From 336a6915bc7089fb20fea4ba99972ad9a97c5f52 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Tue, 25 Oct 2011 12:53:37 +0200 Subject: scsi-disk: add scsi-block for device passthrough scsi-block is a new device that supports device passthrough of Linux block devices (i.e. /dev/sda, not /dev/sg0). It uses SG_IO for commands other than I/O commands, and regular AIO read/writes for I/O commands. Besides being simpler to configure (no mapping required to scsi-generic device names), this removes the need for a large bounce buffer and, in the future, will get scatter/gather support for free from scsi-disk. Signed-off-by: Paolo Bonzini Signed-off-by: Kevin Wolf --- hw/scsi-disk.c | 118 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 118 insertions(+) (limited to 'hw/scsi-disk.c') diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c index 352d41fc2b..1c04872af7 100644 --- a/hw/scsi-disk.c +++ b/hw/scsi-disk.c @@ -39,6 +39,10 @@ do { fprintf(stderr, "scsi-disk: " fmt , ## __VA_ARGS__); } while (0) #include "blockdev.h" #include "block_int.h" +#ifdef __linux +#include +#endif + #define SCSI_DMA_BUF_SIZE 131072 #define SCSI_MAX_INQUIRY_LEN 256 @@ -1588,6 +1592,105 @@ static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun, return req; } +#ifdef __linux__ +static int get_device_type(SCSIDiskState *s) +{ + BlockDriverState *bdrv = s->qdev.conf.bs; + uint8_t cmd[16]; + uint8_t buf[36]; + uint8_t sensebuf[8]; + sg_io_hdr_t io_header; + int ret; + + memset(cmd, 0, sizeof(cmd)); + memset(buf, 0, sizeof(buf)); + cmd[0] = INQUIRY; + cmd[4] = sizeof(buf); + + memset(&io_header, 0, sizeof(io_header)); + io_header.interface_id = 'S'; + io_header.dxfer_direction = SG_DXFER_FROM_DEV; + io_header.dxfer_len = sizeof(buf); + io_header.dxferp = buf; + io_header.cmdp = cmd; + io_header.cmd_len = sizeof(cmd); + io_header.mx_sb_len = sizeof(sensebuf); + io_header.sbp = sensebuf; + io_header.timeout = 6000; /* XXX */ + + ret = bdrv_ioctl(bdrv, SG_IO, &io_header); + if (ret < 0 || io_header.driver_status || io_header.host_status) { + return -1; + } + s->qdev.type = buf[0]; + s->removable = (buf[1] & 0x80) != 0; + return 0; +} + +static int scsi_block_initfn(SCSIDevice *dev) +{ + SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev); + int sg_version; + int rc; + + if (!s->qdev.conf.bs) { + error_report("scsi-block: drive property not set"); + return -1; + } + + /* check we are using a driver managing SG_IO (version 3 and after) */ + if (bdrv_ioctl(s->qdev.conf.bs, SG_GET_VERSION_NUM, &sg_version) < 0 || + sg_version < 30000) { + error_report("scsi-block: scsi generic interface too old"); + return -1; + } + + /* get device type from INQUIRY data */ + rc = get_device_type(s); + if (rc < 0) { + error_report("scsi-block: INQUIRY failed"); + return -1; + } + + /* Make a guess for the block size, we'll fix it when the guest sends. + * READ CAPACITY. If they don't, they likely would assume these sizes + * anyway. (TODO: check in /sys). + */ + if (s->qdev.type == TYPE_ROM || s->qdev.type == TYPE_WORM) { + s->qdev.blocksize = 2048; + } else { + s->qdev.blocksize = 512; + } + return scsi_initfn(&s->qdev); +} + +static SCSIRequest *scsi_block_new_request(SCSIDevice *d, uint32_t tag, + uint32_t lun, uint8_t *buf, + void *hba_private) +{ + SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d); + + switch (buf[0]) { + case READ_6: + case READ_10: + case READ_12: + case READ_16: + case WRITE_6: + case WRITE_10: + case WRITE_12: + case WRITE_16: + case WRITE_VERIFY_10: + case WRITE_VERIFY_12: + case WRITE_VERIFY_16: + return scsi_req_alloc(&scsi_disk_reqops, &s->qdev, tag, lun, + hba_private); + } + + return scsi_req_alloc(&scsi_generic_req_ops, &s->qdev, tag, lun, + hba_private); +} +#endif + #define DEFINE_SCSI_DISK_PROPERTIES() \ DEFINE_BLOCK_PROPERTIES(SCSIDiskState, qdev.conf), \ DEFINE_PROP_STRING("ver", SCSIDiskState, version), \ @@ -1623,6 +1726,21 @@ static SCSIDeviceInfo scsi_disk_info[] = { DEFINE_SCSI_DISK_PROPERTIES(), DEFINE_PROP_END_OF_LIST(), }, +#ifdef __linux__ + },{ + .qdev.name = "scsi-block", + .qdev.fw_name = "disk", + .qdev.desc = "SCSI block device passthrough", + .qdev.size = sizeof(SCSIDiskState), + .qdev.reset = scsi_disk_reset, + .init = scsi_block_initfn, + .destroy = scsi_destroy, + .alloc_req = scsi_block_new_request, + .qdev.props = (Property[]) { + DEFINE_SCSI_DISK_PROPERTIES(), + DEFINE_PROP_END_OF_LIST(), + }, +#endif },{ .qdev.name = "scsi-disk", /* legacy -device scsi-disk */ .qdev.fw_name = "disk", -- cgit v1.2.3