Vhost-user Protocol =================== Copyright (c) 2014 Virtual Open Systems Sarl. This work is licensed under the terms of the GNU GPL, version 2 or later. See the COPYING file in the top-level directory. =================== This protocol is aiming to complement the ioctl interface used to control the vhost implementation in the Linux kernel. It implements the control plane needed to establish virtqueue sharing with a user space process on the same host. It uses communication over a Unix domain socket to share file descriptors in the ancillary data of the message. The protocol defines 2 sides of the communication, master and slave. Master is the application that shares its virtqueues, in our case QEMU. Slave is the consumer of the virtqueues. In the current implementation QEMU is the Master, and the Slave is intended to be a software Ethernet switch running in user space, such as Snabbswitch. Master and slave can be either a client (i.e. connecting) or server (listening) in the socket communication. Message Specification --------------------- Note that all numbers are in the machine native byte order. A vhost-user message consists of 3 header fields and a payload: ------------------------------------ | request | flags | size | payload | ------------------------------------ * Request: 32-bit type of the request * Flags: 32-bit bit field: - Lower 2 bits are the version (currently 0x01) - Bit 2 is the reply flag - needs to be sent on each reply from the slave * Size - 32-bit size of the payload Depending on the request type, payload can be: * A single 64-bit integer ------- | u64 | ------- u64: a 64-bit unsigned integer * A vring state description --------------- | index | num | --------------- Index: a 32-bit index Num: a 32-bit number * A vring address description -------------------------------------------------------------- | index | flags | size | descriptor | used | available | log | -------------------------------------------------------------- Index: a 32-bit vring index Flags: a 32-bit vring flags Descriptor: a 64-bit user address of the vring descriptor table Used: a 64-bit user address of the vring used ring Available: a 64-bit user address of the vring available ring Log: a 64-bit guest address for logging * Memory regions description --------------------------------------------------- | num regions | padding | region0 | ... | region7 | --------------------------------------------------- Num regions: a 32-bit number of regions Padding: 32-bit A region is: ----------------------------------------------------- | guest address | size | user address | mmap offset | ----------------------------------------------------- Guest address: a 64-bit guest address of the region Size: a 64-bit size User address: a 64-bit user address mmap offset: 64-bit offset where region starts in the mapped memory * Log description --------------------------- | log size | log offset | --------------------------- log size: size of area used for logging log offset: offset from start of supplied file descriptor where logging starts (i.e. where guest address 0 would be logged) In QEMU the vhost-user message is implemented with the following struct: typedef struct VhostUserMsg { VhostUserRequest request; uint32_t flags; uint32_t size; union { uint64_t u64; struct vhost_vring_state state; struct vhost_vring_addr addr; VhostUserMemory memory; VhostUserLog log; }; } QEMU_PACKED VhostUserMsg; Communication ------------- The protocol for vhost-user is based on the existing implementation of vhost for the Linux Kernel. Most messages that can be sent via the Unix domain socket implementing vhost-user have an equivalent ioctl to the kernel implementation. The communication consists of master sending message requests and slave sending message replies. Most of the requests don't require replies. Here is a list of the ones that do: * VHOST_GET_FEATURES * VHOST_GET_PROTOCOL_FEATURES * VHOST_GET_VRING_BASE * VHOST_SET_LOG_BASE (if VHOST_USER_PROTOCOL_F_LOG_SHMFD) There are several messages that the master sends with file descriptors passed in the ancillary data: * VHOST_SET_MEM_TABLE * VHOST_SET_LOG_BASE (if VHOST_USER_PROTOCOL_F_LOG_SHMFD) * VHOST_SET_LOG_FD * VHOST_SET_VRING_KICK * VHOST_SET_VRING_CALL * VHOST_SET_VRING_ERR If Master is unable to send the full message or receives a wrong reply it will close the connection. An optional reconnection mechanism can be implemented. Any protocol extensions are gated by protocol feature bits, which allows full backwards compatibility on both master and slave. As older slaves don't support negotiating protocol features, a feature bit was dedicated for this purpose: #define VHOST_USER_F_PROTOCOL_FEATURES 30 Starting and stopping rings ---------------------- Client must only process each ring when it is started. Client must only pass data between the ring and the backend, when the ring is enabled. If ring is started but disabled, client must process the ring without talking to the backend. For example, for a networking device, in the disabled state client must not supply any new RX packets, but must process and discard any TX packets. If VHOST_USER_F_PROTOCOL_FEATURES has not been negotiated, the ring is initialized in an enabled state. If VHOST_USER_F_PROTOCOL_FEATURES has been negotiated, the ring is initialized in a disabled state. Client must not pass data to/from the backend until ring is enabled by VHOST_USER_SET_VRING_ENABLE with parameter 1, or after it has been disabled by VHOST_USER_SET_VRING_ENABLE with parameter 0. Each ring is initialized in a stopped state, client must not process it until ring is started, or after it has been stopped. Client must start ring upon receiving a kick (that is, detecting that file descriptor is readable) on the descriptor specified by VHOST_USER_SET_VRING_KICK, and stop ring upon receiving VHOST_USER_GET_VRING_BASE. While processing the rings (whether they are enabled or not), client must support changing some configuration aspects on the fly. Multiple queue support ---------------------- Multiple queue is treated as a protocol extension, hence the slave has to implement protocol features first. The multiple queues feature is supported only when the protocol feature VHOST_USER_PROTOCOL_F_MQ (bit 0) is set. The max number of queues the slave supports can be queried with message VHOST_USER_GET_PROTOCOL_FEATURES. Master should stop when the number of requested queues is bigger than that. As all queues share one connection, the master uses a unique index for each queue in the sent message to identify a specified queue. One queue pair is enabled initially. More queues are enabled dynamically, by sending message VHOST_USER_SET_VRING_ENABLE. Migration --------- During live migration, the master may need to track the modifications the slave makes to the memory mapped regions. The client should mark the dirty pages in a log. Once it complies to this logging, it may declare the VHOST_F_LOG_ALL vhost feature. To start/stop logging of data/used ring writes, server may send messages VHOST_USER_SET_FEATURES with VHOST_F_LOG_ALL and VHOST_USER_SET_VRING_ADDR with VHOST_VRING_F_LOG in ring's flags set to 1/0, respectively. All the modifications to memory pointed by vring "descriptor" should be marked. Modifications to "used" vring should be marked if VHOST_VRING_F_LOG is part of ring's flags. Dirty pages are of size: #define VHOST_LOG_PAGE 0x1000 The log memory fd is provided in the ancillary data of VHOST_USER_SET_LOG_BASE message when the slave has VHOST_USER_PROTOCOL_F_LOG_SHMFD protocol feature. The size of the log is supplied as part of VhostUserMsg which should be large enough to cover all known guest addresses. Log starts at the supplied offset in the supplied file descriptor. The log covers from address 0 to the maximum of guest regions. In pseudo-code, to mark page at "addr" as dirty: page = addr / VHOST_LOG_PAGE log[page / 8] |= 1 << page % 8 Where addr is the guest physical address. Use atomic operations, as the log may be concurrently manipulated. Note that when logging modifications to the used ring (when VHOST_VRING_F_LOG is set for this ring), log_guest_addr should be used to calculate the log offset: the write to first byte of the used ring is logged at this offset from log start. Also note that this value might be outside the legal guest physical address range (i.e. does not have to be covered by the VhostUserMemory table), but the bit offset of the last byte of the ring must fall within the size supplied by VhostUserLog. VHOST_USER_SET_LOG_FD is an optional message with an eventfd in ancillary data, it may be used to inform the master that the log has been modified. Once the source has finished migration, rings will be stopped by the source. No further update must be done before rings are restarted. Protocol features ----------------- #define VHOST_USER_PROTOCOL_F_MQ 0 #define VHOST_USER_PROTOCOL_F_LOG_SHMFD 1 #define VHOST_USER_PROTOCOL_F_RARP 2 Message types ------------- * VHOST_USER_GET_FEATURES Id: 1 Equivalent ioctl: VHOST_GET_FEATURES Master payload: N/A Slave payload: u64 Get from the underlying vhost implementation the features bitmask. Feature bit VHOST_USER_F_PROTOCOL_FEATURES signals slave support for VHOST_USER_GET_PROTOCOL_FEATURES and VHOST_USER_SET_PROTOCOL_FEATURES. * VHOST_USER_SET_FEATURES Id: 2 Ioctl: VHOST_SET_FEATURES Master payload: u64 Enable features in the underlying vhost implementation using a bitmask. Feature bit VHOST_USER_F_PROTOCOL_FEATURES signals slave support for VHOST_USER_GET_PROTOCOL_FEATURES and VHOST_USER_SET_PROTOCOL_FEATURES. * VHOST_USER_GET_PROTOCOL_FEATURES Id: 15 Equivalent ioctl: VHOST_GET_FEATURES Master payload: N/A Slave payload: u64 Get the protocol feature bitmask from the underlying vhost implementation. Only legal if feature bit VHOST_USER_F_PROTOCOL_FEATURES is present in VHOST_USER_GET_FEATURES. Note: slave that reported VHOST_USER_F_PROTOCOL_FEATURES must support this message even before VHOST_USER_SET_FEATURES was called. * VHOST_USER_SET_PROTOCOL_FEATURES Id: 16 Ioctl: VHOST_SET_FEATURES Master payload: u64 Enable protocol features in the underlying vhost implementation. Only legal if feature bit VHOST_USER_F_PROTOCOL_FEATURES is present in VHOST_USER_GET_FEATURES. Note: slave that reported VHOST_USER_F_PROTOCOL_FEATURES must support this message even before VHOST_USER_SET_FEATURES was called. * VHOST_USER_SET_OWNER Id: 3 Equivalent ioctl: VHOST_SET_OWNER Master payload: N/A Issued when a new connection is established. It sets the current Master as an owner of the session. This can be used on the Slave as a "session start" flag. * VHOST_USER_RESET_OWNER Id: 4 Master payload: N/A This is no longer used. Used to be sent to request disabling all rings, but some clients interpreted it to also discard connection state (this interpretation would lead to bugs). It is recommended that clients either ignore this message, or use it to disable all rings. * VHOST_USER_SET_MEM_TABLE Id: 5 Equivalent ioctl: VHOST_SET_MEM_TABLE Master payload: memory regions description Sets the memory map regions on the slave so it can translate the vring addresses. In the ancillary data there is an array of file descriptors for each memory mapped region. The size and ordering of the fds matches the number and ordering of memory regions. * VHOST_USER_SET_LOG_BASE Id: 6 Equivalent ioctl: VHOST_SET_LOG_BASE Master payload: u64 Slave payload: N/A Sets logging shared memory space. When slave has VHOST_USER_PROTOCOL_F_LOG_SHMFD protocol feature, the log memory fd is provided in the ancillary data of VHOST_USER_SET_LOG_BASE message, the size and offset of shared memory area provided in the message. * VHOST_USER_SET_LOG_FD Id: 7 Equivalent ioctl: VHOST_SET_LOG_FD Master payload: N/A Sets the logging file descriptor, which is passed as ancillary data. * VHOST_USER_SET_VRING_NUM Id: 8 Equivalent ioctl: VHOST_SET_VRING_NUM Master payload: vring state description Set the size of the queue. * VHOST_USER_SET_VRING_ADDR Id: 9 Equivalent ioctl: VHOST_SET_VRING_ADDR Master payload: vring address description Slave payload: N/A Sets the addresses of the different aspects of the vring. * VHOST_USER_SET_VRING_BASE Id: 10 Equivalent ioctl: VHOST_SET_VRING_BASE Master payload: vring state description Sets the base offset in the available vring. * VHOST_USER_GET_VRING_BASE Id: 11 Equivalent ioctl: VHOST_USER_GET_VRING_BASE Master payload: vring state description Slave payload: vring state description Get the available vring base offset. * VHOST_USER_SET_VRING_KICK Id: 12 Equivalent ioctl: VHOST_SET_VRING_KICK Master payload: u64 Set the event file descriptor for adding buffers to the vring. It is passed in the ancillary data. Bits (0-7) of the payload contain the vring index. Bit 8 is the invalid FD flag. This flag is set when there is no file descriptor in the ancillary data. This signals that polling should be used instead of waiting for a kick. * VHOST_USER_SET_VRING_CALL Id: 13 Equivalent ioctl: VHOST_SET_VRING_CALL Master payload: u64 Set the event file descriptor to signal when buffers are used. It is passed in the ancillary data. Bits (0-7) of the payload contain the vring index. Bit 8 is the invalid FD flag. This flag is set when there is no file descriptor in the ancillary data. This signals that polling will be used instead of waiting for the call. * VHOST_USER_SET_VRING_ERR Id: 14 Equivalent ioctl: VHOST_SET_VRING_ERR Master payload: u64 Set the event file descriptor to signal when error occurs. It is passed in the ancillary data. Bits (0-7) of the payload contain the vring index. Bit 8 is the invalid FD flag. This flag is set when there is no file descriptor in the ancillary data. * VHOST_USER_GET_QUEUE_NUM Id: 17 Equivalent ioctl: N/A Master payload: N/A Slave payload: u64 Query how many queues the backend supports. This request should be sent only when VHOST_USER_PROTOCOL_F_MQ is set in quried protocol features by VHOST_USER_GET_PROTOCOL_FEATURES. * VHOST_USER_SET_VRING_ENABLE Id: 18 Equivalent ioctl: N/A Master payload: vring state description Signal slave to enable or disable corresponding vring. This request should be sent only when VHOST_USER_F_PROTOCOL_FEATURES has been negotiated. * VHOST_USER_SEND_RARP Id: 19 Equivalent ioctl: N/A Master payload: u64 Ask vhost user backend to broadcast a fake RARP to notify the migration is terminated for guest that does not support GUEST_ANNOUNCE. Only legal if feature bit VHOST_USER_F_PROTOCOL_FEATURES is present in VHOST_USER_GET_FEATURES and protocol feature bit VHOST_USER_PROTOCOL_F_RARP is present in VHOST_USER_GET_PROTOCOL_FEATURES. The first 6 bytes of the payload contain the mac address of the guest to allow the vhost user backend to construct and broadcast the fake RARP.