From 149164419c465d313ee25b6a2f0d2fa559c2d116 Mon Sep 17 00:00:00 2001 From: "B. Watson" Date: Mon, 19 Oct 2020 15:59:22 -0400 Subject: office/coolreader: Updated for version 3.2.49. Signed-off-by: B. Watson Signed-off-by: Willy Sudiarto Raharjo --- office/coolreader/README | 12 +++- office/coolreader/coolreader.SlackBuild | 101 ++++++++++++++++++++------------ office/coolreader/coolreader.info | 8 +-- office/coolreader/cr3.1 | 85 +++++++++++++++++++++++++++ office/coolreader/cr3.rst | 74 +++++++++++++++++++++++ office/coolreader/inifile.diff | 21 ------- office/coolreader/qt4_settings_ui.diff | 22 +++++++ office/coolreader/slack-desc | 4 +- 8 files changed, 262 insertions(+), 65 deletions(-) create mode 100644 office/coolreader/cr3.1 create mode 100644 office/coolreader/cr3.rst delete mode 100644 office/coolreader/inifile.diff create mode 100644 office/coolreader/qt4_settings_ui.diff (limited to 'office') diff --git a/office/coolreader/README b/office/coolreader/README index e12c8274947d..ca7de57c7977 100644 --- a/office/coolreader/README +++ b/office/coolreader/README @@ -5,4 +5,14 @@ CoolReader is an e-book reader for various platforms. Supported file formats include plain text, HTML, RTF, Microsoft Word (.doc), Palm Pilot (.prc, .pdb, .pml, .mobi), FB2, and EPUB. -Note: the executable and man page are called "cr3", not "coolreader". +Optional dependencies: The default user interface is Qt4, which +doesn't require anything extra. If you prefer Qt5 or wxWidgets: + +qt5 - install qt5, then run: GUI=qt5 ./coolreader.SlackBuild + +wx - install wxPython or wxGTK3 (last one installed 'wins'), then run: + GUI=wx ./coolreader.SlackBuild + +Note: coolreader is "chatty": it logs a lot of meaningless warnings +and errors to stderr. Unless there's an actual problem with the +application, you can ignore this stuff. diff --git a/office/coolreader/coolreader.SlackBuild b/office/coolreader/coolreader.SlackBuild index ce30ee6681a9..8bd2795b74ab 100644 --- a/office/coolreader/coolreader.SlackBuild +++ b/office/coolreader/coolreader.SlackBuild @@ -23,6 +23,11 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# 20201019 bkw: +# - update for v3.2.49, new homepage. +# - allow for building qt4, qt5, wx UIs. +# - replace useless/inaccurate man page with our own. + # 20200126 bkw, BUILD=2: # - take over maintenance # - i486 => i586 @@ -32,15 +37,10 @@ # - save/load settings (.ini file) to ~/.cr3, not /usr/share/cr3. PRGNAM=coolreader -VERSION=${VERSION:-3.0.56} -BUILD=${BUILD:-2} +VERSION=${VERSION:-3.2.49} +BUILD=${BUILD:-1} TAG=${TAG:-_SBo} -ORIG_PRGNAM=cr3 -ORIG_VERSION=$VERSION-7 -ORIG_DIRNAME=cr$ORIG_VERSION -ORIG_FILENAME=${ORIG_PRGNAM}_$VERSION.orig.tar.gz - if [ -z "$ARCH" ]; then case "$( uname -m )" in i?86) ARCH=i586 ;; @@ -73,48 +73,75 @@ set -e rm -rf $PKG mkdir -p $TMP $PKG $OUTPUT cd $TMP -rm -rf $ORIG_DIRNAME -tar xvf $CWD/$ORIG_FILENAME -cd $ORIG_DIRNAME -chown -R root:root . - -# Fix upstream typo -sed -i 's,documetn,document,g' cr3qt/src/*.ui cr3qt/src/i18n/*.ts - -# Don't try to load/save .ini file from /usr/share -patch -p1 < $CWD/inifile.diff +rm -rf $PRGNAM-cr$VERSION +tar xvf $CWD/$PRGNAM-cr$VERSION.tar.gz +cd $PRGNAM-cr$VERSION +find -L . -perm /111 -a \! -perm 755 -a -exec chmod 755 {} \+ -o \ + \! -perm /111 -a \! -perm 644 -a -exec chmod 644 {} \+ + +# Use bundled libunibreak, ours is too old (3.0). +# Use bundled fribidi, Pat's is too old (0.19.7). +sed -i -e '/find_package(libunibreak)/d' \ + -e '/find_package(FriBidi)/d' \ + CMakeLists.txt + +# Install the docs in the right place for Slackware. +sed -i "s,share/doc/cr3,doc/$PRGNAM-$VERSION," cr3qt/CMakeLists.txt + +# The settings patch for qt4 was made by loading cr3qt/src/settings.ui +# into Qt Designer and saving it again. Needed because upstream's +# using a different (older?) version of qt4. + +GUI=${GUI:-QT} +GUI="$( echo $GUI | tr a-z A-Z )" +case "$GUI" in + QT) UI=Qt4 + patch -p1 < $CWD/qt4_settings_ui.diff ;; + QT5) UI=Qt5 ;; + WX) # Either 2.8.x or 3.0.x works, be specific in the slack-desc. + UI="wxWidgets $( wx-config --version | cut -d. -f1,2)" ;; + *) echo "*** Unsupported GUI '$GUI', use one of: QT QT5 WX" + exit 1 ;; +esac + +echo "=== Building $UI GUI" mkdir -p build cd build -cmake \ - -D CMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ - -D CMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -D CMAKE_INSTALL_PREFIX=/usr \ - -D LIB_SUFFIX=${LIBDIRSUFFIX} \ - -D CMAKE_BUILD_TYPE=Release \ - -D MAX_IMAGE_SCALE_MUL=2 \ - -D DOC_DATA_COMPRESSION_LEVEL=3 \ - -D DOC_BUFFER_SIZE=0x1400000 \ - -D GUI=QT .. -make VERBOSE=1 -make install DESTDIR=$PKG + cmake \ + -D USE_UNRAR=1 \ + -D CMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ + -D CMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ + -D CMAKE_INSTALL_PREFIX=/usr \ + -D LIB_SUFFIX=${LIBDIRSUFFIX} \ + -D CMAKE_BUILD_TYPE=Release \ + -D MAX_IMAGE_SCALE_MUL=2 \ + -D DOC_DATA_COMPRESSION_LEVEL=3 \ + -D DOC_BUFFER_SIZE=0x1400000 \ + -D GUI=$GUI .. + make VERBOSE=1 + make install/strip DESTDIR=$PKG cd .. -strip $PKG/usr/bin/$ORIG_PRGNAM - -mkdir -p $PKG/usr/man -mv $PKG/usr/share/man/* $PKG/usr/man +# Upstream's man page doesn't document all the options, and incorrectly +# refers to the (nonexistent) info page. It's also hardcoded to install +# to /usr/share/man. rm -rf $PKG/usr/share/man +mkdir -p $PKG/usr/man/man1 +gzip -9c < $CWD/cr3.1 > $PKG/usr/man/man1/cr3.1.gz -sed -i '/Icon/s|\.png||' $PKG/usr/share/applications/$ORIG_PRGNAM.desktop +# Tired of having to remember the binary's called something other than +# the package and source name. +ln -s cr3 $PKG/usr/bin/$PRGNAM +ln -s cr3.1.gz $PKG/usr/man/man1/$PRGNAM.1.gz +# This dir already exists with GUI=QT or QT5, but not WX. mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION -mv $PKG/usr/share/doc/$ORIG_PRGNAM/* $PKG/usr/doc/$PRGNAM-$VERSION -rm -rf $PKG/usr/share/doc +cp -a README.md cr3gui/COPYING $PKG/usr/doc/$PRGNAM-$VERSION cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc +sed "s,@UI@,$UI," $CWD/slack-desc > $PKG/install/slack-desc cat $CWD/doinst.sh > $PKG/install/doinst.sh cd $PKG diff --git a/office/coolreader/coolreader.info b/office/coolreader/coolreader.info index 2a462222f6aa..93eab170aabf 100644 --- a/office/coolreader/coolreader.info +++ b/office/coolreader/coolreader.info @@ -1,8 +1,8 @@ PRGNAM="coolreader" -VERSION="3.0.56" -HOMEPAGE="https://sourceforge.net/projects/crengine/" -DOWNLOAD="https://downloads.sourceforge.net/crengine/CoolReader3/cr3_3.0.56.orig.tar.gz" -MD5SUM="cc221a608a1b5fea2db5a519c14eeb39" +VERSION="3.2.49" +HOMEPAGE="https://github.com/buggins/coolreader" +DOWNLOAD="https://github.com/buggins/coolreader/archive/cr3.2.49/coolreader-cr3.2.49.tar.gz" +MD5SUM="0a1f72a2799ba454a47e846ad59825c3" DOWNLOAD_x86_64="" MD5SUM_x86_64="" REQUIRES="" diff --git a/office/coolreader/cr3.1 b/office/coolreader/cr3.1 new file mode 100644 index 000000000000..fda4cb23750f --- /dev/null +++ b/office/coolreader/cr3.1 @@ -0,0 +1,85 @@ +.\" Man page generated from reStructuredText. +. +.TH CR3 1 "2020-10-19" "3.2.49" "SlackBuilds.org" +.SH NAME +cr3 \- coolreader (e-book reader) +. +.nr rst2man-indent-level 0 +. +.de1 rstReportMargin +\\$1 \\n[an-margin] +level \\n[rst2man-indent-level] +level margin: \\n[rst2man-indent\\n[rst2man-indent-level]] +- +\\n[rst2man-indent0] +\\n[rst2man-indent1] +\\n[rst2man-indent2] +.. +.de1 INDENT +.\" .rstReportMargin pre: +. RS \\$1 +. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin] +. nr rst2man-indent-level +1 +.\" .rstReportMargin post: +.. +.de UNINDENT +. RE +.\" indent \\n[an-margin] +.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]] +.nr rst2man-indent-level -1 +.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]] +.in \\n[rst2man-indent\\n[rst2man-indent-level]]u +.. +.\" RST source for cr3(1) man page. Convert with: +. +.\" rst2man.py cr3.rst > cr3.1 +. +.\" rst2man.py comes from the SBo development/docutils package. +. +.SH SYNOPSIS +.sp +cr3 [\fI\-options\fP] [filename] +.SH DESCRIPTION +.sp +CoolReader is an e\-book reader for various platforms. +.sp +Supported file formats include plain text, HTML, RTF, Microsoft Word +(.doc), Palm Pilot (.prc, .pdb, .pml, .mobi), FB2, and EPUB. +.SH OPTIONS +.INDENT 0.0 +.TP +.B \-\-version +Output version number. +.UNINDENT +.INDENT 0.0 +.TP +.B \-?, \-h, \-\-help +Output usage string. +.TP +.B \-\-loglevel=ERROR|WARN|INFO|DEBUG|TRACE +Set logging level. +.TP +.B \-\-logfile=|stdout|stderr +Set log file. Default is stderr. +.UNINDENT +.SH FILES +.INDENT 0.0 +.TP +.B ~/.cr3/ +Per\-user configuration, cache, and bookmarks. It\(aqs not recommended to +edit \fBcr3.ini\fP by hand. +.UNINDENT +.SH COPYRIGHT +.sp +See the file /usr/doc/coolreader\-3.2.49/COPYING for license information. +.SH AUTHORS +.sp +cr3 was written by Vadim Lopatin, aka buggins. +.sp +This man page written for the SlackBuilds.org project +by B. Watson, and is licensed under the WTFPL. +.SH SEE ALSO +.sp +The cr3 homepage: \fI\%https://github.com/buggins/coolreader\fP +.\" Generated by docutils manpage writer. +. diff --git a/office/coolreader/cr3.rst b/office/coolreader/cr3.rst new file mode 100644 index 000000000000..04b3abe02ed9 --- /dev/null +++ b/office/coolreader/cr3.rst @@ -0,0 +1,74 @@ +.. RST source for cr3(1) man page. Convert with: +.. rst2man.py cr3.rst > cr3.1 +.. rst2man.py comes from the SBo development/docutils package. + +.. Note to SBo admins: Please don't include this file in the doc dir +.. in the package. It's here because it's the source for the man page. + +.. |version| replace:: 3.2.49 +.. |date| date:: + +=== +cr3 +=== + +-------------------------- +coolreader (e-book reader) +-------------------------- + +:Manual section: 1 +:Manual group: SlackBuilds.org +:Date: |date| +:Version: |version| + +SYNOPSIS +======== + +cr3 [*-options*] [filename] + +DESCRIPTION +=========== + +CoolReader is an e-book reader for various platforms. + +Supported file formats include plain text, HTML, RTF, Microsoft Word +(.doc), Palm Pilot (.prc, .pdb, .pml, .mobi), FB2, and EPUB. + +OPTIONS +======= + +--version Output version number. + +-?, -h, --help + Output usage string. + +--loglevel=ERROR|WARN|INFO|DEBUG|TRACE + Set logging level. + +--logfile=|stdout|stderr + Set log file. Default is stderr. + +FILES +===== + +~/.cr3/ + Per-user configuration, cache, and bookmarks. It's not recommended to + edit **cr3.ini** by hand. + +COPYRIGHT +========= + +See the file /usr/doc/coolreader-|version|/COPYING for license information. + +AUTHORS +======= + +cr3 was written by Vadim Lopatin, aka buggins. + +This man page written for the SlackBuilds.org project +by B. Watson, and is licensed under the WTFPL. + +SEE ALSO +======== + +The cr3 homepage: https://github.com/buggins/coolreader diff --git a/office/coolreader/inifile.diff b/office/coolreader/inifile.diff deleted file mode 100644 index 9290599e6931..000000000000 --- a/office/coolreader/inifile.diff +++ /dev/null @@ -1,21 +0,0 @@ -diff -Naur cr3.0.56-7/cr3qt/src/mainwindow.cpp cr3.0.56-7.patched/cr3qt/src/mainwindow.cpp ---- cr3.0.56-7/cr3qt/src/mainwindow.cpp 2012-03-21 01:39:19.000000000 -0400 -+++ cr3.0.56-7.patched/cr3qt/src/mainwindow.cpp 2020-01-26 19:26:09.590595122 -0500 -@@ -79,7 +79,6 @@ - QString bookmarksDir = homeDir + "bookmarks"; - QString histFile = exeDir + "cr3hist.bmk"; - QString histFile2 = homeDir + "cr3hist.bmk"; -- QString iniFile2 = exeDir + "cr3.ini"; - QString iniFile = homeDir + "cr3.ini"; - QString cssFile = homeDir + "fb2.css"; - QString cssFile2 = exeDir + "fb2.css"; -@@ -91,8 +90,7 @@ - - ldomDocCache::init( qt2cr( cacheDir ), DOC_CACHE_SIZE ); - ui->view->setPropsChangeCallback( this ); -- if ( !ui->view->loadSettings( iniFile ) ) -- ui->view->loadSettings( iniFile2 ); -+ ui->view->loadSettings( iniFile ); - if ( !ui->view->loadHistory( histFile ) ) - ui->view->loadHistory( histFile2 ); - if ( !ui->view->loadCSS( cssFile ) ) diff --git a/office/coolreader/qt4_settings_ui.diff b/office/coolreader/qt4_settings_ui.diff new file mode 100644 index 000000000000..cf95520bd92b --- /dev/null +++ b/office/coolreader/qt4_settings_ui.diff @@ -0,0 +1,22 @@ +--- coolreader-cr3.2.49/cr3qt/src/settings.ui 2020-09-11 07:17:23.000000000 -0400 ++++ settings.ui 2020-10-19 12:30:04.557739030 -0400 +@@ -1566,7 +1566,7 @@ + + + +- ++ + Simple (FreeType only, fastest) + + +@@ -1733,8 +1733,8 @@ + + 0 + 0 +- 393 +- 620 ++ 387 ++ 625 + + + diff --git a/office/coolreader/slack-desc b/office/coolreader/slack-desc index ed6f84a7074b..655f530274be 100644 --- a/office/coolreader/slack-desc +++ b/office/coolreader/slack-desc @@ -13,7 +13,7 @@ coolreader: coolreader: Supported file formats include plain text, HTML, RTF, Microsoft Word coolreader: (.doc), Palm Pilot (.prc, .pdb, .pml, .mobi), FB2, and EPUB. coolreader: -coolreader: Homepage: https://sourceforge.net/projects/crengine/ -coolreader: +coolreader: This package built with the @UI@ user interface. coolreader: +coolreader: Homepage: https://sourceforge.net/projects/crengine/ coolreader: -- cgit v1.2.3