From a8b8258e12f8e04936bffd82a2e31be7117ec860 Mon Sep 17 00:00:00 2001 From: Christian Grothoff Date: Sat, 21 Mar 2020 12:56:16 +0100 Subject: steps towards new split-auditor logic --- contrib/auditor-report.tex.j2 | 326 +++++++++++++++++------- contrib/render.py | 14 +- src/auditor/.gitignore | 5 +- src/auditor/report-lib.c | 2 +- src/auditor/report-lib.h | 2 +- src/auditor/taler-helper-auditor-aggregation.c | 14 +- src/auditor/taler-helper-auditor-coins.c | 27 +- src/auditor/taler-helper-auditor-deposits.c | 10 +- src/auditor/taler-helper-auditor-reserves.c | 12 +- src/auditor/test-auditor.sh | 340 ++++++++++++++----------- 10 files changed, 483 insertions(+), 269 deletions(-) diff --git a/contrib/auditor-report.tex.j2 b/contrib/auditor-report.tex.j2 index 28c40f88d..ccb249dd3 100644 --- a/contrib/auditor-report.tex.j2 +++ b/contrib/auditor-report.tex.j2 @@ -64,51 +64,58 @@ This report is based on a template licensed under the Affero General Public License, either version 3, or (at your option) any later version. The source code for the template is available at \url{https://git.taler.net/}. -The report was generated by the auditor started at -{\bf {{ data.auditor_start_time }} } and concluded at -{\bf {{ data.auditor_end_time }} }. +The report was generated by the auditors at the following times: -In that time, the auditor processed the following table ranges: +\begin{table}[h!] +\begin{center} +\begin{tabular}{l|r|r} + Auditor & Start & End \\ \hline \hline + Aggregation & {{ aggregation.auditor_start_time }} & {{ aggregation.auditor_end_time }} \\ \hline + Coins & {{ coins.auditor_start_time }} & {{ coins.auditor_end_time }} \\ \hline + Deposits & {{ deposits.auditor_start_time }} & {{ deposits.auditor_end_time }} \\ \hline + Reserves & {{ reserves.auditor_start_time }} & {{ reserves.auditor_end_time }} \\ \hline + Wire & {{ wire.wire_auditor_start_time }} & {{ wire.wire_auditor_end_time }} \\ +\end{tabular} +\end{center} +\end{table} + +In that time, the auditors processed the following table ranges: \begin{table}[h!] \begin{center} \begin{tabular}{l|r|r} Table & Start & End \\ \hline \hline - Reserves Incoming & {{ data.start_ppr_reserve_in_serial_id }} - & {{ data.end_ppr_reserve_in_serial_id }} \\ \hline - Reserves Out (withdraw) & {{ data.start_ppr_reserve_out_serial_id }} - & {{ data.end_ppr_reserve_out_serial_id }} \\ \hline - Reserves Recoup & {{ data.start_ppr_reserve_recoup_serial_id }} - & {{ data.end_ppr_reserve_recoup_serial_id }} \\ \hline - Reserves Close & {{ data.start_ppr_reserve_close_serial_id }} - & {{ data.end_ppr_reserve_close_serial_id }} \\ \hline - Aggregation & {{ data.start_ppa_wire_out_serial_id }} - & {{ data.end_ppa_wire_out_serial_id }} \\ \hline - Coin withdraw & {{ data.start_ppc_withdraw_serial_id }} - & {{ data.end_ppc_withdraw_serial_id }} \\ \hline - Coin deposit & {{ data.start_ppc_deposit_serial_id }} - & {{ data.end_ppc_deposit_serial_id }} \\ \hline - Coin melt & {{ data.start_ppc_melt_serial_id }} - & {{ data.end_ppc_melt_serial_id }} \\ \hline - Coin refund & {{ data.start_ppc_refund_serial_id }} - & {{ data.end_ppc_refund_serial_id }} \\ \hline - Coin recoup & {{ data.start_ppc_recoup_serial_id }} - & {{ data.end_ppc_recoup_serial_id }} \\ \hline - Coin recoup refresh & {{ data.start_ppc_recoup_refresh_serial_id }} - & {{ data.end_ppc_recoup_refresh_serial_id }} \\ + Reserves Incoming & {{ reserves.start_ppr_reserve_in_serial_id }} + & {{ reserves.end_ppr_reserve_in_serial_id }} \\ \hline + Reserves Out (withdraw) & {{ reserves.start_ppr_reserve_out_serial_id }} + & {{ reserves.end_ppr_reserve_out_serial_id }} \\ \hline + Reserves Recoup & {{ reserves.start_ppr_reserve_recoup_serial_id }} + & {{ reserves.end_ppr_reserve_recoup_serial_id }} \\ \hline + Reserves Close & {{ reserves.start_ppr_reserve_close_serial_id }} + & {{ reserves.end_ppr_reserve_close_serial_id }} \\ \hline + Aggregation & {{ aggregation.start_ppa_wire_out_serial_id }} + & {{ aggregation.end_ppa_wire_out_serial_id }} \\ \hline + Coin withdraw & {{ coins.start_ppc_withdraw_serial_id }} + & {{ coins.end_ppc_withdraw_serial_id }} \\ \hline + Coin deposit & {{ coins.start_ppc_deposit_serial_id }} + & {{ coins.end_ppc_deposit_serial_id }} \\ \hline + Coin melt & {{ coins.start_ppc_melt_serial_id }} + & {{ coins.end_ppc_melt_serial_id }} \\ \hline + Coin refund & {{ coins.start_ppc_refund_serial_id }} + & {{ coins.end_ppc_refund_serial_id }} \\ \hline + Coin recoup & {{ coins.start_ppc_recoup_serial_id }} + & {{ coins.end_ppc_recoup_serial_id }} \\ \hline + Coin recoup refresh & {{ coins.start_ppc_recoup_refresh_serial_id }} + & {{ coins.end_ppc_recoup_refresh_serial_id }} \\ \end{tabular} \end{center} \caption{Serial number ranges of the tables processed by the audit.} \label{table:auditor_range} \end{table} -The report was generated by the wire auditor started at -{\bf {{ wire.wire_auditor_start_time }} } and concluded at -{\bf {{ wire.wire_auditor_end_time }} }. - {% if wire.account_progress|length() == 0 %} -In that time, the auditor processed NO accounts at all. +In that time, the wire auditor processed NO accounts at all. {% else %} -In that time, the auditor processed the following table ranges: +In that time, the wire auditor processed the following table ranges: \begin{center} \begin{longtable}{l|c|r|r} Account & Table & Start & End \\ \hline @@ -136,19 +143,21 @@ In that time, the auditor processed the following table ranges: \section{Operations} The balance of the escrow account should -be {\bf {{ data.total_escrow_balance }}}. +be {\bf {{ coins.total_escrow_balance }}} (coins) +plus {\bf {{ reserves.total_escrow_balance }}} (reserves). \noindent The active operational risk stands at -{\bf {{ data.total_active_risk }}}. +{\bf {{ coins.total_active_risk }}}. \noindent Loss (actualized risk from recoups) is -{\bf {{ data.total_recoup_loss }}}. +{\bf {{ coins.total_recoup_loss }}}. \noindent Recoups of non-revoked coins are at -{\bf {{ data.total_irregular_recoups }}}. +{\bf {{ coins.total_irregular_recoups }}} (coins) +plus {\bf {{ reserves.total_irregular_recoups }}} (reserves). \section{Income} @@ -160,12 +169,11 @@ This section analyzes the income of the exchange operator from fees. \label{table:revenue} \begin{tabular}{l|r} Category & Amount \\ \hline \hline - Withdraw fees & {{ data.total_withdraw_fee_income }} \\ - Deposit fees & {{ data.total_deposit_fee_income }} \\ - Melt fees & {{ data.total_melt_fee_income }} \\ - Refund fees & {{ data.total_refund_fee_income }} \\ - Aggregation fees & {{ data.total_aggregation_fee_income }} \\ \hline \hline - {\bf Total} & {{ data.income_fee_total }} \\ + Withdraw fees & {{ reserves.total_withdraw_fee_income }} \\ + Deposit fees & {{ coins.total_deposit_fee_income }} \\ + Melt fees & {{ coins.total_melt_fee_income }} \\ + Refund fees & {{ coins.total_refund_fee_income }} \\ + Aggregation fees & {{ aggregation.total_aggregation_fee_income }} \\ \end{tabular} \end{center} \end{table} @@ -297,15 +305,15 @@ and should be answered by revoking the exchange's online siging keys. % TODO: maybe reference PhD thesis on this? The total amount the exchange currently lags behind is -{\bf {{ data.missing_deposit_confirmation_total }} } from a total number of -{\bf {{ data.missing_deposit_confirmation_count }} } deposit confirmations. +{\bf {{ deposits.missing_deposit_confirmation_total }} } from a total number of +{\bf {{ deposits.missing_deposit_confirmation_count }} } deposit confirmations. Note that some lag is perfectly normal. Below, we report {\em all} deposit confirmations that are lagging behind. % Table generation tested by testcase #24 in test-auditor.sh -{% if data.deposit_confirmation_inconsistencies|length() == 0 %} +{% if deposits.deposit_confirmation_inconsistencies|length() == 0 %} {\bf No deposit confirmations that are lagging behind detected.} {% else %} \begin{longtable}{r|r|r} @@ -325,7 +333,7 @@ Below, we report {\em all} deposit confirmations that are lagging behind. \caption{Missing deposit confirmations.} \label{table:missing_dc} \endlastfoot -{% for item in data.deposit_confirmation_inconsistencies %} +{% for item in deposits.deposit_confirmation_inconsistencies %} {{ item.timestamp }} & {{ item.amount }} & {{ item.rowid }} \\ @@ -355,18 +363,18 @@ exposure} is the amount of coins in circulation for a particular denomination and the maximum loss for the exchange from this type of compromise. -{% if (data.emergencies|length() != 0) %} +{% if (coins.emergencies|length() != 0) %} The total risk from emergencies detected by amount is -{\bf {{ data.emergencies_risk_by_amount }} }. +{\bf {{ coins.emergencies_risk_by_amount }} }. The total loss from emergencies detected by amount is -{\bf {{ data.emergencies_loss }} }. +{\bf {{ coins.emergencies_loss }} }. {% endif %} -{% if (data.emergencies_by_count|length() != 0) %} +{% if (coins.emergencies_by_count|length() != 0) %} The total risk from emergencies detected by counting coins is -{\bf {{ data.emergencies_risk_by_count }} } +{\bf {{ coins.emergencies_risk_by_count }} } The total loss from emergencies detected by counting coins could be up to -{\bf {{ data.emergencies_loss_by_count }} }. +{\bf {{ coins.emergencies_loss_by_count }} }. {% endif %} @@ -374,7 +382,7 @@ The total loss from emergencies detected by counting coins could be up to % Table generation tested by testcase #18 in test-auditor.sh -{% if data.emergencies_by_count|length() == 0 %} +{% if coins.emergencies_by_count|length() == 0 %} {\bf No emergencies detected by counting coins.} {% else %} \begin{longtable}{r|c|r|r} @@ -391,7 +399,7 @@ The total loss from emergencies detected by counting coins could be up to \caption{Emergencies by counting coins.} \label{table:emergencies_coin_counting} \endlastfoot -{% for item in data.emergencies_by_count %} +{% for item in coins.emergencies_by_count %} \multicolumn{4}{l}{ {\tt \truncate{0.95\textwidth}{ {{ item.denompub_hash }} } } } \\ \nopagebreak {{ item.value }} & @@ -416,7 +424,7 @@ indicator that the exchange's private signing key was compromised. % Table generation tested by testcases #18, #25 in test-auditor.sh -{% if data.emergencies|length() == 0 %} +{% if coins.emergencies|length() == 0 %} {\bf No emergencies by value detected.} {% else %} \begin{longtable}{r|c|r|r} @@ -433,7 +441,7 @@ indicator that the exchange's private signing key was compromised. \caption{Emergencies by value deposited.} \label{table:emergencies} \endlastfoot -{% for item in data.emergencies %} +{% for item in coins.emergencies %} \multicolumn{4}{l}{ {\tt \truncate{0.95\textwidth}{ {{ item.denompub_hash }} } } } \\ \nopagebreak {{ item.value }} & @@ -504,7 +512,7 @@ compromise resulting in proportional financial losses to the exchange. % Table generation tested by testcase #2 in test-auditor.sh -{% if data.reserve_balance_insufficient_inconsistencies|length() == 0 %} +{% if reserves.reserve_balance_insufficient_inconsistencies|length() == 0 %} {\bf All withdrawals were covered by sufficient reserve funding.} {% else %} \begin{longtable}{p{8.5cm}|r} @@ -517,11 +525,11 @@ compromise resulting in proportional financial losses to the exchange. \endfoot \hline {\bf Total loss} & - {{ data.total_loss_balance_insufficient }} \\ + {{ reserves.total_loss_balance_insufficient }} \\ \caption{Reserves with withdrawals higher than reserve funding.} \label{table:reserve:balance_insufficient} \endlastfoot -{% for item in data.reserve_balance_insufficient_inconsistencies %} +{% for item in reserves.reserve_balance_insufficient_inconsistencies %} {\tt \small {{ item.reserve_pub }} } & {{ item.loss }} \\ \hline @@ -543,7 +551,7 @@ would be reported separately in Section~\ref{sec:wire_check_out}. % Table generation tested by testcase #23 in test-auditor.sh -{% if data.wire_out_inconsistencies|length() == 0 %} +{% if aggregation.wire_out_inconsistencies|length() == 0 %} {\bf All aggregations matched up.} {% else %} \begin{longtable}{r|r|r} @@ -559,12 +567,12 @@ would be reported separately in Section~\ref{sec:wire_check_out}. \endfoot \hline {\bf Total deltas} & - {{ data.total_wire_out_delta_plus}} & - - {{ data.total_wire_out_delta_minus}} \\ + {{ aggregation.total_wire_out_delta_plus}} & + - {{ aggregation.total_wire_out_delta_minus}} \\ \caption{Claimed wire out aggregate totals not matching up.} \label{table:reserve:wire_out_balance_inconsistencies} \endlastfoot -{% for item in data.wire_out_inconsistencies %} +{% for item in aggregation.wire_out_inconsistencies %} \multicolumn{3}{l}{ {\tt \truncate{0.95\textwidth}{ {% if 'payto_uri' in item.destination_account %} {{ item.destination_account.payto_uri }} @@ -589,7 +597,7 @@ any effects on its own balance, those entries are excluded from the total. % Table generation tested by testcase #25 in test-auditor.sh -{% if data.coin_inconsistencies|length() == 0 %} +{% if aggregation.coin_inconsistencies|length() == 0 %} {\bf All coin histories were unproblematic.} {% else %} \begin{longtable}{p{1.8cm}|r|r} @@ -607,12 +615,12 @@ any effects on its own balance, those entries are excluded from the total. \endfoot \hline $\sum$ {\bf Delta (Auditor-Exchange)} & - {{ data.total_coin_delta_plus }} & - - {{ data.total_coin_delta_minus }} \\ + {{ aggregation.total_coin_delta_plus }} & + - {{ aggregation.total_coin_delta_minus }} \\ \caption{Arithmetic inconsistencies of amount calculations involving a coin.} \label{table:amount:arithmetic:coin:inconsistencies} \endlastfoot -{% for item in data.coin_inconsistencies %} +{% for item in aggregation.coin_inconsistencies %} {{ item.operation }} & \multicolumn{2}{l}{ {\tt \small {{ item.coin_pub }} } } \\ \nopagebreak & @@ -637,9 +645,81 @@ the (hash of the) denomination public key for ``recoup-verify'' and ``deposit-verify'' operations, and the master public key for ``recoup-master'' operations. -% Table generation tested by testcase #4/#5/#6/#7/#13 in test-auditor.sh +\subsubsection{For aggregations} + +% Table generation tested by testcase #XX in test-auditor.sh + +{% if aggregation.bad_sig_losses|length() == 0 %} + {\bf All signatures were valid.} +{% else %} + \begin{longtable}{l|r|r} + \multicolumn{3}{l}{ {\bf Public key} }\\ + {\bf Operation type} & Database row & {\bf Loss amount} \\ + \hline \hline +\endfirsthead + \multicolumn{3}{l}{ {\bf Public key} }\\ + {\bf Operation type} & Database row & {\bf Loss amount} \\ \hline \hline +\endhead + \hline \hline + \multicolumn{3}{l}{ {\bf Public key} }\\ + {\bf Operation type} & Database row & {\bf Loss amount} \\ +\endfoot + \hline + \multicolumn{2}{l}{ {\bf Total losses} } & + {\bf {{ aggregation.total_bad_sig_loss}} } \\ + \caption{Losses from operations performed on coins without proper signatures.} + \label{table:bad_signature_losses} +\endlastfoot +{% for item in aggregation.bad_sig_losses %} + \multicolumn{3}{l}{ {\tt \small \truncate{0.9\textwidth}{ {{ item.key_pub }} } } } \\ +\nopagebreak + {{ item.operation }} & + {{ item.row }} & + {{ item.loss }} \\ \hline +{% endfor %} + \end{longtable} +{% endif %} + +\subsubsection{For coins} + +% Table generation tested by testcase #4/#5/#6/#13 in test-auditor.sh + +{% if coins.bad_sig_losses|length() == 0 %} + {\bf All signatures were valid.} +{% else %} + \begin{longtable}{l|r|r} + \multicolumn{3}{l}{ {\bf Public key} }\\ + {\bf Operation type} & Database row & {\bf Loss amount} \\ + \hline \hline +\endfirsthead + \multicolumn{3}{l}{ {\bf Public key} }\\ + {\bf Operation type} & Database row & {\bf Loss amount} \\ \hline \hline +\endhead + \hline \hline + \multicolumn{3}{l}{ {\bf Public key} }\\ + {\bf Operation type} & Database row & {\bf Loss amount} \\ +\endfoot + \hline + \multicolumn{2}{l}{ {\bf Total losses} } & + {\bf {{ coins.total_bad_sig_loss}} } \\ + \caption{Losses from operations performed on coins without proper signatures.} + \label{table:bad_signature_losses} +\endlastfoot +{% for item in coins.bad_sig_losses %} + \multicolumn{3}{l}{ {\tt \small \truncate{0.9\textwidth}{ {{ item.key_pub }} } } } \\ +\nopagebreak + {{ item.operation }} & + {{ item.row }} & + {{ item.loss }} \\ \hline +{% endfor %} + \end{longtable} +{% endif %} + +\subsubsection{For reserves} -{% if data.bad_sig_losses|length() == 0 %} +% Table generation tested by testcase #7 in test-auditor.sh + +{% if reserves.bad_sig_losses|length() == 0 %} {\bf All signatures were valid.} {% else %} \begin{longtable}{l|r|r} @@ -656,11 +736,11 @@ public key for ``recoup-master'' operations. \endfoot \hline \multicolumn{2}{l}{ {\bf Total losses} } & - {\bf {{ data.total_bad_sig_loss}} } \\ + {\bf {{ reserves.total_bad_sig_loss}} } \\ \caption{Losses from operations performed on coins without proper signatures.} \label{table:bad_signature_losses} \endlastfoot -{% for item in data.bad_sig_losses %} +{% for item in reserves.bad_sig_losses %} \multicolumn{3}{l}{ {\tt \small \truncate{0.9\textwidth}{ {{ item.key_pub }} } } } \\ \nopagebreak {{ item.operation }} & @@ -826,7 +906,7 @@ translate into a financial loss (yet). % Table generation tested by testcase #3 in test-auditor.sh -{% if data.reserve_balance_summary_wrong_inconsistencies|length() == 0 %} +{% if reserves.reserve_balance_summary_wrong_inconsistencies|length() == 0 %} {\bf All balances matched up.} {% else %} \begin{longtable}{p{6cm}|r|r} @@ -840,12 +920,12 @@ translate into a financial loss (yet). \hline \hline {\bf Total deltas} & - {{ data.total_balance_summary_delta_plus}} & - - {{ data.total_balance_summary_delta_minus}} \\ + {{ reserves.total_balance_summary_delta_plus}} & + - {{ reserves.total_balance_summary_delta_minus}} \\ \caption{Reserves balances not matching up.} \label{table:reserve:balance_inconsistencies} \endlastfoot -{% for item in data.reserve_balance_summary_wrong_inconsistencies %} +{% for item in reserves.reserve_balance_summary_wrong_inconsistencies %} {\tt \tiny {{ item.reserve_pub }} } & {{ item.auditor }} & {{ item.exchange }} \\ \hline @@ -853,16 +933,16 @@ translate into a financial loss (yet). \end{longtable} {% endif %} -{% if data.reserve_balance_summary_wrong_inconsistencies|length() != 0 %} +{% if reserves.reserve_balance_summary_wrong_inconsistencies|length() != 0 %} This means that there are inconsistencies in the exchange's summary data about reserve balances. \begin{itemize} \item The exchange believes some reserves contain (in total) -{\bf {{ data.total_balance_summary_delta_plus}} } {\em less} than they +{\bf {{ reserves.total_balance_summary_delta_plus}} } {\em less} than they actually contain. A non-zero value here means the exchange may deny legitimate withdrawal requests, denying customers access to their funds. \item The exchange believes some reserves contain (in total) -{\bf {{ data.total_balance_summary_delta_minus}} } {\em more} than they +{\bf {{ reserves.total_balance_summary_delta_minus}} } {\em more} than they actually contain. A non-zero value here means the exchange may allow coins to be withdrawn for which it never received any income, at a loss (for the exchange). \end{itemize} @@ -958,7 +1038,7 @@ with respect to what wire fee it charges at what time. % Table generation tested by testcase #14 in test-auditor.sh -{% if data.wire_fee_time_inconsistencies|length() == 0 %} +{% if aggregation.wire_fee_time_inconsistencies|length() == 0 %} {\bf No wire fee timing issues detected.} {% else %} \begin{longtable}{p{1.5cm}|r|p{6}} @@ -976,7 +1056,7 @@ with respect to what wire fee it charges at what time. \caption{Wire fees with ambiguous timestamps.} \label{table:wire_fee:ambiguity} \endlastfoot -{% for item in data.wire_fee_time_inconsistencies %} +{% for item in aggregation.wire_fee_time_inconsistencies %} {\tt {{ item.type }} } & {{ item.time }} & {{ item.diagnostic }} \\ \hline {% endfor %} \end{longtable} @@ -989,9 +1069,71 @@ with respect to what wire fee it charges at what time. This section describes issues found that do not have a clear financial impact. -% Table generation tested by testcase #13/#15/#25 in test-auditor.sh +\subsubsection{For aggregations} + +% Table generation tested by testcase #15/#25 in test-auditor.sh + +{% if aggregation.row_inconsistencies|length() == 0 %} + {\bf No row inconsistencies found.} +{% else %} + \begin{longtable}{p{2.5cm}|l|p{5cm}} + {\bf Table} & {\bf Row} & {\bf Diagnostic} \\ + \hline \hline +\endfirsthead + {\bf Table} & {\bf Row} & {\bf Diagnostic} \\ + \hline \hline +\endhead + \hline \hline + {\bf Table} & {\bf Row} & {\bf Diagnostic} \\ +\endfoot + \hline \hline + {\bf Table} & {\bf Row} & {\bf Diagnostic} \\ + \caption{Other issues found (by table and row).} + \label{table:misc:aggregation} +\endlastfoot +{% for item in aggregation.row_inconsistencies %} + \verb! {{ item.table }} ! & + {{ item.row }} & + {{ item.diagnostic }} \\ \hline +{% endfor %} + \end{longtable} +{% endif %} + +\subsubsection{For coins} + +% Table generation tested by testcase #13 in test-auditor.sh + +{% if coins.row_inconsistencies|length() == 0 %} + {\bf No row inconsistencies found.} +{% else %} + \begin{longtable}{p{2.5cm}|l|p{5cm}} + {\bf Table} & {\bf Row} & {\bf Diagnostic} \\ + \hline \hline +\endfirsthead + {\bf Table} & {\bf Row} & {\bf Diagnostic} \\ + \hline \hline +\endhead + \hline \hline + {\bf Table} & {\bf Row} & {\bf Diagnostic} \\ +\endfoot + \hline \hline + {\bf Table} & {\bf Row} & {\bf Diagnostic} \\ + \caption{Other issues found (by table and row).} + \label{table:misc:coins} +\endlastfoot +{% for item in coins.row_inconsistencies %} + \verb! {{ item.table }} ! & + {{ item.row }} & + {{ item.diagnostic }} \\ \hline +{% endfor %} + \end{longtable} +{% endif %} + +\subsubsection{For reserves} + +% Table generation tested by testcase #XX in test-auditor.sh -{% if data.row_inconsistencies|length() == 0 %} +{% if reserves.row_inconsistencies|length() == 0 %} {\bf No row inconsistencies found.} {% else %} \begin{longtable}{p{2.5cm}|l|p{5cm}} @@ -1007,9 +1149,9 @@ impact. \hline \hline {\bf Table} & {\bf Row} & {\bf Diagnostic} \\ \caption{Other issues found (by table and row).} - \label{table:misc} + \label{table:misc:reserves} \endlastfoot -{% for item in data.row_inconsistencies %} +{% for item in reserves.row_inconsistencies %} \verb! {{ item.table }} ! & {{ item.row }} & {{ item.diagnostic }} \\ \hline @@ -1032,7 +1174,7 @@ reserve expired. % Table generation tested by testcase #20 in test-auditor.sh -{% if data.reserve_not_closed_inconsistencies|length() == 0 %} +{% if reserves.reserve_not_closed_inconsistencies|length() == 0 %} {\bf All expired reserves were closed.} {% else %} \begin{longtable}{p{4.5cm}|c|r} @@ -1045,11 +1187,11 @@ reserve expired. \endfoot \hline {\bf Sum} & & - {{ data.total_balance_reserve_not_closed}} \\ + {{ reserves.total_balance_reserve_not_closed}} \\ \caption{Reserves not closed on time.} \label{table:reserve:not_closed} \endlastfoot -{% for item in data.reserve_not_closed_inconsistencies %} +{% for item in reserves.reserve_not_closed_inconsistencies %} {\tt \tiny \truncate{4.3cm}{ {{ item.reserve_pub }} } } & {\tiny {{ item.expiration_time }} } & {{ item.balance }} \\ \hline @@ -1067,7 +1209,7 @@ may happen even if the exchange is correct. % Table generation tested by testcase #12 in test-auditor.sh -{% if data.refresh_hanging|length() == 0 %} +{% if coins.refresh_hanging|length() == 0 %} {\bf All melted coins were refreshed.} {% else %} \begin{longtable}{p{6.5cm}|c|r} @@ -1082,11 +1224,11 @@ may happen even if the exchange is correct. \endfoot \hline {\bf Sum} & & - {{ data.total_refresh_hanging}} \\ + {{ coins.total_refresh_hanging}} \\ \caption{Refresh operations hanging.} \label{table:refresh:hanging} \endlastfoot -{% for item in data.refresh_hanging %} +{% for item in coins.refresh_hanging %} \truncate{6.2cm}{ {\tt \small {{ item.coin_pub }} } } & {{ item.row }} & {{ item.amount }} \\ \hline @@ -1104,7 +1246,7 @@ implications. % Table generation tested by testcase #22 in test-auditor.sh -{% if data.denomination_key_validity_withdraw_inconsistencies|length() == 0 %} +{% if reserves.denomination_key_validity_withdraw_inconsistencies|length() == 0 %} {\bf All denomination keys were valid at the time of withdrawals.} {% else %} \begin{longtable}{p{7.5cm}|r} @@ -1124,7 +1266,7 @@ implications. \caption{Execution times not matching denomination key validity period.} \label{table:withdraw:bad_time} \endlastfoot -{% for item in data.denomination_key_validity_withdraw_inconsistencies %} +{% for item in reserves.denomination_key_validity_withdraw_inconsistencies %} {\tt \small \truncate{0.6\textwidth}{ {{ item.reserve_pub }} } } & {{ item.row }} \\ \nopagebreak {\tt \small \truncate{0.6\textwidth}{ {{ item.denompub_h }} } } & {{ item.execution_date }} \\ \hline diff --git a/contrib/render.py b/contrib/render.py index 2290e92f8..cd50f7164 100755 --- a/contrib/render.py +++ b/contrib/render.py @@ -36,6 +36,18 @@ jsonData1 = json.load(jsonFile1) jsonFile2 = open (sys.argv[2], 'r') jsonData2 = json.load(jsonFile2) +jsonFile3 = open (sys.argv[3], 'r') +jsonData3 = json.load(jsonFile3) + +jsonFile4 = open (sys.argv[4], 'r') +jsonData4 = json.load(jsonFile4) + +jsonFile5 = open (sys.argv[5], 'r') +jsonData5 = json.load(jsonFile5) + +jsonFile6 = open (sys.argv[6], 'r') +jsonData6 = json.load(jsonFile6) + jinjaEnv = jinja2.Environment(loader=StdinLoader(), lstrip_blocks=True, trim_blocks=True, @@ -43,4 +55,4 @@ jinjaEnv = jinja2.Environment(loader=StdinLoader(), autoescape=False) tmpl = jinjaEnv.get_template('stdin'); -print(tmpl.render(data = jsonData1, wire = jsonData2)) +print(tmpl.render(data = jsonData1, wire = jsonData2, aggregation = jsonData3, coins = jsonData4, deposits = jsonData5, reserves = jsonData6)) diff --git a/src/auditor/.gitignore b/src/auditor/.gitignore index d065d10a5..95757b5f8 100644 --- a/src/auditor/.gitignore +++ b/src/auditor/.gitignore @@ -2,14 +2,11 @@ taler-auditor-httpd taler-auditor taler-wire-auditor taler-auditor-exchange -test-audit.json test-report.aux test-report.pdf test-report.tex -test-wire-audit.json +*.json texput.aux -test-audit-inc.json -test-wire-audit-inc.json wirefees/ bank.err libauditor.a diff --git a/src/auditor/report-lib.c b/src/auditor/report-lib.c index b00a522a7..128ec6256 100644 --- a/src/auditor/report-lib.c +++ b/src/auditor/report-lib.c @@ -85,7 +85,7 @@ static struct GNUNET_CONTAINER_MultiHashMap *denominations; * @return human-readable string representing the time */ json_t * -TALER_ARL_TALER_ARL_json_from_time_abs_nbo (struct GNUNET_TIME_AbsoluteNBO at) +TALER_ARL_json_from_time_abs_nbo (struct GNUNET_TIME_AbsoluteNBO at) { return json_string (GNUNET_STRINGS_absolute_time_to_string diff --git a/src/auditor/report-lib.h b/src/auditor/report-lib.h index 59229ad14..84619a5da 100644 --- a/src/auditor/report-lib.h +++ b/src/auditor/report-lib.h @@ -87,7 +87,7 @@ extern struct GNUNET_TIME_Absolute start_time; * @return human-readable string representing the time */ json_t * -TALER_ARL_TALER_ARL_json_from_time_abs_nbo (struct GNUNET_TIME_AbsoluteNBO at); +TALER_ARL_json_from_time_abs_nbo (struct GNUNET_TIME_AbsoluteNBO at); /** diff --git a/src/auditor/taler-helper-auditor-aggregation.c b/src/auditor/taler-helper-auditor-aggregation.c index bbad71252..27afcfd88 100644 --- a/src/auditor/taler-helper-auditor-aggregation.c +++ b/src/auditor/taler-helper-auditor-aggregation.c @@ -1441,24 +1441,26 @@ run (void *cls, report = json_pack ("{s:o, s:o, s:o, s:o, s:o," " s:o, s:o, s:o, s:o, s:o," " s:o, s:o, s:o, s:I, s:I," - " s:o, s:o }", + " s:o, s:o, s:o }", /* blocks #1 */ "wire_out_inconsistencies", report_wire_out_inconsistencies, + /* Tested in test-auditor.sh #23 */ "total_wire_out_delta_plus", TALER_JSON_from_amount ( &total_wire_out_delta_plus), + /* Tested in test-auditor.sh #23 */ "total_wire_out_delta_minus", TALER_JSON_from_amount ( &total_wire_out_delta_minus), - /* Tested in test-auditor.sh #4/#5/#6/#7/#13 */ + /* FIXME: Tested in test-auditor.sh #?? */ "bad_sig_losses", report_bad_sig_losses, - /* Tested in test-auditor.sh #4/#5/#6/#7/#13 */ + /* FIXME: Tested in test-auditor.sh #?? */ "total_bad_sig_loss", TALER_JSON_from_amount (&total_bad_sig_loss), /* block #2 */ - /* Tested in test-auditor.sh #14/#15 */ + /* Tested in test-auditor.sh #15 */ "row_inconsistencies", report_row_inconsistencies, "coin_inconsistencies", @@ -1490,7 +1492,9 @@ run (void *cls, start_time), "auditor_end_time", TALER_ARL_json_from_time_abs ( - GNUNET_TIME_absolute_get ()) + GNUNET_TIME_absolute_get ()), + "wire_fee_time_inconsistencies", + report_fee_time_inconsistencies ); GNUNET_break (NULL != report); TALER_ARL_done (report); diff --git a/src/auditor/taler-helper-auditor-coins.c b/src/auditor/taler-helper-auditor-coins.c index c9250961b..d1e91ac27 100644 --- a/src/auditor/taler-helper-auditor-coins.c +++ b/src/auditor/taler-helper-auditor-coins.c @@ -199,10 +199,10 @@ report_emergency_by_amount (const struct "denom_loss", TALER_JSON_from_amount (loss), "start", - TALER_ARL_TALER_ARL_json_from_time_abs_nbo ( + TALER_ARL_json_from_time_abs_nbo ( issue->start), "deposit_end", - TALER_ARL_TALER_ARL_json_from_time_abs_nbo ( + TALER_ARL_json_from_time_abs_nbo ( issue->expire_deposit), "value", TALER_JSON_from_amount_nbo (&issue->value))); @@ -251,10 +251,10 @@ report_emergency_by_count (const struct "denom_risk", TALER_JSON_from_amount (risk), "start", - TALER_ARL_TALER_ARL_json_from_time_abs_nbo ( + TALER_ARL_json_from_time_abs_nbo ( issue->start), "deposit_end", - TALER_ARL_TALER_ARL_json_from_time_abs_nbo ( + TALER_ARL_json_from_time_abs_nbo ( issue->expire_deposit), "value", TALER_JSON_from_amount_nbo (&issue->value))); @@ -2238,16 +2238,17 @@ run (void *cls, "emergencies_risk_by_amount", TALER_JSON_from_amount ( &reported_emergency_risk_by_amount), - /* Tested in test-auditor.sh #4/#5/#6/#7/#13 */ + /* Tested in test-auditor.sh #4/#5/#6/#13/#26 */ "bad_sig_losses", report_bad_sig_losses, - /* Tested in test-auditor.sh #4/#5/#6/#7/#13 */ + /* Tested in test-auditor.sh #4/#5/#6/#13/#26 */ "total_bad_sig_loss", TALER_JSON_from_amount (&total_bad_sig_loss), - /* Tested in test-auditor.sh #14/#15 */ + /* FIXME: Tested in test-auditor.sh #?? */ "row_inconsistencies", report_row_inconsistencies, /* Block #3 */ + /* Tested in test-auditor.sh #18 */ "amount_arithmetic_inconsistencies", report_amount_arithmetic_inconsistencies, "total_arithmetic_delta_plus", @@ -2308,12 +2309,12 @@ run (void *cls, (json_int_t) ppc.last_recoup_serial_id, "end_ppc_recoup_refresh_serial_id", (json_int_t) ppc.last_recoup_refresh_serial_id, - "auditor_start_time", json_string ( - GNUNET_STRINGS_absolute_time_to_string ( - start_time)), - "auditor_end_time", json_string ( - GNUNET_STRINGS_absolute_time_to_string ( - GNUNET_TIME_absolute_get ())), + "auditor_start_time", + TALER_ARL_json_from_time_abs ( + start_time), + "auditor_end_time", + TALER_ARL_json_from_time_abs ( + GNUNET_TIME_absolute_get ()), "total_irregular_recoups", TALER_JSON_from_amount ( &total_irregular_recoups) diff --git a/src/auditor/taler-helper-auditor-deposits.c b/src/auditor/taler-helper-auditor-deposits.c index eb3e0e7a3..00042159c 100644 --- a/src/auditor/taler-helper-auditor-deposits.c +++ b/src/auditor/taler-helper-auditor-deposits.c @@ -303,14 +303,20 @@ run (void *cls, { json_t *report; - report = json_pack ("{s:o, s:o, s:I}", + report = json_pack ("{s:o, s:I, s:o, s:o, s:o}", "deposit_confirmation_inconsistencies", report_deposit_confirmation_inconsistencies, "missing_deposit_confirmation_count", (json_int_t) number_missed_deposit_confirmations, "missing_deposit_confirmation_total", TALER_JSON_from_amount ( - &total_missed_deposit_confirmations) + &total_missed_deposit_confirmations), + "auditor_start_time", + TALER_ARL_json_from_time_abs ( + start_time), + "auditor_end_time", + TALER_ARL_json_from_time_abs ( + GNUNET_TIME_absolute_get ()) ); GNUNET_break (NULL != report); TALER_ARL_done (report); diff --git a/src/auditor/taler-helper-auditor-reserves.c b/src/auditor/taler-helper-auditor-reserves.c index cd0f1b98b..335eb899e 100644 --- a/src/auditor/taler-helper-auditor-reserves.c +++ b/src/auditor/taler-helper-auditor-reserves.c @@ -1449,19 +1449,19 @@ run (void *cls, GNUNET_log (GNUNET_ERROR_TYPE_DEBUG, "Launching auditor\n"); if (GNUNET_OK != - TALER_ARL_init (TALER_ARL_cfg)) + TALER_ARL_init (c)) { global_ret = 1; return; } if (GNUNET_OK != GNUNET_CONFIGURATION_get_value_time (TALER_ARL_cfg, - "exchangTALER_ARL_edb", + "exchangedb", "IDLE_RESERVE_EXPIRATION_TIME", &idle_reserve_expiration_time)) { GNUNET_log_config_missing (GNUNET_ERROR_TYPE_ERROR, - "exchangTALER_ARL_edb", + "exchangedb", "IDLE_RESERVE_EXPIRATION_TIME"); global_ret = 1; return; @@ -1564,14 +1564,14 @@ run (void *cls, "total_balance_reserve_not_closed", TALER_JSON_from_amount ( &total_balance_reserve_not_closed), - /* Tested in test-auditor.sh #4/#5/#6/#7/#13 */ + /* Tested in test-auditor.sh #7 */ "bad_sig_losses", report_bad_sig_losses, /* blocks #3 */ - /* Tested in test-auditor.sh #4/#5/#6/#7/#13 */ + /* Tested in test-auditor.sh #7 */ "total_bad_sig_loss", TALER_JSON_from_amount (&total_bad_sig_loss), - /* Tested in test-auditor.sh #14/#15 */ + /* FIXME: Tested in test-auditor.sh #?? */ "row_inconsistencies", report_row_inconsistencies, /* Tested in test-auditor.sh #23 */ diff --git a/src/auditor/test-auditor.sh b/src/auditor/test-auditor.sh index 236a11519..0f76608b7 100755 --- a/src/auditor/test-auditor.sh +++ b/src/auditor/test-auditor.sh @@ -79,15 +79,35 @@ function pre_audit () { function audit_only () { # Run the auditor! echo -n "Running audit(s) ..." + + # NOTE: this should be removed soon... $VALGRIND taler-auditor -L DEBUG -r -c $CONF -m $MASTER_PUB > test-audit.json 2> test-audit.log || exit_fail "auditor failed" echo -n "." # Also do incremental run $VALGRIND taler-auditor -L DEBUG -c $CONF -m $MASTER_PUB > test-audit-inc.json 2> test-audit-inc.log || exit_fail "auditor failed" echo -n "." - $VALGRIND taler-helper-auditor-wire -L DEBUG -r -c $CONF -m $MASTER_PUB > test-wire-audit.json 2> test-wire-audit.log || exit_fail "wire auditor failed" - # Also do incremental run + + $VALGRIND taler-helper-auditor-aggregation -L DEBUG -r -c $CONF -m $MASTER_PUB > test-audit-aggregation.json 2> test-audit-aggregation.log || exit_fail "aggregation audit failed" + echo -n "." + $VALGRIND taler-helper-auditor-aggregation -L DEBUG -c $CONF -m $MASTER_PUB > test-audit-aggregation-inc.json 2> test-audit-aggregation-inc.log || exit_fail "incremental aggregation audit failed" + echo -n "." + $VALGRIND taler-helper-auditor-coins -L DEBUG -r -c $CONF -m $MASTER_PUB > test-audit-coins.json 2> test-audit-coins.log || exit_fail "coin audit failed" + echo -n "." + $VALGRIND taler-helper-auditor-coins -L DEBUG -c $CONF -m $MASTER_PUB > test-audit-coins-inc.json 2> test-audit-coins-inc.log || exit_fail "incremental coin audit failed" + echo -n "." + $VALGRIND taler-helper-auditor-deposits -L DEBUG -r -c $CONF -m $MASTER_PUB > test-audit-deposits.json 2> test-audit-deposits.log || exit_fail "deposits audit failed" + echo -n "." + $VALGRIND taler-helper-auditor-deposits -L DEBUG -c $CONF -m $MASTER_PUB > test-audit-deposits-inc.json 2> test-audit-deposits-inc.log || exit_fail "incremental deposits audit failed" echo -n "." - $VALGRIND taler-helper-auditor-wire -L DEBUG -c $CONF -m $MASTER_PUB > test-wire-audit-inc.json 2> test-wire-audit-inc.log || exit_fail "wire auditor failed" + $VALGRIND taler-helper-auditor-reserves -L DEBUG -r -c $CONF -m $MASTER_PUB > test-audit-reserves.json 2> test-audit-reserves.log || exit_fail "reserves audit failed" + echo -n "." + $VALGRIND taler-helper-auditor-reserves -L DEBUG -c $CONF -m $MASTER_PUB > test-audit-reserves-inc.json 2> test-audit-reserves-inc.log || exit_fail "incremental reserves audit failed" + echo -n "." + $VALGRIND taler-helper-auditor-wire -L DEBUG -r -c $CONF -m $MASTER_PUB > test-audit-wire.json 2> test-wire-audit.log || exit_fail "wire audit failed" + echo -n "." + $VALGRIND taler-helper-auditor-wire -L DEBUG -c $CONF -m $MASTER_PUB > test-audit-wire-inc.json 2> test-wire-audit-inc.log || exit_fail "wire audit failed" + echo -n "." + echo " DONE" } @@ -99,7 +119,7 @@ function post_audit () { wait echo "DONE" echo -n "TeXing ." - ../../contrib/render.py test-audit.json test-wire-audit.json < ../../contrib/auditor-report.tex.j2 > test-report.tex || exit_fail "Renderer failed" + ../../contrib/render.py test-audit.json test-audit-wire.json test-audit-aggregation.json test-audit-coins.json test-audit-deposits.json test-audit-reserves.json < ../../contrib/auditor-report.tex.j2 > test-report.tex || exit_fail "Renderer failed" echo -n "." timeout 10 pdflatex test-report.tex >/dev/null || exit_fail "pdflatex failed" @@ -141,21 +161,21 @@ run_audit aggregator echo "Checking output" # if an emergency was detected, that is a bug and we should fail echo -n "Test for emergencies... " -jq -e .emergencies[0] < test-audit.json > /dev/null && exit_fail "Unexpected emergency detected in ordinary run" || echo PASS +jq -e .emergencies[0] < test-audit-coins.json > /dev/null && exit_fail "Unexpected emergency detected in ordinary run" || echo PASS echo -n "Test for deposit confirmation emergencies... " -jq -e .deposit_confirmation_inconsistencies[0] < test-audit.json > /dev/null && exit_fail "Unexpected deposit confirmation inconsistency detected" || echo PASS +jq -e .deposit_confirmation_inconsistencies[0] < test-audit-deposits.json > /dev/null && exit_fail "Unexpected deposit confirmation inconsistency detected" || echo PASS echo -n "Test for emergencies by count... " -jq -e .emergencies_by_count[0] < test-audit.json > /dev/null && exit_fail "Unexpected emergency by count detected in ordinary run" || echo PASS +jq -e .emergencies_by_count[0] < test-audit-coins.json > /dev/null && exit_fail "Unexpected emergency by count detected in ordinary run" || echo PASS echo -n "Test for wire inconsistencies... " -jq -e .wire_out_amount_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected wire out inconsistency detected in ordinary run" -jq -e .reserve_in_amount_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected reserve in inconsistency detected in ordinary run" -jq -e .missattribution_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected missattribution inconsistency detected in ordinary run" -jq -e .row_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected row inconsistency detected in ordinary run" -jq -e .denomination_key_validity_withdraw_inconsistencies[0] < test-audit.json > /dev/null && exit_fail "Unexpected denomination key withdraw inconsistency detected in ordinary run" -jq -e .row_minor_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected minor row inconsistency detected in ordinary run" -jq -e .lag_details[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected lag detected in ordinary run" -jq -e .wire_format_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected wire format inconsistencies detected in ordinary run" +jq -e .wire_out_amount_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected wire out inconsistency detected in ordinary run" +jq -e .reserve_in_amount_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected reserve in inconsistency detected in ordinary run" +jq -e .missattribution_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected missattribution inconsistency detected in ordinary run" +jq -e .row_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected row inconsistency detected in ordinary run" +jq -e .denomination_key_validity_withdraw_inconsistencies[0] < test-audit-reserves.json > /dev/null && exit_fail "Unexpected denomination key withdraw inconsistency detected in ordinary run" +jq -e .row_minor_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected minor row inconsistency detected in ordinary run" +jq -e .lag_details[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected lag detected in ordinary run" +jq -e .wire_format_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected wire format inconsistencies detected in ordinary run" # TODO: check operation balances are correct (once we have all transaction types and wallet is deterministic) @@ -163,34 +183,44 @@ jq -e .wire_format_inconsistencies[0] < test-wire-audit.json > /dev/null && exit echo PASS -LOSS=`jq -r .total_bad_sig_loss < test-audit.json` +LOSS=`jq -r .total_bad_sig_loss < test-audit-aggregation.json` +if test $LOSS != "TESTKUDOS:0" +then + exit_fail "Wrong total bad sig loss from aggregation, got unexpected loss of $LOSS" +fi +LOSS=`jq -r .total_bad_sig_loss < test-audit-coins.json` if test $LOSS != "TESTKUDOS:0" then - exit_fail "Wrong total bad sig loss, got unexpected loss of $LOSS" + exit_fail "Wrong total bad sig loss from coins, got unexpected loss of $LOSS" +fi +LOSS=`jq -r .total_bad_sig_loss < test-audit-reserves.json` +if test $LOSS != "TESTKUDOS:0" +then + exit_fail "Wrong total bad sig loss from reserves, got unexpected loss of $LOSS" fi echo -n "Test for wire amounts... " -WIRED=`jq -r .total_wire_in_delta_plus < test-wire-audit.json` +WIRED=`jq -r .total_wire_in_delta_plus < test-audit-wire.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total wire delta plus wrong, got $WIRED" fi -WIRED=`jq -r .total_wire_in_delta_minus < test-wire-audit.json` +WIRED=`jq -r .total_wire_in_delta_minus < test-audit-wire.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total wire delta minus wrong, got $WIRED" fi -WIRED=`jq -r .total_wire_out_delta_plus < test-wire-audit.json` +WIRED=`jq -r .total_wire_out_delta_plus < test-audit-wire.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total wire delta plus wrong, got $WIRED" fi -WIRED=`jq -r .total_wire_out_delta_minus < test-wire-audit.json` +WIRED=`jq -r .total_wire_out_delta_minus < test-audit-wire.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total wire delta minus wrong, got $WIRED" fi -WIRED=`jq -r .total_missattribution_in < test-wire-audit.json` +WIRED=`jq -r .total_missattribution_in < test-audit-wire.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total missattribution in wrong, got $WIRED" @@ -198,22 +228,44 @@ fi echo PASS echo -n "Checking for unexpected arithmetic differences " -LOSS=`jq -r .total_arithmetic_delta_plus < test-audit.json` +LOSS=`jq -r .total_arithmetic_delta_plus < test-audit-aggregation.json` +if test $LOSS != "TESTKUDOS:0" +then + exit_fail "Wrong arithmetic delta from aggregations, got unexpected plus of $LOSS" +fi +LOSS=`jq -r .total_arithmetic_delta_minus < test-audit-aggregation.json` +if test $LOSS != "TESTKUDOS:0" +then + exit_fail "Wrong arithmetic delta from aggregation, got unexpected minus of $LOSS" +fi +LOSS=`jq -r .total_arithmetic_delta_plus < test-audit-coins.json` +if test $LOSS != "TESTKUDOS:0" +then + exit_fail "Wrong arithmetic delta from coins, got unexpected plus of $LOSS" +fi +LOSS=`jq -r .total_arithmetic_delta_minus < test-audit-coins.json` +if test $LOSS != "TESTKUDOS:0" +then + exit_fail "Wrong arithmetic delta from coins, got unexpected minus of $LOSS" +fi +LOSS=`jq -r .total_arithmetic_delta_plus < test-audit-reserves.json` if test $LOSS != "TESTKUDOS:0" then - exit_fail "Wrong arithmetic delta, got unexpected plus of $LOSS" + exit_fail "Wrong arithmetic delta from reserves, got unexpected plus of $LOSS" fi -LOSS=`jq -r .total_arithmetic_delta_minus < test-audit.json` +LOSS=`jq -r .total_arithmetic_delta_minus < test-audit-reserves.json` if test $LOSS != "TESTKUDOS:0" then - exit_fail "Wrong arithmetic delta, got unexpected minus of $LOSS" + exit_fail "Wrong arithmetic delta from reserves, got unexpected minus of $LOSS" fi -jq -e .amount_arithmetic_inconsistencies[0] < test-audit.json > /dev/null && exit_fail "Unexpected arithmetic inconsistencies detected in ordinary run" +jq -e .amount_arithmetic_inconsistencies[0] < test-audit-aggregation.json > /dev/null && exit_fail "Unexpected arithmetic inconsistencies from aggregations detected in ordinary run" +jq -e .amount_arithmetic_inconsistencies[0] < test-audit-coins.json > /dev/null && exit_fail "Unexpected arithmetic inconsistencies from coins detected in ordinary run" +jq -e .amount_arithmetic_inconsistencies[0] < test-audit-reserves.json > /dev/null && exit_fail "Unexpected arithmetic inconsistencies from reserves detected in ordinary run" echo PASS echo -n "Checking for unexpected wire out differences " -jq -e .wire_out_inconsistencies[0] < test-audit.json > /dev/null && exit_fail "Unexpected wire out inconsistencies detected in ordinary run" +jq -e .wire_out_inconsistencies[0] < test-audit-aggregation.json > /dev/null && exit_fail "Unexpected wire out inconsistencies detected in ordinary run" echo PASS # cannot easily undo aggregator, hence full reload @@ -232,17 +284,17 @@ run_audit echo "Checking output" # if an emergency was detected, that is a bug and we should fail echo -n "Test for emergencies... " -jq -e .emergencies[0] < test-audit.json > /dev/null && exit_fail "Unexpected emergency detected in ordinary run" || echo PASS +jq -e .emergencies[0] < test-audit-coins.json > /dev/null && exit_fail "Unexpected emergency detected in ordinary run" || echo PASS echo -n "Test for emergencies by count... " -jq -e .emergencies_by_count[0] < test-audit.json > /dev/null && exit_fail "Unexpected emergency by count detected in ordinary run" || echo PASS +jq -e .emergencies_by_count[0] < test-audit-coins.json > /dev/null && exit_fail "Unexpected emergency by count detected in ordinary run" || echo PASS echo -n "Test for wire inconsistencies... " -jq -e .wire_out_amount_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected wire out inconsistency detected in ordinary run" -jq -e .reserve_in_amount_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected reserve in inconsistency detected in ordinary run" -jq -e .missattribution_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected missattribution inconsistency detected in ordinary run" -jq -e .row_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected row inconsistency detected in ordinary run" -jq -e .row_minor_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected minor row inconsistency detected in ordinary run" -jq -e .wire_format_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected wire format inconsistencies detected in ordinary run" +jq -e .wire_out_amount_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected wire out inconsistency detected in ordinary run" +jq -e .reserve_in_amount_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected reserve in inconsistency detected in ordinary run" +jq -e .missattribution_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected missattribution inconsistency detected in ordinary run" +jq -e .row_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected row inconsistency detected in ordinary run" +jq -e .row_minor_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected minor row inconsistency detected in ordinary run" +jq -e .wire_format_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected wire format inconsistencies detected in ordinary run" # TODO: check operation balances are correct (once we have all transaction types and wallet is deterministic) # TODO: check revenue summaries are correct (once we have all transaction types and wallet is deterministic) @@ -258,9 +310,9 @@ echo -n "Check for lag detection... " # taler-helper-auditor-wire.c) if [ $DATABASE_AGE -gt 3600 ] then - jq -e .lag_details[0] < test-wire-audit.json > /dev/null || exit_fail "Lag not detected in run without aggregator at age $DELTA" + jq -e .lag_details[0] < test-audit-wire.json > /dev/null || exit_fail "Lag not detected in run without aggregator at age $DELTA" - LAG=`jq -r .total_amount_lag < test-wire-audit.json` + LAG=`jq -r .total_amount_lag < test-audit-wire.json` if test $LAG = "TESTKUDOS:0" then exit_fail "Expected total lag to be non-zero" @@ -272,27 +324,27 @@ fi echo -n "Test for wire amounts... " -WIRED=`jq -r .total_wire_in_delta_plus < test-wire-audit.json` +WIRED=`jq -r .total_wire_in_delta_plus < test-audit-wire.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total wire delta plus wrong, got $WIRED" fi -WIRED=`jq -r .total_wire_in_delta_minus < test-wire-audit.json` +WIRED=`jq -r .total_wire_in_delta_minus < test-audit-wire.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total wire delta minus wrong, got $WIRED" fi -WIRED=`jq -r .total_wire_out_delta_plus < test-wire-audit.json` +WIRED=`jq -r .total_wire_out_delta_plus < test-audit-wire.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total wire delta plus wrong, got $WIRED" fi -WIRED=`jq -r .total_wire_out_delta_minus < test-wire-audit.json` +WIRED=`jq -r .total_wire_out_delta_minus < test-audit-wire.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total wire delta minus wrong, got $WIRED" fi -WIRED=`jq -r .total_missattribution_in < test-wire-audit.json` +WIRED=`jq -r .total_missattribution_in < test-audit-wire.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total missattribution in wrong, got $WIRED" @@ -311,28 +363,28 @@ echo "UPDATE reserves_in SET credit_val=5 WHERE reserve_in_serial_id=1" | psql - run_audit echo -n "Testing inconsistency detection... " -ROW=`jq .reserve_in_amount_inconsistencies[0].row < test-wire-audit.json` +ROW=`jq .reserve_in_amount_inconsistencies[0].row < test-audit-wire.json` if test $ROW != 1 then exit_fail "Row wrong" fi -WIRED=`jq -r .reserve_in_amount_inconsistencies[0].amount_wired < test-wire-audit.json` +WIRED=`jq -r .reserve_in_amount_inconsistencies[0].amount_wired < test-audit-wire.json` if test $WIRED != "TESTKUDOS:10" then exit_fail "Amount wrong" fi -EXPECTED=`jq -r .reserve_in_amount_inconsistencies[0].amount_exchange_expected < test-wire-audit.json` +EXPECTED=`jq -r .reserve_in_amount_inconsistencies[0].amount_exchange_expected < test-audit-wire.json` if test $EXPECTED != "TESTKUDOS:5" then exit_fail "Expected amount wrong" fi -WIRED=`jq -r .total_wire_in_delta_minus < test-wire-audit.json` +WIRED=`jq -r .total_wire_in_delta_minus < test-audit-wire.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Wrong total wire_in_delta_minus, got $WIRED" fi -DELTA=`jq -r .total_wire_in_delta_plus < test-wire-audit.json` +DELTA=`jq -r .total_wire_in_delta_plus < test-audit-wire.json` if test $DELTA != "TESTKUDOS:5" then exit_fail "Expected total wire delta plus wrong, got $DELTA" @@ -354,49 +406,49 @@ echo "UPDATE reserves_in SET credit_val=15 WHERE reserve_in_serial_id=1" | psql run_audit -EXPECTED=`jq -r .reserve_balance_summary_wrong_inconsistencies[0].auditor < test-audit.json` +EXPECTED=`jq -r .reserve_balance_summary_wrong_inconsistencies[0].auditor < test-audit-reserves.json` if test $EXPECTED != "TESTKUDOS:5.01" then exit_fail "Expected reserve balance summary amount wrong, got $EXPECTED (auditor)" fi -EXPECTED=`jq -r .reserve_balance_summary_wrong_inconsistencies[0].exchange < test-audit.json` +EXPECTED=`jq -r .reserve_balance_summary_wrong_inconsistencies[0].exchange < test-audit-reserves.json` if test $EXPECTED != "TESTKUDOS:0.01" then exit_fail "Expected reserve balance summary amount wrong, got $EXPECTED (exchange)" fi -WIRED=`jq -r .total_loss_balance_insufficient < test-audit.json` +WIRED=`jq -r .total_loss_balance_insufficient < test-audit-reserves.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Wrong total loss from insufficient balance, got $WIRED" fi -ROW=`jq -e .reserve_in_amount_inconsistencies[0].row < test-wire-audit.json` +ROW=`jq -e .reserve_in_amount_inconsistencies[0].row < test-audit-wire.json` if test $ROW != 1 then exit_fail "Row wrong, got $ROW" fi -WIRED=`jq -r .reserve_in_amount_inconsistencies[0].amount_exchange_expected < test-wire-audit.json` +WIRED=`jq -r .reserve_in_amount_inconsistencies[0].amount_exchange_expected < test-audit-wire.json` if test $WIRED != "TESTKUDOS:15" then exit_fail "Wrong amount_exchange_expected, got $WIRED" fi -WIRED=`jq -r .reserve_in_amount_inconsistencies[0].amount_wired < test-wire-audit.json` +WIRED=`jq -r .reserve_in_amount_inconsistencies[0].amount_wired < test-audit-wire.json` if test $WIRED != "TESTKUDOS:10" then exit_fail "Wrong amount_wired, got $WIRED" fi -WIRED=`jq -r .total_wire_in_delta_minus < test-wire-audit.json` +WIRED=`jq -r .total_wire_in_delta_minus < test-audit-wire.json` if test $WIRED != "TESTKUDOS:5" then exit_fail "Wrong total wire_in_delta_minus, got $WIRED" fi -WIRED=`jq -r .total_wire_in_delta_plus < test-wire-audit.json` +WIRED=`jq -r .total_wire_in_delta_plus < test-audit-wire.json` if test $WIRED != "TESTKUDOS:0" then exit_fail "Wrong total wire_in_delta_plus, got $WIRED" @@ -422,27 +474,27 @@ run_audit echo -n "Testing inconsistency detection... " -jq -e .bad_sig_losses[0] < test-audit.json > /dev/null || exit_fail "Bad signature not detected" +jq -e .bad_sig_losses[0] < test-audit-coins.json > /dev/null || exit_fail "Bad signature not detected" -ROW=`jq -e .bad_sig_losses[0].row < test-audit.json` +ROW=`jq -e .bad_sig_losses[0].row < test-audit-coins.json` if test $ROW != ${SERIAL} then exit_fail "Row wrong, got $ROW" fi -LOSS=`jq -r .bad_sig_losses[0].loss < test-audit.json` +LOSS=`jq -r .bad_sig_losses[0].loss < test-audit-coins.json` if test $LOSS != "TESTKUDOS:3" then exit_fail "Wrong deposit bad signature loss, got $LOSS" fi -OP=`jq -r .bad_sig_losses[0].operation < test-audit.json` +OP=`jq -r .bad_sig_losses[0].operation < test-audit-coins.json` if test $OP != "deposit" then exit_fail "Wrong operation, got $OP" fi -LOSS=`jq -r .total_bad_sig_loss < test-audit.json` +LOSS=`jq -r .total_bad_sig_loss < test-audit-coins.json` if test $LOSS != "TESTKUDOS:3" then exit_fail "Wrong total bad sig loss, got $LOSS" @@ -468,25 +520,25 @@ echo "UPDATE deposits SET h_contract_terms='\x12bb676444955c98789f219148aa31899d run_audit echo -n "Checking bad signature detection... " -ROW=`jq -e .bad_sig_losses[0].row < test-audit.json` +ROW=`jq -e .bad_sig_losses[0].row < test-audit-coins.json` if test $ROW != $SERIAL then exit_fail "Row wrong, got $ROW" fi -LOSS=`jq -r .bad_sig_losses[0].loss < test-audit.json` +LOSS=`jq -r .bad_sig_losses[0].loss < test-audit-coins.json` if test $LOSS != "TESTKUDOS:3" then exit_fail "Wrong deposit bad signature loss, got $LOSS" fi -OP=`jq -r .bad_sig_losses[0].operation < test-audit.json` +OP=`jq -r .bad_sig_losses[0].operation < test-audit-coins.json` if test $OP != "deposit" then exit_fail "Wrong operation, got $OP" fi -LOSS=`jq -r .total_bad_sig_loss < test-audit.json` +LOSS=`jq -r .total_bad_sig_loss < test-audit-coins.json` if test $LOSS != "TESTKUDOS:3" then exit_fail "Wrong total bad sig loss, got $LOSS" @@ -510,25 +562,25 @@ echo "UPDATE known_coins SET denom_sig='\x287369672d76616c200a2028727361200a2020 run_audit -ROW=`jq -e .bad_sig_losses[0].row < test-audit.json` +ROW=`jq -e .bad_sig_losses[0].row < test-audit-coins.json` if test $ROW != "-1" then exit_fail "Row wrong, got $ROW" fi -LOSS=`jq -r .bad_sig_losses[0].loss < test-audit.json` +LOSS=`jq -r .bad_sig_losses[0].loss < test-audit-coins.json` if test $LOSS == "TESTKUDOS:0" then exit_fail "Wrong deposit bad signature loss, got $LOSS" fi -OP=`jq -r .bad_sig_losses[0].operation < test-audit.json` +OP=`jq -r .bad_sig_losses[0].operation < test-audit-coins.json` if test $OP != "known-coin" then exit_fail "Wrong operation, got $OP" fi -LOSS=`jq -r .total_bad_sig_loss < test-audit.json` +LOSS=`jq -r .total_bad_sig_loss < test-audit-coins.json` if test $LOSS == "TESTKUDOS:0" then exit_fail "Wrong total bad sig loss, got $LOSS" @@ -555,14 +607,14 @@ echo "UPDATE reserves_out SET reserve_sig='\x9ef381a84aff252646a157d88eded50f708 run_audit -OP=`jq -r .bad_sig_losses[0].operation < test-audit.json` +OP=`jq -r .bad_sig_losses[0].operation < test-audit-reserves.json` if test $OP != "withdraw" then exit_fail "Wrong operation, got $OP" fi -LOSS=`jq -r .bad_sig_losses[0].loss < test-audit.json` -LOSS_TOTAL=`jq -r .total_bad_sig_loss < test-audit.json` +LOSS=`jq -r .bad_sig_losses[0].loss < test-audit-reserves.json` +LOSS_TOTAL=`jq -r .total_bad_sig_loss < test-audit-reserves.json` if test $LOSS != $LOSS_TOTAL then exit_fail "Expected loss $LOSS and total loss $LOSS_TOTAL do not match" @@ -604,17 +656,17 @@ echo "UPDATE app_banktransaction SET subject='$NEW_WTID' WHERE id='$OLD_ID';" | run_audit echo -n "Testing inconsistency detection... " -DIAG=`jq -r .reserve_in_amount_inconsistencies[0].diagnostic < test-wire-audit.json` +DIAG=`jq -r .reserve_in_amount_inconsistencies[0].diagnostic < test-audit-wire.json` if test "x$DIAG" != "xwire subject does not match" then exit_fail "Diagnostic wrong: $DIAG (0)" fi -WTID=`jq -r .reserve_in_amount_inconsistencies[0].reserve_pub < test-wire-audit.json` +WTID=`jq -r .reserve_in_amount_inconsistencies[0].reserve_pub < test-audit-wire.json` if test x$WTID != x"$OLD_WTID" -a x$WTID != x"$NEW_WTID" then exit_fail "WTID reported wrong: $WTID" fi -EX_A=`jq -r .reserve_in_amount_inconsistencies[0].amount_exchange_expected < test-wire-audit.json` +EX_A=`jq -r .reserve_in_amount_inconsistencies[0].amount_exchange_expected < test-audit-wire.json` if test x$WTID = x$OLD_WTID -a x$EX_A != x"TESTKUDOS:10" then exit_fail "Amount reported wrong: $EX_A" @@ -623,17 +675,17 @@ if test x$WTID = x$NEW_WTID -a x$EX_A != x"TESTKUDOS:0" then exit_fail "Amount reported wrong: $EX_A" fi -DIAG=`jq -r .reserve_in_amount_inconsistencies[1].diagnostic < test-wire-audit.json` +DIAG=`jq -r .reserve_in_amount_inconsistencies[1].diagnostic < test-audit-wire.json` if test "x$DIAG" != "xwire subject does not match" then exit_fail "Diagnostic wrong: $DIAG (1)" fi -WTID=`jq -r .reserve_in_amount_inconsistencies[1].reserve_pub < test-wire-audit.json` +WTID=`jq -r .reserve_in_amount_inconsistencies[1].reserve_pub < test-audit-wire.json` if test $WTID != "$OLD_WTID" -a $WTID != "$NEW_WTID" then exit_fail "WTID reported wrong: $WTID (wanted: $NEW_WTID or $OLD_WTID)" fi -EX_A=`jq -r .reserve_in_amount_inconsistencies[1].amount_exchange_expected < test-wire-audit.json` +EX_A=`jq -r .reserve_in_amount_inconsistencies[1].amount_exchange_expected < test-audit-wire.json` if test $WTID = "$OLD_WTID" -a $EX_A != "TESTKUDOS:10" then exit_fail "Amount reported wrong: $EX_A" @@ -643,12 +695,12 @@ then exit_fail "Amount reported wrong: $EX_A" fi -WIRED=`jq -r .total_wire_in_delta_minus < test-wire-audit.json` +WIRED=`jq -r .total_wire_in_delta_minus < test-audit-wire.json` if test $WIRED != "TESTKUDOS:10" then exit_fail "Wrong total wire_in_delta_minus, got $WIRED" fi -DELTA=`jq -r .total_wire_in_delta_plus < test-wire-audit.json` +DELTA=`jq -r .total_wire_in_delta_plus < test-audit-wire.json` if test $DELTA != "TESTKUDOS:10" then exit_fail "Expected total wire delta plus wrong, got $DELTA" @@ -673,12 +725,12 @@ echo "UPDATE app_banktransaction SET debit_account_id=1 WHERE id='$OLD_ID';" | p run_audit echo -n "Testing inconsistency detection... " -AMOUNT=`jq -r .missattribution_in_inconsistencies[0].amount < test-wire-audit.json` +AMOUNT=`jq -r .missattribution_in_inconsistencies[0].amount < test-audit-wire.json` if test "x$AMOUNT" != "xTESTKUDOS:10" then exit_fail "Reported amount wrong: $AMOUNT" fi -AMOUNT=`jq -r .total_missattribution_in < test-wire-audit.json` +AMOUNT=`jq -r .total_missattribution_in < test-audit-wire.json` if test "x$AMOUNT" != "xTESTKUDOS:10" then exit_fail "Reported total amount wrong: $AMOUNT" @@ -702,12 +754,12 @@ echo "UPDATE app_banktransaction SET date=NOW() WHERE id=$OLD_ID;" | psql -Aqt $ run_audit echo -n "Testing inconsistency detection... " -DIAG=`jq -r .row_minor_inconsistencies[0].diagnostic < test-wire-audit.json` +DIAG=`jq -r .row_minor_inconsistencies[0].diagnostic < test-audit-wire.json` if test "x$DIAG" != "xexecution date mismatch" then exit_fail "Reported diagnostic wrong: $DIAG" fi -TABLE=`jq -r .row_minor_inconsistencies[0].table < test-wire-audit.json` +TABLE=`jq -r .row_minor_inconsistencies[0].table < test-audit-wire.json` if test "x$TABLE" != "xreserves_in" then exit_fail "Reported table wrong: $TABLE" @@ -737,27 +789,27 @@ echo -e "UPDATE app_banktransaction SET debit_account_id=2,credit_account_id=1,s run_audit echo -n "Testing inconsistency detection... " -AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_wired < test-wire-audit.json` +AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_wired < test-audit-wire.json` if test "x$AMOUNT" != "xTESTKUDOS:10" then exit_fail "Reported wired amount wrong: $AMOUNT" fi -AMOUNT=`jq -r .total_wire_out_delta_plus < test-wire-audit.json` +AMOUNT=`jq -r .total_wire_out_delta_plus < test-audit-wire.json` if test "x$AMOUNT" != "xTESTKUDOS:10" then exit_fail "Reported total plus amount wrong: $AMOUNT" fi -AMOUNT=`jq -r .total_wire_out_delta_minus < test-wire-audit.json` +AMOUNT=`jq -r .total_wire_out_delta_minus < test-audit-wire.json` if test "x$AMOUNT" != "xTESTKUDOS:0" then exit_fail "Reported total minus amount wrong: $AMOUNT" fi -AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_justified < test-wire-audit.json` +AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_justified < test-audit-wire.json` if test "x$AMOUNT" != "xTESTKUDOS:0" then exit_fail "Reported justified amount wrong: $AMOUNT" fi -DIAG=`jq -r .wire_out_amount_inconsistencies[0].diagnostic < test-wire-audit.json` +DIAG=`jq -r .wire_out_amount_inconsistencies[0].diagnostic < test-audit-wire.json` if test "x$DIAG" != "xjustification for wire transfer not found" then exit_fail "Reported diagnostic wrong: $DIAG" @@ -781,8 +833,8 @@ run_audit echo -n "Testing hung refresh detection... " -HANG=`jq -er .refresh_hanging[0].amount < test-audit.json` -TOTAL_HANG=`jq -er .total_refresh_hanging < test-audit.json` +HANG=`jq -er .refresh_hanging[0].amount < test-audit-coins.json` +TOTAL_HANG=`jq -er .total_refresh_hanging < test-audit-coins.json` if test x$HANG = TESTKUDOS:0 then exit_fail "Hanging amount zero" @@ -815,14 +867,14 @@ run_audit echo -n "Testing inconsistency detection... " -OP=`jq -er .bad_sig_losses[0].operation < test-audit.json` +OP=`jq -er .bad_sig_losses[0].operation < test-audit-coins.json` if test x$OP != xmelt then exit_fail "Operation wrong, got $OP" fi -LOSS=`jq -er .bad_sig_losses[0].loss < test-audit.json` -TOTAL_LOSS=`jq -er .total_bad_sig_loss < test-audit.json` +LOSS=`jq -er .bad_sig_losses[0].loss < test-audit-coins.json` +TOTAL_LOSS=`jq -er .total_bad_sig_loss < test-audit-coins.json` if test x$LOSS != x$TOTAL_LOSS then exit_fail "Loss inconsistent, got $LOSS and $TOTAL_LOSS" @@ -861,12 +913,12 @@ then post_audit echo -n "Testing inconsistency detection... " - TABLE=`jq -r .row_inconsistencies[0].table < test-audit.json` + TABLE=`jq -r .row_inconsistencies[0].table < test-audit-aggregation.json` if test "x$TABLE" != "xwire-fee" then exit_fail "Reported table wrong: $TABLE" fi - DIAG=`jq -r .row_inconsistencies[0].diagnostic < test-audit.json` + DIAG=`jq -r .row_inconsistencies[0].diagnostic < test-audit-aggregation.json` if test "x$DIAG" != "xwire fee signature invalid at given time" then exit_fail "Reported diagnostic wrong: $DIAG" @@ -906,7 +958,7 @@ then run_audit aggregator echo -n "Testing inconsistency detection... " - TABLE=`jq -r .row_inconsistencies[0].table < test-audit.json` + TABLE=`jq -r .row_inconsistencies[0].table < test-audit-aggregation.json` if test "x$TABLE" != "xaggregation" -a "x$TABLE" != "xdeposits" then exit_fail "Reported table wrong: $TABLE" @@ -950,22 +1002,22 @@ then echo -n "Testing inconsistency detection... " - AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_justified < test-wire-audit.json` + AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_justified < test-audit-wire.json` if test "x$AMOUNT" != "x$OLD_AMOUNT" then exit_fail "Reported justified amount wrong: $AMOUNT" fi - AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_wired < test-wire-audit.json` + AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_wired < test-audit-wire.json` if test "x$AMOUNT" != "x$NEW_AMOUNT" then exit_fail "Reported wired amount wrong: $AMOUNT" fi - TOTAL_AMOUNT=`jq -r .total_wire_out_delta_minus < test-wire-audit.json` + TOTAL_AMOUNT=`jq -r .total_wire_out_delta_minus < test-audit-wire.json` if test "x$TOTAL_AMOUNT" != "xTESTKUDOS:0" then exit_fail "Reported total wired amount minus wrong: $TOTAL_AMOUNT" fi - TOTAL_AMOUNT=`jq -r .total_wire_out_delta_plus < test-wire-audit.json` + TOTAL_AMOUNT=`jq -r .total_wire_out_delta_plus < test-audit-wire.json` if test "x$TOTAL_AMOUNT" = "xTESTKUDOS:0" then exit_fail "Reported total wired amount plus wrong: $TOTAL_AMOUNT" @@ -980,22 +1032,22 @@ then echo -n "Testing inconsistency detection... " - AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_justified < test-wire-audit.json` + AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_justified < test-audit-wire.json` if test "x$AMOUNT" != "x$OLD_AMOUNT" then exit_fail "Reported justified amount wrong: $AMOUNT" fi - AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_wired < test-wire-audit.json` + AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_wired < test-audit-wire.json` if test "x$AMOUNT" != "x$NEW_AMOUNT" then exit_fail "Reported wired amount wrong: $AMOUNT" fi - TOTAL_AMOUNT=`jq -r .total_wire_out_delta_minus < test-wire-audit.json` + TOTAL_AMOUNT=`jq -r .total_wire_out_delta_minus < test-audit-wire.json` if test "x$TOTAL_AMOUNT" != "x$OLD_AMOUNT" then exit_fail "Reported total wired amount minus wrong: $TOTAL_AMOUNT (wanted $OLD_AMOUNT)" fi - TOTAL_AMOUNT=`jq -r .total_wire_out_delta_plus < test-wire-audit.json` + TOTAL_AMOUNT=`jq -r .total_wire_out_delta_plus < test-audit-wire.json` if test "x$TOTAL_AMOUNT" != "xTESTKUDOS:0" then exit_fail "Reported total wired amount plus wrong: $TOTAL_AMOUNT" @@ -1044,12 +1096,12 @@ then post_audit echo -n "Testing inconsistency detection... " - TABLE=`jq -r .row_minor_inconsistencies[0].table < test-wire-audit.json` + TABLE=`jq -r .row_minor_inconsistencies[0].table < test-audit-wire.json` if test "x$TABLE" != "xwire_out" then exit_fail "Reported table wrong: $TABLE" fi - DIAG=`jq -r .row_minor_inconsistencies[0].diagnostic < test-wire-audit.json` + DIAG=`jq -r .row_minor_inconsistencies[0].diagnostic < test-audit-wire.json` DIAG=`echo "$DIAG" | awk '{print $1 " " $2 " " $3}'` if test "x$DIAG" != "xexecution date mismatch" then @@ -1079,22 +1131,22 @@ run_audit echo -n "Testing emergency detection... " -jq -e .reserve_balance_summary_wrong_inconsistencies[0] < test-audit.json > /dev/null || exit_fail "Reserve balance inconsistency not detected" +jq -e .reserve_balance_summary_wrong_inconsistencies[0] < test-audit-reserves.json > /dev/null || exit_fail "Reserve balance inconsistency not detected" -jq -e .emergencies[0] < test-audit.json > /dev/null || exit_fail "Emergency not detected" -jq -e .emergencies_by_count[0] < test-audit.json > /dev/null || exit_fail "Emergency by count not detected" -jq -e .amount_arithmetic_inconsistencies[0] < test-audit.json > /dev/null || exit_fail "Escrow balance calculation impossibility not detected" +jq -e .emergencies[0] < test-audit-coins.json > /dev/null || exit_fail "Emergency not detected" +jq -e .emergencies_by_count[0] < test-audit-coins.json > /dev/null || exit_fail "Emergency by count not detected" +jq -e .amount_arithmetic_inconsistencies[0] < test-audit-coins.json > /dev/null || exit_fail "Escrow balance calculation impossibility not detected" echo PASS echo -n "Testing loss calculation... " -AMOUNT=`jq -r .emergencies_loss < test-audit.json` +AMOUNT=`jq -r .emergencies_loss < test-audit-coins.json` if test "x$AMOUNT" == "xTESTKUDOS:0" then exit_fail "Reported amount wrong: $AMOUNT" fi -AMOUNT=`jq -r .emergencies_loss_by_count < test-audit.json` +AMOUNT=`jq -r .emergencies_loss_by_count < test-audit-coins.json` if test "x$AMOUNT" == "xTESTKUDOS:0" then exit_fail "Reported amount wrong: $AMOUNT" @@ -1135,12 +1187,12 @@ then echo -n "Testing reserve closure was done correctly... " - jq -e .reserve_not_closed_inconsistencies[0] < test-audit.json > /dev/null && exit_fail "Unexpected reserve not closed inconsistency detected" + jq -e .reserve_not_closed_inconsistencies[0] < test-audit-reserves.json > /dev/null && exit_fail "Unexpected reserve not closed inconsistency detected" echo "PASS" echo -n "Testing no bogus transfers detected... " - jq -e .wire_out_amount_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected wire out inconsistency detected in run with reserve closure" + jq -e .wire_out_amount_inconsistencies[0] < test-audit-wire.json > /dev/null && exit_fail "Unexpected wire out inconsistency detected in run with reserve closure" echo "PASS" @@ -1169,10 +1221,10 @@ echo "UPDATE reserves SET current_balance_val=100+current_balance_val WHERE rese run_audit echo -n "Testing reserve closure missing detected... " -jq -e .reserve_not_closed_inconsistencies[0] < test-audit.json > /dev/null || exit_fail "Reserve not closed inconsistency not detected" +jq -e .reserve_not_closed_inconsistencies[0] < test-audit-reserves.json > /dev/null || exit_fail "Reserve not closed inconsistency not detected" echo "PASS" -AMOUNT=`jq -r .total_balance_reserve_not_closed < test-audit.json` +AMOUNT=`jq -r .total_balance_reserve_not_closed < test-audit-reserves.json` if test "x$AMOUNT" == "xTESTKUDOS:0" then exit_fail "Reported total amount wrong: $AMOUNT" @@ -1220,14 +1272,14 @@ then echo -n "Testing lack of reserve closure transaction detected... " - jq -e .reserve_lag_details[0] < test-wire-audit.json > /dev/null || exit_fail "Reserve closure lag not detected" + jq -e .reserve_lag_details[0] < test-audit-wire.json > /dev/null || exit_fail "Reserve closure lag not detected" - AMOUNT=`jq -r .reserve_lag_details[0].amount < test-wire-audit.json` + AMOUNT=`jq -r .reserve_lag_details[0].amount < test-audit-wire.json` if test "x$AMOUNT" != "xTESTKUDOS:${VAL_DELTA}" then exit_fail "Reported total amount wrong: $AMOUNT" fi - AMOUNT=`jq -r .total_closure_amount_lag < test-wire-audit.json` + AMOUNT=`jq -r .total_closure_amount_lag < test-audit-wire.json` if test "x$AMOUNT" != "xTESTKUDOS:${VAL_DELTA}" then exit_fail "Reported total amount wrong: $AMOUNT" @@ -1260,7 +1312,7 @@ echo "UPDATE auditor_denominations SET expire_withdraw=${NEW_WEXP} WHERE denom_p run_audit echo -n "Testing inconsistency detection... " -jq -e .denomination_key_validity_withdraw_inconsistencies[0] < test-audit.json > /dev/null || exit_fail "Denomination key withdraw inconsistency not detected" +jq -e .denomination_key_validity_withdraw_inconsistencies[0] < test-audit-reserves.json > /dev/null || exit_fail "Denomination key withdraw inconsistency not detected" echo PASS @@ -1295,19 +1347,19 @@ then echo -n "Testing inconsistency detection... " - jq -e .wire_out_inconsistencies[0] < test-audit.json > /dev/null || exit_fail "Wire out inconsistency not detected" + jq -e .wire_out_inconsistencies[0] < test-audit-aggregation.json > /dev/null || exit_fail "Wire out inconsistency not detected" - ROW=`jq .wire_out_inconsistencies[0].rowid < test-audit.json` + ROW=`jq .wire_out_inconsistencies[0].rowid < test-audit-aggregation.json` if test $ROW != 1 then exit_fail "Row wrong" fi - AMOUNT=`jq -r .total_wire_out_delta_plus < test-audit.json` + AMOUNT=`jq -r .total_wire_out_delta_plus < test-audit-aggregation.json` if test "x$AMOUNT" != "xTESTKUDOS:0" then exit_fail "Reported amount wrong: $AMOUNT" fi - AMOUNT=`jq -r .total_wire_out_delta_minus < test-audit.json` + AMOUNT=`jq -r .total_wire_out_delta_minus < test-audit-aggregation.json` if test "x$AMOUNT" != "xTESTKUDOS:0.01" then exit_fail "Reported total amount wrong: $AMOUNT" @@ -1324,19 +1376,19 @@ then echo -n "Testing inconsistency detection... " - jq -e .wire_out_inconsistencies[0] < test-audit.json > /dev/null || exit_fail "Wire out inconsistency not detected" + jq -e .wire_out_inconsistencies[0] < test-audit-aggregation.json > /dev/null || exit_fail "Wire out inconsistency not detected" - ROW=`jq .wire_out_inconsistencies[0].rowid < test-audit.json` + ROW=`jq .wire_out_inconsistencies[0].rowid < test-audit-aggregation.json` if test $ROW != 1 then exit_fail "Row wrong" fi - AMOUNT=`jq -r .total_wire_out_delta_minus < test-audit.json` + AMOUNT=`jq -r .total_wire_out_delta_minus < test-audit-aggregation.json` if test "x$AMOUNT" != "xTESTKUDOS:0" then exit_fail "Reported amount wrong: $AMOUNT" fi - AMOUNT=`jq -r .total_wire_out_delta_plus < test-audit.json` + AMOUNT=`jq -r .total_wire_out_delta_plus < test-audit-aggregation.json` if test "x$AMOUNT" != "xTESTKUDOS:0.01" then exit_fail "Reported total amount wrong: $AMOUNT" @@ -1370,14 +1422,14 @@ else echo -n "Testing inconsistency detection... " - jq -e .deposit_confirmation_inconsistencies[0] < test-audit.json > /dev/null || exit_fail "Deposit confirmation inconsistency NOT detected" + jq -e .deposit_confirmation_inconsistencies[0] < test-audit-deposits.json > /dev/null || exit_fail "Deposit confirmation inconsistency NOT detected" - AMOUNT=`jq -er .missing_deposit_confirmation_total < test-audit.json` + AMOUNT=`jq -er .missing_deposit_confirmation_total < test-audit-deposits.json` if test x$AMOUNT = xTESTKUDOS:0 then exit_fail "Expected non-zero total missing deposit confirmation amount" fi - COUNT=`jq -er .missing_deposit_confirmation_count < test-audit.json` + COUNT=`jq -er .missing_deposit_confirmation_count < test-audit-deposits.json` if test x$AMOUNT = x0 then exit_fail "Expected non-zero total missing deposit confirmation count" @@ -1411,22 +1463,22 @@ then echo -n "Testing inconsistency detection... " - jq -e .coin_inconsistencies[0] < test-audit.json > /dev/null || exit_fail "Coin inconsistency NOT detected" + jq -e .coin_inconsistencies[0] < test-audit-aggregation.json > /dev/null || exit_fail "Coin inconsistency NOT detected" - jq -e .row_inconsistencies[0] < test-audit.json > /dev/null || exit_fail "Coin history verification failure NOT reported" + jq -e .row_inconsistencies[0] < test-audit-aggregation.json > /dev/null || exit_fail "Coin history verification failure NOT reported" # Note: if the wallet withdrew much more than it spent, this might indeed # go legitimately unnoticed. - jq -e .emergencies[0] < test-audit.json > /dev/null || exit_fail "Denomination value emergency NOT reported" + jq -e .emergencies[0] < test-audit-coins.json > /dev/null || exit_fail "Denomination value emergency NOT reported" - AMOUNT=`jq -er .total_coin_delta_minus < test-audit.json` + AMOUNT=`jq -er .total_coin_delta_minus < test-audit-aggregation.json` if test x$AMOUNT = xTESTKUDOS:0 then exit_fail "Expected non-zero total inconsistency amount from coins" fi # Note: if the wallet withdrew much more than it spent, this might indeed # go legitimately unnoticed. - COUNT=`jq -er .emergencies_risk_by_amount < test-audit.json` + COUNT=`jq -er .emergencies_risk_by_amount < test-audit-coins.json` if test x$AMOUNT = xTESTKUDOS:0 then exit_fail "Expected non-zero emergency-by-amount" @@ -1453,27 +1505,27 @@ run_audit echo -n "Testing inconsistency detection... " -jq -e .bad_sig_losses[0] < test-audit.json > /dev/null || exit_fail "Bad signature not detected" +jq -e .bad_sig_losses[0] < test-audit-coins.json > /dev/null || exit_fail "Bad signature not detected" -ROW=`jq -e .bad_sig_losses[0].row < test-audit.json` +ROW=`jq -e .bad_sig_losses[0].row < test-audit-coins.json` if test $ROW != ${SERIAL} then exit_fail "Row wrong, got $ROW" fi -LOSS=`jq -r .bad_sig_losses[0].loss < test-audit.json` +LOSS=`jq -r .bad_sig_losses[0].loss < test-audit-coins.json` if test $LOSS != "TESTKUDOS:3" then exit_fail "Wrong deposit bad signature loss, got $LOSS" fi -OP=`jq -r .bad_sig_losses[0].operation < test-audit.json` +OP=`jq -r .bad_sig_losses[0].operation < test-audit-coins.json` if test $OP != "deposit" then exit_fail "Wrong operation, got $OP" fi -LOSS=`jq -r .total_bad_sig_loss < test-audit.json` +LOSS=`jq -r .total_bad_sig_loss < test-audit-coins.json` if test $LOSS != "TESTKUDOS:3" then exit_fail "Wrong total bad sig loss, got $LOSS" @@ -1509,13 +1561,13 @@ then echo -n "Testing inconsistency detection... " - AMOUNT=`jq -r .wire_format_inconsistencies[0].amount < test-wire-audit.json` + AMOUNT=`jq -r .wire_format_inconsistencies[0].amount < test-audit-wire.json` if test "${AMOUNT}" != "TESTKUDOS:1" then exit_fail "Amount wrong, got ${AMOUNT}" fi - AMOUNT=`jq -r .total_wire_format_amount < test-wire-audit.json` + AMOUNT=`jq -r .total_wire_format_amount < test-audit-wire.json` if test "${AMOUNT}" != "TESTKUDOS:1" then exit_fail "Wrong total wire format amount, got $AMOUNT" -- cgit v1.2.3