From 4059b487f2d8f45a3740daaec4d833ff8bbe1287 Mon Sep 17 00:00:00 2001 From: Panagiotis Nikolaou Date: Fri, 29 Sep 2017 09:23:02 +0100 Subject: ham/gqrx-sdr: Updated for version 2.8. Signed-off-by: David Spencer --- ham/gqrx-sdr/README | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'ham/gqrx-sdr/README') diff --git a/ham/gqrx-sdr/README b/ham/gqrx-sdr/README index df5cb6ff451c3..20c5887c81b84 100644 --- a/ham/gqrx-sdr/README +++ b/ham/gqrx-sdr/README @@ -1,7 +1,7 @@ -Gqrx is a software defined radio receiver powered by the +Gqrx is a software defined radio receiver powered by the GNU Radio SDR framework and the Qt graphical toolkit. -Gqrx supports many of the SDR hardware available, -including Funcube Dongles, rtl-sdr, HackRF and USRP devices. +Gqrx supports many of the SDR hardware available, +including Funcube Dongles, rtl-sdr, HackRF and USRP devices. Gqrx has the following features: @@ -17,9 +17,9 @@ Record and playback audio to / from WAV file. Spectrum analyzer mode where all signal processing is disabled. NOTE: -If you use a DVB-T dongle keep in mind newer kernels already -contains a DVB driver, however, we do not want to use this. -The above "modprobe -r dvb_usb_rtl28xxu" command unloads this -from the kernel, however for a permanent solution you will +If you use a DVB-T dongle keep in mind newer kernels already +contains a DVB driver, however, we do not want to use this. +The above "modprobe -r dvb_usb_rtl28xxu" command unloads this +from the kernel, however for a permanent solution you will need to create the following file in /etc/modprobe.d/: rtl.conf and add this line: blacklist dvb_usb_rtl28xxu -- cgit v1.2.3