#ifndef QEMU_H #define QEMU_H #include <signal.h> #include <string.h> #include "cpu.h" #undef DEBUG_REMAP #ifdef DEBUG_REMAP #include <stdlib.h> #endif /* DEBUG_REMAP */ #include "qemu-types.h" enum BSDType { target_freebsd, target_netbsd, target_openbsd, }; extern enum BSDType bsd_type; #include "syscall_defs.h" #include "syscall.h" #include "target_signal.h" #include "gdbstub.h" #if defined(CONFIG_USE_NPTL) #define THREAD __thread #else #define THREAD #endif /* This struct is used to hold certain information about the image. * Basically, it replicates in user space what would be certain * task_struct fields in the kernel */ struct image_info { abi_ulong load_addr; abi_ulong start_code; abi_ulong end_code; abi_ulong start_data; abi_ulong end_data; abi_ulong start_brk; abi_ulong brk; abi_ulong start_mmap; abi_ulong mmap; abi_ulong rss; abi_ulong start_stack; abi_ulong entry; abi_ulong code_offset; abi_ulong data_offset; int personality; }; #define MAX_SIGQUEUE_SIZE 1024 struct sigqueue { struct sigqueue *next; //target_siginfo_t info; }; struct emulated_sigtable { int pending; /* true if signal is pending */ struct sigqueue *first; struct sigqueue info; /* in order to always have memory for the first signal, we put it here */ }; /* NOTE: we force a big alignment so that the stack stored after is aligned too */ typedef struct TaskState { struct TaskState *next; int used; /* non zero if used */ struct image_info *info; struct emulated_sigtable sigtab[TARGET_NSIG]; struct sigqueue sigqueue_table[MAX_SIGQUEUE_SIZE]; /* siginfo queue */ struct sigqueue *first_free; /* first free siginfo queue entry */ int signal_pending; /* non zero if a signal may be pending */ uint8_t stack[0]; } __attribute__((aligned(16))) TaskState; void init_task_state(TaskState *ts); extern const char *qemu_uname_release; #if defined(CONFIG_USE_GUEST_BASE) extern unsigned long mmap_min_addr; #endif /* ??? See if we can avoid exposing so much of the loader internals. */ /* * MAX_ARG_PAGES defines the number of pages allocated for arguments * and envelope for the new program. 32 should suffice, this gives * a maximum env+arg of 128kB w/4KB pages! */ #define MAX_ARG_PAGES 32 /* * This structure is used to hold the arguments that are * used when loading binaries. */ struct linux_binprm { char buf[128]; void *page[MAX_ARG_PAGES]; abi_ulong p; int fd; int e_uid, e_gid; int argc, envc; char **argv; char **envp; char * filename; /* Name of binary */ }; void do_init_thread(struct target_pt_regs *regs, struct image_info *infop); abi_ulong loader_build_argptr(int envc, int argc, abi_ulong sp, abi_ulong stringp, int push_ptr); int loader_exec(const char * filename, char ** argv, char ** envp, struct target_pt_regs * regs, struct image_info *infop); int load_elf_binary(struct linux_binprm * bprm, struct target_pt_regs * regs, struct image_info * info); int load_flt_binary(struct linux_binprm * bprm, struct target_pt_regs * regs, struct image_info * info); abi_long memcpy_to_target(abi_ulong dest, const void *src, unsigned long len); void target_set_brk(abi_ulong new_brk); abi_long do_brk(abi_ulong new_brk); void syscall_init(void); abi_long do_freebsd_syscall(void *cpu_env, int num, abi_long arg1, abi_long arg2, abi_long arg3, abi_long arg4, abi_long arg5, abi_long arg6, abi_long arg7, abi_long arg8); abi_long do_netbsd_syscall(void *cpu_env, int num, abi_long arg1, abi_long arg2, abi_long arg3, abi_long arg4, abi_long arg5, abi_long arg6); abi_long do_openbsd_syscall(void *cpu_env, int num, abi_long arg1, abi_long arg2, abi_long arg3, abi_long arg4, abi_long arg5, abi_long arg6); void gemu_log(const char *fmt, ...) GCC_FMT_ATTR(1, 2); extern THREAD CPUState *thread_env; void cpu_loop(CPUState *env); char *target_strerror(int err); int get_osversion(void); void fork_start(void); void fork_end(int child); #include "qemu-log.h" /* strace.c */ void print_freebsd_syscall(int num, abi_long arg1, abi_long arg2, abi_long arg3, abi_long arg4, abi_long arg5, abi_long arg6); void print_freebsd_syscall_ret(int num, abi_long ret); void print_netbsd_syscall(int num, abi_long arg1, abi_long arg2, abi_long arg3, abi_long arg4, abi_long arg5, abi_long arg6); void print_netbsd_syscall_ret(int num, abi_long ret); void print_openbsd_syscall(int num, abi_long arg1, abi_long arg2, abi_long arg3, abi_long arg4, abi_long arg5, abi_long arg6); void print_openbsd_syscall_ret(int num, abi_long ret); extern int do_strace; /* signal.c */ void process_pending_signals(CPUState *cpu_env); void signal_init(void); //int queue_signal(CPUState *env, int sig, target_siginfo_t *info); //void host_to_target_siginfo(target_siginfo_t *tinfo, const siginfo_t *info); //void target_to_host_siginfo(siginfo_t *info, const target_siginfo_t *tinfo); long do_sigreturn(CPUState *env); long do_rt_sigreturn(CPUState *env); abi_long do_sigaltstack(abi_ulong uss_addr, abi_ulong uoss_addr, abi_ulong sp); /* mmap.c */ int target_mprotect(abi_ulong start, abi_ulong len, int prot); abi_long target_mmap(abi_ulong start, abi_ulong len, int prot, int flags, int fd, abi_ulong offset); int target_munmap(abi_ulong start, abi_ulong len); abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size, abi_ulong new_size, unsigned long flags, abi_ulong new_addr); int target_msync(abi_ulong start, abi_ulong len, int flags); extern unsigned long last_brk; void mmap_lock(void); void mmap_unlock(void); void cpu_list_lock(void); void cpu_list_unlock(void); #if defined(CONFIG_USE_NPTL) void mmap_fork_start(void); void mmap_fork_end(int child); #endif /* main.c */ extern unsigned long x86_stack_size; /* user access */ #define VERIFY_READ 0 #define VERIFY_WRITE 1 /* implies read access */ static inline int access_ok(int type, abi_ulong addr, abi_ulong size) { return page_check_range((target_ulong)addr, size, (type == VERIFY_READ) ? PAGE_READ : (PAGE_READ | PAGE_WRITE)) == 0; } /* NOTE __get_user and __put_user use host pointers and don't check access. */ /* These are usually used to access struct data members once the * struct has been locked - usually with lock_user_struct(). */ #define __put_user(x, hptr)\ ({\ int size = sizeof(*hptr);\ switch(size) {\ case 1:\ *(uint8_t *)(hptr) = (uint8_t)(typeof(*hptr))(x);\ break;\ case 2:\ *(uint16_t *)(hptr) = tswap16((typeof(*hptr))(x));\ break;\ case 4:\ *(uint32_t *)(hptr) = tswap32((typeof(*hptr))(x));\ break;\ case 8:\ *(uint64_t *)(hptr) = tswap64((typeof(*hptr))(x));\ break;\ default:\ abort();\ }\ 0;\ }) #define __get_user(x, hptr) \ ({\ int size = sizeof(*hptr);\ switch(size) {\ case 1:\ x = (typeof(*hptr))*(uint8_t *)(hptr);\ break;\ case 2:\ x = (typeof(*hptr))tswap16(*(uint16_t *)(hptr));\ break;\ case 4:\ x = (typeof(*hptr))tswap32(*(uint32_t *)(hptr));\ break;\ case 8:\ x = (typeof(*hptr))tswap64(*(uint64_t *)(hptr));\ break;\ default:\ /* avoid warning */\ x = 0;\ abort();\ }\ 0;\ }) /* put_user()/get_user() take a guest address and check access */ /* These are usually used to access an atomic data type, such as an int, * that has been passed by address. These internally perform locking * and unlocking on the data type. */ #define put_user(x, gaddr, target_type) \ ({ \ abi_ulong __gaddr = (gaddr); \ target_type *__hptr; \ abi_long __ret; \ if ((__hptr = lock_user(VERIFY_WRITE, __gaddr, sizeof(target_type), 0))) { \ __ret = __put_user((x), __hptr); \ unlock_user(__hptr, __gaddr, sizeof(target_type)); \ } else \ __ret = -TARGET_EFAULT; \ __ret; \ }) #define get_user(x, gaddr, target_type) \ ({ \ abi_ulong __gaddr = (gaddr); \ target_type *__hptr; \ abi_long __ret; \ if ((__hptr = lock_user(VERIFY_READ, __gaddr, sizeof(target_type), 1))) { \ __ret = __get_user((x), __hptr); \ unlock_user(__hptr, __gaddr, 0); \ } else { \ /* avoid warning */ \ (x) = 0; \ __ret = -TARGET_EFAULT; \ } \ __ret; \ }) #define put_user_ual(x, gaddr) put_user((x), (gaddr), abi_ulong) #define put_user_sal(x, gaddr) put_user((x), (gaddr), abi_long) #define put_user_u64(x, gaddr) put_user((x), (gaddr), uint64_t) #define put_user_s64(x, gaddr) put_user((x), (gaddr), int64_t) #define put_user_u32(x, gaddr) put_user((x), (gaddr), uint32_t) #define put_user_s32(x, gaddr) put_user((x), (gaddr), int32_t) #define put_user_u16(x, gaddr) put_user((x), (gaddr), uint16_t) #define put_user_s16(x, gaddr) put_user((x), (gaddr), int16_t) #define put_user_u8(x, gaddr) put_user((x), (gaddr), uint8_t) #define put_user_s8(x, gaddr) put_user((x), (gaddr), int8_t) #define get_user_ual(x, gaddr) get_user((x), (gaddr), abi_ulong) #define get_user_sal(x, gaddr) get_user((x), (gaddr), abi_long) #define get_user_u64(x, gaddr) get_user((x), (gaddr), uint64_t) #define get_user_s64(x, gaddr) get_user((x), (gaddr), int64_t) #define get_user_u32(x, gaddr) get_user((x), (gaddr), uint32_t) #define get_user_s32(x, gaddr) get_user((x), (gaddr), int32_t) #define get_user_u16(x, gaddr) get_user((x), (gaddr), uint16_t) #define get_user_s16(x, gaddr) get_user((x), (gaddr), int16_t) #define get_user_u8(x, gaddr) get_user((x), (gaddr), uint8_t) #define get_user_s8(x, gaddr) get_user((x), (gaddr), int8_t) /* copy_from_user() and copy_to_user() are usually used to copy data * buffers between the target and host. These internally perform * locking/unlocking of the memory. */ abi_long copy_from_user(void *hptr, abi_ulong gaddr, size_t len); abi_long copy_to_user(abi_ulong gaddr, void *hptr, size_t len); /* Functions for accessing guest memory. The tget and tput functions read/write single values, byteswapping as necessary. The lock_user gets a pointer to a contiguous area of guest memory, but does not perform and byteswapping. lock_user may return either a pointer to the guest memory, or a temporary buffer. */ /* Lock an area of guest memory into the host. If copy is true then the host area will have the same contents as the guest. */ static inline void *lock_user(int type, abi_ulong guest_addr, long len, int copy) { if (!access_ok(type, guest_addr, len)) return NULL; #ifdef DEBUG_REMAP { void *addr; addr = malloc(len); if (copy) memcpy(addr, g2h(guest_addr), len); else memset(addr, 0, len); return addr; } #else return g2h(guest_addr); #endif } /* Unlock an area of guest memory. The first LEN bytes must be flushed back to guest memory. host_ptr = NULL is explicitly allowed and does nothing. */ static inline void unlock_user(void *host_ptr, abi_ulong guest_addr, long len) { #ifdef DEBUG_REMAP if (!host_ptr) return; if (host_ptr == g2h(guest_addr)) return; if (len > 0) memcpy(g2h(guest_addr), host_ptr, len); free(host_ptr); #endif } /* Return the length of a string in target memory or -TARGET_EFAULT if access error. */ abi_long target_strlen(abi_ulong gaddr); /* Like lock_user but for null terminated strings. */ static inline void *lock_user_string(abi_ulong guest_addr) { abi_long len; len = target_strlen(guest_addr); if (len < 0) return NULL; return lock_user(VERIFY_READ, guest_addr, (long)(len + 1), 1); } /* Helper macros for locking/ulocking a target struct. */ #define lock_user_struct(type, host_ptr, guest_addr, copy) \ (host_ptr = lock_user(type, guest_addr, sizeof(*host_ptr), copy)) #define unlock_user_struct(host_ptr, guest_addr, copy) \ unlock_user(host_ptr, guest_addr, (copy) ? sizeof(*host_ptr) : 0) #if defined(CONFIG_USE_NPTL) #include <pthread.h> #endif #endif /* QEMU_H */