misc/temper: Added. A USB Temperature Sensor Linux Driver.

Signed-off-by: Michiel van Wessem <michiel@slackbuilds.org>

5 files changed, 204 insertions, 0 deletions

diff --git a/misc/temper/README b/misc/temper/README
new file mode 100644
index 0000000000000..fe02e73bd3c72
--- /dev/null
+++ b/misc/temper/README
@@ -0,0 +1,10 @@
+TEMPer Temperature Sensor Linux Driver
+
+TEMPer USB Thermometer interface driver and utility. 
+
+The temper binary outputs temperatures as measured by the USB thermometer.
+
+The code has been patched to work with the newest versions of the USB stick 
+with code corrections from the comments section of the homepage. Also 
+implemented changes for greater ease of parsing with standard tools (awk 
+etc.).
diff --git a/misc/temper/slack-desc b/misc/temper/slack-desc
new file mode 100644
index 0000000000000..cdafa35337cb7
--- /dev/null
+++ b/misc/temper/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+       |-----handy-ruler--------------------------------------------------|
+temper: TEMPer Temperature Sensor Linux Driver
+temper:
+temper: Driver and utility to output temperature readings from the TEMPer
+temper: USB thermometer. This is for the HID version of TEMPer (not the 
+temper: serial version). 
+temper:
+temper:
+temper:
+temper:
+temper:
+temper:
diff --git a/misc/temper/temper-1.0.diff b/misc/temper/temper-1.0.diff
new file mode 100644
index 0000000000000..4f9943aad09a6
--- /dev/null
+++ b/misc/temper/temper-1.0.diff
@@ -0,0 +1,70 @@
+--- temper-1.0/temper.c	2009-10-17 08:26:46.000000000 +0100
++++ temper-1.0.new/temper.c	2011-02-06 16:49:24.511084503 +0000
+@@ -49,7 +49,7 @@
+ 
+ 	t = calloc(1, sizeof(*t));
+ 	t->device = dev;
+-	t->debug = debug;
++	t->debug = 0;
+ 	t->timeout = timeout;
+ 	t->handle = usb_open(t->device);
+ 	if(!t->handle) {
+@@ -190,7 +190,7 @@
+ int
+ TemperGetTemperatureInC(Temper *t, float *tempC)
+ {
+-	char buf[256];
++	unsigned char buf[256];
+ 	int ret, temperature, i;
+ 
+ 	TemperSendCommand(t, 10, 11, 12, 13, 0, 0, 2, 0);
+@@ -204,9 +204,7 @@
+ 		return -1;
+ 	}
+ 
+-	temperature = (buf[1] & 0xFF) + (buf[0] << 8);	
+-	temperature += 1152;			// calibration value
+-	*tempC = temperature * (125.0 / 32000.0);
++	*tempC=buf[0]+((float)buf[1])/256;
+ 	return 0;
+ }
+ 
+@@ -253,29 +251,15 @@
+ 	TemperSendCommand(t, 0, 0, 0, 0, 0, 0, 0, 0);
+ */
+ 
+-	bzero(buf, 256);
+-	ret = TemperGetOtherStuff(t, buf, 256);
+-	printf("Other Stuff (%d bytes):\n", ret);
+-	for(i = 0; i < ret; i++) {
+-		printf(" %02x", buf[i] & 0xFF);
+-		if(i % 16 == 15) {
+-			printf("\n");
+-		}
+-	}
+-	printf("\n");
+-
+-	for(;;) {
+-		float tempc;
+-
+-		if(TemperGetTemperatureInC(t, &tempc) < 0) {
+-			perror("TemperGetTemperatureInC");
+-			exit(1);
+-		}
+-		printf("temperature %.2fF %.2fC\n", (9.0 / 5.0 * tempc + 32.0),
+-		       tempc);
+-		sleep(10);
+-	}
+-	return 0;
++	float tempc;
++
++	if(TemperGetTemperatureInC(t, &tempc) < 0) {
++		perror("TemperGetTemperatureInC");
++		exit(1);
++	}
++	printf("temperature %.2fF %.2fC\n", (9.0 / 5.0 * tempc + 32.0),
++		tempc);
++    fflush(stdout); /* flush the stdout buffer */
+ }
+ 
+ #endif
diff --git a/misc/temper/temper.SlackBuild b/misc/temper/temper.SlackBuild
new file mode 100644
index 0000000000000..05f20c05548a7
--- /dev/null
+++ b/misc/temper/temper.SlackBuild
@@ -0,0 +1,95 @@
+#!/bin/sh
+
+# Slackware build script for temper.
+# 
+# Copyright 2011 Pierre Cazenave <pwcazenave {at} gmail [dot] com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=temper
+VERSION=${VERSION:-1.0}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tgz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+chmod -R u+w,go+r-w,a-s .
+
+# Patch code for newer versions of the USB thermometer with suggestions from
+# homepage's comments. Patch also turns off debugging mode.
+patch -p1 < $CWD/$PRGNAM-$VERSION.diff
+
+export CFLAGS="$SLKCFLAGS"
+make clean
+make
+
+mkdir -p $PKG/usr/bin
+install -m 0755 temper $PKG/usr/bin
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Install the udev rule file.
+mkdir -p $PKG/lib/udev/rules.d
+install -m 644 99-tempsensor.rules $PKG/lib/udev/rules.d
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+cat $CWD/README > $PKG/usr/doc/$PRGNAM-$VERSION/README$TAG
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/misc/temper/temper.info b/misc/temper/temper.info
new file mode 100644
index 0000000000000..bbd31a29337e7
--- /dev/null
+++ b/misc/temper/temper.info
@@ -0,0 +1,10 @@
+PRGNAM="temper"
+VERSION="1.0"
+HOMEPAGE="http://relavak.wordpress.com/2009/10/17/temper-temperature-sensor-linux-driver/"
+DOWNLOAD="http://www.relavak.com/downloads/temper-1.0.tgz"
+MD5SUM="aab4888f351e110e252335ab5dc143f4"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="Pierre Cazenave"
+EMAIL="pwcazenave <at> gmail {dot} com"
+APPROVED="Michiel van Wessem"