/* * USB UHCI controller emulation * * Copyright (c) 2005 Fabrice Bellard * * Copyright (c) 2008 Max Krasnyansky * Magor rewrite of the UHCI data structures parser and frame processor * Support for fully async operation and multiple outstanding transactions * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include "qemu/osdep.h" #include "hw/hw.h" #include "hw/usb.h" #include "hw/usb/uhci-regs.h" #include "hw/pci/pci.h" #include "qapi/error.h" #include "qemu/timer.h" #include "qemu/iov.h" #include "sysemu/dma.h" #include "trace.h" #include "qemu/main-loop.h" #define FRAME_TIMER_FREQ 1000 #define FRAME_MAX_LOOPS 256 /* Must be large enough to handle 10 frame delay for initial isoc requests */ #define QH_VALID 32 #define MAX_FRAMES_PER_TICK (QH_VALID / 2) #define NB_PORTS 2 enum { TD_RESULT_STOP_FRAME = 10, TD_RESULT_COMPLETE, TD_RESULT_NEXT_QH, TD_RESULT_ASYNC_START, TD_RESULT_ASYNC_CONT, }; typedef struct UHCIState UHCIState; typedef struct UHCIAsync UHCIAsync; typedef struct UHCIQueue UHCIQueue; typedef struct UHCIInfo UHCIInfo; typedef struct UHCIPCIDeviceClass UHCIPCIDeviceClass; struct UHCIInfo { const char *name; uint16_t vendor_id; uint16_t device_id; uint8_t revision; uint8_t irq_pin; void (*realize)(PCIDevice *dev, Error **errp); bool unplug; }; struct UHCIPCIDeviceClass { PCIDeviceClass parent_class; UHCIInfo info; }; /* * Pending async transaction. * 'packet' must be the first field because completion * handler does "(UHCIAsync *) pkt" cast. */ struct UHCIAsync { USBPacket packet; uint8_t static_buf[64]; /* 64 bytes is enough, except for isoc packets */ uint8_t *buf; UHCIQueue *queue; QTAILQ_ENTRY(UHCIAsync) next; uint32_t td_addr; uint8_t done; }; struct UHCIQueue { uint32_t qh_addr; uint32_t token; UHCIState *uhci; USBEndpoint *ep; QTAILQ_ENTRY(UHCIQueue) next; QTAILQ_HEAD(asyncs_head, UHCIAsync) asyncs; int8_t valid; }; typedef struct UHCIPort { USBPort port; uint16_t ctrl; } UHCIPort; struct UHCIState { PCIDevice dev; MemoryRegion io_bar; USBBus bus; /* Note unused when we're a companion controller */ uint16_t cmd; /* cmd register */ uint16_t status; uint16_t intr; /* interrupt enable register */ uint16_t frnum; /* frame number */ uint32_t fl_base_addr; /* frame list base address */ uint8_t sof_timing; uint8_t status2; /* bit 0 and 1 are used to generate UHCI_STS_USBINT */ int64_t expire_time; QEMUTimer *frame_timer; QEMUBH *bh; uint32_t frame_bytes; uint32_t frame_bandwidth; bool completions_only; UHCIPort ports[NB_PORTS]; /* Interrupts that should be raised at the end of the current frame. */ uint32_t pending_int_mask; /* Active packets */ QTAILQ_HEAD(, UHCIQueue) queues; uint8_t num_ports_vmstate; /* Properties */ char *masterbus; uint32_t firstport; uint32_t maxframes; }; typedef struct UHCI_TD { uint32_t link; uint32_t ctrl; /* see TD_CTRL_xxx */ uint32_t token; uint32_t buffer; } UHCI_TD; typedef struct UHCI_QH { uint32_t link; uint32_t el_link; } UHCI_QH; static void uhci_async_cancel(UHCIAsync *async); static void uhci_queue_fill(UHCIQueue *q, UHCI_TD *td); static void uhci_resume(void *opaque); #define TYPE_UHCI "pci-uhci-usb" #define UHCI(obj) OBJECT_CHECK(UHCIState, (obj), TYPE_UHCI) static inline int32_t uhci_queue_token(UHCI_TD *td) { if ((td->token & (0xf << 15)) == 0) { /* ctrl ep, cover ep and dev, not pid! */ return td->token & 0x7ff00; } else { /* covers ep, dev, pid -> identifies the endpoint */ return td->token & 0x7ffff; } } static UHCIQueue *uhci_queue_new(UHCIState *s, uint32_t qh_addr, UHCI_TD *td, USBEndpoint *ep) { UHCIQueue *queue; queue = g_new0(UHCIQueue, 1); queue->uhci = s; queue->qh_addr = qh_addr; queue->token = uhci_queue_token(td); queue->ep = ep; QTAILQ_INIT(&queue->asyncs); QTAILQ_INSERT_HEAD(&s->queues, queue, next); queue->valid = QH_VALID; trace_usb_uhci_queue_add(queue->token); return queue; } static void uhci_queue_free(UHCIQueue *queue, const char *reason) { UHCIState *s = queue->uhci; UHCIAsync *async; while (!QTAILQ_EMPTY(&queue->asyncs)) { async = QTAILQ_FIRST(&queue->asyncs); uhci_async_cancel(async); } usb_device_ep_stopped(queue->ep->dev, queue->ep); trace_usb_uhci_queue_del(queue->token, reason); QTAILQ_REMOVE(&s->queues, queue, next); g_free(queue); } static UHCIQueue *uhci_queue_find(UHCIState *s, UHCI_TD *td) { uint32_t token = uhci_queue_token(td); UHCIQueue *queue; QTAILQ_FOREACH(queue, &s->queues, next) { if (queue->token == token) { return queue; } } return NULL; } static bool uhci_queue_verify(UHCIQueue *queue, uint32_t qh_addr, UHCI_TD *td, uint32_t td_addr, bool queuing) { UHCIAsync *first = QTAILQ_FIRST(&queue->asyncs); uint32_t queue_token_addr = (queue->token >> 8) & 0x7f; return queue->qh_addr == qh_addr && queue->token == uhci_queue_token(td) && queue_token_addr == queue->ep->dev->addr && (queuing || !(td->ctrl & TD_CTRL_ACTIVE) || first == NULL || first->td_addr == td_addr); } static UHCIAsync *uhci_async_alloc(UHCIQueue *queue, uint32_t td_addr) { UHCIAsync *async = g_new0(UHCIAsync, 1); async->queue = queue; async->td_addr = td_addr; usb_packet_init(&async->packet); trace_usb_uhci_packet_add(async->queue->token, async->td_addr); return async; } static void uhci_async_free(UHCIAsync *async) { trace_usb_uhci_packet_del(async->queue->token, async->td_addr); usb_packet_cleanup(&async->packet); if (async->buf != async->static_buf) { g_free(async->buf); } g_free(async); } static void uhci_async_link(UHCIAsync *async) { UHCIQueue *queue = async->queue; QTAILQ_INSERT_TAIL(&queue->asyncs, async, next); trace_usb_uhci_packet_link_async(async->queue->token, async->td_addr); } static void uhci_async_unlink(UHCIAsync *async) { UHCIQueue *queue = async->queue; QTAILQ_REMOVE(&queue->asyncs, async, next); trace_usb_uhci_packet_unlink_async(async->queue->token, async->td_addr); } static void uhci_async_cancel(UHCIAsync *async) { uhci_async_unlink(async); trace_usb_uhci_packet_cancel(async->queue->token, async->td_addr, async->done); if (!async->done) usb_cancel_packet(&async->packet); uhci_async_free(async); } /* * Mark all outstanding async packets as invalid. * This is used for canceling them when TDs are removed by the HCD. */ static void uhci_async_validate_begin(UHCIState *s) { UHCIQueue *queue; QTAILQ_FOREACH(queue, &s->queues, next) { queue->valid--; } } /* * Cancel async packets that are no longer valid */ static void uhci_async_validate_end(UHCIState *s) { UHCIQueue *queue, *n; QTAILQ_FOREACH_SAFE(queue, &s->queues, next, n) { if (!queue->valid) { uhci_queue_free(queue, "validate-end"); } } } static void uhci_async_cancel_device(UHCIState *s, USBDevice *dev) { UHCIQueue *queue, *n; QTAILQ_FOREACH_SAFE(queue, &s->queues, next, n) { if (queue->ep->dev == dev) { uhci_queue_free(queue, "cancel-device"); } } } static void uhci_async_cancel_all(UHCIState *s) { UHCIQueue *queue, *nq; QTAILQ_FOREACH_SAFE(queue, &s->queues, next, nq) { uhci_queue_free(queue, "cancel-all"); } } static UHCIAsync *uhci_async_find_td(UHCIState *s, uint32_t td_addr) { UHCIQueue *queue; UHCIAsync *async; QTAILQ_FOREACH(queue, &s->queues, next) { QTAILQ_FOREACH(async, &queue->asyncs, next) { if (async->td_addr == td_addr) { return async; } } } return NULL; } static void uhci_update_irq(UHCIState *s) { int level; if (((s->status2 & 1) && (s->intr & (1 << 2))) || ((s->status2 & 2) && (s->intr & (1 << 3))) || ((s->status & UHCI_STS_USBERR) && (s->intr & (1 << 0))) || ((s->status & UHCI_STS_RD) && (s->intr & (1 << 1))) || (s->status & UHCI_STS_HSERR) || (s->status & UHCI_STS_HCPERR)) { level = 1; } else { level = 0; } pci_set_irq(&s->dev, level); } static void uhci_reset(DeviceState *dev) { PCIDevice *d = PCI_DEVICE(dev); UHCIState *s = UHCI(d); uint8_t *pci_conf; int i; UHCIPort *port; trace_usb_uhci_reset(); pci_conf = s->dev.config; pci_conf[0x6a] = 0x01; /* usb clock */ pci_conf[0x6b] = 0x00; s->cmd = 0; s->status = UHCI_STS_HCHALTED; s->status2 = 0; s->intr = 0; s->fl_base_addr = 0; s->sof_timing = 64; for(i = 0; i < NB_PORTS; i++) { port = &s->ports[i]; port->ctrl = 0x0080; if (port->port.dev && port->port.dev->attached) { usb_port_reset(&port->port); } } uhci_async_cancel_all(s); qemu_bh_cancel(s->bh); uhci_update_irq(s); } static const VMStateDescription vmstate_uhci_port = { .name = "uhci port", .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { VMSTATE_UINT16(ctrl, UHCIPort), VMSTATE_END_OF_LIST() } }; static int uhci_post_load(void *opaque, int version_id) { UHCIState *s = opaque; if (version_id < 2) { s->expire_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (NANOSECONDS_PER_SECOND / FRAME_TIMER_FREQ); } return 0; } static const VMStateDescription vmstate_uhci = { .name = "uhci", .version_id = 3, .minimum_version_id = 1, .post_load = uhci_post_load, .fields = (VMStateField[]) { VMSTATE_PCI_DEVICE(dev, UHCIState), VMSTATE_UINT8_EQUAL(num_ports_vmstate, UHCIState), VMSTATE_STRUCT_ARRAY(ports, UHCIState, NB_PORTS, 1, vmstate_uhci_port, UHCIPort), VMSTATE_UINT16(cmd, UHCIState), VMSTATE_UINT16(status, UHCIState), VMSTATE_UINT16(intr, UHCIState), VMSTATE_UINT16(frnum, UHCIState), VMSTATE_UINT32(fl_base_addr, UHCIState), VMSTATE_UINT8(sof_timing, UHCIState), VMSTATE_UINT8(status2, UHCIState), VMSTATE_TIMER_PTR(frame_timer, UHCIState), VMSTATE_INT64_V(expire_time, UHCIState, 2), VMSTATE_UINT32_V(pending_int_mask, UHCIState, 3), VMSTATE_END_OF_LIST() } }; static void uhci_port_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { UHCIState *s = opaque; trace_usb_uhci_mmio_writew(addr, val); switch(addr) { case 0x00: if ((val & UHCI_CMD_RS) && !(s->cmd & UHCI_CMD_RS)) { /* start frame processing */ trace_usb_uhci_schedule_start(); s->expire_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (NANOSECONDS_PER_SECOND / FRAME_TIMER_FREQ); timer_mod(s->frame_timer, s->expire_time); s->status &= ~UHCI_STS_HCHALTED; } else if (!(val & UHCI_CMD_RS)) { s->status |= UHCI_STS_HCHALTED; } if (val & UHCI_CMD_GRESET) { UHCIPort *port; int i; /* send reset on the USB bus */ for(i = 0; i < NB_PORTS; i++) { port = &s->ports[i]; usb_device_reset(port->port.dev); } uhci_reset(DEVICE(s)); return; } if (val & UHCI_CMD_HCRESET) { uhci_reset(DEVICE(s)); return; } s->cmd = val; if (val & UHCI_CMD_EGSM) { if ((s->ports[0].ctrl & UHCI_PORT_RD) || (s->ports[1].ctrl & UHCI_PORT_RD)) { uhci_resume(s); } } break; case 0x02: s->status &= ~val; /* XXX: the chip spec is not coherent, so we add a hidden register to distinguish between IOC and SPD */ if (val & UHCI_STS_USBINT) s->status2 = 0; uhci_update_irq(s); break; case 0x04: s->intr = val; uhci_update_irq(s); break; case 0x06: if (s->status & UHCI_STS_HCHALTED) s->frnum = val & 0x7ff; break; case 0x08: s->fl_base_addr &= 0xffff0000; s->fl_base_addr |= val & ~0xfff; break; case 0x0a: s->fl_base_addr &= 0x0000ffff; s->fl_base_addr |= (val << 16); break; case 0x0c: s->sof_timing = val & 0xff; break; case 0x10 ... 0x1f: { UHCIPort *port; USBDevice *dev; int n; n = (addr >> 1) & 7; if (n >= NB_PORTS) return; port = &s->ports[n]; dev = port->port.dev; if (dev && dev->attached) { /* port reset */ if ( (val & UHCI_PORT_RESET) && !(port->ctrl & UHCI_PORT_RESET) ) { usb_device_reset(dev); } } port->ctrl &= UHCI_PORT_READ_ONLY; /* enabled may only be set if a device is connected */ if (!(port->ctrl & UHCI_PORT_CCS)) { val &= ~UHCI_PORT_EN; } port->ctrl |= (val & ~UHCI_PORT_READ_ONLY); /* some bits are reset when a '1' is written to them */ port->ctrl &= ~(val & UHCI_PORT_WRITE_CLEAR); } break; } } static uint64_t uhci_port_read(void *opaque, hwaddr addr, unsigned size) { UHCIState *s = opaque; uint32_t val; switch(addr) { case 0x00: val = s->cmd; break; case 0x02: val = s->status; break; case 0x04: val = s->intr; break; case 0x06: val = s->frnum; break; case 0x08: val = s->fl_base_addr & 0xffff; break; case 0x0a: val = (s->fl_base_addr >> 16) & 0xffff; break; case 0x0c: val = s->sof_timing; break; case 0x10 ... 0x1f: { UHCIPort *port; int n; n = (addr >> 1) & 7; if (n >= NB_PORTS) goto read_default; port = &s->ports[n]; val = port->ctrl; } break; default: read_default: val = 0xff7f; /* disabled port */ break; } trace_usb_uhci_mmio_readw(addr, val); return val; } /* signal resume if controller suspended */ static void uhci_resume (void *opaque) { UHCIState *s = (UHCIState *)opaque; if (!s) return; if (s->cmd & UHCI_CMD_EGSM) { s->cmd |= UHCI_CMD_FGR; s->status |= UHCI_STS_RD; uhci_update_irq(s); } } static void uhci_attach(USBPort *port1) { UHCIState *s = port1->opaque; UHCIPort *port = &s->ports[port1->index]; /* set connect status */ port->ctrl |= UHCI_PORT_CCS | UHCI_PORT_CSC; /* update speed */ if (port->port.dev->speed == USB_SPEED_LOW) { port->ctrl |= UHCI_PORT_LSDA; } else { port->ctrl &= ~UHCI_PORT_LSDA; } uhci_resume(s); } static void uhci_detach(USBPort *port1) { UHCIState *s = port1->opaque; UHCIPort *port = &s->ports[port1->index]; uhci_async_cancel_device(s, port1->dev); /* set connect status */ if (port->ctrl & UHCI_PORT_CCS) { port->ctrl &= ~UHCI_PORT_CCS; port->ctrl |= UHCI_PORT_CSC; } /* disable port */ if (port->ctrl & UHCI_PORT_EN) { port->ctrl &= ~UHCI_PORT_EN; port->ctrl |= UHCI_PORT_ENC; } uhci_resume(s); } static void uhci_child_detach(USBPort *port1, USBDevice *child) { UHCIState *s = port1->opaque; uhci_async_cancel_device(s, child); } static void uhci_wakeup(USBPort *port1) { UHCIState *s = port1->opaque; UHCIPort *port = &s->ports[port1->index]; if (port->ctrl & UHCI_PORT_SUSPEND && !(port->ctrl & UHCI_PORT_RD)) { port->ctrl |= UHCI_PORT_RD; uhci_resume(s); } } static USBDevice *uhci_find_device(UHCIState *s, uint8_t addr) { USBDevice *dev; int i; for (i = 0; i < NB_PORTS; i++) { UHCIPort *port = &s->ports[i]; if (!(port->ctrl & UHCI_PORT_EN)) { continue; } dev = usb_find_device(&port->port, addr); if (dev != NULL) { return dev; } } return NULL; } static void uhci_read_td(UHCIState *s, UHCI_TD *td, uint32_t link) { pci_dma_read(&s->dev, link & ~0xf, td, sizeof(*td)); le32_to_cpus(&td->link); le32_to_cpus(&td->ctrl); le32_to_cpus(&td->token); le32_to_cpus(&td->buffer); } static int uhci_handle_td_error(UHCIState *s, UHCI_TD *td, uint32_t td_addr, int status, uint32_t *int_mask) { uint32_t queue_token = uhci_queue_token(td); int ret; switch (status) { case USB_RET_NAK: td->ctrl |= TD_CTRL_NAK; return TD_RESULT_NEXT_QH; case USB_RET_STALL: td->ctrl |= TD_CTRL_STALL; trace_usb_uhci_packet_complete_stall(queue_token, td_addr); ret = TD_RESULT_NEXT_QH; break; case USB_RET_BABBLE: td->ctrl |= TD_CTRL_BABBLE | TD_CTRL_STALL; /* frame interrupted */ trace_usb_uhci_packet_complete_babble(queue_token, td_addr); ret = TD_RESULT_STOP_FRAME; break; case USB_RET_IOERROR: case USB_RET_NODEV: default: td->ctrl |= TD_CTRL_TIMEOUT; td->ctrl &= ~(3 << TD_CTRL_ERROR_SHIFT); trace_usb_uhci_packet_complete_error(queue_token, td_addr); ret = TD_RESULT_NEXT_QH; break; } td->ctrl &= ~TD_CTRL_ACTIVE; s->status |= UHCI_STS_USBERR; if (td->ctrl & TD_CTRL_IOC) { *int_mask |= 0x01; } uhci_update_irq(s); return ret; } static int uhci_complete_td(UHCIState *s, UHCI_TD *td, UHCIAsync *async, uint32_t *int_mask) { int len = 0, max_len; uint8_t pid; max_len = ((td->token >> 21) + 1) & 0x7ff; pid = td->token & 0xff; if (td->ctrl & TD_CTRL_IOS) td->ctrl &= ~TD_CTRL_ACTIVE; if (async->packet.status != USB_RET_SUCCESS) { return uhci_handle_td_error(s, td, async->td_addr, async->packet.status, int_mask); } len = async->packet.actual_length; td->ctrl = (td->ctrl & ~0x7ff) | ((len - 1) & 0x7ff); /* The NAK bit may have been set by a previous frame, so clear it here. The docs are somewhat unclear, but win2k relies on this behavior. */ td->ctrl &= ~(TD_CTRL_ACTIVE | TD_CTRL_NAK); if (td->ctrl & TD_CTRL_IOC) *int_mask |= 0x01; if (pid == USB_TOKEN_IN) { pci_dma_write(&s->dev, td->buffer, async->buf, len); if ((td->ctrl & TD_CTRL_SPD) && len < max_len) { *int_mask |= 0x02; /* short packet: do not update QH */ trace_usb_uhci_packet_complete_shortxfer(async->queue->token, async->td_addr); return TD_RESULT_NEXT_QH; } } /* success */ trace_usb_uhci_packet_complete_success(async->queue->token, async->td_addr); return TD_RESULT_COMPLETE; } static int uhci_handle_td(UHCIState *s, UHCIQueue *q, uint32_t qh_addr, UHCI_TD *td, uint32_t td_addr, uint32_t *int_mask) { int ret, max_len; bool spd; bool queuing = (q != NULL); uint8_t pid = td->token & 0xff; UHCIAsync *async; switch (pid) { case USB_TOKEN_OUT: case USB_TOKEN_SETUP: case USB_TOKEN_IN: break; default: /* invalid pid : frame interrupted */ s->status |= UHCI_STS_HCPERR; s->cmd &= ~UHCI_CMD_RS; uhci_update_irq(s); return TD_RESULT_STOP_FRAME; } async = uhci_async_find_td(s, td_addr); if (async) { if (uhci_queue_verify(async->queue, qh_addr, td, td_addr, queuing)) { assert(q == NULL || q == async->queue); q = async->queue; } else { uhci_queue_free(async->queue, "guest re-used pending td"); async = NULL; } } if (q == NULL) { q = uhci_queue_find(s, td); if (q && !uhci_queue_verify(q, qh_addr, td, td_addr, queuing)) { uhci_queue_free(q, "guest re-used qh"); q = NULL; } } if (q) { q->valid = QH_VALID; } /* Is active ? */ if (!(td->ctrl & TD_CTRL_ACTIVE)) { if (async) { /* Guest marked a pending td non-active, cancel the queue */ uhci_queue_free(async->queue, "pending td non-active"); } /* * ehci11d spec page 22: "Even if the Active bit in the TD is already * cleared when the TD is fetched ... an IOC interrupt is generated" */ if (td->ctrl & TD_CTRL_IOC) { *int_mask |= 0x01; } return TD_RESULT_NEXT_QH; } if (async) { if (queuing) { /* we are busy filling the queue, we are not prepared to consume completed packages then, just leave them in async state */ return TD_RESULT_ASYNC_CONT; } if (!async->done) { UHCI_TD last_td; UHCIAsync *last = QTAILQ_LAST(&async->queue->asyncs, asyncs_head); /* * While we are waiting for the current td to complete, the guest * may have added more tds to the queue. Note we re-read the td * rather then caching it, as we want to see guest made changes! */ uhci_read_td(s, &last_td, last->td_addr); uhci_queue_fill(async->queue, &last_td); return TD_RESULT_ASYNC_CONT; } uhci_async_unlink(async); goto done; } if (s->completions_only) { return TD_RESULT_ASYNC_CONT; } /* Allocate new packet */ if (q == NULL) { USBDevice *dev = uhci_find_device(s, (td->token >> 8) & 0x7f); USBEndpoint *ep = usb_ep_get(dev, pid, (td->token >> 15) & 0xf); if (ep == NULL) { return uhci_handle_td_error(s, td, td_addr, USB_RET_NODEV, int_mask); } q = uhci_queue_new(s, qh_addr, td, ep); } async = uhci_async_alloc(q, td_addr); max_len = ((td->token >> 21) + 1) & 0x7ff; spd = (pid == USB_TOKEN_IN && (td->ctrl & TD_CTRL_SPD) != 0); usb_packet_setup(&async->packet, pid, q->ep, 0, td_addr, spd, (td->ctrl & TD_CTRL_IOC) != 0); if (max_len <= sizeof(async->static_buf)) { async->buf = async->static_buf; } else { async->buf = g_malloc(max_len); } usb_packet_addbuf(&async->packet, async->buf, max_len); switch(pid) { case USB_TOKEN_OUT: case USB_TOKEN_SETUP: pci_dma_read(&s->dev, td->buffer, async->buf, max_len); usb_handle_packet(q->ep->dev, &async->packet); if (async->packet.status == USB_RET_SUCCESS) { async->packet.actual_length = max_len; } break; case USB_TOKEN_IN: usb_handle_packet(q->ep->dev, &async->packet); break; default: abort(); /* Never to execute */ } if (async->packet.status == USB_RET_ASYNC) { uhci_async_link(async); if (!queuing) { uhci_queue_fill(q, td); } return TD_RESULT_ASYNC_START; } done: ret = uhci_complete_td(s, td, async, int_mask); uhci_async_free(async); return ret; } static void uhci_async_complete(USBPort *port, USBPacket *packet) { UHCIAsync *async = container_of(packet, UHCIAsync, packet); UHCIState *s = async->queue->uhci; if (packet->status == USB_RET_REMOVE_FROM_QUEUE) { uhci_async_cancel(async); return; } async->done = 1; /* Force processing of this packet *now*, needed for migration */ s->completions_only = true; qemu_bh_schedule(s->bh); } static int is_valid(uint32_t link) { return (link & 1) == 0; } static int is_qh(uint32_t link) { return (link & 2) != 0; } static int depth_first(uint32_t link) { return (link & 4) != 0; } /* QH DB used for detecting QH loops */ #define UHCI_MAX_QUEUES 128 typedef struct { uint32_t addr[UHCI_MAX_QUEUES]; int count; } QhDb; static void qhdb_reset(QhDb *db) { db->count = 0; } /* Add QH to DB. Returns 1 if already present or DB is full. */ static int qhdb_insert(QhDb *db, uint32_t addr) { int i; for (i = 0; i < db->count; i++) if (db->addr[i] == addr) return 1; if (db->count >= UHCI_MAX_QUEUES) return 1; db->addr[db->count++] = addr; return 0; } static void uhci_queue_fill(UHCIQueue *q, UHCI_TD *td) { uint32_t int_mask = 0; uint32_t plink = td->link; UHCI_TD ptd; int ret; while (is_valid(plink)) { uhci_read_td(q->uhci, &ptd, plink); if (!(ptd.ctrl & TD_CTRL_ACTIVE)) { break; } if (uhci_queue_token(&ptd) != q->token) { break; } trace_usb_uhci_td_queue(plink & ~0xf, ptd.ctrl, ptd.token); ret = uhci_handle_td(q->uhci, q, q->qh_addr, &ptd, plink, &int_mask); if (ret == TD_RESULT_ASYNC_CONT) { break; } assert(ret == TD_RESULT_ASYNC_START); assert(int_mask == 0); plink = ptd.link; } usb_device_flush_ep_queue(q->ep->dev, q->ep); } static void uhci_process_frame(UHCIState *s) { uint32_t frame_addr, link, old_td_ctrl, val, int_mask; uint32_t curr_qh, td_count = 0; int cnt, ret; UHCI_TD td; UHCI_QH qh; QhDb qhdb; frame_addr = s->fl_base_addr + ((s->frnum & 0x3ff) << 2); pci_dma_read(&s->dev, frame_addr, &link, 4); le32_to_cpus(&link); int_mask = 0; curr_qh = 0; qhdb_reset(&qhdb); for (cnt = FRAME_MAX_LOOPS; is_valid(link) && cnt; cnt--) { if (!s->completions_only && s->frame_bytes >= s->frame_bandwidth) { /* We've reached the usb 1.1 bandwidth, which is 1280 bytes/frame, stop processing */ trace_usb_uhci_frame_stop_bandwidth(); break; } if (is_qh(link)) { /* QH */ trace_usb_uhci_qh_load(link & ~0xf); if (qhdb_insert(&qhdb, link)) { /* * We're going in circles. Which is not a bug because * HCD is allowed to do that as part of the BW management. * * Stop processing here if no transaction has been done * since we've been here last time. */ if (td_count == 0) { trace_usb_uhci_frame_loop_stop_idle(); break; } else { trace_usb_uhci_frame_loop_continue(); td_count = 0; qhdb_reset(&qhdb); qhdb_insert(&qhdb, link); } } pci_dma_read(&s->dev, link & ~0xf, &qh, sizeof(qh)); le32_to_cpus(&qh.link); le32_to_cpus(&qh.el_link); if (!is_valid(qh.el_link)) { /* QH w/o elements */ curr_qh = 0; link = qh.link; } else { /* QH with elements */ curr_qh = link; link = qh.el_link; } continue; } /* TD */ uhci_read_td(s, &td, link); trace_usb_uhci_td_load(curr_qh & ~0xf, link & ~0xf, td.ctrl, td.token); old_td_ctrl = td.ctrl; ret = uhci_handle_td(s, NULL, curr_qh, &td, link, &int_mask); if (old_td_ctrl != td.ctrl) { /* update the status bits of the TD */ val = cpu_to_le32(td.ctrl); pci_dma_write(&s->dev, (link & ~0xf) + 4, &val, sizeof(val)); } switch (ret) { case TD_RESULT_STOP_FRAME: /* interrupted frame */ goto out; case TD_RESULT_NEXT_QH: case TD_RESULT_ASYNC_CONT: trace_usb_uhci_td_nextqh(curr_qh & ~0xf, link & ~0xf); link = curr_qh ? qh.link : td.link; continue; case TD_RESULT_ASYNC_START: trace_usb_uhci_td_async(curr_qh & ~0xf, link & ~0xf); link = curr_qh ? qh.link : td.link; continue; case TD_RESULT_COMPLETE: trace_usb_uhci_td_complete(curr_qh & ~0xf, link & ~0xf); link = td.link; td_count++; s->frame_bytes += (td.ctrl & 0x7ff) + 1; if (curr_qh) { /* update QH element link */ qh.el_link = link; val = cpu_to_le32(qh.el_link); pci_dma_write(&s->dev, (curr_qh & ~0xf) + 4, &val, sizeof(val)); if (!depth_first(link)) { /* done with this QH */ curr_qh = 0; link = qh.link; } } break; default: assert(!"unknown return code"); } /* go to the next entry */ } out: s->pending_int_mask |= int_mask; } static void uhci_bh(void *opaque) { UHCIState *s = opaque; uhci_process_frame(s); } static void uhci_frame_timer(void *opaque) { UHCIState *s = opaque; uint64_t t_now, t_last_run; int i, frames; const uint64_t frame_t = NANOSECONDS_PER_SECOND / FRAME_TIMER_FREQ; s->completions_only = false; qemu_bh_cancel(s->bh); if (!(s->cmd & UHCI_CMD_RS)) { /* Full stop */ trace_usb_uhci_schedule_stop(); timer_del(s->frame_timer); uhci_async_cancel_all(s); /* set hchalted bit in status - UHCI11D 2.1.2 */ s->status |= UHCI_STS_HCHALTED; return; } /* We still store expire_time in our state, for migration */ t_last_run = s->expire_time - frame_t; t_now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); /* Process up to MAX_FRAMES_PER_TICK frames */ frames = (t_now - t_last_run) / frame_t; if (frames > s->maxframes) { int skipped = frames - s->maxframes; s->expire_time += skipped * frame_t; s->frnum = (s->frnum + skipped) & 0x7ff; frames -= skipped; } if (frames > MAX_FRAMES_PER_TICK) { frames = MAX_FRAMES_PER_TICK; } for (i = 0; i < frames; i++) { s->frame_bytes = 0; trace_usb_uhci_frame_start(s->frnum); uhci_async_validate_begin(s); uhci_process_frame(s); uhci_async_validate_end(s); /* The spec says frnum is the frame currently being processed, and * the guest must look at frnum - 1 on interrupt, so inc frnum now */ s->frnum = (s->frnum + 1) & 0x7ff; s->expire_time += frame_t; } /* Complete the previous frame(s) */ if (s->pending_int_mask) { s->status2 |= s->pending_int_mask; s->status |= UHCI_STS_USBINT; uhci_update_irq(s); } s->pending_int_mask = 0; timer_mod(s->frame_timer, t_now + frame_t); } static const MemoryRegionOps uhci_ioport_ops = { .read = uhci_port_read, .write = uhci_port_write, .valid.min_access_size = 1, .valid.max_access_size = 4, .impl.min_access_size = 2, .impl.max_access_size = 2, .endianness = DEVICE_LITTLE_ENDIAN, }; static USBPortOps uhci_port_ops = { .attach = uhci_attach, .detach = uhci_detach, .child_detach = uhci_child_detach, .wakeup = uhci_wakeup, .complete = uhci_async_complete, }; static USBBusOps uhci_bus_ops = { }; static void usb_uhci_common_realize(PCIDevice *dev, Error **errp) { Error *err = NULL; PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev); UHCIPCIDeviceClass *u = container_of(pc, UHCIPCIDeviceClass, parent_class); UHCIState *s = UHCI(dev); uint8_t *pci_conf = s->dev.config; int i; pci_conf[PCI_CLASS_PROG] = 0x00; /* TODO: reset value should be 0. */ pci_conf[USB_SBRN] = USB_RELEASE_1; // release number pci_config_set_interrupt_pin(pci_conf, u->info.irq_pin + 1); if (s->masterbus) { USBPort *ports[NB_PORTS]; for(i = 0; i < NB_PORTS; i++) { ports[i] = &s->ports[i].port; } usb_register_companion(s->masterbus, ports, NB_PORTS, s->firstport, s, &uhci_port_ops, USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL, &err); if (err) { error_propagate(errp, err); return; } } else { usb_bus_new(&s->bus, sizeof(s->bus), &uhci_bus_ops, DEVICE(dev)); for (i = 0; i < NB_PORTS; i++) { usb_register_port(&s->bus, &s->ports[i].port, s, i, &uhci_port_ops, USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL); } } s->bh = qemu_bh_new(uhci_bh, s); s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, uhci_frame_timer, s); s->num_ports_vmstate = NB_PORTS; QTAILQ_INIT(&s->queues); memory_region_init_io(&s->io_bar, OBJECT(s), &uhci_ioport_ops, s, "uhci", 0x20); /* Use region 4 for consistency with real hardware. BSD guests seem to rely on this. */ pci_register_bar(&s->dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &s->io_bar); } static void usb_uhci_vt82c686b_realize(PCIDevice *dev, Error **errp) { UHCIState *s = UHCI(dev); uint8_t *pci_conf = s->dev.config; /* USB misc control 1/2 */ pci_set_long(pci_conf + 0x40,0x00001000); /* PM capability */ pci_set_long(pci_conf + 0x80,0x00020001); /* USB legacy support */ pci_set_long(pci_conf + 0xc0,0x00002000); usb_uhci_common_realize(dev, errp); } static void usb_uhci_exit(PCIDevice *dev) { UHCIState *s = UHCI(dev); trace_usb_uhci_exit(); if (s->frame_timer) { timer_del(s->frame_timer); timer_free(s->frame_timer); s->frame_timer = NULL; } if (s->bh) { qemu_bh_delete(s->bh); } uhci_async_cancel_all(s); if (!s->masterbus) { usb_bus_release(&s->bus); } } static Property uhci_properties_companion[] = { DEFINE_PROP_STRING("masterbus", UHCIState, masterbus), DEFINE_PROP_UINT32("firstport", UHCIState, firstport, 0), DEFINE_PROP_UINT32("bandwidth", UHCIState, frame_bandwidth, 1280), DEFINE_PROP_UINT32("maxframes", UHCIState, maxframes, 128), DEFINE_PROP_END_OF_LIST(), }; static Property uhci_properties_standalone[] = { DEFINE_PROP_UINT32("bandwidth", UHCIState, frame_bandwidth, 1280), DEFINE_PROP_UINT32("maxframes", UHCIState, maxframes, 128), DEFINE_PROP_END_OF_LIST(), }; static void uhci_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); k->class_id = PCI_CLASS_SERIAL_USB; dc->vmsd = &vmstate_uhci; dc->reset = uhci_reset; set_bit(DEVICE_CATEGORY_USB, dc->categories); } static const TypeInfo uhci_pci_type_info = { .name = TYPE_UHCI, .parent = TYPE_PCI_DEVICE, .instance_size = sizeof(UHCIState), .class_size = sizeof(UHCIPCIDeviceClass), .abstract = true, .class_init = uhci_class_init, }; static void uhci_data_class_init(ObjectClass *klass, void *data) { PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); DeviceClass *dc = DEVICE_CLASS(klass); UHCIPCIDeviceClass *u = container_of(k, UHCIPCIDeviceClass, parent_class); UHCIInfo *info = data; k->realize = info->realize ? info->realize : usb_uhci_common_realize; k->exit = info->unplug ? usb_uhci_exit : NULL; k->vendor_id = info->vendor_id; k->device_id = info->device_id; k->revision = info->revision; if (!info->unplug) { /* uhci controllers in companion setups can't be hotplugged */ dc->hotpluggable = false; dc->props = uhci_properties_companion; } else { dc->props = uhci_properties_standalone; } u->info = *info; } static UHCIInfo uhci_info[] = { { .name = "piix3-usb-uhci", .vendor_id = PCI_VENDOR_ID_INTEL, .device_id = PCI_DEVICE_ID_INTEL_82371SB_2, .revision = 0x01, .irq_pin = 3, .unplug = true, },{ .name = "piix4-usb-uhci", .vendor_id = PCI_VENDOR_ID_INTEL, .device_id = PCI_DEVICE_ID_INTEL_82371AB_2, .revision = 0x01, .irq_pin = 3, .unplug = true, },{ .name = "vt82c686b-usb-uhci", .vendor_id = PCI_VENDOR_ID_VIA, .device_id = PCI_DEVICE_ID_VIA_UHCI, .revision = 0x01, .irq_pin = 3, .realize = usb_uhci_vt82c686b_realize, .unplug = true, },{ .name = "ich9-usb-uhci1", /* 00:1d.0 */ .vendor_id = PCI_VENDOR_ID_INTEL, .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI1, .revision = 0x03, .irq_pin = 0, .unplug = false, },{ .name = "ich9-usb-uhci2", /* 00:1d.1 */ .vendor_id = PCI_VENDOR_ID_INTEL, .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI2, .revision = 0x03, .irq_pin = 1, .unplug = false, },{ .name = "ich9-usb-uhci3", /* 00:1d.2 */ .vendor_id = PCI_VENDOR_ID_INTEL, .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI3, .revision = 0x03, .irq_pin = 2, .unplug = false, },{ .name = "ich9-usb-uhci4", /* 00:1a.0 */ .vendor_id = PCI_VENDOR_ID_INTEL, .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI4, .revision = 0x03, .irq_pin = 0, .unplug = false, },{ .name = "ich9-usb-uhci5", /* 00:1a.1 */ .vendor_id = PCI_VENDOR_ID_INTEL, .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI5, .revision = 0x03, .irq_pin = 1, .unplug = false, },{ .name = "ich9-usb-uhci6", /* 00:1a.2 */ .vendor_id = PCI_VENDOR_ID_INTEL, .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI6, .revision = 0x03, .irq_pin = 2, .unplug = false, } }; static void uhci_register_types(void) { TypeInfo uhci_type_info = { .parent = TYPE_UHCI, .class_init = uhci_data_class_init, }; int i; type_register_static(&uhci_pci_type_info); for (i = 0; i < ARRAY_SIZE(uhci_info); i++) { uhci_type_info.name = uhci_info[i].name; uhci_type_info.class_data = uhci_info + i; type_register(&uhci_type_info); } } type_init(uhci_register_types)