From aeb83edbf3d67b737b6cfd198b1b0cfcbb7327e8 Mon Sep 17 00:00:00 2001 From: Marcin Krzeminski Date: Wed, 30 Mar 2016 17:27:23 +0100 Subject: block: m25p80: Dummy cycles for N25Q256/512 Use the setting from the volatile cfg register to correctly set the number of dummy cycles. Signed-off-by: Marcin Krzeminski Reviewed-by: Peter Crosthwaite Message-id: 1458719789-29868-8-git-send-email-marcin.krzeminski@nokia.com Signed-off-by: Peter Maydell --- hw/block/m25p80.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'hw/block') diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c index 3394f221d9..04e8730fa4 100644 --- a/hw/block/m25p80.c +++ b/hw/block/m25p80.c @@ -583,7 +583,11 @@ static void decode_new_cmd(Flash *s, uint32_t value) case FAST_READ: case DOR: case QOR: - s->needed_bytes = get_addr_length(s) + 1; + s->needed_bytes = get_addr_length(s); + if (((s->pi->jedec >> 16) & 0xFF) == JEDEC_NUMONYX) { + /* Dummy cycles modeled with bytes writes instead of bits */ + s->needed_bytes += extract32(s->volatile_cfg, 4, 4); + } s->pos = 0; s->len = 0; s->state = STATE_COLLECTING_DATA; @@ -596,7 +600,9 @@ static void decode_new_cmd(Flash *s, uint32_t value) s->needed_bytes = 4; break; default: - s->needed_bytes = get_addr_length(s) + 2; + s->needed_bytes = get_addr_length(s); + /* Dummy cycles modeled with bytes writes instead of bits */ + s->needed_bytes += extract32(s->volatile_cfg, 4, 4); } s->pos = 0; s->len = 0; @@ -610,7 +616,9 @@ static void decode_new_cmd(Flash *s, uint32_t value) s->needed_bytes = 6; break; default: - s->needed_bytes = get_addr_length(s) + 4; + s->needed_bytes = get_addr_length(s); + /* Dummy cycles modeled with bytes writes instead of bits */ + s->needed_bytes += extract32(s->volatile_cfg, 4, 4); } s->pos = 0; s->len = 0; -- cgit v1.2.3