doc: Manual pages update for 22.0rc2

Tree-SHA512: 361c6efdd21396ebf4358195e91bde81e7f7414e7022efc4d4a10da7cf3df7ce8cdadd277237921fdde9bae4b811d69d95fec56c010b823324ca69b40b966d41

6 files changed, 2001 insertions, 24 deletions

diff --git a/doc/man/bitcoin-cli.1 b/doc/man/bitcoin-cli.1
index 6bcad7006b..8bcbe08a9b 100644
--- a/doc/man/bitcoin-cli.1
+++ b/doc/man/bitcoin-cli.1
@@ -1,5 +1,163 @@
-.TH BITCOIN-CLI "1"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.13.
+.TH BITCOIN-CLI "1" "August 2021" "bitcoin-cli v22.0rc2" "User Commands"
 .SH NAME
-bitcoin-cli \- manual page for bitcoin-cli
-
-This is a placeholder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
+bitcoin-cli  manual page for bitcoin-cli v22.0rc2
+.SH SYNOPSIS
+.B bitcoin-cli
+[\fI\,options\/\fR] \fI\,<command> \/\fR[\fI\,params\/\fR]  \fI\,Send command to Bitcoin Core\/\fR
+.br
+.B bitcoin-cli
+[\fI\,options\/\fR] \fI\,-named <command> \/\fR[\fI\,name=value\/\fR]...  \fI\,Send command to Bitcoin Core (with named arguments)\/\fR
+.br
+.B bitcoin-cli
+[\fI\,options\/\fR] \fI\,help                List commands\/\fR
+.br
+.B bitcoin-cli
+[\fI\,options\/\fR] \fI\,help <command>      Get help for a command\/\fR
+.SH DESCRIPTION
+Bitcoin Core RPC client version v22.0rc2
+.SH OPTIONS
+.HP
+?
+.IP
+Print this help message and exit
+.HP
+\fBaddrinfo\fR
+.IP
+Get the number of addresses known to the node, per network and total.
+.HP
+\fBconf=\fR<file>
+.IP
+Specify configuration file. Relative paths will be prefixed by datadir
+location. (default: bitcoin.conf)
+.HP
+\fBdatadir=\fR<dir>
+.IP
+Specify data directory
+.HP
+\fBgenerate\fR
+.IP
+Generate blocks immediately, equivalent to RPC getnewaddress followed by
+RPC generatetoaddress. Optional positional integer arguments are
+number of blocks to generate (default: 1) and maximum iterations
+to try (default: 1000000), equivalent to RPC generatetoaddress
+nblocks and maxtries arguments. Example: bitcoincli \fBgenerate\fR 4
+1000
+.HP
+\fBgetinfo\fR
+.IP
+Get general information from the remote server. Note that unlike
+serverside RPC calls, the results of \fBgetinfo\fR is the result of
+multiple nonatomic requests. Some entries in the result may
+represent results from different states (e.g. wallet balance may
+be as of a different block from the chain state reported)
+.HP
+\fBnamed\fR
+.IP
+Pass named instead of positional arguments (default: false)
+.HP
+\fBnetinfo\fR
+.IP
+Get network peer connection information from the remote server. An
+optional integer argument from 0 to 4 can be passed for different
+peers listings (default: 0). Pass "help" for detailed help
+documentation.
+.HP
+\fBrpcclienttimeout=\fR<n>
+.IP
+Timeout in seconds during HTTP requests, or 0 for no timeout. (default:
+900)
+.HP
+\fBrpcconnect=\fR<ip>
+.IP
+Send commands to node running on <ip> (default: 127.0.0.1)
+.HP
+\fBrpccookiefile=\fR<loc>
+.IP
+Location of the auth cookie. Relative paths will be prefixed by a
+netspecific datadir location. (default: data dir)
+.HP
+\fBrpcpassword=\fR<pw>
+.IP
+Password for JSONRPC connections
+.HP
+\fBrpcport=\fR<port>
+.IP
+Connect to JSONRPC on <port> (default: 8332, testnet: 18332, signet:
+38332, regtest: 18443)
+.HP
+\fBrpcuser=\fR<user>
+.IP
+Username for JSONRPC connections
+.HP
+\fBrpcwait\fR
+.IP
+Wait for RPC server to start
+.HP
+\fBrpcwaittimeout=\fR<n>
+.IP
+Timeout in seconds to wait for the RPC server to start, or 0 for no
+timeout. (default: 0)
+.HP
+\fBrpcwallet=\fR<walletname>
+.IP
+Send RPC for nondefault wallet on RPC server (needs to exactly match
+corresponding \fBwallet\fR option passed to bitcoind). This changes
+the RPC endpoint used, e.g.
+http://127.0.0.1:8332/wallet/<walletname>
+.HP
+\fBstdin\fR
+.IP
+Read extra arguments from standard input, one per line until EOF/CtrlD
+(recommended for sensitive information such as passphrases). When
+combined with \fBstdinrpcpass\fR, the first line from standard input
+is used for the RPC password.
+.HP
+\fBstdinrpcpass\fR
+.IP
+Read RPC password from standard input as a single line. When combined
+with \fBstdin\fR, the first line from standard input is used for the
+RPC password. When combined with \fBstdinwalletpassphrase\fR,
+\fBstdinrpcpass\fR consumes the first line, and \fBstdinwalletpassphrase\fR
+consumes the second.
+.HP
+\fBstdinwalletpassphrase\fR
+.IP
+Read wallet passphrase from standard input as a single line. When
+combined with \fBstdin\fR, the first line from standard input is used
+for the wallet passphrase.
+.HP
+\fBversion\fR
+.IP
+Print version and exit
+.PP
+Debugging/Testing options:
+.PP
+Chain selection options:
+.HP
+\fBchain=\fR<chain>
+.IP
+Use the chain <chain> (default: main). Allowed values: main, test,
+signet, regtest
+.HP
+\fBsignet\fR
+.IP
+Use the signet chain. Equivalent to \fBchain\fR=\fI\,signet\/\fR. Note that the network
+is defined by the \fBsignetchallenge\fR parameter
+.HP
+\fBsignetchallenge\fR
+.IP
+Blocks must satisfy the given script to be considered valid (only for
+signet networks; defaults to the global default signet test
+network challenge)
+.HP
+\fBsignetseednode\fR
+.IP
+Specify a seed node for the signet network, in the hostname[:port]
+format, e.g. sig.net:1234 (may be used multiple times to specify
+multiple seed nodes; defaults to the global default signet test
+network seed node(s))
+.HP
+\fBtestnet\fR
+.IP
+Use the test chain. Equivalent to \fBchain\fR=\fI\,test\/\fR.
diff --git a/doc/man/bitcoin-qt.1 b/doc/man/bitcoin-qt.1
index ff4d1d2c7a..68fa6709f4 100644
--- a/doc/man/bitcoin-qt.1
+++ b/doc/man/bitcoin-qt.1
@@ -1,5 +1,780 @@
-.TH BITCOIN-QT "1"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.13.
+.TH BITCOIN-QT "1" "August 2021" "bitcoin-qt v22.0rc2" "User Commands"
 .SH NAME
-bitcoin-qt \- manual page for bitcoin-qt
-
-This is a placeholder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
+bitcoin-qt  manual page for bitcoin-qt v22.0rc2
+.SH SYNOPSIS
+.B bitcoin-qt
+[\fI\,command-line options\/\fR]
+.SH DESCRIPTION
+Bitcoin Core version v22.0rc2
+.SH OPTIONS
+.HP
+?
+.IP
+Print this help message and exit
+.HP
+\fBalertnotify=\fR<cmd>
+.IP
+Execute command when a relevant alert is received or we see a really
+long fork (%s in cmd is replaced by message)
+.HP
+\fBassumevalid=\fR<hex>
+.IP
+If this block is in the chain assume that it and its ancestors are valid
+and potentially skip their script verification (0 to verify all,
+default:
+00000000000000000008a89e854d57e5667df88f1cdef6fde2fbca1de5b639ad,
+testnet:
+0000000000004ae2f3896ca8ecd41c460a35bf6184e145d91558cece1c688a76,
+signet:
+000000187d4440e5bff91488b700a140441e089a8aaea707414982460edbfe54)
+.HP
+\fBblockfilterindex=\fR<type>
+.IP
+Maintain an index of compact filters by block (default: 0, values:
+basic). If <type> is not supplied or if <type> = 1, indexes for
+all known types are enabled.
+.HP
+\fBblocknotify=\fR<cmd>
+.IP
+Execute command when the best block changes (%s in cmd is replaced by
+block hash)
+.HP
+\fBblockreconstructionextratxn=\fR<n>
+.IP
+Extra transactions to keep in memory for compact block reconstructions
+(default: 100)
+.HP
+\fBblocksdir=\fR<dir>
+.IP
+Specify directory to hold blocks subdirectory for *.dat files (default:
+<datadir>)
+.HP
+\fBblocksonly\fR
+.IP
+Whether to reject transactions from network peers. Automatic broadcast
+and rebroadcast of any transactions from inbound peers is
+disabled, unless the peer has the 'forcerelay' permission. RPC
+transactions are not affected. (default: 0)
+.HP
+\fBcoinstatsindex\fR
+.IP
+Maintain coinstats index used by the gettxoutsetinfo RPC (default: 0)
+.HP
+\fBconf=\fR<file>
+.IP
+Specify path to readonly configuration file. Relative paths will be
+prefixed by datadir location. (default: bitcoin.conf)
+.HP
+\fBdaemon\fR
+.IP
+Run in the background as a daemon and accept commands (default: 0)
+.HP
+\fBdaemonwait\fR
+.IP
+Wait for initialization to be finished before exiting. This implies
+\fBdaemon\fR (default: 0)
+.HP
+\fBdatadir=\fR<dir>
+.IP
+Specify data directory
+.HP
+\fBdbcache=\fR<n>
+.IP
+Maximum database cache size <n> MiB (4 to 16384, default: 450). In
+addition, unused mempool memory is shared for this cache (see
+\fBmaxmempool\fR).
+.HP
+\fBdebuglogfile=\fR<file>
+.IP
+Specify location of debug log file. Relative paths will be prefixed by a
+netspecific datadir location. (\fBnodebuglogfile\fR to disable;
+default: debug.log)
+.HP
+\fBincludeconf=\fR<file>
+.IP
+Specify additional configuration file, relative to the \fBdatadir\fR path
+(only useable from configuration file, not command line)
+.HP
+\fBloadblock=\fR<file>
+.IP
+Imports blocks from external file on startup
+.HP
+\fBmaxmempool=\fR<n>
+.IP
+Keep the transaction memory pool below <n> megabytes (default: 300)
+.HP
+\fBmaxorphantx=\fR<n>
+.IP
+Keep at most <n> unconnectable transactions in memory (default: 100)
+.HP
+\fBmempoolexpiry=\fR<n>
+.IP
+Do not keep transactions in the mempool longer than <n> hours (default:
+336)
+.HP
+\fBpar=\fR<n>
+.IP
+Set the number of script verification threads (\fB6\fR to 15, 0 = auto, <0 =
+leave that many cores free, default: 0)
+.HP
+\fBpersistmempool\fR
+.IP
+Whether to save the mempool on shutdown and load on restart (default: 1)
+.HP
+\fBpid=\fR<file>
+.IP
+Specify pid file. Relative paths will be prefixed by a netspecific
+datadir location. (default: bitcoind.pid)
+.HP
+\fBprune=\fR<n>
+.IP
+Reduce storage requirements by enabling pruning (deleting) of old
+blocks. This allows the pruneblockchain RPC to be called to
+delete specific blocks, and enables automatic pruning of old
+blocks if a target size in MiB is provided. This mode is
+incompatible with \fBtxindex\fR, \fBcoinstatsindex\fR and \fBrescan\fR. Warning:
+Reverting this setting requires redownloading the entire
+blockchain. (default: 0 = disable pruning blocks, 1 = allow
+manual pruning via RPC, >=550 = automatically prune block files
+to stay under the specified target size in MiB)
+.HP
+\fBreindex\fR
+.IP
+Rebuild chain state and block index from the blk*.dat files on disk
+.HP
+\fBreindexchainstate\fR
+.IP
+Rebuild chain state from the currently indexed blocks. When in pruning
+mode or if blocks on disk might be corrupted, use full \fBreindex\fR
+instead.
+.HP
+\fBsettings=\fR<file>
+.IP
+Specify path to dynamic settings data file. Can be disabled with
+\fBnosettings\fR. File is written at runtime and not meant to be
+edited by users (use bitcoin.conf instead for custom settings).
+Relative paths will be prefixed by datadir location. (default:
+settings.json)
+.HP
+\fBstartupnotify=\fR<cmd>
+.IP
+Execute command on startup.
+.HP
+\fBsysperms\fR
+.IP
+Create new files with system default permissions, instead of umask 077
+(only effective with disabled wallet functionality)
+.HP
+\fBtxindex\fR
+.IP
+Maintain a full transaction index, used by the getrawtransaction rpc
+call (default: 0)
+.HP
+\fBversion\fR
+.IP
+Print version and exit
+.PP
+Connection options:
+.HP
+\fBaddnode=\fR<ip>
+.IP
+Add a node to connect to and attempt to keep the connection open (see
+the addnode RPC help for more info). This option can be specified
+multiple times to add multiple nodes; connections are limited to
+8 at a time and are counted separately from the \fBmaxconnections\fR
+limit.
+.HP
+\fBasmap=\fR<file>
+.IP
+Specify asn mapping used for bucketing of the peers (default:
+ip_asn.map). Relative paths will be prefixed by the netspecific
+datadir location.
+.HP
+\fBbantime=\fR<n>
+.IP
+Default duration (in seconds) of manually configured bans (default:
+86400)
+.HP
+\fBbind=\fR<addr>[:<port>][=onion]
+.IP
+Bind to given address and always listen on it (default: 0.0.0.0). Use
+[host]:port notation for IPv6. Append =onion to tag any incoming
+connections to that address and port as incoming Tor connections
+(default: 127.0.0.1:8334=onion, testnet: 127.0.0.1:18334=onion,
+signet: 127.0.0.1:38334=onion, regtest: 127.0.0.1:18445=onion)
+.HP
+\fBconnect=\fR<ip>
+.IP
+Connect only to the specified node; \fBnoconnect\fR disables automatic
+connections (the rules for this peer are the same as for
+\fBaddnode\fR). This option can be specified multiple times to connect
+to multiple nodes.
+.HP
+\fBdiscover\fR
+.IP
+Discover own IP addresses (default: 1 when listening and no \fBexternalip\fR
+or \fBproxy\fR)
+.HP
+\fBdns\fR
+.IP
+Allow DNS lookups for \fBaddnode\fR, \fBseednode\fR and \fBconnect\fR (default: 1)
+.HP
+\fBdnsseed\fR
+.IP
+Query for peer addresses via DNS lookup, if low on addresses (default: 1
+unless \fBconnect\fR used)
+.HP
+\fBexternalip=\fR<ip>
+.IP
+Specify your own public address
+.HP
+\fBfixedseeds\fR
+.IP
+Allow fixed seeds if DNS seeds don't provide peers (default: 1)
+.HP
+\fBforcednsseed\fR
+.IP
+Always query for peer addresses via DNS lookup (default: 0)
+.HP
+\fBi2pacceptincoming\fR
+.IP
+If set and \fBi2psam\fR is also set then incoming I2P connections are
+accepted via the SAM proxy. If this is not set but \fBi2psam\fR is set
+then only outgoing connections will be made to the I2P network.
+Ignored if \fBi2psam\fR is not set. Listening for incoming I2P
+connections is done through the SAM proxy, not by binding to a
+local address and port (default: 1)
+.HP
+\fBi2psam=\fR<ip:port>
+.IP
+I2P SAM proxy to reach I2P peers and accept I2P connections (default:
+none)
+.HP
+\fBlisten\fR
+.IP
+Accept connections from outside (default: 1 if no \fBproxy\fR or \fBconnect\fR)
+.HP
+\fBlistenonion\fR
+.IP
+Automatically create Tor onion service (default: 1)
+.HP
+\fBmaxconnections=\fR<n>
+.IP
+Maintain at most <n> connections to peers (default: 125). This limit
+does not apply to connections manually added via \fBaddnode\fR or the
+addnode RPC, which have a separate limit of 8.
+.HP
+\fBmaxreceivebuffer=\fR<n>
+.IP
+Maximum perconnection receive buffer, <n>*1000 bytes (default: 5000)
+.HP
+\fBmaxsendbuffer=\fR<n>
+.IP
+Maximum perconnection send buffer, <n>*1000 bytes (default: 1000)
+.HP
+\fBmaxtimeadjustment\fR
+.IP
+Maximum allowed median peer time offset adjustment. Local perspective of
+time may be influenced by peers forward or backward by this
+amount. (default: 4200 seconds)
+.HP
+\fBmaxuploadtarget=\fR<n>
+.IP
+Tries to keep outbound traffic under the given target (in MiB per 24h).
+Limit does not apply to peers with 'download' permission. 0 = no
+limit (default: 0)
+.HP
+\fBnatpmp\fR
+.IP
+Use NATPMP to map the listening port (default: 0)
+.HP
+\fBnetworkactive\fR
+.IP
+Enable all P2P network activity (default: 1). Can be changed by the
+setnetworkactive RPC command
+.HP
+\fBonion=\fR<ip:port>
+.IP
+Use separate SOCKS5 proxy to reach peers via Tor onion services, set
+\fBnoonion\fR to disable (default: \fBproxy\fR)
+.HP
+\fBonlynet=\fR<net>
+.IP
+Make outgoing connections only through network <net> (ipv4, ipv6, onion,
+i2p). Incoming connections are not affected by this option. This
+option can be specified multiple times to allow multiple
+networks. Warning: if it is used with nononion networks and the
+\fBonion\fR or \fBproxy\fR option is set, then outbound onion connections
+will still be made; use \fBnoonion\fR or \fBonion\fR=\fI\,0\/\fR to disable outbound
+onion connections in this case.
+.HP
+\fBpeerblockfilters\fR
+.IP
+Serve compact block filters to peers per BIP 157 (default: 0)
+.HP
+\fBpeerbloomfilters\fR
+.IP
+Support filtering of blocks and transaction with bloom filters (default:
+0)
+.HP
+\fBpermitbaremultisig\fR
+.IP
+Relay nonP2SH multisig (default: 1)
+.HP
+\fBport=\fR<port>
+.IP
+Listen for connections on <port>. Nodes not using the default ports
+(default: 8333, testnet: 18333, signet: 38333, regtest: 18444)
+are unlikely to get incoming connections. Not relevant for I2P
+(see doc/i2p.md).
+.HP
+\fBproxy=\fR<ip:port>
+.IP
+Connect through SOCKS5 proxy, set \fBnoproxy\fR to disable (default:
+disabled)
+.HP
+\fBproxyrandomize\fR
+.IP
+Randomize credentials for every proxy connection. This enables Tor
+stream isolation (default: 1)
+.HP
+\fBseednode=\fR<ip>
+.IP
+Connect to a node to retrieve peer addresses, and disconnect. This
+option can be specified multiple times to connect to multiple
+nodes.
+.HP
+\fBtimeout=\fR<n>
+.IP
+Specify socket connection timeout in milliseconds. If an initial attempt
+to connect is unsuccessful after this amount of time, drop it
+(minimum: 1, default: 5000)
+.HP
+\fBtorcontrol=\fR<ip>:<port>
+.IP
+Tor control port to use if onion listening enabled (default:
+127.0.0.1:9051)
+.HP
+\fBtorpassword=\fR<pass>
+.IP
+Tor control port password (default: empty)
+.HP
+\fBupnp\fR
+.IP
+Use UPnP to map the listening port (default: 0)
+.HP
+\fBwhitebind=\fR<[permissions@]addr>
+.IP
+Bind to the given address and add permission flags to the peers
+connecting to it. Use [host]:port notation for IPv6. Allowed
+permissions: bloomfilter (allow requesting BIP37 filtered blocks
+and transactions), noban (do not ban for misbehavior; implies
+download), forcerelay (relay transactions that are already in the
+mempool; implies relay), relay (relay even in \fBblocksonly\fR mode,
+and unlimited transaction announcements), mempool (allow
+requesting BIP35 mempool contents), download (allow getheaders
+during IBD, no disconnect after maxuploadtarget limit), addr
+(responses to GETADDR avoid hitting the cache and contain random
+records with the most uptodate info). Specify multiple
+permissions separated by commas (default:
+download,noban,mempool,relay). Can be specified multiple times.
+.HP
+\fBwhitelist=\fR<[permissions@]IP address or network>
+.IP
+Add permission flags to the peers connecting from the given IP address
+(e.g. 1.2.3.4) or CIDRnotated network (e.g. 1.2.3.0/24). Uses
+the same permissions as \fBwhitebind\fR. Can be specified multiple
+times.
+.PP
+Wallet options:
+.HP
+\fBaddresstype\fR
+.IP
+What type of addresses to use ("legacy", "p2shsegwit", or "bech32",
+default: "bech32")
+.HP
+\fBavoidpartialspends\fR
+.IP
+Group outputs by address, selecting many (possibly all) or none, instead
+of selecting on a peroutput basis. Privacy is improved as
+addresses are mostly swept with fewer transactions and outputs
+are aggregated in clean change addresses. It may result in higher
+fees due to less optimal coin selection caused by this added
+limitation and possibly a largerthannecessary number of inputs
+being used. Always enabled for wallets with "avoid_reuse"
+enabled, otherwise default: 0.
+.HP
+\fBchangetype\fR
+.IP
+What type of change to use ("legacy", "p2shsegwit", or "bech32").
+Default is same as \fBaddresstype\fR, except when
+\fBaddresstype\fR=\fI\,p2shsegwit\/\fR a native segwit output is used when
+sending to a native segwit address)
+.HP
+\fBdisablewallet\fR
+.IP
+Do not load the wallet and disable wallet RPC calls
+.HP
+\fBdiscardfee=\fR<amt>
+.IP
+The fee rate (in BTC/kvB) that indicates your tolerance for discarding
+change by adding it to the fee (default: 0.0001). Note: An output
+is discarded if it is dust at this rate, but we will always
+discard up to the dust relay fee and a discard fee above that is
+limited by the fee estimate for the longest target
+.HP
+\fBfallbackfee=\fR<amt>
+.IP
+A fee rate (in BTC/kvB) that will be used when fee estimation has
+insufficient data. 0 to entirely disable the fallbackfee feature.
+(default: 0.00)
+.HP
+\fBkeypool=\fR<n>
+.IP
+Set key pool size to <n> (default: 1000). Warning: Smaller sizes may
+increase the risk of losing funds when restoring from an old
+backup, if none of the addresses in the original keypool have
+been used.
+.HP
+\fBmaxapsfee=\fR<n>
+.IP
+Spend up to this amount in additional (absolute) fees (in BTC) if it
+allows the use of partial spend avoidance (default: 0.00)
+.HP
+\fBmintxfee=\fR<amt>
+.IP
+Fee rates (in BTC/kvB) smaller than this are considered zero fee for
+transaction creation (default: 0.00001)
+.HP
+\fBpaytxfee=\fR<amt>
+.IP
+Fee rate (in BTC/kvB) to add to transactions you send (default: 0.00)
+.HP
+\fBrescan\fR
+.IP
+Rescan the block chain for missing wallet transactions on startup
+.HP
+\fBsigner=\fR<cmd>
+.IP
+External signing tool, see doc/externalsigner.md
+.HP
+\fBspendzeroconfchange\fR
+.IP
+Spend unconfirmed change when sending transactions (default: 1)
+.HP
+\fBtxconfirmtarget=\fR<n>
+.IP
+If paytxfee is not set, include enough fee so transactions begin
+confirmation on average within n blocks (default: 6)
+.HP
+\fBwallet=\fR<path>
+.IP
+Specify wallet path to load at startup. Can be used multiple times to
+load multiple wallets. Path is to a directory containing wallet
+data and log files. If the path is not absolute, it is
+interpreted relative to <walletdir>. This only loads existing
+wallets and does not create new ones. For backwards compatibility
+this also accepts names of existing toplevel data files in
+<walletdir>.
+.HP
+\fBwalletbroadcast\fR
+.IP
+Make the wallet broadcast transactions (default: 1)
+.HP
+\fBwalletdir=\fR<dir>
+.IP
+Specify directory to hold wallets (default: <datadir>/wallets if it
+exists, otherwise <datadir>)
+.HP
+\fBwalletnotify=\fR<cmd>
+.IP
+Execute command when a wallet transaction changes. %s in cmd is replaced
+by TxID, %w is replaced by wallet name, %b is replaced by the
+hash of the block including the transaction (set to 'unconfirmed'
+if the transaction is not included) and %h is replaced by the
+block height (\fB1\fR if not included). %w is not currently
+implemented on windows. On systems where %w is supported, it
+should NOT be quoted because this would break shell escaping used
+to invoke the command.
+.HP
+\fBwalletrbf\fR
+.IP
+Send transactions with fullRBF optin enabled (RPC only, default: 0)
+.PP
+ZeroMQ notification options:
+.HP
+\fBzmqpubhashblock=\fR<address>
+.IP
+Enable publish hash block in <address>
+.HP
+\fBzmqpubhashblockhwm=\fR<n>
+.IP
+Set publish hash block outbound message high water mark (default: 1000)
+.HP
+\fBzmqpubhashtx=\fR<address>
+.IP
+Enable publish hash transaction in <address>
+.HP
+\fBzmqpubhashtxhwm=\fR<n>
+.IP
+Set publish hash transaction outbound message high water mark (default:
+1000)
+.HP
+\fBzmqpubrawblock=\fR<address>
+.IP
+Enable publish raw block in <address>
+.HP
+\fBzmqpubrawblockhwm=\fR<n>
+.IP
+Set publish raw block outbound message high water mark (default: 1000)
+.HP
+\fBzmqpubrawtx=\fR<address>
+.IP
+Enable publish raw transaction in <address>
+.HP
+\fBzmqpubrawtxhwm=\fR<n>
+.IP
+Set publish raw transaction outbound message high water mark (default:
+1000)
+.HP
+\fBzmqpubsequence=\fR<address>
+.IP
+Enable publish hash block and tx sequence in <address>
+.HP
+\fBzmqpubsequencehwm=\fR<n>
+.IP
+Set publish hash sequence message high water mark (default: 1000)
+.PP
+Debugging/Testing options:
+.HP
+\fBdebug=\fR<category>
+.IP
+Output debugging information (default: \fBnodebug\fR, supplying <category> is
+optional). If <category> is not supplied or if <category> = 1,
+output all debugging information. <category> can be: net, tor,
+mempool, http, bench, zmq, walletdb, rpc, estimatefee, addrman,
+selectcoins, reindex, cmpctblock, rand, prune, proxy, mempoolrej,
+libevent, coindb, qt, leveldb, validation, i2p, ipc. This option
+can be specified multiple times to output multiple categories.
+.HP
+\fBdebugexclude=\fR<category>
+.IP
+Exclude debugging information for a category. Can be used in conjunction
+with \fBdebug\fR=\fI\,1\/\fR to output debug logs for all categories except the
+specified category. This option can be specified multiple times
+to exclude multiple categories.
+.HP
+\fBhelpdebug\fR
+.IP
+Print help message with debugging options and exit
+.HP
+\fBlogips\fR
+.IP
+Include IP addresses in debug output (default: 0)
+.HP
+\fBlogsourcelocations\fR
+.IP
+Prepend debug output with name of the originating source location
+(source file, line number and function name) (default: 0)
+.HP
+\fBlogthreadnames\fR
+.IP
+Prepend debug output with name of the originating thread (only available
+on platforms supporting thread_local) (default: 0)
+.HP
+\fBlogtimestamps\fR
+.IP
+Prepend debug output with timestamp (default: 1)
+.HP
+\fBmaxtxfee=\fR<amt>
+.IP
+Maximum total fees (in BTC) to use in a single wallet transaction;
+setting this too low may abort large transactions (default: 0.10)
+.HP
+\fBprinttoconsole\fR
+.IP
+Send trace/debug info to console (default: 1 when no \fBdaemon\fR. To disable
+logging to file, set \fBnodebuglogfile\fR)
+.HP
+\fBshrinkdebugfile\fR
+.IP
+Shrink debug.log file on client startup (default: 1 when no \fBdebug\fR)
+.HP
+\fBuacomment=\fR<cmt>
+.IP
+Append comment to the user agent string
+.PP
+Chain selection options:
+.HP
+\fBchain=\fR<chain>
+.IP
+Use the chain <chain> (default: main). Allowed values: main, test,
+signet, regtest
+.HP
+\fBsignet\fR
+.IP
+Use the signet chain. Equivalent to \fBchain\fR=\fI\,signet\/\fR. Note that the network
+is defined by the \fBsignetchallenge\fR parameter
+.HP
+\fBsignetchallenge\fR
+.IP
+Blocks must satisfy the given script to be considered valid (only for
+signet networks; defaults to the global default signet test
+network challenge)
+.HP
+\fBsignetseednode\fR
+.IP
+Specify a seed node for the signet network, in the hostname[:port]
+format, e.g. sig.net:1234 (may be used multiple times to specify
+multiple seed nodes; defaults to the global default signet test
+network seed node(s))
+.HP
+\fBtestnet\fR
+.IP
+Use the test chain. Equivalent to \fBchain\fR=\fI\,test\/\fR.
+.PP
+Node relay options:
+.HP
+\fBbytespersigop\fR
+.IP
+Equivalent bytes per sigop in transactions for relay and mining
+(default: 20)
+.HP
+\fBdatacarrier\fR
+.IP
+Relay and mine data carrier transactions (default: 1)
+.HP
+\fBdatacarriersize\fR
+.IP
+Maximum size of data in data carrier transactions we relay and mine
+(default: 83)
+.HP
+\fBminrelaytxfee=\fR<amt>
+.IP
+Fees (in BTC/kvB) smaller than this are considered zero fee for
+relaying, mining and transaction creation (default: 0.00001)
+.HP
+\fBwhitelistforcerelay\fR
+.IP
+Add 'forcerelay' permission to whitelisted inbound peers with default
+permissions. This will relay transactions even if the
+transactions were already in the mempool. (default: 0)
+.HP
+\fBwhitelistrelay\fR
+.IP
+Add 'relay' permission to whitelisted inbound peers with default
+permissions. This will accept relayed transactions even when not
+relaying transactions (default: 1)
+.PP
+Block creation options:
+.HP
+\fBblockmaxweight=\fR<n>
+.IP
+Set maximum BIP141 block weight (default: 3996000)
+.HP
+\fBblockmintxfee=\fR<amt>
+.IP
+Set lowest fee rate (in BTC/kvB) for transactions to be included in
+block creation. (default: 0.00001)
+.PP
+RPC server options:
+.HP
+\fBrest\fR
+.IP
+Accept public REST requests (default: 0)
+.HP
+\fBrpcallowip=\fR<ip>
+.IP
+Allow JSONRPC connections from specified source. Valid for <ip> are a
+single IP (e.g. 1.2.3.4), a network/netmask (e.g.
+1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This
+option can be specified multiple times
+.HP
+\fBrpcauth=\fR<userpw>
+.IP
+Username and HMACSHA256 hashed password for JSONRPC connections. The
+field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
+canonical python script is included in share/rpcauth. The client
+then connects normally using the
+rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
+option can be specified multiple times
+.HP
+\fBrpcbind=\fR<addr>[:port]
+.IP
+Bind to given address to listen for JSONRPC connections. Do not expose
+the RPC server to untrusted networks such as the public internet!
+This option is ignored unless \fBrpcallowip\fR is also passed. Port is
+optional and overrides \fBrpcport\fR. Use [host]:port notation for
+IPv6. This option can be specified multiple times (default:
+127.0.0.1 and ::1 i.e., localhost)
+.HP
+\fBrpccookiefile=\fR<loc>
+.IP
+Location of the auth cookie. Relative paths will be prefixed by a
+netspecific datadir location. (default: data dir)
+.HP
+\fBrpcpassword=\fR<pw>
+.IP
+Password for JSONRPC connections
+.HP
+\fBrpcport=\fR<port>
+.IP
+Listen for JSONRPC connections on <port> (default: 8332, testnet:
+18332, signet: 38332, regtest: 18443)
+.HP
+\fBrpcserialversion\fR
+.IP
+Sets the serialization of raw transaction or block hex returned in
+nonverbose mode, nonsegwit(0) or segwit(1) (default: 1)
+.HP
+\fBrpcthreads=\fR<n>
+.IP
+Set the number of threads to service RPC calls (default: 4)
+.HP
+\fBrpcuser=\fR<user>
+.IP
+Username for JSONRPC connections
+.HP
+\fBrpcwhitelist=\fR<whitelist>
+.IP
+Set a whitelist to filter incoming RPC calls for a specific user. The
+field <whitelist> comes in the format: <USERNAME>:<rpc 1>,<rpc
+2>,...,<rpc n>. If multiple whitelists are set for a given user,
+they are setintersected. See \fBrpcwhitelistdefault\fR documentation
+for information on default whitelist behavior.
+.HP
+\fBrpcwhitelistdefault\fR
+.IP
+Sets default behavior for rpc whitelisting. Unless rpcwhitelistdefault
+is set to 0, if any \fBrpcwhitelist\fR is set, the rpc server acts as
+if all rpc users are subject to emptyunlessotherwisespecified
+whitelists. If rpcwhitelistdefault is set to 1 and no
+\fBrpcwhitelist\fR is set, rpc server acts as if all rpc users are
+subject to empty whitelists.
+.HP
+\fBserver\fR
+.IP
+Accept command line and JSONRPC commands
+.PP
+UI Options:
+.HP
+\fBchoosedatadir\fR
+.IP
+Choose data directory on startup (default: 0)
+.HP
+\fBlang=\fR<lang>
+.IP
+Set language, for example "de_DE" (default: system locale)
+.HP
+\fBmin\fR
+.IP
+Start minimized
+.HP
+\fBresetguisettings\fR
+.IP
+Reset all settings changed in the GUI
+.HP
+\fBsplash\fR
+.IP
+Show splash screen on startup (default: 1)
diff --git a/doc/man/bitcoin-tx.1 b/doc/man/bitcoin-tx.1
index 776bb46234..b088f98893 100644
--- a/doc/man/bitcoin-tx.1
+++ b/doc/man/bitcoin-tx.1
@@ -1,5 +1,135 @@
-.TH BITCOIN-TX "1"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.13.
+.TH BITCOIN-TX "1" "August 2021" "bitcoin-tx v22.0rc2" "User Commands"
 .SH NAME
-bitcoin-tx \- manual page for bitcoin-tx
-
-This is a placeholder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
+bitcoin-tx  manual page for bitcoin-tx v22.0rc2
+.SH SYNOPSIS
+.B bitcoin-tx
+[\fI\,options\/\fR] \fI\,<hex-tx> \/\fR[\fI\,commands\/\fR]  \fI\,Update hex-encoded bitcoin transaction\/\fR
+.br
+.B bitcoin-tx
+[\fI\,options\/\fR] \fI\,-create \/\fR[\fI\,commands\/\fR]   \fI\,Create hex-encoded bitcoin transaction\/\fR
+.SH DESCRIPTION
+Bitcoin Core bitcointx utility version v22.0rc2
+.SH OPTIONS
+.HP
+?
+.IP
+Print this help message and exit
+.HP
+\fBcreate\fR
+.IP
+Create new, empty TX.
+.HP
+\fBjson\fR
+.IP
+Select JSON output
+.HP
+\fBtxid\fR
+.IP
+Output only the hexencoded transaction id of the resultant transaction.
+.HP
+\fBversion\fR
+.IP
+Print version and exit
+.PP
+Debugging/Testing options:
+.PP
+Chain selection options:
+.HP
+\fBchain=\fR<chain>
+.IP
+Use the chain <chain> (default: main). Allowed values: main, test,
+signet, regtest
+.HP
+\fBsignet\fR
+.IP
+Use the signet chain. Equivalent to \fBchain\fR=\fI\,signet\/\fR. Note that the network
+is defined by the \fBsignetchallenge\fR parameter
+.HP
+\fBsignetchallenge\fR
+.IP
+Blocks must satisfy the given script to be considered valid (only for
+signet networks; defaults to the global default signet test
+network challenge)
+.HP
+\fBsignetseednode\fR
+.IP
+Specify a seed node for the signet network, in the hostname[:port]
+format, e.g. sig.net:1234 (may be used multiple times to specify
+multiple seed nodes; defaults to the global default signet test
+network seed node(s))
+.HP
+\fBtestnet\fR
+.IP
+Use the test chain. Equivalent to \fBchain\fR=\fI\,test\/\fR.
+.PP
+Commands:
+.IP
+delin=N
+.IP
+Delete input N from TX
+.IP
+delout=N
+.IP
+Delete output N from TX
+.IP
+in=TXID:VOUT(:SEQUENCE_NUMBER)
+.IP
+Add input to TX
+.IP
+locktime=N
+.IP
+Set TX lock time to N
+.IP
+nversion=N
+.IP
+Set TX version to N
+.IP
+outaddr=VALUE:ADDRESS
+.IP
+Add addressbased output to TX
+.IP
+outdata=[VALUE:]DATA
+.IP
+Add databased output to TX
+.IP
+outmultisig=VALUE:REQUIRED:PUBKEYS:PUBKEY1:PUBKEY2:....[:FLAGS]
+.IP
+Add Pay To nofm Multisig output to TX. n = REQUIRED, m = PUBKEYS.
+Optionally add the "W" flag to produce a
+paytowitnessscripthash output. Optionally add the "S" flag to
+wrap the output in a paytoscripthash.
+.IP
+outpubkey=VALUE:PUBKEY[:FLAGS]
+.IP
+Add paytopubkey output to TX. Optionally add the "W" flag to produce a
+paytowitnesspubkeyhash output. Optionally add the "S" flag to
+wrap the output in a paytoscripthash.
+.IP
+outscript=VALUE:SCRIPT[:FLAGS]
+.IP
+Add raw script output to TX. Optionally add the "W" flag to produce a
+paytowitnessscripthash output. Optionally add the "S" flag to
+wrap the output in a paytoscripthash.
+.IP
+replaceable(=N)
+.IP
+Set RBF optin sequence number for input N (if not provided, optin all
+available inputs)
+.IP
+sign=SIGHASHFLAGS
+.IP
+Add zero or more signatures to transaction. This command requires JSON
+registers:prevtxs=JSON object, privatekeys=JSON object. See
+signrawtransactionwithkey docs for format of sighash flags, JSON
+objects.
+.PP
+Register Commands:
+.IP
+load=NAME:FILENAME
+.IP
+Load JSON file FILENAME into register NAME
+.IP
+set=NAME:JSONSTRING
+.IP
+Set register NAME to given JSONSTRING
diff --git a/doc/man/bitcoin-util.1 b/doc/man/bitcoin-util.1
index 5c733c6e21..35a3ff05b8 100644
--- a/doc/man/bitcoin-util.1
+++ b/doc/man/bitcoin-util.1
@@ -1,5 +1,55 @@
-.TH BITCOIN-UTIL "1"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.13.
+.TH BITCOIN-UTIL "1" "August 2021" "bitcoin-util v22.0rc2" "User Commands"
 .SH NAME
-bitcoin-util \- manual page for bitcoin-util
-
-This is a placeholder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
+bitcoin-util  manual page for bitcoin-util v22.0rc2
+.SH SYNOPSIS
+.B bitcoin-util
+[\fI\,options\/\fR] [\fI\,commands\/\fR]  \fI\,Do stuff\/\fR
+.SH DESCRIPTION
+Bitcoin Core bitcoinutil utility version v22.0rc2
+.SH OPTIONS
+.HP
+?
+.IP
+Print this help message and exit
+.HP
+\fBversion\fR
+.IP
+Print version and exit
+.PP
+Debugging/Testing options:
+.PP
+Chain selection options:
+.HP
+\fBchain=\fR<chain>
+.IP
+Use the chain <chain> (default: main). Allowed values: main, test,
+signet, regtest
+.HP
+\fBsignet\fR
+.IP
+Use the signet chain. Equivalent to \fBchain\fR=\fI\,signet\/\fR. Note that the network
+is defined by the \fBsignetchallenge\fR parameter
+.HP
+\fBsignetchallenge\fR
+.IP
+Blocks must satisfy the given script to be considered valid (only for
+signet networks; defaults to the global default signet test
+network challenge)
+.HP
+\fBsignetseednode\fR
+.IP
+Specify a seed node for the signet network, in the hostname[:port]
+format, e.g. sig.net:1234 (may be used multiple times to specify
+multiple seed nodes; defaults to the global default signet test
+network seed node(s))
+.HP
+\fBtestnet\fR
+.IP
+Use the test chain. Equivalent to \fBchain\fR=\fI\,test\/\fR.
+.PP
+Commands:
+.IP
+grind
+.IP
+Perform proof of work on hex header string
diff --git a/doc/man/bitcoin-wallet.1 b/doc/man/bitcoin-wallet.1
index 2da43dec66..1a01718c20 100644
--- a/doc/man/bitcoin-wallet.1
+++ b/doc/man/bitcoin-wallet.1
@@ -1,5 +1,107 @@
-.TH BITCOIN-WALLET "1"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.13.
+.TH BITCOIN-WALLET "1" "August 2021" "bitcoin-wallet v22.0rc2" "User Commands"
 .SH NAME
-bitcoin-wallet \- manual page for bitcoin-wallet
-
-This is a placeholder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
+bitcoin-wallet  manual page for bitcoin-wallet v22.0rc2
+.SH DESCRIPTION
+Bitcoin Core bitcoinwallet version v22.0rc2
+.PP
+bitcoinwallet is an offline tool for creating and interacting with Bitcoin Core wallet files.
+By default bitcoinwallet will act on wallets in the default mainnet wallet directory in the datadir.
+To change the target wallet, use the \fBdatadir\fR, \fBwallet\fR and \fBtestnet\fR/regtest arguments.
+.SS "Usage:"
+.IP
+bitcoinwallet [options] <command>
+.SH OPTIONS
+.HP
+?
+.IP
+Print this help message and exit
+.HP
+\fBdatadir=\fR<dir>
+.IP
+Specify data directory
+.HP
+\fBdescriptors\fR
+.IP
+Create descriptors wallet. Only for 'create'
+.HP
+\fBdumpfile=\fR<file name>
+.IP
+When used with 'dump', writes out the records to this file. When used
+with 'createfromdump', loads the records into a new wallet.
+.HP
+\fBformat=\fR<format>
+.IP
+The format of the wallet file to create. Either "bdb" or "sqlite". Only
+used with 'createfromdump'
+.HP
+\fBversion\fR
+.IP
+Print version and exit
+.HP
+\fBwallet=\fR<walletname>
+.IP
+Specify wallet name
+.PP
+Debugging/Testing options:
+.HP
+\fBdebug=\fR<category>
+.IP
+Output debugging information (default: 0).
+.HP
+\fBprinttoconsole\fR
+.IP
+Send trace/debug info to console (default: 1 when no \fBdebug\fR is true, 0
+otherwise).
+.PP
+Chain selection options:
+.HP
+\fBchain=\fR<chain>
+.IP
+Use the chain <chain> (default: main). Allowed values: main, test,
+signet, regtest
+.HP
+\fBsignet\fR
+.IP
+Use the signet chain. Equivalent to \fBchain\fR=\fI\,signet\/\fR. Note that the network
+is defined by the \fBsignetchallenge\fR parameter
+.HP
+\fBsignetchallenge\fR
+.IP
+Blocks must satisfy the given script to be considered valid (only for
+signet networks; defaults to the global default signet test
+network challenge)
+.HP
+\fBsignetseednode\fR
+.IP
+Specify a seed node for the signet network, in the hostname[:port]
+format, e.g. sig.net:1234 (may be used multiple times to specify
+multiple seed nodes; defaults to the global default signet test
+network seed node(s))
+.HP
+\fBtestnet\fR
+.IP
+Use the test chain. Equivalent to \fBchain\fR=\fI\,test\/\fR.
+.PP
+Commands:
+.IP
+create
+.IP
+Create new wallet file
+.IP
+createfromdump
+.IP
+Create new wallet file from dumped records
+.IP
+dump
+.IP
+Print out all of the wallet keyvalue records
+.IP
+info
+.IP
+Get wallet info
+.IP
+salvage
+.IP
+Attempt to recover private keys from a corrupt wallet. Warning:
+\&'salvage' is experimental.
diff --git a/doc/man/bitcoind.1 b/doc/man/bitcoind.1
index 2c88f74520..2ab6c2a339 100644
--- a/doc/man/bitcoind.1
+++ b/doc/man/bitcoind.1
@@ -1,5 +1,767 @@
-.TH BITCOIND "1"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.13.
+.TH BITCOIND "1" "August 2021" "bitcoind v22.0rc2" "User Commands"
 .SH NAME
-bitcoind \- manual page for bitcoind
-
-This is a placeholder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
+bitcoind  manual page for bitcoind v22.0rc2
+.SH SYNOPSIS
+.B bitcoind
+[\fI\,options\/\fR]                     \fI\,Start Bitcoin Core\/\fR
+.SH DESCRIPTION
+Bitcoin Core version v22.0rc2
+Copyright \(co 20092021 The Bitcoin Core developers
+.PP
+Please contribute if you find Bitcoin Core useful. Visit
+<https://bitcoincore.org/> for further information about the software.
+The source code is available from <https://github.com/bitcoin/bitcoin>.
+.PP
+This is experimental software.
+Distributed under the MIT software license, see the accompanying file COPYING
+or <https://opensource.org/licenses/MIT>
+.SH OPTIONS
+.HP
+?
+.IP
+Print this help message and exit
+.HP
+\fBalertnotify=\fR<cmd>
+.IP
+Execute command when a relevant alert is received or we see a really
+long fork (%s in cmd is replaced by message)
+.HP
+\fBassumevalid=\fR<hex>
+.IP
+If this block is in the chain assume that it and its ancestors are valid
+and potentially skip their script verification (0 to verify all,
+default:
+00000000000000000008a89e854d57e5667df88f1cdef6fde2fbca1de5b639ad,
+testnet:
+0000000000004ae2f3896ca8ecd41c460a35bf6184e145d91558cece1c688a76,
+signet:
+000000187d4440e5bff91488b700a140441e089a8aaea707414982460edbfe54)
+.HP
+\fBblockfilterindex=\fR<type>
+.IP
+Maintain an index of compact filters by block (default: 0, values:
+basic). If <type> is not supplied or if <type> = 1, indexes for
+all known types are enabled.
+.HP
+\fBblocknotify=\fR<cmd>
+.IP
+Execute command when the best block changes (%s in cmd is replaced by
+block hash)
+.HP
+\fBblockreconstructionextratxn=\fR<n>
+.IP
+Extra transactions to keep in memory for compact block reconstructions
+(default: 100)
+.HP
+\fBblocksdir=\fR<dir>
+.IP
+Specify directory to hold blocks subdirectory for *.dat files (default:
+<datadir>)
+.HP
+\fBblocksonly\fR
+.IP
+Whether to reject transactions from network peers. Automatic broadcast
+and rebroadcast of any transactions from inbound peers is
+disabled, unless the peer has the 'forcerelay' permission. RPC
+transactions are not affected. (default: 0)
+.HP
+\fBcoinstatsindex\fR
+.IP
+Maintain coinstats index used by the gettxoutsetinfo RPC (default: 0)
+.HP
+\fBconf=\fR<file>
+.IP
+Specify path to readonly configuration file. Relative paths will be
+prefixed by datadir location. (default: bitcoin.conf)
+.HP
+\fBdaemon\fR
+.IP
+Run in the background as a daemon and accept commands (default: 0)
+.HP
+\fBdaemonwait\fR
+.IP
+Wait for initialization to be finished before exiting. This implies
+\fBdaemon\fR (default: 0)
+.HP
+\fBdatadir=\fR<dir>
+.IP
+Specify data directory
+.HP
+\fBdbcache=\fR<n>
+.IP
+Maximum database cache size <n> MiB (4 to 16384, default: 450). In
+addition, unused mempool memory is shared for this cache (see
+\fBmaxmempool\fR).
+.HP
+\fBdebuglogfile=\fR<file>
+.IP
+Specify location of debug log file. Relative paths will be prefixed by a
+netspecific datadir location. (\fBnodebuglogfile\fR to disable;
+default: debug.log)
+.HP
+\fBincludeconf=\fR<file>
+.IP
+Specify additional configuration file, relative to the \fBdatadir\fR path
+(only useable from configuration file, not command line)
+.HP
+\fBloadblock=\fR<file>
+.IP
+Imports blocks from external file on startup
+.HP
+\fBmaxmempool=\fR<n>
+.IP
+Keep the transaction memory pool below <n> megabytes (default: 300)
+.HP
+\fBmaxorphantx=\fR<n>
+.IP
+Keep at most <n> unconnectable transactions in memory (default: 100)
+.HP
+\fBmempoolexpiry=\fR<n>
+.IP
+Do not keep transactions in the mempool longer than <n> hours (default:
+336)
+.HP
+\fBpar=\fR<n>
+.IP
+Set the number of script verification threads (\fB6\fR to 15, 0 = auto, <0 =
+leave that many cores free, default: 0)
+.HP
+\fBpersistmempool\fR
+.IP
+Whether to save the mempool on shutdown and load on restart (default: 1)
+.HP
+\fBpid=\fR<file>
+.IP
+Specify pid file. Relative paths will be prefixed by a netspecific
+datadir location. (default: bitcoind.pid)
+.HP
+\fBprune=\fR<n>
+.IP
+Reduce storage requirements by enabling pruning (deleting) of old
+blocks. This allows the pruneblockchain RPC to be called to
+delete specific blocks, and enables automatic pruning of old
+blocks if a target size in MiB is provided. This mode is
+incompatible with \fBtxindex\fR, \fBcoinstatsindex\fR and \fBrescan\fR. Warning:
+Reverting this setting requires redownloading the entire
+blockchain. (default: 0 = disable pruning blocks, 1 = allow
+manual pruning via RPC, >=550 = automatically prune block files
+to stay under the specified target size in MiB)
+.HP
+\fBreindex\fR
+.IP
+Rebuild chain state and block index from the blk*.dat files on disk
+.HP
+\fBreindexchainstate\fR
+.IP
+Rebuild chain state from the currently indexed blocks. When in pruning
+mode or if blocks on disk might be corrupted, use full \fBreindex\fR
+instead.
+.HP
+\fBsettings=\fR<file>
+.IP
+Specify path to dynamic settings data file. Can be disabled with
+\fBnosettings\fR. File is written at runtime and not meant to be
+edited by users (use bitcoin.conf instead for custom settings).
+Relative paths will be prefixed by datadir location. (default:
+settings.json)
+.HP
+\fBstartupnotify=\fR<cmd>
+.IP
+Execute command on startup.
+.HP
+\fBsysperms\fR
+.IP
+Create new files with system default permissions, instead of umask 077
+(only effective with disabled wallet functionality)
+.HP
+\fBtxindex\fR
+.IP
+Maintain a full transaction index, used by the getrawtransaction rpc
+call (default: 0)
+.HP
+\fBversion\fR
+.IP
+Print version and exit
+.PP
+Connection options:
+.HP
+\fBaddnode=\fR<ip>
+.IP
+Add a node to connect to and attempt to keep the connection open (see
+the addnode RPC help for more info). This option can be specified
+multiple times to add multiple nodes; connections are limited to
+8 at a time and are counted separately from the \fBmaxconnections\fR
+limit.
+.HP
+\fBasmap=\fR<file>
+.IP
+Specify asn mapping used for bucketing of the peers (default:
+ip_asn.map). Relative paths will be prefixed by the netspecific
+datadir location.
+.HP
+\fBbantime=\fR<n>
+.IP
+Default duration (in seconds) of manually configured bans (default:
+86400)
+.HP
+\fBbind=\fR<addr>[:<port>][=onion]
+.IP
+Bind to given address and always listen on it (default: 0.0.0.0). Use
+[host]:port notation for IPv6. Append =onion to tag any incoming
+connections to that address and port as incoming Tor connections
+(default: 127.0.0.1:8334=onion, testnet: 127.0.0.1:18334=onion,
+signet: 127.0.0.1:38334=onion, regtest: 127.0.0.1:18445=onion)
+.HP
+\fBconnect=\fR<ip>
+.IP
+Connect only to the specified node; \fBnoconnect\fR disables automatic
+connections (the rules for this peer are the same as for
+\fBaddnode\fR). This option can be specified multiple times to connect
+to multiple nodes.
+.HP
+\fBdiscover\fR
+.IP
+Discover own IP addresses (default: 1 when listening and no \fBexternalip\fR
+or \fBproxy\fR)
+.HP
+\fBdns\fR
+.IP
+Allow DNS lookups for \fBaddnode\fR, \fBseednode\fR and \fBconnect\fR (default: 1)
+.HP
+\fBdnsseed\fR
+.IP
+Query for peer addresses via DNS lookup, if low on addresses (default: 1
+unless \fBconnect\fR used)
+.HP
+\fBexternalip=\fR<ip>
+.IP
+Specify your own public address
+.HP
+\fBfixedseeds\fR
+.IP
+Allow fixed seeds if DNS seeds don't provide peers (default: 1)
+.HP
+\fBforcednsseed\fR
+.IP
+Always query for peer addresses via DNS lookup (default: 0)
+.HP
+\fBi2pacceptincoming\fR
+.IP
+If set and \fBi2psam\fR is also set then incoming I2P connections are
+accepted via the SAM proxy. If this is not set but \fBi2psam\fR is set
+then only outgoing connections will be made to the I2P network.
+Ignored if \fBi2psam\fR is not set. Listening for incoming I2P
+connections is done through the SAM proxy, not by binding to a
+local address and port (default: 1)
+.HP
+\fBi2psam=\fR<ip:port>
+.IP
+I2P SAM proxy to reach I2P peers and accept I2P connections (default:
+none)
+.HP
+\fBlisten\fR
+.IP
+Accept connections from outside (default: 1 if no \fBproxy\fR or \fBconnect\fR)
+.HP
+\fBlistenonion\fR
+.IP
+Automatically create Tor onion service (default: 1)
+.HP
+\fBmaxconnections=\fR<n>
+.IP
+Maintain at most <n> connections to peers (default: 125). This limit
+does not apply to connections manually added via \fBaddnode\fR or the
+addnode RPC, which have a separate limit of 8.
+.HP
+\fBmaxreceivebuffer=\fR<n>
+.IP
+Maximum perconnection receive buffer, <n>*1000 bytes (default: 5000)
+.HP
+\fBmaxsendbuffer=\fR<n>
+.IP
+Maximum perconnection send buffer, <n>*1000 bytes (default: 1000)
+.HP
+\fBmaxtimeadjustment\fR
+.IP
+Maximum allowed median peer time offset adjustment. Local perspective of
+time may be influenced by peers forward or backward by this
+amount. (default: 4200 seconds)
+.HP
+\fBmaxuploadtarget=\fR<n>
+.IP
+Tries to keep outbound traffic under the given target (in MiB per 24h).
+Limit does not apply to peers with 'download' permission. 0 = no
+limit (default: 0)
+.HP
+\fBnatpmp\fR
+.IP
+Use NATPMP to map the listening port (default: 0)
+.HP
+\fBnetworkactive\fR
+.IP
+Enable all P2P network activity (default: 1). Can be changed by the
+setnetworkactive RPC command
+.HP
+\fBonion=\fR<ip:port>
+.IP
+Use separate SOCKS5 proxy to reach peers via Tor onion services, set
+\fBnoonion\fR to disable (default: \fBproxy\fR)
+.HP
+\fBonlynet=\fR<net>
+.IP
+Make outgoing connections only through network <net> (ipv4, ipv6, onion,
+i2p). Incoming connections are not affected by this option. This
+option can be specified multiple times to allow multiple
+networks. Warning: if it is used with nononion networks and the
+\fBonion\fR or \fBproxy\fR option is set, then outbound onion connections
+will still be made; use \fBnoonion\fR or \fBonion\fR=\fI\,0\/\fR to disable outbound
+onion connections in this case.
+.HP
+\fBpeerblockfilters\fR
+.IP
+Serve compact block filters to peers per BIP 157 (default: 0)
+.HP
+\fBpeerbloomfilters\fR
+.IP
+Support filtering of blocks and transaction with bloom filters (default:
+0)
+.HP
+\fBpermitbaremultisig\fR
+.IP
+Relay nonP2SH multisig (default: 1)
+.HP
+\fBport=\fR<port>
+.IP
+Listen for connections on <port>. Nodes not using the default ports
+(default: 8333, testnet: 18333, signet: 38333, regtest: 18444)
+are unlikely to get incoming connections. Not relevant for I2P
+(see doc/i2p.md).
+.HP
+\fBproxy=\fR<ip:port>
+.IP
+Connect through SOCKS5 proxy, set \fBnoproxy\fR to disable (default:
+disabled)
+.HP
+\fBproxyrandomize\fR
+.IP
+Randomize credentials for every proxy connection. This enables Tor
+stream isolation (default: 1)
+.HP
+\fBseednode=\fR<ip>
+.IP
+Connect to a node to retrieve peer addresses, and disconnect. This
+option can be specified multiple times to connect to multiple
+nodes.
+.HP
+\fBtimeout=\fR<n>
+.IP
+Specify socket connection timeout in milliseconds. If an initial attempt
+to connect is unsuccessful after this amount of time, drop it
+(minimum: 1, default: 5000)
+.HP
+\fBtorcontrol=\fR<ip>:<port>
+.IP
+Tor control port to use if onion listening enabled (default:
+127.0.0.1:9051)
+.HP
+\fBtorpassword=\fR<pass>
+.IP
+Tor control port password (default: empty)
+.HP
+\fBupnp\fR
+.IP
+Use UPnP to map the listening port (default: 0)
+.HP
+\fBwhitebind=\fR<[permissions@]addr>
+.IP
+Bind to the given address and add permission flags to the peers
+connecting to it. Use [host]:port notation for IPv6. Allowed
+permissions: bloomfilter (allow requesting BIP37 filtered blocks
+and transactions), noban (do not ban for misbehavior; implies
+download), forcerelay (relay transactions that are already in the
+mempool; implies relay), relay (relay even in \fBblocksonly\fR mode,
+and unlimited transaction announcements), mempool (allow
+requesting BIP35 mempool contents), download (allow getheaders
+during IBD, no disconnect after maxuploadtarget limit), addr
+(responses to GETADDR avoid hitting the cache and contain random
+records with the most uptodate info). Specify multiple
+permissions separated by commas (default:
+download,noban,mempool,relay). Can be specified multiple times.
+.HP
+\fBwhitelist=\fR<[permissions@]IP address or network>
+.IP
+Add permission flags to the peers connecting from the given IP address
+(e.g. 1.2.3.4) or CIDRnotated network (e.g. 1.2.3.0/24). Uses
+the same permissions as \fBwhitebind\fR. Can be specified multiple
+times.
+.PP
+Wallet options:
+.HP
+\fBaddresstype\fR
+.IP
+What type of addresses to use ("legacy", "p2shsegwit", or "bech32",
+default: "bech32")
+.HP
+\fBavoidpartialspends\fR
+.IP
+Group outputs by address, selecting many (possibly all) or none, instead
+of selecting on a peroutput basis. Privacy is improved as
+addresses are mostly swept with fewer transactions and outputs
+are aggregated in clean change addresses. It may result in higher
+fees due to less optimal coin selection caused by this added
+limitation and possibly a largerthannecessary number of inputs
+being used. Always enabled for wallets with "avoid_reuse"
+enabled, otherwise default: 0.
+.HP
+\fBchangetype\fR
+.IP
+What type of change to use ("legacy", "p2shsegwit", or "bech32").
+Default is same as \fBaddresstype\fR, except when
+\fBaddresstype\fR=\fI\,p2shsegwit\/\fR a native segwit output is used when
+sending to a native segwit address)
+.HP
+\fBdisablewallet\fR
+.IP
+Do not load the wallet and disable wallet RPC calls
+.HP
+\fBdiscardfee=\fR<amt>
+.IP
+The fee rate (in BTC/kvB) that indicates your tolerance for discarding
+change by adding it to the fee (default: 0.0001). Note: An output
+is discarded if it is dust at this rate, but we will always
+discard up to the dust relay fee and a discard fee above that is
+limited by the fee estimate for the longest target
+.HP
+\fBfallbackfee=\fR<amt>
+.IP
+A fee rate (in BTC/kvB) that will be used when fee estimation has
+insufficient data. 0 to entirely disable the fallbackfee feature.
+(default: 0.00)
+.HP
+\fBkeypool=\fR<n>
+.IP
+Set key pool size to <n> (default: 1000). Warning: Smaller sizes may
+increase the risk of losing funds when restoring from an old
+backup, if none of the addresses in the original keypool have
+been used.
+.HP
+\fBmaxapsfee=\fR<n>
+.IP
+Spend up to this amount in additional (absolute) fees (in BTC) if it
+allows the use of partial spend avoidance (default: 0.00)
+.HP
+\fBmintxfee=\fR<amt>
+.IP
+Fee rates (in BTC/kvB) smaller than this are considered zero fee for
+transaction creation (default: 0.00001)
+.HP
+\fBpaytxfee=\fR<amt>
+.IP
+Fee rate (in BTC/kvB) to add to transactions you send (default: 0.00)
+.HP
+\fBrescan\fR
+.IP
+Rescan the block chain for missing wallet transactions on startup
+.HP
+\fBsigner=\fR<cmd>
+.IP
+External signing tool, see doc/externalsigner.md
+.HP
+\fBspendzeroconfchange\fR
+.IP
+Spend unconfirmed change when sending transactions (default: 1)
+.HP
+\fBtxconfirmtarget=\fR<n>
+.IP
+If paytxfee is not set, include enough fee so transactions begin
+confirmation on average within n blocks (default: 6)
+.HP
+\fBwallet=\fR<path>
+.IP
+Specify wallet path to load at startup. Can be used multiple times to
+load multiple wallets. Path is to a directory containing wallet
+data and log files. If the path is not absolute, it is
+interpreted relative to <walletdir>. This only loads existing
+wallets and does not create new ones. For backwards compatibility
+this also accepts names of existing toplevel data files in
+<walletdir>.
+.HP
+\fBwalletbroadcast\fR
+.IP
+Make the wallet broadcast transactions (default: 1)
+.HP
+\fBwalletdir=\fR<dir>
+.IP
+Specify directory to hold wallets (default: <datadir>/wallets if it
+exists, otherwise <datadir>)
+.HP
+\fBwalletnotify=\fR<cmd>
+.IP
+Execute command when a wallet transaction changes. %s in cmd is replaced
+by TxID, %w is replaced by wallet name, %b is replaced by the
+hash of the block including the transaction (set to 'unconfirmed'
+if the transaction is not included) and %h is replaced by the
+block height (\fB1\fR if not included). %w is not currently
+implemented on windows. On systems where %w is supported, it
+should NOT be quoted because this would break shell escaping used
+to invoke the command.
+.HP
+\fBwalletrbf\fR
+.IP
+Send transactions with fullRBF optin enabled (RPC only, default: 0)
+.PP
+ZeroMQ notification options:
+.HP
+\fBzmqpubhashblock=\fR<address>
+.IP
+Enable publish hash block in <address>
+.HP
+\fBzmqpubhashblockhwm=\fR<n>
+.IP
+Set publish hash block outbound message high water mark (default: 1000)
+.HP
+\fBzmqpubhashtx=\fR<address>
+.IP
+Enable publish hash transaction in <address>
+.HP
+\fBzmqpubhashtxhwm=\fR<n>
+.IP
+Set publish hash transaction outbound message high water mark (default:
+1000)
+.HP
+\fBzmqpubrawblock=\fR<address>
+.IP
+Enable publish raw block in <address>
+.HP
+\fBzmqpubrawblockhwm=\fR<n>
+.IP
+Set publish raw block outbound message high water mark (default: 1000)
+.HP
+\fBzmqpubrawtx=\fR<address>
+.IP
+Enable publish raw transaction in <address>
+.HP
+\fBzmqpubrawtxhwm=\fR<n>
+.IP
+Set publish raw transaction outbound message high water mark (default:
+1000)
+.HP
+\fBzmqpubsequence=\fR<address>
+.IP
+Enable publish hash block and tx sequence in <address>
+.HP
+\fBzmqpubsequencehwm=\fR<n>
+.IP
+Set publish hash sequence message high water mark (default: 1000)
+.PP
+Debugging/Testing options:
+.HP
+\fBdebug=\fR<category>
+.IP
+Output debugging information (default: \fBnodebug\fR, supplying <category> is
+optional). If <category> is not supplied or if <category> = 1,
+output all debugging information. <category> can be: net, tor,
+mempool, http, bench, zmq, walletdb, rpc, estimatefee, addrman,
+selectcoins, reindex, cmpctblock, rand, prune, proxy, mempoolrej,
+libevent, coindb, qt, leveldb, validation, i2p, ipc. This option
+can be specified multiple times to output multiple categories.
+.HP
+\fBdebugexclude=\fR<category>
+.IP
+Exclude debugging information for a category. Can be used in conjunction
+with \fBdebug\fR=\fI\,1\/\fR to output debug logs for all categories except the
+specified category. This option can be specified multiple times
+to exclude multiple categories.
+.HP
+\fBhelpdebug\fR
+.IP
+Print help message with debugging options and exit
+.HP
+\fBlogips\fR
+.IP
+Include IP addresses in debug output (default: 0)
+.HP
+\fBlogsourcelocations\fR
+.IP
+Prepend debug output with name of the originating source location
+(source file, line number and function name) (default: 0)
+.HP
+\fBlogthreadnames\fR
+.IP
+Prepend debug output with name of the originating thread (only available
+on platforms supporting thread_local) (default: 0)
+.HP
+\fBlogtimestamps\fR
+.IP
+Prepend debug output with timestamp (default: 1)
+.HP
+\fBmaxtxfee=\fR<amt>
+.IP
+Maximum total fees (in BTC) to use in a single wallet transaction;
+setting this too low may abort large transactions (default: 0.10)
+.HP
+\fBprinttoconsole\fR
+.IP
+Send trace/debug info to console (default: 1 when no \fBdaemon\fR. To disable
+logging to file, set \fBnodebuglogfile\fR)
+.HP
+\fBshrinkdebugfile\fR
+.IP
+Shrink debug.log file on client startup (default: 1 when no \fBdebug\fR)
+.HP
+\fBuacomment=\fR<cmt>
+.IP
+Append comment to the user agent string
+.PP
+Chain selection options:
+.HP
+\fBchain=\fR<chain>
+.IP
+Use the chain <chain> (default: main). Allowed values: main, test,
+signet, regtest
+.HP
+\fBsignet\fR
+.IP
+Use the signet chain. Equivalent to \fBchain\fR=\fI\,signet\/\fR. Note that the network
+is defined by the \fBsignetchallenge\fR parameter
+.HP
+\fBsignetchallenge\fR
+.IP
+Blocks must satisfy the given script to be considered valid (only for
+signet networks; defaults to the global default signet test
+network challenge)
+.HP
+\fBsignetseednode\fR
+.IP
+Specify a seed node for the signet network, in the hostname[:port]
+format, e.g. sig.net:1234 (may be used multiple times to specify
+multiple seed nodes; defaults to the global default signet test
+network seed node(s))
+.HP
+\fBtestnet\fR
+.IP
+Use the test chain. Equivalent to \fBchain\fR=\fI\,test\/\fR.
+.PP
+Node relay options:
+.HP
+\fBbytespersigop\fR
+.IP
+Equivalent bytes per sigop in transactions for relay and mining
+(default: 20)
+.HP
+\fBdatacarrier\fR
+.IP
+Relay and mine data carrier transactions (default: 1)
+.HP
+\fBdatacarriersize\fR
+.IP
+Maximum size of data in data carrier transactions we relay and mine
+(default: 83)
+.HP
+\fBminrelaytxfee=\fR<amt>
+.IP
+Fees (in BTC/kvB) smaller than this are considered zero fee for
+relaying, mining and transaction creation (default: 0.00001)
+.HP
+\fBwhitelistforcerelay\fR
+.IP
+Add 'forcerelay' permission to whitelisted inbound peers with default
+permissions. This will relay transactions even if the
+transactions were already in the mempool. (default: 0)
+.HP
+\fBwhitelistrelay\fR
+.IP
+Add 'relay' permission to whitelisted inbound peers with default
+permissions. This will accept relayed transactions even when not
+relaying transactions (default: 1)
+.PP
+Block creation options:
+.HP
+\fBblockmaxweight=\fR<n>
+.IP
+Set maximum BIP141 block weight (default: 3996000)
+.HP
+\fBblockmintxfee=\fR<amt>
+.IP
+Set lowest fee rate (in BTC/kvB) for transactions to be included in
+block creation. (default: 0.00001)
+.PP
+RPC server options:
+.HP
+\fBrest\fR
+.IP
+Accept public REST requests (default: 0)
+.HP
+\fBrpcallowip=\fR<ip>
+.IP
+Allow JSONRPC connections from specified source. Valid for <ip> are a
+single IP (e.g. 1.2.3.4), a network/netmask (e.g.
+1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This
+option can be specified multiple times
+.HP
+\fBrpcauth=\fR<userpw>
+.IP
+Username and HMACSHA256 hashed password for JSONRPC connections. The
+field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
+canonical python script is included in share/rpcauth. The client
+then connects normally using the
+rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
+option can be specified multiple times
+.HP
+\fBrpcbind=\fR<addr>[:port]
+.IP
+Bind to given address to listen for JSONRPC connections. Do not expose
+the RPC server to untrusted networks such as the public internet!
+This option is ignored unless \fBrpcallowip\fR is also passed. Port is
+optional and overrides \fBrpcport\fR. Use [host]:port notation for
+IPv6. This option can be specified multiple times (default:
+127.0.0.1 and ::1 i.e., localhost)
+.HP
+\fBrpccookiefile=\fR<loc>
+.IP
+Location of the auth cookie. Relative paths will be prefixed by a
+netspecific datadir location. (default: data dir)
+.HP
+\fBrpcpassword=\fR<pw>
+.IP
+Password for JSONRPC connections
+.HP
+\fBrpcport=\fR<port>
+.IP
+Listen for JSONRPC connections on <port> (default: 8332, testnet:
+18332, signet: 38332, regtest: 18443)
+.HP
+\fBrpcserialversion\fR
+.IP
+Sets the serialization of raw transaction or block hex returned in
+nonverbose mode, nonsegwit(0) or segwit(1) (default: 1)
+.HP
+\fBrpcthreads=\fR<n>
+.IP
+Set the number of threads to service RPC calls (default: 4)
+.HP
+\fBrpcuser=\fR<user>
+.IP
+Username for JSONRPC connections
+.HP
+\fBrpcwhitelist=\fR<whitelist>
+.IP
+Set a whitelist to filter incoming RPC calls for a specific user. The
+field <whitelist> comes in the format: <USERNAME>:<rpc 1>,<rpc
+2>,...,<rpc n>. If multiple whitelists are set for a given user,
+they are setintersected. See \fBrpcwhitelistdefault\fR documentation
+for information on default whitelist behavior.
+.HP
+\fBrpcwhitelistdefault\fR
+.IP
+Sets default behavior for rpc whitelisting. Unless rpcwhitelistdefault
+is set to 0, if any \fBrpcwhitelist\fR is set, the rpc server acts as
+if all rpc users are subject to emptyunlessotherwisespecified
+whitelists. If rpcwhitelistdefault is set to 1 and no
+\fBrpcwhitelist\fR is set, rpc server acts as if all rpc users are
+subject to empty whitelists.
+.HP
+\fBserver\fR
+.IP
+Accept command line and JSONRPC commands