From 4faba95d6557628c97aca3be2ae49181ee798ff9 Mon Sep 17 00:00:00 2001 From: David Somero Date: Wed, 12 May 2010 17:43:28 +0200 Subject: network/hylafax: Updated for version 6.0.2 --- network/hylafax/README | 34 +---- network/hylafax/README.SLACKWARE | 27 ++++ network/hylafax/config.local | 259 ------------------------------------- network/hylafax/config.local.in | 255 ++++++++++++++++++++++++++++++++++++ network/hylafax/doinst.sh | 37 ++++++ network/hylafax/hylafax.SlackBuild | 75 ++++++----- network/hylafax/hylafax.info | 10 +- 7 files changed, 362 insertions(+), 335 deletions(-) create mode 100644 network/hylafax/README.SLACKWARE delete mode 100644 network/hylafax/config.local create mode 100644 network/hylafax/config.local.in create mode 100644 network/hylafax/doinst.sh (limited to 'network/hylafax') diff --git a/network/hylafax/README b/network/hylafax/README index 3a3b4ee90fc6d..ab92701ff5226 100644 --- a/network/hylafax/README +++ b/network/hylafax/README @@ -4,36 +4,4 @@ is designed around a client-server architecture. Fax modems may reside on a single machine on a network and clients can submit an outbound job from any other machine on the network. -Client software is designed to be lightweight and easy to port. - - -If you need to start hylafax at boot -edit /etc/rc.d/rc.local and add the lines: - -script: -# Starting the HylaFAX hfaxd and faxq Daemons at Boot. - if [ -x /etc/rc.d/rc.hylafax ]; then - /etc/rc.d/rc.hylafax start - fi - -Edit /etc/inittab and add a line(s) similar to: - -m0:2345:respawn:/usr/libexec/hylafax/faxgetty ttyS0 - -where 'm0' is unique in inittab and 'ttyS0' matches the device -name(s) used at the outset of the faxaddmodem script. - -With root permissions, execute '/usr/sbin/faxsetup'. -When finished, faxsetup will automatically run faxaddmodem -for you. Generally, you can follow all of the defaults -except those for FaxMaster, the local fax number(s), TSI, -and any modem-specific information in faxaddmodem. - -It would be wise to run faxcron and faxqclean regularly -from cron so that the queue directories do not clutter -up and fill the storage device. Many installations run -faxqclean every hour and faxcron every day. Insert -something like this into your uucp or root crontab file: - -0 * * * * /usr/sbin/faxqclean -0 0 * * * /usr/sbin/faxcron | mail -s "HylaFAX Usage Report" faxmaster +See /usr/doc/hylafax-6.0.2/README.SLACKWARE for configuration hints. diff --git a/network/hylafax/README.SLACKWARE b/network/hylafax/README.SLACKWARE new file mode 100644 index 0000000000000..10f1904c5418e --- /dev/null +++ b/network/hylafax/README.SLACKWARE @@ -0,0 +1,27 @@ +/usr/doc/hylafax-@VERSION@/README.SLACKWARE + +If you need to start hylafax at boot, add this to /etc/rc.d/rc.local: + + # Starting the HylaFAX hfaxd and faxq Daemons at Boot. + if [ -x /etc/rc.d/rc.hylafax ]; then + /etc/rc.d/rc.hylafax start + fi + +Edit /etc/inittab and add a line similar to: + m0:2345:respawn:/usr/libexec/hylafax/sbin/faxgetty ttyS0 +where 'm0' is unique in inittab and 'ttyS0' matches the device +name(s) used at the outset of the faxaddmodem script. + +With root permissions, execute '/usr/sbin/faxsetup'. +When finished, faxsetup will automatically run faxaddmodem for you. +Generally, you can follow all of the defaults except those for FaxMaster, +the local fax number(s), TSI, and any modem-specific information in +faxaddmodem. + +It would be wise to run faxcron and faxqclean regularly from cron so that +the queue directories do not clutter up and fill the storage device. Many +installations run faxqclean every hour and faxcron every day. Insert +something like this into your uucp or root crontab file: + 0 * * * * /usr/sbin/faxqclean + 0 0 * * * /usr/sbin/faxcron | mail -s "HylaFAX Usage Report" faxmaster + diff --git a/network/hylafax/config.local b/network/hylafax/config.local deleted file mode 100644 index bd6d72af647a8..0000000000000 --- a/network/hylafax/config.local +++ /dev/null @@ -1,259 +0,0 @@ -# $Id: config.site,v 1.14 2007/06/21 19:21:45 aidan Exp $ -# -# HylaFAX Facsimile Software -# -# Copyright (c) 1990-1996 Sam Leffler -# Copyright (c) 1991-1996 Silicon Graphics, Inc. -# HylaFAX is a trademark of Silicon Graphics, Inc. -# -# Permission to use, copy, modify, distribute, and sell this software and -# its documentation for any purpose is hereby granted without fee, provided -# that (i) the above copyright notices and this permission notice appear in -# all copies of the software and related documentation, and (ii) the names of -# Sam Leffler and Silicon Graphics may not be used in any advertising or -# publicity relating to the software without the specific, prior written -# permission of Sam Leffler and Silicon Graphics. -# -# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -# -# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -# OF THIS SOFTWARE. -# - -# -# This file holds site-specific configuration parameters. -# -# Nothing is defined in here by default, the definitions -# commented out below serve as documentation for what you -# can set in this file or a config.local file. -# -# Note that you do not need to set anything here unless you -# want to override the auto-configuration behaviour and/or -# interactive prompting done by the configure script. -# - -# -# Package controls. -# -#DSO="auto" # configure DSO support (auto|IRIX|no) -#GETTY="auto" # type of getty support (auto|BSD|SysV) -#PS="auto" # PostScript support to use (auto|gs|dps|imp) -#SGI2FAX="auto" # configure SGI image support (auto|yes|no) -#DPS="no" # install SGI DPS-based RIP (yes|no) -GS="yes" # install Ghostscript RIP (yes|no) -#IMP="no" # install SGI Impressario 2.1 support (yes|no) -#REGEX="yes" # use distributed regular expression package -#UTMP="utmpx" # type of utmp+wtmp handling (auto|utmp|utmpx) -#DBLIB="no" # use distributed libdb distribution - -# -# Directory parameters. -# -DIR_BIN="/usr/bin" # directory for client apps -DIR_LIB="/usr/lib" # directory for libfaxserver, libfaxutil -DIR_LIBDATA="/usr/lib/hylafax" # directory for client data -DIR_LIBEXEC="/usr/libexec/hylafax" # directory for libraries&hidden apps -DIR_MAN="/usr/man" # directory for manual pages -DIR_SPOOL="/var/spool/hylafax" # directory for spooling area -DIR_SBIN="/usr/sbin" # directory for system apps -#DIR_LOCKS="/usr/spool/locks" # directory for UUCP lock files -#FONTMAP="/usr/share/ghostscript/3.33" # directorys containing Fontmap files -#PATH_AFM="/usr/lib/DPS/AFM" # directorys for AFM files - -# -# Miscellaneous parameters. -# -#DEFVRES="196" # default vertical res for outbound fax -#FILLORDER="MS2LSB" # bit order of cpu (MSB2LSB/LSB2MSB) -FAXGID="uucp" # group ID for fax user -FAXUID="uucp" # user ID for fax user -PAGESIZE="North American Letter" # default page size -SYSGID="root" # group ID for system installs -SYSUID="root" # user ID for system installs -#LOCKS="ascii" # default UUCP lockfile scheme -# -#PATH_GETTY="/etc/getty" # pathname of suitable getty program -#PATH_VGETTY="/bin/vgetty" # pathname of voice getty program -#PATH_EGETTY="/bin/egetty" # pathname of external getty program -#PATH_SENDMAIL="/usr/lib/sendmail" # pathname of suitable sendmail program -PATH_GSRIP="/usr/bin/gs" # pathname of Ghostscript-based RIP -#PATH_DPSRIP="/var/spool/hylafax/bin/ps2fax.exe" # pathname of DPS-based RIP -#PATH_IMPRIP="/usr/lib/print/psrip" # pathname of Impressario 2.1 RIP -#MANSCHEME="sysv-source-cat-strip" # manual page installation scheme -SYSVINIT="auto" # install SysV-style init support (auto|yes|no) -DIR_SYSVINIT="/etc/rc.d" # location of SysV-style init script -DIR_SYSVINITSTART="/etc/rc.d" # location of SysV-style start script -DIR_SYSVINITSTOP="/etc/rc.d" # location of SysV-style stop script -NAME_SYSVINITSTART="rc.hylafax" # name of SysV-style start script -NAME_SYSVINITSTOP="rc.hylafax" # name of SysV-style stop script -FAXQ_SERVER=yes # init script starts faxq -HFAXD_SERVER=yes # init script starts hfaxd -HFAXD_OLD_PROTOCOL=no # don't start old protocol -HFAXD_SNPP_SERVER=no # don't start paging protocol - -# SVR4 packaging stuff -#PKG_ARCH= # ARCH variable in pkginfo file -#PKG_EMAIL=someone@somehost.somedomain # EMAIL variable in pkginfo file -#PKG_VENDOR="Your Name Here" # VENDOR variable in pkginfo file -# - -# -# Parameters used when building the software. -# -# Note that configure has several ENVOPTS built into it that are -# set according to the target. This is done to help naive folks. -# -# Beware of changing the INSTALL definition; you *must* have an -# install script that emulates the Silicon Graphics install program! -# -#AR="/bin/ar" # pathname of suitable ar program -#AROPTS="rc" # options to ar for creating archive -#CC="gcc" # name/pathname of C compiler -#CXX="gcc" # name/pathname of C++ compiler -#CXXFILE="-x c++" # options for proper C++ processing -#ENVOPTS="-Aa" # options for getting ANSI C -#GCOPTS="-g" # options to pass C compiler -#GCXXOPTS="-g" # options to pass C++ compiler -#GENDIST="/sbin/gendist" # pathname of SGI inst generator program -#INSTALL='${SHELL} ${PORT}/install.sh' # SGI install program/emulator -#LIBMALLOC="auto" # yes|no|auto configure -lmalloc use -#LIBPORT='${PORT}/libport.a' # library with emulation code -#LIBSUN="auto" # yes|no|auto configure -lsun use -#LLDOPTS="" # extra link line options -#MACHDEPLIBS="" # extra libraries for linking -#OPTIMIZER="-O2 -march=i486 -mtune=i686" # optimizer flags -#PORTFUNCS="" # non-standard functions to emulate -#PROTOTYPES="-prototypes" # C compiler options for checking function prototypes -#RANLIB=":" # pathname of suitable ranlib program -#SHDLIBC="-lc_s" # shared C library, if not standard -#SIGHANDLERTYPES='(void(*)(int,...))' # types to check for signal handler -#STRIP="/bin/strip" # strip program used by install.sh -GLDOPTS="-L/usr/lib" -# -# The source for the TIFF library is not required -# to build this software, but the library is required -# to link against. If libtiff is installed in a -# non-standard location then setup LIBTIFF accordingly. -# -LIBTIFF="-L/usr/lib -ltiff" # linkage convention for libtiff -TIFFINC="/usr/include" # place to find tiffio.h -TIFFBIN="/usr/bin" # where TIFF tools live - -# -# The source for the ZLIB library is not required -# to build this software, but the library is required -# to link against. If ZLIB is installed in a -# non-standard location then setup LIBZ accordingly. -# -LIBZ="-L/usr/lib -lz" # linkage convention for libz -ZLIBINC="-I/usr/include" # place to find zlib.h - -# -# The source for the POSIX regular expression package -# is not required to build this software, but the package -# is required to link against. If the copy of the software -# that is included in this distribution is not to be used -# then set REGEX=no and supply the following definitions. -# -LIBREGEX=" " # linkage convention for regex package -REGEXINC="/usr/include" # place to find regex.h - -# -# The LIBDB hashed database package is (currently) used -# only by the MLA tools that are not publicly available -# but which are built from within this source tree. In -# the future the fax software may use the libdb software -# for the remote client capabilities database (so these -# hooks are included now). -# -# The source for the LIBDB hashed database package -# is not required to build this software, but the package -# is required to link against. If the copy of the software -# that is included in this distribution is not to be used -# then set DBLIB=no and supply the following definitions. -# -LIBDB=" " # linkage convention for libdb package -DBLIBINC="/usr/include" # place to find db.h - -# -# Parameters to control various workarounds for system bugs. -# -# These parameters are normally set in configure based on -# the target system. If they are set here, then they will -# override anything done by configure. -# -#CONFIG_OPENFIFO="O_RDONLY" # mode to open FIFOs in server proc's -#CONFIG_FIFOBUG="yes" # enable workaround for FIFO select bug -#CONFIG_TIOCMBISBYREF="yes" # pass arg by reference to ioctl -#CONFIG_WINSZHACK="no" # include extra files for TIOCWINSZ use -#CONFIG_ABORTBUG="no" # enable workaround for abort problems -#CONFIG_NOREOPEN="yes" # reopen tty device after toggling DTR -#CONFIG_NOSTDINDUP="yes" # do not redirect stdout to stdin in ondelay -#CONFIG_BADEXECVPROTO="no" # system has incorrect execv func decl -#CONFIG_BADEXECVEPROTO="no" # system has incorrect execve func decl -#CONFIG_BADGETOPTPROTO="no" # system has incorrect getopt func decl -#CONFIG_SOCKARGLENTYPE="unsigned long" # call-by-ref arg type for socket funcs -#CONFIG_BADSELECTPROTO="no" # system has way old select func decl -#CONFIG_MAXGID="5999" # maximum permissable GID -#CONFIG_OSFCNH="auto" # control inclusion of - -# -# Dynamic Shared Object (DSO) support. -# -# Beware that adding new support for DSOs may require some -# modifications to the */Makefile.dso files. -# -#DSOSUF="so" # DSO filename suffix -#DSODELAY="-delay_load" # DSO option for delayed loading -#DSOOPTS="-shared -rdata_shared" # options for building DSOs - -# -# Makefile construction parameters. -# -# These should not normally be set; configure will -# deduce the appropriate syntax to use for includes. -# -#MAKECXXOVERRIDE="=.C" # make override stuff for SunPRO C++ -#MAKEDEPINCLUDE="include" # make include for dependency files -#MAKEDSOINCLUDE="#" # make include for DSO support -#MAKEINCLUDE=".include" # make include syntax -#MAKELQUOTE="<" # make include syntax -#MAKERQUOTE=">" # make include syntax -#SETMAKE='MAKE = ${MAKE}' # define if make does not setup $MAKE -#MKDEPCOPTS="" # C compiler opts to supply w/ -M -#MKDEPCXXOPTS="" # C++ compiler opts to supply w/ -M - -# -# General system stuff used by the distribution. -# -# Beware of setting these as configure selects several programs -# based on whether or not they are capable of processing scripts -# included in the distribution (e.g AWK and SCRIPT_SH, SED). -# -#AWK="/bin/awk" # pathname of suitable awk program -#CAT="/bin/cat" # pathname of suitable cat program -#CHGRP="/etc/chgrp" # pathname of suitable chgrp program -#CHMOD="/etc/chmod" # pathname of suitable chmod program -#CHOWN="/etc/chown" # pathname of suitable chown program -#CMP="/bin/cmp" # pathname of suitable cmp program -#COL="/bin/col" # pathname of suitable col program -#CP="/bin/cp" # pathname of suitable cp program -#ECHO="/bin/echo" # pathname of suitable echo program -#GREP="/bin/grep" # pathname of suitable grep program -#LN="/bin/ln" # pathname of suitable ln program -#LN_S="-s" # option to ${LN} to create symlink -#MAN="/usr/bin/man" # pathname of suitable man program -MKDIR="/bin/mkdir -p" # pathname of suitable mkdir program -#MKFIFO="/bin/mkfifo" # pathname of suitable mkfifo program -#MV="/bin/mv" # pathname of suitable mv program -#MV_F="-f" # option to ${MV} to force operation -#RMCMD="/bin/rm" # pathname of suitable rm program -#SED="/bin/sed" # pathname of suitable sed program -#SCRIPT_SH="/bin/sh" # pathname of suitable shell -#SORT="/bin/sort" # pathname of suitable sort program diff --git a/network/hylafax/config.local.in b/network/hylafax/config.local.in new file mode 100644 index 0000000000000..20412e22fe967 --- /dev/null +++ b/network/hylafax/config.local.in @@ -0,0 +1,255 @@ +# $Id: config.site,v 1.24 2009/04/23 12:45:30 aidan Exp $ +# +# HylaFAX Facsimile Software +# +# Copyright (c) 1990-1996 Sam Leffler +# Copyright (c) 1991-1996 Silicon Graphics, Inc. +# HylaFAX is a trademark of Silicon Graphics, Inc. +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. +# + +# +# This file holds site-specific configuration parameters. +# +# Nothing is defined in here by default, the definitions +# commented out below serve as documentation for what you +# can set in this file or a config.local file. +# +# Note that you do not need to set anything here unless you +# want to override the auto-configuration behaviour and/or +# interactive prompting done by the configure script. +# + +# +# Package controls. +# +#DSO="auto" # configure DSO support (auto|IRIX|no) +#GETTY="auto" # type of getty support (auto|BSD|SysV) +#PS="auto" # PostScript support to use (auto|gs|dps|imp) +#SGI2FAX="auto" # configure SGI image support (auto|yes|no) +#DPS="no" # install SGI DPS-based RIP (yes|no) +GS="no" # install Ghostscript RIP (yes|no) +#IMP="no" # install SGI Impressario 2.1 support (yes|no) +#REGEX="yes" # use distributed regular expression package +#UTMP="utmpx" # type of utmp+wtmp handling (auto|utmp|utmpx) +#NLS="auto" # enable NLS support (auto|yes|no) + +# +# Directory parameters. +# +DIR_BIN="/usr/bin" # directory for client apps +DIR_LIB="/usr/lib@LIBDIRSUFFIX@" # directory for libfaxserver, libfaxutil +DIR_LIBDATA="/usr/lib@LIBDIRSUFFIX@/hylafax" # directory for client data +DIR_LIBEXEC="/usr/libexec/hylafax" # directory for libraries&hidden apps +DIR_LOCALE='/usr/share/locale' +DIR_MAN="/usr/man" # directory for manual pages +DIR_SPOOL="/var/spool/hylafax" # directory for spooling area +DIR_SBIN="/usr/sbin" # directory for system apps +#DIR_LOCKS="/usr/spool/locks" # directory for UUCP lock files +#FONTMAP="/usr/share/ghostscript/3.33" # directorys containing Fontmap files +#PATH_AFM="/usr/lib@LIBDIRSUFFIX@/DPS/AFM" # directorys for AFM files + +# +# Miscellaneous parameters. +# +#DEFVRES="196" # default vertical res for outbound fax +#FILLORDER="MS2LSB" # bit order of cpu (MSB2LSB/LSB2MSB) +FAXGID="uucp" # group ID for fax user +FAXUID="uucp" # user ID for fax user +PAGESIZE="North American Letter" # default page size +SYSGID="root" # group ID for system installs +SYSUID="root" # user ID for system installs +#LOCKS="ascii" # default UUCP lockfile scheme +# +#PATH_GETTY="/etc/getty" # pathname of suitable getty program +#PATH_VGETTY="/bin/vgetty" # pathname of voice getty program +#PATH_EGETTY="/bin/egetty" # pathname of external getty program +#PATH_SENDMAIL="/usr/lib@LIBDIRSUFFIX@/sendmail" # pathname of suitable sendmail program +PATH_GSRIP="/usr/bin/gs" # pathname of Ghostscript-based RIP +#PATH_DPSRIP="/var/spool/hylafax/bin/ps2fax.exe" # pathname of DPS-based RIP +#PATH_IMPRIP="/usr/lib@LIBDIRSUFFIX@/print/psrip" # pathname of Impressario 2.1 RIP +#MANSCHEME="sysv-source-cat-strip" # manual page installation scheme +SYSVINIT="auto" # install SysV-style init support (auto|yes|no) +DIR_SYSVINIT="/etc/rc.d" # location of SysV-style init script +DIR_SYSVINITSTART="/etc/rc.d" # location of SysV-style start script +DIR_SYSVINITSTOP="/etc/rc.d" # location of SysV-style stop script +NAME_SYSVINITSTART="rc.hylafax" # name of SysV-style start script +NAME_SYSVINITSTOP="rc.hylafax" # name of SysV-style stop script +FAXQ_SERVER=yes # init script starts faxq +HFAXD_SERVER=yes # init script starts hfaxd +HFAXD_SNPP_SERVER=no # don't start paging protocol + +# SVR4 packaging stuff +#PKG_ARCH= # ARCH variable in pkginfo file +#PKG_EMAIL=someone@somehost.somedomain # EMAIL variable in pkginfo file +#PKG_VENDOR="Your Name Here" # VENDOR variable in pkginfo file +# + +# +# Parameters used when building the software. +# +# Note that configure has several ENVOPTS built into it that are +# set according to the target. This is done to help naive folks. +# +# Beware of changing the INSTALL definition; you *must* have an +# install script that emulates the Silicon Graphics install program! +# +#AR="/bin/ar" # pathname of suitable ar program +#AROPTS="rc" # options to ar for creating archive +#CC="gcc" # name/pathname of C compiler +#CXX="gcc" # name/pathname of C++ compiler +#CXXFILE="-x c++" # options for proper C++ processing +#ENVOPTS="-Aa" # options for getting ANSI C +#GCOPTS="-g" # options to pass C compiler +#GCXXOPTS="-g" # options to pass C++ compiler +#GENDIST="/sbin/gendist" # pathname of SGI inst generator program +#INSTALL='${SHELL} ${PORT}/install.sh' # SGI install program/emulator +#LIBMALLOC="auto" # yes|no|auto configure -lmalloc use +#LIBPORT='${PORT}/libport.a' # library with emulation code +#LIBSUN="auto" # yes|no|auto configure -lsun use +#LLDOPTS="" # extra link line options +#MACHDEPLIBS="" # extra libraries for linking +#OPTIMIZER="-O" # optimizer flags +#PORTFUNCS="" # non-standard functions to emulate +#PROTOTYPES="-prototypes" # C compiler options for checking function prototypes +#RANLIB=":" # pathname of suitable ranlib program +#SHDLIBC="-lc_s" # shared C library, if not standard +#SIGHANDLERTYPES='(void(*)(int,...))' # types to check for signal handler +#STRIP="/bin/strip" # strip program used by install.sh + +# +# The source for the TIFF library is not required +# to build this software, but the library is required +# to link against. If libtiff is installed in a +# non-standard location then setup LIBTIFF accordingly. +# +LIBTIFF="-L/usr/lib@LIBDIRSUFFIX@ -ltiff" # linkage convention for libtiff +TIFFINC="-I/usr/include" # place to find tiffio.h +TIFFBIN="/usr/bin" # where TIFF tools live + +# +# The source for the ZLIB library is not required +# to build this software, but the library is required +# to link against. If ZLIB is installed in a +# non-standard location then setup LIBZ accordingly. +# +LIBZ="-L/usr/lib@LIBDIRSUFFIX@ -lz" # linkage convention for libz +ZLIBINC="-I/usr/include" # place to find zlib.h + +# +# The source for the POSIX regular expression package +# is not required to build this software, but the package +# is required to link against. If the copy of the software +# that is included in this distribution is not to be used +# then set REGEX=no and supply the following definitions. +# +#LIBREGEX="" # linkage convention for regex package +#REGEXINC="-I/usr/include" # place to find regex.h + +# +# NLS (gettext) library support is used by default if it's found +# xgettext is not required to build this software, but if you try +# and rebuild the message template catalogs, you will need it. Some +# platforms may need extra options to link for libintl as well. +# +INTLINC="-I/usr/include" +#LIBINTL="" # configure will try LIBINTL="-lintl" +#XGETTEXT="xgettext --foreign-user -ctranslator --no-wrap --sort-by-file --omit-header --strict --indent --force-po" +#MSGMERGE="msgmerge --no-wrap --sort-by-file" +#MSGFMT=msgfmt +#MSGCAT=msgcat + +# +# Parameters to control various workarounds for system bugs. +# +# These parameters are normally set in configure based on +# the target system. If they are set here, then they will +# override anything done by configure. +# +#CONFIG_OPENFIFO="O_RDONLY" # mode to open FIFOs in server proc's +#CONFIG_FIFOBUG="yes" # enable workaround for FIFO select bug +#CONFIG_TIOCMBISBYREF="yes" # pass arg by reference to ioctl +#CONFIG_WINSZHACK="no" # include extra files for TIOCWINSZ use +#CONFIG_ABORTBUG="no" # enable workaround for abort problems +#CONFIG_NOREOPEN="yes" # reopen tty device after toggling DTR +#CONFIG_NOSTDINDUP="yes" # do not redirect stdout to stdin in ondelay +#CONFIG_BADEXECVPROTO="no" # system has incorrect execv func decl +#CONFIG_BADEXECVEPROTO="no" # system has incorrect execve func decl +#CONFIG_BADGETOPTPROTO="no" # system has incorrect getopt func decl +#CONFIG_SOCKARGLENTYPE="unsigned long" # call-by-ref arg type for socket funcs +#CONFIG_BADSELECTPROTO="no" # system has way old select func decl +#CONFIG_MAXGID="5999" # maximum permissable GID +#CONFIG_OSFCNH="auto" # control inclusion of + +# +# Dynamic Shared Object (DSO) support. +# +# Beware that adding new support for DSOs may require some +# modifications to the */Makefile.dso files. +# +#DSOSUF="so" # DSO filename suffix +#DSODELAY="-delay_load" # DSO option for delayed loading +#DSOOPTS="-shared -rdata_shared" # options for building DSOs + +# +# Makefile construction parameters. +# +# These should not normally be set; configure will +# deduce the appropriate syntax to use for includes. +# +#MAKECXXOVERRIDE="=.C" # make override stuff for SunPRO C++ +#MAKEDEPINCLUDE="include" # make include for dependency files +#MAKEDSOINCLUDE="#" # make include for DSO support +#MAKEINCLUDE=".include" # make include syntax +#MAKELQUOTE="<" # make include syntax +#MAKERQUOTE=">" # make include syntax +#SETMAKE='MAKE = ${MAKE}' # define if make does not setup $MAKE +#MKDEPCOPTS="" # C compiler opts to supply w/ -M +#MKDEPCXXOPTS="" # C++ compiler opts to supply w/ -M + +# +# General system stuff used by the distribution. +# +# Beware of setting these as configure selects several programs +# based on whether or not they are capable of processing scripts +# included in the distribution (e.g AWK and SCRIPT_SH, SED). +# +#AWK="/bin/awk" # pathname of suitable awk program +#CAT="/bin/cat" # pathname of suitable cat program +#CHGRP="/etc/chgrp" # pathname of suitable chgrp program +#CHMOD="/etc/chmod" # pathname of suitable chmod program +#CHOWN="/etc/chown" # pathname of suitable chown program +#CMP="/bin/cmp" # pathname of suitable cmp program +#COL="/bin/col" # pathname of suitable col program +#CP="/bin/cp" # pathname of suitable cp program +#ECHO="/bin/echo" # pathname of suitable echo program +#GREP="/bin/grep" # pathname of suitable grep program +#LN="/bin/ln" # pathname of suitable ln program +#LN_S="-s" # option to ${LN} to create symlink +#MAN="/usr/bin/man" # pathname of suitable man program +MKDIR="/bin/mkdir -p" # pathname of suitable mkdir program +#MKFIFO="/bin/mkfifo" # pathname of suitable mkfifo program +#MV="/bin/mv" # pathname of suitable mv program +#MV_F="-f" # option to ${MV} to force operation +#RMCMD="/bin/rm" # pathname of suitable rm program +#SED="/bin/sed" # pathname of suitable sed program +#SCRIPT_SH="/bin/sh" # pathname of suitable shell +#SORT="/bin/sort" # pathname of suitable sort program diff --git a/network/hylafax/doinst.sh b/network/hylafax/doinst.sh new file mode 100644 index 0000000000000..33d3c9deca399 --- /dev/null +++ b/network/hylafax/doinst.sh @@ -0,0 +1,37 @@ +config() { + NEW="$1" + OLD="`dirname $NEW`/`basename $NEW .new`" + + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +# Keep same perms on rc.hylafax.new: +if [ -e etc/rc.d/rc.hylafax ]; then + cp -a etc/rc.d/rc.hylafax etc/rc.d/rc.hylafax.new.incoming + cat etc/rc.d/rc.hylafax.new > etc/rc.d/rc.hylafax.new.incoming + mv etc/rc.d/rc.hylafax.new.incoming etc/rc.d/rc.hylafax.new +else + # Install executable otherwise - irrelevant unless user starts in rc.local + chmod 0755 etc/rc.d/rc.hylafax.new +fi + +config etc/rc.d/rc.hylafax.new +config var/spool/hylafax/etc/dialrules.new +config var/spool/hylafax/etc/dialrules.europe.new +config var/spool/hylafax/etc/dialrules.sf-ba.new +config var/spool/hylafax/etc/dpsprinter.ps.new +config var/spool/hylafax/etc/hosts.hfaxd.new + +# We warn about needed configuration to the /etc/inittab file. +printf "\nThe following line will need be added to your /etc/inittab: +please check if it is the correct tty device for the modem, +and if not, change it to the correct one. + m0:23:respawn:/usr/libexec/hylafax/faxgetty ttyS0\n\n" +# Hylafax faxgetty activation + diff --git a/network/hylafax/hylafax.SlackBuild b/network/hylafax/hylafax.SlackBuild index 4ec163c7f9f0a..d6fbdc98c3fe2 100644 --- a/network/hylafax/hylafax.SlackBuild +++ b/network/hylafax/hylafax.SlackBuild @@ -2,7 +2,7 @@ # Slackware build script for hylafax -# Copyright 2007 David Somero +# Copyright 2007 David Somero (dsomero@hotmail.com) Athens,TN USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,18 +21,15 @@ # WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# + # 2007.08.07 # Alan Hicks # General script clean-up and minor improvements -# - -set -e PRGNAM=hylafax -VERSION=4.4.4 +VERSION=${VERSION:-6.0.2} ARCH=${ARCH:-i486} -BUILD=${BUILD:-1} +BUILD=${BUILD:-2} TAG=${TAG:-_SBo} CWD=$(pwd) @@ -40,20 +37,24 @@ TMP=${TMP:-/tmp/SBo} PKG=$TMP/package-$PRGNAM OUTPUT=${OUTPUT:-/tmp} -if [ "${ARCH}" = "i486" ]; then +if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" elif [ "$ARCH" = "i686" ]; then SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" fi +set -e + rm -rf $PKG mkdir -p $TMP $PKG $OUTPUT cd $TMP rm -rf $PRGNAM-$VERSION tar -xvf $CWD/$PRGNAM-$VERSION.tar.gz - cd $PRGNAM-$VERSION chown -R root:root . find . \ @@ -63,54 +64,52 @@ find . \ -exec chmod 644 {} \; # Copy our source for the correct configuration -cp $CWD/config.local $TMP/$PRGNAM-$VERSION/config.local +sed "s|@LIBDIRSUFFIX@|${LIBDIRSUFFIX}|g" \ + < $CWD/config.local.in \ + > $TMP/$PRGNAM-$VERSION/config.local CFLAGS="${SLKCFLAGS}" \ CXXFLAGS="${SLKCFLAGS}" \ -./configure \ +./configure \ + --target=$ARCH-slackware-linux \ --nointeractive \ - --disable-pam \ + --disable-pam \ --with-optmizer=${CFLAGS} make mkdir -p $PKG/etc/rc.d make install ROOT=$PKG -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION -cp -a INSTALL COPYRIGHT CONTRIBUTORS README TODO VERSION doc/* $PKG/usr/doc/$PRGNAM-$VERSION -chmod -R a-w $PKG/usr/doc/$PRGNAM-$VERSION/* - -# We need to move the etc/rc.d/hylafax to the rc.hylafax file and make it executable. -mv $PKG/etc/rc.d/hylafax $PKG/etc/rc.d/rc.hylafax -chmod 755 $PKG/etc/rc.d/rc.hylafax - -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -) +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true # Compress man pages ( cd $PKG/usr/man - find . -type f -exec gzip -9 {} \; - for i in $(find . -type l) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done + find . -type f -exec gzip -9 {} \; + for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done ) +mv $PKG/etc/rc.d/hylafax $PKG/etc/rc.d/rc.hylafax.new +( cd $PKG/var/spool/hylafax/etc + mv dialrules dialrules.new + mv dialrules.europe dialrules.europe.new + mv dialrules.sf-ba dialrules.sf-ba.new + mv dpsprinter.ps dpsprinter.ps.new + mv hosts.hfaxd hosts.hfaxd.new +) + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a \ + INSTALL COPYRIGHT CONTRIBUTORS README TODO VERSION doc/* \ + $PKG/usr/doc/$PRGNAM-$VERSION +sed "s%@VERSION@%$VERSION%g" $CWD/README.SLACKWARE > \ + $PKG/usr/doc/$PRGNAM-$VERSION/README.SLACKWARE cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild -cat $CWD/slack-desc > $PKG/usr/doc/$PRGNAM-$VERSION/slack-desc +chmod -R a-w $PKG/usr/doc/$PRGNAM-$VERSION/* mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc - -# add a configuration notice -cat << EOF >> $PKG/install/doinst.sh -# We warn about needed configuration to the /etc/inittab file. -echo "The following line will need be added to your /etc/inittab," -echo "please check if its the correct tty device for the modem, " -echo "and in case change it to the correct one." -echo " " -echo "m0:23:respawn:/usr/libexec/hylafax/faxgetty ttyS0" -# Hylafax faxgetty activation -EOF +cat $CWD/doinst.sh > $PKG/install/doinst.sh cd $PKG /sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz diff --git a/network/hylafax/hylafax.info b/network/hylafax/hylafax.info index a4d4b5e97bb83..4934c5bb8e00c 100644 --- a/network/hylafax/hylafax.info +++ b/network/hylafax/hylafax.info @@ -1,8 +1,8 @@ PRGNAM="hylafax" -VERSION="4.4.4" +VERSION="6.0.2" HOMEPAGE="http://www.hylafax.org" -DOWNLOAD="ftp://ftp.hylafax.org/source/hylafax-4.4.4.tar.gz" -MD5SUM="4beb3d438ca6c4f00f1d94f9643e6668" +DOWNLOAD="ftp://ftp.hylafax.org/source/hylafax-6.0.2.tar.gz" +MD5SUM="2ab173a3bd50c8ca68d2c84f6e416d52" MAINTAINER="David Somero" -EMAIL="dsomero@hotmail.com " -APPROVED="Erik Hanson" +EMAIL="dsomero@hotmail.com" +APPROVED="rworkman" -- cgit v1.2.3