From c3a9a689c6ff07ba2e00bafc68626fad84587794 Mon Sep 17 00:00:00 2001 From: Peter Crosthwaite Date: Tue, 3 Nov 2015 13:49:41 +0000 Subject: arm: xilinx_zynq: Add linux pre-boot Add a Linux-specific pre-boot routine that matches the device- specific bootloaders behaviour. This is needed for modern Linux that expects the ARM PLL in SLCR to be a more even value (not 26). Cc: Alistair Francis Signed-off-by: Peter Crosthwaite Message-id: 9a9025ea65572586b50dca4e5819032e3c436d64.1446182614.git.crosthwaite.peter@gmail.com Reviewed-by: Peter Maydell Signed-off-by: Peter Maydell --- hw/arm/xilinx_zynq.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) (limited to 'hw') diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index 9f89483d6a..82a9db8120 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -43,6 +43,45 @@ static const int dma_irqs[8] = { 46, 47, 48, 49, 72, 73, 74, 75 }; +#define BOARD_SETUP_ADDR 0x100 + +#define SLCR_LOCK_OFFSET 0x004 +#define SLCR_UNLOCK_OFFSET 0x008 +#define SLCR_ARM_PLL_OFFSET 0x100 + +#define SLCR_XILINX_UNLOCK_KEY 0xdf0d +#define SLCR_XILINX_LOCK_KEY 0x767b + +#define ARMV7_IMM16(x) (extract32((x), 0, 12) | \ + extract32((x), 12, 4) << 16) + +/* Write immediate val to address r0 + addr. r0 should contain base offset + * of the SLCR block. Clobbers r1. + */ + +#define SLCR_WRITE(addr, val) \ + 0xe3001000 + ARMV7_IMM16(extract32((val), 0, 16)), /* movw r1 ... */ \ + 0xe3401000 + ARMV7_IMM16(extract32((val), 16, 16)), /* movt r1 ... */ \ + 0xe5801000 + (addr) + +static void zynq_write_board_setup(ARMCPU *cpu, + const struct arm_boot_info *info) +{ + int n; + uint32_t board_setup_blob[] = { + 0xe3a004f8, /* mov r0, #0xf8000000 */ + SLCR_WRITE(SLCR_UNLOCK_OFFSET, SLCR_XILINX_UNLOCK_KEY), + SLCR_WRITE(SLCR_ARM_PLL_OFFSET, 0x00014008), + SLCR_WRITE(SLCR_LOCK_OFFSET, SLCR_XILINX_LOCK_KEY), + 0xe12fff1e, /* bx lr */ + }; + for (n = 0; n < ARRAY_SIZE(board_setup_blob); n++) { + board_setup_blob[n] = tswap32(board_setup_blob[n]); + } + rom_add_blob_fixed("board-setup", board_setup_blob, + sizeof(board_setup_blob), BOARD_SETUP_ADDR); +} + static struct arm_boot_info zynq_binfo = {}; static void gem_init(NICInfo *nd, uint32_t base, qemu_irq irq) @@ -252,6 +291,9 @@ static void zynq_init(MachineState *machine) zynq_binfo.nb_cpus = 1; zynq_binfo.board_id = 0xd32; zynq_binfo.loader_start = 0; + zynq_binfo.board_setup_addr = BOARD_SETUP_ADDR; + zynq_binfo.write_board_setup = zynq_write_board_setup; + arm_load_kernel(ARM_CPU(first_cpu), &zynq_binfo); } -- cgit v1.2.3