system/freeipmi: Added (system management).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

5 files changed, 184 insertions, 0 deletions

diff --git a/system/freeipmi/README b/system/freeipmi/README
new file mode 100644
index 0000000000000..5805f45eac4c2
--- /dev/null
+++ b/system/freeipmi/README
@@ -0,0 +1,10 @@
+FreeIPMI provides in-band and out-of-band IPMI software based on the
+IPMI v1.5/2.0 specification.
+
+The IPMI specification defines a set of interfaces for platform
+management.  It is utilized by a wide variety of vendors for system
+management on motherboards.  The features of IPMI that most users will
+be interested in are sensor monitoring, remote power control,
+serial-over-LAN (SOL), and system debugging. The FreeIPMI tools and
+libraries in this package should provide users with the ability to
+access and utilize these features.
diff --git a/system/freeipmi/doinst.sh b/system/freeipmi/doinst.sh
new file mode 100644
index 0000000000000..fe318696f2316
--- /dev/null
+++ b/system/freeipmi/doinst.sh
@@ -0,0 +1,22 @@
+
+config() {
+    NEW="$1"
+    OLD="${1%.new}"
+    if [ ! -r $OLD ];
+    then
+        # If there's no config file by that name, mv it over:
+        mv $NEW $OLD
+    elif [ "$(md5sum <$OLD)" = "$(md5sum <$NEW)" ];
+    then
+        # toss the redundant copy
+        rm $NEW
+    fi
+    # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# doinst.sh reads the list of files from ./install/conffiles at install time.
+# ./install/conffiles was generated at build time/
+for cf in $(cat install/conffiles)
+do
+    config $cf.new
+done
diff --git a/system/freeipmi/freeipmi.SlackBuild b/system/freeipmi/freeipmi.SlackBuild
new file mode 100644
index 0000000000000..eb422db3c1d3d
--- /dev/null
+++ b/system/freeipmi/freeipmi.SlackBuild
@@ -0,0 +1,123 @@
+#!/bin/sh
+
+# Copyright 2019, Wayne Cuddy, wcuddyATgmailDOTcom
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#
+# 2019-03-30: Initial Release
+#
+
+PRGNAM=freeipmi
+VERSION=${VERSION:-1.6.3}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+ -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --build=$ARCH-slackware-linux
+
+make
+make install DESTDIR=$PKG
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cd $TMP/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+rm -rf $PKG/usr/share
+
+cd $PKG
+
+mkdir -p etc/rc.d
+# Convert the init script to Slackware style rc scripts.
+for i in etc/init.d/*
+do
+    mv $i etc/rc.d/rc.${i##*/}
+    chmod 644 etc/rc.d/rc.${i##*/}
+done
+
+rmdir etc/init.d
+
+# Don't clobber existing config files.
+for i in $(find etc -type f)
+do
+    mv $i $i.new
+    echo $i
+done 1>>$PKG/install/conffiles
+
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/freeipmi/freeipmi.info b/system/freeipmi/freeipmi.info
new file mode 100644
index 0000000000000..983ae37b2350f
--- /dev/null
+++ b/system/freeipmi/freeipmi.info
@@ -0,0 +1,10 @@
+PRGNAM="freeipmi"
+VERSION="1.6.3"
+HOMEPAGE="https://www.gnu.org/software/freeipmi"
+DOWNLOAD="https://ftp.gnu.org/gnu/freeipmi/freeipmi-1.6.3.tar.gz"
+MD5SUM="b2d97e20db9b81b460ce1b9dad5bf54e"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="Wayne Cuddy"
+EMAIL="wcuddy@gmail.com"
diff --git a/system/freeipmi/slack-desc b/system/freeipmi/slack-desc
new file mode 100644
index 0000000000000..3974cbf3d009e
--- /dev/null
+++ b/system/freeipmi/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+        |-----handy-ruler------------------------------------------------------|
+freeipmi: freeipmi (system management)
+freeipmi:
+freeipmi: Tools which provide in in-band and out-of-band system management via
+freeipmi: the IPMI v1.5/2.0 specification.
+freeipmi:
+freeipmi:
+freeipmi:
+freeipmi:
+freeipmi:
+freeipmi:
+freeipmi: