/* * QEMU fulong 2e mini pc support * * Copyright (c) 2008 yajin (yajin@vm-kernel.org) * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn) * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com) * This code is licensed under the GNU GPL v2. * * Contributions after 2012-01-13 are licensed under the terms of the * GNU GPL, version 2 or (at your option) any later version. */ /* * Fulong 2e mini pc is based on ICT/ST Loongson 2e CPU (MIPS III like, 800MHz) * http://www.linux-mips.org/wiki/Fulong * * Loongson 2e user manual: * http://www.loongsondeveloper.com/doc/Loongson2EUserGuide.pdf */ #include "qemu/osdep.h" #include "qemu-common.h" #include "qemu/units.h" #include "qapi/error.h" #include "cpu.h" #include "hw/intc/i8259.h" #include "hw/dma/i8257.h" #include "hw/isa/superio.h" #include "net/net.h" #include "hw/boards.h" #include "hw/i2c/smbus_eeprom.h" #include "hw/block/flash.h" #include "hw/mips/mips.h" #include "hw/mips/cpudevs.h" #include "hw/pci/pci.h" #include "audio/audio.h" #include "qemu/log.h" #include "hw/loader.h" #include "hw/ide.h" #include "elf.h" #include "hw/isa/vt82c686.h" #include "hw/rtc/mc146818rtc.h" #include "hw/timer/i8254.h" #include "exec/address-spaces.h" #include "sysemu/qtest.h" #include "sysemu/reset.h" #include "qemu/error-report.h" #define DEBUG_FULONG2E_INIT #define ENVP_ADDR 0x80002000l #define ENVP_NB_ENTRIES 16 #define ENVP_ENTRY_SIZE 256 /* fulong 2e has a 512k flash: Winbond W39L040AP70Z */ #define BIOS_SIZE (512 * KiB) #define MAX_IDE_BUS 2 /* * PMON is not part of qemu and released with BSD license, anyone * who want to build a pmon binary please first git-clone the source * from the git repository at: * http://www.loongson.cn/support/git/pmon * Then follow the "Compile Guide" available at: * http://dev.lemote.com/code/pmon * * Notes: * 1, don't use the source at http://dev.lemote.com/http_git/pmon.git * 2, use "Bonito2edev" to replace "dir_corresponding_to_your_target_hardware" * in the "Compile Guide". */ #define FULONG_BIOSNAME "pmon_fulong2e.bin" /* PCI SLOT in fulong 2e */ #define FULONG2E_VIA_SLOT 5 #define FULONG2E_ATI_SLOT 6 #define FULONG2E_RTL8139_SLOT 7 static struct _loaderparams { int ram_size; const char *kernel_filename; const char *kernel_cmdline; const char *initrd_filename; } loaderparams; static void GCC_FMT_ATTR(3, 4) prom_set(uint32_t *prom_buf, int index, const char *string, ...) { va_list ap; int32_t table_addr; if (index >= ENVP_NB_ENTRIES) { return; } if (string == NULL) { prom_buf[index] = 0; return; } table_addr = sizeof(int32_t) * ENVP_NB_ENTRIES + index * ENVP_ENTRY_SIZE; prom_buf[index] = tswap32(ENVP_ADDR + table_addr); va_start(ap, string); vsnprintf((char *)prom_buf + table_addr, ENVP_ENTRY_SIZE, string, ap); va_end(ap); } static int64_t load_kernel(CPUMIPSState *env) { int64_t kernel_entry, kernel_low, kernel_high, initrd_size; int index = 0; long kernel_size; ram_addr_t initrd_offset; uint32_t *prom_buf; long prom_size; kernel_size = load_elf(loaderparams.kernel_filename, NULL, cpu_mips_kseg0_to_phys, NULL, (uint64_t *)&kernel_entry, (uint64_t *)&kernel_low, (uint64_t *)&kernel_high, NULL, 0, EM_MIPS, 1, 0); if (kernel_size < 0) { error_report("could not load kernel '%s': %s", loaderparams.kernel_filename, load_elf_strerror(kernel_size)); exit(1); } /* load initrd */ initrd_size = 0; initrd_offset = 0; if (loaderparams.initrd_filename) { initrd_size = get_image_size(loaderparams.initrd_filename); if (initrd_size > 0) { initrd_offset = (kernel_high + ~INITRD_PAGE_MASK) & INITRD_PAGE_MASK; if (initrd_offset + initrd_size > ram_size) { error_report("memory too small for initial ram disk '%s'", loaderparams.initrd_filename); exit(1); } initrd_size = load_image_targphys(loaderparams.initrd_filename, initrd_offset, ram_size - initrd_offset); } if (initrd_size == (target_ulong) -1) { error_report("could not load initial ram disk '%s'", loaderparams.initrd_filename); exit(1); } } /* Setup prom parameters. */ prom_size = ENVP_NB_ENTRIES * (sizeof(int32_t) + ENVP_ENTRY_SIZE); prom_buf = g_malloc(prom_size); prom_set(prom_buf, index++, "%s", loaderparams.kernel_filename); if (initrd_size > 0) { prom_set(prom_buf, index++, "rd_start=0x%" PRIx64 " rd_size=%" PRId64 " %s", cpu_mips_phys_to_kseg0(NULL, initrd_offset), initrd_size, loaderparams.kernel_cmdline); } else { prom_set(prom_buf, index++, "%s", loaderparams.kernel_cmdline); } /* Setup minimum environment variables */ prom_set(prom_buf, index++, "busclock=33000000"); prom_set(prom_buf, index++, "cpuclock=100000000"); prom_set(prom_buf, index++, "memsize=%"PRIi64, loaderparams.ram_size / MiB); prom_set(prom_buf, index++, "modetty0=38400n8r"); prom_set(prom_buf, index++, NULL); rom_add_blob_fixed("prom", prom_buf, prom_size, cpu_mips_kseg0_to_phys(NULL, ENVP_ADDR)); g_free(prom_buf); return kernel_entry; } static void write_bootloader(CPUMIPSState *env, uint8_t *base, int64_t kernel_addr) { uint32_t *p; /* Small bootloader */ p = (uint32_t *)base; /* j 0x1fc00040 */ stl_p(p++, 0x0bf00010); /* nop */ stl_p(p++, 0x00000000); /* Second part of the bootloader */ p = (uint32_t *)(base + 0x040); /* lui a0, 0 */ stl_p(p++, 0x3c040000); /* ori a0, a0, 2 */ stl_p(p++, 0x34840002); /* lui a1, high(ENVP_ADDR) */ stl_p(p++, 0x3c050000 | ((ENVP_ADDR >> 16) & 0xffff)); /* ori a1, a0, low(ENVP_ADDR) */ stl_p(p++, 0x34a50000 | (ENVP_ADDR & 0xffff)); /* lui a2, high(ENVP_ADDR + 8) */ stl_p(p++, 0x3c060000 | (((ENVP_ADDR + 8) >> 16) & 0xffff)); /* ori a2, a2, low(ENVP_ADDR + 8) */ stl_p(p++, 0x34c60000 | ((ENVP_ADDR + 8) & 0xffff)); /* lui a3, high(env->ram_size) */ stl_p(p++, 0x3c070000 | (loaderparams.ram_size >> 16)); /* ori a3, a3, low(env->ram_size) */ stl_p(p++, 0x34e70000 | (loaderparams.ram_size & 0xffff)); /* lui ra, high(kernel_addr) */ stl_p(p++, 0x3c1f0000 | ((kernel_addr >> 16) & 0xffff)); /* ori ra, ra, low(kernel_addr) */ stl_p(p++, 0x37ff0000 | (kernel_addr & 0xffff)); /* jr ra */ stl_p(p++, 0x03e00008); /* nop */ stl_p(p++, 0x00000000); } static void main_cpu_reset(void *opaque) { MIPSCPU *cpu = opaque; CPUMIPSState *env = &cpu->env; cpu_reset(CPU(cpu)); /* TODO: 2E reset stuff */ if (loaderparams.kernel_filename) { env->CP0_Status &= ~((1 << CP0St_BEV) | (1 << CP0St_ERL)); } } static void vt82c686b_southbridge_init(PCIBus *pci_bus, int slot, qemu_irq intc, I2CBus **i2c_bus, ISABus **p_isa_bus) { qemu_irq *i8259; ISABus *isa_bus; DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS]; isa_bus = vt82c686b_isa_init(pci_bus, PCI_DEVFN(slot, 0)); if (!isa_bus) { fprintf(stderr, "vt82c686b_init error\n"); exit(1); } *p_isa_bus = isa_bus; /* Interrupt controller */ /* The 8259 -> IP5 */ i8259 = i8259_init(isa_bus, intc); isa_bus_irqs(isa_bus, i8259); /* init other devices */ i8254_pit_init(isa_bus, 0x40, 0, NULL); i8257_dma_init(isa_bus, 0); /* Super I/O */ isa_create_simple(isa_bus, TYPE_VT82C686B_SUPERIO); ide_drive_get(hd, ARRAY_SIZE(hd)); via_ide_init(pci_bus, hd, PCI_DEVFN(slot, 1)); pci_create_simple(pci_bus, PCI_DEVFN(slot, 2), "vt82c686b-usb-uhci"); pci_create_simple(pci_bus, PCI_DEVFN(slot, 3), "vt82c686b-usb-uhci"); *i2c_bus = vt82c686b_pm_init(pci_bus, PCI_DEVFN(slot, 4), 0xeee1, NULL); /* Audio support */ vt82c686b_ac97_init(pci_bus, PCI_DEVFN(slot, 5)); vt82c686b_mc97_init(pci_bus, PCI_DEVFN(slot, 6)); } /* Network support */ static void network_init(PCIBus *pci_bus) { int i; for (i = 0; i < nb_nics; i++) { NICInfo *nd = &nd_table[i]; const char *default_devaddr = NULL; if (i == 0 && (!nd->model || strcmp(nd->model, "rtl8139") == 0)) { /* The fulong board has a RTL8139 card using PCI SLOT 7 */ default_devaddr = "07"; } pci_nic_init_nofail(nd, pci_bus, "rtl8139", default_devaddr); } } static void mips_fulong2e_init(MachineState *machine) { const char *kernel_filename = machine->kernel_filename; const char *kernel_cmdline = machine->kernel_cmdline; const char *initrd_filename = machine->initrd_filename; char *filename; MemoryRegion *address_space_mem = get_system_memory(); MemoryRegion *ram = g_new(MemoryRegion, 1); MemoryRegion *bios = g_new(MemoryRegion, 1); ram_addr_t ram_size = machine->ram_size; long bios_size; uint8_t *spd_data; Error *err = NULL; int64_t kernel_entry; PCIBus *pci_bus; ISABus *isa_bus; I2CBus *smbus; MIPSCPU *cpu; CPUMIPSState *env; DeviceState *dev; /* init CPUs */ cpu = MIPS_CPU(cpu_create(machine->cpu_type)); env = &cpu->env; qemu_register_reset(main_cpu_reset, cpu); /* TODO: support more than 256M RAM as highmem */ ram_size = 256 * MiB; /* allocate RAM */ memory_region_allocate_system_memory(ram, NULL, "fulong2e.ram", ram_size); memory_region_init_ram(bios, NULL, "fulong2e.bios", BIOS_SIZE, &error_fatal); memory_region_set_readonly(bios, true); memory_region_add_subregion(address_space_mem, 0, ram); memory_region_add_subregion(address_space_mem, 0x1fc00000LL, bios); /* * We do not support flash operation, just loading pmon.bin as raw BIOS. * Please use -L to set the BIOS path and -bios to set bios name. */ if (kernel_filename) { loaderparams.ram_size = ram_size; loaderparams.kernel_filename = kernel_filename; loaderparams.kernel_cmdline = kernel_cmdline; loaderparams.initrd_filename = initrd_filename; kernel_entry = load_kernel(env); write_bootloader(env, memory_region_get_ram_ptr(bios), kernel_entry); } else { if (bios_name == NULL) { bios_name = FULONG_BIOSNAME; } filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name); if (filename) { bios_size = load_image_targphys(filename, 0x1fc00000LL, BIOS_SIZE); g_free(filename); } else { bios_size = -1; } if ((bios_size < 0 || bios_size > BIOS_SIZE) && !kernel_filename && !qtest_enabled()) { error_report("Could not load MIPS bios '%s'", bios_name); exit(1); } } /* Init internal devices */ cpu_mips_irq_init_cpu(cpu); cpu_mips_clock_init(cpu); /* North bridge, Bonito --> IP2 */ pci_bus = bonito_init((qemu_irq *)&(env->irq[2])); /* South bridge -> IP5 */ vt82c686b_southbridge_init(pci_bus, FULONG2E_VIA_SLOT, env->irq[5], &smbus, &isa_bus); /* GPU */ if (vga_interface_type != VGA_NONE) { dev = DEVICE(pci_create(pci_bus, -1, "ati-vga")); qdev_prop_set_uint32(dev, "vgamem_mb", 16); qdev_prop_set_uint16(dev, "x-device-id", 0x5159); qdev_init_nofail(dev); } /* Populate SPD eeprom data */ spd_data = spd_data_generate(DDR, ram_size, &err); if (err) { warn_report_err(err); } if (spd_data) { smbus_eeprom_init_one(smbus, 0x50, spd_data); } mc146818_rtc_init(isa_bus, 2000, NULL); /* Network card: RTL8139D */ network_init(pci_bus); } static void mips_fulong2e_machine_init(MachineClass *mc) { mc->desc = "Fulong 2e mini pc"; mc->init = mips_fulong2e_init; mc->block_default_type = IF_IDE; mc->default_cpu_type = MIPS_CPU_TYPE_NAME("Loongson-2E"); mc->default_ram_size = 256 * MiB; } DEFINE_MACHINE("fulong2e", mips_fulong2e_machine_init)