TOC 1. Introduction 2. Installing and setting up the Android environment 3. Getting the source code 4. Installing the required Ubuntu packages 5. How to compile 6. Installing XBMC in an Android system 7. Running and debugging XBMC in an Android system 8. Architecture 9. Useful Commands ----------------------------------------------------------------------------- 1. Introduction ----------------------------------------------------------------------------- We currently recommend Ubuntu Natty (11.04) or later. Current work has been done here. Additionally, building from OSX Snow Leopard is working. NOTE TO NEW USERS: All lines that are prefixed with the '#' character are commands that need to be typed into a terminal window / console (similar to the command prompt for Windows). Note that the '#' character itself should NOT be typed as part of the command. ----------------------------------------------------------------------------- 2. Installing the required Ubuntu packages ----------------------------------------------------------------------------- These are the minimum packages necessary for building XBMC. Non-Ubuntu users will need to get the equivalents. # sudo apt-get install build-essential default-jdk git curl autoconf \ unzip zip zlib1g-dev gawk gperf cmake If you run a 64bit operating system you will also need to get ia32-libs # sudo apt-get install ia32-libs ----------------------------------------------------------------------------- 3. Installing and setting up the Android environment ----------------------------------------------------------------------------- To develop XBMC for Android the Android SDK and NDK are required. -------------------------------------------------------------------- 3.1. Getting the Android SDK and NDK -------------------------------------------------------------------- To get the Android SDK, go to http://developer.android.com/sdk and download the latest version for your operating system. The NDK can be downloaded from http://developer.android.com/tools/sdk/ndk/ [NOTICE] Compiling XBMC for Android requires at least Android NDK Revision r8e. Android NDK Revision 7 and earlier do not work properly for our cause. After downloading the SDK and NDK extract the files contained in the archives to your harddisk. Make sure you have a recent JRE and JDK installed otherwise the Android SDK will not work. -------------------------------------------------------------------- 3.2. Installing Android SDK packages -------------------------------------------------------------------- After having extracted the Android SDK to you need to install some android packages using the Android SDK Manager: # cd /tools # ./android update sdk -u -t platform,platform-tool -------------------------------------------------------------------- 3.3. Setup the Android toolchain -------------------------------------------------------------------- To be able to compile XBMC and the libraries it depends on for the Android platform you first need to setup an Android toolchain using the Android NDK which you earlier extracted to . The following commands will create a toolchain suitable for the most common scenario. The --install-dir option (and therefore the value) specifies where the resulting toolchain should be installed (your choice). # cd # ls platforms # cd build/tools # ./make-standalone-toolchain.sh --ndk-dir=../../ \ --install-dir=/android-14 --platform=android-14 \ --toolchain=arm-linux-androideabi-4.7 Make sure to pick a toolchain for your desired architecture. Currently only gcc 4.7 and gcc 4.8 toolchains are supported, anything else will likely fail to build. -------------------------------------------------------------------- 3.4. Create a (new) debug key to sign debug APKs -------------------------------------------------------------------- All packages must be signed. The following command will generate a self-signed debug key. If the result is a cryptic error, it probably just means a debug key already existed, no cause for alarm. # keytool -genkey -keystore ~/.android/debug.keystore -v -alias \ androiddebugkey -dname "CN=Android Debug,O=Android,C=US" -keypass \ android -storepass android -keyalg RSA -keysize 2048 -validity 10000 ----------------------------------------------------------------------------- 4. Getting the source code ----------------------------------------------------------------------------- # cd $HOME # git clone git://github.com/xbmc/xbmc.git xbmc-android # cd xbmc-android # git submodule update --init addons/skin.touched ----------------------------------------------------------------------------- 5. How to compile ----------------------------------------------------------------------------- Compiling XBMC for Android consists of compiling the libraries XBMC depends on with the Android toolchain and creating an Android Application Package (APK) which can be installed in an Android system. -------------------------------------------------------------------- 5.1. Building dependencies -------------------------------------------------------------------- # cd $HOME/xbmc-android/tools/depends # ./bootstrap # ./configure --help Run configure with the correct settings for you local configuration. See tools/depends/README for examples. Anyone working on the dependencies themselves will want to set the environment variables specified in ~/.bashrc or similar, to avoid having to input these with each configure. # make -j This build was designed to be massively parallel. Don't be afraid to give it a 'make -j20' or so. Verify that all deps built correctly (it will tell you so) before continuing. You will get crazy build errors otherwise. -------------------------------------------------------------------- 5.2. Building XBMC -------------------------------------------------------------------- # cd $HOME/xbmc-android # make -C tools/depends/target/xbmc # make # make apk After the first build (assuming bootstrap and configure are successful), subsequent builds can be run with a simple 'make' and 'make apk'. ----------------------------------------------------------------------------- 6. Installing XBMC in an Android system ----------------------------------------------------------------------------- To install XBMC through the previously built APK in an Android system you can either install it on a real device (smartphone/tablet/...) running Android >= 2.3.x. -------------------------------------------------------------------- 6.1. Installing XBMC on the Android device -------------------------------------------------------------------- Make sure your Android device is connected to your computer through USB. Furthermore you have to enable the following option in your device's Android settings: - Applications [X] Unknown sources # cd $HOME/xbmc-android/tools/android/packaging # adb devices # adb -s install -r images/xbmcapp-debug.apk The can be retrieved from the list returned by the "adb devices" command and is the first value in the row representing your device. ----------------------------------------------------------------------------- 7. Running and debugging XBMC in an Android system ----------------------------------------------------------------------------- After installing XBMC's APK in an Android system you can start it using its Launcher icon in Android's Application Launcher. -------------------------------------------------------------------- 7.1. Debugging XBMC -------------------------------------------------------------------- To be able to see what is happening while running XBMC you first need to enable USB debugging in your Android settings (this is already done when using the emulator): - Applications [X] Unknown sources - Development [X] USB debugging To access the log output of your Android system run (the -s parameter and the may not be needed when using the Android emulator) # adb -s logcat -------------------------------------------------------------------- 7.2. GDB -------------------------------------------------------------------- GDB can be used to debug, though the support is rather primitive. Rather than using gdb directly, you will need to use ndk-gdb which wraps it. Do NOT trust the -p/--project switches, as of ndk7b they do not work. Instead you will need to cd to tools/android/packaging/xbmc and execute it from there. # ndk-gdb --start --delay=0 This will open the installed version of XBMC and break. The warnings can be ignored as we have setup the appropriate paths already. -------------------------------------------------------------------- 8. Architecture -------------------------------------------------------------------- During the early days of the android port, xbmc was launched via a stub lib that then dlopen'd libxbmc. This was done to get around bionic's poor handling of shared libs. We now compile everything into libxbmc itself so that it has no runtime dependencies beyond system libs. Done this way, we're able to launch into libxbmc directly. But we still hit Bionic's loader's deficiencies when we dlopen a lib. There are two main issues to overcome for loading: 1. Bionic imports all symbols for a lib as soon as it is loaded, and it will refuse to open a lib if it has a single unresolved symbol 2. It does not search recursively during the resolve. So if liba depends on libb, dlopen'ing liba will _not_ pull in missing symbols from libb. This is particularly nasty considering #1. To work-around these problems we use our own recursive loader in place of dlopen. This loader mimics expected behavior. Using the example above, loading libb before liba will mean that everything will resolve correctly. Additionally, Android does not use versioned solibs. libfoo.so.1 which is typical on linux would not be found by the loader. This means that we must strip the SONAME and NEEDED values out of the libs as well as changing the filenames themselves. The cleaner solution would be to patch libtool/cmake/etc to not add versioning in the first place. For now, we use the brute-force approach of modifying the binary and blanking out the versions. See here for more info: http://www.bernawebdesign.ch/byteblog/2011/11/23/creating-non-versioned-shared-libraries-for-android/ As a final gotcha, all libs must be in the form of ^lib.*so$ with no exceptions (they won't even install otherwise), and the soname must match. So we have to do some renaming to get some of our self-built libs loaded. Development: Typical android native activities are built with ndk-build which is a wrapper around Make. It would be a nightmare to port our entire buildsystem over, so instead we build as usual then package ourselves. It may be beneficial to use ndk-build to do the actual packaging, but for now its behavior is emulated. ABI: Presently we are targeting armv7a+neon for arm, and i686 for x86. Note that x86 builds successfully but has not been tested. -------------------------------------------------------------------- 9. Useful Commands -------------------------------------------------------------------- Below are a few helpful commands when building/debugging. These assume that pwd is 'tools/android/packaging' and that the proper sdk/ndk paths are set. -Install a new build over the existing one # adb -e install -r images/xbmcapp-debug.apk -Launch XBMC on the emulator without the GUI # adb shell am start -a android.intent.action.MAIN -n org.xbmc.xbmc/android.app.NativeActivity -Kill a misbehaving XBMC # adb shell ps | grep org.xbmc | awk '{print $2}' | xargs adb shell kill -Filter logcat messages by a specific tag (e.g. "XBMC") # adb logcat -s XBMC:V -Enable CheckJNI (BEFORE starting the application) # adb shell setprop debug.checkjni 1