From 49ab747f668f421138d5b40d83fa279c4c5e278d Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Fri, 1 Mar 2013 13:59:19 +0100 Subject: hw: move target-independent files to subdirectories This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: Paolo Bonzini --- hw/block/pflash_cfi02.c | 787 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 787 insertions(+) create mode 100644 hw/block/pflash_cfi02.c (limited to 'hw/block/pflash_cfi02.c') diff --git a/hw/block/pflash_cfi02.c b/hw/block/pflash_cfi02.c new file mode 100644 index 0000000000..9a7fa707ca --- /dev/null +++ b/hw/block/pflash_cfi02.c @@ -0,0 +1,787 @@ +/* + * CFI parallel flash with AMD command set emulation + * + * Copyright (c) 2005 Jocelyn Mayer + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see . + */ + +/* + * For now, this code can emulate flashes of 1, 2 or 4 bytes width. + * Supported commands/modes are: + * - flash read + * - flash write + * - flash ID read + * - sector erase + * - chip erase + * - unlock bypass command + * - CFI queries + * + * It does not support flash interleaving. + * It does not implement boot blocs with reduced size + * It does not implement software data protection as found in many real chips + * It does not implement erase suspend/resume commands + * It does not implement multiple sectors erase + */ + +#include "hw/hw.h" +#include "hw/block/flash.h" +#include "qemu/timer.h" +#include "block/block.h" +#include "exec/address-spaces.h" +#include "qemu/host-utils.h" +#include "hw/sysbus.h" + +//#define PFLASH_DEBUG +#ifdef PFLASH_DEBUG +#define DPRINTF(fmt, ...) \ +do { \ + fprintf(stderr "PFLASH: " fmt , ## __VA_ARGS__); \ +} while (0) +#else +#define DPRINTF(fmt, ...) do { } while (0) +#endif + +#define PFLASH_LAZY_ROMD_THRESHOLD 42 + +struct pflash_t { + SysBusDevice busdev; + BlockDriverState *bs; + uint32_t sector_len; + uint32_t nb_blocs; + uint32_t chip_len; + uint8_t mappings; + uint8_t width; + uint8_t be; + int wcycle; /* if 0, the flash is read normally */ + int bypass; + int ro; + uint8_t cmd; + uint8_t status; + /* FIXME: implement array device properties */ + uint16_t ident0; + uint16_t ident1; + uint16_t ident2; + uint16_t ident3; + uint16_t unlock_addr0; + uint16_t unlock_addr1; + uint8_t cfi_len; + uint8_t cfi_table[0x52]; + QEMUTimer *timer; + /* The device replicates the flash memory across its memory space. Emulate + * that by having a container (.mem) filled with an array of aliases + * (.mem_mappings) pointing to the flash memory (.orig_mem). + */ + MemoryRegion mem; + MemoryRegion *mem_mappings; /* array; one per mapping */ + MemoryRegion orig_mem; + int rom_mode; + int read_counter; /* used for lazy switch-back to rom mode */ + char *name; + void *storage; +}; + +/* + * Set up replicated mappings of the same region. + */ +static void pflash_setup_mappings(pflash_t *pfl) +{ + unsigned i; + hwaddr size = memory_region_size(&pfl->orig_mem); + + memory_region_init(&pfl->mem, "pflash", pfl->mappings * size); + pfl->mem_mappings = g_new(MemoryRegion, pfl->mappings); + for (i = 0; i < pfl->mappings; ++i) { + memory_region_init_alias(&pfl->mem_mappings[i], "pflash-alias", + &pfl->orig_mem, 0, size); + memory_region_add_subregion(&pfl->mem, i * size, &pfl->mem_mappings[i]); + } +} + +static void pflash_register_memory(pflash_t *pfl, int rom_mode) +{ + memory_region_rom_device_set_readable(&pfl->orig_mem, rom_mode); + pfl->rom_mode = rom_mode; +} + +static void pflash_timer (void *opaque) +{ + pflash_t *pfl = opaque; + + DPRINTF("%s: command %02x done\n", __func__, pfl->cmd); + /* Reset flash */ + pfl->status ^= 0x80; + if (pfl->bypass) { + pfl->wcycle = 2; + } else { + pflash_register_memory(pfl, 1); + pfl->wcycle = 0; + } + pfl->cmd = 0; +} + +static uint32_t pflash_read (pflash_t *pfl, hwaddr offset, + int width, int be) +{ + hwaddr boff; + uint32_t ret; + uint8_t *p; + + DPRINTF("%s: offset " TARGET_FMT_plx "\n", __func__, offset); + ret = -1; + /* Lazy reset to ROMD mode after a certain amount of read accesses */ + if (!pfl->rom_mode && pfl->wcycle == 0 && + ++pfl->read_counter > PFLASH_LAZY_ROMD_THRESHOLD) { + pflash_register_memory(pfl, 1); + } + offset &= pfl->chip_len - 1; + boff = offset & 0xFF; + if (pfl->width == 2) + boff = boff >> 1; + else if (pfl->width == 4) + boff = boff >> 2; + switch (pfl->cmd) { + default: + /* This should never happen : reset state & treat it as a read*/ + DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd); + pfl->wcycle = 0; + pfl->cmd = 0; + /* fall through to the read code */ + case 0x80: + /* We accept reads during second unlock sequence... */ + case 0x00: + flash_read: + /* Flash area read */ + p = pfl->storage; + switch (width) { + case 1: + ret = p[offset]; +// DPRINTF("%s: data offset %08x %02x\n", __func__, offset, ret); + break; + case 2: + if (be) { + ret = p[offset] << 8; + ret |= p[offset + 1]; + } else { + ret = p[offset]; + ret |= p[offset + 1] << 8; + } +// DPRINTF("%s: data offset %08x %04x\n", __func__, offset, ret); + break; + case 4: + if (be) { + ret = p[offset] << 24; + ret |= p[offset + 1] << 16; + ret |= p[offset + 2] << 8; + ret |= p[offset + 3]; + } else { + ret = p[offset]; + ret |= p[offset + 1] << 8; + ret |= p[offset + 2] << 16; + ret |= p[offset + 3] << 24; + } +// DPRINTF("%s: data offset %08x %08x\n", __func__, offset, ret); + break; + } + break; + case 0x90: + /* flash ID read */ + switch (boff) { + case 0x00: + case 0x01: + ret = boff & 0x01 ? pfl->ident1 : pfl->ident0; + break; + case 0x02: + ret = 0x00; /* Pretend all sectors are unprotected */ + break; + case 0x0E: + case 0x0F: + ret = boff & 0x01 ? pfl->ident3 : pfl->ident2; + if (ret == (uint8_t)-1) { + goto flash_read; + } + break; + default: + goto flash_read; + } + DPRINTF("%s: ID " TARGET_FMT_plx " %x\n", __func__, boff, ret); + break; + case 0xA0: + case 0x10: + case 0x30: + /* Status register read */ + ret = pfl->status; + DPRINTF("%s: status %x\n", __func__, ret); + /* Toggle bit 6 */ + pfl->status ^= 0x40; + break; + case 0x98: + /* CFI query mode */ + if (boff > pfl->cfi_len) + ret = 0; + else + ret = pfl->cfi_table[boff]; + break; + } + + return ret; +} + +/* update flash content on disk */ +static void pflash_update(pflash_t *pfl, int offset, + int size) +{ + int offset_end; + if (pfl->bs) { + offset_end = offset + size; + /* round to sectors */ + offset = offset >> 9; + offset_end = (offset_end + 511) >> 9; + bdrv_write(pfl->bs, offset, pfl->storage + (offset << 9), + offset_end - offset); + } +} + +static void pflash_write (pflash_t *pfl, hwaddr offset, + uint32_t value, int width, int be) +{ + hwaddr boff; + uint8_t *p; + uint8_t cmd; + + cmd = value; + if (pfl->cmd != 0xA0 && cmd == 0xF0) { +#if 0 + DPRINTF("%s: flash reset asked (%02x %02x)\n", + __func__, pfl->cmd, cmd); +#endif + goto reset_flash; + } + DPRINTF("%s: offset " TARGET_FMT_plx " %08x %d %d\n", __func__, + offset, value, width, pfl->wcycle); + offset &= pfl->chip_len - 1; + + DPRINTF("%s: offset " TARGET_FMT_plx " %08x %d\n", __func__, + offset, value, width); + boff = offset & (pfl->sector_len - 1); + if (pfl->width == 2) + boff = boff >> 1; + else if (pfl->width == 4) + boff = boff >> 2; + switch (pfl->wcycle) { + case 0: + /* Set the device in I/O access mode if required */ + if (pfl->rom_mode) + pflash_register_memory(pfl, 0); + pfl->read_counter = 0; + /* We're in read mode */ + check_unlock0: + if (boff == 0x55 && cmd == 0x98) { + enter_CFI_mode: + /* Enter CFI query mode */ + pfl->wcycle = 7; + pfl->cmd = 0x98; + return; + } + if (boff != pfl->unlock_addr0 || cmd != 0xAA) { + DPRINTF("%s: unlock0 failed " TARGET_FMT_plx " %02x %04x\n", + __func__, boff, cmd, pfl->unlock_addr0); + goto reset_flash; + } + DPRINTF("%s: unlock sequence started\n", __func__); + break; + case 1: + /* We started an unlock sequence */ + check_unlock1: + if (boff != pfl->unlock_addr1 || cmd != 0x55) { + DPRINTF("%s: unlock1 failed " TARGET_FMT_plx " %02x\n", __func__, + boff, cmd); + goto reset_flash; + } + DPRINTF("%s: unlock sequence done\n", __func__); + break; + case 2: + /* We finished an unlock sequence */ + if (!pfl->bypass && boff != pfl->unlock_addr0) { + DPRINTF("%s: command failed " TARGET_FMT_plx " %02x\n", __func__, + boff, cmd); + goto reset_flash; + } + switch (cmd) { + case 0x20: + pfl->bypass = 1; + goto do_bypass; + case 0x80: + case 0x90: + case 0xA0: + pfl->cmd = cmd; + DPRINTF("%s: starting command %02x\n", __func__, cmd); + break; + default: + DPRINTF("%s: unknown command %02x\n", __func__, cmd); + goto reset_flash; + } + break; + case 3: + switch (pfl->cmd) { + case 0x80: + /* We need another unlock sequence */ + goto check_unlock0; + case 0xA0: + DPRINTF("%s: write data offset " TARGET_FMT_plx " %08x %d\n", + __func__, offset, value, width); + p = pfl->storage; + if (!pfl->ro) { + switch (width) { + case 1: + p[offset] &= value; + pflash_update(pfl, offset, 1); + break; + case 2: + if (be) { + p[offset] &= value >> 8; + p[offset + 1] &= value; + } else { + p[offset] &= value; + p[offset + 1] &= value >> 8; + } + pflash_update(pfl, offset, 2); + break; + case 4: + if (be) { + p[offset] &= value >> 24; + p[offset + 1] &= value >> 16; + p[offset + 2] &= value >> 8; + p[offset + 3] &= value; + } else { + p[offset] &= value; + p[offset + 1] &= value >> 8; + p[offset + 2] &= value >> 16; + p[offset + 3] &= value >> 24; + } + pflash_update(pfl, offset, 4); + break; + } + } + pfl->status = 0x00 | ~(value & 0x80); + /* Let's pretend write is immediate */ + if (pfl->bypass) + goto do_bypass; + goto reset_flash; + case 0x90: + if (pfl->bypass && cmd == 0x00) { + /* Unlock bypass reset */ + goto reset_flash; + } + /* We can enter CFI query mode from autoselect mode */ + if (boff == 0x55 && cmd == 0x98) + goto enter_CFI_mode; + /* No break here */ + default: + DPRINTF("%s: invalid write for command %02x\n", + __func__, pfl->cmd); + goto reset_flash; + } + case 4: + switch (pfl->cmd) { + case 0xA0: + /* Ignore writes while flash data write is occurring */ + /* As we suppose write is immediate, this should never happen */ + return; + case 0x80: + goto check_unlock1; + default: + /* Should never happen */ + DPRINTF("%s: invalid command state %02x (wc 4)\n", + __func__, pfl->cmd); + goto reset_flash; + } + break; + case 5: + switch (cmd) { + case 0x10: + if (boff != pfl->unlock_addr0) { + DPRINTF("%s: chip erase: invalid address " TARGET_FMT_plx "\n", + __func__, offset); + goto reset_flash; + } + /* Chip erase */ + DPRINTF("%s: start chip erase\n", __func__); + if (!pfl->ro) { + memset(pfl->storage, 0xFF, pfl->chip_len); + pflash_update(pfl, 0, pfl->chip_len); + } + pfl->status = 0x00; + /* Let's wait 5 seconds before chip erase is done */ + qemu_mod_timer(pfl->timer, + qemu_get_clock_ns(vm_clock) + (get_ticks_per_sec() * 5)); + break; + case 0x30: + /* Sector erase */ + p = pfl->storage; + offset &= ~(pfl->sector_len - 1); + DPRINTF("%s: start sector erase at " TARGET_FMT_plx "\n", __func__, + offset); + if (!pfl->ro) { + memset(p + offset, 0xFF, pfl->sector_len); + pflash_update(pfl, offset, pfl->sector_len); + } + pfl->status = 0x00; + /* Let's wait 1/2 second before sector erase is done */ + qemu_mod_timer(pfl->timer, + qemu_get_clock_ns(vm_clock) + (get_ticks_per_sec() / 2)); + break; + default: + DPRINTF("%s: invalid command %02x (wc 5)\n", __func__, cmd); + goto reset_flash; + } + pfl->cmd = cmd; + break; + case 6: + switch (pfl->cmd) { + case 0x10: + /* Ignore writes during chip erase */ + return; + case 0x30: + /* Ignore writes during sector erase */ + return; + default: + /* Should never happen */ + DPRINTF("%s: invalid command state %02x (wc 6)\n", + __func__, pfl->cmd); + goto reset_flash; + } + break; + case 7: /* Special value for CFI queries */ + DPRINTF("%s: invalid write in CFI query mode\n", __func__); + goto reset_flash; + default: + /* Should never happen */ + DPRINTF("%s: invalid write state (wc 7)\n", __func__); + goto reset_flash; + } + pfl->wcycle++; + + return; + + /* Reset flash */ + reset_flash: + pfl->bypass = 0; + pfl->wcycle = 0; + pfl->cmd = 0; + return; + + do_bypass: + pfl->wcycle = 2; + pfl->cmd = 0; +} + + +static uint32_t pflash_readb_be(void *opaque, hwaddr addr) +{ + return pflash_read(opaque, addr, 1, 1); +} + +static uint32_t pflash_readb_le(void *opaque, hwaddr addr) +{ + return pflash_read(opaque, addr, 1, 0); +} + +static uint32_t pflash_readw_be(void *opaque, hwaddr addr) +{ + pflash_t *pfl = opaque; + + return pflash_read(pfl, addr, 2, 1); +} + +static uint32_t pflash_readw_le(void *opaque, hwaddr addr) +{ + pflash_t *pfl = opaque; + + return pflash_read(pfl, addr, 2, 0); +} + +static uint32_t pflash_readl_be(void *opaque, hwaddr addr) +{ + pflash_t *pfl = opaque; + + return pflash_read(pfl, addr, 4, 1); +} + +static uint32_t pflash_readl_le(void *opaque, hwaddr addr) +{ + pflash_t *pfl = opaque; + + return pflash_read(pfl, addr, 4, 0); +} + +static void pflash_writeb_be(void *opaque, hwaddr addr, + uint32_t value) +{ + pflash_write(opaque, addr, value, 1, 1); +} + +static void pflash_writeb_le(void *opaque, hwaddr addr, + uint32_t value) +{ + pflash_write(opaque, addr, value, 1, 0); +} + +static void pflash_writew_be(void *opaque, hwaddr addr, + uint32_t value) +{ + pflash_t *pfl = opaque; + + pflash_write(pfl, addr, value, 2, 1); +} + +static void pflash_writew_le(void *opaque, hwaddr addr, + uint32_t value) +{ + pflash_t *pfl = opaque; + + pflash_write(pfl, addr, value, 2, 0); +} + +static void pflash_writel_be(void *opaque, hwaddr addr, + uint32_t value) +{ + pflash_t *pfl = opaque; + + pflash_write(pfl, addr, value, 4, 1); +} + +static void pflash_writel_le(void *opaque, hwaddr addr, + uint32_t value) +{ + pflash_t *pfl = opaque; + + pflash_write(pfl, addr, value, 4, 0); +} + +static const MemoryRegionOps pflash_cfi02_ops_be = { + .old_mmio = { + .read = { pflash_readb_be, pflash_readw_be, pflash_readl_be, }, + .write = { pflash_writeb_be, pflash_writew_be, pflash_writel_be, }, + }, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static const MemoryRegionOps pflash_cfi02_ops_le = { + .old_mmio = { + .read = { pflash_readb_le, pflash_readw_le, pflash_readl_le, }, + .write = { pflash_writeb_le, pflash_writew_le, pflash_writel_le, }, + }, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static int pflash_cfi02_init(SysBusDevice *dev) +{ + pflash_t *pfl = FROM_SYSBUS(typeof(*pfl), dev); + uint32_t chip_len; + int ret; + + chip_len = pfl->sector_len * pfl->nb_blocs; + /* XXX: to be fixed */ +#if 0 + if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) && + total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024)) + return NULL; +#endif + + memory_region_init_rom_device(&pfl->orig_mem, pfl->be ? + &pflash_cfi02_ops_be : &pflash_cfi02_ops_le, + pfl, pfl->name, chip_len); + vmstate_register_ram(&pfl->orig_mem, DEVICE(pfl)); + pfl->storage = memory_region_get_ram_ptr(&pfl->orig_mem); + pfl->chip_len = chip_len; + if (pfl->bs) { + /* read the initial flash content */ + ret = bdrv_read(pfl->bs, 0, pfl->storage, chip_len >> 9); + if (ret < 0) { + g_free(pfl); + return 1; + } + } + + pflash_setup_mappings(pfl); + pfl->rom_mode = 1; + sysbus_init_mmio(dev, &pfl->mem); + + if (pfl->bs) { + pfl->ro = bdrv_is_read_only(pfl->bs); + } else { + pfl->ro = 0; + } + + pfl->timer = qemu_new_timer_ns(vm_clock, pflash_timer, pfl); + pfl->wcycle = 0; + pfl->cmd = 0; + pfl->status = 0; + /* Hardcoded CFI table (mostly from SG29 Spansion flash) */ + pfl->cfi_len = 0x52; + /* Standard "QRY" string */ + pfl->cfi_table[0x10] = 'Q'; + pfl->cfi_table[0x11] = 'R'; + pfl->cfi_table[0x12] = 'Y'; + /* Command set (AMD/Fujitsu) */ + pfl->cfi_table[0x13] = 0x02; + pfl->cfi_table[0x14] = 0x00; + /* Primary extended table address */ + pfl->cfi_table[0x15] = 0x31; + pfl->cfi_table[0x16] = 0x00; + /* Alternate command set (none) */ + pfl->cfi_table[0x17] = 0x00; + pfl->cfi_table[0x18] = 0x00; + /* Alternate extended table (none) */ + pfl->cfi_table[0x19] = 0x00; + pfl->cfi_table[0x1A] = 0x00; + /* Vcc min */ + pfl->cfi_table[0x1B] = 0x27; + /* Vcc max */ + pfl->cfi_table[0x1C] = 0x36; + /* Vpp min (no Vpp pin) */ + pfl->cfi_table[0x1D] = 0x00; + /* Vpp max (no Vpp pin) */ + pfl->cfi_table[0x1E] = 0x00; + /* Reserved */ + pfl->cfi_table[0x1F] = 0x07; + /* Timeout for min size buffer write (NA) */ + pfl->cfi_table[0x20] = 0x00; + /* Typical timeout for block erase (512 ms) */ + pfl->cfi_table[0x21] = 0x09; + /* Typical timeout for full chip erase (4096 ms) */ + pfl->cfi_table[0x22] = 0x0C; + /* Reserved */ + pfl->cfi_table[0x23] = 0x01; + /* Max timeout for buffer write (NA) */ + pfl->cfi_table[0x24] = 0x00; + /* Max timeout for block erase */ + pfl->cfi_table[0x25] = 0x0A; + /* Max timeout for chip erase */ + pfl->cfi_table[0x26] = 0x0D; + /* Device size */ + pfl->cfi_table[0x27] = ctz32(chip_len); + /* Flash device interface (8 & 16 bits) */ + pfl->cfi_table[0x28] = 0x02; + pfl->cfi_table[0x29] = 0x00; + /* Max number of bytes in multi-bytes write */ + /* XXX: disable buffered write as it's not supported */ + // pfl->cfi_table[0x2A] = 0x05; + pfl->cfi_table[0x2A] = 0x00; + pfl->cfi_table[0x2B] = 0x00; + /* Number of erase block regions (uniform) */ + pfl->cfi_table[0x2C] = 0x01; + /* Erase block region 1 */ + pfl->cfi_table[0x2D] = pfl->nb_blocs - 1; + pfl->cfi_table[0x2E] = (pfl->nb_blocs - 1) >> 8; + pfl->cfi_table[0x2F] = pfl->sector_len >> 8; + pfl->cfi_table[0x30] = pfl->sector_len >> 16; + + /* Extended */ + pfl->cfi_table[0x31] = 'P'; + pfl->cfi_table[0x32] = 'R'; + pfl->cfi_table[0x33] = 'I'; + + pfl->cfi_table[0x34] = '1'; + pfl->cfi_table[0x35] = '0'; + + pfl->cfi_table[0x36] = 0x00; + pfl->cfi_table[0x37] = 0x00; + pfl->cfi_table[0x38] = 0x00; + pfl->cfi_table[0x39] = 0x00; + + pfl->cfi_table[0x3a] = 0x00; + + pfl->cfi_table[0x3b] = 0x00; + pfl->cfi_table[0x3c] = 0x00; + + return 0; +} + +static Property pflash_cfi02_properties[] = { + DEFINE_PROP_DRIVE("drive", struct pflash_t, bs), + DEFINE_PROP_UINT32("num-blocks", struct pflash_t, nb_blocs, 0), + DEFINE_PROP_UINT32("sector-length", struct pflash_t, sector_len, 0), + DEFINE_PROP_UINT8("width", struct pflash_t, width, 0), + DEFINE_PROP_UINT8("mappings", struct pflash_t, mappings, 0), + DEFINE_PROP_UINT8("big-endian", struct pflash_t, be, 0), + DEFINE_PROP_UINT16("id0", struct pflash_t, ident0, 0), + DEFINE_PROP_UINT16("id1", struct pflash_t, ident1, 0), + DEFINE_PROP_UINT16("id2", struct pflash_t, ident2, 0), + DEFINE_PROP_UINT16("id3", struct pflash_t, ident3, 0), + DEFINE_PROP_UINT16("unlock-addr0", struct pflash_t, unlock_addr0, 0), + DEFINE_PROP_UINT16("unlock-addr1", struct pflash_t, unlock_addr1, 0), + DEFINE_PROP_STRING("name", struct pflash_t, name), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pflash_cfi02_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); + + k->init = pflash_cfi02_init; + dc->props = pflash_cfi02_properties; +} + +static const TypeInfo pflash_cfi02_info = { + .name = "cfi.pflash02", + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(struct pflash_t), + .class_init = pflash_cfi02_class_init, +}; + +static void pflash_cfi02_register_types(void) +{ + type_register_static(&pflash_cfi02_info); +} + +type_init(pflash_cfi02_register_types) + +pflash_t *pflash_cfi02_register(hwaddr base, + DeviceState *qdev, const char *name, + hwaddr size, + BlockDriverState *bs, uint32_t sector_len, + int nb_blocs, int nb_mappings, int width, + uint16_t id0, uint16_t id1, + uint16_t id2, uint16_t id3, + uint16_t unlock_addr0, uint16_t unlock_addr1, + int be) +{ + DeviceState *dev = qdev_create(NULL, "cfi.pflash02"); + SysBusDevice *busdev = SYS_BUS_DEVICE(dev); + pflash_t *pfl = (pflash_t *)object_dynamic_cast(OBJECT(dev), + "cfi.pflash02"); + + if (bs && qdev_prop_set_drive(dev, "drive", bs)) { + abort(); + } + qdev_prop_set_uint32(dev, "num-blocks", nb_blocs); + qdev_prop_set_uint32(dev, "sector-length", sector_len); + qdev_prop_set_uint8(dev, "width", width); + qdev_prop_set_uint8(dev, "mappings", nb_mappings); + qdev_prop_set_uint8(dev, "big-endian", !!be); + qdev_prop_set_uint16(dev, "id0", id0); + qdev_prop_set_uint16(dev, "id1", id1); + qdev_prop_set_uint16(dev, "id2", id2); + qdev_prop_set_uint16(dev, "id3", id3); + qdev_prop_set_uint16(dev, "unlock-addr0", unlock_addr0); + qdev_prop_set_uint16(dev, "unlock-addr1", unlock_addr1); + qdev_prop_set_string(dev, "name", name); + qdev_init_nofail(dev); + + sysbus_mmio_map(busdev, 0, base); + return pfl; +} -- cgit v1.2.3