/* * i.MX31 Vectored Interrupt Controller * * Note this is NOT the PL192 provided by ARM, but * a custom implementation by Freescale. * * Copyright (c) 2008 OKL * Copyright (c) 2011 NICTA Pty Ltd * Originally written by Hans Jiang * Updated by Jean-Christophe Dubois * * This code is licensed under the GPL version 2 or later. See * the COPYING file in the top-level directory. * * TODO: implement vectors. */ #include "qemu/osdep.h" #include "hw/intc/imx_avic.h" #include "hw/irq.h" #include "qemu/log.h" #include "qemu/module.h" #ifndef DEBUG_IMX_AVIC #define DEBUG_IMX_AVIC 0 #endif #define DPRINTF(fmt, args...) \ do { \ if (DEBUG_IMX_AVIC) { \ fprintf(stderr, "[%s]%s: " fmt , TYPE_IMX_AVIC, \ __func__, ##args); \ } \ } while (0) static const VMStateDescription vmstate_imx_avic = { .name = TYPE_IMX_AVIC, .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { VMSTATE_UINT64(pending, IMXAVICState), VMSTATE_UINT64(enabled, IMXAVICState), VMSTATE_UINT64(is_fiq, IMXAVICState), VMSTATE_UINT32(intcntl, IMXAVICState), VMSTATE_UINT32(intmask, IMXAVICState), VMSTATE_UINT32_ARRAY(prio, IMXAVICState, PRIO_WORDS), VMSTATE_END_OF_LIST() }, }; static inline int imx_avic_prio(IMXAVICState *s, int irq) { uint32_t word = irq / PRIO_PER_WORD; uint32_t part = 4 * (irq % PRIO_PER_WORD); return 0xf & (s->prio[word] >> part); } /* Update interrupts. */ static void imx_avic_update(IMXAVICState *s) { int i; uint64_t new = s->pending & s->enabled; uint64_t flags; flags = new & s->is_fiq; qemu_set_irq(s->fiq, !!flags); flags = new & ~s->is_fiq; if (!flags || (s->intmask == 0x1f)) { qemu_set_irq(s->irq, !!flags); return; } /* * Take interrupt if there's a pending interrupt with * priority higher than the value of intmask */ for (i = 0; i < IMX_AVIC_NUM_IRQS; i++) { if (flags & (1UL << i)) { if (imx_avic_prio(s, i) > s->intmask) { qemu_set_irq(s->irq, 1); return; } } } qemu_set_irq(s->irq, 0); } static void imx_avic_set_irq(void *opaque, int irq, int level) { IMXAVICState *s = (IMXAVICState *)opaque; if (level) { DPRINTF("Raising IRQ %d, prio %d\n", irq, imx_avic_prio(s, irq)); s->pending |= (1ULL << irq); } else { DPRINTF("Clearing IRQ %d, prio %d\n", irq, imx_avic_prio(s, irq)); s->pending &= ~(1ULL << irq); } imx_avic_update(s); } static uint64_t imx_avic_read(void *opaque, hwaddr offset, unsigned size) { IMXAVICState *s = (IMXAVICState *)opaque; DPRINTF("read(offset = 0x%" HWADDR_PRIx ")\n", offset); switch (offset >> 2) { case 0: /* INTCNTL */ return s->intcntl; case 1: /* Normal Interrupt Mask Register, NIMASK */ return s->intmask; case 2: /* Interrupt Enable Number Register, INTENNUM */ case 3: /* Interrupt Disable Number Register, INTDISNUM */ return 0; case 4: /* Interrupt Enabled Number Register High */ return s->enabled >> 32; case 5: /* Interrupt Enabled Number Register Low */ return s->enabled & 0xffffffffULL; case 6: /* Interrupt Type Register High */ return s->is_fiq >> 32; case 7: /* Interrupt Type Register Low */ return s->is_fiq & 0xffffffffULL; case 8: /* Normal Interrupt Priority Register 7 */ case 9: /* Normal Interrupt Priority Register 6 */ case 10:/* Normal Interrupt Priority Register 5 */ case 11:/* Normal Interrupt Priority Register 4 */ case 12:/* Normal Interrupt Priority Register 3 */ case 13:/* Normal Interrupt Priority Register 2 */ case 14:/* Normal Interrupt Priority Register 1 */ case 15:/* Normal Interrupt Priority Register 0 */ return s->prio[15-(offset>>2)]; case 16: /* Normal interrupt vector and status register */ { /* * This returns the highest priority * outstanding interrupt. Where there is more than * one pending IRQ with the same priority, * take the highest numbered one. */ uint64_t flags = s->pending & s->enabled & ~s->is_fiq; int i; int prio = -1; int irq = -1; for (i = 63; i >= 0; --i) { if (flags & (1ULL< prio) { irq = i; prio = irq_prio; } } } if (irq >= 0) { imx_avic_set_irq(s, irq, 0); return irq << 16 | prio; } return 0xffffffffULL; } case 17:/* Fast Interrupt vector and status register */ { uint64_t flags = s->pending & s->enabled & s->is_fiq; int i = ctz64(flags); if (i < 64) { imx_avic_set_irq(opaque, i, 0); return i; } return 0xffffffffULL; } case 18:/* Interrupt source register high */ return s->pending >> 32; case 19:/* Interrupt source register low */ return s->pending & 0xffffffffULL; case 20:/* Interrupt Force Register high */ case 21:/* Interrupt Force Register low */ return 0; case 22:/* Normal Interrupt Pending Register High */ return (s->pending & s->enabled & ~s->is_fiq) >> 32; case 23:/* Normal Interrupt Pending Register Low */ return (s->pending & s->enabled & ~s->is_fiq) & 0xffffffffULL; case 24: /* Fast Interrupt Pending Register High */ return (s->pending & s->enabled & s->is_fiq) >> 32; case 25: /* Fast Interrupt Pending Register Low */ return (s->pending & s->enabled & s->is_fiq) & 0xffffffffULL; case 0x40: /* AVIC vector 0, use for WFI WAR */ return 0x4; default: qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" HWADDR_PRIx "\n", TYPE_IMX_AVIC, __func__, offset); return 0; } } static void imx_avic_write(void *opaque, hwaddr offset, uint64_t val, unsigned size) { IMXAVICState *s = (IMXAVICState *)opaque; /* Vector Registers not yet supported */ if (offset >= 0x100 && offset <= 0x2fc) { qemu_log_mask(LOG_UNIMP, "[%s]%s: vector %d ignored\n", TYPE_IMX_AVIC, __func__, (int)((offset - 0x100) >> 2)); return; } DPRINTF("(0x%" HWADDR_PRIx ") = 0x%x\n", offset, (unsigned int)val); switch (offset >> 2) { case 0: /* Interrupt Control Register, INTCNTL */ s->intcntl = val & (ABFEN | NIDIS | FIDIS | NIAD | FIAD | NM); if (s->intcntl & ABFEN) { s->intcntl &= ~(val & ABFLAG); } break; case 1: /* Normal Interrupt Mask Register, NIMASK */ s->intmask = val & 0x1f; break; case 2: /* Interrupt Enable Number Register, INTENNUM */ DPRINTF("enable(%d)\n", (int)val); val &= 0x3f; s->enabled |= (1ULL << val); break; case 3: /* Interrupt Disable Number Register, INTDISNUM */ DPRINTF("disable(%d)\n", (int)val); val &= 0x3f; s->enabled &= ~(1ULL << val); break; case 4: /* Interrupt Enable Number Register High */ s->enabled = (s->enabled & 0xffffffffULL) | (val << 32); break; case 5: /* Interrupt Enable Number Register Low */ s->enabled = (s->enabled & 0xffffffff00000000ULL) | val; break; case 6: /* Interrupt Type Register High */ s->is_fiq = (s->is_fiq & 0xffffffffULL) | (val << 32); break; case 7: /* Interrupt Type Register Low */ s->is_fiq = (s->is_fiq & 0xffffffff00000000ULL) | val; break; case 8: /* Normal Interrupt Priority Register 7 */ case 9: /* Normal Interrupt Priority Register 6 */ case 10:/* Normal Interrupt Priority Register 5 */ case 11:/* Normal Interrupt Priority Register 4 */ case 12:/* Normal Interrupt Priority Register 3 */ case 13:/* Normal Interrupt Priority Register 2 */ case 14:/* Normal Interrupt Priority Register 1 */ case 15:/* Normal Interrupt Priority Register 0 */ s->prio[15-(offset>>2)] = val; break; /* Read-only registers, writes ignored */ case 16:/* Normal Interrupt Vector and Status register */ case 17:/* Fast Interrupt vector and status register */ case 18:/* Interrupt source register high */ case 19:/* Interrupt source register low */ return; case 20:/* Interrupt Force Register high */ s->pending = (s->pending & 0xffffffffULL) | (val << 32); break; case 21:/* Interrupt Force Register low */ s->pending = (s->pending & 0xffffffff00000000ULL) | val; break; case 22:/* Normal Interrupt Pending Register High */ case 23:/* Normal Interrupt Pending Register Low */ case 24: /* Fast Interrupt Pending Register High */ case 25: /* Fast Interrupt Pending Register Low */ return; default: qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" HWADDR_PRIx "\n", TYPE_IMX_AVIC, __func__, offset); } imx_avic_update(s); } static const MemoryRegionOps imx_avic_ops = { .read = imx_avic_read, .write = imx_avic_write, .endianness = DEVICE_NATIVE_ENDIAN, }; static void imx_avic_reset(DeviceState *dev) { IMXAVICState *s = IMX_AVIC(dev); s->pending = 0; s->enabled = 0; s->is_fiq = 0; s->intmask = 0x1f; s->intcntl = 0; memset(s->prio, 0, sizeof s->prio); } static void imx_avic_init(Object *obj) { DeviceState *dev = DEVICE(obj); IMXAVICState *s = IMX_AVIC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); memory_region_init_io(&s->iomem, obj, &imx_avic_ops, s, TYPE_IMX_AVIC, 0x1000); sysbus_init_mmio(sbd, &s->iomem); qdev_init_gpio_in(dev, imx_avic_set_irq, IMX_AVIC_NUM_IRQS); sysbus_init_irq(sbd, &s->irq); sysbus_init_irq(sbd, &s->fiq); } static void imx_avic_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); dc->vmsd = &vmstate_imx_avic; dc->reset = imx_avic_reset; dc->desc = "i.MX Advanced Vector Interrupt Controller"; } static const TypeInfo imx_avic_info = { .name = TYPE_IMX_AVIC, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(IMXAVICState), .instance_init = imx_avic_init, .class_init = imx_avic_class_init, }; static void imx_avic_register_types(void) { type_register_static(&imx_avic_info); } type_init(imx_avic_register_types)