diff options
| -rw-r--r-- | src/qt/bitcoinstrings.cpp | 100 | ||||
| -rw-r--r-- | src/qt/locale/bitcoin_en.ts | 630 |
2 files changed, 348 insertions, 382 deletions
diff --git a/src/qt/bitcoinstrings.cpp b/src/qt/bitcoinstrings.cpp index 25c811183f..e397857faa 100644 --- a/src/qt/bitcoinstrings.cpp +++ b/src/qt/bitcoinstrings.cpp @@ -22,11 +22,8 @@ QT_TRANSLATE_NOOP("bitcoin-core", "" "It is also recommended to set alertnotify so you are notified of problems;\n" "for example: alertnotify=echo %%s | mail -s \"Bitcoin Alert\" admin@foo.com\n"), QT_TRANSLATE_NOOP("bitcoin-core", "" -"(default: 1, 1 = keep tx meta data e.g. account owner and payment request " -"information, 2 = drop tx meta data)"), -QT_TRANSLATE_NOOP("bitcoin-core", "" -"Acceptable ciphers (default: TLSv1.2+HIGH:TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!" -"3DES:@STRENGTH)"), +"(1 = keep tx meta data e.g. account owner and payment request information, 2 " +"= drop tx meta data)"), QT_TRANSLATE_NOOP("bitcoin-core", "" "Allow JSON-RPC connections from specified source. Valid for <ip> are a " "single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or " @@ -49,7 +46,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "" "running."), QT_TRANSLATE_NOOP("bitcoin-core", "" "Continuously rate-limit free transactions to <n>*1000 bytes per minute " -"(default:15)"), +"(default:%u)"), QT_TRANSLATE_NOOP("bitcoin-core", "" "Create new files with system default permissions, instead of umask 077 (only " "effective with disabled wallet functionality)"), @@ -75,9 +72,6 @@ QT_TRANSLATE_NOOP("bitcoin-core", "" "Error: Unsupported argument -socks found. Setting SOCKS version isn't " "possible anymore, only SOCKS5 proxies are supported."), QT_TRANSLATE_NOOP("bitcoin-core", "" -"Execute command when a network tx respends wallet tx input (%s=respend TxID, " -"%t=wallet TxID)"), -QT_TRANSLATE_NOOP("bitcoin-core", "" "Execute command when a relevant alert is received or we see a really long " "fork (%s in cmd is replaced by message)"), QT_TRANSLATE_NOOP("bitcoin-core", "" @@ -94,22 +88,24 @@ QT_TRANSLATE_NOOP("bitcoin-core", "" "creation (default: %s)"), QT_TRANSLATE_NOOP("bitcoin-core", "" "Flush database activity from memory pool to disk log every <n> megabytes " -"(default: 100)"), +"(default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "" -"How thorough the block verification of -checkblocks is (0-4, default: 3)"), +"How thorough the block verification of -checkblocks is (0-4, default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "" "If paytxfee is not set, include enough fee so transactions are confirmed on " -"average within n blocks (default: 1)"), +"average within n blocks (default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "" "In this mode -genproclimit controls how many blocks are generated " "immediately."), QT_TRANSLATE_NOOP("bitcoin-core", "" -"Listen for JSON-RPC connections on <port> (default: 8332 or testnet: 18332)"), +"Log transaction priority and fee per kB when mining blocks (default: %u)"), +QT_TRANSLATE_NOOP("bitcoin-core", "" +"Maintain a full transaction index, used by the getrawtransaction rpc call " +"(default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "" -"Number of seconds to keep misbehaving peers from reconnecting (default: " -"86400)"), +"Number of seconds to keep misbehaving peers from reconnecting (default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "" -"Output debugging information (default: 0, supplying <category> is optional)"), +"Output debugging information (default: %u, supplying <category> is optional)"), QT_TRANSLATE_NOOP("bitcoin-core", "" "Query for peer addresses via DNS lookup, if low on addresses (default: 1 " "unless -connect)"), @@ -120,7 +116,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "" "leave that many cores free, default: %d)"), QT_TRANSLATE_NOOP("bitcoin-core", "" "Set the processor limit for when generation is on (-1 = unlimited, default: " -"-1)"), +"%d)"), QT_TRANSLATE_NOOP("bitcoin-core", "" "This is a pre-release test build - use at your own risk - do not use for " "mining or merchant applications"), @@ -132,8 +128,8 @@ QT_TRANSLATE_NOOP("bitcoin-core", "" "Unable to bind to %s on this computer. Bitcoin Core is probably already " "running."), QT_TRANSLATE_NOOP("bitcoin-core", "" -"Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: -" -"proxy)"), +"Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: " +"%s)"), QT_TRANSLATE_NOOP("bitcoin-core", "" "Warning: -paytxfee is set very high! This is the transaction fee you will " "pay if you send a transaction."), @@ -159,14 +155,15 @@ QT_TRANSLATE_NOOP("bitcoin-core", "" QT_TRANSLATE_NOOP("bitcoin-core", "" "Whitelisted peers cannot be DoS banned and their transactions are always " "relayed, even if they are already in the mempool, useful e.g. for a gateway"), +QT_TRANSLATE_NOOP("bitcoin-core", "(default: %s)"), QT_TRANSLATE_NOOP("bitcoin-core", "(default: 1)"), -QT_TRANSLATE_NOOP("bitcoin-core", "(default: wallet.dat)"), QT_TRANSLATE_NOOP("bitcoin-core", "<category> can be:"), QT_TRANSLATE_NOOP("bitcoin-core", "Accept command line and JSON-RPC commands"), QT_TRANSLATE_NOOP("bitcoin-core", "Accept connections from outside (default: 1 if no -proxy or -connect)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Acceptable ciphers (default: %s)"), QT_TRANSLATE_NOOP("bitcoin-core", "Add a node to connect to and attempt to keep the connection open"), QT_TRANSLATE_NOOP("bitcoin-core", "Allow DNS lookups for -addnode, -seednode and -connect"), -QT_TRANSLATE_NOOP("bitcoin-core", "Always query for peer addresses via DNS lookup (default: 0)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Always query for peer addresses via DNS lookup (default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "Attempt to recover private keys from a corrupt wallet.dat"), QT_TRANSLATE_NOOP("bitcoin-core", "Block creation options:"), QT_TRANSLATE_NOOP("bitcoin-core", "Cannot downgrade wallet"), @@ -182,7 +179,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Copyright (C) 2009-%i The Bitcoin Core Develo QT_TRANSLATE_NOOP("bitcoin-core", "Corrupted block database detected"), QT_TRANSLATE_NOOP("bitcoin-core", "Could not parse -rpcbind value %s as network address"), QT_TRANSLATE_NOOP("bitcoin-core", "Debugging/Testing options:"), -QT_TRANSLATE_NOOP("bitcoin-core", "Disable safemode, override a real safe mode event (default: 0)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Disable safemode, override a real safe mode event (default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "Discover own IP address (default: 1 when listening and no -externalip)"), QT_TRANSLATE_NOOP("bitcoin-core", "Do not load the wallet and disable wallet RPC calls"), QT_TRANSLATE_NOOP("bitcoin-core", "Do you want to rebuild the block database now?"), @@ -201,13 +198,13 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Error: Unsupported argument -tor found, use - QT_TRANSLATE_NOOP("bitcoin-core", "Error: Wallet locked, unable to create transaction!"), QT_TRANSLATE_NOOP("bitcoin-core", "Failed to listen on any port. Use -listen=0 if you want this."), QT_TRANSLATE_NOOP("bitcoin-core", "Fee (in BTC/kB) to add to transactions you send (default: %s)"), -QT_TRANSLATE_NOOP("bitcoin-core", "Force safe mode (default: 0)"), -QT_TRANSLATE_NOOP("bitcoin-core", "Generate coins (default: 0)"), -QT_TRANSLATE_NOOP("bitcoin-core", "How many blocks to check at startup (default: 288, 0 = all)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Force safe mode (default: %u)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Generate coins (default: %u)"), +QT_TRANSLATE_NOOP("bitcoin-core", "How many blocks to check at startup (default: %u, 0 = all)"), QT_TRANSLATE_NOOP("bitcoin-core", "If <category> is not supplied, output all debugging information."), QT_TRANSLATE_NOOP("bitcoin-core", "Importing..."), QT_TRANSLATE_NOOP("bitcoin-core", "Imports blocks from external blk000??.dat file"), -QT_TRANSLATE_NOOP("bitcoin-core", "Include IP addresses in debug output (default: 0)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Include IP addresses in debug output (default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "Incorrect or no genesis block found. Wrong datadir for network?"), QT_TRANSLATE_NOOP("bitcoin-core", "Information"), QT_TRANSLATE_NOOP("bitcoin-core", "Initialization sanity check failed. Bitcoin Core is shutting down."), @@ -222,61 +219,60 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Invalid amount"), QT_TRANSLATE_NOOP("bitcoin-core", "Invalid netmask specified in -whitelist: '%s'"), QT_TRANSLATE_NOOP("bitcoin-core", "Keep at most <n> unconnectable blocks in memory (default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "Keep at most <n> unconnectable transactions in memory (default: %u)"), -QT_TRANSLATE_NOOP("bitcoin-core", "Limit size of signature cache to <n> entries (default: 50000)"), -QT_TRANSLATE_NOOP("bitcoin-core", "Listen for connections on <port> (default: 8333 or testnet: 18333)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Limit size of signature cache to <n> entries (default: %u)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Listen for JSON-RPC connections on <port> (default: %u or testnet: %u)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Listen for connections on <port> (default: %u or testnet: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "Loading addresses..."), QT_TRANSLATE_NOOP("bitcoin-core", "Loading block index..."), QT_TRANSLATE_NOOP("bitcoin-core", "Loading wallet..."), -QT_TRANSLATE_NOOP("bitcoin-core", "Log transaction priority and fee per kB when mining blocks (default: 0)"), -QT_TRANSLATE_NOOP("bitcoin-core", "Maintain a full transaction index (default: 0)"), -QT_TRANSLATE_NOOP("bitcoin-core", "Maintain at most <n> connections to peers (default: 125)"), -QT_TRANSLATE_NOOP("bitcoin-core", "Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000)"), -QT_TRANSLATE_NOOP("bitcoin-core", "Maximum per-connection send buffer, <n>*1000 bytes (default: 1000)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Maintain at most <n> connections to peers (default: %u)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Maximum per-connection receive buffer, <n>*1000 bytes (default: %u)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Maximum per-connection send buffer, <n>*1000 bytes (default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "Need to specify a port with -whitebind: '%s'"), QT_TRANSLATE_NOOP("bitcoin-core", "Node relay options:"), QT_TRANSLATE_NOOP("bitcoin-core", "Not enough file descriptors available."), -QT_TRANSLATE_NOOP("bitcoin-core", "Only accept block chain matching built-in checkpoints (default: 1)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Only accept block chain matching built-in checkpoints (default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "Only connect to nodes in network <net> (ipv4, ipv6 or onion)"), QT_TRANSLATE_NOOP("bitcoin-core", "Options:"), QT_TRANSLATE_NOOP("bitcoin-core", "Password for JSON-RPC connections"), -QT_TRANSLATE_NOOP("bitcoin-core", "Prepend debug output with timestamp (default: 1)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Prepend debug output with timestamp (default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "Print block on startup, if found in block index"), -QT_TRANSLATE_NOOP("bitcoin-core", "Print block tree on startup (default: 0)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Print block tree on startup (default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "RPC SSL options: (see the Bitcoin Wiki for SSL setup instructions)"), QT_TRANSLATE_NOOP("bitcoin-core", "RPC server options:"), QT_TRANSLATE_NOOP("bitcoin-core", "Randomly drop 1 of every <n> network messages"), QT_TRANSLATE_NOOP("bitcoin-core", "Randomly fuzz 1 of every <n> network messages"), QT_TRANSLATE_NOOP("bitcoin-core", "Rebuild block chain index from current blk000??.dat files"), -QT_TRANSLATE_NOOP("bitcoin-core", "Relay and mine data carrier transactions (default: 1)"), -QT_TRANSLATE_NOOP("bitcoin-core", "Relay non-P2SH multisig (default: 1)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Relay and mine data carrier transactions (default: %u)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Relay non-P2SH multisig (default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "Rescan the block chain for missing wallet transactions"), QT_TRANSLATE_NOOP("bitcoin-core", "Rescanning..."), -QT_TRANSLATE_NOOP("bitcoin-core", "Run a thread to flush wallet periodically (default: 1)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Run a thread to flush wallet periodically (default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "Run in the background as a daemon and accept commands"), QT_TRANSLATE_NOOP("bitcoin-core", "Send trace/debug info to console instead of debug.log file"), -QT_TRANSLATE_NOOP("bitcoin-core", "Server certificate file (default: server.cert)"), -QT_TRANSLATE_NOOP("bitcoin-core", "Server private key (default: server.pem)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Server certificate file (default: %s)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Server private key (default: %s)"), QT_TRANSLATE_NOOP("bitcoin-core", "Set database cache size in megabytes (%d to %d, default: %d)"), -QT_TRANSLATE_NOOP("bitcoin-core", "Set key pool size to <n> (default: 100)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Set key pool size to <n> (default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "Set maximum block size in bytes (default: %d)"), -QT_TRANSLATE_NOOP("bitcoin-core", "Set minimum block size in bytes (default: 0)"), -QT_TRANSLATE_NOOP("bitcoin-core", "Set the number of threads to service RPC calls (default: 4)"), -QT_TRANSLATE_NOOP("bitcoin-core", "Sets the DB_PRIVATE flag in the wallet db environment (default: 1)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Set minimum block size in bytes (default: %u)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Set the number of threads to service RPC calls (default: %d)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Sets the DB_PRIVATE flag in the wallet db environment (default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "Show all debugging options (usage: --help -help-debug)"), QT_TRANSLATE_NOOP("bitcoin-core", "Shrink debug.log file on client startup (default: 1 when no -debug)"), QT_TRANSLATE_NOOP("bitcoin-core", "Signing transaction failed"), -QT_TRANSLATE_NOOP("bitcoin-core", "Specify configuration file (default: bitcoin.conf)"), -QT_TRANSLATE_NOOP("bitcoin-core", "Specify connection timeout in milliseconds (default: 5000)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Specify configuration file (default: %s)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Specify connection timeout in milliseconds (minimum: 1, default: %d)"), QT_TRANSLATE_NOOP("bitcoin-core", "Specify data directory"), -QT_TRANSLATE_NOOP("bitcoin-core", "Specify pid file (default: bitcoind.pid)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Specify pid file (default: %s)"), QT_TRANSLATE_NOOP("bitcoin-core", "Specify wallet file (within data directory)"), QT_TRANSLATE_NOOP("bitcoin-core", "Specify your own public address"), -QT_TRANSLATE_NOOP("bitcoin-core", "Spend unconfirmed change when sending transactions (default: 1)"), -QT_TRANSLATE_NOOP("bitcoin-core", "Stop running after importing blocks from disk (default: 0)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Spend unconfirmed change when sending transactions (default: %u)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Stop running after importing blocks from disk (default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "This help message"), QT_TRANSLATE_NOOP("bitcoin-core", "This is experimental software."), QT_TRANSLATE_NOOP("bitcoin-core", "This is intended for regression testing tools and app development."), -QT_TRANSLATE_NOOP("bitcoin-core", "Threshold for disconnecting misbehaving peers (default: 100)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Threshold for disconnecting misbehaving peers (default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "To use the %s option"), QT_TRANSLATE_NOOP("bitcoin-core", "Transaction amount too small"), QT_TRANSLATE_NOOP("bitcoin-core", "Transaction amounts must be positive"), @@ -285,7 +281,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Unable to bind to %s on this computer (bind r QT_TRANSLATE_NOOP("bitcoin-core", "Unknown network specified in -onlynet: '%s'"), QT_TRANSLATE_NOOP("bitcoin-core", "Upgrade wallet to latest format"), QT_TRANSLATE_NOOP("bitcoin-core", "Use OpenSSL (https) for JSON-RPC connections"), -QT_TRANSLATE_NOOP("bitcoin-core", "Use UPnP to map the listening port (default: 0)"), +QT_TRANSLATE_NOOP("bitcoin-core", "Use UPnP to map the listening port (default: %u)"), QT_TRANSLATE_NOOP("bitcoin-core", "Use UPnP to map the listening port (default: 1 when listening)"), QT_TRANSLATE_NOOP("bitcoin-core", "Use the test network"), QT_TRANSLATE_NOOP("bitcoin-core", "Username for JSON-RPC connections"), diff --git a/src/qt/locale/bitcoin_en.ts b/src/qt/locale/bitcoin_en.ts index 5c3abef2e7..f16af5f201 100644 --- a/src/qt/locale/bitcoin_en.ts +++ b/src/qt/locale/bitcoin_en.ts @@ -286,27 +286,27 @@ <context> <name>BitcoinGUI</name> <message> - <location filename="../bitcoingui.cpp" line="+327"/> + <location filename="../bitcoingui.cpp" line="+309"/> <source>Sign &message...</source> <translation>Sign &message...</translation> </message> <message> - <location line="+348"/> + <location line="+339"/> <source>Synchronizing with network...</source> <translation>Synchronizing with network...</translation> </message> <message> - <location line="-420"/> + <location line="-405"/> <source>&Overview</source> <translation>&Overview</translation> </message> <message> - <location line="-142"/> + <location line="-129"/> <source>Node</source> <translation type="unfinished"></translation> </message> <message> - <location line="+143"/> + <location line="+130"/> <source>Show general overview of wallet</source> <translation>Show general overview of wallet</translation> </message> @@ -331,7 +331,7 @@ <translation>Quit application</translation> </message> <message> - <location line="+10"/> + <location line="+7"/> <location line="+2"/> <source>About &Qt</source> <translation>About &Qt</translation> @@ -347,7 +347,7 @@ <translation>&Options...</translation> </message> <message> - <location line="+9"/> + <location line="+6"/> <source>&Encrypt Wallet...</source> <translation>&Encrypt Wallet...</translation> </message> @@ -377,13 +377,12 @@ <translation type="unfinished"></translation> </message> <message> - <location line="+175"/> - <location line="+5"/> + <location line="+172"/> <source>Bitcoin Core client</source> <translation type="unfinished"></translation> </message> <message> - <location line="+158"/> + <location line="+157"/> <source>Importing blocks from disk...</source> <translation>Importing blocks from disk...</translation> </message> @@ -393,17 +392,17 @@ <translation>Reindexing blocks on disk...</translation> </message> <message> - <location line="-418"/> + <location line="-403"/> <source>Send coins to a Bitcoin address</source> <translation>Send coins to a Bitcoin address</translation> </message> <message> - <location line="+49"/> + <location line="+46"/> <source>Modify configuration options for Bitcoin</source> <translation>Modify configuration options for Bitcoin</translation> </message> <message> - <location line="+12"/> + <location line="+9"/> <source>Backup wallet to another location</source> <translation>Backup wallet to another location</translation> </message> @@ -428,17 +427,17 @@ <translation>&Verify message...</translation> </message> <message> - <location line="+446"/> + <location line="+437"/> <source>Bitcoin</source> <translation>Bitcoin</translation> </message> <message> - <location line="-664"/> + <location line="-636"/> <source>Wallet</source> <translation>Wallet</translation> </message> <message> - <location line="+151"/> + <location line="+138"/> <source>&Send</source> <translation>&Send</translation> </message> @@ -448,13 +447,12 @@ <translation>&Receive</translation> </message> <message> - <location line="+33"/> + <location line="+30"/> <source>Show information about Bitcoin Core</source> <translation type="unfinished"></translation> </message> <message> - <location line="+13"/> - <location line="+2"/> + <location line="+12"/> <source>&Show / Hide</source> <translation>&Show / Hide</translation> </message> @@ -499,29 +497,22 @@ <translation>Tabs toolbar</translation> </message> <message> - <location line="-289"/> - <location line="+393"/> - <source>[testnet]</source> - <translation>[testnet]</translation> - </message> - <message> - <location line="-418"/> + <location line="-295"/> <source>Bitcoin Core</source> <translation type="unfinished">Bitcoin Core</translation> </message> <message> - <location line="+168"/> + <location line="+155"/> <source>Request payments (generates QR codes and bitcoin: URIs)</source> <translation type="unfinished"></translation> </message> <message> - <location line="+29"/> - <location line="+2"/> + <location line="+28"/> <source>&About Bitcoin Core</source> <translation type="unfinished"></translation> </message> <message> - <location line="+35"/> + <location line="+32"/> <source>Show the list of used sending addresses and labels</source> <translation type="unfinished"></translation> </message> @@ -546,7 +537,7 @@ <translation type="unfinished"></translation> </message> <message numerus="yes"> - <location line="+316"/> + <location line="+307"/> <source>%n active connection(s) to Bitcoin network</source> <translation> <numerusform>%n active connection to Bitcoin network</numerusform> @@ -1813,12 +1804,11 @@ Address: %4 <location line="+23"/> <location line="+23"/> <location line="+23"/> - <location line="+23"/> <source>N/A</source> <translation>N/A</translation> </message> <message> - <location line="-990"/> + <location line="-967"/> <source>Client version</source> <translation>Client version</translation> </message> @@ -1921,11 +1911,6 @@ Address: %4 </message> <message> <location line="+23"/> - <source>Sync Node</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+23"/> <source>Starting Height</source> <translation type="unfinished"></translation> </message> @@ -1970,7 +1955,7 @@ Address: %4 <translation type="unfinished"></translation> </message> <message> - <location line="-764"/> + <location line="-741"/> <source>Last block time</source> <translation>Last block time</translation> </message> @@ -2086,17 +2071,7 @@ Address: %4 <translation type="unfinished"></translation> </message> <message> - <location line="+2"/> - <source>Yes</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+0"/> - <source>No</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+12"/> + <location line="+13"/> <source>Unknown</source> <translation type="unfinished"></translation> </message> @@ -2853,7 +2828,7 @@ Address: %4 <context> <name>SplashScreen</name> <message> - <location filename="../splashscreen.cpp" line="+34"/> + <location filename="../splashscreen.cpp" line="+35"/> <source>Bitcoin Core</source> <translation type="unfinished">Bitcoin Core</translation> </message> @@ -2863,7 +2838,7 @@ Address: %4 <translation type="unfinished"></translation> </message> <message> - <location line="+1"/> + <location filename="../networkstyle.cpp" line="+19"/> <source>[testnet]</source> <translation>[testnet]</translation> </message> @@ -3418,7 +3393,7 @@ Address: %4 <context> <name>UnitDisplayStatusBarControl</name> <message> - <location filename="../bitcoingui.cpp" line="+103"/> + <location filename="../bitcoingui.cpp" line="+106"/> <source>Unit to show amounts in. Click to select another unit.</source> <translation type="unfinished"></translation> </message> @@ -3485,62 +3460,27 @@ Address: %4 <context> <name>bitcoin-core</name> <message> - <location filename="../bitcoinstrings.cpp" line="+240"/> + <location filename="../bitcoinstrings.cpp" line="+236"/> <source>Options:</source> <translation>Options:</translation> </message> <message> - <location line="+28"/> - <source>Specify configuration file (default: bitcoin.conf)</source> - <translation>Specify configuration file (default: bitcoin.conf)</translation> - </message> - <message> - <location line="+3"/> - <source>Specify pid file (default: bitcoind.pid)</source> - <translation>Specify pid file (default: bitcoind.pid)</translation> - </message> - <message> - <location line="-1"/> + <location line="+30"/> <source>Specify data directory</source> <translation>Specify data directory</translation> </message> <message> - <location line="-44"/> - <source>Listen for connections on <port> (default: 8333 or testnet: 18333)</source> - <translation>Listen for connections on <port> (default: 8333 or testnet: 18333)</translation> - </message> - <message> - <location line="+6"/> - <source>Maintain at most <n> connections to peers (default: 125)</source> - <translation>Maintain at most <n> connections to peers (default: 125)</translation> - </message> - <message> - <location line="-53"/> + <location line="-90"/> <source>Connect to a node to retrieve peer addresses, and disconnect</source> <translation>Connect to a node to retrieve peer addresses, and disconnect</translation> </message> <message> - <location line="+94"/> + <location line="+93"/> <source>Specify your own public address</source> <translation>Specify your own public address</translation> </message> <message> - <location line="+6"/> - <source>Threshold for disconnecting misbehaving peers (default: 100)</source> - <translation>Threshold for disconnecting misbehaving peers (default: 100)</translation> - </message> - <message> - <location line="-171"/> - <source>Number of seconds to keep misbehaving peers from reconnecting (default: 86400)</source> - <translation>Number of seconds to keep misbehaving peers from reconnecting (default: 86400)</translation> - </message> - <message> - <location line="-2"/> - <source>Listen for JSON-RPC connections on <port> (default: 8332 or testnet: 18332)</source> - <translation>Listen for JSON-RPC connections on <port> (default: 8332 or testnet: 18332)</translation> - </message> - <message> - <location line="+59"/> + <location line="-108"/> <source>Accept command line and JSON-RPC commands</source> <translation>Accept command line and JSON-RPC commands</translation> </message> @@ -3560,7 +3500,7 @@ Address: %4 <translation>Accept connections from outside (default: 1 if no -proxy or -connect)</translation> </message> <message> - <location line="-154"/> + <location line="-150"/> <source>%s, you must set a rpcpassword in the configuration file: %s It is recommended you use the following random password: @@ -3585,22 +3525,12 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. </translation> </message> <message> - <location line="+15"/> - <source>Acceptable ciphers (default: TLSv1.2+HIGH:TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!3DES:@STRENGTH)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+10"/> + <location line="+22"/> <source>Bind to given address and always listen on it. Use [host]:port notation for IPv6</source> <translation>Bind to given address and always listen on it. Use [host]:port notation for IPv6</translation> </message> <message> - <location line="+13"/> - <source>Continuously rate-limit free transactions to <n>*1000 bytes per minute (default:15)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+6"/> + <location line="+19"/> <source>Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup</source> <translation type="unfinished"></translation> </message> @@ -3620,37 +3550,22 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation>Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds!</translation> </message> <message> - <location line="+12"/> + <location line="+9"/> <source>Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)</source> <translation>Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)</translation> </message> <message> - <location line="+12"/> - <source>Flush database activity from memory pool to disk log every <n> megabytes (default: 100)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+3"/> - <source>How thorough the block verification of -checkblocks is (0-4, default: 3)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+5"/> + <location line="+20"/> <source>In this mode -genproclimit controls how many blocks are generated immediately.</source> <translation type="unfinished"></translation> </message> <message> - <location line="+15"/> + <location line="+17"/> <source>Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d)</source> <translation type="unfinished"></translation> </message> <message> - <location line="+3"/> - <source>Set the processor limit for when generation is on (-1 = unlimited, default: -1)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+3"/> + <location line="+6"/> <source>This is a pre-release test build - use at your own risk - do not use for mining or merchant applications</source> <translation>This is a pre-release test build - use at your own risk - do not use for mining or merchant applications</translation> </message> @@ -3660,12 +3575,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation type="unfinished"></translation> </message> <message> - <location line="+3"/> - <source>Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: -proxy)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+3"/> + <location line="+6"/> <source>Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction.</source> <translation>Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction.</translation> </message> @@ -3690,22 +3600,17 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation>Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup.</translation> </message> <message> - <location line="+10"/> + <location line="+11"/> <source>(default: 1)</source> <translation type="unfinished"></translation> </message> <message> <location line="+1"/> - <source>(default: wallet.dat)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+1"/> <source><category> can be:</source> <translation type="unfinished"></translation> </message> <message> - <location line="+6"/> + <location line="+7"/> <source>Attempt to recover private keys from a corrupt wallet.dat</source> <translation>Attempt to recover private keys from a corrupt wallet.dat</translation> </message> @@ -3735,12 +3640,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation type="unfinished"></translation> </message> <message> - <location line="+1"/> - <source>Disable safemode, override a real safe mode event (default: 0)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+1"/> + <location line="+2"/> <source>Discover own IP address (default: 1 when listening and no -externalip)</source> <translation>Discover own IP address (default: 1 when listening and no -externalip)</translation> </message> @@ -3795,22 +3695,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation>Failed to listen on any port. Use -listen=0 if you want this.</translation> </message> <message> - <location line="+2"/> - <source>Force safe mode (default: 0)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+1"/> - <source>Generate coins (default: 0)</source> - <translation>Generate coins (default: 0)</translation> - </message> - <message> - <location line="+1"/> - <source>How many blocks to check at startup (default: 288, 0 = all)</source> - <translation>How many blocks to check at startup (default: 288, 0 = all)</translation> - </message> - <message> - <location line="+1"/> + <location line="+5"/> <source>If <category> is not supplied, output all debugging information.</source> <translation type="unfinished"></translation> </message> @@ -3830,7 +3715,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation type="unfinished"></translation> </message> <message> - <location line="+22"/> + <location line="+21"/> <source>Not enough file descriptors available.</source> <translation>Not enough file descriptors available.</translation> </message> @@ -3840,12 +3725,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation type="unfinished"></translation> </message> <message> - <location line="+3"/> - <source>Prepend debug output with timestamp (default: 1)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+7"/> + <location line="+10"/> <source>Rebuild block chain index from current blk000??.dat files</source> <translation>Rebuild block chain index from current blk000??.dat files</translation> </message> @@ -3860,32 +3740,22 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation type="unfinished"></translation> </message> <message> - <location line="+2"/> - <source>Set the number of threads to service RPC calls (default: 4)</source> - <translation>Set the number of threads to service RPC calls (default: 4)</translation> - </message> - <message> - <location line="+9"/> + <location line="+11"/> <source>Specify wallet file (within data directory)</source> <translation>Specify wallet file (within data directory)</translation> </message> <message> - <location line="+2"/> - <source>Spend unconfirmed change when sending transactions (default: 1)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+1"/> - <source>Stop running after importing blocks from disk (default: 0)</source> + <location line="+6"/> + <source>This is intended for regression testing tools and app development.</source> <translation type="unfinished"></translation> </message> <message> - <location line="+3"/> - <source>This is intended for regression testing tools and app development.</source> + <location line="+10"/> + <source>Use UPnP to map the listening port (default: %u)</source> <translation type="unfinished"></translation> </message> <message> - <location line="+14"/> + <location line="+4"/> <source>Verifying blocks...</source> <translation>Verifying blocks...</translation> </message> @@ -3910,17 +3780,12 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation>You need to rebuild the database using -reindex to change -txindex</translation> </message> <message> - <location line="-92"/> + <location line="-91"/> <source>Imports blocks from external blk000??.dat file</source> <translation>Imports blocks from external blk000??.dat file</translation> </message> <message> - <location line="-185"/> - <source>(default: 1, 1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+6"/> + <location line="-179"/> <source>Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times</source> <translation type="unfinished"></translation> </message> @@ -3945,7 +3810,12 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation type="unfinished"></translation> </message> <message> - <location line="+6"/> + <location line="+3"/> + <source>Continuously rate-limit free transactions to <n>*1000 bytes per minute (default:%u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+3"/> <source>Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality)</source> <translation type="unfinished"></translation> </message> @@ -3966,11 +3836,6 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. </message> <message> <location line="+3"/> - <source>Execute command when a network tx respends wallet tx input (%s=respend TxID, %t=wallet TxID)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+3"/> <source>Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)</source> <translation>Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)</translation> </message> @@ -3985,17 +3850,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation type="unfinished"></translation> </message> <message> - <location line="+8"/> - <source>If paytxfee is not set, include enough fee so transactions are confirmed on average within n blocks (default: 1)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+11"/> - <source>Output debugging information (default: 0, supplying <category> is optional)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+2"/> + <location line="+23"/> <source>Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect)</source> <translation type="unfinished"></translation> </message> @@ -4025,12 +3880,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation type="unfinished"></translation> </message> <message> - <location line="+10"/> - <source>Always query for peer addresses via DNS lookup (default: 0)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+6"/> + <location line="+17"/> <source>Cannot resolve -whitebind address: '%s'</source> <translation type="unfinished"></translation> </message> @@ -4065,12 +3915,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation type="unfinished"></translation> </message> <message> - <location line="+7"/> - <source>Include IP addresses in debug output (default: 0)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+2"/> + <location line="+9"/> <source>Information</source> <translation>Information</translation> </message> @@ -4110,32 +3955,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation type="unfinished"></translation> </message> <message> - <location line="+1"/> - <source>Limit size of signature cache to <n> entries (default: 50000)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+5"/> - <source>Log transaction priority and fee per kB when mining blocks (default: 0)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+1"/> - <source>Maintain a full transaction index (default: 0)</source> - <translation>Maintain a full transaction index (default: 0)</translation> - </message> - <message> - <location line="+2"/> - <source>Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000)</source> - <translation>Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000)</translation> - </message> - <message> - <location line="+1"/> - <source>Maximum per-connection send buffer, <n>*1000 bytes (default: 1000)</source> - <translation>Maximum per-connection send buffer, <n>*1000 bytes (default: 1000)</translation> - </message> - <message> - <location line="+1"/> + <location line="+10"/> <source>Need to specify a port with -whitebind: '%s'</source> <translation type="unfinished"></translation> </message> @@ -4145,22 +3965,12 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation type="unfinished"></translation> </message> <message> - <location line="+2"/> - <source>Only accept block chain matching built-in checkpoints (default: 1)</source> - <translation>Only accept block chain matching built-in checkpoints (default: 1)</translation> - </message> - <message> - <location line="+5"/> + <location line="+7"/> <source>Print block on startup, if found in block index</source> <translation type="unfinished"></translation> </message> <message> - <location line="+1"/> - <source>Print block tree on startup (default: 0)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+1"/> + <location line="+2"/> <source>RPC SSL options: (see the Bitcoin Wiki for SSL setup instructions)</source> <translation type="unfinished"></translation> </message> @@ -4180,37 +3990,12 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation type="unfinished"></translation> </message> <message> - <location line="+2"/> - <source>Relay and mine data carrier transactions (default: 1)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+1"/> - <source>Relay non-P2SH multisig (default: 1)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+3"/> - <source>Run a thread to flush wallet periodically (default: 1)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+2"/> + <location line="+8"/> <source>Send trace/debug info to console instead of debug.log file</source> <translation>Send trace/debug info to console instead of debug.log file</translation> </message> <message> - <location line="+6"/> - <source>Set minimum block size in bytes (default: 0)</source> - <translation>Set minimum block size in bytes (default: 0)</translation> - </message> - <message> - <location line="+2"/> - <source>Sets the DB_PRIVATE flag in the wallet db environment (default: 1)</source> - <translation type="unfinished"></translation> - </message> - <message> - <location line="+1"/> + <location line="+9"/> <source>Show all debugging options (usage: --help -help-debug)</source> <translation type="unfinished"></translation> </message> @@ -4225,12 +4010,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation>Signing transaction failed</translation> </message> <message> - <location line="+2"/> - <source>Specify connection timeout in milliseconds (default: 5000)</source> - <translation>Specify connection timeout in milliseconds (default: 5000)</translation> - </message> - <message> - <location line="+8"/> + <location line="+10"/> <source>This is experimental software.</source> <translation type="unfinished"></translation> </message> @@ -4255,12 +4035,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation type="unfinished"></translation> </message> <message> - <location line="+4"/> - <source>Use UPnP to map the listening port (default: 0)</source> - <translation>Use UPnP to map the listening port (default: 0)</translation> - </message> - <message> - <location line="+1"/> + <location line="+5"/> <source>Use UPnP to map the listening port (default: 1 when listening)</source> <translation>Use UPnP to map the listening port (default: 1 when listening)</translation> </message> @@ -4315,22 +4090,17 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation>Password for JSON-RPC connections</translation> </message> <message> - <location line="-155"/> + <location line="-157"/> <source>Execute command when the best block changes (%s in cmd is replaced by block hash)</source> <translation>Execute command when the best block changes (%s in cmd is replaced by block hash)</translation> </message> <message> - <location line="+200"/> + <location line="+202"/> <source>Upgrade wallet to latest format</source> <translation>Upgrade wallet to latest format</translation> </message> <message> - <location line="-26"/> - <source>Set key pool size to <n> (default: 100)</source> - <translation>Set key pool size to <n> (default: 100)</translation> - </message> - <message> - <location line="-8"/> + <location line="-34"/> <source>Rescan the block chain for missing wallet transactions</source> <translation>Rescan the block chain for missing wallet transactions</translation> </message> @@ -4340,52 +4110,252 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation>Use OpenSSL (https) for JSON-RPC connections</translation> </message> <message> - <location line="-30"/> - <source>Server certificate file (default: server.cert)</source> - <translation>Server certificate file (default: server.cert)</translation> - </message> - <message> - <location line="+1"/> - <source>Server private key (default: server.pem)</source> - <translation>Server private key (default: server.pem)</translation> - </message> - <message> - <location line="+18"/> + <location line="-11"/> <source>This help message</source> <translation>This help message</translation> </message> <message> - <location line="-108"/> + <location line="-107"/> <source>Allow DNS lookups for -addnode, -seednode and -connect</source> <translation>Allow DNS lookups for -addnode, -seednode and -connect</translation> </message> <message> - <location line="+59"/> + <location line="+60"/> <source>Loading addresses...</source> <translation>Loading addresses...</translation> </message> <message> - <location line="-33"/> + <location line="-34"/> <source>Error loading wallet.dat: Wallet corrupted</source> <translation>Error loading wallet.dat: Wallet corrupted</translation> </message> <message> - <location line="-1"/> + <location line="-167"/> + <source>(1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+65"/> + <source>Flush database activity from memory pool to disk log every <n> megabytes (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+3"/> + <source>How thorough the block verification of -checkblocks is (0-4, default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+2"/> + <source>If paytxfee is not set, include enough fee so transactions are confirmed on average within n blocks (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+6"/> + <source>Log transaction priority and fee per kB when mining blocks (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+2"/> + <source>Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+3"/> + <source>Number of seconds to keep misbehaving peers from reconnecting (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+2"/> + <source>Output debugging information (default: %u, supplying <category> is optional)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+10"/> + <source>Set the processor limit for when generation is on (-1 = unlimited, default: %d)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+13"/> + <source>Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+28"/> + <source>(default: %s)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+5"/> + <source>Acceptable ciphers (default: %s)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+3"/> + <source>Always query for peer addresses via DNS lookup (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+16"/> + <source>Disable safemode, override a real safe mode event (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+8"/> <source>Error loading wallet.dat</source> <translation>Error loading wallet.dat</translation> </message> <message> - <location line="+23"/> + <location line="+11"/> + <source>Force safe mode (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+1"/> + <source>Generate coins (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+1"/> + <source>How many blocks to check at startup (default: %u, 0 = all)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+4"/> + <source>Include IP addresses in debug output (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+6"/> <source>Invalid -proxy address: '%s'</source> <translation>Invalid -proxy address: '%s'</translation> </message> <message> - <location line="+69"/> + <location line="+9"/> + <source>Limit size of signature cache to <n> entries (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+1"/> + <source>Listen for JSON-RPC connections on <port> (default: %u or testnet: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+1"/> + <source>Listen for connections on <port> (default: %u or testnet: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+4"/> + <source>Maintain at most <n> connections to peers (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+1"/> + <source>Maximum per-connection receive buffer, <n>*1000 bytes (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+1"/> + <source>Maximum per-connection send buffer, <n>*1000 bytes (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+4"/> + <source>Only accept block chain matching built-in checkpoints (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+4"/> + <source>Prepend debug output with timestamp (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+2"/> + <source>Print block tree on startup (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+6"/> + <source>Relay and mine data carrier transactions (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+1"/> + <source>Relay non-P2SH multisig (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+3"/> + <source>Run a thread to flush wallet periodically (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+3"/> + <source>Server certificate file (default: %s)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+1"/> + <source>Server private key (default: %s)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+2"/> + <source>Set key pool size to <n> (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+2"/> + <source>Set minimum block size in bytes (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+1"/> + <source>Set the number of threads to service RPC calls (default: %d)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+1"/> + <source>Sets the DB_PRIVATE flag in the wallet db environment (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+4"/> + <source>Specify configuration file (default: %s)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+1"/> + <source>Specify connection timeout in milliseconds (minimum: 1, default: %d)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+2"/> + <source>Specify pid file (default: %s)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+3"/> + <source>Spend unconfirmed change when sending transactions (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+1"/> + <source>Stop running after importing blocks from disk (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+4"/> + <source>Threshold for disconnecting misbehaving peers (default: %u)</source> + <translation type="unfinished"></translation> + </message> + <message> + <location line="+6"/> <source>Unknown network specified in -onlynet: '%s'</source> <translation>Unknown network specified in -onlynet: '%s'</translation> </message> <message> - <location line="-112"/> + <location line="-111"/> <source>Cannot resolve -bind address: '%s'</source> <translation>Cannot resolve -bind address: '%s'</translation> </message> @@ -4410,22 +4380,22 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation>Insufficient funds</translation> </message> <message> - <location line="+14"/> + <location line="+15"/> <source>Loading block index...</source> <translation>Loading block index...</translation> </message> <message> - <location line="-61"/> + <location line="-62"/> <source>Add a node to connect to and attempt to keep the connection open</source> <translation>Add a node to connect to and attempt to keep the connection open</translation> </message> <message> - <location line="+62"/> + <location line="+63"/> <source>Loading wallet...</source> <translation>Loading wallet...</translation> </message> <message> - <location line="-57"/> + <location line="-58"/> <source>Cannot downgrade wallet</source> <translation>Cannot downgrade wallet</translation> </message> @@ -4435,22 +4405,22 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. <translation>Cannot write default address</translation> </message> <message> - <location line="+77"/> + <location line="+76"/> <source>Rescanning...</source> <translation>Rescanning...</translation> </message> <message> - <location line="-64"/> + <location line="-63"/> <source>Done loading</source> <translation>Done loading</translation> </message> <message> - <location line="+91"/> + <location line="+90"/> <source>To use the %s option</source> <translation>To use the %s option</translation> </message> <message> - <location line="-83"/> + <location line="-82"/> <source>Error</source> <translation>Error</translation> </message> |