From 37b9ab92f7f8295c61daa4a8893eb8fb1add63e2 Mon Sep 17 00:00:00 2001 From: Laurent Vivier Date: Mon, 24 Aug 2015 19:29:45 +0200 Subject: rtl8139: remove muldiv64() Originally, timers were ticks based, and it made sense to add ticks to current time to know when to trigger an alarm. But since commit: 7447545 change all other clock references to use nanosecond resolution accessors All timers use nanoseconds and we need to convert ticks to nanoseconds, by doing something like: y = muldiv64(x, get_ticks_per_sec(), PCI_FREQUENCY) where x is the number of device ticks and y the number of system ticks. y is used as nanoseconds in timer functions, it works because 1 tick is 1 nanosecond. (get_ticks_per_sec() is 10^9) But as PCI frequency is 33 MHz, we can also do: y = x * 30; /* 33 MHz PCI period is 30 ns */ Which is much more simple. This implies a 33.333333 MHz PCI frequency, but this is correct. Signed-off-by: Laurent Vivier Reviewed-by: Stefan Hajnoczi --- hw/net/rtl8139.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'hw/net') diff --git a/hw/net/rtl8139.c b/hw/net/rtl8139.c index b0d6c40f58..68e43f3d48 100644 --- a/hw/net/rtl8139.c +++ b/hw/net/rtl8139.c @@ -64,7 +64,7 @@ /* debug RTL8139 card */ //#define DEBUG_RTL8139 1 -#define PCI_FREQUENCY 33000000L +#define PCI_PERIOD 30 /* 30 ns period = 33.333333 Mhz frequency */ #define SET_MASKED(input, mask, curr) \ ( ( (input) & ~(mask) ) | ( (curr) & (mask) ) ) @@ -2834,8 +2834,7 @@ static void rtl8139_io_writew(void *opaque, uint8_t addr, uint32_t val) static void rtl8139_set_next_tctr_time(RTL8139State *s) { - const uint64_t ns_per_period = - muldiv64(0x100000000LL, get_ticks_per_sec(), PCI_FREQUENCY); + const uint64_t ns_per_period = (uint64_t)PCI_PERIOD << 32; DPRINTF("entered rtl8139_set_next_tctr_time\n"); @@ -2853,7 +2852,7 @@ static void rtl8139_set_next_tctr_time(RTL8139State *s) if (!s->TimerInt) { timer_del(s->timer); } else { - uint64_t delta = muldiv64(s->TimerInt, get_ticks_per_sec(), PCI_FREQUENCY); + uint64_t delta = (uint64_t)s->TimerInt * PCI_PERIOD; if (s->TCTR_base + delta <= qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)) { delta += ns_per_period; } @@ -3127,8 +3126,8 @@ static uint32_t rtl8139_io_readl(void *opaque, uint8_t addr) break; case Timer: - ret = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - s->TCTR_base, - PCI_FREQUENCY, get_ticks_per_sec()); + ret = (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - s->TCTR_base) / + PCI_PERIOD; DPRINTF("TCTR Timer read val=0x%08x\n", ret); break; @@ -3222,8 +3221,7 @@ static void rtl8139_pre_save(void *opaque) int64_t current_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); /* for migration to older versions */ - s->TCTR = muldiv64(current_time - s->TCTR_base, PCI_FREQUENCY, - get_ticks_per_sec()); + s->TCTR = (current_time - s->TCTR_base) / PCI_PERIOD; s->rtl8139_mmio_io_addr_dummy = 0; } -- cgit v1.2.3