEIALsxaGYOnwWdgE2e7zX4uFz7jY5fZh0+RqGOe+Sk2g/QVKEDSLDgVF/V +tneG8AFgYukHPFCm0IZdKrewrkzdQOwxjyxiyFxOV/LYPesElVe8OWIs0lrMrWlL +ZLDguF63wnxWhjolfBzQAG29UTXYaJt6onEB59R2l426LBl3W9wvq19jolOECISw +r9z2IRUJ3poqBckT9j11p8yuPjGyht90dvg4htGPBV7nHDIijUnqLfk9mnAj8NwW +2Gf7TwW2uNA2rHV6riFzYVe2t1sB5Gdlx5ostJzo67yIc5Dffca901VhmpJTUPox +W2KmTpl3ObvaS0U0mkAyVObVHSuT6UsAEQEAAYkDRAQYAQgADwUCVgc1VQIbAgUJ +A8JnAAEpCRC80E2OnMysKsBdIAQZAQgABgUCVgc1VQAKCRAyXl7AXCempkrrB/9H +tOAstawkJ1IflUztgknEDE7MWuNR5XGqN7ROJAZvL8YfB5J7a4HJxTzCWft2QQUu +x3uwSfBpm+hRftBjm4aACrhDS6OOH4eFOUIdDASb2lgnhLmygKhAO9LW2z8jSrRs +tKNj9nyCo56mtd2awFESgpskavv/ilc9wU830C82FFdyBqgy5OBdWBurnb3SV5F7 +23uD1t1n8b9gseIxNdF6Q//szAeHa4VRzzqykExXqHCEFCtH2gs9EjiZ3YeCyygK +cPbe6/+FP6UD810PBqnWaCShOIeT56JsOu2gMZ5+epWB+piUTn38N2Znu3EA3Q64 +Gc7P8AtrNUCv56bof5NoTuwP/0rP4n1bsTy7siBuPqc9YvYkVCxNsGmg1Qs5h2Jr +ZmQlAnz8JXfi/TRxarUNQTZEsXVQzq+4C9eEMey440kXvDE2sd3p4MKnbtkDmahJ +XcMG5lsMMAQTpmyBf1EBEIFOwjZBqUqEkHl4FGRpEx/Q2p9/pVlogGW7SE5Ck6W/ +A63ClJUJLsHaWiv9zJ23tzT+ooNy/iO1Y+GfV6MY1tBfLd4ZHHd2n1urFB362sgY +2x1TfvfXN0Myw7m1X0l9bYFycuuWfSo6qK+LCU/4P3jm21+i9lWBYX5l+NLz5mlC +V5aN57zmtGK7QMSp+6VY8mwG1TuhUt91S2fEScLax6qEASiEChB8m3YJOjKycP27 +Sq9WactijiVTPslHjCNfyM4BbE9crAbDWGkIbzbka8ix3t4uBWt0YO0Ug9S3eZBt +w1OVxUI+LWjF5XlkfXn8W+pZ/C+M9Cs6QsAXEbfHXVZKwlAGZfvYE25UTr11RRnY +pl8JZglq0Z2Gip3YzJewC1pjjQTnnPoPT79elBuPmiGwNm5L8HsKUZ1IMf1k5mQB +FX0CilHMF/JAO+r8Obs1l7FHXvO0a95tStcjpFodZjHARi5B3VGghcypy2J9hWfH +YF23EcE4GzpqqSEO/SJoxuLNNtj5ZVJOxmeRz2CKCe1sI8xO7wY7ckjRaGmrvK+c +dAxeuQENBFYHOocBCACxVJwkGbqcgKTrg6APMxWO77ielcac8FOVpd0ns1h4TGZM +iCwwTR5WPRiIA6zuS3VTuPAntnK3VF9fQsLBORHIb4CzMeU3F/64SPt8NFajEQ+P +vPsZlyv29RSVmvhIRDTDry3Z/KQxnZ3rzazrBqGVuLBgsG45n97MQ8Xq0gkY42jU +VDldULYGMco5zHj/MFSQ6L3z0j1lL+aiX2xIdRyDNzOhRqaA1ByZvsRSsqW2JWox +78c6AbclWw0QLdQd4Pxk8k5hpeN/EtneVnFDX3hOq/C9fZs6f5aAKn81WXqPPPk6 +G0b7KzlUoCWGlO7M5LzEzWmWvGPs7W8y2Uil99CVABEBAAGJAiUEGAEIAA8FAlYH +OocCGwwFCQPCZwAACgkQvNBNjpzMrCr50BAApY22DRYqmtALFieREu78BvjQT/DY +f9Smkga1YVr9/Ph9NJ5iSVeM8mrVkwZnGRK1UCjk16rsmB70IqlnJnyJGXqPMj7M +3ioOWY8fCL8fmLI2g0TbXXKl3e0nGByGXW4pwyLYa/hR7XJMco/PxqIGhEKcCIRP +dxq/6U9T9SYe2IkfXBYZAxfUTE2FkRpw1zSfZN3z32LM7ICZ26NRHRWo4Kv5sij4 +0mYYecFmWdf6ib5pPCI0HmPGpblbmZgR1LoJNmuNxfpgEnPe8BbxtO4mueNW5A39 +y7gLCmDZ8MaOGxvjGByBoXxXP62BiU910iZZZurjSD+3FD+NUX0m4yxVIZCkuInY +QzLxFACr26IYpcsPHIYGnEjDBFw9hHdP6tzKbjzgVSZESheQf2zwit0YYSjwHQN/ +XGnBy8+p66As61jg8mcAN2Zd8vwFKZOvfEnSsaoK5ssAh8jixhPj+Ujgs0/PB8t/ +ON20yr+YRAwU+RVnC/vfvrM83mjoz4mbmSLapFz/xWNhoS0ZczYEI5CyxE8peGPX +gd/7tim2OqUuZ3SlH5TZP3pdJcqxTNN7iNaWy1wAY/sb8As3Pge/Vv5hSYmHNjQy +h/62SSbTf6OZCuUGjy8fvVj51SclVKqGNprmAqVrIy0J+VeTKj4r7PGesPWJavRc +RFdDYRHByRDDL1I= +=dOwX -----END PGP PUBLIC KEY BLOCK----- diff --git a/depends/config.guess b/depends/config.guess index f357ec6c8f..3c022c5bb8 100755 --- a/depends/config.guess +++ b/depends/config.guess @@ -2,7 +2,7 @@ # Attempt to guess a canonical system name. # Copyright 1992-2015 Free Software Foundation, Inc. -timestamp='2015-03-04' +timestamp='2015-09-14' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -221,7 +221,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in release='-gnu' ;; *) - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + release=`echo ${UNAME_RELEASE} | sed -e 's/[-_].*//' | cut -d. -f1,2` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: @@ -249,6 +249,9 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} exit ;; + *:Sortix:*:*) + echo ${UNAME_MACHINE}-unknown-sortix + exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) @@ -962,6 +965,9 @@ EOF ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; + k1om:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; m32r*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; @@ -1038,7 +1044,7 @@ EOF echo ${UNAME_MACHINE}-dec-linux-${LIBC} exit ;; x86_64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo ${UNAME_MACHINE}-pc-linux-${LIBC} exit ;; xtensa*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} @@ -1117,7 +1123,7 @@ EOF # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i586. # Note: whatever this is, it MUST be the same as what config.sub - # prints for the "djgpp" host, or else GDB configure will decide that + # prints for the "djgpp" host, or else GDB configury will decide that # this is a cross-build. echo i586-pc-msdosdjgpp exit ;; diff --git a/depends/config.sub b/depends/config.sub index 8f1229c6f7..1acc966a33 100755 --- a/depends/config.sub +++ b/depends/config.sub @@ -2,7 +2,7 @@ # Configuration validation subroutine script. # Copyright 1992-2015 Free Software Foundation, Inc. -timestamp='2015-03-08' +timestamp='2015-08-20' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -255,6 +255,7 @@ case $basic_machine in | arc | arceb \ | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ | avr | avr32 \ + | ba \ | be32 | be64 \ | bfin \ | c4x | c8051 | clipper \ @@ -305,7 +306,7 @@ case $basic_machine in | riscv32 | riscv64 \ | rl78 | rx \ | score \ - | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ @@ -376,6 +377,7 @@ case $basic_machine in | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* | avr32-* \ + | ba-* \ | be32-* | be64-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* \ @@ -428,12 +430,13 @@ case $basic_machine in | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ | pyramid-* \ + | riscv32-* | riscv64-* \ | rl78-* | romp-* | rs6000-* | rx-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \ | tahoe-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tile*-* \ @@ -1376,7 +1379,7 @@ case $os in | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ | -sym* | -kopensolaris* | -plan9* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* | -aros* | -cloudabi* \ + | -aos* | -aros* | -cloudabi* | -sortix* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ diff --git a/depends/packages/openssl.mk b/depends/packages/openssl.mk index 22b1017ffc..687aae6682 100644 --- a/depends/packages/openssl.mk +++ b/depends/packages/openssl.mk @@ -10,7 +10,7 @@ $(package)_config_opts=--prefix=$(host_prefix) --openssldir=$(host_prefix)/etc/o $(package)_config_opts+=no-krb5 no-camellia no-capieng no-cast no-cms no-dtls1 no-gost no-gmp no-heartbeats no-idea no-jpake no-md2 $(package)_config_opts+=no-mdc2 no-rc5 no-rdrand no-rfc3779 no-rsax no-sctp no-seed no-sha0 no-static_engine no-whirlpool no-rc2 no-rc4 no-ssl2 no-ssl3 $(package)_config_opts+=$($(package)_cflags) $($(package)_cppflags) -$(package)_config_opts_linux=-fPIC +$(package)_config_opts_linux=-fPIC -Wa,--noexecstack $(package)_config_opts_x86_64_linux=linux-x86_64 $(package)_config_opts_i686_linux=linux-generic32 $(package)_config_opts_arm_linux=linux-generic32 diff --git a/doc/README.md b/doc/README.md index 3e3f4a294f..08fd724355 100644 --- a/doc/README.md +++ b/doc/README.md @@ -7,7 +7,7 @@ Setup Running --------------------- -The following are some helpful notes on how to run Bitcoin on your native platform. +The following are some helpful notes on how to run Bitcoin on your native platform. ### Unix @@ -26,7 +26,7 @@ Unpack the files into a directory and run: Unpack the files into a directory, and then run bitcoin-qt.exe. -### OSX +### OS X Drag Bitcoin-Qt to your applications folder, and then run Bitcoin-Qt. @@ -41,7 +41,7 @@ Building --------------------- The following are developer notes on how to build Bitcoin on your native platform. They are not complete guides, but include notes on the necessary libraries, compile flags, etc. -- [OSX Build Notes](build-osx.md) +- [OS X Build Notes](build-osx.md) - [Unix Build Notes](build-unix.md) - [Gitian Building Guide](gitian-building.md) diff --git a/doc/README_osx.txt b/doc/README_osx.txt index a572c7a241..f589bfc676 100644 --- a/doc/README_osx.txt +++ b/doc/README_osx.txt @@ -1,12 +1,12 @@ -Deterministic OSX Dmg Notes. +Deterministic OS X Dmg Notes. -Working OSX DMGs are created in Linux by combining a recent clang, +Working OS X DMGs are created in Linux by combining a recent clang, the Apple's binutils (ld, ar, etc), and DMG authoring tools. Apple uses clang extensively for development and has upstreamed the necessary functionality so that a vanilla clang can take advantage. It supports the use of -F, -target, -mmacosx-version-min, and --sysroot, which are all necessary -when building for OSX. A pre-compiled version of 3.2 is used because it was not +when building for OS X. A pre-compiled version of 3.2 is used because it was not available in the Precise repositories at the time this work was started. In the future, it can be switched to use system packages instead. @@ -29,18 +29,18 @@ originally done in toolchain4. To complicate things further, all builds must target an Apple SDK. These SDKs are free to download, but not redistributable. -To obtain it, register for a developer account, then download the XCode 6.1.1 dmg: +To obtain it, register for a developer account, then download the Xcode 6.1.1 dmg: https://developer.apple.com/devcenter/download.action?path=/Developer_Tools/xcode_6.1.1/xcode_6.1.1.dmg This file is several gigabytes in size, but only a single directory inside is needed: Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk Unfortunately, the usual linux tools (7zip, hpmount, loopback mount) are incapable of opening this file. -To create a tarball suitable for gitian input, mount the dmg in OSX, then create it with: +To create a tarball suitable for Gitian input, mount the dmg in OS X, then create it with: $ tar -C /Volumes/Xcode/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/ -czf MacOSX10.9.sdk.tar.gz MacOSX10.9.sdk -The gitian descriptors build 2 sets of files: Linux tools, then Apple binaries +The Gitian descriptors build 2 sets of files: Linux tools, then Apple binaries which are created using these tools. The build process has been designed to avoid including the SDK's files in Gitian's outputs. All interim tarballs are fully deterministic and may be freely redistributed. @@ -64,20 +64,20 @@ Ideally, the creation could be fixed and genisoimage would no longer be necessar Background images and other features can be added to DMG files by inserting a .DS_Store before creation. The easiest way to create this file is to build a -DMG without one, move it to a device running OSX, customize the layout, then +DMG without one, move it to a device running OS X, customize the layout, then grab the .DS_Store file for later use. That is the approach taken here. -As of OSX Mavericks (10.9), using an Apple-blessed key to sign binaries is a +As of OS X Mavericks (10.9), using an Apple-blessed key to sign binaries is a requirement in order to satisfy the new Gatekeeper requirements. Because this private key cannot be shared, we'll have to be a bit creative in order for the build process to remain somewhat deterministic. Here's how it works: -- Builders use gitian to create an unsigned release. This outputs an unsigned +- Builders use Gitian to create an unsigned release. This outputs an unsigned dmg which users may choose to bless and run. It also outputs an unsigned app structure in the form of a tarball, which also contains all of the tools that have been previously (deterministically) built in order to create a final dmg. - The Apple keyholder uses this unsigned app to create a detached signature, using the script that is also included there. -- Builders feed the unsigned app + detached signature back into gitian. It +- Builders feed the unsigned app + detached signature back into Gitian. It uses the pre-built tools to recombine the pieces into a deterministic dmg. diff --git a/doc/build-openbsd.md b/doc/build-openbsd.md index a26b52465e..d923301467 100644 --- a/doc/build-openbsd.md +++ b/doc/build-openbsd.md @@ -38,7 +38,7 @@ Do not use `pkg_add boost`! The boost version installed thus is compiled using t test_bitcoin:/usr/lib/libstdc++.so.57.0: /usr/local/lib/libestdc++.so.17.0 : WARNING: symbol(_ZN11__gnu_debug17_S_debug_me ssagesE) size mismatch, relink your program ... - Segmentation fault (core dumped) + Segmentation fault (core dumped) This makes it necessary to build boost, or at least the parts used by Bitcoin Core, manually: @@ -57,7 +57,7 @@ tar -xjf boost_1_59_0.tar.bz2 # Boost 1.59 needs two small patches for OpenBSD cd boost_1_59_0 # Also here: https://gist.githubusercontent.com/laanwj/bf359281dc319b8ff2e1/raw/92250de8404b97bb99d72ab898f4a8cb35ae1ea3/patch-boost_test_impl_execution_monitor_ipp.patch -patch -p0 < /usr/ports/devel/boost/patches/patch-boost_test_impl_execution_monitor_ipp +patch -p0 < /usr/ports/devel/boost/patches/patch-boost_test_impl_execution_monitor_ipp # https://github.com/boostorg/filesystem/commit/90517e459681790a091566dce27ca3acabf9a70c sed 's/__OPEN_BSD__/__OpenBSD__/g' < libs/filesystem/src/path.cpp > libs/filesystem/src/path.cpp.tmp mv libs/filesystem/src/path.cpp.tmp libs/filesystem/src/path.cpp @@ -92,7 +92,7 @@ tar -xzf db-4.8.30.NC.tar.gz # Build the library and install to specified prefix cd db-4.8.30.NC/build_unix/ # Note: Do a static build so that it can be embedded into the executable, instead of having to find a .so at runtime -../dist/configure --enable-cxx --disable-shared --with-pic --prefix=$BDB_PREFIX CC=egcc CXX=eg++ CPP=ecpp +../dist/configure --enable-cxx --disable-shared --with-pic --prefix=$BDB_PREFIX CC=egcc CXX=eg++ CPP=ecpp make install ``` @@ -160,4 +160,3 @@ version installed by OpenBSD 5.7: - https://llvm.org/bugs/show_bug.cgi?id=9758 There is no known workaround for this. - diff --git a/doc/build-osx.md b/doc/build-osx.md index 201fe9522b..69c401b751 100644 --- a/doc/build-osx.md +++ b/doc/build-osx.md @@ -1,6 +1,6 @@ Mac OS X Build Instructions and Notes ==================================== -This guide will show you how to build bitcoind (headless client) for OSX. +This guide will show you how to build bitcoind (headless client) for OS X. Notes ----- @@ -13,8 +13,8 @@ built-in one is located in `/Applications/Utilities`. Preparation ----------- -You need to install XCode with all the options checked so that the compiler -and everything is available in /usr not just /Developer. XCode should be +You need to install Xcode with all the options checked so that the compiler +and everything is available in /usr not just /Developer. Xcode should be available on your OS X installation media, but if not, you can get the current version from https://developer.apple.com/xcode/. If you install Xcode 4.3 or later, you'll need to install its command line tools. This can @@ -38,7 +38,7 @@ NOTE: Building with Qt4 is still supported, however, could result in a broken UI ### Building `bitcoind` -1. Clone the github tree to get the source code and go into the directory. +1. Clone the GitHub tree to get the source code and go into the directory. git clone https://github.com/bitcoin/bitcoin.git cd bitcoin @@ -62,7 +62,7 @@ Use Qt Creator as IDE You can use Qt Creator as IDE, for debugging and for manipulating forms, etc. Download Qt Creator from http://www.qt.io/download/. Download the "community edition" and only install Qt Creator (uncheck the rest during the installation process). -1. Make sure you installed everything through homebrew mentioned above +1. Make sure you installed everything through Homebrew mentioned above 2. Do a proper ./configure --with-gui=qt5 --enable-debug 3. In Qt Creator do "New Project" -> Import Project -> Import Existing Project 4. Enter "bitcoin-qt" as project name, enter src/qt as location diff --git a/doc/developer-notes.md b/doc/developer-notes.md index 8302a78562..4189d22187 100644 --- a/doc/developer-notes.md +++ b/doc/developer-notes.md @@ -1,5 +1,5 @@ -Coding Standards -================ +Developer Notes +=============== Various coding styles have been used during the history of the codebase, and the result is not very consistent. However, we're now trying to converge to @@ -57,7 +57,7 @@ As Doxygen recognizes the comments by the delimiters (`/**` and `*/` in this cas To describe a class use the same construct above the class definition: ```c++ -/** +/** * Alerts are for notifying old versions if they become too obsolete and * need to upgrade. The message is displayed in the status bar. * @see GetWarnings() diff --git a/doc/dnsseed-policy.md b/doc/dnsseed-policy.md index 814ae3876a..55a5c28258 100644 --- a/doc/dnsseed-policy.md +++ b/doc/dnsseed-policy.md @@ -7,7 +7,7 @@ As such, DNS seeds must be run by entities which have some minimum level of trust within the Bitcoin community. Other implementations of Bitcoin software may also use the same -seeds and may be more exposed. In light of this exposure, this +seeds and may be more exposed. In light of this exposure, this document establishes some basic expectations for operating dnsseeds. 0. A DNS seed operating organization or person is expected to follow good diff --git a/doc/gitian-building.md b/doc/gitian-building.md index 265fbd586d..00fdce82e8 100644 --- a/doc/gitian-building.md +++ b/doc/gitian-building.md @@ -1,7 +1,7 @@ Gitian building ================ -*Setup instructions for a gitian build of Bitcoin using a Debian VM or physical system.* +*Setup instructions for a Gitian build of Bitcoin using a Debian VM or physical system.* Gitian is the deterministic build process that is used to build the Bitcoin Core executables. It provides a way to be reasonably sure that the @@ -13,7 +13,7 @@ Multiple developers build the source code by following a specific descriptor These results are compared and only if they match, the build is accepted and uploaded to bitcoin.org. -More independent gitian builders are needed, which is why this guide exists. +More independent Gitian builders are needed, which is why this guide exists. It is preferred you follow these steps yourself instead of using someone else's VM image to avoid 'contaminating' the build. @@ -22,9 +22,9 @@ Table of Contents - [Create a new VirtualBox VM](#create-a-new-virtualbox-vm) - [Connecting to the VM](#connecting-to-the-vm) -- [Setting up Debian for gitian building](#setting-up-debian-for-gitian-building) -- [Installing gitian](#installing-gitian) -- [Setting up the gitian image](#setting-up-the-gitian-image) +- [Setting up Debian for Gitian building](#setting-up-debian-for-gitian-building) +- [Installing Gitian](#installing-gitian) +- [Setting up the Gitian image](#setting-up-the-gitian-image) - [Getting and building the inputs](#getting-and-building-the-inputs) - [Building Bitcoin](#building-bitcoin) - [Building an alternative repository](#building-an-alternative-repository) @@ -43,7 +43,7 @@ Any kind of virtualization can be used, for example: - [KVM](http://www.linux-kvm.org/page/Main_Page) - [LXC](https://linuxcontainers.org/), see also [Gitian host docker container](https://github.com/gdm85/tenku/tree/master/docker/gitian-bitcoin-host/README.md). -You can also install gitian on actual hardware instead of using virtualization. +You can also install Gitian on actual hardware instead of using virtualization. Create a new VirtualBox VM --------------------------- @@ -60,18 +60,18 @@ In the VirtualBox GUI click "Create" and choose the following parameters in the  - Hard Disk: Create a virtual hard disk now - +  -- Hard Disk file type: Use the default, VDI (VirtualBox Disk Image) +- Hard Disk file type: Use the default, VDI (VirtualBox Disk Image)  - -- Storage on physical hard disk: Dynamically Allocated - + +- Storage on physical hard disk: Dynamically Allocated +  -- File location and size: at least 40GB; as low as 20GB *may* be possible, but better to err on the safe side +- File location and size: at least 40GB; as low as 20GB *may* be possible, but better to err on the safe side - Click `Create` Get the [Debian 8.x net installer](http://cdimage.debian.org/debian-cd/8.2.0/amd64/iso-cd/debian-8.2.0-amd64-netinst.iso) (a more recent minor version should also work, see also [Debian Network installation](https://www.debian.org/CD/netinst/)). @@ -81,7 +81,7 @@ Unixy OSes by entering the following in a terminal: echo "d393d17ac6b3113c81186e545c416a00f28ed6e05774284bb5e8f0df39fcbcb9 debian-8.2.0-amd64-netinst.iso" | sha256sum -c # (must return OK) -After creating the VM, we need to configure it. +After creating the VM, we need to configure it. - Click the `Settings` button, then go to the `Network` tab. Adapter 1 should be attached to `NAT`. @@ -115,8 +115,8 @@ This section will explain how to install Debian on the newly created VM.  -**Note**: Navigating in the Debian installer: -To keep a setting at the default and proceed, just press `Enter`. +**Note**: Navigating in the Debian installer: +To keep a setting at the default and proceed, just press `Enter`. To select a different button, press `Tab`. - Choose locale and keyboard settings (doesn't matter, you can just go with the defaults or select your own information) @@ -126,23 +126,23 @@ To select a different button, press `Tab`.  - The VM will detect network settings using DHCP, this should all proceed automatically -- Configure the network: +- Configure the network: - Hostname `debian`. - Leave domain name empty.  -- Choose a root password and enter it twice (remember it for later) +- Choose a root password and enter it twice (remember it for later)  -- Name the new user `debian` (the full name doesn't matter, you can leave it empty) +- Name the new user `debian` (the full name doesn't matter, you can leave it empty) - Set the account username as `debian`   -- Choose a user password and enter it twice (remember it for later) +- Choose a user password and enter it twice (remember it for later)  @@ -152,11 +152,11 @@ To select a different button, press `Tab`.  - Disk setup - - Partitioning method: Guided - Use the entire disk - + - Partitioning method: Guided - Use the entire disk +  - - Select disk to partition: SCSI1 (0,0,0) + - Select disk to partition: SCSI1 (0,0,0)  @@ -166,7 +166,7 @@ To select a different button, press `Tab`.  - The base system will be installed, this will take a minute or so -- Choose a mirror (any will do) +- Choose a mirror (any will do)  @@ -201,7 +201,7 @@ After Installation The next step in the guide involves logging in as root via SSH. SSH login for root users is disabled by default, so we'll enable that now. -Login to the VM using username `root` and the root password you choose earlier. +Login to the VM using username `root` and the root password you chose earlier. You'll be presented with a screen similar to this.  @@ -243,7 +243,7 @@ For example, to connect as `root` from a Linux command prompt use Replace `root` with `debian` to log in as user. -Setting up Debian for gitian building +Setting up Debian for Gitian building -------------------------------------- In this section we will be setting up the Debian installation for Gitian building. @@ -260,7 +260,7 @@ Then set up LXC and the rest with the following, which is a complex jumble of se ```bash # the version of lxc-start in Debian 7.4 needs to run as root, so make sure -# that the build script can exectute it without providing a password +# that the build script can execute it without providing a password echo "%sudo ALL=NOPASSWD: /usr/bin/lxc-start" > /etc/sudoers.d/gitian-lxc # add cgroup for LXC echo "cgroup /sys/fs/cgroup cgroup defaults 0 0" >> /etc/fstab @@ -280,7 +280,7 @@ reboot At the end the VM is rebooted to make sure that the changes take effect. The steps in this section only need to be performed once. -Installing gitian +Installing Gitian ------------------ Re-login as the user `debian` that was created during installation. @@ -300,14 +300,14 @@ cd .. **Note**: When sudo asks for a password, enter the password for the user *debian* not for *root*. -Clone the git repositories for bitcoin and gitian. +Clone the git repositories for bitcoin and Gitian. ```bash git clone https://github.com/devrandom/gitian-builder.git git clone https://github.com/bitcoin/bitcoin ``` -Setting up the gitian image +Setting up the Gitian image ------------------------- Gitian needs a virtual image of the operating system to build in. @@ -333,14 +333,14 @@ Getting and building the inputs Follow the instructions in [doc/release-process.md](release-process.md#fetch-and-build-inputs-first-time-or-when-dependency-versions-change) in the bitcoin repository under 'Fetch and build inputs' to install sources which require manual intervention. Also optionally follow the next step: 'Seed the Gitian sources cache -and offline git repositories' which will fetch the remaining files required for building +and offline git repositories' which will fetch the remaining files required for building offline. Building Bitcoin ---------------- -To build Bitcoin (for Linux, OSX and Windows) just follow the steps under 'perform -gitian builds' in [doc/release-process.md](release-process.md#perform-gitian-builds) in the bitcoin repository. +To build Bitcoin (for Linux, OS X and Windows) just follow the steps under 'perform +Gitian builds' in [doc/release-process.md](release-process.md#perform-gitian-builds) in the bitcoin repository. This may take some time as it will build all the dependencies needed for each descriptor. These dependencies will be cached after a successful build to avoid rebuilding them when possible. @@ -380,7 +380,7 @@ Building an alternative repository ----------------------------------- If you want to do a test build of a pull on GitHub it can be useful to point -the gitian builder at an alternative repository, using the same descriptors +the Gitian builder at an alternative repository, using the same descriptors and inputs. For example: @@ -395,9 +395,9 @@ COMMIT=2014_03_windows_unicode_path Building fully offline ----------------------- -For building fully offline including attaching signatures to unsigned builds, the detached-sigs repository +For building fully offline including attaching signatures to unsigned builds, the detached-sigs repository and the bitcoin git repository with the desired tag must both be available locally, and then gbuild must be -told where to find them. It also requires an apt-cacher-ng which is fully-populated but set to offline mode, or +told where to find them. It also requires an apt-cacher-ng which is fully-populated but set to offline mode, or manually disabling gitian-builder's use of apt-get to update the VM build environment. To configure apt-cacher-ng as an offline cacher, you will need to first populate its cache with the relevant @@ -417,7 +417,7 @@ LXC_ARCH=amd64 LXC_SUITE=precise on-target -u root \ -e DEBIAN_FRONTEND=noninteractive apt-get --no-install-recommends -y install \ $( sed -ne '/^packages:/,/[^-] .*/ {/^- .*/{s/"//g;s/- //;p}}' ../bitcoin/contrib/gitian-descriptors/*|sort|uniq ) LXC_ARCH=amd64 LXC_SUITE=precise on-target -u root apt-get -q -y purge grub -LXC_ARCH=amd64 LXC_SUITE=precise on-target -u root -e DEBIAN_FRONTEND=noninteractive apt-get -y dist-upgrade +LXC_ARCH=amd64 LXC_SUITE=precise on-target -u root -e DEBIAN_FRONTEND=noninteractive apt-get -y dist-upgrade ``` And then set offline mode for apt-cacher-ng: @@ -431,7 +431,7 @@ Offlinemode: 1 service apt-cacher-ng restart ``` -Then when building, override the remote URLs that gbuild would otherwise pull from the gitian descriptors:: +Then when building, override the remote URLs that gbuild would otherwise pull from the Gitian descriptors:: ```bash cd /some/root/path/ @@ -461,7 +461,7 @@ in `gitian.sigs` to your signing machine and do ``` This will create the `.sig` files that can be committed together with the `.assert` files to assert your -gitian build. +Gitian build. Uploading signatures --------------------- diff --git a/doc/init.md b/doc/init.md index ed9ce72154..d24c2d1dbf 100644 --- a/doc/init.md +++ b/doc/init.md @@ -29,20 +29,20 @@ file, however it is recommended that a strong and secure password be used as this password is security critical to securing the wallet should the wallet be enabled. -If bitcoind is run with the "-server" flag (set by default), and no rpcpassword is set, -it will use a special cookie file for authentication. The cookie is generated with random +If bitcoind is run with the "-server" flag (set by default), and no rpcpassword is set, +it will use a special cookie file for authentication. The cookie is generated with random content when the daemon starts, and deleted when it exits. Read access to this file -controls who can access it through RPC. +controls who can access it through RPC. -By default the cookie is stored in the data directory, but it's location can be overridden +By default the cookie is stored in the data directory, but it's location can be overridden with the option '-rpccookiefile'. This allows for running bitcoind without having to do any manual configuration. -`conf`, `pid`, and `wallet` accept relative paths which are interpreted as +`conf`, `pid`, and `wallet` accept relative paths which are interpreted as relative to the data directory. `wallet` *only* supports relative paths. -For an example configuration file that describes the configuration settings, +For an example configuration file that describes the configuration settings, see `contrib/debian/examples/bitcoin.conf`. 3. Paths @@ -93,8 +93,8 @@ use old versions of Upstart and do not supply the start-stop-daemon utility. Copy bitcoind.init to /etc/init.d/bitcoind. Test by running `service bitcoind start`. -Using this script, you can adjust the path and flags to the bitcoind program by -setting the BITCOIND and FLAGS environment variables in the file +Using this script, you can adjust the path and flags to the bitcoind program by +setting the BITCOIND and FLAGS environment variables in the file /etc/sysconfig/bitcoind. You can also use the DAEMONOPTS environment variable here. 5. Auto-respawn @@ -102,4 +102,3 @@ setting the BITCOIND and FLAGS environment variables in the file Auto respawning is currently only configured for Upstart and systemd. Reasonable defaults have been chosen but YMMV. - diff --git a/doc/release-notes.md b/doc/release-notes.md index 78ab3516f6..e9b2d75a76 100644 --- a/doc/release-notes.md +++ b/doc/release-notes.md @@ -181,7 +181,7 @@ configured specifically to process scriptPubKey and not scriptSig scripts. - Removed bitrpc.py from contrib -Addition of ZMQ-based Notifcations +Addition of ZMQ-based Notifications ================================== Bitcoind can now (optionally) asynchronously notify clients through a diff --git a/doc/release-notes/release-notes-0.10.3.md b/doc/release-notes/release-notes-0.10.3.md new file mode 100644 index 0000000000..8a110e562c --- /dev/null +++ b/doc/release-notes/release-notes-0.10.3.md @@ -0,0 +1,165 @@ +Bitcoin Core version 0.10.3 is now available from: + + <https://bitcoin.org/bin/bitcoin-core-0.10.3/> + +This is a new minor version release, bringing security fixes and translation +updates. It is recommended to upgrade to this version as soon as possible. + +Please report bugs using the issue tracker at github: + + <https://github.com/bitcoin/bitcoin/issues> + +Upgrading and downgrading +========================= + +How to Upgrade +-------------- + +If you are running an older version, shut it down. Wait until it has completely +shut down (which might take a few minutes for older versions), then run the +installer (on Windows) or just copy over /Applications/Bitcoin-Qt (on Mac) or +bitcoind/bitcoin-qt (on Linux). + +Downgrade warning +------------------ + +Because release 0.10.0 and later makes use of headers-first synchronization and +parallel block download (see further), the block files and databases are not +backwards-compatible with pre-0.10 versions of Bitcoin Core or other software: + +* Blocks will be stored on disk out of order (in the order they are +received, really), which makes it incompatible with some tools or +other programs. Reindexing using earlier versions will also not work +anymore as a result of this. + +* The block index database will now hold headers for which no block is +stored on disk, which earlier versions won't support. + +If you want to be able to downgrade smoothly, make a backup of your entire data +directory. Without this your node will need start syncing (or importing from +bootstrap.dat) anew afterwards. It is possible that the data from a completely +synchronised 0.10 node may be usable in older versions as-is, but this is not +supported and may break as soon as the older version attempts to reindex. + +This does not affect wallet forward or backward compatibility. + +Notable changes +=============== + +Fix buffer overflow in bundled upnp +------------------------------------ + +Bundled miniupnpc was updated to 1.9.20151008. This fixes a buffer overflow in +the XML parser during initial network discovery. + +Details can be found here: http://talosintel.com/reports/TALOS-2015-0035/ + +This applies to the distributed executables only, not when building from source or +using distribution provided packages. + +Additionally, upnp has been disabled by default. This may result in a lower +number of reachable nodes on IPv4, however this prevents future libupnpc +vulnerabilities from being a structural risk to the network +(see https://github.com/bitcoin/bitcoin/pull/6795). + +Test for LowS signatures before relaying +----------------------------------------- + +Make the node require the canonical 'low-s' encoding for ECDSA signatures when +relaying or mining. This removes a nuisance malleability vector. + +Consensus behavior is unchanged. + +If widely deployed this change would eliminate the last remaining known vector +for nuisance malleability on SIGHASH_ALL P2PKH transactions. On the down-side +it will block most transactions made by sufficiently out of date software. + +Unlike the other avenues to change txids on transactions this +one was randomly violated by all deployed bitcoin software prior to +its discovery. So, while other malleability vectors where made +non-standard as soon as they were discovered, this one has remained +permitted. Even BIP62 did not propose applying this rule to +old version transactions, but conforming implementations have become +much more common since BIP62 was initially written. + +Bitcoin Core has produced compatible signatures since a28fb70e in +September 2013, but this didn't make it into a release until 0.9 +in March 2014; Bitcoinj has done so for a similar span of time. +Bitcoinjs and electrum have been more recently updated. + +This does not replace the need for BIP62 or similar, as miners can +still cooperate to break transactions. Nor does it replace the +need for wallet software to handle malleability sanely[1]. This +only eliminates the cheap and irritating DOS attack. + +[1] On the Malleability of Bitcoin Transactions +Marcin Andrychowicz, Stefan Dziembowski, Daniel Malinowski, Łukasz Mazurek +http://fc15.ifca.ai/preproceedings/bitcoin/paper_9.pdf + +Minimum relay fee default increase +----------------------------------- + +The default for the `-minrelaytxfee` setting has been increased from `0.00001` +to `0.00005`. + +This is necessitated by the current transaction flooding, causing +outrageous memory usage on nodes due to the mempool ballooning. This is a +temporary measure, bridging the time until a dynamic method for determining +this fee is merged (which will be in 0.12). + +(see https://github.com/bitcoin/bitcoin/pull/6793, as well as the 0.11.0 +release notes, in which this value was suggested) + +0.10.3 Change log +================= + +Detailed release notes follow. This overview includes changes that affect external +behavior, not code moves, refactors or string updates. + +- #6186 `e4a7d51` Fix two problems in CSubnet parsing +- #6153 `ebd7d8d` Parameter interaction: disable upnp if -proxy set +- #6203 `ecc96f5` Remove P2SH coinbase flag, no longer interesting +- #6226 `181771b` json: fail read_string if string contains trailing garbage +- #6244 `09334e0` configure: Detect (and reject) LibreSSL +- #6276 `0fd8464` Fix getbalance * 0 +- #6274 `be64204` Add option `-alerts` to opt out of alert system +- #6319 `3f55638` doc: update mailing list address +- #6438 `7e66e9c` openssl: avoid config file load/race +- #6439 `255eced` Updated URL location of netinstall for Debian +- #6412 `0739e6e` Test whether created sockets are select()able +- #6694 `f696ea1` [QT] fix thin space word wrap line brake issue +- #6704 `743cc9e` Backport bugfixes to 0.10 +- #6769 `1cea6b0` Test LowS in standardness, removes nuisance malleability vector. +- #6789 `093d7b5` Update miniupnpc to 1.9.20151008 +- #6795 `f2778e0` net: Disable upnp by default +- #6797 `91ef4d9` Do not store more than 200 timedata samples +- #6793 `842c48d` Bump minrelaytxfee default + +Credits +======= + +Thanks to everyone who directly contributed to this release: + +- Adam Weiss +- Alex Morcos +- Casey Rodarmor +- Cory Fields +- fanquake +- Gregory Maxwell +- Jonas Schnelli +- J Ross Nicoll +- Luke Dashjr +- Pavel Vasin +- Pieter Wuille +- randy-waterhouse +- ฿tcDrak +- Tom Harding +- Veres Lajos +- Wladimir J. van der Laan + +And all those who contributed additional code review and/or security research: + +- timothy on IRC for reporting the issue +- Vulnerability in miniupnp discovered by Aleksandar Nikolic of Cisco Talos + +As well as everyone that helped translating on [Transifex](https://www.transifex.com/projects/p/bitcoin/). diff --git a/doc/release-notes/release-notes-0.11.1.md b/doc/release-notes/release-notes-0.11.1.md new file mode 100644 index 0000000000..799205691e --- /dev/null +++ b/doc/release-notes/release-notes-0.11.1.md @@ -0,0 +1,172 @@ +Bitcoin Core version 0.11.1 is now available from: + + <https://bitcoin.org/bin/bitcoin-core-0.11.1/> + +This is a new minor version release, bringing security fixes. It is recommended +to upgrade to this version as soon as possible. + +Please report bugs using the issue tracker at github: + + <https://github.com/bitcoin/bitcoin/issues> + +Upgrading and downgrading +========================= + +How to Upgrade +-------------- + +If you are running an older version, shut it down. Wait until it has completely +shut down (which might take a few minutes for older versions), then run the +installer (on Windows) or just copy over /Applications/Bitcoin-Qt (on Mac) or +bitcoind/bitcoin-qt (on Linux). + +Downgrade warning +------------------ + +Because release 0.10.0 and later makes use of headers-first synchronization and +parallel block download (see further), the block files and databases are not +backwards-compatible with pre-0.10 versions of Bitcoin Core or other software: + +* Blocks will be stored on disk out of order (in the order they are +received, really), which makes it incompatible with some tools or +other programs. Reindexing using earlier versions will also not work +anymore as a result of this. + +* The block index database will now hold headers for which no block is +stored on disk, which earlier versions won't support. + +If you want to be able to downgrade smoothly, make a backup of your entire data +directory. Without this your node will need start syncing (or importing from +bootstrap.dat) anew afterwards. It is possible that the data from a completely +synchronised 0.10 node may be usable in older versions as-is, but this is not +supported and may break as soon as the older version attempts to reindex. + +This does not affect wallet forward or backward compatibility. There are no +known problems when downgrading from 0.11.x to 0.10.x. + +Notable changes +=============== + +Fix buffer overflow in bundled upnp +------------------------------------ + +Bundled miniupnpc was updated to 1.9.20151008. This fixes a buffer overflow in +the XML parser during initial network discovery. + +Details can be found here: http://talosintel.com/reports/TALOS-2015-0035/ + +This applies to the distributed executables only, not when building from source or +using distribution provided packages. + +Additionally, upnp has been disabled by default. This may result in a lower +number of reachable nodes on IPv4, however this prevents future libupnpc +vulnerabilities from being a structural risk to the network +(see https://github.com/bitcoin/bitcoin/pull/6795). + +Test for LowS signatures before relaying +----------------------------------------- + +Make the node require the canonical 'low-s' encoding for ECDSA signatures when +relaying or mining. This removes a nuisance malleability vector. + +Consensus behavior is unchanged. + +If widely deployed this change would eliminate the last remaining known vector +for nuisance malleability on SIGHASH_ALL P2PKH transactions. On the down-side +it will block most transactions made by sufficiently out of date software. + +Unlike the other avenues to change txids on transactions this +one was randomly violated by all deployed bitcoin software prior to +its discovery. So, while other malleability vectors where made +non-standard as soon as they were discovered, this one has remained +permitted. Even BIP62 did not propose applying this rule to +old version transactions, but conforming implementations have become +much more common since BIP62 was initially written. + +Bitcoin Core has produced compatible signatures since a28fb70e in +September 2013, but this didn't make it into a release until 0.9 +in March 2014; Bitcoinj has done so for a similar span of time. +Bitcoinjs and electrum have been more recently updated. + +This does not replace the need for BIP62 or similar, as miners can +still cooperate to break transactions. Nor does it replace the +need for wallet software to handle malleability sanely[1]. This +only eliminates the cheap and irritating DOS attack. + +[1] On the Malleability of Bitcoin Transactions +Marcin Andrychowicz, Stefan Dziembowski, Daniel Malinowski, Łukasz Mazurek +http://fc15.ifca.ai/preproceedings/bitcoin/paper_9.pdf + +Minimum relay fee default increase +----------------------------------- + +The default for the `-minrelaytxfee` setting has been increased from `0.00001` +to `0.00005`. + +This is necessitated by the current transaction flooding, causing +outrageous memory usage on nodes due to the mempool ballooning. This is a +temporary measure, bridging the time until a dynamic method for determining +this fee is merged (which will be in 0.12). + +(see https://github.com/bitcoin/bitcoin/pull/6793, as well as the 0.11 +release notes, in which this value was suggested) + +0.11.1 Change log +================= + +Detailed release notes follow. This overview includes changes that affect +behavior, not code moves, refactors and string updates. For convenience in locating +the code changes and accompanying discussion, both the pull request and +git merge commit are mentioned. + +- #6438 `2531438` openssl: avoid config file load/race +- #6439 `980f820` Updated URL location of netinstall for Debian +- #6384 `8e5a969` qt: Force TLS1.0+ for SSL connections +- #6471 `92401c2` Depends: bump to qt 5.5 +- #6224 `93b606a` Be even stricter in processing unrequested blocks +- #6571 `100ac4e` libbitcoinconsensus: avoid a crash in multi-threaded environments +- #6545 `649f5d9` Do not store more than 200 timedata samples. +- #6694 `834e299` [QT] fix thin space word wrap line break issue +- #6703 `1cd7952` Backport bugfixes to 0.11 +- #6750 `5ed8d0b` Recent rejects backport to v0.11 +- #6769 `71cc9d9` Test LowS in standardness, removes nuisance malleability vector. +- #6789 `b4ad73f` Update miniupnpc to 1.9.20151008 +- #6785 `b4dc33e` Backport to v0.11: In (strCommand == "tx"), return if AlreadyHave() +- #6412 `0095b9a` Test whether created sockets are select()able +- #6795 `4dbcec0` net: Disable upnp by default +- #6793 `e7bcc4a` Bump minrelaytxfee default + +Credits +======= + +Thanks to everyone who directly contributed to this release: + +- Adam Weiss +- Alex Morcos +- Casey Rodarmor +- Cory Fields +- fanquake +- Gregory Maxwell +- Jonas Schnelli +- J Ross Nicoll +- Luke Dashjr +- Pavel Janík +- Pavel Vasin +- Peter Todd +- Pieter Wuille +- randy-waterhouse +- Ross Nicoll +- Suhas Daftuar +- tailsjoin +- ฿tcDrak +- Tom Harding +- Veres Lajos +- Wladimir J. van der Laan + +And those who contributed additional code review and/or security research: + +- timothy on IRC for reporting the issue +- Vulnerability in miniupnp discovered by Aleksandar Nikolic of Cisco Talos + +As well as everyone that helped translating on [Transifex](https://www.transifex.com/projects/p/bitcoin/). + diff --git a/doc/release-process.md b/doc/release-process.md index 1bfdb8fabd..9a2362cb85 100644 --- a/doc/release-process.md +++ b/doc/release-process.md @@ -1,19 +1,21 @@ Release Process ==================== -* update translations (ping wumpus, Diapolo or tcatm on IRC) -* see https://github.com/bitcoin/bitcoin/blob/master/doc/translation_process.md#syncing-with-transifex +* Update translations (ping wumpus, Diapolo or tcatm on IRC) see [translation_process.md](https://github.com/bitcoin/bitcoin/blob/master/doc/translation_process.md#syncing-with-transifex) +* Update [bips.md](bips.md) to account for changes since the last release. * * * -###first time only or for new builders, check out the source in the following directory hierarchy +###First time / New builders +Check out the source code in the following directory hierarchy. cd /path/to/your/toplevel/build git clone https://github.com/bitcoin/gitian.sigs.git + git clone https://github.com/bitcoin/bitcoin-detached-sigs.git git clone https://github.com/devrandom/gitian-builder.git git clone https://github.com/bitcoin/bitcoin.git -###for bitcoin maintainers/release engineers, update (commit) version in sources +###Bitcoin maintainers/release engineers, update (commit) version in sources pushd ./bitcoin contrib/verifysfbinaries/verify.sh @@ -21,72 +23,68 @@ Release Process share/setup.nsi src/clientversion.h (change CLIENT_VERSION_IS_RELEASE to true) -###for bitcoin maintainers/release engineers, tag version in git + # tag version in git git tag -s v(new version, e.g. 0.8.0) -###for bitcoin maintainers/release engineers, write release notes. git shortlog helps a lot, for example: + # write release notes. git shortlog helps a lot, for example: git shortlog --no-merges v(current version, e.g. 0.7.2)..v(new version, e.g. 0.8.0) popd * * * -###update gitian, gitian.sigs, checkout bitcoin version, and perform gitian builds +###Setup and perform Gitian builds + + Setup Gitian descriptors: - To ensure your gitian descriptors are accurate for direct reference for gbuild, below, run the following from a directory containing the bitcoin source: - pushd ./bitcoin - export SIGNER=(your gitian key, ie bluematt, sipa, etc) + export SIGNER=(your Gitian key, ie bluematt, sipa, etc) export VERSION=(new version, e.g. 0.8.0) git checkout v${VERSION} popd - Ensure your gitian.sigs are up-to-date if you wish to gverify your builds against other gitian signatures: + Ensure your gitian.sigs are up-to-date if you wish to gverify your builds against other Gitian signatures. pushd ./gitian.sigs git pull popd - Ensure your gitian-builder sources are up-to-date to take advantage of the new caching features of gitian (`e9741525c` or later is recommended) + Ensure gitian-builder is up-to-date to take advantage of new caching features (`e9741525c` or later is recommended). pushd ./gitian-builder git pull -###fetch and create inputs: (first time, or when dependency versions change) - +###Fetch and create inputs: (first time, or when dependency versions change) + mkdir -p inputs wget -P inputs https://bitcoincore.org/cfields/osslsigncode-Backports-to-1.7.1.patch wget -P inputs http://downloads.sourceforge.net/project/osslsigncode/osslsigncode/osslsigncode-1.7.1.tar.gz - Register and download the Apple SDK: (see OSX Readme for details) - + Register and download the Apple SDK: see [OS X readme](README_osx.txt) for details. + https://developer.apple.com/devcenter/download.action?path=/Developer_Tools/xcode_6.1.1/xcode_6.1.1.dmg - + Using a Mac, create a tarball for the 10.9 SDK and copy it to the inputs directory: - + tar -C /Volumes/Xcode/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/ -czf MacOSX10.9.sdk.tar.gz MacOSX10.9.sdk ###Optional: Seed the Gitian sources cache and offline git repositories -By default, gitian will fetch source files as needed. To cache them ahead of time: +By default, Gitian will fetch source files as needed. To cache them ahead of time: make -C ../bitcoin/depends download SOURCES_PATH=`pwd`/cache/common Only missing files will be fetched, so this is safe to re-run for each build. -Clone the detached-sigs repository: - - popd - git clone https://github.com/bitcoin/bitcoin-detached-sigs.git - pushd ./bitcoin-builder - -NOTE: Offline builds must use the --url flag to ensure gitian fetches only from local URLs. -For example: ./bin/bguild --url bitcoin=/path/to/bitcoin,signature=/path/to/sigs {rest of arguments} -The following gbuild invocations DO NOT DO THIS by default. +NOTE: Offline builds must use the --url flag to ensure Gitian fetches only from local URLs. For example: +``` +./bin/gbuild --url bitcoin=/path/to/bitcoin,signature=/path/to/sigs {rest of arguments} +``` +The gbuild invocations below <b>DO NOT DO THIS</b> by default. ###Build (and optionally verify) Bitcoin Core for Linux, Windows, and OS X: - + ./bin/gbuild --commit bitcoin=v${VERSION} ../bitcoin/contrib/gitian-descriptors/gitian-linux.yml ./bin/gsign --signer $SIGNER --release ${VERSION}-linux --destination ../gitian.sigs/ ../bitcoin/contrib/gitian-descriptors/gitian-linux.yml ./bin/gverify -v -d ../gitian.sigs/ -r ${VERSION}-linux ../bitcoin/contrib/gitian-descriptors/gitian-linux.yml @@ -110,8 +108,8 @@ The following gbuild invocations DO NOT DO THIS by default. 1. source tarball (bitcoin-${VERSION}.tar.gz) 2. linux 32-bit and 64-bit dist tarballs (bitcoin-${VERSION}-linux[32|64].tar.gz) 3. windows 32-bit and 64-bit unsigned installers and dist zips (bitcoin-${VERSION}-win[32|64]-setup-unsigned.exe, bitcoin-${VERSION}-win[32|64].zip) - 4. OSX unsigned installer and dist tarball (bitcoin-${VERSION}-osx-unsigned.dmg, bitcoin-${VERSION}-osx64.tar.gz) - 5. Gitian signatures (in gitian.sigs/${VERSION}-<linux|{win,osx}-unsigned>/(your gitian key)/ + 4. OS X unsigned installer and dist tarball (bitcoin-${VERSION}-osx-unsigned.dmg, bitcoin-${VERSION}-osx64.tar.gz) + 5. Gitian signatures (in gitian.sigs/${VERSION}-<linux|{win,osx}-unsigned>/(your Gitian key)/ ###Next steps: @@ -125,11 +123,12 @@ Commit your signature to gitian.sigs: git push # Assuming you can push to the gitian.sigs tree popd - Wait for Windows/OSX detached signatures: - Once the Windows/OSX builds each have 3 matching signatures, they will be signed with their respective release keys. - Detached signatures will then be committed to the bitcoin-detached-sigs repository, which can be combined with the unsigned apps to create signed binaries. + Wait for Windows/OS X detached signatures: + + Once the Windows/OS X builds each have 3 matching signatures, they will be signed with their respective release keys. + Detached signatures will then be committed to the [bitcoin-detached-sigs](https://github.com/bitcoin/bitcoin-detached-sigs) repository, which can be combined with the unsigned apps to create signed binaries. - Create (and optionally verify) the signed OSX binary: + Create (and optionally verify) the signed OS X binary: pushd ./gitian-builder ./bin/gbuild -i --commit signature=v${VERSION} ../bitcoin/contrib/gitian-descriptors/gitian-osx-signer.yml @@ -148,7 +147,7 @@ Commit your signature to gitian.sigs: mv build/out/bitcoin-*win32-setup.exe ../bitcoin-${VERSION}-win32-setup.exe popd -Commit your signature for the signed OSX/Windows binaries: +Commit your signature for the signed OS X/Windows binaries: pushd gitian.sigs git add ${VERSION}-osx-signed/${SIGNER} @@ -176,14 +175,14 @@ Note: check that SHA256SUMS itself doesn't end up in SHA256SUMS, which is a spur - Update bitcoin.org version - First, check to see if the Bitcoin.org maintainers have prepared a - release: https://github.com/bitcoin/bitcoin.org/labels/Releases + release: https://github.com/bitcoin-dot-org/bitcoin.org/labels/Releases - If they have, it will have previously failed their Travis CI checks because the final release files weren't uploaded. Trigger a Travis CI rebuild---if it passes, merge. - If they have not prepared a release, follow the Bitcoin.org release - instructions: https://github.com/bitcoin/bitcoin.org#release-notes + instructions: https://github.com/bitcoin-dot-org/bitcoin.org#release-notes - After the pull request is merged, the website will automatically show the newest version within 15 minutes, as well as update the OS download links. Ping @saivann/@harding (saivann/harding on Freenode) in case anything goes wrong diff --git a/doc/shared-libraries.md b/doc/shared-libraries.md index f1448f7258..f4ff53d6e9 100644 --- a/doc/shared-libraries.md +++ b/doc/shared-libraries.md @@ -41,3 +41,4 @@ The interface is defined in the C header `bitcoinconsensus.h` located in `src/s - [NBitcoin](https://github.com/NicolasDorier/NBitcoin/blob/master/NBitcoin/Script.cs#L814) (.NET Bindings) - [node-libbitcoinconsensus](https://github.com/bitpay/node-libbitcoinconsensus) (Node.js Bindings) - [java-libbitcoinconsensus](https://github.com/dexX7/java-libbitcoinconsensus) (Java Bindings) +- [bitcoinconsensus-php](https://github.com/Bit-Wasp/bitcoinconsensus-php) (PHP Bindings) diff --git a/doc/tor.md b/doc/tor.md index f8b94d19d1..594897f896 100644 --- a/doc/tor.md +++ b/doc/tor.md @@ -15,15 +15,15 @@ outgoing connections be anonymized, but more is possible. -proxy=ip:port Set the proxy server. If SOCKS5 is selected (default), this proxy server will be used to try to reach .onion addresses as well. - + -onion=ip:port Set the proxy server to use for tor hidden services. You do not need to set this if it's the same as -proxy. You can use -noonion to explicitly disable access to hidden service. - + -listen When using -proxy, listening is disabled by default. If you want to run a hidden service (see next section), you'll need to enable it explicitly. - + -connect=X When behind a Tor proxy, you can specify .onion addresses instead -addnode=X of IP addresses or hostnames in these parameters. It requires -seednode=X SOCKS5. In Tor mode, such addresses can also be exchanged with @@ -55,10 +55,10 @@ your bitcoind's P2P listen port (8333 by default). preference for your node to advertize itself with, for connections coming from unroutable addresses (such as 127.0.0.1, where the Tor proxy typically runs). - + -listen You'll need to enable listening for incoming connections, as this is off by default behind a proxy. - + -discover When -externalip is specified, no attempt is made to discover local IPv4 or IPv6 addresses. If you want to run a dual stack, reachable from both Tor and IPv4 (or IPv6), you'll need to either pass your @@ -87,4 +87,3 @@ If you only want to use Tor to reach onion addresses, but not use it as a proxy for normal IPv4/IPv6 communication, use: ./bitcoin -onion=127.0.0.1:9050 -externalip=57qr3yd1nyntf5k.onion -discover - diff --git a/doc/translation_process.md b/doc/translation_process.md index b06975e1d8..6389c5aced 100644 --- a/doc/translation_process.md +++ b/doc/translation_process.md @@ -1,7 +1,7 @@ Translations ============ -The Bitcoin-Core project has been designed to support multiple localisations. This makes adding new phrases, and completely new languages easily achievable. For managing all application translations, Bitcoin-Core makes use of the Transifex online translation management tool. +The Bitcoin-Core project has been designed to support multiple localisations. This makes adding new phrases, and completely new languages easily achievable. For managing all application translations, Bitcoin-Core makes use of the Transifex online translation management tool. ### Helping to translate (using Transifex) Transifex is setup to monitor the Github repo for updates, and when code containing new translations is found, Transifex will process any changes. It may take several hours after a pull-request has been merged, to appear in the Transifex web interface. diff --git a/doc/translation_strings_policy.md b/doc/translation_strings_policy.md index cf72a55b20..936a6112c6 100644 --- a/doc/translation_strings_policy.md +++ b/doc/translation_strings_policy.md @@ -1,7 +1,7 @@ Translation Strings Policy =========================== -This document provides guidelines for internationalization of the Bitcoin Core software. +This document provides guidelines for internationalization of the Bitcoin Core software. How to translate? ------------------ @@ -107,4 +107,3 @@ The second example reduces the number of pluralized words that translators have During a string freeze (often before a major release), no translation strings are to be added, modified or removed. This can be checked by executing `make translate` in the `src` directory, then verifying that `bitcoin_en.ts` remains unchanged. - diff --git a/doc/zmq.md b/doc/zmq.md index 484b005cf4..902d1124c7 100644 --- a/doc/zmq.md +++ b/doc/zmq.md @@ -2,7 +2,7 @@ [ZeroMQ](http://zeromq.org/) is a lightweight wrapper around TCP connections, inter-process communication, and shared-memory, -providing various message-oriented semantics such as publish/subcribe, +providing various message-oriented semantics such as publish/subscribe, request/reply, and push/pull. The Bitcoin Core daemon can be configured to act as a trusted "border @@ -78,7 +78,7 @@ bytes). These options can also be provided in bitcoin.conf. ZeroMQ endpoint specifiers for TCP (and others) are documented in the -[ZeroMQ API](http://api.zeromq.org). +[ZeroMQ API](http://api.zeromq.org/4-0:_start). Client side, then, the ZeroMQ subscriber socket must have the ZMQ_SUBSCRIBE option set to one or either of these prefixes (for diff --git a/qa/pull-tester/rpc-tests.py b/qa/pull-tester/rpc-tests.py index 58098bdec5..8a431d718d 100755 --- a/qa/pull-tester/rpc-tests.py +++ b/qa/pull-tester/rpc-tests.py @@ -38,7 +38,7 @@ for i in range(1,len(sys.argv)): buildDir = BUILDDIR os.environ["BITCOIND"] = buildDir + '/src/bitcoind' + EXEEXT os.environ["BITCOINCLI"] = buildDir + '/src/bitcoin-cli' + EXEEXT - + #Disable Windows tests by default if EXEEXT == ".exe" and "-win" not in opts: print "Win tests currently disabled. Use -win option to enable" @@ -67,6 +67,7 @@ testScripts = [ 'reindex.py', 'decodescript.py', 'p2p-fullblocktest.py', + 'blockchain.py', ] testScriptsExt = [ 'bipdersig-p2p.py', @@ -80,12 +81,11 @@ testScriptsExt = [ 'invalidateblock.py', 'keypool.py', 'receivedby.py', - 'rpcbind_test.py', -# 'script_test.py', +# 'rpcbind_test.py', #temporary, bug in libevent, see #6655 +# 'script_test.py', #used for manual comparison of 2 binaries 'smartfees.py', 'maxblocksinflight.py', 'invalidblockrequest.py', -# 'forknotify.py', 'p2p-acceptblock.py', 'mempool_packages.py', ] @@ -98,10 +98,10 @@ if(ENABLE_WALLET == 1 and ENABLE_UTILS == 1 and ENABLE_BITCOIND == 1): rpcTestDir = buildDir + '/qa/rpc-tests/' #Run Tests for i in range(len(testScripts)): - if (len(opts) == 0 or (len(opts) == 1 and "-win" in opts ) or '-extended' in opts + if (len(opts) == 0 or (len(opts) == 1 and "-win" in opts ) or '-extended' in opts or testScripts[i] in opts or re.sub(".py$", "", testScripts[i]) in opts ): - print "Running testscript " + testScripts[i] + "..." - subprocess.call(rpcTestDir + testScripts[i] + " --srcdir " + buildDir + '/src ' + passOn,shell=True) + print "Running testscript " + testScripts[i] + "..." + subprocess.check_call(rpcTestDir + testScripts[i] + " --srcdir " + buildDir + '/src ' + passOn,shell=True) #exit if help is called so we print just one set of instructions p = re.compile(" -h| --help") if p.match(passOn): @@ -109,9 +109,9 @@ if(ENABLE_WALLET == 1 and ENABLE_UTILS == 1 and ENABLE_BITCOIND == 1): #Run Extended Tests for i in range(len(testScriptsExt)): - if ('-extended' in opts or testScriptsExt[i] in opts + if ('-extended' in opts or testScriptsExt[i] in opts or re.sub(".py$", "", testScriptsExt[i]) in opts): - print "Running 2nd level testscript " + testScriptsExt[i] + "..." - subprocess.call(rpcTestDir + testScriptsExt[i] + " --srcdir " + buildDir + '/src ' + passOn,shell=True) + print "Running 2nd level testscript " + testScriptsExt[i] + "..." + subprocess.check_call(rpcTestDir + testScriptsExt[i] + " --srcdir " + buildDir + '/src ' + passOn,shell=True) else: print "No rpc tests to run. Wallet, utils, and bitcoind must all be enabled" diff --git a/qa/rpc-tests/README.md b/qa/rpc-tests/README.md index 3391ee03ae..d2db00362f 100644 --- a/qa/rpc-tests/README.md +++ b/qa/rpc-tests/README.md @@ -37,11 +37,11 @@ Helper functions for creating blocks and transactions. Notes ===== -You can run any single test by calling qa/pull-tester/rpc-tests.py <testname> +You can run any single test by calling `qa/pull-tester/rpc-tests.py <testname>`. Or you can run any combination of tests by calling `qa/pull-tester/rpc-tests.py <testname1> <testname2> <testname3> ...` -Run the regression test suite with `qa/pull-tester/rpc-tests.py' +Run the regression test suite with `qa/pull-tester/rpc-tests.py` Run all possible tests with `qa/pull-tester/rpc-tests.py -extended` diff --git a/qa/rpc-tests/blockchain.py b/qa/rpc-tests/blockchain.py new file mode 100755 index 0000000000..a5c98b777e --- /dev/null +++ b/qa/rpc-tests/blockchain.py @@ -0,0 +1,52 @@ +#!/usr/bin/env python2 +# Copyright (c) 2014 The Bitcoin Core developers +# Distributed under the MIT software license, see the accompanying +# file COPYING or http://www.opensource.org/licenses/mit-license.php. + +# +# Test RPC calls related to blockchain state. +# + +import decimal + +from test_framework.test_framework import BitcoinTestFramework +from test_framework.util import ( + initialize_chain, + assert_equal, + start_nodes, + connect_nodes_bi, +) + +class BlockchainTest(BitcoinTestFramework): + """ + Test blockchain-related RPC calls: + + - gettxoutsetinfo + + """ + + def setup_chain(self): + print("Initializing test directory " + self.options.tmpdir) + initialize_chain(self.options.tmpdir) + + def setup_network(self, split=False): + self.nodes = start_nodes(2, self.options.tmpdir) + connect_nodes_bi(self.nodes, 0, 1) + self.is_network_split = False + self.sync_all() + + def run_test(self): + node = self.nodes[0] + res = node.gettxoutsetinfo() + + assert_equal(res[u'total_amount'], decimal.Decimal('8725.00000000')) + assert_equal(res[u'transactions'], 200) + assert_equal(res[u'height'], 200) + assert_equal(res[u'txouts'], 200) + assert_equal(res[u'bytes_serialized'], 13000), + assert_equal(len(res[u'bestblock']), 64) + assert_equal(len(res[u'hash_serialized']), 64) + + +if __name__ == '__main__': + BlockchainTest().main() diff --git a/qa/rpc-tests/fundrawtransaction.py b/qa/rpc-tests/fundrawtransaction.py index fc29789218..93d13faa06 100755 --- a/qa/rpc-tests/fundrawtransaction.py +++ b/qa/rpc-tests/fundrawtransaction.py @@ -28,7 +28,15 @@ class RawTransactionsTest(BitcoinTestFramework): def run_test(self): print "Mining blocks..." - feeTolerance = Decimal(0.00000002) #if the fee's positive delta is higher than this value tests will fail, neg. delta always fail the tests + + min_relay_tx_fee = self.nodes[0].getnetworkinfo()['relayfee'] + # if the fee's positive delta is higher than this value tests will fail, + # neg. delta always fail the tests. + # The size of the signature of every input may be at most 2 bytes larger + # than a minimum sized signature. + + # = 2 bytes * minRelayTxFeePerByte + feeTolerance = 2 * min_relay_tx_fee/1000 self.nodes[2].generate(1) self.sync_all() diff --git a/qa/rpc-tests/pruning.py b/qa/rpc-tests/pruning.py index 2824c51ce7..21f8d69382 100755 --- a/qa/rpc-tests/pruning.py +++ b/qa/rpc-tests/pruning.py @@ -61,6 +61,9 @@ class PruneTest(BitcoinTestFramework): self.address[0] = self.nodes[0].getnewaddress() self.address[1] = self.nodes[1].getnewaddress() + # Determine default relay fee + self.relayfee = self.nodes[0].getnetworkinfo()["relayfee"] + connect_nodes(self.nodes[0], 1) connect_nodes(self.nodes[1], 2) connect_nodes(self.nodes[2], 0) @@ -239,7 +242,7 @@ class PruneTest(BitcoinTestFramework): outputs = {} t = self.utxo.pop() inputs.append({ "txid" : t["txid"], "vout" : t["vout"]}) - remchange = t["amount"] - Decimal("0.001000") + remchange = t["amount"] - 100*self.relayfee # Fee must be above min relay rate for 66kb tx outputs[address]=remchange # Create a basic transaction that will send change back to ourself after account for a fee # And then insert the 128 generated transaction outs in the middle rawtx[92] is where the # diff --git a/share/qt/make_windows_icon.sh b/share/qt/make_windows_icon.sh deleted file mode 100755 index bf607b1c62..0000000000 --- a/share/qt/make_windows_icon.sh +++ /dev/null @@ -1,9 +0,0 @@ -#!/bin/bash -# create multiresolution windows icon -ICON_SRC=../../src/qt/res/icons/bitcoin.png -ICON_DST=../../src/qt/res/icons/bitcoin.ico -convert ${ICON_SRC} -resize 16x16 bitcoin-16.png -convert ${ICON_SRC} -resize 32x32 bitcoin-32.png -convert ${ICON_SRC} -resize 48x48 bitcoin-48.png -convert bitcoin-16.png bitcoin-32.png bitcoin-48.png ${ICON_DST} - diff --git a/src/Makefile.am b/src/Makefile.am index 0654ff4227..0a16a863eb 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -31,13 +31,13 @@ LIBBITCOIN_UTIL=libbitcoin_util.a LIBBITCOIN_CRYPTO=crypto/libbitcoin_crypto.a LIBBITCOINQT=qt/libbitcoinqt.a LIBSECP256K1=secp256k1/libsecp256k1.la -LIBUNIVALUE=univalue/lib/libunivalue.la +LIBUNIVALUE=univalue/libunivalue.la $(LIBSECP256K1): $(wildcard secp256k1/src/*) $(wildcard secp256k1/include/*) $(AM_V_at)$(MAKE) $(AM_MAKEFLAGS) -C $(@D) $(@F) -$(LIBUNIVALUE): $(wildcard univalue/lib/*) - $(AM_V_at)$(MAKE) $(AM_MAKEFLAGS) -C univalue/ +$(LIBUNIVALUE): $(wildcard univalue/lib/*) $(wildcard univalue/include/*) + $(AM_V_at)$(MAKE) $(AM_MAKEFLAGS) -C $(@D) $(@F) # Make is not made aware of per-object dependencies to avoid limiting building parallelization # But to build the less dependent modules first, we manually select their order here: @@ -421,6 +421,7 @@ EXTRA_DIST = leveldb clean-local: -$(MAKE) -C leveldb clean -$(MAKE) -C secp256k1 clean + -$(MAKE) -C univalue clean rm -f leveldb/*/*.gcno leveldb/helpers/memenv/*.gcno -rm -f config.h diff --git a/src/bitcoin-cli.cpp b/src/bitcoin-cli.cpp index e0fe6aa5bf..364baf9d13 100644 --- a/src/bitcoin-cli.cpp +++ b/src/bitcoin-cli.cpp @@ -31,9 +31,7 @@ std::string HelpMessageCli() strUsage += HelpMessageOpt("-?", _("This help message")); strUsage += HelpMessageOpt("-conf=<file>", strprintf(_("Specify configuration file (default: %s)"), "bitcoin.conf")); strUsage += HelpMessageOpt("-datadir=<dir>", _("Specify data directory")); - strUsage += HelpMessageOpt("-testnet", _("Use the test network")); - strUsage += HelpMessageOpt("-regtest", _("Enter regression test mode, which uses a special chain in which blocks can be " - "solved instantly. This is intended for regression testing tools and app development.")); + AppendParamsHelpMessages(strUsage); strUsage += HelpMessageOpt("-rpcconnect=<ip>", strprintf(_("Send commands to node running on <ip> (default: %s)"), "127.0.0.1")); strUsage += HelpMessageOpt("-rpcport=<port>", strprintf(_("Connect to JSON-RPC on <port> (default: %u or testnet: %u)"), 8332, 18332)); strUsage += HelpMessageOpt("-rpcwait", _("Wait for RPC server to start")); @@ -94,8 +92,10 @@ static bool AppInitRPC(int argc, char* argv[]) return false; } // Check for -testnet or -regtest parameter (BaseParams() calls are only valid after this clause) - if (!SelectBaseParamsFromCommandLine()) { - fprintf(stderr, "Error: Invalid combination of -regtest and -testnet.\n"); + try { + SelectBaseParams(ChainNameFromCommandLine()); + } catch(std::exception &e) { + fprintf(stderr, "Error: %s\n", e.what()); return false; } if (GetBoolArg("-rpcssl", false)) diff --git a/src/bitcoin-tx.cpp b/src/bitcoin-tx.cpp index f7518fab5d..5630d20cc5 100644 --- a/src/bitcoin-tx.cpp +++ b/src/bitcoin-tx.cpp @@ -35,8 +35,10 @@ static bool AppInitRawTx(int argc, char* argv[]) ParseParameters(argc, argv); // Check for -testnet or -regtest parameter (Params() calls are only valid after this clause) - if (!SelectParamsFromCommandLine()) { - fprintf(stderr, "Error: Invalid combination of -regtest and -testnet.\n"); + try { + SelectParams(ChainNameFromCommandLine()); + } catch(std::exception &e) { + fprintf(stderr, "Error: %s\n", e.what()); return false; } @@ -58,8 +60,7 @@ static bool AppInitRawTx(int argc, char* argv[]) strUsage += HelpMessageOpt("-create", _("Create new, empty TX.")); strUsage += HelpMessageOpt("-json", _("Select JSON output")); strUsage += HelpMessageOpt("-txid", _("Output only the hex-encoded transaction id of the resultant transaction.")); - strUsage += HelpMessageOpt("-regtest", _("Enter regression test mode, which uses a special chain in which blocks can be solved instantly.")); - strUsage += HelpMessageOpt("-testnet", _("Use the test network")); + AppendParamsHelpMessages(strUsage); fprintf(stdout, "%s", strUsage.c_str()); diff --git a/src/bitcoind.cpp b/src/bitcoind.cpp index b512f74c22..284a42b326 100644 --- a/src/bitcoind.cpp +++ b/src/bitcoind.cpp @@ -107,8 +107,10 @@ bool AppInit(int argc, char* argv[]) return false; } // Check for -testnet or -regtest parameter (Params() calls are only valid after this clause) - if (!SelectParamsFromCommandLine()) { - fprintf(stderr, "Error: Invalid combination of -regtest and -testnet.\n"); + try { + SelectParams(ChainNameFromCommandLine()); + } catch(std::exception &e) { + fprintf(stderr, "Error: %s\n", e.what()); return false; } diff --git a/src/chainparams.cpp b/src/chainparams.cpp index 430b75683b..dd26c3b31a 100644 --- a/src/chainparams.cpp +++ b/src/chainparams.cpp @@ -5,6 +5,7 @@ #include "chainparams.h" +#include "tinyformat.h" #include "util.h" #include "utilstrencodings.h" @@ -76,6 +77,7 @@ public: consensus.nPowTargetTimespan = 14 * 24 * 60 * 60; // two weeks consensus.nPowTargetSpacing = 10 * 60; consensus.fPowAllowMinDifficultyBlocks = false; + consensus.fPowNoRetargeting = false; /** * The message start string is designed to be unlikely to occur in normal data. * The characters are rarely used upper ASCII, not valid as UTF-8, and produce @@ -155,6 +157,7 @@ public: consensus.nPowTargetTimespan = 14 * 24 * 60 * 60; // two weeks consensus.nPowTargetSpacing = 10 * 60; consensus.fPowAllowMinDifficultyBlocks = true; + consensus.fPowNoRetargeting = false; pchMessageStart[0] = 0x0b; pchMessageStart[1] = 0x11; pchMessageStart[2] = 0x09; @@ -217,6 +220,7 @@ public: consensus.nPowTargetTimespan = 14 * 24 * 60 * 60; // two weeks consensus.nPowTargetSpacing = 10 * 60; consensus.fPowAllowMinDifficultyBlocks = true; + consensus.fPowNoRetargeting = true; pchMessageStart[0] = 0xfa; pchMessageStart[1] = 0xbf; @@ -263,31 +267,20 @@ const CChainParams &Params() { return *pCurrentParams; } -CChainParams &Params(CBaseChainParams::Network network) { - switch (network) { - case CBaseChainParams::MAIN: +CChainParams& Params(const std::string& chain) +{ + if (chain == CBaseChainParams::MAIN) return mainParams; - case CBaseChainParams::TESTNET: + else if (chain == CBaseChainParams::TESTNET) return testNetParams; - case CBaseChainParams::REGTEST: + else if (chain == CBaseChainParams::REGTEST) return regTestParams; - default: - assert(false && "Unimplemented network"); - return mainParams; - } + else + throw std::runtime_error(strprintf("%s: Unknown chain %s.", __func__, chain)); } -void SelectParams(CBaseChainParams::Network network) { +void SelectParams(const std::string& network) +{ SelectBaseParams(network); pCurrentParams = &Params(network); } - -bool SelectParamsFromCommandLine() -{ - CBaseChainParams::Network network = NetworkIdFromCommandLine(); - if (network == CBaseChainParams::MAX_NETWORK_TYPES) - return false; - - SelectParams(network); - return true; -} diff --git a/src/chainparams.h b/src/chainparams.h index 342bccb12f..cb061d596e 100644 --- a/src/chainparams.h +++ b/src/chainparams.h @@ -105,16 +105,15 @@ protected: */ const CChainParams &Params(); -/** Return parameters for the given network. */ -CChainParams &Params(CBaseChainParams::Network network); - -/** Sets the params returned by Params() to those for the given network. */ -void SelectParams(CBaseChainParams::Network network); +/** + * @returns CChainParams for the given BIP70 chain name. + */ +CChainParams& Params(const std::string& chain); /** - * Looks for -regtest or -testnet and then calls SelectParams as appropriate. - * Returns false if an invalid combination is given. + * Sets the params returned by Params() to those for the given BIP70 chain name. + * @throws std::runtime_error when the chain is not supported. */ -bool SelectParamsFromCommandLine(); +void SelectParams(const std::string& chain); #endif // BITCOIN_CHAINPARAMS_H diff --git a/src/chainparamsbase.cpp b/src/chainparamsbase.cpp index 9c87bf2154..db2dc751f5 100644 --- a/src/chainparamsbase.cpp +++ b/src/chainparamsbase.cpp @@ -5,10 +5,25 @@ #include "chainparamsbase.h" +#include "tinyformat.h" #include "util.h" #include <assert.h> +const std::string CBaseChainParams::MAIN = "main"; +const std::string CBaseChainParams::TESTNET = "test"; +const std::string CBaseChainParams::REGTEST = "regtest"; + +void AppendParamsHelpMessages(std::string& strUsage, bool debugHelp) +{ + strUsage += HelpMessageGroup(_("Chain selection options:")); + strUsage += HelpMessageOpt("-testnet", _("Use the test chain")); + if (debugHelp) { + strUsage += HelpMessageOpt("-regtest", "Enter regression test mode, which uses a special chain in which blocks can be solved instantly. " + "This is intended for regression testing tools and app development."); + } +} + /** * Main network */ @@ -71,31 +86,25 @@ const CBaseChainParams& BaseParams() return *pCurrentBaseParams; } -void SelectBaseParams(CBaseChainParams::Network network) +void SelectBaseParams(const std::string& chain) { - switch (network) { - case CBaseChainParams::MAIN: + if (chain == CBaseChainParams::MAIN) pCurrentBaseParams = &mainParams; - break; - case CBaseChainParams::TESTNET: + else if (chain == CBaseChainParams::TESTNET) pCurrentBaseParams = &testNetParams; - break; - case CBaseChainParams::REGTEST: + else if (chain == CBaseChainParams::REGTEST) pCurrentBaseParams = ®TestParams; - break; - default: - assert(false && "Unimplemented network"); - return; - } + else + throw std::runtime_error(strprintf("%s: Unknown chain %s.", __func__, chain)); } -CBaseChainParams::Network NetworkIdFromCommandLine() +std::string ChainNameFromCommandLine() { bool fRegTest = GetBoolArg("-regtest", false); bool fTestNet = GetBoolArg("-testnet", false); if (fTestNet && fRegTest) - return CBaseChainParams::MAX_NETWORK_TYPES; + throw std::runtime_error("Invalid combination of -regtest and -testnet."); if (fRegTest) return CBaseChainParams::REGTEST; if (fTestNet) @@ -103,16 +112,6 @@ CBaseChainParams::Network NetworkIdFromCommandLine() return CBaseChainParams::MAIN; } -bool SelectBaseParamsFromCommandLine() -{ - CBaseChainParams::Network network = NetworkIdFromCommandLine(); - if (network == CBaseChainParams::MAX_NETWORK_TYPES) - return false; - - SelectBaseParams(network); - return true; -} - bool AreBaseParamsConfigured() { return pCurrentBaseParams != NULL; diff --git a/src/chainparamsbase.h b/src/chainparamsbase.h index 4369d0aef7..095c4cbdcb 100644 --- a/src/chainparamsbase.h +++ b/src/chainparamsbase.h @@ -15,13 +15,10 @@ class CBaseChainParams { public: - enum Network { - MAIN, - TESTNET, - REGTEST, - - MAX_NETWORK_TYPES - }; + /** BIP70 chain name strings (main, test or regtest) */ + static const std::string MAIN; + static const std::string TESTNET; + static const std::string REGTEST; const std::string& DataDir() const { return strDataDir; } int RPCPort() const { return nRPCPort; } @@ -34,25 +31,25 @@ protected: }; /** + * Append the help messages for the chainparams options to the + * parameter string. + */ +void AppendParamsHelpMessages(std::string& strUsage, bool debugHelp=true); + +/** * Return the currently selected parameters. This won't change after app * startup, except for unit tests. */ const CBaseChainParams& BaseParams(); /** Sets the params returned by Params() to those for the given network. */ -void SelectBaseParams(CBaseChainParams::Network network); - -/** - * Looks for -regtest or -testnet and returns the appropriate Network ID. - * Returns MAX_NETWORK_TYPES if an invalid combination is given. - */ -CBaseChainParams::Network NetworkIdFromCommandLine(); +void SelectBaseParams(const std::string& chain); /** - * Calls NetworkIdFromCommandLine() and then calls SelectParams as appropriate. - * Returns false if an invalid combination is given. + * Looks for -regtest, -testnet and returns the appropriate BIP70 chain name. + * @return CBaseChainParams::MAX_NETWORK_TYPES if an invalid combination is given. CBaseChainParams::MAIN by default. */ -bool SelectBaseParamsFromCommandLine(); +std::string ChainNameFromCommandLine(); /** * Return true if SelectBaseParamsFromCommandLine() has been called to select diff --git a/src/consensus/params.h b/src/consensus/params.h index c480a1cce1..efbbbed352 100644 --- a/src/consensus/params.h +++ b/src/consensus/params.h @@ -22,6 +22,7 @@ struct Params { /** Proof of work parameters */ uint256 powLimit; bool fPowAllowMinDifficultyBlocks; + bool fPowNoRetargeting; int64_t nPowTargetSpacing; int64_t nPowTargetTimespan; int64_t DifficultyAdjustmentInterval() const { return nPowTargetTimespan / nPowTargetSpacing; } diff --git a/src/init.cpp b/src/init.cpp index a079dce5bc..75c76e3258 100644 --- a/src/init.cpp +++ b/src/init.cpp @@ -439,11 +439,10 @@ std::string HelpMessage(HelpMessageMode mode) { strUsage += HelpMessageOpt("-printpriority", strprintf("Log transaction priority and fee per kB when mining blocks (default: %u)", 0)); strUsage += HelpMessageOpt("-privdb", strprintf("Sets the DB_PRIVATE flag in the wallet db environment (default: %u)", 1)); - strUsage += HelpMessageOpt("-regtest", "Enter regression test mode, which uses a special chain in which blocks can be solved instantly. " - "This is intended for regression testing tools and app development."); } strUsage += HelpMessageOpt("-shrinkdebugfile", _("Shrink debug.log file on client startup (default: 1 when no -debug)")); - strUsage += HelpMessageOpt("-testnet", _("Use the test network")); + + AppendParamsHelpMessages(strUsage, showDebug); strUsage += HelpMessageGroup(_("Node relay options:")); if (showDebug) diff --git a/src/leveldbwrapper.cpp b/src/leveldbwrapper.cpp index ce96b5c8aa..32c9345be5 100644 --- a/src/leveldbwrapper.cpp +++ b/src/leveldbwrapper.cpp @@ -131,7 +131,7 @@ std::vector<unsigned char> CLevelDBWrapper::CreateObfuscateKey() const bool CLevelDBWrapper::IsEmpty() { - boost::scoped_ptr<leveldb::Iterator> it(NewIterator()); + boost::scoped_ptr<CLevelDBIterator> it(NewIterator()); it->SeekToFirst(); return !(it->Valid()); } @@ -145,3 +145,10 @@ std::string CLevelDBWrapper::GetObfuscateKeyHex() const { return HexStr(obfuscate_key); } + +CLevelDBIterator::~CLevelDBIterator() { delete piter; } +bool CLevelDBIterator::Valid() { return piter->Valid(); } +void CLevelDBIterator::SeekToFirst() { piter->SeekToFirst(); } +void CLevelDBIterator::SeekToLast() { piter->SeekToLast(); } +void CLevelDBIterator::Next() { piter->Next(); } +void CLevelDBIterator::Prev() { piter->Prev(); } diff --git a/src/leveldbwrapper.h b/src/leveldbwrapper.h index f5c463830c..60101e18cc 100644 --- a/src/leveldbwrapper.h +++ b/src/leveldbwrapper.h @@ -32,13 +32,13 @@ class CLevelDBBatch private: leveldb::WriteBatch batch; - const std::vector<unsigned char> obfuscate_key; + const std::vector<unsigned char> *obfuscate_key; public: /** * @param[in] obfuscate_key If passed, XOR data with this key. */ - CLevelDBBatch(const std::vector<unsigned char>& obfuscate_key) : obfuscate_key(obfuscate_key) { }; + CLevelDBBatch(const std::vector<unsigned char> *obfuscate_key) : obfuscate_key(obfuscate_key) { }; template <typename K, typename V> void Write(const K& key, const V& value) @@ -51,7 +51,7 @@ public: CDataStream ssValue(SER_DISK, CLIENT_VERSION); ssValue.reserve(ssValue.GetSerializeSize(value)); ssValue << value; - ssValue.Xor(obfuscate_key); + ssValue.Xor(*obfuscate_key); leveldb::Slice slValue(&ssValue[0], ssValue.size()); batch.Put(slKey, slValue); @@ -68,7 +68,72 @@ public: batch.Delete(slKey); } }; + +class CLevelDBIterator +{ +private: + leveldb::Iterator *piter; + const std::vector<unsigned char> *obfuscate_key; + +public: + + /** + * @param[in] piterIn The original leveldb iterator. + * @param[in] obfuscate_key If passed, XOR data with this key. + */ + CLevelDBIterator(leveldb::Iterator *piterIn, const std::vector<unsigned char>* obfuscate_key) : + piter(piterIn), obfuscate_key(obfuscate_key) { }; + ~CLevelDBIterator(); + + bool Valid(); + void SeekToFirst(); + void SeekToLast(); + + template<typename K> void Seek(const K& key) { + CDataStream ssKey(SER_DISK, CLIENT_VERSION); + ssKey.reserve(ssKey.GetSerializeSize(key)); + ssKey << key; + leveldb::Slice slKey(&ssKey[0], ssKey.size()); + piter->Seek(slKey); + } + + void Next(); + void Prev(); + + template<typename K> bool GetKey(K& key) { + leveldb::Slice slKey = piter->key(); + try { + CDataStream ssKey(slKey.data(), slKey.data() + slKey.size(), SER_DISK, CLIENT_VERSION); + ssKey >> key; + } catch(std::exception &e) { + return false; + } + return true; + } + + unsigned int GetKeySize() { + return piter->key().size(); + } + + template<typename V> bool GetValue(V& value) { + leveldb::Slice slValue = piter->value(); + try { + CDataStream ssValue(slValue.data(), slValue.data() + slValue.size(), SER_DISK, CLIENT_VERSION); + ssValue.Xor(*obfuscate_key); + ssValue >> value; + } catch(std::exception &e) { + return false; + } + return true; + } + + unsigned int GetValueSize() { + return piter->value().size(); + } + +}; + class CLevelDBWrapper { private: @@ -145,7 +210,7 @@ public: template <typename K, typename V> bool Write(const K& key, const V& value, bool fSync = false) throw(leveldb_error) { - CLevelDBBatch batch(obfuscate_key); + CLevelDBBatch batch(&obfuscate_key); batch.Write(key, value); return WriteBatch(batch, fSync); } @@ -172,7 +237,7 @@ public: template <typename K> bool Erase(const K& key, bool fSync = false) throw(leveldb_error) { - CLevelDBBatch batch(obfuscate_key); + CLevelDBBatch batch(&obfuscate_key); batch.Erase(key); return WriteBatch(batch, fSync); } @@ -187,14 +252,13 @@ public: bool Sync() throw(leveldb_error) { - CLevelDBBatch batch(obfuscate_key); + CLevelDBBatch batch(&obfuscate_key); return WriteBatch(batch, true); } - // not exactly clean encapsulation, but it's easiest for now - leveldb::Iterator* NewIterator() + CLevelDBIterator *NewIterator() { - return pdb->NewIterator(iteroptions); + return new CLevelDBIterator(pdb->NewIterator(iteroptions), &obfuscate_key); } /** diff --git a/src/main.cpp b/src/main.cpp index 5cfb05b0d2..e931d40c94 100644 --- a/src/main.cpp +++ b/src/main.cpp @@ -75,7 +75,7 @@ uint64_t nPruneTarget = 0; bool fAlerts = DEFAULT_ALERTS; /** Fees smaller than this (in satoshi) are considered zero fee (for relaying and mining) */ -CFeeRate minRelayTxFee = CFeeRate(1000); +CFeeRate minRelayTxFee = CFeeRate(5000); CTxMemPool mempool(::minRelayTxFee); @@ -4955,7 +4955,16 @@ bool SendMessages(CNode* pto, bool fSendTrickle) if ((nSyncStarted == 0 && fFetch) || pindexBestHeader->GetBlockTime() > GetAdjustedTime() - 24 * 60 * 60) { state.fSyncStarted = true; nSyncStarted++; - CBlockIndex *pindexStart = pindexBestHeader->pprev ? pindexBestHeader->pprev : pindexBestHeader; + const CBlockIndex *pindexStart = pindexBestHeader; + /* If possible, start at the block preceding the currently + best known header. This ensures that we always get a + non-empty list of headers back as long as the peer + is up-to-date. With a non-empty response, we can initialise + the peer's known best block. This wouldn't be possible + if we requested starting at pindexBestHeader and + got back an empty response. */ + if (pindexStart->pprev) + pindexStart = pindexStart->pprev; LogPrint("net", "initial getheaders (%d) to peer=%d (startheight:%d)\n", pindexStart->nHeight, pto->id, pto->nStartingHeight); pto->PushMessage("getheaders", chainActive.GetLocator(pindexStart), uint256()); } diff --git a/src/pow.cpp b/src/pow.cpp index bb53ad204b..5ace3fbc9b 100644 --- a/src/pow.cpp +++ b/src/pow.cpp @@ -52,6 +52,9 @@ unsigned int GetNextWorkRequired(const CBlockIndex* pindexLast, const CBlockHead unsigned int CalculateNextWorkRequired(const CBlockIndex* pindexLast, int64_t nFirstBlockTime, const Consensus::Params& params) { + if (params.fPowNoRetargeting) + return pindexLast->nBits; + // Limit adjustment step int64_t nActualTimespan = pindexLast->GetBlockTime() - nFirstBlockTime; LogPrintf(" nActualTimespan = %d before bounds\n", nActualTimespan); diff --git a/src/qt/bitcoin.cpp b/src/qt/bitcoin.cpp index ea7f86d18e..89d2d44fd7 100644 --- a/src/qt/bitcoin.cpp +++ b/src/qt/bitcoin.cpp @@ -597,8 +597,10 @@ int main(int argc, char *argv[]) // - Needs to be done before createOptionsModel // Check for -testnet or -regtest parameter (Params() calls are only valid after this clause) - if (!SelectParamsFromCommandLine()) { - QMessageBox::critical(0, QObject::tr("Bitcoin Core"), QObject::tr("Error: Invalid combination of -regtest and -testnet.")); + try { + SelectParams(ChainNameFromCommandLine()); + } catch(std::exception &e) { + QMessageBox::critical(0, QObject::tr("Bitcoin Core"), QObject::tr("Error: %1").arg(e.what())); return 1; } #ifdef ENABLE_WALLET diff --git a/src/test/README.md b/src/test/README.md index e36112bd4f..b2d6be14f1 100644 --- a/src/test/README.md +++ b/src/test/README.md @@ -16,6 +16,8 @@ their tests in a test suite called "<source_filename>_tests". For an examples of this pattern, examine uint160_tests.cpp and uint256_tests.cpp. +Add the source files to /src/Makefile.test.include to add them to the build. + For further reading, I found the following website to be helpful in explaining how the boost unit test framework works: [http://www.alittlemadness.com/2009/03/31/c-unit-testing-with-boosttest/](http://www.alittlemadness.com/2009/03/31/c-unit-testing-with-boosttest/). diff --git a/src/test/leveldbwrapper_tests.cpp b/src/test/leveldbwrapper_tests.cpp index db04f3ea48..606313b004 100644 --- a/src/test/leveldbwrapper_tests.cpp +++ b/src/test/leveldbwrapper_tests.cpp @@ -46,7 +46,86 @@ BOOST_AUTO_TEST_CASE(leveldbwrapper) BOOST_CHECK_EQUAL(res.ToString(), in.ToString()); } } - + +// Test batch operations +BOOST_AUTO_TEST_CASE(leveldbwrapper_batch) +{ + // Perform tests both obfuscated and non-obfuscated. + for (int i = 0; i < 2; i++) { + bool obfuscate = (bool)i; + path ph = temp_directory_path() / unique_path(); + CLevelDBWrapper dbw(ph, (1 << 20), true, false, obfuscate); + + char key = 'i'; + uint256 in = GetRandHash(); + char key2 = 'j'; + uint256 in2 = GetRandHash(); + char key3 = 'k'; + uint256 in3 = GetRandHash(); + + uint256 res; + CLevelDBBatch batch(&dbw.GetObfuscateKey()); + + batch.Write(key, in); + batch.Write(key2, in2); + batch.Write(key3, in3); + + // Remove key3 before it's even been written + batch.Erase(key3); + + dbw.WriteBatch(batch); + + BOOST_CHECK(dbw.Read(key, res)); + BOOST_CHECK_EQUAL(res.ToString(), in.ToString()); + BOOST_CHECK(dbw.Read(key2, res)); + BOOST_CHECK_EQUAL(res.ToString(), in2.ToString()); + + // key3 never should've been written + BOOST_CHECK(dbw.Read(key3, res) == false); + } +} + +BOOST_AUTO_TEST_CASE(leveldbwrapper_iterator) +{ + // Perform tests both obfuscated and non-obfuscated. + for (int i = 0; i < 2; i++) { + bool obfuscate = (bool)i; + path ph = temp_directory_path() / unique_path(); + CLevelDBWrapper dbw(ph, (1 << 20), true, false, obfuscate); + + // The two keys are intentionally chosen for ordering + char key = 'j'; + uint256 in = GetRandHash(); + BOOST_CHECK(dbw.Write(key, in)); + char key2 = 'k'; + uint256 in2 = GetRandHash(); + BOOST_CHECK(dbw.Write(key2, in2)); + + boost::scoped_ptr<CLevelDBIterator> it(const_cast<CLevelDBWrapper*>(&dbw)->NewIterator()); + + // Be sure to seek past the obfuscation key (if it exists) + it->Seek(key); + + char key_res; + uint256 val_res; + + it->GetKey(key_res); + it->GetValue(val_res); + BOOST_CHECK_EQUAL(key_res, key); + BOOST_CHECK_EQUAL(val_res.ToString(), in.ToString()); + + it->Next(); + + it->GetKey(key_res); + it->GetValue(val_res); + BOOST_CHECK_EQUAL(key_res, key2); + BOOST_CHECK_EQUAL(val_res.ToString(), in2.ToString()); + + it->Next(); + BOOST_CHECK_EQUAL(it->Valid(), false); + } +} + // Test that we do not obfuscation if there is existing data. BOOST_AUTO_TEST_CASE(existing_data_no_obfuscate) { diff --git a/src/test/test_bitcoin.cpp b/src/test/test_bitcoin.cpp index 8d81275a6f..a74fbfc0d7 100644 --- a/src/test/test_bitcoin.cpp +++ b/src/test/test_bitcoin.cpp @@ -32,13 +32,13 @@ CWallet* pwalletMain; extern bool fPrintToConsole; extern void noui_connect(); -BasicTestingSetup::BasicTestingSetup(CBaseChainParams::Network network) +BasicTestingSetup::BasicTestingSetup(const std::string& chainName) { ECC_Start(); SetupEnvironment(); fPrintToDebugLog = false; // don't want to write to debug.log file fCheckBlockIndex = true; - SelectParams(network); + SelectParams(chainName); noui_connect(); } @@ -47,7 +47,7 @@ BasicTestingSetup::~BasicTestingSetup() ECC_Stop(); } -TestingSetup::TestingSetup(CBaseChainParams::Network network) : BasicTestingSetup(network) +TestingSetup::TestingSetup(const std::string& chainName) : BasicTestingSetup(chainName) { #ifdef ENABLE_WALLET bitdb.MakeMock(); diff --git a/src/test/test_bitcoin.h b/src/test/test_bitcoin.h index b9314d0611..0bab4b6831 100644 --- a/src/test/test_bitcoin.h +++ b/src/test/test_bitcoin.h @@ -12,7 +12,7 @@ * This just configures logging and chain parameters. */ struct BasicTestingSetup { - BasicTestingSetup(CBaseChainParams::Network network = CBaseChainParams::MAIN); + BasicTestingSetup(const std::string& chainName = CBaseChainParams::MAIN); ~BasicTestingSetup(); }; @@ -25,7 +25,7 @@ struct TestingSetup: public BasicTestingSetup { boost::filesystem::path pathTemp; boost::thread_group threadGroup; - TestingSetup(CBaseChainParams::Network network = CBaseChainParams::MAIN); + TestingSetup(const std::string& chainName = CBaseChainParams::MAIN); ~TestingSetup(); }; diff --git a/src/test/transaction_tests.cpp b/src/test/transaction_tests.cpp index 9847f6512e..f9423bc0de 100644 --- a/src/test/transaction_tests.cpp +++ b/src/test/transaction_tests.cpp @@ -345,7 +345,7 @@ BOOST_AUTO_TEST_CASE(test_IsStandard) t.vout[0].nValue = 501; // dust BOOST_CHECK(!IsStandardTx(t, reason)); - t.vout[0].nValue = 601; // not dust + t.vout[0].nValue = 2730; // not dust BOOST_CHECK(IsStandardTx(t, reason)); t.vout[0].scriptPubKey = CScript() << OP_1; diff --git a/src/txdb.cpp b/src/txdb.cpp index 9738dea03d..a441aea688 100644 --- a/src/txdb.cpp +++ b/src/txdb.cpp @@ -49,7 +49,7 @@ uint256 CCoinsViewDB::GetBestBlock() const { } bool CCoinsViewDB::BatchWrite(CCoinsMap &mapCoins, const uint256 &hashBlock) { - CLevelDBBatch batch(db.GetObfuscateKey()); + CLevelDBBatch batch(&db.GetObfuscateKey()); size_t count = 0; size_t changed = 0; for (CCoinsMap::iterator it = mapCoins.begin(); it != mapCoins.end();) { @@ -98,8 +98,8 @@ bool CCoinsViewDB::GetStats(CCoinsStats &stats) const { /* It seems that there are no "const iterators" for LevelDB. Since we only need read operations on it, use a const-cast to get around that restriction. */ - boost::scoped_ptr<leveldb::Iterator> pcursor(const_cast<CLevelDBWrapper*>(&db)->NewIterator()); - pcursor->SeekToFirst(); + boost::scoped_ptr<CLevelDBIterator> pcursor(const_cast<CLevelDBWrapper*>(&db)->NewIterator()); + pcursor->Seek(DB_COINS); CHashWriter ss(SER_GETHASH, PROTOCOL_VERSION); stats.hashBlock = GetBestBlock(); @@ -107,22 +107,10 @@ bool CCoinsViewDB::GetStats(CCoinsStats &stats) const { CAmount nTotalAmount = 0; while (pcursor->Valid()) { boost::this_thread::interruption_point(); - try { - leveldb::Slice slKey = pcursor->key(); - CDataStream ssKey(slKey.data(), slKey.data()+slKey.size(), SER_DISK, CLIENT_VERSION); - char chType; - ssKey >> chType; - if (chType == DB_COINS) { - leveldb::Slice slValue = pcursor->value(); - CDataStream ssValue(slValue.data(), slValue.data()+slValue.size(), SER_DISK, CLIENT_VERSION); - CCoins coins; - ssValue >> coins; - uint256 txhash; - ssKey >> txhash; - ss << txhash; - ss << VARINT(coins.nVersion); - ss << (coins.fCoinBase ? 'c' : 'n'); - ss << VARINT(coins.nHeight); + std::pair<char, uint256> key; + CCoins coins; + if (pcursor->GetKey(key) && key.first == DB_COINS) { + if (pcursor->GetValue(coins)) { stats.nTransactions++; for (unsigned int i=0; i<coins.vout.size(); i++) { const CTxOut &out = coins.vout[i]; @@ -133,13 +121,15 @@ bool CCoinsViewDB::GetStats(CCoinsStats &stats) const { nTotalAmount += out.nValue; } } - stats.nSerializedSize += 32 + slValue.size(); + stats.nSerializedSize += 32 + pcursor->GetKeySize(); ss << VARINT(0); + } else { + return error("CCoinsViewDB::GetStats() : unable to read value"); } - pcursor->Next(); - } catch (const std::exception& e) { - return error("%s: Deserialize or I/O error - %s", __func__, e.what()); + } else { + break; } + pcursor->Next(); } { LOCK(cs_main); @@ -151,7 +141,7 @@ bool CCoinsViewDB::GetStats(CCoinsStats &stats) const { } bool CBlockTreeDB::WriteBatchSync(const std::vector<std::pair<int, const CBlockFileInfo*> >& fileInfo, int nLastFile, const std::vector<const CBlockIndex*>& blockinfo) { - CLevelDBBatch batch(GetObfuscateKey()); + CLevelDBBatch batch(&GetObfuscateKey()); for (std::vector<std::pair<int, const CBlockFileInfo*> >::const_iterator it=fileInfo.begin(); it != fileInfo.end(); it++) { batch.Write(make_pair(DB_BLOCK_FILES, it->first), *it->second); } @@ -167,7 +157,7 @@ bool CBlockTreeDB::ReadTxIndex(const uint256 &txid, CDiskTxPos &pos) { } bool CBlockTreeDB::WriteTxIndex(const std::vector<std::pair<uint256, CDiskTxPos> >&vect) { - CLevelDBBatch batch(GetObfuscateKey()); + CLevelDBBatch batch(&GetObfuscateKey()); for (std::vector<std::pair<uint256,CDiskTxPos> >::const_iterator it=vect.begin(); it!=vect.end(); it++) batch.Write(make_pair(DB_TXINDEX, it->first), it->second); return WriteBatch(batch); @@ -187,26 +177,17 @@ bool CBlockTreeDB::ReadFlag(const std::string &name, bool &fValue) { bool CBlockTreeDB::LoadBlockIndexGuts() { - boost::scoped_ptr<leveldb::Iterator> pcursor(NewIterator()); + boost::scoped_ptr<CLevelDBIterator> pcursor(NewIterator()); - CDataStream ssKeySet(SER_DISK, CLIENT_VERSION); - ssKeySet << make_pair(DB_BLOCK_INDEX, uint256()); - pcursor->Seek(ssKeySet.str()); + pcursor->Seek(make_pair(DB_BLOCK_INDEX, uint256())); // Load mapBlockIndex while (pcursor->Valid()) { boost::this_thread::interruption_point(); - try { - leveldb::Slice slKey = pcursor->key(); - CDataStream ssKey(slKey.data(), slKey.data()+slKey.size(), SER_DISK, CLIENT_VERSION); - char chType; - ssKey >> chType; - if (chType == DB_BLOCK_INDEX) { - leveldb::Slice slValue = pcursor->value(); - CDataStream ssValue(slValue.data(), slValue.data()+slValue.size(), SER_DISK, CLIENT_VERSION); - CDiskBlockIndex diskindex; - ssValue >> diskindex; - + std::pair<char, uint256> key; + if (pcursor->GetKey(key) && key.first == DB_BLOCK_INDEX) { + CDiskBlockIndex diskindex; + if (pcursor->GetValue(diskindex)) { // Construct block index object CBlockIndex* pindexNew = InsertBlockIndex(diskindex.GetBlockHash()); pindexNew->pprev = InsertBlockIndex(diskindex.hashPrev); @@ -227,10 +208,10 @@ bool CBlockTreeDB::LoadBlockIndexGuts() pcursor->Next(); } else { - break; // if shutdown requested or finished loading block index + return error("LoadBlockIndex() : failed to read value"); } - } catch (const std::exception& e) { - return error("%s: Deserialize or I/O error - %s", __func__, e.what()); + } else { + break; } } diff --git a/src/univalue/.gitignore b/src/univalue/.gitignore index ca9e842348..a7a2ca9197 100644 --- a/src/univalue/.gitignore +++ b/src/univalue/.gitignore @@ -19,4 +19,13 @@ test-driver libtool ltmain.sh +*.a +*.la +*.lo +*.logs *.o +*.pc +*.trs + +.dirstamp +.libs diff --git a/src/univalue/Makefile.am b/src/univalue/Makefile.am index 2800f466dc..df9e66229c 100644 --- a/src/univalue/Makefile.am +++ b/src/univalue/Makefile.am @@ -5,20 +5,20 @@ ACLOCAL_AMFLAGS = -I build-aux/m4 include_HEADERS = include/univalue.h noinst_HEADERS = lib/univalue_escapes.h -lib_LTLIBRARIES = lib/libunivalue.la +lib_LTLIBRARIES = libunivalue.la pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = pc/libunivalue.pc -lib_libunivalue_la_SOURCES = \ +libunivalue_la_SOURCES = \ lib/univalue.cpp \ lib/univalue_read.cpp \ lib/univalue_write.cpp -lib_libunivalue_la_LDFLAGS = \ +libunivalue_la_LDFLAGS = \ -version-info $(LIBUNIVALUE_CURRENT):$(LIBUNIVALUE_REVISION):$(LIBUNIVALUE_AGE) \ -no-undefined -lib_libunivalue_la_CXXFLAGS = -I$(top_srcdir)/include +libunivalue_la_CXXFLAGS = -I$(top_srcdir)/include TESTS = test/unitester @@ -38,7 +38,7 @@ noinst_PROGRAMS = $(TESTS) TEST_DATA_DIR=test test_unitester_SOURCES = test/unitester.cpp -test_unitester_LDADD = lib/libunivalue.la +test_unitester_LDADD = libunivalue.la test_unitester_CXXFLAGS = -I$(top_srcdir)/include -DJSON_TEST_SRC=\"$(srcdir)/$(TEST_DATA_DIR)\" test_unitester_LDFLAGS = -static $(LIBTOOL_APP_LDFLAGS) diff --git a/src/univalue/build-aux/m4/.empty b/src/univalue/build-aux/m4/.empty deleted file mode 100644 index e69de29bb2..0000000000 --- a/src/univalue/build-aux/m4/.empty +++ /dev/null diff --git a/src/univalue/build-aux/m4/.gitignore b/src/univalue/build-aux/m4/.gitignore new file mode 100644 index 0000000000..f063686524 --- /dev/null +++ b/src/univalue/build-aux/m4/.gitignore @@ -0,0 +1 @@ +/*.m4 diff --git a/src/univalue/lib/.gitignore b/src/univalue/lib/.gitignore index ca8c16dcd4..ee7fc2851c 100644 --- a/src/univalue/lib/.gitignore +++ b/src/univalue/lib/.gitignore @@ -1,10 +1,2 @@ - -libunivalue-uninstalled.pc -libunivalue.pc -libunivalue.a gen - .libs -*.lo -*.la - diff --git a/src/univalue/test/.gitignore b/src/univalue/test/.gitignore index e4dea0df72..4afa094b10 100644 --- a/src/univalue/test/.gitignore +++ b/src/univalue/test/.gitignore @@ -1,7 +1 @@ - unitester - -*.log -*.trs - -.libs |