#if defined(TARGET_MIPS) /* MIPS special values for constants */ /* * For setsockopt(2) * * This defines are ABI conformant as far as Linux supports these ... */ #define TARGET_SOL_SOCKET 0xffff #define TARGET_SO_DEBUG 0x0001 /* Record debugging information. */ #define TARGET_SO_REUSEADDR 0x0004 /* Allow reuse of local addresses. */ #define TARGET_SO_KEEPALIVE 0x0008 /* Keep connections alive and send SIGPIPE when they die. */ #define TARGET_SO_DONTROUTE 0x0010 /* Don't do local routing. */ #define TARGET_SO_BROADCAST 0x0020 /* Allow transmission of broadcast messages. */ #define TARGET_SO_LINGER 0x0080 /* Block on close of a reliable * socket to transmit pending data. */ #define TARGET_SO_OOBINLINE 0x0100 /* Receive out-of-band data in-band. */ #if 0 /* To add: Allow local address and port reuse. */ #define TARGET_SO_REUSEPORT 0x0200 #endif #define TARGET_SO_TYPE 0x1008 /* Compatible name for SO_STYLE. */ #define TARGET_SO_STYLE SO_TYPE /* Synonym */ #define TARGET_SO_ERROR 0x1007 /* get error status and clear */ #define TARGET_SO_SNDBUF 0x1001 /* Send buffer size. */ #define TARGET_SO_RCVBUF 0x1002 /* Receive buffer. */ #define TARGET_SO_SNDLOWAT 0x1003 /* send low-water mark */ #define TARGET_SO_RCVLOWAT 0x1004 /* receive low-water mark */ #define TARGET_SO_SNDTIMEO 0x1005 /* send timeout */ #define TARGET_SO_RCVTIMEO 0x1006 /* receive timeout */ #define TARGET_SO_ACCEPTCONN 0x1009 /* linux-specific, might as well be the same as on i386 */ #define TARGET_SO_NO_CHECK 11 #define TARGET_SO_PRIORITY 12 #define TARGET_SO_BSDCOMPAT 14 #define TARGET_SO_PASSCRED 17 #define TARGET_SO_PEERCRED 18 /* Security levels - as per NRL IPv6 - don't actually do anything */ #define TARGET_SO_SECURITY_AUTHENTICATION 22 #define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT 23 #define TARGET_SO_SECURITY_ENCRYPTION_NETWORK 24 #define TARGET_SO_BINDTODEVICE 25 /* Socket filtering */ #define TARGET_SO_ATTACH_FILTER 26 #define TARGET_SO_DETACH_FILTER 27 #define TARGET_SO_PEERNAME 28 #define TARGET_SO_TIMESTAMP 29 #define SCM_TIMESTAMP SO_TIMESTAMP #define TARGET_SO_PEERSEC 30 #define TARGET_SO_SNDBUFFORCE 31 #define TARGET_SO_RCVBUFFORCE 33 #define TARGET_SO_PASSSEC 34 /** sock_type - Socket types * * Please notice that for binary compat reasons MIPS has to * override the enum sock_type in include/linux/net.h, so * we define ARCH_HAS_SOCKET_TYPES here. * * @SOCK_DGRAM - datagram (conn.less) socket * @SOCK_STREAM - stream (connection) socket * @SOCK_RAW - raw socket * @SOCK_RDM - reliably-delivered message * @SOCK_SEQPACKET - sequential packet socket * @SOCK_DCCP - Datagram Congestion Control Protocol socket * @SOCK_PACKET - linux specific way of getting packets at the dev level. * For writing rarp and other similar things on the user * level. * @SOCK_CLOEXEC - sets the close-on-exec (FD_CLOEXEC) flag. * @SOCK_NONBLOCK - sets the O_NONBLOCK file status flag. */ #define ARCH_HAS_SOCKET_TYPES 1 enum sock_type { TARGET_SOCK_DGRAM = 1, TARGET_SOCK_STREAM = 2, TARGET_SOCK_RAW = 3, TARGET_SOCK_RDM = 4, TARGET_SOCK_SEQPACKET = 5, TARGET_SOCK_DCCP = 6, TARGET_SOCK_PACKET = 10, TARGET_SOCK_CLOEXEC = 02000000, TARGET_SOCK_NONBLOCK = 0200, }; #define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1) #define TARGET_SOCK_TYPE_MASK 0xf /* Covers up to TARGET_SOCK_MAX-1. */ #elif defined(TARGET_ALPHA) /* For setsockopt(2) */ #define TARGET_SOL_SOCKET 0xffff #define TARGET_SO_DEBUG 0x0001 #define TARGET_SO_REUSEADDR 0x0004 #define TARGET_SO_KEEPALIVE 0x0008 #define TARGET_SO_DONTROUTE 0x0010 #define TARGET_SO_BROADCAST 0x0020 #define TARGET_SO_LINGER 0x0080 #define TARGET_SO_OOBINLINE 0x0100 /* To add :#define TARGET_SO_REUSEPORT 0x0200 */ #define TARGET_SO_TYPE 0x1008 #define TARGET_SO_ERROR 0x1007 #define TARGET_SO_SNDBUF 0x1001 #define TARGET_SO_RCVBUF 0x1002 #define TARGET_SO_SNDBUFFORCE 0x100a #define TARGET_SO_RCVBUFFORCE 0x100b #define TARGET_SO_RCVLOWAT 0x1010 #define TARGET_SO_SNDLOWAT 0x1011 #define TARGET_SO_RCVTIMEO 0x1012 #define TARGET_SO_SNDTIMEO 0x1013 #define TARGET_SO_ACCEPTCONN 0x1014 #define TARGET_SO_PROTOCOL 0x1028 #define TARGET_SO_DOMAIN 0x1029 /* linux-specific, might as well be the same as on i386 */ #define TARGET_SO_NO_CHECK 11 #define TARGET_SO_PRIORITY 12 #define TARGET_SO_BSDCOMPAT 14 #define TARGET_SO_PASSCRED 17 #define TARGET_SO_PEERCRED 18 #define TARGET_SO_BINDTODEVICE 25 /* Socket filtering */ #define TARGET_SO_ATTACH_FILTER 26 #define TARGET_SO_DETACH_FILTER 27 #define TARGET_SO_PEERNAME 28 #define TARGET_SO_TIMESTAMP 29 #define TARGET_SCM_TIMESTAMP TARGET_SO_TIMESTAMP #define TARGET_SO_PEERSEC 30 #define TARGET_SO_PASSSEC 34 #define TARGET_SO_TIMESTAMPNS 35 #define TARGET_SCM_TIMESTAMPNS TARGET_SO_TIMESTAMPNS /* Security levels - as per NRL IPv6 - don't actually do anything */ #define TARGET_SO_SECURITY_AUTHENTICATION 19 #define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT 20 #define TARGET_SO_SECURITY_ENCRYPTION_NETWORK 21 #define TARGET_SO_MARK 36 #define TARGET_SO_TIMESTAMPING 37 #define TARGET_SCM_TIMESTAMPING TARGET_SO_TIMESTAMPING #define TARGET_SO_RXQ_OVFL 40 #define TARGET_SO_WIFI_STATUS 41 #define TARGET_SCM_WIFI_STATUS TARGET_SO_WIFI_STATUS #define TARGET_SO_PEEK_OFF 42 /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define TARGET_SO_NOFCS 43 /** sock_type - Socket types * * Please notice that for binary compat reasons ALPHA has to * override the enum sock_type in include/linux/net.h, so * we define ARCH_HAS_SOCKET_TYPES here. * * @SOCK_DGRAM - datagram (conn.less) socket * @SOCK_STREAM - stream (connection) socket * @SOCK_RAW - raw socket * @SOCK_RDM - reliably-delivered message * @SOCK_SEQPACKET - sequential packet socket * @SOCK_DCCP - Datagram Congestion Control Protocol socket * @SOCK_PACKET - linux specific way of getting packets at the dev level. * For writing rarp and other similar things on the user * level. * @SOCK_CLOEXEC - sets the close-on-exec (FD_CLOEXEC) flag. * @SOCK_NONBLOCK - sets the O_NONBLOCK file status flag. */ #define ARCH_HAS_SOCKET_TYPES 1 enum sock_type { TARGET_SOCK_STREAM = 1, TARGET_SOCK_DGRAM = 2, TARGET_SOCK_RAW = 3, TARGET_SOCK_RDM = 4, TARGET_SOCK_SEQPACKET = 5, TARGET_SOCK_DCCP = 6, TARGET_SOCK_PACKET = 10, TARGET_SOCK_CLOEXEC = 010000000, TARGET_SOCK_NONBLOCK = 010000000000, }; #define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1) #define TARGET_SOCK_TYPE_MASK 0xf /* Covers up to TARGET_SOCK_MAX-1. */ #elif defined(TARGET_HPPA) #include <hppa/sockbits.h> #else #if defined(TARGET_SPARC) /** sock_type - Socket types * * Please notice that for binary compat reasons SPARC has to * override the enum sock_type in include/linux/net.h, so * we define ARCH_HAS_SOCKET_TYPES here. * * @SOCK_DGRAM - datagram (conn.less) socket * @SOCK_STREAM - stream (connection) socket * @SOCK_RAW - raw socket * @SOCK_RDM - reliably-delivered message * @SOCK_SEQPACKET - sequential packet socket * @SOCK_DCCP - Datagram Congestion Control Protocol socket * @SOCK_PACKET - linux specific way of getting packets at the dev level. * For writing rarp and other similar things on the user * level. * @SOCK_CLOEXEC - sets the close-on-exec (FD_CLOEXEC) flag. * @SOCK_NONBLOCK - sets the O_NONBLOCK file status flag. */ #define ARCH_HAS_SOCKET_TYPES 1 enum sock_type { TARGET_SOCK_STREAM = 1, TARGET_SOCK_DGRAM = 2, TARGET_SOCK_RAW = 3, TARGET_SOCK_RDM = 4, TARGET_SOCK_SEQPACKET = 5, TARGET_SOCK_DCCP = 6, TARGET_SOCK_PACKET = 10, TARGET_SOCK_CLOEXEC = 020000000, TARGET_SOCK_NONBLOCK = 040000, }; #define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1) #define TARGET_SOCK_TYPE_MASK 0xf /* Covers up to TARGET_SOCK_MAX-1. */ #define TARGET_SO_PASSSEC 31 #else #define TARGET_SO_PASSSEC 34 #endif /* For setsockopt(2) */ #define TARGET_SOL_SOCKET 1 #define TARGET_SO_DEBUG 1 #define TARGET_SO_REUSEADDR 2 #define TARGET_SO_TYPE 3 #define TARGET_SO_ERROR 4 #define TARGET_SO_DONTROUTE 5 #define TARGET_SO_BROADCAST 6 #define TARGET_SO_SNDBUF 7 #define TARGET_SO_RCVBUF 8 #define TARGET_SO_SNDBUFFORCE 32 #define TARGET_SO_RCVBUFFORCE 33 #define TARGET_SO_KEEPALIVE 9 #define TARGET_SO_OOBINLINE 10 #define TARGET_SO_NO_CHECK 11 #define TARGET_SO_PRIORITY 12 #define TARGET_SO_LINGER 13 #define TARGET_SO_BSDCOMPAT 14 /* To add :#define TARGET_SO_REUSEPORT 15 */ #if defined(TARGET_PPC) #define TARGET_SO_RCVLOWAT 16 #define TARGET_SO_SNDLOWAT 17 #define TARGET_SO_RCVTIMEO 18 #define TARGET_SO_SNDTIMEO 19 #define TARGET_SO_PASSCRED 20 #define TARGET_SO_PEERCRED 21 #else #define TARGET_SO_PASSCRED 16 #define TARGET_SO_PEERCRED 17 #define TARGET_SO_RCVLOWAT 18 #define TARGET_SO_SNDLOWAT 19 #define TARGET_SO_RCVTIMEO 20 #define TARGET_SO_SNDTIMEO 21 #endif /* Security levels - as per NRL IPv6 - don't actually do anything */ #define TARGET_SO_SECURITY_AUTHENTICATION 22 #define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT 23 #define TARGET_SO_SECURITY_ENCRYPTION_NETWORK 24 #define TARGET_SO_BINDTODEVICE 25 /* Socket filtering */ #define TARGET_SO_ATTACH_FILTER 26 #define TARGET_SO_DETACH_FILTER 27 #define TARGET_SO_PEERNAME 28 #define TARGET_SO_TIMESTAMP 29 #define TARGET_SCM_TIMESTAMP TARGET_SO_TIMESTAMP #define TARGET_SO_ACCEPTCONN 30 #define TARGET_SO_PEERSEC 31 #endif #ifndef ARCH_HAS_SOCKET_TYPES /** sock_type - Socket types - default values * * * @SOCK_STREAM - stream (connection) socket * @SOCK_DGRAM - datagram (conn.less) socket * @SOCK_RAW - raw socket * @SOCK_RDM - reliably-delivered message * @SOCK_SEQPACKET - sequential packet socket * @SOCK_DCCP - Datagram Congestion Control Protocol socket * @SOCK_PACKET - linux specific way of getting packets at the dev level. * For writing rarp and other similar things on the user * level. * @SOCK_CLOEXEC - sets the close-on-exec (FD_CLOEXEC) flag. * @SOCK_NONBLOCK - sets the O_NONBLOCK file status flag. */ enum sock_type { TARGET_SOCK_STREAM = 1, TARGET_SOCK_DGRAM = 2, TARGET_SOCK_RAW = 3, TARGET_SOCK_RDM = 4, TARGET_SOCK_SEQPACKET = 5, TARGET_SOCK_DCCP = 6, TARGET_SOCK_PACKET = 10, TARGET_SOCK_CLOEXEC = 02000000, TARGET_SOCK_NONBLOCK = 04000, }; #define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1) #define TARGET_SOCK_TYPE_MASK 0xf /* Covers up to TARGET_SOCK_MAX-1. */ #endif