From 21dba75362eda35fe6c706d68262e521dd2f91c1 Mon Sep 17 00:00:00 2001
From: Robby Workman <rw@rlworkman.net>
Date: Tue, 11 May 2010 22:26:19 +0200
Subject: system/apcupsd: Updated for version 3.14.4

---
 system/apcupsd/README             |  2 +-
 system/apcupsd/README-SLACKWARE   |  2 +-
 system/apcupsd/apcupsd.SlackBuild | 31 ++++++++++++++++++-------------
 system/apcupsd/apcupsd.info       |  8 ++++----
 system/apcupsd/doinst.sh          | 31 ++++++++++++-------------------
 system/apcupsd/slack-desc         |  2 +-
 6 files changed, 37 insertions(+), 39 deletions(-)

(limited to 'system')

diff --git a/system/apcupsd/README b/system/apcupsd/README
index 028579ed5eb9..a5aafec1fc4f 100644
--- a/system/apcupsd/README
+++ b/system/apcupsd/README
@@ -13,6 +13,6 @@ the distribution-specific installation to prevent messing with files outside
 DESTDIR; however, this does make it require some manual configuration after 
 installation.
 
-After installing, see /usr/doc/apcupsd-3.14.3/README-SLACKWARE for more
+After installing, see /usr/doc/apcupsd-3.14.4/README-SLACKWARE for more
 information on how to modify rc.6 and how to start the apcupsd daemon 
 automatically at boot.
diff --git a/system/apcupsd/README-SLACKWARE b/system/apcupsd/README-SLACKWARE
index f61c7ca3c910..9587d0e26be0 100644
--- a/system/apcupsd/README-SLACKWARE
+++ b/system/apcupsd/README-SLACKWARE
@@ -41,7 +41,7 @@ chose to comment out the original):
   # of seconds (see the apcupsd.conf file).  This is important for situations
   # where the mains power comes back before the UPS batteries are completely
   # dead.
-  if [ -f /etc/powerfail ]; then
+  if [ -f /etc/apcupsd/powerfail ]; then
     echo
     echo "apcupsd will now power off the UPS"
     echo
diff --git a/system/apcupsd/apcupsd.SlackBuild b/system/apcupsd/apcupsd.SlackBuild
index b0c7ff7b0292..af4edb58ae74 100644
--- a/system/apcupsd/apcupsd.SlackBuild
+++ b/system/apcupsd/apcupsd.SlackBuild
@@ -2,7 +2,7 @@
 
 # Slackware build script for apcupsd
 
-# Copyright 2006-2008  Robby Workman  (http://rlworkman.net)
+# Copyright 2006-2008  Robby Workman  Northport, Alabama, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,9 +23,9 @@
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PRGNAM=apcupsd
-VERSION=3.14.3
+VERSION=3.14.4
 ARCH=${ARCH:-i486}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 TAG=${TAG:-_SBo}
 
 CWD=$(pwd)
@@ -36,6 +36,7 @@ OUTPUT=${OUTPUT:-/tmp}
 # These can be changed in the config file after installing apcupsd,
 # so it's okay to leave them alone if you don't know what the values
 # should be yet.
+CGIPATH=${CGIPATH:-/etc/apcupsd}	# Path for cgi executables
 DEVICE=${DEVICE:-/dev/usb/hiddev0}	# Device node of UPS
 UPSTYPE=${UPSTYPE:-usb}			# Type of UPS
 UPSCABLE=${UPSCABLE:-usb}		# Cable type (RJ45<-->USB == USB)
@@ -44,6 +45,8 @@ if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
 elif [ "$ARCH" = "i686" ]; then
   SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
 fi
 
 set -e
@@ -73,27 +76,30 @@ CXXFLAGS="$SLKCFLAGS" \
   --sysconfdir=/etc/apcupsd \
   --disable-install-distdir \
   --enable-cgi \
-  --with-cgi-bin=/etc/apcupsd \
+  --with-cgi-bin=$CGIPATH \
   --enable-usb \
-  --enable-powerflute \
   --with-libwrap \
   --enable-nls \
   --enable-snmp=yes \
   --with-upstype=$UPSTYPE \
   --with-upscable=$UPSCABLE \
-  --with-dev=$DEVICE
+  --with-dev=$DEVICE \
+  --build=$ARCH-slackware-linux
 
 make
-make install-strip DESTDIR=$PKG
+make install DESTDIR=$PKG
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
 
 mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a \
-  ABOUT-NLS COPYING ChangeLog* DISCLAIMER Developers INSTALL ReleaseNotes \
-  VERIFYING examples doc/* $CWD/README-SLACKWARE $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a COPYING ChangeLog DISCLAIMER Developers INSTALL ReleaseNotes VERIFYING \
+  examples doc/* $CWD/README-SLACKWARE  $PKG/usr/doc/$PRGNAM-$VERSION
 cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
 find $PKG/usr/doc/$PRGNAM-$VERSION -type f -exec chmod 644 {} \;
 find $PKG/usr/doc/$PRGNAM-$VERSION -name "Makefile*" -exec rm {} \;
 find $PKG/usr/doc/$PRGNAM-$VERSION -name "*.man" -exec rm {} \;
+chown -R root:root $PKG/usr/doc
 
 # Install the apctest man page - it's not done automatically for some reason
 install -m 0644 doc/apctest.man $PKG/usr/man/man8/apctest.8
@@ -107,9 +113,8 @@ install -d -m 0755 $PKG/var/lock/subsys
 chmod 1777 $PKG/var/lock
 
 # Rename config files to *.new so custom changes aren't clobberred
-for i in apccontrol apcupsd.conf apcupsd.css changeme \
-  commfailure commok hosts.conf multimon.cgi multimon.conf \
-  offbattery onbattery upsfstats.cgi upsimage.cgi upsstats.cgi ; do
+for i in apccontrol apcupsd.conf apcupsd.css changeme commfailure \
+  commok hosts.conf multimon.conf offbattery onbattery ; do
     mv $PKG/etc/apcupsd/$i $PKG/etc/apcupsd/$i.new;
 done
 
diff --git a/system/apcupsd/apcupsd.info b/system/apcupsd/apcupsd.info
index a0819fe98f06..b27dd943ed89 100644
--- a/system/apcupsd/apcupsd.info
+++ b/system/apcupsd/apcupsd.info
@@ -1,8 +1,8 @@
 PRGNAM="apcupsd"
-VERSION="3.14.3"
+VERSION="3.14.4"
 HOMEPAGE="http://www.apcupsd.org"
-DOWNLOAD="http://downloads.sourceforge.net/apcupsd/apcupsd-3.14.3.tar.gz"
-MD5SUM="a212351d21828e9344264614c7ad8ba1"
+DOWNLOAD="http://downloads.sourceforge.net/apcupsd/apcupsd-3.14.4.tar.gz"
+MD5SUM="78811129db1a882b9a2b9afd540470b3"
 MAINTAINER="Robby Workman"
 EMAIL="rw@rlworkman.net"
-APPROVED="Alan_Hicks,Erik Hanson"
+APPROVED="David Somero"
diff --git a/system/apcupsd/doinst.sh b/system/apcupsd/doinst.sh
index 066579eb4b0e..797750001b7c 100644
--- a/system/apcupsd/doinst.sh
+++ b/system/apcupsd/doinst.sh
@@ -1,3 +1,5 @@
+#!/bin/sh
+
 config() {
   NEW="$1"
   OLD="$(dirname $NEW)/$(basename $NEW .new)"
@@ -11,25 +13,6 @@ config() {
   # Otherwise, we leave the .new copy for the admin to consider...
 }
 
-for i in \
-  apccontrol.new \
-  apcupsd.conf.new \
-  apcupsd.css.new \
-  changeme.new \
-  commfailure.new \
-  commok.new \
-  hosts.conf.new \
-  multimon.cgi.new \
-  multimon.conf.new \
-  offbattery.new \
-  onbattery.new \
-  upsfstats.cgi.new \
-  upsimage.cgi.new \
-  upsstats.cgi.new; 
-do \
-  config etc/apcupsd/$i; 
-done
-
 # Keep same perms on rc.apcupsd.new:
 if [ -e etc/rc.d/rc.apcupsd ]; then
   cp -a etc/rc.d/rc.apcupsd etc/rc.d/rc.apcupsd.new.incoming
@@ -38,4 +21,14 @@ if [ -e etc/rc.d/rc.apcupsd ]; then
 fi
 
 config etc/rc.d/rc.apcupsd.new
+config etc/apcupsd/apccontrol.new
+config etc/apcupsd/apcupsd.conf.new
+config etc/apcupsd/apcupsd.css.new
+config etc/apcupsd/changeme.new
+config etc/apcupsd/commfailure.new
+config etc/apcupsd/commok.new
+config etc/apcupsd/hosts.conf.new
+config etc/apcupsd/multimon.conf.new
+config etc/apcupsd/offbattery.new
+config etc/apcupsd/onbattery.new
 
diff --git a/system/apcupsd/slack-desc b/system/apcupsd/slack-desc
index 847312d3cfdd..d853a557ff36 100644
--- a/system/apcupsd/slack-desc
+++ b/system/apcupsd/slack-desc
@@ -5,7 +5,7 @@
 # make exactly 11 lines for the formatting to be correct.  It's also
 # customary to leave one space after the ':'.
 
-       |-----handy-ruler------------------------------------------------------|
+       |-----handy-ruler-----------------------------------------------------|
 apcupsd: apcupsd (APC UPS Daemon)
 apcupsd:
 apcupsd: Apcupsd can be used for power mangement and controlling most of APC's
-- 
cgit v1.2.3