From 73dfe11e6922c1eba4d54fdd3d6d7e209e38fc51 Mon Sep 17 00:00:00 2001
From: Brian Muramatsu <brian@fhobia.org>
Date: Tue, 11 May 2010 22:53:52 +0200
Subject: graphics/yafray: Added to 12.1 repository

---
 graphics/yafray/README            |  8 ++++
 graphics/yafray/slack-desc        | 19 ++++++++
 graphics/yafray/yafray.SlackBuild | 91 +++++++++++++++++++++++++++++++++++++++
 graphics/yafray/yafray.info       |  8 ++++
 4 files changed, 126 insertions(+)
 create mode 100644 graphics/yafray/README
 create mode 100644 graphics/yafray/slack-desc
 create mode 100644 graphics/yafray/yafray.SlackBuild
 create mode 100644 graphics/yafray/yafray.info

(limited to 'graphics')

diff --git a/graphics/yafray/README b/graphics/yafray/README
new file mode 100644
index 000000000000..2fdf3d036a08
--- /dev/null
+++ b/graphics/yafray/README
@@ -0,0 +1,8 @@
+YafRay is a powerful raytracer, under the LGPL license. It enables you to
+create fantastic images and animations of a photorealistic quality.
+
+YafRay's dependencies are:
+
+libc, libgcc, libstdc++, libjpeg, zlib included in Slackware 12.1. 
+
+scons, libopenexr, and ilmbase available at SlackBuilds.org.
diff --git a/graphics/yafray/slack-desc b/graphics/yafray/slack-desc
new file mode 100644
index 000000000000..00f329994c8b
--- /dev/null
+++ b/graphics/yafray/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+yafray: Yafray (Free Raytracing for the masses)
+yafray:
+yafray: YafRay is a powerful raytracer, under the LGPL license. It enables
+yafray: you to create fantastic images and animations of a photorealistic
+yafray: quality. 
+yafray: 
+yafray: For more information, see: http://www.yafray.org/
+yafray: 
+yafray: 
+yafray: 
+yafray: 
diff --git a/graphics/yafray/yafray.SlackBuild b/graphics/yafray/yafray.SlackBuild
new file mode 100644
index 000000000000..41ca01e25654
--- /dev/null
+++ b/graphics/yafray/yafray.SlackBuild
@@ -0,0 +1,91 @@
+#!/bin/sh
+
+# Slackware build script for yafray
+#
+# This script is very fragile and works around the Scons setup, so be
+# careful when upgrading to a new version!
+#
+# Written by Brian Muramatsu (brian@fhobia.org)
+
+PRGNAM=yafray
+VERSION=0.0.9
+ARCH=${ARCH:-i486}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+# Extracts to "yafray" rather than "yafray-0.0.9" as might be expected.
+tar xvzf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM
+chown -R root:root . 
+chmod -R u+w,go+r-w,a-s .
+
+# SConstruct uses linux-settings.py to parse arguments. In the get_cxxflags,
+# it looks for "arch" and "tune" and doesn't seem to look at the regular 
+# CFLAGS and CXXFLAGS. These are the only optimization flags I saw in
+# linux-settings.py.
+if [ "$ARCH" = "i486" ]; then
+  SCONFLAGS="arch=i486 tune=i486"
+elif [ "$ARCH" = "i586" ]; then
+  SCONFLAGS="arch=i586 tune=i586"
+elif [ "$ARCH" = "i686" ]; then
+  SCONFLAGS="arch=i686 tune=i686"
+fi
+
+# linux-settings.py shows that there is only the "prefix" flag to control
+# where files will be copied to. Set the prefix to the SBo package directory,
+# so that we can work on the package there.
+SCONFLAGS="prefix=$PKG/usr $SCONFLAGS"
+
+# Equivalent to the usual "make" step...
+scons $SCONFLAGS
+
+# The Yafray wiki says you need to put the flags again or else the information
+# about the architecture will be lost, and it will compile it all over again!
+#
+# http://wiki.yafray.org/bin/view.pl/UserDoc/FaqEng#Compilation
+scons $SCONFLAGS install
+
+# Move /usr/etc/gram.yafray to /etc/gram.yafray. Other distributions like
+# Debian, Fedora, and Gentoo seem to do the same. At this point, I don't know
+# what the impact of moving this is, but it does not seem to impede Yafray's
+# function as described in the README.
+mkdir $PKG/etc
+mv $PKG/usr/etc/gram.yafray $PKG/etc/gram.yafray
+rm -rf $PKG/usr/etc
+
+# Yafray's code seems to hardcode /usr/local/lib...so create a symlink from
+# /usr/local/lib/yafray to /usr/lib/yafray. This made Blender work properly
+# with Yafray immediately after installing this package.
+mkdir -p $PKG/usr/local/lib
+ln -sf /usr/lib/yafray $PKG/usr/local/lib/yafray
+
+# Copy over documentation. The only difference is there are some technical
+# documents under the doc directory that are also copied besides the usual
+# suspects.
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a AUTHORS COPYING ChangeLog INSTALL LICENSE NEWS README doc $PKG/usr/doc/$PRGNAM-$VERSION
+find $PKG/usr/doc/$PRGNAM-$VERSION -type f -exec chmod 644 {} \;
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Strip some libraries and binaries
+( cd $PKG
+   find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+   find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Build the package
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/graphics/yafray/yafray.info b/graphics/yafray/yafray.info
new file mode 100644
index 000000000000..5344d7e36766
--- /dev/null
+++ b/graphics/yafray/yafray.info
@@ -0,0 +1,8 @@
+PRGNAM="yafray"
+VERSION="0.0.9"
+HOMEPAGE="http://www.yafray.org/"
+DOWNLOAD="http://www.yafray.org/sec/2/downloads/yafray-0.0.9.tar.gz"
+MD5SUM="7365122e0ca6f439988f51e8b4db935c"
+MAINTAINER="Brian Muramatsu"
+EMAIL="brian@fhobia.org"
+APPROVED="David Somero"
\ No newline at end of file
-- 
cgit v1.2.3