Merge #20414: doc: Remove generated manual pages from master branch

daf1ebf0b1c2020169d75fc52c3be87207693a04 doc: Remove generated manual pages from master branch (Wladimir J. van der Laan)

Pull request description:

  Replace the generated manual pages on the master branch with placeholders with instructions. The master branch is too much in flux for anything generated from command output to be kept up to date, and having pages from versions ago looks silly.

  We can't remove them completely because `make dist` relies on the files being present.

  Resolves #20062.

ACKs for top commit:
  MarcoFalke:
    review ACK daf1ebf0b1c2020169d75fc52c3be87207693a04
  RiccardoMasutti:
    ACK daf1ebf

Tree-SHA512: fdd0bb777ddf66c663e4f6b00d206b3f6283ae89028e00b38d16e68a224a781e9245a25edf6f3326f9252ae2ef7c2950c591667c56d4e9d10a16fc50a6c358f4

5 files changed, 15 insertions, 1477 deletions

diff --git a/doc/man/bitcoin-cli.1 b/doc/man/bitcoin-cli.1
index 129651d8e9..588ae81fce 100644
--- a/doc/man/bitcoin-cli.1
+++ b/doc/man/bitcoin-cli.1
@@ -1,115 +1,5 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.6.
-.TH BITCOIN-CLI "1" "February 2019" "bitcoin-cli v0.17.99.0" "User Commands"
+.TH BITCOIN-CLI "1"
 .SH NAME
-bitcoin-cli \- manual page for bitcoin-cli v0.17.99.0
-.SH SYNOPSIS
-.B bitcoin-cli
-[\fI\,options\/\fR] \fI\,<command> \/\fR[\fI\,params\/\fR]  \fI\,Send command to Bitcoin Core\/\fR
-.br
-.B bitcoin-cli
-[\fI\,options\/\fR] \fI\,-named <command> \/\fR[\fI\,name=value\/\fR]...  \fI\,Send command to Bitcoin Core (with named arguments)\/\fR
-.br
-.B bitcoin-cli
-[\fI\,options\/\fR] \fI\,help                List commands\/\fR
-.br
-.B bitcoin-cli
-[\fI\,options\/\fR] \fI\,help <command>      Get help for a command\/\fR
-.SH DESCRIPTION
-Bitcoin Core RPC client version v0.17.99.0
-.SH OPTIONS
-.HP
-\-?
-.IP
-Print this help message and exit
-.HP
-\fB\-conf=\fR<file>
-.IP
-Specify configuration file. Relative paths will be prefixed by datadir
-location. (default: bitcoin.conf)
-.HP
-\fB\-datadir=\fR<dir>
-.IP
-Specify data directory
-.HP
-\fB\-getinfo\fR
-.IP
-Get general information from the remote server. Note that unlike
-server\-side RPC calls, the results of \fB\-getinfo\fR is the result of
-multiple non\-atomic requests. Some entries in the result may
-represent results from different states (e.g. wallet balance may
-be as of a different block from the chain state reported)
-.HP
-\fB\-named\fR
-.IP
-Pass named instead of positional arguments (default: false)
-.HP
-\fB\-rpcclienttimeout=\fR<n>
-.IP
-Timeout in seconds during HTTP requests, or 0 for no timeout. (default:
-900)
-.HP
-\fB\-rpcconnect=\fR<ip>
-.IP
-Send commands to node running on <ip> (default: 127.0.0.1)
-.HP
-\fB\-rpccookiefile=\fR<loc>
-.IP
-Location of the auth cookie. Relative paths will be prefixed by a
-net\-specific datadir location. (default: data dir)
-.HP
-\fB\-rpcpassword=\fR<pw>
-.IP
-Password for JSON\-RPC connections
-.HP
-\fB\-rpcport=\fR<port>
-.IP
-Connect to JSON\-RPC on <port> (default: 8332, testnet: 18332, regtest:
-18443)
-.HP
-\fB\-rpcuser=\fR<user>
-.IP
-Username for JSON\-RPC connections
-.HP
-\fB\-rpcwait\fR
-.IP
-Wait for RPC server to start
-.HP
-\fB\-rpcwallet=\fR<walletname>
-.IP
-Send RPC for non\-default wallet on RPC server (needs to exactly match
-corresponding \fB\-wallet\fR option passed to bitcoind). This changes
-the RPC endpoint used, e.g.
-http://127.0.0.1:8332/wallet/<walletname>
-.HP
-\fB\-stdin\fR
-.IP
-Read extra arguments from standard input, one per line until EOF/Ctrl\-D
-(recommended for sensitive information such as passphrases). When
-combined with \fB\-stdinrpcpass\fR, the first line from standard input
-is used for the RPC password.
-.HP
-\fB\-stdinrpcpass\fR
-.IP
-Read RPC password from standard input as a single line. When combined
-with \fB\-stdin\fR, the first line from standard input is used for the
-RPC password.
-.HP
-\fB\-version\fR
-.IP
-Print version and exit
-.PP
-Chain selection options:
-.HP
-\fB\-testnet\fR
-.IP
-Use the test chain
-.SH COPYRIGHT
-Copyright (C) 2009-2019 The Bitcoin Core developers
+bitcoin-cli \- manual page for bitcoin-cli
 
-Please contribute if you find Bitcoin Core useful. Visit
-<https://bitcoincore.org> for further information about the software.
-The source code is available from <https://github.com/bitcoin/bitcoin>.
-
-This is experimental software.
-Distributed under the MIT software license, see the accompanying file COPYING
-or <https://opensource.org/licenses/MIT>
+This is a placefolder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
diff --git a/doc/man/bitcoin-qt.1 b/doc/man/bitcoin-qt.1
index f68be21e8d..9c75e9fe54 100644
--- a/doc/man/bitcoin-qt.1
+++ b/doc/man/bitcoin-qt.1
@@ -1,610 +1,5 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.6.
-.TH BITCOIN-QT "1" "February 2019" "bitcoin-qt v0.17.99.0" "User Commands"
+.TH BITCOIN-QT "1"
 .SH NAME
-bitcoin-qt \- manual page for bitcoin-qt v0.17.99.0
-.SH SYNOPSIS
-.B bitcoin-qt
-[\fI\,command-line options\/\fR]
-.SH DESCRIPTION
-Bitcoin Core version v0.17.99.0 (64\-bit)
-.SH OPTIONS
-.HP
-\-?
-.IP
-Print this help message and exit
-.HP
-\fB\-alertnotify=\fR<cmd>
-.IP
-Execute command when a relevant alert is received or we see a really
-long fork (%s in cmd is replaced by message)
-.HP
-\fB\-assumevalid=\fR<hex>
-.IP
-If this block is in the chain assume that it and its ancestors are valid
-and potentially skip their script verification (0 to verify all,
-default:
-0000000000000000002e63058c023a9a1de233554f28c7b21380b6c9003f36a8,
-testnet:
-0000000000000037a8cd3e06cd5edbfe9dd1dbcc5dacab279376ef7cfc2b4c75)
-.HP
-\fB\-blocknotify=\fR<cmd>
-.IP
-Execute command when the best block changes (%s in cmd is replaced by
-block hash)
-.HP
-\fB\-blockreconstructionextratxn=\fR<n>
-.IP
-Extra transactions to keep in memory for compact block reconstructions
-(default: 100)
-.HP
-\fB\-blocksdir=\fR<dir>
-.IP
-Specify blocks directory (default: <datadir>/blocks)
-.HP
-\fB\-conf=\fR<file>
-.IP
-Specify configuration file. Relative paths will be prefixed by datadir
-location. (default: bitcoin.conf)
-.HP
-\fB\-daemon\fR
-.IP
-Run in the background as a daemon and accept commands
-.HP
-\fB\-datadir=\fR<dir>
-.IP
-Specify data directory
-.HP
-\fB\-dbcache=\fR<n>
-.IP
-Set database cache size in MiB (4 to 16384, default: 450)
-.HP
-\fB\-debuglogfile=\fR<file>
-.IP
-Specify location of debug log file. Relative paths will be prefixed by a
-net\-specific datadir location. (\fB\-nodebuglogfile\fR to disable;
-default: debug.log)
-.HP
-\fB\-includeconf=\fR<file>
-.IP
-Specify additional configuration file, relative to the \fB\-datadir\fR path
-(only useable from configuration file, not command line)
-.HP
-\fB\-loadblock=\fR<file>
-.IP
-Imports blocks from external blk000??.dat file on startup
-.HP
-\fB\-maxmempool=\fR<n>
-.IP
-Keep the transaction memory pool below <n> megabytes (default: 300)
-.HP
-\fB\-maxorphantx=\fR<n>
-.IP
-Keep at most <n> unconnectable transactions in memory (default: 100)
-.HP
-\fB\-mempoolexpiry=\fR<n>
-.IP
-Do not keep transactions in the mempool longer than <n> hours (default:
-336)
-.HP
-\fB\-par=\fR<n>
-.IP
-Set the number of script verification threads (\fB\-8\fR to 16, 0 = auto, <0 =
-leave that many cores free, default: 0)
-.HP
-\fB\-persistmempool\fR
-.IP
-Whether to save the mempool on shutdown and load on restart (default: 1)
-.HP
-\fB\-pid=\fR<file>
-.IP
-Specify pid file. Relative paths will be prefixed by a net\-specific
-datadir location. (default: bitcoind.pid)
-.HP
-\fB\-prune=\fR<n>
-.IP
-Reduce storage requirements by enabling pruning (deleting) of old
-blocks. This allows the pruneblockchain RPC to be called to
-delete specific blocks, and enables automatic pruning of old
-blocks if a target size in MiB is provided. This mode is
-incompatible with \fB\-txindex\fR and \fB\-rescan\fR. Warning: Reverting this
-setting requires re\-downloading the entire blockchain. (default:
-0 = disable pruning blocks, 1 = allow manual pruning via RPC,
->=550 = automatically prune block files to stay under the
-specified target size in MiB)
-.HP
-\fB\-reindex\fR
-.IP
-Rebuild chain state and block index from the blk*.dat files on disk
-.HP
-\fB\-reindex\-chainstate\fR
-.IP
-Rebuild chain state from the currently indexed blocks. When in pruning
-mode or if blocks on disk might be corrupted, use full \fB\-reindex\fR
-instead.
-.HP
-\fB\-sysperms\fR
-.IP
-Create new files with system default permissions, instead of umask 077
-(only effective with disabled wallet functionality)
-.HP
-\fB\-txindex\fR
-.IP
-Maintain a full transaction index, used by the getrawtransaction rpc
-call (default: 0)
-.HP
-\fB\-version\fR
-.IP
-Print version and exit
-.PP
-Connection options:
-.HP
-\fB\-addnode=\fR<ip>
-.IP
-Add a node to connect to and attempt to keep the connection open (see
-the `addnode` RPC command help for more info). This option can be
-specified multiple times to add multiple nodes.
-.HP
-\fB\-banscore=\fR<n>
-.IP
-Threshold for disconnecting misbehaving peers (default: 100)
-.HP
-\fB\-bantime=\fR<n>
-.IP
-Number of seconds to keep misbehaving peers from reconnecting (default:
-86400)
-.HP
-\fB\-bind=\fR<addr>
-.IP
-Bind to given address and always listen on it. Use [host]:port notation
-for IPv6
-.HP
-\fB\-connect=\fR<ip>
-.IP
-Connect only to the specified node; \fB\-noconnect\fR disables automatic
-connections (the rules for this peer are the same as for
-\fB\-addnode\fR). This option can be specified multiple times to connect
-to multiple nodes.
-.HP
-\fB\-discover\fR
-.IP
-Discover own IP addresses (default: 1 when listening and no \fB\-externalip\fR
-or \fB\-proxy\fR)
-.HP
-\fB\-dns\fR
-.IP
-Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (default: 1)
-.HP
-\fB\-dnsseed\fR
-.IP
-Query for peer addresses via DNS lookup, if low on addresses (default: 1
-unless \fB\-connect\fR used)
-.HP
-\fB\-externalip=\fR<ip>
-.IP
-Specify your own public address
-.HP
-\fB\-forcednsseed\fR
-.IP
-Always query for peer addresses via DNS lookup (default: 0)
-.HP
-\fB\-listen\fR
-.IP
-Accept connections from outside (default: 1 if no \fB\-proxy\fR or \fB\-connect\fR)
-.HP
-\fB\-listenonion\fR
-.IP
-Automatically create Tor hidden service (default: 1)
-.HP
-\fB\-maxconnections=\fR<n>
-.IP
-Maintain at most <n> connections to peers (default: 125)
-.HP
-\fB\-maxreceivebuffer=\fR<n>
-.IP
-Maximum per\-connection receive buffer, <n>*1000 bytes (default: 5000)
-.HP
-\fB\-maxsendbuffer=\fR<n>
-.IP
-Maximum per\-connection send buffer, <n>*1000 bytes (default: 1000)
-.HP
-\fB\-maxtimeadjustment\fR
-.IP
-Maximum allowed median peer time offset adjustment. Local perspective of
-time may be influenced by peers forward or backward by this
-amount. (default: 4200 seconds)
-.HP
-\fB\-maxuploadtarget=\fR<n>
-.IP
-Tries to keep outbound traffic under the given target (in MiB per 24h),
-0 = no limit (default: 0)
-.HP
-\fB\-onion=\fR<ip:port>
-.IP
-Use separate SOCKS5 proxy to reach peers via Tor hidden services, set
-\fB\-noonion\fR to disable (default: \fB\-proxy\fR)
-.HP
-\fB\-onlynet=\fR<net>
-.IP
-Make outgoing connections only through network <net> (ipv4, ipv6 or
-onion). Incoming connections are not affected by this option.
-This option can be specified multiple times to allow multiple
-networks.
-.HP
-\fB\-peerbloomfilters\fR
-.IP
-Support filtering of blocks and transaction with bloom filters (default:
-1)
-.HP
-\fB\-permitbaremultisig\fR
-.IP
-Relay non\-P2SH multisig (default: 1)
-.HP
-\fB\-port=\fR<port>
-.IP
-Listen for connections on <port> (default: 8333, testnet: 18333,
-regtest: 18444)
-.HP
-\fB\-proxy=\fR<ip:port>
-.IP
-Connect through SOCKS5 proxy, set \fB\-noproxy\fR to disable (default:
-disabled)
-.HP
-\fB\-proxyrandomize\fR
-.IP
-Randomize credentials for every proxy connection. This enables Tor
-stream isolation (default: 1)
-.HP
-\fB\-seednode=\fR<ip>
-.IP
-Connect to a node to retrieve peer addresses, and disconnect. This
-option can be specified multiple times to connect to multiple
-nodes.
-.HP
-\fB\-timeout=\fR<n>
-.IP
-Specify connection timeout in milliseconds (minimum: 1, default: 5000)
-.HP
-\fB\-torcontrol=\fR<ip>:<port>
-.IP
-Tor control port to use if onion listening enabled (default:
-127.0.0.1:9051)
-.HP
-\fB\-torpassword=\fR<pass>
-.IP
-Tor control port password (default: empty)
-.HP
-\fB\-upnp\fR
-.IP
-Use UPnP to map the listening port (default: 0)
-.HP
-\fB\-whitebind=\fR<addr>
-.IP
-Bind to given address and whitelist peers connecting to it. Use
-[host]:port notation for IPv6
-.HP
-\fB\-whitelist=\fR<IP address or network>
-.IP
-Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or
-CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple
-times. Whitelisted peers cannot be DoS banned and their
-transactions are always relayed, even if they are already in the
-mempool, useful e.g. for a gateway
-.PP
-Wallet options:
-.HP
-\fB\-addresstype\fR
-.IP
-What type of addresses to use ("legacy", "p2sh\-segwit", or "bech32",
-default: "p2sh\-segwit")
-.HP
-\fB\-avoidpartialspends\fR
-.IP
-Group outputs by address, selecting all or none, instead of selecting on
-a per\-output basis. Privacy is improved as an address is only
-used once (unless someone sends to it after spending from it),
-but may result in slightly higher fees as suboptimal coin
-selection may result due to the added limitation (default: 0)
-.HP
-\fB\-changetype\fR
-.IP
-What type of change to use ("legacy", "p2sh\-segwit", or "bech32").
-Default is same as \fB\-addresstype\fR, except when
-\fB\-addresstype\fR=\fI\,p2sh\-segwit\/\fR a native segwit output is used when
-sending to a native segwit address)
-.HP
-\fB\-disablewallet\fR
-.IP
-Do not load the wallet and disable wallet RPC calls
-.HP
-\fB\-discardfee=\fR<amt>
-.IP
-The fee rate (in BTC/kB) that indicates your tolerance for discarding
-change by adding it to the fee (default: 0.0001). Note: An output
-is discarded if it is dust at this rate, but we will always
-discard up to the dust relay fee and a discard fee above that is
-limited by the fee estimate for the longest target
-.HP
-\fB\-fallbackfee=\fR<amt>
-.IP
-A fee rate (in BTC/kB) that will be used when fee estimation has
-insufficient data (default: 0.0002)
-.HP
-\fB\-keypool=\fR<n>
-.IP
-Set key pool size to <n> (default: 1000)
-.HP
-\fB\-mintxfee=\fR<amt>
-.IP
-Fees (in BTC/kB) smaller than this are considered zero fee for
-transaction creation (default: 0.00001)
-.HP
-\fB\-paytxfee=\fR<amt>
-.IP
-Fee (in BTC/kB) to add to transactions you send (default: 0.00)
-.HP
-\fB\-rescan\fR
-.IP
-Rescan the block chain for missing wallet transactions on startup
-.HP
-\fB\-salvagewallet\fR
-.IP
-Attempt to recover private keys from a corrupt wallet on startup
-.HP
-\fB\-spendzeroconfchange\fR
-.IP
-Spend unconfirmed change when sending transactions (default: 1)
-.HP
-\fB\-txconfirmtarget=\fR<n>
-.IP
-If paytxfee is not set, include enough fee so transactions begin
-confirmation on average within n blocks (default: 6)
-.HP
-\fB\-upgradewallet\fR
-.IP
-Upgrade wallet to latest format on startup
-.HP
-\fB\-wallet=\fR<path>
-.IP
-Specify wallet database path. Can be specified multiple times to load
-multiple wallets. Path is interpreted relative to <walletdir> if
-it is not absolute, and will be created if it does not exist (as
-a directory containing a wallet.dat file and log files). For
-backwards compatibility this will also accept names of existing
-data files in <walletdir>.)
-.HP
-\fB\-walletbroadcast\fR
-.IP
-Make the wallet broadcast transactions (default: 1)
-.HP
-\fB\-walletdir=\fR<dir>
-.IP
-Specify directory to hold wallets (default: <datadir>/wallets if it
-exists, otherwise <datadir>)
-.HP
-\fB\-walletnotify=\fR<cmd>
-.IP
-Execute command when a wallet transaction changes (%s in cmd is replaced
-by TxID)
-.HP
-\fB\-walletrbf\fR
-.IP
-Send transactions with full\-RBF opt\-in enabled (RPC only, default: 0)
-.HP
-\fB\-zapwallettxes=\fR<mode>
-.IP
-Delete all wallet transactions and only recover those parts of the
-blockchain through \fB\-rescan\fR on startup (1 = keep tx meta data e.g.
-payment request information, 2 = drop tx meta data)
-.PP
-ZeroMQ notification options:
-.HP
-\fB\-zmqpubhashblock=\fR<address>
-.IP
-Enable publish hash block in <address>
-.HP
-\fB\-zmqpubhashtx=\fR<address>
-.IP
-Enable publish hash transaction in <address>
-.HP
-\fB\-zmqpubrawblock=\fR<address>
-.IP
-Enable publish raw block in <address>
-.HP
-\fB\-zmqpubrawtx=\fR<address>
-.IP
-Enable publish raw transaction in <address>
-.PP
-Debugging/Testing options:
-.HP
-\fB\-debug=\fR<category>
-.IP
-Output debugging information (default: \fB\-nodebug\fR, supplying <category> is
-optional). If <category> is not supplied or if <category> = 1,
-output all debugging information. <category> can be: net, tor,
-mempool, http, bench, zmq, db, rpc, estimatefee, addrman,
-selectcoins, reindex, cmpctblock, rand, prune, proxy, mempoolrej,
-libevent, coindb, qt, leveldb.
-.HP
-\fB\-debugexclude=\fR<category>
-.IP
-Exclude debugging information for a category. Can be used in conjunction
-with \fB\-debug\fR=\fI\,1\/\fR to output debug logs for all categories except one
-or more specified categories.
-.HP
-\fB\-help\-debug\fR
-.IP
-Print help message with debugging options and exit
-.HP
-\fB\-logips\fR
-.IP
-Include IP addresses in debug output (default: 0)
-.HP
-\fB\-logtimestamps\fR
-.IP
-Prepend debug output with timestamp (default: 1)
-.HP
-\fB\-maxtxfee=\fR<amt>
-.IP
-Maximum total fees (in BTC) to use in a single wallet transaction or raw
-transaction; setting this too low may abort large transactions
-(default: 0.10)
-.HP
-\fB\-printtoconsole\fR
-.IP
-Send trace/debug info to console (default: 1 when no \fB\-daemon\fR. To disable
-logging to file, set \fB\-nodebuglogfile\fR)
-.HP
-\fB\-shrinkdebugfile\fR
-.IP
-Shrink debug.log file on client startup (default: 1 when no \fB\-debug\fR)
-.HP
-\fB\-uacomment=\fR<cmt>
-.IP
-Append comment to the user agent string
-.PP
-Chain selection options:
-.HP
-\fB\-testnet\fR
-.IP
-Use the test chain
-.PP
-Node relay options:
-.HP
-\fB\-bytespersigop\fR
-.IP
-Equivalent bytes per sigop in transactions for relay and mining
-(default: 20)
-.HP
-\fB\-datacarrier\fR
-.IP
-Relay and mine data carrier transactions (default: 1)
-.HP
-\fB\-datacarriersize\fR
-.IP
-Maximum size of data in data carrier transactions we relay and mine
-(default: 83)
-.HP
-.HP
-\fB\-minrelaytxfee=\fR<amt>
-.IP
-Fees (in BTC/kB) smaller than this are considered zero fee for relaying,
-mining and transaction creation (default: 0.00001)
-.HP
-\fB\-whitelistforcerelay\fR
-.IP
-Force relay of transactions from whitelisted peers even if they violate
-local relay policy (default: 0)
-.HP
-\fB\-whitelistrelay\fR
-.IP
-Accept relayed transactions received from whitelisted peers even when
-not relaying transactions (default: 1)
-.PP
-Block creation options:
-.HP
-\fB\-blockmaxweight=\fR<n>
-.IP
-Set maximum BIP141 block weight (default: 3996000)
-.HP
-\fB\-blockmintxfee=\fR<amt>
-.IP
-Set lowest fee rate (in BTC/kB) for transactions to be included in block
-creation. (default: 0.00001)
-.PP
-RPC server options:
-.HP
-\fB\-rest\fR
-.IP
-Accept public REST requests (default: 0)
-.HP
-\fB\-rpcallowip=\fR<ip>
-.IP
-Allow JSON\-RPC connections from specified source. Valid for <ip> are a
-single IP (e.g. 1.2.3.4), a network/netmask (e.g.
-1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This
-option can be specified multiple times
-.HP
-\fB\-rpcauth=\fR<userpw>
-.IP
-Username and HMAC\-SHA\-256 hashed password for JSON\-RPC connections. The
-field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
-canonical python script is included in share/rpcauth. The client
-then connects normally using the
-rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
-option can be specified multiple times
-.HP
-\fB\-rpcbind=\fR<addr>[:port]
-.IP
-Bind to given address to listen for JSON\-RPC connections. Do not expose
-the RPC server to untrusted networks such as the public internet!
-This option is ignored unless \fB\-rpcallowip\fR is also passed. Port is
-optional and overrides \fB\-rpcport\fR. Use [host]:port notation for
-IPv6. This option can be specified multiple times (default:
-127.0.0.1 and ::1 i.e., localhost)
-.HP
-\fB\-rpccookiefile=\fR<loc>
-.IP
-Location of the auth cookie. Relative paths will be prefixed by a
-net\-specific datadir location. (default: data dir)
-.HP
-\fB\-rpcpassword=\fR<pw>
-.IP
-Password for JSON\-RPC connections
-.HP
-\fB\-rpcport=\fR<port>
-.IP
-Listen for JSON\-RPC connections on <port> (default: 8332, testnet:
-18332, regtest: 18443)
-.HP
-\fB\-rpcserialversion\fR
-.IP
-Sets the serialization of raw transaction or block hex returned in
-non\-verbose mode, non\-segwit(0) or segwit(1) (default: 1)
-.HP
-\fB\-rpcthreads=\fR<n>
-.IP
-Set the number of threads to service RPC calls (default: 4)
-.HP
-\fB\-rpcuser=\fR<user>
-.IP
-Username for JSON\-RPC connections
-.HP
-\fB\-server\fR
-.IP
-Accept command line and JSON\-RPC commands
-.PP
-UI Options:
-.HP
-\fB\-choosedatadir\fR
-.IP
-Choose data directory on startup (default: 0)
-.HP
-\fB\-lang=\fR<lang>
-.IP
-Set language, for example "de_DE" (default: system locale)
-.HP
-\fB\-min\fR
-.IP
-Start minimized
-.HP
-\fB\-resetguisettings\fR
-.IP
-Reset all settings changed in the GUI
-.HP
-\fB\-rootcertificates=\fR<file>
-.IP
-Set SSL root certificates for payment request (default: \fB\-system\-\fR)
-.HP
-\fB\-splash\fR
-.IP
-Show splash screen on startup (default: 1)
-.SH COPYRIGHT
-Copyright (C) 2009-2019 The Bitcoin Core developers
+bitcoin-qt \- manual page for bitcoin-qt
 
-Please contribute if you find Bitcoin Core useful. Visit
-<https://bitcoincore.org> for further information about the software.
-The source code is available from <https://github.com/bitcoin/bitcoin>.
-
-This is experimental software.
-Distributed under the MIT software license, see the accompanying file COPYING
-or <https://opensource.org/licenses/MIT>
+This is a placefolder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
diff --git a/doc/man/bitcoin-tx.1 b/doc/man/bitcoin-tx.1
index b4c7698896..148a5890b0 100644
--- a/doc/man/bitcoin-tx.1
+++ b/doc/man/bitcoin-tx.1
@@ -1,116 +1,5 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.6.
-.TH BITCOIN-TX "1" "February 2019" "bitcoin-tx v0.17.99.0" "User Commands"
+.TH BITCOIN-TX "1"
 .SH NAME
-bitcoin-tx \- manual page for bitcoin-tx v0.17.99.0
-.SH SYNOPSIS
-.B bitcoin-tx
-[\fI\,options\/\fR] \fI\,<hex-tx> \/\fR[\fI\,commands\/\fR]  \fI\,Update hex-encoded bitcoin transaction\/\fR
-.br
-.B bitcoin-tx
-[\fI\,options\/\fR] \fI\,-create \/\fR[\fI\,commands\/\fR]   \fI\,Create hex-encoded bitcoin transaction\/\fR
-.SH DESCRIPTION
-Bitcoin Core bitcoin\-tx utility version v0.17.99.0
-.SH OPTIONS
-.HP
-\-?
-.IP
-Print this help message and exit
-.HP
-\fB\-create\fR
-.IP
-Create new, empty TX.
-.HP
-\fB\-json\fR
-.IP
-Select JSON output
-.HP
-\fB\-txid\fR
-.IP
-Output only the hex\-encoded transaction id of the resultant transaction.
-.PP
-Chain selection options:
-.HP
-\fB\-testnet\fR
-.IP
-Use the test chain
-.PP
-Commands:
-.IP
-delin=N
-.IP
-Delete input N from TX
-.IP
-delout=N
-.IP
-Delete output N from TX
-.IP
-in=TXID:VOUT(:SEQUENCE_NUMBER)
-.IP
-Add input to TX
-.IP
-locktime=N
-.IP
-Set TX lock time to N
-.IP
-nversion=N
-.IP
-Set TX version to N
-.IP
-outaddr=VALUE:ADDRESS
-.IP
-Add address\-based output to TX
-.IP
-outdata=[VALUE:]DATA
-.IP
-Add data\-based output to TX
-.IP
-outmultisig=VALUE:REQUIRED:PUBKEYS:PUBKEY1:PUBKEY2:....[:FLAGS]
-.IP
-Add Pay To n\-of\-m Multi\-sig output to TX. n = REQUIRED, m = PUBKEYS.
-Optionally add the "W" flag to produce a
-pay\-to\-witness\-script\-hash output. Optionally add the "S" flag to
-wrap the output in a pay\-to\-script\-hash.
-.IP
-outpubkey=VALUE:PUBKEY[:FLAGS]
-.IP
-Add pay\-to\-pubkey output to TX. Optionally add the "W" flag to produce a
-pay\-to\-witness\-pubkey\-hash output. Optionally add the "S" flag to
-wrap the output in a pay\-to\-script\-hash.
-.IP
-outscript=VALUE:SCRIPT[:FLAGS]
-.IP
-Add raw script output to TX. Optionally add the "W" flag to produce a
-pay\-to\-witness\-script\-hash output. Optionally add the "S" flag to
-wrap the output in a pay\-to\-script\-hash.
-.IP
-replaceable(=N)
-.IP
-Set RBF opt\-in sequence number for input N (if not provided, opt\-in all
-available inputs)
-.IP
-sign=SIGHASH\-FLAGS
-.IP
-Add zero or more signatures to transaction. This command requires JSON
-registers:prevtxs=JSON object, privatekeys=JSON object. See
-signrawtransactionwithkey docs for format of sighash flags, JSON
-objects.
-.PP
-Register Commands:
-.IP
-load=NAME:FILENAME
-.IP
-Load JSON file FILENAME into register NAME
-.IP
-set=NAME:JSON\-STRING
-.IP
-Set register NAME to given JSON\-STRING
-.SH COPYRIGHT
-Copyright (C) 2009-2019 The Bitcoin Core developers
+bitcoin-tx \- manual page for bitcoin-tx
 
-Please contribute if you find Bitcoin Core useful. Visit
-<https://bitcoincore.org> for further information about the software.
-The source code is available from <https://github.com/bitcoin/bitcoin>.
-
-This is experimental software.
-Distributed under the MIT software license, see the accompanying file COPYING
-or <https://opensource.org/licenses/MIT>
+This is a placefolder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
diff --git a/doc/man/bitcoin-wallet.1 b/doc/man/bitcoin-wallet.1
index aadea09a2b..69133b33f7 100644
--- a/doc/man/bitcoin-wallet.1
+++ b/doc/man/bitcoin-wallet.1
@@ -1,63 +1,5 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.6.
-.TH BITCOIN-WALLET "1" "February 2019" "bitcoin-wallet v0.17.99.0" "User Commands"
+.TH BITCOIN-WALLET "1"
 .SH NAME
-bitcoin-wallet \- manual page for bitcoin-wallet v0.17.99.0
-.SH DESCRIPTION
-Bitcoin Core bitcoin\-wallet version v0.17.99.0
-.PP
-wallet\-tool is an offline tool for creating and interacting with Bitcoin Core wallet files.
-By default wallet\-tool will act on wallets in the default mainnet wallet directory in the datadir.
-To change the target wallet, use the \fB\-datadir\fR, \fB\-wallet\fR and \fB\-testnet\fR/\-regtest arguments.
-.SS "Usage:"
-.IP
-bitcoin\-wallet [options] <command>
-.SH OPTIONS
-.HP
-\-?
-.IP
-Print this help message and exit
-.HP
-\fB\-datadir=\fR<dir>
-.IP
-Specify data directory
-.HP
-\fB\-wallet=\fR<wallet\-name>
-.IP
-Specify wallet name
-.PP
-Debugging/Testing options:
-.HP
-\fB\-debug=\fR<category>
-.IP
-Output debugging information (default: 0).
-.HP
-\fB\-printtoconsole\fR
-.IP
-Send trace/debug info to console (default: 1 when no \fB\-debug\fR is true, 0
-otherwise.
-.PP
-Chain selection options:
-.HP
-\fB\-testnet\fR
-.IP
-Use the test chain
-.PP
-Commands:
-.IP
-create
-.IP
-Create new wallet file
-.IP
-info
-.IP
-Get wallet info
-.SH COPYRIGHT
-Copyright (C) 2009-2019 The Bitcoin Core developers
+bitcoin-wallet \- manual page for bitcoin-wallet
 
-Please contribute if you find Bitcoin Core useful. Visit
-<https://bitcoincore.org> for further information about the software.
-The source code is available from <https://github.com/bitcoin/bitcoin>.
-
-This is experimental software.
-Distributed under the MIT software license, see the accompanying file COPYING
-or <https://opensource.org/licenses/MIT>
+This is a placefolder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.
diff --git a/doc/man/bitcoind.1 b/doc/man/bitcoind.1
index 211ba10285..de338182ff 100644
--- a/doc/man/bitcoind.1
+++ b/doc/man/bitcoind.1
@@ -1,583 +1,5 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.6.
-.TH BITCOIND "1" "February 2019" "bitcoind v0.17.99.0" "User Commands"
+.TH BITCOIND "1"
 .SH NAME
-bitcoind \- manual page for bitcoind v0.17.99.0
-.SH SYNOPSIS
-.B bitcoind
-[\fI\,options\/\fR]                     \fI\,Start Bitcoin Core Daemon\/\fR
-.SH DESCRIPTION
-Bitcoin Core Daemon version v0.17.99.0
-.SH OPTIONS
-.HP
-\-?
-.IP
-Print this help message and exit
-.HP
-\fB\-alertnotify=\fR<cmd>
-.IP
-Execute command when a relevant alert is received or we see a really
-long fork (%s in cmd is replaced by message)
-.HP
-\fB\-assumevalid=\fR<hex>
-.IP
-If this block is in the chain assume that it and its ancestors are valid
-and potentially skip their script verification (0 to verify all,
-default:
-0000000000000000002e63058c023a9a1de233554f28c7b21380b6c9003f36a8,
-testnet:
-0000000000000037a8cd3e06cd5edbfe9dd1dbcc5dacab279376ef7cfc2b4c75)
-.HP
-\fB\-blocknotify=\fR<cmd>
-.IP
-Execute command when the best block changes (%s in cmd is replaced by
-block hash)
-.HP
-\fB\-blockreconstructionextratxn=\fR<n>
-.IP
-Extra transactions to keep in memory for compact block reconstructions
-(default: 100)
-.HP
-\fB\-blocksdir=\fR<dir>
-.IP
-Specify blocks directory (default: <datadir>/blocks)
-.HP
-\fB\-conf=\fR<file>
-.IP
-Specify configuration file. Relative paths will be prefixed by datadir
-location. (default: bitcoin.conf)
-.HP
-\fB\-daemon\fR
-.IP
-Run in the background as a daemon and accept commands
-.HP
-\fB\-datadir=\fR<dir>
-.IP
-Specify data directory
-.HP
-\fB\-dbcache=\fR<n>
-.IP
-Set database cache size in MiB (4 to 16384, default: 450)
-.HP
-\fB\-debuglogfile=\fR<file>
-.IP
-Specify location of debug log file. Relative paths will be prefixed by a
-net\-specific datadir location. (\fB\-nodebuglogfile\fR to disable;
-default: debug.log)
-.HP
-\fB\-includeconf=\fR<file>
-.IP
-Specify additional configuration file, relative to the \fB\-datadir\fR path
-(only useable from configuration file, not command line)
-.HP
-\fB\-loadblock=\fR<file>
-.IP
-Imports blocks from external blk000??.dat file on startup
-.HP
-\fB\-maxmempool=\fR<n>
-.IP
-Keep the transaction memory pool below <n> megabytes (default: 300)
-.HP
-\fB\-maxorphantx=\fR<n>
-.IP
-Keep at most <n> unconnectable transactions in memory (default: 100)
-.HP
-\fB\-mempoolexpiry=\fR<n>
-.IP
-Do not keep transactions in the mempool longer than <n> hours (default:
-336)
-.HP
-\fB\-par=\fR<n>
-.IP
-Set the number of script verification threads (\fB\-8\fR to 16, 0 = auto, <0 =
-leave that many cores free, default: 0)
-.HP
-\fB\-persistmempool\fR
-.IP
-Whether to save the mempool on shutdown and load on restart (default: 1)
-.HP
-\fB\-pid=\fR<file>
-.IP
-Specify pid file. Relative paths will be prefixed by a net\-specific
-datadir location. (default: bitcoind.pid)
-.HP
-\fB\-prune=\fR<n>
-.IP
-Reduce storage requirements by enabling pruning (deleting) of old
-blocks. This allows the pruneblockchain RPC to be called to
-delete specific blocks, and enables automatic pruning of old
-blocks if a target size in MiB is provided. This mode is
-incompatible with \fB\-txindex\fR and \fB\-rescan\fR. Warning: Reverting this
-setting requires re\-downloading the entire blockchain. (default:
-0 = disable pruning blocks, 1 = allow manual pruning via RPC,
->=550 = automatically prune block files to stay under the
-specified target size in MiB)
-.HP
-\fB\-reindex\fR
-.IP
-Rebuild chain state and block index from the blk*.dat files on disk
-.HP
-\fB\-reindex\-chainstate\fR
-.IP
-Rebuild chain state from the currently indexed blocks. When in pruning
-mode or if blocks on disk might be corrupted, use full \fB\-reindex\fR
-instead.
-.HP
-\fB\-sysperms\fR
-.IP
-Create new files with system default permissions, instead of umask 077
-(only effective with disabled wallet functionality)
-.HP
-\fB\-txindex\fR
-.IP
-Maintain a full transaction index, used by the getrawtransaction rpc
-call (default: 0)
-.HP
-\fB\-version\fR
-.IP
-Print version and exit
-.PP
-Connection options:
-.HP
-\fB\-addnode=\fR<ip>
-.IP
-Add a node to connect to and attempt to keep the connection open (see
-the `addnode` RPC command help for more info). This option can be
-specified multiple times to add multiple nodes.
-.HP
-\fB\-banscore=\fR<n>
-.IP
-Threshold for disconnecting misbehaving peers (default: 100)
-.HP
-\fB\-bantime=\fR<n>
-.IP
-Number of seconds to keep misbehaving peers from reconnecting (default:
-86400)
-.HP
-\fB\-bind=\fR<addr>
-.IP
-Bind to given address and always listen on it. Use [host]:port notation
-for IPv6
-.HP
-\fB\-connect=\fR<ip>
-.IP
-Connect only to the specified node; \fB\-noconnect\fR disables automatic
-connections (the rules for this peer are the same as for
-\fB\-addnode\fR). This option can be specified multiple times to connect
-to multiple nodes.
-.HP
-\fB\-discover\fR
-.IP
-Discover own IP addresses (default: 1 when listening and no \fB\-externalip\fR
-or \fB\-proxy\fR)
-.HP
-\fB\-dns\fR
-.IP
-Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (default: 1)
-.HP
-\fB\-dnsseed\fR
-.IP
-Query for peer addresses via DNS lookup, if low on addresses (default: 1
-unless \fB\-connect\fR used)
-.HP
-\fB\-externalip=\fR<ip>
-.IP
-Specify your own public address
-.HP
-\fB\-forcednsseed\fR
-.IP
-Always query for peer addresses via DNS lookup (default: 0)
-.HP
-\fB\-listen\fR
-.IP
-Accept connections from outside (default: 1 if no \fB\-proxy\fR or \fB\-connect\fR)
-.HP
-\fB\-listenonion\fR
-.IP
-Automatically create Tor hidden service (default: 1)
-.HP
-\fB\-maxconnections=\fR<n>
-.IP
-Maintain at most <n> connections to peers (default: 125)
-.HP
-\fB\-maxreceivebuffer=\fR<n>
-.IP
-Maximum per\-connection receive buffer, <n>*1000 bytes (default: 5000)
-.HP
-\fB\-maxsendbuffer=\fR<n>
-.IP
-Maximum per\-connection send buffer, <n>*1000 bytes (default: 1000)
-.HP
-\fB\-maxtimeadjustment\fR
-.IP
-Maximum allowed median peer time offset adjustment. Local perspective of
-time may be influenced by peers forward or backward by this
-amount. (default: 4200 seconds)
-.HP
-\fB\-maxuploadtarget=\fR<n>
-.IP
-Tries to keep outbound traffic under the given target (in MiB per 24h),
-0 = no limit (default: 0)
-.HP
-\fB\-onion=\fR<ip:port>
-.IP
-Use separate SOCKS5 proxy to reach peers via Tor hidden services, set
-\fB\-noonion\fR to disable (default: \fB\-proxy\fR)
-.HP
-\fB\-onlynet=\fR<net>
-.IP
-Make outgoing connections only through network <net> (ipv4, ipv6 or
-onion). Incoming connections are not affected by this option.
-This option can be specified multiple times to allow multiple
-networks.
-.HP
-\fB\-peerbloomfilters\fR
-.IP
-Support filtering of blocks and transaction with bloom filters (default:
-1)
-.HP
-\fB\-permitbaremultisig\fR
-.IP
-Relay non\-P2SH multisig (default: 1)
-.HP
-\fB\-port=\fR<port>
-.IP
-Listen for connections on <port> (default: 8333, testnet: 18333,
-regtest: 18444)
-.HP
-\fB\-proxy=\fR<ip:port>
-.IP
-Connect through SOCKS5 proxy, set \fB\-noproxy\fR to disable (default:
-disabled)
-.HP
-\fB\-proxyrandomize\fR
-.IP
-Randomize credentials for every proxy connection. This enables Tor
-stream isolation (default: 1)
-.HP
-\fB\-seednode=\fR<ip>
-.IP
-Connect to a node to retrieve peer addresses, and disconnect. This
-option can be specified multiple times to connect to multiple
-nodes.
-.HP
-\fB\-timeout=\fR<n>
-.IP
-Specify connection timeout in milliseconds (minimum: 1, default: 5000)
-.HP
-\fB\-torcontrol=\fR<ip>:<port>
-.IP
-Tor control port to use if onion listening enabled (default:
-127.0.0.1:9051)
-.HP
-\fB\-torpassword=\fR<pass>
-.IP
-Tor control port password (default: empty)
-.HP
-\fB\-upnp\fR
-.IP
-Use UPnP to map the listening port (default: 0)
-.HP
-\fB\-whitebind=\fR<addr>
-.IP
-Bind to given address and whitelist peers connecting to it. Use
-[host]:port notation for IPv6
-.HP
-\fB\-whitelist=\fR<IP address or network>
-.IP
-Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or
-CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple
-times. Whitelisted peers cannot be DoS banned and their
-transactions are always relayed, even if they are already in the
-mempool, useful e.g. for a gateway
-.PP
-Wallet options:
-.HP
-\fB\-addresstype\fR
-.IP
-What type of addresses to use ("legacy", "p2sh\-segwit", or "bech32",
-default: "p2sh\-segwit")
-.HP
-\fB\-avoidpartialspends\fR
-.IP
-Group outputs by address, selecting all or none, instead of selecting on
-a per\-output basis. Privacy is improved as an address is only
-used once (unless someone sends to it after spending from it),
-but may result in slightly higher fees as suboptimal coin
-selection may result due to the added limitation (default: 0)
-.HP
-\fB\-changetype\fR
-.IP
-What type of change to use ("legacy", "p2sh\-segwit", or "bech32").
-Default is same as \fB\-addresstype\fR, except when
-\fB\-addresstype\fR=\fI\,p2sh\-segwit\/\fR a native segwit output is used when
-sending to a native segwit address)
-.HP
-\fB\-disablewallet\fR
-.IP
-Do not load the wallet and disable wallet RPC calls
-.HP
-\fB\-discardfee=\fR<amt>
-.IP
-The fee rate (in BTC/kB) that indicates your tolerance for discarding
-change by adding it to the fee (default: 0.0001). Note: An output
-is discarded if it is dust at this rate, but we will always
-discard up to the dust relay fee and a discard fee above that is
-limited by the fee estimate for the longest target
-.HP
-\fB\-fallbackfee=\fR<amt>
-.IP
-A fee rate (in BTC/kB) that will be used when fee estimation has
-insufficient data (default: 0.0002)
-.HP
-\fB\-keypool=\fR<n>
-.IP
-Set key pool size to <n> (default: 1000)
-.HP
-\fB\-mintxfee=\fR<amt>
-.IP
-Fees (in BTC/kB) smaller than this are considered zero fee for
-transaction creation (default: 0.00001)
-.HP
-\fB\-paytxfee=\fR<amt>
-.IP
-Fee (in BTC/kB) to add to transactions you send (default: 0.00)
-.HP
-\fB\-rescan\fR
-.IP
-Rescan the block chain for missing wallet transactions on startup
-.HP
-\fB\-salvagewallet\fR
-.IP
-Attempt to recover private keys from a corrupt wallet on startup
-.HP
-\fB\-spendzeroconfchange\fR
-.IP
-Spend unconfirmed change when sending transactions (default: 1)
-.HP
-\fB\-txconfirmtarget=\fR<n>
-.IP
-If paytxfee is not set, include enough fee so transactions begin
-confirmation on average within n blocks (default: 6)
-.HP
-\fB\-upgradewallet\fR
-.IP
-Upgrade wallet to latest format on startup
-.HP
-\fB\-wallet=\fR<path>
-.IP
-Specify wallet database path. Can be specified multiple times to load
-multiple wallets. Path is interpreted relative to <walletdir> if
-it is not absolute, and will be created if it does not exist (as
-a directory containing a wallet.dat file and log files). For
-backwards compatibility this will also accept names of existing
-data files in <walletdir>.)
-.HP
-\fB\-walletbroadcast\fR
-.IP
-Make the wallet broadcast transactions (default: 1)
-.HP
-\fB\-walletdir=\fR<dir>
-.IP
-Specify directory to hold wallets (default: <datadir>/wallets if it
-exists, otherwise <datadir>)
-.HP
-\fB\-walletnotify=\fR<cmd>
-.IP
-Execute command when a wallet transaction changes (%s in cmd is replaced
-by TxID)
-.HP
-\fB\-walletrbf\fR
-.IP
-Send transactions with full\-RBF opt\-in enabled (RPC only, default: 0)
-.HP
-\fB\-zapwallettxes=\fR<mode>
-.IP
-Delete all wallet transactions and only recover those parts of the
-blockchain through \fB\-rescan\fR on startup (1 = keep tx meta data e.g.
-payment request information, 2 = drop tx meta data)
-.PP
-ZeroMQ notification options:
-.HP
-\fB\-zmqpubhashblock=\fR<address>
-.IP
-Enable publish hash block in <address>
-.HP
-\fB\-zmqpubhashtx=\fR<address>
-.IP
-Enable publish hash transaction in <address>
-.HP
-\fB\-zmqpubrawblock=\fR<address>
-.IP
-Enable publish raw block in <address>
-.HP
-\fB\-zmqpubrawtx=\fR<address>
-.IP
-Enable publish raw transaction in <address>
-.PP
-Debugging/Testing options:
-.HP
-\fB\-debug=\fR<category>
-.IP
-Output debugging information (default: \fB\-nodebug\fR, supplying <category> is
-optional). If <category> is not supplied or if <category> = 1,
-output all debugging information. <category> can be: net, tor,
-mempool, http, bench, zmq, db, rpc, estimatefee, addrman,
-selectcoins, reindex, cmpctblock, rand, prune, proxy, mempoolrej,
-libevent, coindb, qt, leveldb.
-.HP
-\fB\-debugexclude=\fR<category>
-.IP
-Exclude debugging information for a category. Can be used in conjunction
-with \fB\-debug\fR=\fI\,1\/\fR to output debug logs for all categories except one
-or more specified categories.
-.HP
-\fB\-help\-debug\fR
-.IP
-Print help message with debugging options and exit
-.HP
-\fB\-logips\fR
-.IP
-Include IP addresses in debug output (default: 0)
-.HP
-\fB\-logtimestamps\fR
-.IP
-Prepend debug output with timestamp (default: 1)
-.HP
-\fB\-maxtxfee=\fR<amt>
-.IP
-Maximum total fees (in BTC) to use in a single wallet transaction or raw
-transaction; setting this too low may abort large transactions
-(default: 0.10)
-.HP
-\fB\-printtoconsole\fR
-.IP
-Send trace/debug info to console (default: 1 when no \fB\-daemon\fR. To disable
-logging to file, set \fB\-nodebuglogfile\fR)
-.HP
-\fB\-shrinkdebugfile\fR
-.IP
-Shrink debug.log file on client startup (default: 1 when no \fB\-debug\fR)
-.HP
-\fB\-uacomment=\fR<cmt>
-.IP
-Append comment to the user agent string
-.PP
-Chain selection options:
-.HP
-\fB\-testnet\fR
-.IP
-Use the test chain
-.PP
-Node relay options:
-.HP
-\fB\-bytespersigop\fR
-.IP
-Equivalent bytes per sigop in transactions for relay and mining
-(default: 20)
-.HP
-\fB\-datacarrier\fR
-.IP
-Relay and mine data carrier transactions (default: 1)
-.HP
-\fB\-datacarriersize\fR
-.IP
-Maximum size of data in data carrier transactions we relay and mine
-(default: 83)
-.HP
-\fB\-minrelaytxfee=\fR<amt>
-.IP
-Fees (in BTC/kB) smaller than this are considered zero fee for relaying,
-mining and transaction creation (default: 0.00001)
-.HP
-\fB\-whitelistforcerelay\fR
-.IP
-Force relay of transactions from whitelisted peers even if they violate
-local relay policy (default: 0)
-.HP
-\fB\-whitelistrelay\fR
-.IP
-Accept relayed transactions received from whitelisted peers even when
-not relaying transactions (default: 1)
-.PP
-Block creation options:
-.HP
-\fB\-blockmaxweight=\fR<n>
-.IP
-Set maximum BIP141 block weight (default: 3996000)
-.HP
-\fB\-blockmintxfee=\fR<amt>
-.IP
-Set lowest fee rate (in BTC/kB) for transactions to be included in block
-creation. (default: 0.00001)
-.PP
-RPC server options:
-.HP
-\fB\-rest\fR
-.IP
-Accept public REST requests (default: 0)
-.HP
-\fB\-rpcallowip=\fR<ip>
-.IP
-Allow JSON\-RPC connections from specified source. Valid for <ip> are a
-single IP (e.g. 1.2.3.4), a network/netmask (e.g.
-1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This
-option can be specified multiple times
-.HP
-\fB\-rpcauth=\fR<userpw>
-.IP
-Username and HMAC\-SHA\-256 hashed password for JSON\-RPC connections. The
-field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
-canonical python script is included in share/rpcauth. The client
-then connects normally using the
-rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
-option can be specified multiple times
-.HP
-\fB\-rpcbind=\fR<addr>[:port]
-.IP
-Bind to given address to listen for JSON\-RPC connections. Do not expose
-the RPC server to untrusted networks such as the public internet!
-This option is ignored unless \fB\-rpcallowip\fR is also passed. Port is
-optional and overrides \fB\-rpcport\fR. Use [host]:port notation for
-IPv6. This option can be specified multiple times (default:
-127.0.0.1 and ::1 i.e., localhost)
-.HP
-\fB\-rpccookiefile=\fR<loc>
-.IP
-Location of the auth cookie. Relative paths will be prefixed by a
-net\-specific datadir location. (default: data dir)
-.HP
-\fB\-rpcpassword=\fR<pw>
-.IP
-Password for JSON\-RPC connections
-.HP
-\fB\-rpcport=\fR<port>
-.IP
-Listen for JSON\-RPC connections on <port> (default: 8332, testnet:
-18332, regtest: 18443)
-.HP
-\fB\-rpcserialversion\fR
-.IP
-Sets the serialization of raw transaction or block hex returned in
-non\-verbose mode, non\-segwit(0) or segwit(1) (default: 1)
-.HP
-\fB\-rpcthreads=\fR<n>
-.IP
-Set the number of threads to service RPC calls (default: 4)
-.HP
-\fB\-rpcuser=\fR<user>
-.IP
-Username for JSON\-RPC connections
-.HP
-\fB\-server\fR
-.IP
-Accept command line and JSON\-RPC commands
-.SH COPYRIGHT
-Copyright (C) 2009-2019 The Bitcoin Core developers
+bitcoind \- manual page for bitcoind
 
-Please contribute if you find Bitcoin Core useful. Visit
-<https://bitcoincore.org> for further information about the software.
-The source code is available from <https://github.com/bitcoin/bitcoin>.
-
-This is experimental software.
-Distributed under the MIT software license, see the accompanying file COPYING
-or <https://opensource.org/licenses/MIT>
+This is a placefolder file. Please follow the instructions in \fIcontrib/devtools/README.md\fR to generate the manual pages after a release.