From 640ec5343aafe71a83f1a2c2f79b19ffc4426f01 Mon Sep 17 00:00:00 2001
From: "Jan F. Chadima" <jfch@jagda.eu>
Date: Wed, 21 Mar 2018 22:34:56 +0000
Subject: perl/perl-MRO-Compat: Added (mro::* interface compatibility).

Signed-off-by: David Spencer <idlemoor@slackbuilds.org>
---
 perl/perl-MRO-Compat/README                     | 21 ++++++
 perl/perl-MRO-Compat/perl-MRO-Compat.SlackBuild | 99 +++++++++++++++++++++++++
 perl/perl-MRO-Compat/perl-MRO-Compat.info       | 10 +++
 perl/perl-MRO-Compat/slack-desc                 | 19 +++++
 4 files changed, 149 insertions(+)
 create mode 100644 perl/perl-MRO-Compat/README
 create mode 100644 perl/perl-MRO-Compat/perl-MRO-Compat.SlackBuild
 create mode 100644 perl/perl-MRO-Compat/perl-MRO-Compat.info
 create mode 100644 perl/perl-MRO-Compat/slack-desc

(limited to 'perl')

diff --git a/perl/perl-MRO-Compat/README b/perl/perl-MRO-Compat/README
new file mode 100644
index 0000000000000..f35683b29cb23
--- /dev/null
+++ b/perl/perl-MRO-Compat/README
@@ -0,0 +1,21 @@
+The "mro" namespace provides several utilities for dealing with
+method resolution order and method caching in general in Perl
+5.9.5 and higher.
+
+This module provides those interfaces for earlier versions of Perl
+(back to 5.6.0 anyways).
+
+It is a harmless no-op to use this module on 5.9.5+. That is to say,
+code which properly uses MRO::Compat will work unmodified on both
+older Perls and 5.9.5+.
+
+If you're writing a piece of software that would like to use the
+parts of 5.9.5+'s mro:: interfaces that are supported here, and you
+want compatibility with older Perls, this is the module for you.
+
+Some parts of this code will work better and/or faster with
+Class::C3::XS installed (which is an optional prereq of Class::C3,
+which is in turn a prereq of this package), but it's not a requirement.
+
+This module never exports any functions. All calls must be fully
+qualified with the mro:: prefix.
diff --git a/perl/perl-MRO-Compat/perl-MRO-Compat.SlackBuild b/perl/perl-MRO-Compat/perl-MRO-Compat.SlackBuild
new file mode 100644
index 0000000000000..557a7655e5236
--- /dev/null
+++ b/perl/perl-MRO-Compat/perl-MRO-Compat.SlackBuild
@@ -0,0 +1,99 @@
+#!/bin/sh
+
+# Slackware build script for perl-MRO-Compat
+
+# Copyright 2018 Jan F. Chadima <jfch@jagda.eu>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=perl-MRO-Compat
+VERSION=${VERSION:-0.13}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+SRCNAM="$(printf $PRGNAM | cut -d- -f2-)"
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.gz
+cd $SRCNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+perl Makefile.PL \
+  PREFIX=/usr \
+  INSTALLDIRS=vendor \
+  INSTALLVENDORMAN3DIR=/usr/man/man3
+make
+make test
+make install DESTDIR=$PKG
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+find $PKG -name perllocal.pod -o -name ".packlist" -o -name "*.bs" | xargs rm -f || true
+
+find $PKG -depth -type d -empty -delete || true
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  Changes README \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/perl/perl-MRO-Compat/perl-MRO-Compat.info b/perl/perl-MRO-Compat/perl-MRO-Compat.info
new file mode 100644
index 0000000000000..debedd23fd028
--- /dev/null
+++ b/perl/perl-MRO-Compat/perl-MRO-Compat.info
@@ -0,0 +1,10 @@
+PRGNAM="perl-MRO-Compat"
+VERSION="0.13"
+HOMEPAGE="https://metacpan.org/pod/MRO::Compat"
+DOWNLOAD="https://cpan.metacpan.org/authors/id/H/HA/HAARG/MRO-Compat-0.13.tar.gz"
+MD5SUM="d2e603e8ae9dc6934162d190eb085385"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="Jan F. Chadima"
+EMAIL="jfch@jagda.eu"
diff --git a/perl/perl-MRO-Compat/slack-desc b/perl/perl-MRO-Compat/slack-desc
new file mode 100644
index 0000000000000..10d3fa4990195
--- /dev/null
+++ b/perl/perl-MRO-Compat/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+               |-----handy-ruler------------------------------------------------------|
+perl-MRO-Compat: perl-MRO-Compat (mro::* interface compatibility)
+perl-MRO-Compat:
+perl-MRO-Compat: The "mro" namespace provides several utilities for dealing with
+perl-MRO-Compat: method resolution order and method caching in general in Perl 5.9.5
+perl-MRO-Compat: and higher.
+perl-MRO-Compat: This module provides those interfaces for earlier versions of Perl
+perl-MRO-Compat: (back to 5.6.0 anyways).
+perl-MRO-Compat:
+perl-MRO-Compat: Homepage: https://metacpan.org/pod/MRO::Compat
+perl-MRO-Compat:
+perl-MRO-Compat:
-- 
cgit v1.2.3