Merge #14103: docs: Fix broken Doxygen comments

0e534d4dcae91ecf7ebd7a667227f7c26b4d5755 Fix incorrect Doxygen comments (practicalswift)

Pull request description:

  Fix broken Doxygen comments.

  This commit was taken from #13914 which now only covers `-Wdocumentation`.

Tree-SHA512: dddbca16bb792b8193e5f417151b5eace9acc942a321f1bc095b906e98889e3bd93509fe112ab6a24ee1f6a3a918db905bda7acefd53774fe3e6ebe669fb51ac

4 files changed, 47 insertions, 49 deletions

diff --git a/src/policy/fees.h b/src/policy/fees.h
index 136fb481f7..2733c5a7de 100644
--- a/src/policy/fees.h
+++ b/src/policy/fees.h
@@ -22,51 +22,6 @@ class CTxMemPoolEntry;
 class CTxMemPool;
 class TxConfirmStats;
 
-/** \class CBlockPolicyEstimator
- * The BlockPolicyEstimator is used for estimating the feerate needed
- * for a transaction to be included in a block within a certain number of
- * blocks.
- *
- * At a high level the algorithm works by grouping transactions into buckets
- * based on having similar feerates and then tracking how long it
- * takes transactions in the various buckets to be mined.  It operates under
- * the assumption that in general transactions of higher feerate will be
- * included in blocks before transactions of lower feerate.   So for
- * example if you wanted to know what feerate you should put on a transaction to
- * be included in a block within the next 5 blocks, you would start by looking
- * at the bucket with the highest feerate transactions and verifying that a
- * sufficiently high percentage of them were confirmed within 5 blocks and
- * then you would look at the next highest feerate bucket, and so on, stopping at
- * the last bucket to pass the test.   The average feerate of transactions in this
- * bucket will give you an indication of the lowest feerate you can put on a
- * transaction and still have a sufficiently high chance of being confirmed
- * within your desired 5 blocks.
- *
- * Here is a brief description of the implementation:
- * When a transaction enters the mempool, we track the height of the block chain
- * at entry.  All further calculations are conducted only on this set of "seen"
- * transactions. Whenever a block comes in, we count the number of transactions
- * in each bucket and the total amount of feerate paid in each bucket. Then we
- * calculate how many blocks Y it took each transaction to be mined.  We convert
- * from a number of blocks to a number of periods Y' each encompassing "scale"
- * blocks.  This is tracked in 3 different data sets each up to a maximum
- * number of periods. Within each data set we have an array of counters in each
- * feerate bucket and we increment all the counters from Y' up to max periods
- * representing that a tx was successfully confirmed in less than or equal to
- * that many periods. We want to save a history of this information, so at any
- * time we have a counter of the total number of transactions that happened in a
- * given feerate bucket and the total number that were confirmed in each of the
- * periods or less for any bucket.  We save this history by keeping an
- * exponentially decaying moving average of each one of these stats.  This is
- * done for a different decay in each of the 3 data sets to keep relevant data
- * from different time horizons.  Furthermore we also keep track of the number
- * unmined (in mempool or left mempool without being included in a block)
- * transactions in each bucket and for how many blocks they have been
- * outstanding and use both of these numbers to increase the number of transactions
- * we've seen in that feerate bucket when calculating an estimate for any number
- * of confirmations below the number of blocks they've been outstanding.
- */
-
 /* Identifier for each of the 3 different TxConfirmStats which will track
  * history over different time horizons. */
 enum class FeeEstimateHorizon {
@@ -130,7 +85,50 @@ struct FeeCalculation
     int returnedTarget = 0;
 };
 
-/**
+/** \class CBlockPolicyEstimator
+ * The BlockPolicyEstimator is used for estimating the feerate needed
+ * for a transaction to be included in a block within a certain number of
+ * blocks.
+ *
+ * At a high level the algorithm works by grouping transactions into buckets
+ * based on having similar feerates and then tracking how long it
+ * takes transactions in the various buckets to be mined.  It operates under
+ * the assumption that in general transactions of higher feerate will be
+ * included in blocks before transactions of lower feerate.   So for
+ * example if you wanted to know what feerate you should put on a transaction to
+ * be included in a block within the next 5 blocks, you would start by looking
+ * at the bucket with the highest feerate transactions and verifying that a
+ * sufficiently high percentage of them were confirmed within 5 blocks and
+ * then you would look at the next highest feerate bucket, and so on, stopping at
+ * the last bucket to pass the test.   The average feerate of transactions in this
+ * bucket will give you an indication of the lowest feerate you can put on a
+ * transaction and still have a sufficiently high chance of being confirmed
+ * within your desired 5 blocks.
+ *
+ * Here is a brief description of the implementation:
+ * When a transaction enters the mempool, we track the height of the block chain
+ * at entry.  All further calculations are conducted only on this set of "seen"
+ * transactions. Whenever a block comes in, we count the number of transactions
+ * in each bucket and the total amount of feerate paid in each bucket. Then we
+ * calculate how many blocks Y it took each transaction to be mined.  We convert
+ * from a number of blocks to a number of periods Y' each encompassing "scale"
+ * blocks.  This is tracked in 3 different data sets each up to a maximum
+ * number of periods. Within each data set we have an array of counters in each
+ * feerate bucket and we increment all the counters from Y' up to max periods
+ * representing that a tx was successfully confirmed in less than or equal to
+ * that many periods. We want to save a history of this information, so at any
+ * time we have a counter of the total number of transactions that happened in a
+ * given feerate bucket and the total number that were confirmed in each of the
+ * periods or less for any bucket.  We save this history by keeping an
+ * exponentially decaying moving average of each one of these stats.  This is
+ * done for a different decay in each of the 3 data sets to keep relevant data
+ * from different time horizons.  Furthermore we also keep track of the number
+ * unmined (in mempool or left mempool without being included in a block)
+ * transactions in each bucket and for how many blocks they have been
+ * outstanding and use both of these numbers to increase the number of transactions
+ * we've seen in that feerate bucket when calculating an estimate for any number
+ * of confirmations below the number of blocks they've been outstanding.
+ *
  *  We want to be able to estimate feerates that are needed on tx's to be included in
  * a certain number of blocks.  Every time a block is added to the best chain, this class records
  * stats on the transactions included in that block
diff --git a/src/qt/bitcoingui.h b/src/qt/bitcoingui.h
index 61cd6f76cc..dcaca10557 100644
--- a/src/qt/bitcoingui.h
+++ b/src/qt/bitcoingui.h
@@ -212,7 +212,7 @@ private:
     void setEncryptionStatus(int status);
 
     /** Set the hd-enabled status as shown in the UI.
-     @param[in] status            current hd enabled status
+     @param[in] hdEnabled         current hd enabled status
      @see WalletModel::EncryptionStatus
      */
     void setHDStatus(int hdEnabled);
diff --git a/src/qt/rpcconsole.cpp b/src/qt/rpcconsole.cpp
index 00fc73574e..ad13b20ebe 100644
--- a/src/qt/rpcconsole.cpp
+++ b/src/qt/rpcconsole.cpp
@@ -142,7 +142,7 @@ public:
  *   - Within single quotes, no escaping is possible and no special interpretation takes place
  *
  * @param[in]    node    optional node to execute command on
- * @param[out]   result      stringified Result from the executed command(chain)
+ * @param[out]   strResult   stringified result from the executed command(chain)
  * @param[in]    strCommand  Command line to split
  * @param[in]    fExecute    set true if you want the command to be executed
  * @param[out]   pstrFilteredOut  Command line, filtered to remove any sensitive data
diff --git a/src/wallet/wallet.h b/src/wallet/wallet.h
index 5f550319ed..641c0061df 100644
--- a/src/wallet/wallet.h
+++ b/src/wallet/wallet.h
@@ -999,7 +999,7 @@ public:
     unsigned int m_confirm_target{DEFAULT_TX_CONFIRM_TARGET};
     bool m_spend_zero_conf_change{DEFAULT_SPEND_ZEROCONF_CHANGE};
     bool m_signal_rbf{DEFAULT_WALLET_RBF};
-    bool m_allow_fallback_fee{true}; //<! will be defined via chainparams
+    bool m_allow_fallback_fee{true}; //!< will be defined via chainparams
     CFeeRate m_min_fee{DEFAULT_TRANSACTION_MINFEE}; //!< Override with -mintxfee
     /**
      * If fee estimation does not have enough data to provide estimates, use this fee instead.