network/warvox: Removed (Build failure)

7 files changed, 0 insertions, 197 deletions

diff --git a/network/warvox/README b/network/warvox/README
deleted file mode 100644
index afcfc6ae10778..0000000000000
--- a/network/warvox/README
+++ /dev/null
@@ -1,23 +0,0 @@
-WarVOX is a suite of tools for exploring, classifying, and auditing telephone
-systems. Unlike normal wardialing tools, WarVOX works with the actual audio from
-each call and does not use a modem directly. This model allows WarVOX to find
-and classify a wide range of interesting lines, including modems, faxes, voice
-mail boxes, PBXs, loops, dial tones, IVRs, and forwarders. WarVOX provides the
-unique ability to classify all telephone lines in a given range, not just those
-connected to modems, allowing for a comprehensive audit of a telephone system.
-
-This requires iaxclient, lame, and rubygems.
-Once dependencies are in place, open a terminal and, as root, run:
-  # gem install rake sqlite3-ruby mongrel
-and everything should be ready to install WarVOX ;-)
-
-To run WarVOX at startup use something like this in your rc.local:
-
-# Start WarVOX
-if [ -x /etc/rc.d/rc.warvox ]; then
-  /etc/rc.d/rc.warvox start
-fi
-
-and something similar in your rc.local_shutdown to stop the service.
-You can access the web interface at http://127.0.0.1:7777/ or at the port
-specified inside /etc/rc.d/rc.warvox
diff --git a/network/warvox/doinst.sh b/network/warvox/doinst.sh
deleted file mode 100644
index 0c19746d0538a..0000000000000
--- a/network/warvox/doinst.sh
+++ /dev/null
@@ -1,22 +0,0 @@
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-# Keep same perms on rc.warvox.new:
-if [ -e etc/rc.d/rc.warvox ]; then
-  cp -a etc/rc.d/rc.warvox etc/rc.d/rc.warvox.new.incoming
-  cat etc/rc.d/rc.warvox.new > etc/rc.d/rc.warvox.new.incoming
-  mv etc/rc.d/rc.warvox.new.incoming etc/rc.d/rc.warvox.new
-fi
-
-config etc/rc.d/rc.warvox.new
-config etc/warvox.conf.new
-
diff --git a/network/warvox/rc.warvox b/network/warvox/rc.warvox
deleted file mode 100644
index dd083c09bfdbe..0000000000000
--- a/network/warvox/rc.warvox
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/sh
-
-PORT=7777
-PIDFILE="/var/run/warvox/mongrel.pid"
-
-start() {
-  echo "Starting WarVOX: warvox -p ${PORT} -d "
-  warvox -p $PORT -d
-}
-
-stop() {
-  echo "Stopping WarVOX..."
-  kill $(cat $PIDFILE)
-}
-
-case "$1" in
-  start)
-    start
-    ;;
-  stop)
-    stop
-    ;;
-  restart)
-    stop
-    sleep 1
-    start
-    ;;
-  *)
-    echo "Usage: $0 (start|stop|restart)"
-esac
diff --git a/network/warvox/slack-desc b/network/warvox/slack-desc
deleted file mode 100644
index d82934ed2fb2d..0000000000000
--- a/network/warvox/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-      |-----handy-ruler------------------------------------------------------|
-warvox: WarVOX (telephone system pentest suite)
-warvox:
-warvox: WarVOX is a suite of tools for exploring, classifying, and auditing 
-warvox: telephone systems.
-warvox:
-warvox:
-warvox:
-warvox:
-warvox:
-warvox:
-warvox:
diff --git a/network/warvox/warvox b/network/warvox/warvox
deleted file mode 100644
index 7f3536e4684ee..0000000000000
--- a/network/warvox/warvox
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh
-( cd /opt/warvox
-  ./bin/warvox.rb $@
-)
diff --git a/network/warvox/warvox.SlackBuild b/network/warvox/warvox.SlackBuild
deleted file mode 100644
index 7a8494d3c92a7..0000000000000
--- a/network/warvox/warvox.SlackBuild
+++ /dev/null
@@ -1,89 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for WarVOX.
-
-# Copyright 2009-2010 Marco Bonetti <sid77@slackware.it>
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=warvox
-VERSION=${VERSION:-1.0.1}
-ARCH=${ARCH:-i486}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
-cd $PRGNAM-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-make
-
-# Install WarVOX
-mkdir -p $PKG/opt/warvox $PKG/etc
-cp -rv {bin,data,docs,etc,lib,web} $PKG/opt/warvox
-mv $PKG/opt/warvox/etc/warvox.conf $PKG/etc/warvox.conf.new
-( cd $PKG/opt/warvox/etc ; ln -s ../../../etc/warvox.conf . )
-
-# Create a "normal" pid directory
-mkdir -p $PKG/var/run/warvox
-( cd $PKG/opt/warvox/web/tmp
-  rm -rf pids
-  ln -s ../../../../var/run/warvox pids
-)
-
-# Install a launcher
-mkdir -p $PKG/usr/bin
-cat $CWD/warvox > $PKG/usr/bin/warvox
-chmod 755 $PKG/usr/bin/warvox
-
-# Install an rc file
-mkdir -p $PKG/etc/rc.d
-cat $CWD/rc.warvox > $PKG/etc/rc.d/rc.warvox.new
-chmod 0755 $PKG/etc/rc.d/rc.warvox.new
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-mkdir -p $PKG/usr/doc
-mv $PKG/opt/warvox/docs $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-( cd $PKG/opt/warvox ; ln -s ../../usr/doc/$PRGNAM-$VERSION docs )
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-cat $CWD/doinst.sh > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/network/warvox/warvox.info b/network/warvox/warvox.info
deleted file mode 100644
index 1f8395990577a..0000000000000
--- a/network/warvox/warvox.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="warvox"
-VERSION="1.0.1"
-HOMEPAGE="http://warvox.org/"
-DOWNLOAD="http://warvox.org/releases/warvox-1.0.1.tar.gz"
-MD5SUM="5b36ac46dd2a89a2037eb5be46209f9b"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-MAINTAINER="Marco Bonetti"
-EMAIL="sid77@slackware.it"
-APPROVED="rworkman"