/* common syscall defines for all architectures */ #define SOCKOP_socket 1 #define SOCKOP_bind 2 #define SOCKOP_connect 3 #define SOCKOP_listen 4 #define SOCKOP_accept 5 #define SOCKOP_getsockname 6 #define SOCKOP_getpeername 7 #define SOCKOP_socketpair 8 #define SOCKOP_send 9 #define SOCKOP_recv 10 #define SOCKOP_sendto 11 #define SOCKOP_recvfrom 12 #define SOCKOP_shutdown 13 #define SOCKOP_setsockopt 14 #define SOCKOP_getsockopt 15 #define SOCKOP_sendmsg 16 #define SOCKOP_recvmsg 17 struct target_timeval { target_long tv_sec; target_long tv_usec; }; struct target_iovec { target_long iov_base; /* Starting address */ target_long iov_len; /* Number of bytes */ }; struct target_msghdr { target_long msg_name; /* Socket name */ int msg_namelen; /* Length of name */ target_long msg_iov; /* Data blocks */ target_long msg_iovlen; /* Number of blocks */ target_long msg_control; /* Per protocol magic (eg BSD file descriptor passing) */ target_long msg_controllen; /* Length of cmsg list */ unsigned int msg_flags; }; struct target_rusage { struct target_timeval ru_utime; /* user time used */ struct target_timeval ru_stime; /* system time used */ target_long ru_maxrss; /* maximum resident set size */ target_long ru_ixrss; /* integral shared memory size */ target_long ru_idrss; /* integral unshared data size */ target_long ru_isrss; /* integral unshared stack size */ target_long ru_minflt; /* page reclaims */ target_long ru_majflt; /* page faults */ target_long ru_nswap; /* swaps */ target_long ru_inblock; /* block input operations */ target_long ru_oublock; /* block output operations */ target_long ru_msgsnd; /* messages sent */ target_long ru_msgrcv; /* messages received */ target_long ru_nsignals; /* signals received */ target_long ru_nvcsw; /* voluntary context switches */ target_long ru_nivcsw; /* involuntary " */ }; typedef struct { int val[2]; } kernel_fsid_t; struct kernel_statfs { int f_type; int f_bsize; int f_blocks; int f_bfree; int f_bavail; int f_files; int f_ffree; kernel_fsid_t f_fsid; int f_namelen; int f_spare[6]; }; struct target_dirent { target_long d_ino; target_long d_off; unsigned short d_reclen; char d_name[256]; /* We must not include limits.h! */ }; struct target_dirent64 { uint64_t d_ino; int64_t d_off; unsigned short d_reclen; unsigned char d_type; char d_name[256]; }; /* mostly generic signal stuff */ #define TARGET_SIG_DFL ((target_long)0) /* default signal handling */ #define TARGET_SIG_IGN ((target_long)1) /* ignore signal */ #define TARGET_SIG_ERR ((target_long)-1) /* error return from signal */ #ifdef TARGET_MIPS #define TARGET_NSIG 128 #else #define TARGET_NSIG 64 #endif #define TARGET_NSIG_BPW TARGET_LONG_BITS #define TARGET_NSIG_WORDS (TARGET_NSIG / TARGET_NSIG_BPW) typedef struct { target_ulong sig[TARGET_NSIG_WORDS]; } target_sigset_t; /* Networking ioctls */ #define TARGET_SIOCADDRT 0x890B /* add routing table entry */ #define TARGET_SIOCDELRT 0x890C /* delete routing table entry */ #define TARGET_SIOCGIFNAME 0x8910 /* get iface name */ #define TARGET_SIOCSIFLINK 0x8911 /* set iface channel */ #define TARGET_SIOCGIFCONF 0x8912 /* get iface list */ #define TARGET_SIOCGIFFLAGS 0x8913 /* get flags */ #define TARGET_SIOCSIFFLAGS 0x8914 /* set flags */ #define TARGET_SIOCGIFADDR 0x8915 /* get PA address */ #define TARGET_SIOCSIFADDR 0x8916 /* set PA address */ #define TARGET_SIOCGIFDSTADDR 0x8917 /* get remote PA address */ #define TARGET_SIOCSIFDSTADDR 0x8918 /* set remote PA address */ #define TARGET_SIOCGIFBRDADDR 0x8919 /* get broadcast PA address */ #define TARGET_SIOCSIFBRDADDR 0x891a /* set broadcast PA address */ #define TARGET_SIOCGIFNETMASK 0x891b /* get network PA mask */ #define TARGET_SIOCSIFNETMASK 0x891c /* set network PA mask */ #define TARGET_SIOCGIFMETRIC 0x891d /* get metric */ #define TARGET_SIOCSIFMETRIC 0x891e /* set metric */ #define TARGET_SIOCGIFMEM 0x891f /* get memory address (BSD) */ #define TARGET_SIOCSIFMEM 0x8920 /* set memory address (BSD) */ #define TARGET_SIOCGIFMTU 0x8921 /* get MTU size */ #define TARGET_SIOCSIFMTU 0x8922 /* set MTU size */ #define TARGET_SIOCSIFHWADDR 0x8924 /* set hardware address (NI) */ #define TARGET_SIOCGIFENCAP 0x8925 /* get/set slip encapsulation */ #define TARGET_SIOCSIFENCAP 0x8926 #define TARGET_SIOCGIFHWADDR 0x8927 /* Get hardware address */ #define TARGET_SIOCGIFSLAVE 0x8929 /* Driver slaving support */ #define TARGET_SIOCSIFSLAVE 0x8930 #define TARGET_SIOCADDMULTI 0x8931 /* Multicast address lists */ #define TARGET_SIOCDELMULTI 0x8932 /* Bridging control calls */ #define TARGET_SIOCGIFBR 0x8940 /* Bridging support */ #define TARGET_SIOCSIFBR 0x8941 /* Set bridging options */ #define TARGET_SIOCGIFTXQLEN 0x8942 /* Get the tx queue length */ #define TARGET_SIOCSIFTXQLEN 0x8943 /* Set the tx queue length */ /* ARP cache control calls. */ #define TARGET_OLD_SIOCDARP 0x8950 /* old delete ARP table entry */ #define TARGET_OLD_SIOCGARP 0x8951 /* old get ARP table entry */ #define TARGET_OLD_SIOCSARP 0x8952 /* old set ARP table entry */ #define TARGET_SIOCDARP 0x8953 /* delete ARP table entry */ #define TARGET_SIOCGARP 0x8954 /* get ARP table entry */ #define TARGET_SIOCSARP 0x8955 /* set ARP table entry */ /* RARP cache control calls. */ #define TARGET_SIOCDRARP 0x8960 /* delete RARP table entry */ #define TARGET_SIOCGRARP 0x8961 /* get RARP table entry */ #define TARGET_SIOCSRARP 0x8962 /* set RARP table entry */ /* Driver configuration calls */ #define TARGET_SIOCGIFMAP 0x8970 /* Get device parameters */ #define TARGET_SIOCSIFMAP 0x8971 /* Set device parameters */ /* DLCI configuration calls */ #define TARGET_SIOCADDDLCI 0x8980 /* Create new DLCI device */ #define TARGET_SIOCDELDLCI 0x8981 /* Delete DLCI device */ /* From */ #define TARGET_BLKROSET TARGET_IO(0x12,93) /* set device read-only (0 = read-write) */ #define TARGET_BLKROGET TARGET_IO(0x12,94) /* get read-only status (0 = read_write) */ #define TARGET_BLKRRPART TARGET_IO(0x12,95) /* re-read partition table */ #define TARGET_BLKGETSIZE TARGET_IO(0x12,96) /* return device size /512 (long *arg) */ #define TARGET_BLKFLSBUF TARGET_IO(0x12,97) /* flush buffer cache */ #define TARGET_BLKRASET TARGET_IO(0x12,98) /* Set read ahead for block device */ #define TARGET_BLKRAGET TARGET_IO(0x12,99) /* get current read ahead setting */ #define TARGET_BLKFRASET TARGET_IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */ #define TARGET_BLKFRAGET TARGET_IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */ #define TARGET_BLKSECTSET TARGET_IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */ #define TARGET_BLKSECTGET TARGET_IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */ #define TARGET_BLKSSZGET TARGET_IO(0x12,104)/* get block device sector size */ /* A jump here: 108-111 have been used for various private purposes. */ #define TARGET_BLKBSZGET TARGET_IOR(0x12,112,sizeof(int)) #define TARGET_BLKBSZSET TARGET_IOW(0x12,113,sizeof(int)) #define TARGET_BLKGETSIZE64 TARGET_IOR(0x12,114,sizeof(uint64_t)) /* return device size in bytes (u64 *arg) */ #define TARGET_FIBMAP TARGET_IO(0x00,1) /* bmap access */ #define TARGET_FIGETBSZ TARGET_IO(0x00,2) /* get the block size used for bmap */ /* cdrom commands */ #define TARGET_CDROMPAUSE 0x5301 /* Pause Audio Operation */ #define TARGET_CDROMRESUME 0x5302 /* Resume paused Audio Operation */ #define TARGET_CDROMPLAYMSF 0x5303 /* Play Audio MSF (struct cdrom_msf) */ #define TARGET_CDROMPLAYTRKIND 0x5304 /* Play Audio Track/index (struct cdrom_ti) */ #define TARGET_CDROMREADTOCHDR 0x5305 /* Read TOC header (struct cdrom_tochdr) */ #define TARGET_CDROMREADTOCENTRY 0x5306 /* Read TOC entry (struct cdrom_tocentry) */ #define TARGET_CDROMSTOP 0x5307 /* Stop the cdrom drive */ #define TARGET_CDROMSTART 0x5308 /* Start the cdrom drive */ #define TARGET_CDROMEJECT 0x5309 /* Ejects the cdrom media */ #define TARGET_CDROMVOLCTRL 0x530a /* Control output volume (struct cdrom_volctrl) */ #define TARGET_CDROMSUBCHNL 0x530b /* Read subchannel data (struct cdrom_subchnl) */ #define TARGET_CDROMREADMODE2 0x530c /* Read TARGET_CDROM mode 2 data (2336 Bytes) (struct cdrom_read) */ #define TARGET_CDROMREADMODE1 0x530d /* Read TARGET_CDROM mode 1 data (2048 Bytes) (struct cdrom_read) */ #define TARGET_CDROMREADAUDIO 0x530e /* (struct cdrom_read_audio) */ #define TARGET_CDROMEJECT_SW 0x530f /* enable(1)/disable(0) auto-ejecting */ #define TARGET_CDROMMULTISESSION 0x5310 /* Obtain the start-of-last-session address of multi session disks (struct cdrom_multisession) */ #define TARGET_CDROM_GET_MCN 0x5311 /* Obtain the "Universal Product Code" if available (struct cdrom_mcn) */ #define TARGET_CDROM_GET_UPC TARGET_CDROM_GET_MCN /* This one is depricated, but here anyway for compatability */ #define TARGET_CDROMRESET 0x5312 /* hard-reset the drive */ #define TARGET_CDROMVOLREAD 0x5313 /* Get the drive's volume setting (struct cdrom_volctrl) */ #define TARGET_CDROMREADRAW 0x5314 /* read data in raw mode (2352 Bytes) (struct cdrom_read) */ /* * These ioctls are used only used in aztcd.c and optcd.c */ #define TARGET_CDROMREADCOOKED 0x5315 /* read data in cooked mode */ #define TARGET_CDROMSEEK 0x5316 /* seek msf address */ /* * This ioctl is only used by the scsi-cd driver. It is for playing audio in logical block addressing mode. */ #define TARGET_CDROMPLAYBLK 0x5317 /* (struct cdrom_blk) */ /* * These ioctls are only used in optcd.c */ #define TARGET_CDROMREADALL 0x5318 /* read all 2646 bytes */ /* * These ioctls are (now) only in ide-cd.c for controlling * drive spindown time. They should be implemented in the * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10, * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE... * -Erik */ #define TARGET_CDROMGETSPINDOWN 0x531d #define TARGET_CDROMSETSPINDOWN 0x531e /* * These ioctls are implemented through the uniform CD-ROM driver * They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM * drivers are eventually ported to the uniform CD-ROM driver interface. */ #define TARGET_CDROMCLOSETRAY 0x5319 /* pendant of CDROMEJECT */ #define TARGET_CDROM_SET_OPTIONS 0x5320 /* Set behavior options */ #define TARGET_CDROM_CLEAR_OPTIONS 0x5321 /* Clear behavior options */ #define TARGET_CDROM_SELECT_SPEED 0x5322 /* Set the CD-ROM speed */ #define TARGET_CDROM_SELECT_DISC 0x5323 /* Select disc (for juke-boxes) */ #define TARGET_CDROM_MEDIA_CHANGED 0x5325 /* Check is media changed */ #define TARGET_CDROM_DRIVE_STATUS 0x5326 /* Get tray position, etc. */ #define TARGET_CDROM_DISC_STATUS 0x5327 /* Get disc type, etc. */ #define TARGET_CDROM_CHANGER_NSLOTS 0x5328 /* Get number of slots */ #define TARGET_CDROM_LOCKDOOR 0x5329 /* lock or unlock door */ #define TARGET_CDROM_DEBUG 0x5330 /* Turn debug messages on/off */ #define TARGET_CDROM_GET_CAPABILITY 0x5331 /* get capabilities */ /* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386. * Future CDROM ioctls should be kept below 0x537F */ /* This ioctl is only used by sbpcd at the moment */ #define TARGET_CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */ /* conflict with SCSI_IOCTL_GET_IDLUN */ /* DVD-ROM Specific ioctls */ #define TARGET_DVD_READ_STRUCT 0x5390 /* Read structure */ #define TARGET_DVD_WRITE_STRUCT 0x5391 /* Write structure */ #define TARGET_DVD_AUTH 0x5392 /* Authentication */ #define TARGET_CDROM_SEND_PACKET 0x5393 /* send a packet to the drive */ #define TARGET_CDROM_NEXT_WRITABLE 0x5394 /* get next writable block */ #define TARGET_CDROM_LAST_WRITTEN 0x5395 /* get last block written on disc */ /* HD commands */ /* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x030n/0x031n */ #define TARGET_HDIO_GETGEO 0x0301 /* get device geometry */ #define TARGET_HDIO_GET_UNMASKINTR 0x0302 /* get current unmask setting */ #define TARGET_HDIO_GET_MULTCOUNT 0x0304 /* get current IDE blockmode setting */ #define TARGET_HDIO_GET_IDENTITY 0x0307 /* get IDE identification info */ #define TARGET_HDIO_GET_KEEPSETTINGS 0x0308 /* get keep-settings-on-reset flag */ #define TARGET_HDIO_GET_32BIT 0x0309 /* get current io_32bit setting */ #define TARGET_HDIO_GET_NOWERR 0x030a /* get ignore-write-error flag */ #define TARGET_HDIO_GET_DMA 0x030b /* get use-dma flag */ #define TARGET_HDIO_DRIVE_CMD 0x031f /* execute a special drive command */ /* hd/ide ctl's that pass (arg) non-ptr values are numbered 0x032n/0x033n */ #define TARGET_HDIO_SET_MULTCOUNT 0x0321 /* change IDE blockmode */ #define TARGET_HDIO_SET_UNMASKINTR 0x0322 /* permit other irqs during I/O */ #define TARGET_HDIO_SET_KEEPSETTINGS 0x0323 /* keep ioctl settings on reset */ #define TARGET_HDIO_SET_32BIT 0x0324 /* change io_32bit flags */ #define TARGET_HDIO_SET_NOWERR 0x0325 /* change ignore-write-error flag */ #define TARGET_HDIO_SET_DMA 0x0326 /* change use-dma flag */ #define TARGET_HDIO_SET_PIO_MODE 0x0327 /* reconfig interface to new speed */