HXCOMM Use DEFHEADING() to define headings in both help text and texi HXCOMM Text between STEXI and ETEXI are copied to texi version and HXCOMM discarded from C version HXCOMM DEF(command, args, callback, arg_string, help) is used to construct HXCOMM monitor commands HXCOMM HXCOMM can be used for comments, discarded from both texi and C STEXI @table @option ETEXI { .name = "help|?", .args_type = "name:S?", .params = "[cmd]", .help = "show the help", .mhandler.cmd = do_help_cmd, }, STEXI @item help or ? [@var{cmd}] @findex help Show the help for all commands or just for command @var{cmd}. ETEXI { .name = "commit", .args_type = "device:B", .params = "device|all", .help = "commit changes to the disk images (if -snapshot is used) or backing files", .mhandler.cmd = do_commit, }, STEXI @item commit @findex commit Commit changes to the disk images (if -snapshot is used) or backing files. If the backing file is smaller than the snapshot, then the backing file will be resized to be the same size as the snapshot. If the snapshot is smaller than the backing file, the backing file will not be truncated. If you want the backing file to match the size of the smaller snapshot, you can safely truncate it yourself once the commit operation successfully completes. ETEXI { .name = "q|quit", .args_type = "", .params = "", .help = "quit the emulator", .user_print = monitor_user_noop, .mhandler.cmd = hmp_quit, }, STEXI @item q or quit @findex quit Quit the emulator. ETEXI { .name = "block_resize", .args_type = "device:B,size:o", .params = "device size", .help = "resize a block image", .mhandler.cmd = hmp_block_resize, }, STEXI @item block_resize @findex block_resize Resize a block image while a guest is running. Usually requires guest action to see the updated size. Resize to a lower size is supported, but should be used with extreme caution. Note that this command only resizes image files, it can not resize block devices like LVM volumes. ETEXI { .name = "block_stream", .args_type = "device:B,speed:o?,base:s?", .params = "device [speed [base]]", .help = "copy data from a backing file into a block device", .mhandler.cmd = hmp_block_stream, }, STEXI @item block_stream @findex block_stream Copy data from a backing file into a block device. ETEXI { .name = "block_job_set_speed", .args_type = "device:B,speed:o", .params = "device speed", .help = "set maximum speed for a background block operation", .mhandler.cmd = hmp_block_job_set_speed, }, STEXI @item block_job_set_speed @findex block_job_set_speed Set maximum speed for a background block operation. ETEXI { .name = "block_job_cancel", .args_type = "force:-f,device:B", .params = "[-f] device", .help = "stop an active background block operation (use -f" "\n\t\t\t if the operation is currently paused)", .mhandler.cmd = hmp_block_job_cancel, }, STEXI @item block_job_cancel @findex block_job_cancel Stop an active background block operation (streaming, mirroring). ETEXI { .name = "block_job_complete", .args_type = "device:B", .params = "device", .help = "stop an active background block operation", .mhandler.cmd = hmp_block_job_complete, }, STEXI @item block_job_complete @findex block_job_complete Manually trigger completion of an active background block operation. For mirroring, this will switch the device to the destination path. ETEXI { .name = "block_job_pause", .args_type = "device:B", .params = "device", .help = "pause an active background block operation", .mhandler.cmd = hmp_block_job_pause, }, STEXI @item block_job_pause @findex block_job_pause Pause an active block streaming operation. ETEXI { .name = "block_job_resume", .args_type = "device:B", .params = "device", .help = "resume a paused background block operation", .mhandler.cmd = hmp_block_job_resume, }, STEXI @item block_job_resume @findex block_job_resume Resume a paused block streaming operation. ETEXI { .name = "eject", .args_type = "force:-f,device:B", .params = "[-f] device", .help = "eject a removable medium (use -f to force it)", .mhandler.cmd = hmp_eject, }, STEXI @item eject [-f] @var{device} @findex eject Eject a removable medium (use -f to force it). ETEXI { .name = "drive_del", .args_type = "id:s", .params = "device", .help = "remove host block device", .user_print = monitor_user_noop, .mhandler.cmd_new = do_drive_del, }, STEXI @item drive_del @var{device} @findex drive_del Remove host block device. The result is that guest generated IO is no longer submitted against the host device underlying the disk. Once a drive has been deleted, the QEMU Block layer returns -EIO which results in IO errors in the guest for applications that are reading/writing to the device. These errors are always reported to the guest, regardless of the drive's error actions (drive options rerror, werror). ETEXI { .name = "change", .args_type = "device:B,target:F,arg:s?", .params = "device filename [format]", .help = "change a removable medium, optional format", .mhandler.cmd = hmp_change, }, STEXI @item change @var{device} @var{setting} @findex change Change the configuration of a device. @table @option @item change @var{diskdevice} @var{filename} [@var{format}] Change the medium for a removable disk device to point to @var{filename}. eg @example (qemu) change ide1-cd0 /path/to/some.iso @end example @var{format} is optional. @item change vnc @var{display},@var{options} Change the configuration of the VNC server. The valid syntax for @var{display} and @var{options} are described at @ref{sec_invocation}. eg @example (qemu) change vnc localhost:1 @end example @item change vnc password [@var{password}] Change the password associated with the VNC server. If the new password is not supplied, the monitor will prompt for it to be entered. VNC passwords are only significant up to 8 letters. eg @example (qemu) change vnc password Password: ******** @end example @end table ETEXI { .name = "screendump", .args_type = "filename:F", .params = "filename", .help = "save screen into PPM image 'filename'", .mhandler.cmd = hmp_screen_dump, }, STEXI @item screendump @var{filename} @findex screendump Save screen into PPM image @var{filename}. ETEXI { .name = "logfile", .args_type = "filename:F", .params = "filename", .help = "output logs to 'filename'", .mhandler.cmd = do_logfile, }, STEXI @item logfile @var{filename} @findex logfile Output logs to @var{filename}. ETEXI { .name = "trace-event", .args_type = "name:s,option:b", .params = "name on|off", .help = "changes status of a specific trace event", .mhandler.cmd = do_trace_event_set_state, }, STEXI @item trace-event @findex trace-event changes status of a trace event ETEXI #if defined(CONFIG_TRACE_SIMPLE) { .name = "trace-file", .args_type = "op:s?,arg:F?", .params = "on|off|flush|set [arg]", .help = "open, close, or flush trace file, or set a new file name", .mhandler.cmd = do_trace_file, }, STEXI @item trace-file on|off|flush @findex trace-file Open, close, or flush the trace file. If no argument is given, the status of the trace file is displayed. ETEXI #endif { .name = "log", .args_type = "items:s", .params = "item1[,...]", .help = "activate logging of the specified items", .mhandler.cmd = do_log, }, STEXI @item log @var{item1}[,...] @findex log Activate logging of the specified items. ETEXI { .name = "savevm", .args_type = "name:s?", .params = "[tag|id]", .help = "save a VM snapshot. If no tag or id are provided, a new snapshot is created", .mhandler.cmd = do_savevm, }, STEXI @item savevm [@var{tag}|@var{id}] @findex savevm Create a snapshot of the whole virtual machine. If @var{tag} is provided, it is used as human readable identifier. If there is already a snapshot with the same tag or ID, it is replaced. More info at @ref{vm_snapshots}. ETEXI { .name = "loadvm", .args_type = "name:s", .params = "tag|id", .help = "restore a VM snapshot from its tag or id", .mhandler.cmd = do_loadvm, }, STEXI @item loadvm @var{tag}|@var{id} @findex loadvm Set the whole virtual machine to the snapshot identified by the tag @var{tag} or the unique snapshot ID @var{id}. ETEXI { .name = "delvm", .args_type = "name:s", .params = "tag|id", .help = "delete a VM snapshot from its tag or id", .mhandler.cmd = do_delvm, }, STEXI @item delvm @var{tag}|@var{id} @findex delvm Delete the snapshot identified by @var{tag} or @var{id}. ETEXI { .name = "singlestep", .args_type = "option:s?", .params = "[on|off]", .help = "run emulation in singlestep mode or switch to normal mode", .mhandler.cmd = do_singlestep, }, STEXI @item singlestep [off] @findex singlestep Run the emulation in single step mode. If called with option off, the emulation returns to normal mode. ETEXI { .name = "stop", .args_type = "", .params = "", .help = "stop emulation", .mhandler.cmd = hmp_stop, }, STEXI @item stop @findex stop Stop emulation. ETEXI { .name = "c|cont", .args_type = "", .params = "", .help = "resume emulation", .mhandler.cmd = hmp_cont, }, STEXI @item c or cont @findex cont Resume emulation. ETEXI { .name = "system_wakeup", .args_type = "", .params = "", .help = "wakeup guest from suspend", .mhandler.cmd = hmp_system_wakeup, }, STEXI @item system_wakeup @findex system_wakeup Wakeup guest from suspend. ETEXI { .name = "gdbserver", .args_type = "device:s?", .params = "[device]", .help = "start gdbserver on given device (default 'tcp::1234'), stop with 'none'", .mhandler.cmd = do_gdbserver, }, STEXI @item gdbserver [@var{port}] @findex gdbserver Start gdbserver session (default @var{port}=1234) ETEXI { .name = "x", .args_type = "fmt:/,addr:l", .params = "/fmt addr", .help = "virtual memory dump starting at 'addr'", .mhandler.cmd = do_memory_dump, }, STEXI @item x/fmt @var{addr} @findex x Virtual memory dump starting at @var{addr}. ETEXI { .name = "xp", .args_type = "fmt:/,addr:l", .params = "/fmt addr", .help = "physical memory dump starting at 'addr'", .mhandler.cmd = do_physical_memory_dump, }, STEXI @item xp /@var{fmt} @var{addr} @findex xp Physical memory dump starting at @var{addr}. @var{fmt} is a format which tells the command how to format the data. Its syntax is: @option{/@{count@}@{format@}@{size@}} @table @var @item count is the number of items to be dumped. @item format can be x (hex), d (signed decimal), u (unsigned decimal), o (octal), c (char) or i (asm instruction). @item size can be b (8 bits), h (16 bits), w (32 bits) or g (64 bits). On x86, @code{h} or @code{w} can be specified with the @code{i} format to respectively select 16 or 32 bit code instruction size. @end table Examples: @itemize @item Dump 10 instructions at the current instruction pointer: @example (qemu) x/10i $eip 0x90107063: ret 0x90107064: sti 0x90107065: lea 0x0(%esi,1),%esi 0x90107069: lea 0x0(%edi,1),%edi 0x90107070: ret 0x90107071: jmp 0x90107080 0x90107073: nop 0x90107074: nop 0x90107075: nop 0x90107076: nop @end example @item Dump 80 16 bit values at the start of the video memory. @smallexample (qemu) xp/80hx 0xb8000 0x000b8000: 0x0b50 0x0b6c 0x0b65 0x0b78 0x0b38 0x0b36 0x0b2f 0x0b42 0x000b8010: 0x0b6f 0x0b63 0x0b68 0x0b73 0x0b20 0x0b56 0x0b47 0x0b41 0x000b8020: 0x0b42 0x0b69 0x0b6f 0x0b73 0x0b20 0x0b63 0x0b75 0x0b72 0x000b8030: 0x0b72 0x0b65 0x0b6e 0x0b74 0x0b2d 0x0b63 0x0b76 0x0b73 0x000b8040: 0x0b20 0x0b30 0x0b35 0x0b20 0x0b4e 0x0b6f 0x0b76 0x0b20 0x000b8050: 0x0b32 0x0b30 0x0b30 0x0b33 0x0720 0x0720 0x0720 0x0720 0x000b8060: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x000b8070: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x000b8080: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x000b8090: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 @end smallexample @end itemize ETEXI { .name = "p|print", .args_type = "fmt:/,val:l", .params = "/fmt expr", .help = "print expression value (use $reg for CPU register access)", .mhandler.cmd = do_print, }, STEXI @item p or print/@var{fmt} @var{expr} @findex print Print expression value. Only the @var{format} part of @var{fmt} is used. ETEXI { .name = "i", .args_type = "fmt:/,addr:i,index:i.", .params = "/fmt addr", .help = "I/O port read", .mhandler.cmd = do_ioport_read, }, STEXI Read I/O port. ETEXI { .name = "o", .args_type = "fmt:/,addr:i,val:i", .params = "/fmt addr value", .help = "I/O port write", .mhandler.cmd = do_ioport_write, }, STEXI Write to I/O port. ETEXI { .name = "sendkey", .args_type = "keys:s,hold-time:i?", .params = "keys [hold_ms]", .help = "send keys to the VM (e.g. 'sendkey ctrl-alt-f1', default hold time=100 ms)", .mhandler.cmd = hmp_send_key, }, STEXI @item sendkey @var{keys} @findex sendkey Send @var{keys} to the guest. @var{keys} could be the name of the key or the raw value in hexadecimal format. Use @code{-} to press several keys simultaneously. Example: @example sendkey ctrl-alt-f1 @end example This command is useful to send keys that your graphical user interface intercepts at low level, such as @code{ctrl-alt-f1} in X Window. ETEXI { .name = "system_reset", .args_type = "", .params = "", .help = "reset the system", .mhandler.cmd = hmp_system_reset, }, STEXI @item system_reset @findex system_reset Reset the system. ETEXI { .name = "system_powerdown", .args_type = "", .params = "", .help = "send system power down event", .mhandler.cmd = hmp_system_powerdown, }, STEXI @item system_powerdown @findex system_powerdown Power down the system (if supported). ETEXI { .name = "sum", .args_type = "start:i,size:i", .params = "addr size", .help = "compute the checksum of a memory region", .mhandler.cmd = do_sum, }, STEXI @item sum @var{addr} @var{size} @findex sum Compute the checksum of a memory region. ETEXI { .name = "usb_add", .args_type = "devname:s", .params = "device", .help = "add USB device (e.g. 'host:bus.addr' or 'host:vendor_id:product_id')", .mhandler.cmd = do_usb_add, }, STEXI @item usb_add @var{devname} @findex usb_add Add the USB device @var{devname}. For details of available devices see @ref{usb_devices} ETEXI { .name = "usb_del", .args_type = "devname:s", .params = "device", .help = "remove USB device 'bus.addr'", .mhandler.cmd = do_usb_del, }, STEXI @item usb_del @var{devname} @findex usb_del Remove the USB device @var{devname} from the QEMU virtual USB hub. @var{devname} has the syntax @code{bus.addr}. Use the monitor command @code{info usb} to see the devices you can remove. ETEXI { .name = "device_add", .args_type = "device:O", .params = "driver[,prop=value][,...]", .help = "add device, like -device on the command line", .user_print = monitor_user_noop, .mhandler.cmd_new = do_device_add, }, STEXI @item device_add @var{config} @findex device_add Add device. ETEXI { .name = "device_del", .args_type = "id:s", .params = "device", .help = "remove device", .mhandler.cmd = hmp_device_del, }, STEXI @item device_del @var{id} @findex device_del Remove device @var{id}. ETEXI { .name = "cpu", .args_type = "index:i", .params = "index", .help = "set the default CPU", .mhandler.cmd = hmp_cpu, }, STEXI @item cpu @var{index} @findex cpu Set the default CPU. ETEXI { .name = "mouse_move", .args_type = "dx_str:s,dy_str:s,dz_str:s?", .params = "dx dy [dz]", .help = "send mouse move events", .mhandler.cmd = do_mouse_move, }, STEXI @item mouse_move @var{dx} @var{dy} [@var{dz}] @findex mouse_move Move the active mouse to the specified coordinates @var{dx} @var{dy} with optional scroll axis @var{dz}. ETEXI { .name = "mouse_button", .args_type = "button_state:i", .params = "state", .help = "change mouse button state (1=L, 2=M, 4=R)", .mhandler.cmd = do_mouse_button, }, STEXI @item mouse_button @var{val} @findex mouse_button Change the active mouse button state @var{val} (1=L, 2=M, 4=R). ETEXI { .name = "mouse_set", .args_type = "index:i", .params = "index", .help = "set which mouse device receives events", .mhandler.cmd = do_mouse_set, }, STEXI @item mouse_set @var{index} @findex mouse_set Set which mouse device receives events at given @var{index}, index can be obtained with @example info mice @end example ETEXI { .name = "wavcapture", .args_type = "path:F,freq:i?,bits:i?,nchannels:i?", .params = "path [frequency [bits [channels]]]", .help = "capture audio to a wave file (default frequency=44100 bits=16 channels=2)", .mhandler.cmd = do_wav_capture, }, STEXI @item wavcapture @var{filename} [@var{frequency} [@var{bits} [@var{channels}]]] @findex wavcapture Capture audio into @var{filename}. Using sample rate @var{frequency} bits per sample @var{bits} and number of channels @var{channels}. Defaults: @itemize @minus @item Sample rate = 44100 Hz - CD quality @item Bits = 16 @item Number of channels = 2 - Stereo @end itemize ETEXI { .name = "stopcapture", .args_type = "n:i", .params = "capture index", .help = "stop capture", .mhandler.cmd = do_stop_capture, }, STEXI @item stopcapture @var{index} @findex stopcapture Stop capture with a given @var{index}, index can be obtained with @example info capture @end example ETEXI { .name = "memsave", .args_type = "val:l,size:i,filename:s", .params = "addr size file", .help = "save to disk virtual memory dump starting at 'addr' of size 'size'", .mhandler.cmd = hmp_memsave, }, STEXI @item memsave @var{addr} @var{size} @var{file} @findex memsave save to disk virtual memory dump starting at @var{addr} of size @var{size}. ETEXI { .name = "pmemsave", .args_type = "val:l,size:i,filename:s", .params = "addr size file", .help = "save to disk physical memory dump starting at 'addr' of size 'size'", .mhandler.cmd = hmp_pmemsave, }, STEXI @item pmemsave @var{addr} @var{size} @var{file} @findex pmemsave save to disk physical memory dump starting at @var{addr} of size @var{size}. ETEXI { .name = "boot_set", .args_type = "bootdevice:s", .params = "bootdevice", .help = "define new values for the boot device list", .mhandler.cmd = do_boot_set, }, STEXI @item boot_set @var{bootdevicelist} @findex boot_set Define new values for the boot device list. Those values will override the values specified on the command line through the @code{-boot} option. The values that can be specified here depend on the machine type, but are the same that can be specified in the @code{-boot} command line option. ETEXI #if defined(TARGET_I386) || defined(TARGET_S390X) { .name = "nmi", .args_type = "", .params = "", .help = "inject an NMI on all guest's CPUs", .mhandler.cmd = hmp_inject_nmi, }, #endif STEXI @item nmi @var{cpu} @findex nmi Inject an NMI (x86) or RESTART (s390x) on the given CPU. ETEXI { .name = "ringbuf_write", .args_type = "device:s,data:s", .params = "device data", .help = "Write to a ring buffer character device", .mhandler.cmd = hmp_ringbuf_write, }, STEXI @item ringbuf_write @var{device} @var{data} @findex ringbuf_write Write @var{data} to ring buffer character device @var{device}. @var{data} must be a UTF-8 string. ETEXI { .name = "ringbuf_read", .args_type = "device:s,size:i", .params = "device size", .help = "Read from a ring buffer character device", .mhandler.cmd = hmp_ringbuf_read, }, STEXI @item ringbuf_read @var{device} @findex ringbuf_read Read and print up to @var{size} bytes from ring buffer character device @var{device}. Certain non-printable characters are printed \uXXXX, where XXXX is the character code in hexadecimal. Character \ is printed \\. Bug: can screw up when the buffer contains invalid UTF-8 sequences, NUL characters, after the ring buffer lost data, and when reading stops because the size limit is reached. ETEXI { .name = "migrate", .args_type = "detach:-d,blk:-b,inc:-i,uri:s", .params = "[-d] [-b] [-i] uri", .help = "migrate to URI (using -d to not wait for completion)" "\n\t\t\t -b for migration without shared storage with" " full copy of disk\n\t\t\t -i for migration without " "shared storage with incremental copy of disk " "(base image shared between src and destination)", .mhandler.cmd = hmp_migrate, }, STEXI @item migrate [-d] [-b] [-i] @var{uri} @findex migrate Migrate to @var{uri} (using -d to not wait for completion). -b for migration with full copy of disk -i for migration with incremental copy of disk (base image is shared) ETEXI { .name = "migrate_cancel", .args_type = "", .params = "", .help = "cancel the current VM migration", .mhandler.cmd = hmp_migrate_cancel, }, STEXI @item migrate_cancel @findex migrate_cancel Cancel the current VM migration. ETEXI { .name = "migrate_set_cache_size", .args_type = "value:o", .params = "value", .help = "set cache size (in bytes) for XBZRLE migrations," "the cache size will be rounded down to the nearest " "power of 2.\n" "The cache size affects the number of cache misses." "In case of a high cache miss ratio you need to increase" " the cache size", .mhandler.cmd = hmp_migrate_set_cache_size, }, STEXI @item migrate_set_cache_size @var{value} @findex migrate_set_cache_size Set cache size to @var{value} (in bytes) for xbzrle migrations. ETEXI { .name = "migrate_set_speed", .args_type = "value:o", .params = "value", .help = "set maximum speed (in bytes) for migrations. " "Defaults to MB if no size suffix is specified, ie. B/K/M/G/T", .mhandler.cmd = hmp_migrate_set_speed, }, STEXI @item migrate_set_speed @var{value} @findex migrate_set_speed Set maximum speed to @var{value} (in bytes) for migrations. ETEXI { .name = "migrate_set_downtime", .args_type = "value:T", .params = "value", .help = "set maximum tolerated downtime (in seconds) for migrations", .mhandler.cmd = hmp_migrate_set_downtime, }, STEXI @item migrate_set_downtime @var{second} @findex migrate_set_downtime Set maximum tolerated downtime (in seconds) for migration. ETEXI { .name = "migrate_set_capability", .args_type = "capability:s,state:b", .params = "capability state", .help = "Enable/Disable the usage of a capability for migration", .mhandler.cmd = hmp_migrate_set_capability, }, STEXI @item migrate_set_capability @var{capability} @var{state} @findex migrate_set_capability Enable/Disable the usage of a capability @var{capability} for migration. ETEXI { .name = "client_migrate_info", .args_type = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?", .params = "protocol hostname port tls-port cert-subject", .help = "send migration info to spice/vnc client", .user_print = monitor_user_noop, .mhandler.cmd_async = client_migrate_info, .flags = MONITOR_CMD_ASYNC, }, STEXI @item client_migrate_info @var{protocol} @var{hostname} @var{port} @var{tls-port} @var{cert-subject} @findex client_migrate_info Set the spice/vnc connection info for the migration target. The spice/vnc server will ask the spice/vnc client to automatically reconnect using the new parameters (if specified) once the vm migration finished successfully. ETEXI { .name = "dump-guest-memory", .args_type = "paging:-p,filename:F,begin:i?,length:i?", .params = "[-p] filename [begin] [length]", .help = "dump guest memory to file" "\n\t\t\t begin(optional): the starting physical address" "\n\t\t\t length(optional): the memory size, in bytes", .mhandler.cmd = hmp_dump_guest_memory, }, STEXI @item dump-guest-memory [-p] @var{protocol} @var{begin} @var{length} @findex dump-guest-memory Dump guest memory to @var{protocol}. The file can be processed with crash or gdb. filename: dump file name paging: do paging to get guest's memory mapping begin: the starting physical address. It's optional, and should be specified with length together. length: the memory size, in bytes. It's optional, and should be specified with begin together. ETEXI { .name = "snapshot_blkdev", .args_type = "reuse:-n,device:B,snapshot-file:s?,format:s?", .params = "[-n] device [new-image-file] [format]", .help = "initiates a live snapshot\n\t\t\t" "of device. If a new image file is specified, the\n\t\t\t" "new image file will become the new root image.\n\t\t\t" "If format is specified, the snapshot file will\n\t\t\t" "be created in that format.\n\t\t\t" "The default format is qcow2. The -n flag requests QEMU\n\t\t\t" "to reuse the image found in new-image-file, instead of\n\t\t\t" "recreating it from scratch.", .mhandler.cmd = hmp_snapshot_blkdev, }, STEXI @item snapshot_blkdev @findex snapshot_blkdev Snapshot device, using snapshot file as target if provided ETEXI { .name = "snapshot_blkdev_internal", .args_type = "device:B,name:s", .params = "device name", .help = "take an internal snapshot of device.\n\t\t\t" "The format of the image used by device must\n\t\t\t" "support it, such as qcow2.\n\t\t\t", .mhandler.cmd = hmp_snapshot_blkdev_internal, }, STEXI @item snapshot_blkdev_internal @findex snapshot_blkdev_internal Take an internal snapshot on device if it support ETEXI { .name = "snapshot_delete_blkdev_internal", .args_type = "device:B,name:s,id:s?", .params = "device name [id]", .help = "delete an internal snapshot of device.\n\t\t\t" "If id is specified, qemu will try delete\n\t\t\t" "the snapshot matching both id and name.\n\t\t\t" "The format of the image used by device must\n\t\t\t" "support it, such as qcow2.\n\t\t\t", .mhandler.cmd = hmp_snapshot_delete_blkdev_internal, }, STEXI @item snapshot_delete_blkdev_internal @findex snapshot_delete_blkdev_internal Delete an internal snapshot on device if it support ETEXI { .name = "drive_mirror", .args_type = "reuse:-n,full:-f,device:B,target:s,format:s?", .params = "[-n] [-f] device target [format]", .help = "initiates live storage\n\t\t\t" "migration for a device. The device's contents are\n\t\t\t" "copied to the new image file, including data that\n\t\t\t" "is written after the command is started.\n\t\t\t" "The -n flag requests QEMU to reuse the image found\n\t\t\t" "in new-image-file, instead of recreating it from scratch.\n\t\t\t" "The -f flag requests QEMU to copy the whole disk,\n\t\t\t" "so that the result does not need a backing file.\n\t\t\t", .mhandler.cmd = hmp_drive_mirror, }, STEXI @item drive_mirror @findex drive_mirror Start mirroring a block device's writes to a new destination, using the specified target. ETEXI { .name = "drive_backup", .args_type = "reuse:-n,full:-f,device:B,target:s,format:s?", .params = "[-n] [-f] device target [format]", .help = "initiates a point-in-time\n\t\t\t" "copy for a device. The device's contents are\n\t\t\t" "copied to the new image file, excluding data that\n\t\t\t" "is written after the command is started.\n\t\t\t" "The -n flag requests QEMU to reuse the image found\n\t\t\t" "in new-image-file, instead of recreating it from scratch.\n\t\t\t" "The -f flag requests QEMU to copy the whole disk,\n\t\t\t" "so that the result does not need a backing file.\n\t\t\t", .mhandler.cmd = hmp_drive_backup, }, STEXI @item drive_backup @findex drive_backup Start a point-in-time copy of a block device to a specificed target. ETEXI { .name = "drive_add", .args_type = "pci_addr:s,opts:s", .params = "[[<domain>:]<bus>:]<slot>\n" "[file=file][,if=type][,bus=n]\n" "[,unit=m][,media=d][,index=i]\n" "[,cyls=c,heads=h,secs=s[,trans=t]]\n" "[,snapshot=on|off][,cache=on|off]\n" "[,readonly=on|off][,copy-on-read=on|off]", .help = "add drive to PCI storage controller", .mhandler.cmd = drive_hot_add, }, STEXI @item drive_add @findex drive_add Add drive to PCI storage controller. ETEXI #if defined(CONFIG_PCI_HOTPLUG_OLD) { .name = "pci_add", .args_type = "pci_addr:s,type:s,opts:s?", .params = "auto|[[<domain>:]<bus>:]<slot> nic|storage [[vlan=n][,macaddr=addr][,model=type]] [file=file][,if=type][,bus=nr]...", .help = "hot-add PCI device", .mhandler.cmd = pci_device_hot_add, }, #endif STEXI @item pci_add @findex pci_add Hot-add PCI device. ETEXI #if defined(CONFIG_PCI_HOTPLUG_OLD) { .name = "pci_del", .args_type = "pci_addr:s", .params = "[[<domain>:]<bus>:]<slot>", .help = "hot remove PCI device", .mhandler.cmd = do_pci_device_hot_remove, }, #endif STEXI @item pci_del @findex pci_del Hot remove PCI device. ETEXI { .name = "pcie_aer_inject_error", .args_type = "advisory_non_fatal:-a,correctable:-c," "id:s,error_status:s," "header0:i?,header1:i?,header2:i?,header3:i?," "prefix0:i?,prefix1:i?,prefix2:i?,prefix3:i?", .params = "[-a] [-c] id " "<error_status> [<tlp header> [<tlp header prefix>]]", .help = "inject pcie aer error\n\t\t\t" " -a for advisory non fatal error\n\t\t\t" " -c for correctable error\n\t\t\t" "<id> = qdev device id\n\t\t\t" "<error_status> = error string or 32bit\n\t\t\t" "<tlb header> = 32bit x 4\n\t\t\t" "<tlb header prefix> = 32bit x 4", .user_print = pcie_aer_inject_error_print, .mhandler.cmd_new = do_pcie_aer_inject_error, }, STEXI @item pcie_aer_inject_error @findex pcie_aer_inject_error Inject PCIe AER error ETEXI { .name = "host_net_add", .args_type = "device:s,opts:s?", .params = "tap|user|socket|vde|netmap|dump [options]", .help = "add host VLAN client", .mhandler.cmd = net_host_device_add, }, STEXI @item host_net_add @findex host_net_add Add host VLAN client. ETEXI { .name = "host_net_remove", .args_type = "vlan_id:i,device:s", .params = "vlan_id name", .help = "remove host VLAN client", .mhandler.cmd = net_host_device_remove, }, STEXI @item host_net_remove @findex host_net_remove Remove host VLAN client. ETEXI { .name = "netdev_add", .args_type = "netdev:O", .params = "[user|tap|socket|hubport|netmap],id=str[,prop=value][,...]", .help = "add host network device", .mhandler.cmd = hmp_netdev_add, }, STEXI @item netdev_add @findex netdev_add Add host network device. ETEXI { .name = "netdev_del", .args_type = "id:s", .params = "id", .help = "remove host network device", .mhandler.cmd = hmp_netdev_del, }, STEXI @item netdev_del @findex netdev_del Remove host network device. ETEXI { .name = "object_add", .args_type = "object:O", .params = "[qom-type=]type,id=str[,prop=value][,...]", .help = "create QOM object", .mhandler.cmd = hmp_object_add, }, STEXI @item object_add @findex object_add Create QOM object. ETEXI { .name = "object_del", .args_type = "id:s", .params = "id", .help = "destroy QOM object", .mhandler.cmd = hmp_object_del, }, STEXI @item object_del @findex object_del Destroy QOM object. ETEXI #ifdef CONFIG_SLIRP { .name = "hostfwd_add", .args_type = "arg1:s,arg2:s?,arg3:s?", .params = "[vlan_id name] [tcp|udp]:[hostaddr]:hostport-[guestaddr]:guestport", .help = "redirect TCP or UDP connections from host to guest (requires -net user)", .mhandler.cmd = net_slirp_hostfwd_add, }, #endif STEXI @item hostfwd_add @findex hostfwd_add Redirect TCP or UDP connections from host to guest (requires -net user). ETEXI #ifdef CONFIG_SLIRP { .name = "hostfwd_remove", .args_type = "arg1:s,arg2:s?,arg3:s?", .params = "[vlan_id name] [tcp|udp]:[hostaddr]:hostport", .help = "remove host-to-guest TCP or UDP redirection", .mhandler.cmd = net_slirp_hostfwd_remove, }, #endif STEXI @item hostfwd_remove @findex hostfwd_remove Remove host-to-guest TCP or UDP redirection. ETEXI { .name = "balloon", .args_type = "value:M", .params = "target", .help = "request VM to change its memory allocation (in MB)", .mhandler.cmd = hmp_balloon, }, STEXI @item balloon @var{value} @findex balloon Request VM to change its memory allocation to @var{value} (in MB). ETEXI { .name = "set_link", .args_type = "name:s,up:b", .params = "name on|off", .help = "change the link status of a network adapter", .mhandler.cmd = hmp_set_link, }, STEXI @item set_link @var{name} [on|off] @findex set_link Switch link @var{name} on (i.e. up) or off (i.e. down). ETEXI { .name = "watchdog_action", .args_type = "action:s", .params = "[reset|shutdown|poweroff|pause|debug|none]", .help = "change watchdog action", .mhandler.cmd = do_watchdog_action, }, STEXI @item watchdog_action @findex watchdog_action Change watchdog action. ETEXI { .name = "acl_show", .args_type = "aclname:s", .params = "aclname", .help = "list rules in the access control list", .mhandler.cmd = do_acl_show, }, STEXI @item acl_show @var{aclname} @findex acl_show List all the matching rules in the access control list, and the default policy. There are currently two named access control lists, @var{vnc.x509dname} and @var{vnc.username} matching on the x509 client certificate distinguished name, and SASL username respectively. ETEXI { .name = "acl_policy", .args_type = "aclname:s,policy:s", .params = "aclname allow|deny", .help = "set default access control list policy", .mhandler.cmd = do_acl_policy, }, STEXI @item acl_policy @var{aclname} @code{allow|deny} @findex acl_policy Set the default access control list policy, used in the event that none of the explicit rules match. The default policy at startup is always @code{deny}. ETEXI { .name = "acl_add", .args_type = "aclname:s,match:s,policy:s,index:i?", .params = "aclname match allow|deny [index]", .help = "add a match rule to the access control list", .mhandler.cmd = do_acl_add, }, STEXI @item acl_add @var{aclname} @var{match} @code{allow|deny} [@var{index}] @findex acl_add Add a match rule to the access control list, allowing or denying access. The match will normally be an exact username or x509 distinguished name, but can optionally include wildcard globs. eg @code{*@@EXAMPLE.COM} to allow all users in the @code{EXAMPLE.COM} kerberos realm. The match will normally be appended to the end of the ACL, but can be inserted earlier in the list if the optional @var{index} parameter is supplied. ETEXI { .name = "acl_remove", .args_type = "aclname:s,match:s", .params = "aclname match", .help = "remove a match rule from the access control list", .mhandler.cmd = do_acl_remove, }, STEXI @item acl_remove @var{aclname} @var{match} @findex acl_remove Remove the specified match rule from the access control list. ETEXI { .name = "acl_reset", .args_type = "aclname:s", .params = "aclname", .help = "reset the access control list", .mhandler.cmd = do_acl_reset, }, STEXI @item acl_reset @var{aclname} @findex acl_reset Remove all matches from the access control list, and set the default policy back to @code{deny}. ETEXI { .name = "nbd_server_start", .args_type = "all:-a,writable:-w,uri:s", .params = "nbd_server_start [-a] [-w] host:port", .help = "serve block devices on the given host and port", .mhandler.cmd = hmp_nbd_server_start, }, STEXI @item nbd_server_start @var{host}:@var{port} @findex nbd_server_start Start an NBD server on the given host and/or port. If the @option{-a} option is included, all of the virtual machine's block devices that have an inserted media on them are automatically exported; in this case, the @option{-w} option makes the devices writable too. ETEXI { .name = "nbd_server_add", .args_type = "writable:-w,device:B", .params = "nbd_server_add [-w] device", .help = "export a block device via NBD", .mhandler.cmd = hmp_nbd_server_add, }, STEXI @item nbd_server_add @var{device} @findex nbd_server_add Export a block device through QEMU's NBD server, which must be started beforehand with @command{nbd_server_start}. The @option{-w} option makes the exported device writable too. ETEXI { .name = "nbd_server_stop", .args_type = "", .params = "nbd_server_stop", .help = "stop serving block devices using the NBD protocol", .mhandler.cmd = hmp_nbd_server_stop, }, STEXI @item nbd_server_stop @findex nbd_server_stop Stop the QEMU embedded NBD server. ETEXI #if defined(TARGET_I386) { .name = "mce", .args_type = "broadcast:-b,cpu_index:i,bank:i,status:l,mcg_status:l,addr:l,misc:l", .params = "[-b] cpu bank status mcgstatus addr misc", .help = "inject a MCE on the given CPU [and broadcast to other CPUs with -b option]", .mhandler.cmd = do_inject_mce, }, #endif STEXI @item mce @var{cpu} @var{bank} @var{status} @var{mcgstatus} @var{addr} @var{misc} @findex mce (x86) Inject an MCE on the given CPU (x86 only). ETEXI { .name = "getfd", .args_type = "fdname:s", .params = "getfd name", .help = "receive a file descriptor via SCM rights and assign it a name", .mhandler.cmd = hmp_getfd, }, STEXI @item getfd @var{fdname} @findex getfd If a file descriptor is passed alongside this command using the SCM_RIGHTS mechanism on unix sockets, it is stored using the name @var{fdname} for later use by other monitor commands. ETEXI { .name = "closefd", .args_type = "fdname:s", .params = "closefd name", .help = "close a file descriptor previously passed via SCM rights", .mhandler.cmd = hmp_closefd, }, STEXI @item closefd @var{fdname} @findex closefd Close the file descriptor previously assigned to @var{fdname} using the @code{getfd} command. This is only needed if the file descriptor was never used by another monitor command. ETEXI { .name = "block_passwd", .args_type = "device:B,password:s", .params = "block_passwd device password", .help = "set the password of encrypted block devices", .mhandler.cmd = hmp_block_passwd, }, STEXI @item block_set_io_throttle @var{device} @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr} @findex block_set_io_throttle Change I/O throttle limits for a block drive to @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr} ETEXI { .name = "block_set_io_throttle", .args_type = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l", .params = "device bps bps_rd bps_wr iops iops_rd iops_wr", .help = "change I/O throttle limits for a block drive", .mhandler.cmd = hmp_block_set_io_throttle, }, STEXI @item block_passwd @var{device} @var{password} @findex block_passwd Set the encrypted device @var{device} password to @var{password} ETEXI { .name = "set_password", .args_type = "protocol:s,password:s,connected:s?", .params = "protocol password action-if-connected", .help = "set spice/vnc password", .mhandler.cmd = hmp_set_password, }, STEXI @item set_password [ vnc | spice ] password [ action-if-connected ] @findex set_password Change spice/vnc password. Use zero to make the password stay valid forever. @var{action-if-connected} specifies what should happen in case a connection is established: @var{fail} makes the password change fail. @var{disconnect} changes the password and disconnects the client. @var{keep} changes the password and keeps the connection up. @var{keep} is the default. ETEXI { .name = "expire_password", .args_type = "protocol:s,time:s", .params = "protocol time", .help = "set spice/vnc password expire-time", .mhandler.cmd = hmp_expire_password, }, STEXI @item expire_password [ vnc | spice ] expire-time @findex expire_password Specify when a password for spice/vnc becomes invalid. @var{expire-time} accepts: @table @var @item now Invalidate password instantly. @item never Password stays valid forever. @item +nsec Password stays valid for @var{nsec} seconds starting now. @item nsec Password is invalidated at the given time. @var{nsec} are the seconds passed since 1970, i.e. unix epoch. @end table ETEXI { .name = "chardev-add", .args_type = "args:s", .params = "args", .help = "add chardev", .mhandler.cmd = hmp_chardev_add, }, STEXI @item chardev_add args @findex chardev_add chardev_add accepts the same parameters as the -chardev command line switch. ETEXI { .name = "chardev-remove", .args_type = "id:s", .params = "id", .help = "remove chardev", .mhandler.cmd = hmp_chardev_remove, }, STEXI @item chardev_remove id @findex chardev_remove Removes the chardev @var{id}. ETEXI { .name = "qemu-io", .args_type = "device:B,command:s", .params = "[device] \"[command]\"", .help = "run a qemu-io command on a block device", .mhandler.cmd = hmp_qemu_io, }, STEXI @item qemu-io @var{device} @var{command} @findex qemu-io Executes a qemu-io command on the given block device. ETEXI { .name = "cpu-add", .args_type = "id:i", .params = "id", .help = "add cpu", .mhandler.cmd = hmp_cpu_add, }, STEXI @item cpu-add @var{id} Add CPU with id @var{id} ETEXI { .name = "info", .args_type = "item:s?", .params = "[subcommand]", .help = "show various information about the system state", .mhandler.cmd = do_info_help, .sub_table = info_cmds, }, STEXI @item info @var{subcommand} @findex info Show various information about the system state. @table @option @item info version show the version of QEMU @item info network show the various VLANs and the associated devices @item info chardev show the character devices @item info block show the block devices @item info blockstats show block device statistics @item info registers show the cpu registers @item info cpus show infos for each CPU @item info history show the command line history @item info irq show the interrupts statistics (if available) @item info pic show i8259 (PIC) state @item info pci show emulated PCI device info @item info tlb show virtual to physical memory mappings (i386, SH4, SPARC, PPC, and Xtensa only) @item info mem show the active virtual memory mappings (i386 only) @item info jit show dynamic compiler info @item info numa show NUMA information @item info kvm show KVM information @item info usb show USB devices plugged on the virtual USB hub @item info usbhost show all USB host devices @item info profile show profiling information @item info capture show information about active capturing @item info snapshots show list of VM snapshots @item info status show the current VM status (running|paused) @item info pcmcia show guest PCMCIA status @item info mice show which guest mouse is receiving events @item info vnc show the vnc server status @item info name show the current VM name @item info uuid show the current VM UUID @item info cpustats show CPU statistics @item info usernet show user network stack connection states @item info migrate show migration status @item info migrate_capabilities show current migration capabilities @item info migrate_cache_size show current migration XBZRLE cache size @item info balloon show balloon information @item info qtree show device tree @item info qdm show qdev device model list @item info roms show roms @item info tpm show the TPM device @end table ETEXI STEXI @item info trace-events show available trace events and their state ETEXI STEXI @end table ETEXI