path: root/include/migration/migration.h

/*
 * QEMU live migration
 *
 * Copyright IBM, Corp. 2008
 *
 * Authors:
 *  Anthony Liguori   <aliguori@us.ibm.com>
 *
 * This work is licensed under the terms of the GNU GPL, version 2.  See
 * the COPYING file in the top-level directory.
 *
 */

#ifndef QEMU_MIGRATION_H
#define QEMU_MIGRATION_H

#include "qapi/qmp/qdict.h"
#include "qemu-common.h"
#include "qemu/thread.h"
#include "qemu/notify.h"
#include "qapi/error.h"
#include "migration/vmstate.h"
#include "qapi-types.h"
#include "exec/cpu-common.h"

#define QEMU_VM_FILE_MAGIC           0x5145564d
#define QEMU_VM_FILE_VERSION_COMPAT  0x00000002
#define QEMU_VM_FILE_VERSION         0x00000003

#define QEMU_VM_EOF                  0x00
#define QEMU_VM_SECTION_START        0x01
#define QEMU_VM_SECTION_PART         0x02
#define QEMU_VM_SECTION_END          0x03
#define QEMU_VM_SECTION_FULL         0x04
#define QEMU_VM_SUBSECTION           0x05
#define QEMU_VM_VMDESCRIPTION        0x06
#define QEMU_VM_CONFIGURATION        0x07
#define QEMU_VM_COMMAND              0x08
#define QEMU_VM_SECTION_FOOTER       0x7e

struct MigrationParams {
    bool blk;
    bool shared;
};

/* Messages sent on the return path from destination to source */
enum mig_rp_message_type {
    MIG_RP_MSG_INVALID = 0,  /* Must be 0 */
    MIG_RP_MSG_SHUT,         /* sibling will not send any more RP messages */
    MIG_RP_MSG_PONG,         /* Response to a PING; data (seq: be32 ) */

    MIG_RP_MSG_MAX
};

typedef QLIST_HEAD(, LoadStateEntry) LoadStateEntry_Head;

/* The current postcopy state is read/set by postcopy_state_get/set
 * which update it atomically.
 * The state is updated as postcopy messages are received, and
 * in general only one thread should be writing to the state at any one
 * time, initially the main thread and then the listen thread;
 * Corner cases are where either thread finishes early and/or errors.
 * The state is checked as messages are received to ensure that
 * the source is sending us messages in the correct order.
 * The state is also used by the RAM reception code to know if it
 * has to place pages atomically, and the cleanup code at the end of
 * the main thread to know if it has to delay cleanup until the end
 * of postcopy.
 */
typedef enum {
    POSTCOPY_INCOMING_NONE = 0,  /* Initial state - no postcopy */
    POSTCOPY_INCOMING_ADVISE,
    POSTCOPY_INCOMING_DISCARD,
    POSTCOPY_INCOMING_LISTENING,
    POSTCOPY_INCOMING_RUNNING,
    POSTCOPY_INCOMING_END
} PostcopyState;

/* State for the incoming migration */
struct MigrationIncomingState {
    QEMUFile *from_src_file;

    /*
     * Free at the start of the main state load, set as the main thread finishes
     * loading state.
     */
    QemuEvent main_thread_load_event;

    QEMUFile *to_src_file;
    QemuMutex rp_mutex;    /* We send replies from multiple threads */

    /* See savevm.c */
    LoadStateEntry_Head loadvm_handlers;
};

MigrationIncomingState *migration_incoming_get_current(void);
MigrationIncomingState *migration_incoming_state_new(QEMUFile *f);
void migration_incoming_state_destroy(void);

struct MigrationState
{
    int64_t bandwidth_limit;
    size_t bytes_xfer;
    size_t xfer_limit;
    QemuThread thread;
    QEMUBH *cleanup_bh;
    QEMUFile *file;
    int parameters[MIGRATION_PARAMETER_MAX];

    int state;
    MigrationParams params;

    /* State related to return path */
    struct {
        QEMUFile     *from_dst_file;
        QemuThread    rp_thread;
        bool          error;
    } rp_state;

    double mbps;
    int64_t total_time;
    int64_t downtime;
    int64_t expected_downtime;
    int64_t dirty_pages_rate;
    int64_t dirty_bytes_rate;
    bool enabled_capabilities[MIGRATION_CAPABILITY_MAX];
    int64_t xbzrle_cache_size;
    int64_t setup_time;
    int64_t dirty_sync_count;

    /* Flag set once the migration has been asked to enter postcopy */
    bool start_postcopy;
};

void process_incoming_migration(QEMUFile *f);

void qemu_start_incoming_migration(const char *uri, Error **errp);

uint64_t migrate_max_downtime(void);

void exec_start_incoming_migration(const char *host_port, Error **errp);

void exec_start_outgoing_migration(MigrationState *s, const char *host_port, Error **errp);

void tcp_start_incoming_migration(const char *host_port, Error **errp);

void tcp_start_outgoing_migration(MigrationState *s, const char *host_port, Error **errp);

void unix_start_incoming_migration(const char *path, Error **errp);

void unix_start_outgoing_migration(MigrationState *s, const char *path, Error **errp);

void fd_start_incoming_migration(const char *path, Error **errp);

void fd_start_outgoing_migration(MigrationState *s, const char *fdname, Error **errp);

void rdma_start_outgoing_migration(void *opaque, const char *host_port, Error **errp);

void rdma_start_incoming_migration(const char *host_port, Error **errp);

void migrate_fd_error(MigrationState *s);

void migrate_fd_connect(MigrationState *s);

int migrate_fd_close(MigrationState *s);

void add_migration_state_change_notifier(Notifier *notify);
void remove_migration_state_change_notifier(Notifier *notify);
MigrationState *migrate_init(const MigrationParams *params);
bool migration_in_setup(MigrationState *);
bool migration_has_finished(MigrationState *);
bool migration_has_failed(MigrationState *);
MigrationState *migrate_get_current(void);

void migrate_compress_threads_create(void);
void migrate_compress_threads_join(void);
void migrate_decompress_threads_create(void);
void migrate_decompress_threads_join(void);
uint64_t ram_bytes_remaining(void);
uint64_t ram_bytes_transferred(void);
uint64_t ram_bytes_total(void);
void free_xbzrle_decoded_buf(void);

void acct_update_position(QEMUFile *f, size_t size, bool zero);

uint64_t dup_mig_bytes_transferred(void);
uint64_t dup_mig_pages_transferred(void);
uint64_t skipped_mig_bytes_transferred(void);
uint64_t skipped_mig_pages_transferred(void);
uint64_t norm_mig_bytes_transferred(void);
uint64_t norm_mig_pages_transferred(void);
uint64_t xbzrle_mig_bytes_transferred(void);
uint64_t xbzrle_mig_pages_transferred(void);
uint64_t xbzrle_mig_pages_overflow(void);
uint64_t xbzrle_mig_pages_cache_miss(void);
double xbzrle_mig_cache_miss_rate(void);

void ram_handle_compressed(void *host, uint8_t ch, uint64_t size);
void ram_debug_dump_bitmap(unsigned long *todump, bool expected);

/**
 * @migrate_add_blocker - prevent migration from proceeding
 *
 * @reason - an error to be returned whenever migration is attempted
 */
void migrate_add_blocker(Error *reason);

/**
 * @migrate_del_blocker - remove a blocking error from migration
 *
 * @reason - the error blocking migration
 */
void migrate_del_blocker(Error *reason);

bool migrate_postcopy_ram(void);
bool migrate_zero_blocks(void);

bool migrate_auto_converge(void);

int xbzrle_encode_buffer(uint8_t *old_buf, uint8_t *new_buf, int slen,
                         uint8_t *dst, int dlen);
int xbzrle_decode_buffer(uint8_t *src, int slen, uint8_t *dst, int dlen);

int migrate_use_xbzrle(void);
int64_t migrate_xbzrle_cache_size(void);

int64_t xbzrle_cache_resize(int64_t new_size);

bool migrate_use_compression(void);
int migrate_compress_level(void);
int migrate_compress_threads(void);
int migrate_decompress_threads(void);
bool migrate_use_events(void);

/* Sending on the return path - generic and then for each message type */
void migrate_send_rp_message(MigrationIncomingState *mis,
                             enum mig_rp_message_type message_type,
                             uint16_t len, void *data);
void migrate_send_rp_shut(MigrationIncomingState *mis,
                          uint32_t value);
void migrate_send_rp_pong(MigrationIncomingState *mis,
                          uint32_t value);

void ram_control_before_iterate(QEMUFile *f, uint64_t flags);
void ram_control_after_iterate(QEMUFile *f, uint64_t flags);
void ram_control_load_hook(QEMUFile *f, uint64_t flags, void *data);

/* Whenever this is found in the data stream, the flags
 * will be passed to ram_control_load_hook in the incoming-migration
 * side. This lets before_ram_iterate/after_ram_iterate add
 * transport-specific sections to the RAM migration data.
 */
#define RAM_SAVE_FLAG_HOOK     0x80

#define RAM_SAVE_CONTROL_NOT_SUPP -1000
#define RAM_SAVE_CONTROL_DELAYED  -2000

size_t ram_control_save_page(QEMUFile *f, ram_addr_t block_offset,
                             ram_addr_t offset, size_t size,
                             uint64_t *bytes_sent);

void ram_mig_init(void);
void savevm_skip_section_footers(void);
void register_global_state(void);
void global_state_set_optional(void);
void savevm_skip_configuration(void);
int global_state_store(void);
void global_state_store_running(void);

PostcopyState postcopy_state_get(void);
/* Set the state and return the old state */
PostcopyState postcopy_state_set(PostcopyState new_state);
#endif