doc: Update manpages for 0.14.0

1 files changed, 69 insertions, 38 deletions

diff --git a/doc/man/bitcoin-qt.1 b/doc/man/bitcoin-qt.1
index 2129a151e2..c1edae22b3 100644
--- a/doc/man/bitcoin-qt.1
+++ b/doc/man/bitcoin-qt.1
@@ -1,9 +1,9 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.46.5.
-.TH BITCOIN-QT "1" "September 2016" "bitcoin-qt v0.13.0.0" "User Commands"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.3.
+.TH BITCOIN-QT "1" "February 2017" "bitcoin-qt v0.14.0.0" "User Commands"
 .SH NAME
-bitcoin-qt \- manual page for bitcoin-qt v0.13.0.0
+bitcoin-qt \- manual page for bitcoin-qt v0.14.0.0
 .SH DESCRIPTION
-Bitcoin Core version v0.13.0.0 (64\-bit)
+Bitcoin Core version v0.14.0.0\-dirty (64\-bit)
 Usage:
 .IP
 bitcoin\-qt [command\-line options]
@@ -27,13 +27,14 @@ long fork (%s in cmd is replaced by message)
 Execute command when the best block changes (%s in cmd is replaced by
 block hash)
 .HP
-\fB\-checkblocks=\fR<n>
+\fB\-assumevalid=\fR<hex>
 .IP
-How many blocks to check at startup (default: 288, 0 = all)
-.HP
-\fB\-checklevel=\fR<n>
-.IP
-How thorough the block verification of \fB\-checkblocks\fR is (0\-4, default: 3)
+If this block is in the chain assume that it and its ancestors are valid
+and potentially skip their script verification (0 to verify all,
+default:
+00000000000000000013176bf8d7dfeab4e1db31dc93bc311b436e82ab226b90,
+testnet:
+00000000000128796ee387cf110ccb9d2f36cffaf7f73079c995377c65ac0dcc)
 .HP
 \fB\-conf=\fR<file>
 .IP
@@ -62,11 +63,16 @@ Keep the transaction memory pool below <n> megabytes (default: 300)
 \fB\-mempoolexpiry=\fR<n>
 .IP
 Do not keep transactions in the mempool longer than <n> hours (default:
-72)
+336)
+.HP
+\fB\-blockreconstructionextratxn=\fR<n>
+.IP
+Extra transactions to keep in memory for compact block reconstructions
+(default: 100)
 .HP
 \fB\-par=\fR<n>
 .IP
-Set the number of script verification threads (\fB\-4\fR to 16, 0 = auto, <0 =
+Set the number of script verification threads (\fB\-6\fR to 16, 0 = auto, <0 =
 leave that many cores free, default: 0)
 .HP
 \fB\-pid=\fR<file>
@@ -75,13 +81,15 @@ Specify pid file (default: bitcoind.pid)
 .HP
 \fB\-prune=\fR<n>
 .IP
-Reduce storage requirements by enabling pruning (deleting) of old blocks.
-This allows the pruneblockchain RPC to be called to delete specific blocks,
-and enables automatic pruning of old blocks if a target size in MiB is
-provided. This mode is incompatible with \fB\-txindex\fR and \fB\-rescan\fR.
-Warning: Reverting this setting requires re\-downloading the entire blockchain.
-(default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >550 =
-automatically prune block files to stay under the specified target size in MiB)
+Reduce storage requirements by enabling pruning (deleting) of old
+blocks. This allows the pruneblockchain RPC to be called to
+delete specific blocks, and enables automatic pruning of old
+blocks if a target size in MiB is provided. This mode is
+incompatible with \fB\-txindex\fR and \fB\-rescan\fR. Warning: Reverting this
+setting requires re\-downloading the entire blockchain. (default:
+0 = disable pruning blocks, 1 = allow manual pruning via RPC,
+>550 = automatically prune block files to stay under the
+specified target size in MiB)
 .HP
 \fB\-reindex\-chainstate\fR
 .IP
@@ -123,7 +131,8 @@ for IPv6
 .HP
 \fB\-connect=\fR<ip>
 .IP
-Connect only to the specified node(s)
+Connect only to the specified node(s); \fB\-noconnect\fR or \fB\-connect\fR=\fI\,0\/\fR alone to
+disable automatic connections
 .HP
 \fB\-discover\fR
 .IP
@@ -137,7 +146,7 @@ Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (def
 \fB\-dnsseed\fR
 .IP
 Query for peer addresses via DNS lookup, if low on addresses (default: 1
-unless \fB\-connect\fR)
+unless \fB\-connect\fR/\-noconnect)
 .HP
 \fB\-externalip=\fR<ip>
 .IP
@@ -149,7 +158,8 @@ Always query for peer addresses via DNS lookup (default: 0)
 .HP
 \fB\-listen\fR
 .IP
-Accept connections from outside (default: 1 if no \fB\-proxy\fR or \fB\-connect\fR)
+Accept connections from outside (default: 1 if no \fB\-proxy\fR or
+\fB\-connect\fR/\-noconnect)
 .HP
 \fB\-listenonion\fR
 .IP
@@ -204,6 +214,11 @@ Connect through SOCKS5 proxy
 Randomize credentials for every proxy connection. This enables Tor
 stream isolation (default: 1)
 .HP
+\fB\-rpcserialversion\fR
+.IP
+Sets the serialization of raw transaction or block hex returned in
+non\-verbose mode, non\-segwit(0) or segwit(1) (default: 1)
+.HP
 \fB\-seednode=\fR<ip>
 .IP
 Connect to a node to retrieve peer addresses, and disconnect
@@ -221,17 +236,22 @@ Tor control port to use if onion listening enabled (default:
 .IP
 Tor control port password (default: empty)
 .HP
+\fB\-upnp\fR
+.IP
+Use UPnP to map the listening port (default: 0)
+.HP
 \fB\-whitebind=\fR<addr>
 .IP
 Bind to given address and whitelist peers connecting to it. Use
 [host]:port notation for IPv6
 .HP
-\fB\-whitelist=\fR<netmask>
+\fB\-whitelist=\fR<IP address or network>
 .IP
-Whitelist peers connecting from the given netmask or IP address. Can be
-specified multiple times. Whitelisted peers cannot be DoS banned
-and their transactions are always relayed, even if they are
-already in the mempool, useful e.g. for a gateway
+Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or
+CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple
+times. Whitelisted peers cannot be DoS banned and their
+transactions are always relayed, even if they are already in the
+mempool, useful e.g. for a gateway
 .HP
 \fB\-whitelistrelay\fR
 .IP
@@ -240,7 +260,7 @@ not relaying transactions (default: 1)
 .HP
 \fB\-whitelistforcerelay\fR
 .IP
-Force relay of transactions from whitelisted peers even they violate
+Force relay of transactions from whitelisted peers even if they violate
 local relay policy (default: 1)
 .HP
 \fB\-maxuploadtarget=\fR<n>
@@ -287,13 +307,17 @@ Spend unconfirmed change when sending transactions (default: 1)
 \fB\-txconfirmtarget=\fR<n>
 .IP
 If paytxfee is not set, include enough fee so transactions begin
-confirmation on average within n blocks (default: 2)
+confirmation on average within n blocks (default: 6)
 .HP
 \fB\-usehd\fR
 .IP
 Use hierarchical deterministic key generation (HD) after BIP32. Only has
 effect during wallet creation/first start (default: 1)
 .HP
+\fB\-walletrbf\fR
+.IP
+Send transactions with full\-RBF opt\-in enabled (default: 0)
+.HP
 \fB\-upgradewallet\fR
 .IP
 Upgrade wallet to latest format on startup
@@ -347,9 +371,9 @@ Append comment to the user agent string
 Output debugging information (default: 0, supplying <category> is
 optional). If <category> is not supplied or if <category> = 1,
 output all debugging information.<category> can be: addrman,
-alert, bench, coindb, db, http, libevent, lock, mempool,
-mempoolrej, net, proxy, prune, rand, reindex, rpc, selectcoins,
-tor, zmq, qt.
+alert, bench, cmpctblock, coindb, db, http, libevent, lock,
+mempool, mempoolrej, net, proxy, prune, rand, reindex, rpc,
+selectcoins, tor, zmq, qt.
 .HP
 \fB\-help\-debug\fR
 .IP
@@ -422,6 +446,11 @@ Set maximum block size in bytes (default: 750000)
 .IP
 Set maximum size of high\-priority/low\-fee transactions in bytes
 (default: 0)
+.HP
+\fB\-blockmintxfee=\fR<amt>
+.IP
+Set lowest fee rate (in BTC/kB) for transactions to be included in block
+creation. (default: 0.00001)
 .PP
 RPC server options:
 .HP
@@ -455,8 +484,10 @@ Password for JSON\-RPC connections
 .IP
 Username and hashed password for JSON\-RPC connections. The field
 <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
-canonical python script is included in share/rpcuser. This option
-can be specified multiple times
+canonical python script is included in share/rpcuser. The client
+then connects normally using the
+rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
+option can be specified multiple times
 .HP
 \fB\-rpcport=\fR<port>
 .IP
@@ -500,7 +531,7 @@ Show splash screen on startup (default: 1)
 .IP
 Reset all settings changed in the GUI
 .SH COPYRIGHT
-Copyright (C) 2009-2016 The Bitcoin Core developers
+Copyright (C) 2009-2017 The Bitcoin Core developers
 
 Please contribute if you find Bitcoin Core useful. Visit
 <https://bitcoincore.org> for further information about the software.
@@ -508,8 +539,8 @@ The source code is available from <https://github.com/bitcoin/bitcoin>.
 
 This is experimental software.
 Distributed under the MIT software license, see the accompanying file COPYING
-or <http://www.opensource.org/licenses/mit-license.php>.
+or <https://opensource.org/licenses/MIT>
 
 This product includes software developed by the OpenSSL Project for use in the
-OpenSSL Toolkit <https://www.openssl.org/> and cryptographic software written
-by Eric Young and UPnP software written by Thomas Bernard.
+OpenSSL Toolkit <https://www.openssl.org> and cryptographic software written by
+Eric Young and UPnP software written by Thomas Bernard.