# -*- Mode: Python -*- # # QAPI Schema ## # @NameInfo: # # Guest name information. # # @name: #optional The name of the guest # # Since 0.14.0 ## { 'type': 'NameInfo', 'data': {'*name': 'str'} } ## # @query-name: # # Return the name information of a guest. # # Returns: @NameInfo of the guest # # Since 0.14.0 ## { 'command': 'query-name', 'returns': 'NameInfo' } ## # @VersionInfo: # # A description of QEMU's version. # # @qemu.major: The major version of QEMU # # @qemu.minor: The minor version of QEMU # # @qemu.micro: The micro version of QEMU. By current convention, a micro # version of 50 signifies a development branch. A micro version # greater than or equal to 90 signifies a release candidate for # the next minor version. A micro version of less than 50 # signifies a stable release. # # @package: QEMU will always set this field to an empty string. Downstream # versions of QEMU should set this to a non-empty string. The # exact format depends on the downstream however it highly # recommended that a unique name is used. # # Since: 0.14.0 ## { 'type': 'VersionInfo', 'data': {'qemu': {'major': 'int', 'minor': 'int', 'micro': 'int'}, 'package': 'str'} } ## # @query-version: # # Returns the current version of QEMU. # # Returns: A @VersionInfo object describing the current version of QEMU. # # Since: 0.14.0 ## { 'command': 'query-version', 'returns': 'VersionInfo' } ## # @KvmInfo: # # Information about support for KVM acceleration # # @enabled: true if KVM acceleration is active # # @present: true if KVM acceleration is built into this executable # # Since: 0.14.0 ## { 'type': 'KvmInfo', 'data': {'enabled': 'bool', 'present': 'bool'} } ## # @query-kvm: # # Returns information about KVM acceleration # # Returns: @KvmInfo # # Since: 0.14.0 ## { 'command': 'query-kvm', 'returns': 'KvmInfo' } ## # @RunState # # An enumation of VM run states. # # @debug: QEMU is running on a debugger # # @inmigrate: guest is paused waiting for an incoming migration # # @internal-error: An internal error that prevents further guest execution # has occurred # # @io-error: the last IOP has failed and the device is configured to pause # on I/O errors # # @paused: guest has been paused via the 'stop' command # # @postmigrate: guest is paused following a successful 'migrate' # # @prelaunch: QEMU was started with -S and guest has not started # # @finish-migrate: guest is paused to finish the migration process # # @restore-vm: guest is paused to restore VM state # # @running: guest is actively running # # @save-vm: guest is paused to save the VM state # # @shutdown: guest is shut down (and -no-shutdown is in use) # # @watchdog: the watchdog action is configured to pause and has been triggered ## { 'enum': 'RunState', 'data': [ 'debug', 'inmigrate', 'internal-error', 'io-error', 'paused', 'postmigrate', 'prelaunch', 'finish-migrate', 'restore-vm', 'running', 'save-vm', 'shutdown', 'watchdog' ] } ## # @StatusInfo: # # Information about VCPU run state # # @running: true if all VCPUs are runnable, false if not runnable # # @singlestep: true if VCPUs are in single-step mode # # @status: the virtual machine @RunState # # Since: 0.14.0 # # Notes: @singlestep is enabled through the GDB stub ## { 'type': 'StatusInfo', 'data': {'running': 'bool', 'singlestep': 'bool', 'status': 'RunState'} } ## # @query-status: # # Query the run status of all VCPUs # # Returns: @StatusInfo reflecting all VCPUs # # Since: 0.14.0 ## { 'command': 'query-status', 'returns': 'StatusInfo' } ## # @UuidInfo: # # Guest UUID information. # # @UUID: the UUID of the guest # # Since: 0.14.0 # # Notes: If no UUID was specified for the guest, a null UUID is returned. ## { 'type': 'UuidInfo', 'data': {'UUID': 'str'} } ## # @query-uuid: # # Query the guest UUID information. # # Returns: The @UuidInfo for the guest # # Since 0.14.0 ## { 'command': 'query-uuid', 'returns': 'UuidInfo' } ## # @ChardevInfo: # # Information about a character device. # # @label: the label of the character device # # @filename: the filename of the character device # # Notes: @filename is encoded using the QEMU command line character device # encoding. See the QEMU man page for details. # # Since: 0.14.0 ## { 'type': 'ChardevInfo', 'data': {'label': 'str', 'filename': 'str'} } ## # @query-chardev: # # Returns information about current character devices. # # Returns: a list of @ChardevInfo # # Since: 0.14.0 ## { 'command': 'query-chardev', 'returns': ['ChardevInfo'] } ## # @CommandInfo: # # Information about a QMP command # # @name: The command name # # Since: 0.14.0 ## { 'type': 'CommandInfo', 'data': {'name': 'str'} } ## # @query-commands: # # Return a list of supported QMP commands by this server # # Returns: A list of @CommandInfo for all supported commands # # Since: 0.14.0 ## { 'command': 'query-commands', 'returns': ['CommandInfo'] } ## # @MigrationStats # # Detailed migration status. # # @transferred: amount of bytes already transferred to the target VM # # @remaining: amount of bytes remaining to be transferred to the target VM # # @total: total amount of bytes involved in the migration process # # Since: 0.14.0. ## { 'type': 'MigrationStats', 'data': {'transferred': 'int', 'remaining': 'int', 'total': 'int' } } ## # @MigrationInfo # # Information about current migration process. # # @status: #optional string describing the current migration status. # As of 0.14.0 this can be 'active', 'completed', 'failed' or # 'cancelled'. If this field is not returned, no migration process # has been initiated # # @ram: #optional @MigrationStats containing detailed migration status, # only returned if status is 'active' # # @disk: #optional @MigrationStats containing detailed disk migration # status, only returned if status is 'active' and it is a block # migration # # Since: 0.14.0 ## { 'type': 'MigrationInfo', 'data': {'*status': 'str', '*ram': 'MigrationStats', '*disk': 'MigrationStats'} } ## # @query-migrate # # Returns information about current migration process. # # Returns: @MigrationInfo # # Since: 0.14.0 ## { 'command': 'query-migrate', 'returns': 'MigrationInfo' } ## # @MouseInfo: # # Information about a mouse device. # # @name: the name of the mouse device # # @index: the index of the mouse device # # @current: true if this device is currently receiving mouse events # # @absolute: true if this device supports absolute coordinates as input # # Since: 0.14.0 ## { 'type': 'MouseInfo', 'data': {'name': 'str', 'index': 'int', 'current': 'bool', 'absolute': 'bool'} } ## # @query-mice: # # Returns information about each active mouse device # # Returns: a list of @MouseInfo for each device # # Since: 0.14.0 ## { 'command': 'query-mice', 'returns': ['MouseInfo'] } ## # @CpuInfo: # # Information about a virtual CPU # # @CPU: the index of the virtual CPU # # @current: this only exists for backwards compatible and should be ignored # # @halted: true if the virtual CPU is in the halt state. Halt usually refers # to a processor specific low power mode. # # @pc: #optional If the target is i386 or x86_64, this is the 64-bit instruction # pointer. # If the target is Sparc, this is the PC component of the # instruction pointer. # # @nip: #optional If the target is PPC, the instruction pointer # # @npc: #optional If the target is Sparc, the NPC component of the instruction # pointer # # @PC: #optional If the target is MIPS, the instruction pointer # # @thread_id: ID of the underlying host thread # # Since: 0.14.0 # # Notes: @halted is a transient state that changes frequently. By the time the # data is sent to the client, the guest may no longer be halted. ## { 'type': 'CpuInfo', 'data': {'CPU': 'int', 'current': 'bool', 'halted': 'bool', '*pc': 'int', '*nip': 'int', '*npc': 'int', '*PC': 'int', 'thread_id': 'int'} } ## # @query-cpus: # # Returns a list of information about each virtual CPU. # # Returns: a list of @CpuInfo for each virtual CPU # # Since: 0.14.0 ## { 'command': 'query-cpus', 'returns': ['CpuInfo'] } ## # @BlockDeviceInfo: # # Information about the backing device for a block device. # # @file: the filename of the backing device # # @ro: true if the backing device was open read-only # # @drv: the name of the block format used to open the backing device. As of # 0.14.0 this can be: 'blkdebug', 'bochs', 'cloop', 'cow', 'dmg', # 'file', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device', # 'host_floppy', 'http', 'https', 'nbd', 'parallels', 'qcow', # 'qcow2', 'raw', 'tftp', 'vdi', 'vmdk', 'vpc', 'vvfat' # # @backing_file: #optional the name of the backing file (for copy-on-write) # # @encrypted: true if the backing device is encrypted # # @bps: total throughput limit in bytes per second is specified # # @bps_rd: read throughput limit in bytes per second is specified # # @bps_wr: write throughput limit in bytes per second is specified # # @iops: total I/O operations per second is specified # # @iops_rd: read I/O operations per second is specified # # @iops_wr: write I/O operations per second is specified # # Since: 0.14.0 # # Notes: This interface is only found in @BlockInfo. ## { 'type': 'BlockDeviceInfo', 'data': { 'file': 'str', 'ro': 'bool', 'drv': 'str', '*backing_file': 'str', 'encrypted': 'bool', 'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int', 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int'} } ## # @BlockDeviceIoStatus: # # An enumeration of block device I/O status. # # @ok: The last I/O operation has succeeded # # @failed: The last I/O operation has failed # # @nospace: The last I/O operation has failed due to a no-space condition # # Since: 1.0 ## { 'enum': 'BlockDeviceIoStatus', 'data': [ 'ok', 'failed', 'nospace' ] } ## # @BlockInfo: # # Block device information. This structure describes a virtual device and # the backing device associated with it. # # @device: The device name associated with the virtual device. # # @type: This field is returned only for compatibility reasons, it should # not be used (always returns 'unknown') # # @removable: True if the device supports removable media. # # @locked: True if the guest has locked this device from having its media # removed # # @tray_open: #optional True if the device has a tray and it is open # (only present if removable is true) # # @io-status: #optional @BlockDeviceIoStatus. Only present if the device # supports it and the VM is configured to stop on errors # # @inserted: #optional @BlockDeviceInfo describing the device if media is # present # # Since: 0.14.0 ## { 'type': 'BlockInfo', 'data': {'device': 'str', 'type': 'str', 'removable': 'bool', 'locked': 'bool', '*inserted': 'BlockDeviceInfo', '*tray_open': 'bool', '*io-status': 'BlockDeviceIoStatus'} } ## # @query-block: # # Get a list of BlockInfo for all virtual block devices. # # Returns: a list of @BlockInfo describing each virtual block device # # Since: 0.14.0 ## { 'command': 'query-block', 'returns': ['BlockInfo'] } ## # @BlockDeviceStats: # # Statistics of a virtual block device or a block backing device. # # @rd_bytes: The number of bytes read by the device. # # @wr_bytes: The number of bytes written by the device. # # @rd_operations: The number of read operations performed by the device. # # @wr_operations: The number of write operations performed by the device. # # @flush_operations: The number of cache flush operations performed by the # device (since 0.15.0) # # @flush_total_time_ns: Total time spend on cache flushes in nano-seconds # (since 0.15.0). # # @wr_total_time_ns: Total time spend on writes in nano-seconds (since 0.15.0). # # @rd_total_time_ns: Total_time_spend on reads in nano-seconds (since 0.15.0). # # @wr_highest_offset: The offset after the greatest byte written to the # device. The intended use of this information is for # growable sparse files (like qcow2) that are used on top # of a physical device. # # Since: 0.14.0 ## { 'type': 'BlockDeviceStats', 'data': {'rd_bytes': 'int', 'wr_bytes': 'int', 'rd_operations': 'int', 'wr_operations': 'int', 'flush_operations': 'int', 'flush_total_time_ns': 'int', 'wr_total_time_ns': 'int', 'rd_total_time_ns': 'int', 'wr_highest_offset': 'int' } } ## # @BlockStats: # # Statistics of a virtual block device or a block backing device. # # @device: #optional If the stats are for a virtual block device, the name # corresponding to the virtual block device. # # @stats: A @BlockDeviceStats for the device. # # @parent: #optional This may point to the backing block device if this is a # a virtual block device. If it's a backing block, this will point # to the backing file is one is present. # # Since: 0.14.0 ## { 'type': 'BlockStats', 'data': {'*device': 'str', 'stats': 'BlockDeviceStats', '*parent': 'BlockStats'} } ## # @query-blockstats: # # Query the @BlockStats for all virtual block devices. # # Returns: A list of @BlockStats for each virtual block devices. # # Since: 0.14.0 ## { 'command': 'query-blockstats', 'returns': ['BlockStats'] } ## # @VncClientInfo: # # Information about a connected VNC client. # # @host: The host name of the client. QEMU tries to resolve this to a DNS name # when possible. # # @family: 'ipv6' if the client is connected via IPv6 and TCP # 'ipv4' if the client is connected via IPv4 and TCP # 'unix' if the client is connected via a unix domain socket # 'unknown' otherwise # # @service: The service name of the client's port. This may depends on the # host system's service database so symbolic names should not be # relied on. # # @x509_dname: #optional If x509 authentication is in use, the Distinguished # Name of the client. # # @sasl_username: #optional If SASL authentication is in use, the SASL username # used for authentication. # # Since: 0.14.0 ## { 'type': 'VncClientInfo', 'data': {'host': 'str', 'family': 'str', 'service': 'str', '*x509_dname': 'str', '*sasl_username': 'str'} } ## # @VncInfo: # # Information about the VNC session. # # @enabled: true if the VNC server is enabled, false otherwise # # @host: #optional The hostname the VNC server is bound to. This depends on # the name resolution on the host and may be an IP address. # # @family: #optional 'ipv6' if the host is listening for IPv6 connections # 'ipv4' if the host is listening for IPv4 connections # 'unix' if the host is listening on a unix domain socket # 'unknown' otherwise # # @service: #optional The service name of the server's port. This may depends # on the host system's service database so symbolic names should not # be relied on. # # @auth: #optional the current authentication type used by the server # 'none' if no authentication is being used # 'vnc' if VNC authentication is being used # 'vencrypt+plain' if VEncrypt is used with plain text authentication # 'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication # 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication # 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth # 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth # 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth # 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth # 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth # 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth # # @clients: a list of @VncClientInfo of all currently connected clients # # Since: 0.14.0 ## { 'type': 'VncInfo', 'data': {'enabled': 'bool', '*host': 'str', '*family': 'str', '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']} } ## # @query-vnc: # # Returns information about the current VNC server # # Returns: @VncInfo # If VNC support is not compiled in, FeatureDisabled # # Since: 0.14.0 ## { 'command': 'query-vnc', 'returns': 'VncInfo' } ## # @SpiceChannel # # Information about a SPICE client channel. # # @host: The host name of the client. QEMU tries to resolve this to a DNS name # when possible. # # @family: 'ipv6' if the client is connected via IPv6 and TCP # 'ipv4' if the client is connected via IPv4 and TCP # 'unix' if the client is connected via a unix domain socket # 'unknown' otherwise # # @port: The client's port number. # # @connection-id: SPICE connection id number. All channels with the same id # belong to the same SPICE session. # # @connection-type: SPICE channel type number. "1" is the main control channel, # filter for this one if you want track spice sessions only # # @channel-id: SPICE channel ID number. Usually "0", might be different needed # when multiple channels of the same type exist, such as multiple # display channels in a multihead setup # # @tls: true if the channel is encrypted, false otherwise. # # Since: 0.14.0 ## { 'type': 'SpiceChannel', 'data': {'host': 'str', 'family': 'str', 'port': 'str', 'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int', 'tls': 'bool'} } ## # @SpiceInfo # # Information about the SPICE session. # # @enabled: true if the SPICE server is enabled, false otherwise # # @host: #optional The hostname the SPICE server is bound to. This depends on # the name resolution on the host and may be an IP address. # # @port: #optional The SPICE server's port number. # # @compiled-version: #optional SPICE server version. # # @tls-port: #optional The SPICE server's TLS port number. # # @auth: #optional the current authentication type used by the server # 'none' if no authentication is being used # 'spice' (TODO: describe) # # @channels: a list of @SpiceChannel for each active spice channel # # Since: 0.14.0 ## { 'type': 'SpiceInfo', 'data': {'enabled': 'bool', '*host': 'str', '*port': 'int', '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str', '*channels': ['SpiceChannel']} } ## # @query-spice # # Returns information about the current SPICE server # # Returns: @SpiceInfo # # Since: 0.14.0 ## { 'command': 'query-spice', 'returns': 'SpiceInfo' } ## # @BalloonInfo: # # Information about the guest balloon device. # # @actual: the number of bytes the balloon currently contains # # @mem_swapped_in: #optional number of pages swapped in within the guest # # @mem_swapped_out: #optional number of pages swapped out within the guest # # @major_page_faults: #optional number of major page faults within the guest # # @minor_page_faults: #optional number of minor page faults within the guest # # @free_mem: #optional amount of memory (in bytes) free in the guest # # @total_mem: #optional amount of memory (in bytes) visible to the guest # # Since: 0.14.0 # # Notes: all current versions of QEMU do not fill out optional information in # this structure. ## { 'type': 'BalloonInfo', 'data': {'actual': 'int', '*mem_swapped_in': 'int', '*mem_swapped_out': 'int', '*major_page_faults': 'int', '*minor_page_faults': 'int', '*free_mem': 'int', '*total_mem': 'int'} } ## # @query-balloon: # # Return information about the balloon device. # # Returns: @BalloonInfo on success # If the balloon driver is enabled but not functional because the KVM # kernel module cannot support it, KvmMissingCap # If no balloon device is present, DeviceNotActive # # Since: 0.14.0 ## { 'command': 'query-balloon', 'returns': 'BalloonInfo' } ## # @PciMemoryRange: # # A PCI device memory region # # @base: the starting address (guest physical) # # @limit: the ending address (guest physical) # # Since: 0.14.0 ## { 'type': 'PciMemoryRange', 'data': {'base': 'int', 'limit': 'int'} } ## # @PciMemoryRegion # # Information about a PCI device I/O region. # # @bar: the index of the Base Address Register for this region # # @type: 'io' if the region is a PIO region # 'memory' if the region is a MMIO region # # @prefetch: #optional if @type is 'memory', true if the memory is prefetchable # # @mem_type_64: #optional if @type is 'memory', true if the BAR is 64-bit # # Since: 0.14.0 ## { 'type': 'PciMemoryRegion', 'data': {'bar': 'int', 'type': 'str', 'address': 'int', 'size': 'int', '*prefetch': 'bool', '*mem_type_64': 'bool' } } ## # @PciBridgeInfo: # # Information about a PCI Bridge device # # @bus.number: primary bus interface number. This should be the number of the # bus the device resides on. # # @bus.secondary: secondary bus interface number. This is the number of the # main bus for the bridge # # @bus.subordinate: This is the highest number bus that resides below the # bridge. # # @bus.io_range: The PIO range for all devices on this bridge # # @bus.memory_range: The MMIO range for all devices on this bridge # # @bus.prefetchable_range: The range of prefetchable MMIO for all devices on # this bridge # # @devices: a list of @PciDeviceInfo for each device on this bridge # # Since: 0.14.0 ## { 'type': 'PciBridgeInfo', 'data': {'bus': { 'number': 'int', 'secondary': 'int', 'subordinate': 'int', 'io_range': 'PciMemoryRange', 'memory_range': 'PciMemoryRange', 'prefetchable_range': 'PciMemoryRange' }, '*devices': ['PciDeviceInfo']} } ## # @PciDeviceInfo: # # Information about a PCI device # # @bus: the bus number of the device # # @slot: the slot the device is located in # # @function: the function of the slot used by the device # # @class_info.desc: #optional a string description of the device's class # # @class_info.class: the class code of the device # # @id.device: the PCI device id # # @id.vendor: the PCI vendor id # # @irq: #optional if an IRQ is assigned to the device, the IRQ number # # @qdev_id: the device name of the PCI device # # @pci_bridge: if the device is a PCI bridge, the bridge information # # @regions: a list of the PCI I/O regions associated with the device # # Notes: the contents of @class_info.desc are not stable and should only be # treated as informational. # # Since: 0.14.0 ## { 'type': 'PciDeviceInfo', 'data': {'bus': 'int', 'slot': 'int', 'function': 'int', 'class_info': {'*desc': 'str', 'class': 'int'}, 'id': {'device': 'int', 'vendor': 'int'}, '*irq': 'int', 'qdev_id': 'str', '*pci_bridge': 'PciBridgeInfo', 'regions': ['PciMemoryRegion']} } ## # @PciInfo: # # Information about a PCI bus # # @bus: the bus index # # @devices: a list of devices on this bus # # Since: 0.14.0 ## { 'type': 'PciInfo', 'data': {'bus': 'int', 'devices': ['PciDeviceInfo']} } ## # @query-pci: # # Return information about the PCI bus topology of the guest. # # Returns: a list of @PciInfo for each PCI bus # # Since: 0.14.0 ## { 'command': 'query-pci', 'returns': ['PciInfo'] } ## # @BlockJobInfo: # # Information about a long-running block device operation. # # @type: the job type ('stream' for image streaming) # # @device: the block device name # # @len: the maximum progress value # # @offset: the current progress value # # @speed: the rate limit, bytes per second # # Since: 1.1 ## { 'type': 'BlockJobInfo', 'data': {'type': 'str', 'device': 'str', 'len': 'int', 'offset': 'int', 'speed': 'int'} } ## # @query-block-jobs: # # Return information about long-running block device operations. # # Returns: a list of @BlockJobInfo for each active block job # # Since: 1.1 ## { 'command': 'query-block-jobs', 'returns': ['BlockJobInfo'] } ## # @quit: # # This command will cause the QEMU process to exit gracefully. While every # attempt is made to send the QMP response before terminating, this is not # guaranteed. When using this interface, a premature EOF would not be # unexpected. # # Since: 0.14.0 ## { 'command': 'quit' } ## # @stop: # # Stop all guest VCPU execution. # # Since: 0.14.0 # # Notes: This function will succeed even if the guest is already in the stopped # state ## { 'command': 'stop' } ## # @system_reset: # # Performs a hard reset of a guest. # # Since: 0.14.0 ## { 'command': 'system_reset' } ## # @system_powerdown: # # Requests that a guest perform a powerdown operation. # # Since: 0.14.0 # # Notes: A guest may or may not respond to this command. This command # returning does not indicate that a guest has accepted the request or # that it has shut down. Many guests will respond to this command by # prompting the user in some way. ## { 'command': 'system_powerdown' } ## # @cpu: # # This command is a nop that is only provided for the purposes of compatibility. # # Since: 0.14.0 # # Notes: Do not use this command. ## { 'command': 'cpu', 'data': {'index': 'int'} } ## # @memsave: # # Save a portion of guest memory to a file. # # @val: the virtual address of the guest to start from # # @size: the size of memory region to save # # @filename: the file to save the memory to as binary data # # @cpu-index: #optional the index of the virtual CPU to use for translating the # virtual address (defaults to CPU 0) # # Returns: Nothing on success # If @cpu is not a valid VCPU, InvalidParameterValue # If @filename cannot be opened, OpenFileFailed # If an I/O error occurs while writing the file, IOError # # Since: 0.14.0 # # Notes: Errors were not reliably returned until 1.1 ## { 'command': 'memsave', 'data': {'val': 'int', 'size': 'int', 'filename': 'str', '*cpu-index': 'int'} } ## # @pmemsave: # # Save a portion of guest physical memory to a file. # # @val: the physical address of the guest to start from # # @size: the size of memory region to save # # @filename: the file to save the memory to as binary data # # Returns: Nothing on success # If @filename cannot be opened, OpenFileFailed # If an I/O error occurs while writing the file, IOError # # Since: 0.14.0 # # Notes: Errors were not reliably returned until 1.1 ## { 'command': 'pmemsave', 'data': {'val': 'int', 'size': 'int', 'filename': 'str'} } ## # @cont: # # Resume guest VCPU execution. # # Since: 0.14.0 # # Returns: If successful, nothing # If the QEMU is waiting for an incoming migration, MigrationExpected # If QEMU was started with an encrypted block device and a key has # not yet been set, DeviceEncrypted. # # Notes: This command will succeed if the guest is currently running. ## { 'command': 'cont' } ## # @system_wakeup: # # Wakeup guest from suspend. Does nothing in case the guest isn't suspended. # # Since: 1.1 # # Returns: nothing. ## { 'command': 'system_wakeup' } ## # @inject-nmi: # # Injects an Non-Maskable Interrupt into all guest's VCPUs. # # Returns: If successful, nothing # If the Virtual Machine doesn't support NMI injection, Unsupported # # Since: 0.14.0 # # Notes: Only x86 Virtual Machines support this command. ## { 'command': 'inject-nmi' } ## # @set_link: # # Sets the link status of a virtual network adapter. # # @name: the device name of the virtual network adapter # # @up: true to set the link status to be up # # Returns: Nothing on success # If @name is not a valid network device, DeviceNotFound # # Since: 0.14.0 # # Notes: Not all network adapters support setting link status. This command # will succeed even if the network adapter does not support link status # notification. ## { 'command': 'set_link', 'data': {'name': 'str', 'up': 'bool'} } ## # @block_passwd: # # This command sets the password of a block device that has not been open # with a password and requires one. # # The two cases where this can happen are a block device is created through # QEMU's initial command line or a block device is changed through the legacy # @change interface. # # In the event that the block device is created through the initial command # line, the VM will start in the stopped state regardless of whether '-S' is # used. The intention is for a management tool to query the block devices to # determine which ones are encrypted, set the passwords with this command, and # then start the guest with the @cont command. # # @device: the name of the device to set the password on # # @password: the password to use for the device # # Returns: nothing on success # If @device is not a valid block device, DeviceNotFound # If @device is not encrypted, DeviceNotEncrypted # If @password is not valid for this device, InvalidPassword # # Notes: Not all block formats support encryption and some that do are not # able to validate that a password is correct. Disk corruption may # occur if an invalid password is specified. # # Since: 0.14.0 ## { 'command': 'block_passwd', 'data': {'device': 'str', 'password': 'str'} } ## # @balloon: # # Request the balloon driver to change its balloon size. # # @value: the target size of the balloon in bytes # # Returns: Nothing on success # If the balloon driver is enabled but not functional because the KVM # kernel module cannot support it, KvmMissingCap # If no balloon device is present, DeviceNotActive # # Notes: This command just issues a request to the guest. When it returns, # the balloon size may not have changed. A guest can change the balloon # size independent of this command. # # Since: 0.14.0 ## { 'command': 'balloon', 'data': {'value': 'int'} } ## # @block_resize # # Resize a block image while a guest is running. # # @device: the name of the device to get the image resized # # @size: new image size in bytes # # Returns: nothing on success # If @device is not a valid block device, DeviceNotFound # If @size is negative, InvalidParameterValue # If the block device has no medium inserted, DeviceHasNoMedium # If the block device does not support resize, Unsupported # If the block device is read-only, DeviceIsReadOnly # If a long-running operation is using the device, DeviceInUse # # Since: 0.14.0 ## { 'command': 'block_resize', 'data': { 'device': 'str', 'size': 'int' }} ## # @blockdev-snapshot-sync # # Generates a synchronous snapshot of a block device. # # @device: the name of the device to generate the snapshot from. # # @snapshot-file: the target of the new image. If the file exists, or if it # is a device, the snapshot will be created in the existing # file/device. If does not exist, a new file will be created. # # @format: #optional the format of the snapshot image, default is 'qcow2'. # # Returns: nothing on success # If @device is not a valid block device, DeviceNotFound # If @snapshot-file can't be opened, OpenFileFailed # If @format is invalid, InvalidBlockFormat # # Notes: One of the last steps taken by this command is to close the current # image being used by @device and open the @snapshot-file one. If that # fails, the command will try to reopen the original image file. If # that also fails OpenFileFailed will be returned and the guest may get # unexpected errors. # # Since 0.14.0 ## { 'command': 'blockdev-snapshot-sync', 'data': { 'device': 'str', 'snapshot-file': 'str', '*format': 'str' } } ## # @human-monitor-command: # # Execute a command on the human monitor and return the output. # # @command-line: the command to execute in the human monitor # # @cpu-index: #optional The CPU to use for commands that require an implicit CPU # # Returns: the output of the command as a string # # Since: 0.14.0 # # Notes: This command only exists as a stop-gap. It's use is highly # discouraged. The semantics of this command are not guaranteed. # # Known limitations: # # o This command is stateless, this means that commands that depend # on state information (such as getfd) might not work # # o Commands that prompt the user for data (eg. 'cont' when the block # device is encrypted) don't currently work ## { 'command': 'human-monitor-command', 'data': {'command-line': 'str', '*cpu-index': 'int'}, 'returns': 'str' } ## # @migrate_cancel # # Cancel the current executing migration process. # # Returns: nothing on success # # Notes: This command succeeds even if there is no migration process running. # # Since: 0.14.0 ## { 'command': 'migrate_cancel' } ## # @migrate_set_downtime # # Set maximum tolerated downtime for migration. # # @value: maximum downtime in seconds # # Returns: nothing on success # # Since: 0.14.0 ## { 'command': 'migrate_set_downtime', 'data': {'value': 'number'} } ## # @migrate_set_speed # # Set maximum speed for migration. # # @value: maximum speed in bytes. # # Returns: nothing on success # # Notes: A value lesser than zero will be automatically round up to zero. # # Since: 0.14.0 ## { 'command': 'migrate_set_speed', 'data': {'value': 'int'} } ## # @DevicePropertyInfo: # # @name: the name of the property # # @type: the type of the property. This will typically come in one of four # forms: # # 1) A primitive type such as 'u8', 'u16', 'bool', 'str', or 'double'. # These types are mapped to the appropriate JSON type. # # 2) A legacy type in the form 'legacy<subtype>' where subtype is the # legacy qdev typename. These types are always treated as strings. # # 3) A child type in the form 'child<subtype>' where subtype is a qdev # device type name. Child properties create the composition tree. # # 4) A link type in the form 'link<subtype>' where subtype is a qdev # device type name. Link properties form the device model graph. # # Since: 1.1 # # Notes: This type is experimental. Its syntax may change in future releases. ## { 'type': 'ObjectPropertyInfo', 'data': { 'name': 'str', 'type': 'str' } } ## # @qom-list: # # This command will list any properties of a object given a path in the object # model. # # @path: the path within the object model. See @qom-get for a description of # this parameter. # # Returns: a list of @ObjectPropertyInfo that describe the properties of the # object. # # Since: 1.1 # # Notes: This command is experimental. It's syntax may change in future # releases. ## { 'command': 'qom-list', 'data': { 'path': 'str' }, 'returns': [ 'ObjectPropertyInfo' ] } ## # @qom-get: # # This command will get a property from a object model path and return the # value. # # @path: The path within the object model. There are two forms of supported # paths--absolute and partial paths. # # Absolute paths are derived from the root object and can follow child<> # or link<> properties. Since they can follow link<> properties, they # can be arbitrarily long. Absolute paths look like absolute filenames # and are prefixed with a leading slash. # # Partial paths look like relative filenames. They do not begin # with a prefix. The matching rules for partial paths are subtle but # designed to make specifying objects easy. At each level of the # composition tree, the partial path is matched as an absolute path. # The first match is not returned. At least two matches are searched # for. A successful result is only returned if only one match is # found. If more than one match is found, a flag is return to # indicate that the match was ambiguous. # # @property: The property name to read # # Returns: The property value. The type depends on the property type. legacy<> # properties are returned as #str. child<> and link<> properties are # returns as #str pathnames. All integer property types (u8, u16, etc) # are returned as #int. # # Since: 1.1 # # Notes: This command is experimental and may change syntax in future releases. ## { 'command': 'qom-get', 'data': { 'path': 'str', 'property': 'str' }, 'returns': 'visitor', 'gen': 'no' } ## # @qom-set: # # This command will set a property from a object model path. # # @path: see @qom-get for a description of this parameter # # @property: the property name to set # # @value: a value who's type is appropriate for the property type. See @qom-get # for a description of type mapping. # # Since: 1.1 # # Notes: This command is experimental and may change syntax in future releases. ## { 'command': 'qom-set', 'data': { 'path': 'str', 'property': 'str', 'value': 'visitor' }, 'gen': 'no' } ## # @set_password: # # Sets the password of a remote display session. # # @protocol: `vnc' to modify the VNC server password # `spice' to modify the Spice server password # # @password: the new password # # @connected: #optional how to handle existing clients when changing the # password. If nothing is specified, defaults to `keep' # `fail' to fail the command if clients are connected # `disconnect' to disconnect existing clients # `keep' to maintain existing clients # # Returns: Nothing on success # If Spice is not enabled, DeviceNotFound # If @protocol does not support connected, InvalidParameter # If @protocol is invalid, InvalidParameter # If any other error occurs, SetPasswdFailed # # Notes: If VNC is not enabled, SetPasswdFailed is returned. # # Since: 0.14.0 ## { 'command': 'set_password', 'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} } ## # @expire_password: # # Expire the password of a remote display server. # # @protocol: the name of the remote display protocol `vnc' or `spice' # # @time: when to expire the password. # `now' to expire the password immediately # `never' to cancel password expiration # `+INT' where INT is the number of seconds from now (integer) # `INT' where INT is the absolute time in seconds # # Returns: Nothing on success # If @protocol is `spice' and Spice is not active, DeviceNotFound # If an error occurs setting password expiration, SetPasswdFailed # If @protocol is not `spice' or 'vnc', InvalidParameter # # Since: 0.14.0 # # Notes: Time is relative to the server and currently there is no way to # coordinate server time with client time. It is not recommended to # use the absolute time version of the @time parameter unless you're # sure you are on the same machine as the QEMU instance. ## { 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} } ## # @eject: # # Ejects a device from a removable drive. # # @device: The name of the device # # @force: @optional If true, eject regardless of whether the drive is locked. # If not specified, the default value is false. # # Returns: Nothing on success # If @device is not a valid block device, DeviceNotFound # If @device is not removable and @force is false, DeviceNotRemovable # If @force is false and @device is locked, DeviceLocked # # Notes: Ejecting a device will no media results in success # # Since: 0.14.0 ## { 'command': 'eject', 'data': {'device': 'str', '*force': 'bool'} } ## # @change-vnc-password: # # Change the VNC server password. # # @target: the new password to use with VNC authentication # # Since: 1.1 # # Notes: An empty password in this command will set the password to the empty # string. Existing clients are unaffected by executing this command. ## { 'command': 'change-vnc-password', 'data': {'password': 'str'} } ## # @change: # # This command is multiple commands multiplexed together. # # @device: This is normally the name of a block device but it may also be 'vnc'. # when it's 'vnc', then sub command depends on @target # # @target: If @device is a block device, then this is the new filename. # If @device is 'vnc', then if the value 'password' selects the vnc # change password command. Otherwise, this specifies a new server URI # address to listen to for VNC connections. # # @arg: If @device is a block device, then this is an optional format to open # the device with. # If @device is 'vnc' and @target is 'password', this is the new VNC # password to set. If this argument is an empty string, then no future # logins will be allowed. # # Returns: Nothing on success. # If @device is not a valid block device, DeviceNotFound # If @format is not a valid block format, InvalidBlockFormat # If the new block device is encrypted, DeviceEncrypted. Note that # if this error is returned, the device has been opened successfully # and an additional call to @block_passwd is required to set the # device's password. The behavior of reads and writes to the block # device between when these calls are executed is undefined. # # Notes: It is strongly recommended that this interface is not used especially # for changing block devices. # # Since: 0.14.0 ## { 'command': 'change', 'data': {'device': 'str', 'target': 'str', '*arg': 'str'} } ## # @block_set_io_throttle: # # Change I/O throttle limits for a block drive. # # @device: The name of the device # # @bps: total throughput limit in bytes per second # # @bps_rd: read throughput limit in bytes per second # # @bps_wr: write throughput limit in bytes per second # # @iops: total I/O operations per second # # @ops_rd: read I/O operations per second # # @iops_wr: write I/O operations per second # # Returns: Nothing on success # If @device is not a valid block device, DeviceNotFound # If the argument combination is invalid, InvalidParameterCombination # # Since: 1.1 ## { 'command': 'block_set_io_throttle', 'data': { 'device': 'str', 'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int', 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int' } } # @block_stream: # # Copy data from a backing file into a block device. # # The block streaming operation is performed in the background until the entire # backing file has been copied. This command returns immediately once streaming # has started. The status of ongoing block streaming operations can be checked # with query-block-jobs. The operation can be stopped before it has completed # using the block_job_cancel command. # # If a base file is specified then sectors are not copied from that base file and # its backing chain. When streaming completes the image file will have the base # file as its backing file. This can be used to stream a subset of the backing # file chain instead of flattening the entire image. # # On successful completion the image file is updated to drop the backing file # and the BLOCK_JOB_COMPLETED event is emitted. # # @device: the device name # # @base: #optional the common backing file name # # Returns: Nothing on success # If streaming is already active on this device, DeviceInUse # If @device does not exist, DeviceNotFound # If image streaming is not supported by this device, NotSupported # If @base does not exist, BaseNotFound # # Since: 1.1 ## { 'command': 'block_stream', 'data': { 'device': 'str', '*base': 'str' } } ## # @block_job_set_speed: # # Set maximum speed for a background block operation. # # This command can only be issued when there is an active block job. # # Throttling can be disabled by setting the speed to 0. # # @device: the device name # # @value: the maximum speed, in bytes per second # # Returns: Nothing on success # If the job type does not support throttling, NotSupported # If streaming is not active on this device, DeviceNotActive # # Since: 1.1 ## { 'command': 'block_job_set_speed', 'data': { 'device': 'str', 'value': 'int' } } ## # @block_job_cancel: # # Stop an active block streaming operation. # # This command returns immediately after marking the active block streaming # operation for cancellation. It is an error to call this command if no # operation is in progress. # # The operation will cancel as soon as possible and then emit the # BLOCK_JOB_CANCELLED event. Before that happens the job is still visible when # enumerated using query-block-jobs. # # The image file retains its backing file unless the streaming operation happens # to complete just as it is being cancelled. # # A new block streaming operation can be started at a later time to finish # copying all data from the backing file. # # @device: the device name # # Returns: Nothing on success # If streaming is not active on this device, DeviceNotActive # If cancellation already in progress, DeviceInUse # # Since: 1.1 ## { 'command': 'block_job_cancel', 'data': { 'device': 'str' } } ## # @ObjectTypeInfo: # # This structure describes a search result from @qom-list-types # # @name: the type name found in the search # # Since: 1.1 # # Notes: This command is experimental and may change syntax in future releases. ## { 'type': 'ObjectTypeInfo', 'data': { 'name': 'str' } } ## # @qom-list-types: # # This command will return a list of types given search parameters # # @implements: if specified, only return types that implement this type name # # @abstract: if true, include abstract types in the results # # Returns: a list of @ObjectTypeInfo or an empty list if no results are found # # Since: 1.1 # # Notes: This command is experimental and may change syntax in future releases. ## { 'command': 'qom-list-types', 'data': { '*implements': 'str', '*abstract': 'bool' }, 'returns': [ 'ObjectTypeInfo' ] }