From 2b9e35760a8ff5548f6789d048c6e6e3c22c70ee Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marc-Andr=C3=A9=20Lureau?= Date: Mon, 12 Sep 2016 13:19:06 +0400 Subject: monitor: remove mhandler.cmd_new MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is no longer necessary now that we aren't using middle mode anymore. Signed-off-by: Marc-André Lureau Reviewed-by: Eric Blake Message-Id: <20160912091913.15831-12-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster Signed-off-by: Markus Armbruster --- hmp-commands.hx | 208 ++++++++++++++++++++++++++++---------------------------- 1 file changed, 104 insertions(+), 104 deletions(-) (limited to 'hmp-commands.hx') diff --git a/hmp-commands.hx b/hmp-commands.hx index 74f32e515c..06bef470b9 100644 --- a/hmp-commands.hx +++ b/hmp-commands.hx @@ -14,7 +14,7 @@ ETEXI .args_type = "name:S?", .params = "[cmd]", .help = "show the help", - .mhandler.cmd = do_help_cmd, + .cmd = do_help_cmd, }, STEXI @@ -28,7 +28,7 @@ ETEXI .args_type = "device:B", .params = "device|all", .help = "commit changes to the disk images (if -snapshot is used) or backing files", - .mhandler.cmd = hmp_commit, + .cmd = hmp_commit, }, STEXI @@ -47,7 +47,7 @@ ETEXI .args_type = "", .params = "", .help = "quit the emulator", - .mhandler.cmd = hmp_quit, + .cmd = hmp_quit, }, STEXI @@ -61,7 +61,7 @@ ETEXI .args_type = "device:B,size:o", .params = "device size", .help = "resize a block image", - .mhandler.cmd = hmp_block_resize, + .cmd = hmp_block_resize, }, STEXI @@ -78,7 +78,7 @@ ETEXI .args_type = "device:B,speed:o?,base:s?", .params = "device [speed [base]]", .help = "copy data from a backing file into a block device", - .mhandler.cmd = hmp_block_stream, + .cmd = hmp_block_stream, }, STEXI @@ -92,7 +92,7 @@ ETEXI .args_type = "device:B,speed:o", .params = "device speed", .help = "set maximum speed for a background block operation", - .mhandler.cmd = hmp_block_job_set_speed, + .cmd = hmp_block_job_set_speed, }, STEXI @@ -107,7 +107,7 @@ ETEXI .params = "[-f] device", .help = "stop an active background block operation (use -f" "\n\t\t\t if the operation is currently paused)", - .mhandler.cmd = hmp_block_job_cancel, + .cmd = hmp_block_job_cancel, }, STEXI @@ -121,7 +121,7 @@ ETEXI .args_type = "device:B", .params = "device", .help = "stop an active background block operation", - .mhandler.cmd = hmp_block_job_complete, + .cmd = hmp_block_job_complete, }, STEXI @@ -136,7 +136,7 @@ ETEXI .args_type = "device:B", .params = "device", .help = "pause an active background block operation", - .mhandler.cmd = hmp_block_job_pause, + .cmd = hmp_block_job_pause, }, STEXI @@ -150,7 +150,7 @@ ETEXI .args_type = "device:B", .params = "device", .help = "resume a paused background block operation", - .mhandler.cmd = hmp_block_job_resume, + .cmd = hmp_block_job_resume, }, STEXI @@ -164,7 +164,7 @@ ETEXI .args_type = "force:-f,device:B", .params = "[-f] device", .help = "eject a removable medium (use -f to force it)", - .mhandler.cmd = hmp_eject, + .cmd = hmp_eject, }, STEXI @@ -178,7 +178,7 @@ ETEXI .args_type = "id:B", .params = "device", .help = "remove host block device", - .mhandler.cmd = hmp_drive_del, + .cmd = hmp_drive_del, }, STEXI @@ -197,7 +197,7 @@ ETEXI .args_type = "device:B,target:F,arg:s?,read-only-mode:s?", .params = "device filename [format [read-only-mode]]", .help = "change a removable medium, optional format", - .mhandler.cmd = hmp_change, + .cmd = hmp_change, }, STEXI @@ -256,7 +256,7 @@ ETEXI .args_type = "filename:F", .params = "filename", .help = "save screen into PPM image 'filename'", - .mhandler.cmd = hmp_screendump, + .cmd = hmp_screendump, }, STEXI @@ -270,7 +270,7 @@ ETEXI .args_type = "filename:F", .params = "filename", .help = "output logs to 'filename'", - .mhandler.cmd = hmp_logfile, + .cmd = hmp_logfile, }, STEXI @@ -285,7 +285,7 @@ ETEXI .params = "name on|off [vcpu]", .help = "changes status of a specific trace event " "(vcpu: vCPU to set, default is all)", - .mhandler.cmd = hmp_trace_event, + .cmd = hmp_trace_event, .command_completion = trace_event_completion, }, @@ -301,7 +301,7 @@ ETEXI .args_type = "op:s?,arg:F?", .params = "on|off|flush|set [arg]", .help = "open, close, or flush trace file, or set a new file name", - .mhandler.cmd = hmp_trace_file, + .cmd = hmp_trace_file, }, STEXI @@ -316,7 +316,7 @@ ETEXI .args_type = "items:s", .params = "item1[,...]", .help = "activate logging of the specified items", - .mhandler.cmd = hmp_log, + .cmd = hmp_log, }, STEXI @@ -330,7 +330,7 @@ ETEXI .args_type = "name:s?", .params = "[tag|id]", .help = "save a VM snapshot. If no tag or id are provided, a new snapshot is created", - .mhandler.cmd = hmp_savevm, + .cmd = hmp_savevm, }, STEXI @@ -347,7 +347,7 @@ ETEXI .args_type = "name:s", .params = "tag|id", .help = "restore a VM snapshot from its tag or id", - .mhandler.cmd = hmp_loadvm, + .cmd = hmp_loadvm, .command_completion = loadvm_completion, }, @@ -363,7 +363,7 @@ ETEXI .args_type = "name:s", .params = "tag|id", .help = "delete a VM snapshot from its tag or id", - .mhandler.cmd = hmp_delvm, + .cmd = hmp_delvm, .command_completion = delvm_completion, }, @@ -378,7 +378,7 @@ ETEXI .args_type = "option:s?", .params = "[on|off]", .help = "run emulation in singlestep mode or switch to normal mode", - .mhandler.cmd = hmp_singlestep, + .cmd = hmp_singlestep, }, STEXI @@ -393,7 +393,7 @@ ETEXI .args_type = "", .params = "", .help = "stop emulation", - .mhandler.cmd = hmp_stop, + .cmd = hmp_stop, }, STEXI @@ -407,7 +407,7 @@ ETEXI .args_type = "", .params = "", .help = "resume emulation", - .mhandler.cmd = hmp_cont, + .cmd = hmp_cont, }, STEXI @@ -421,7 +421,7 @@ ETEXI .args_type = "", .params = "", .help = "wakeup guest from suspend", - .mhandler.cmd = hmp_system_wakeup, + .cmd = hmp_system_wakeup, }, STEXI @@ -435,7 +435,7 @@ ETEXI .args_type = "device:s?", .params = "[device]", .help = "start gdbserver on given device (default 'tcp::1234'), stop with 'none'", - .mhandler.cmd = hmp_gdbserver, + .cmd = hmp_gdbserver, }, STEXI @@ -449,7 +449,7 @@ ETEXI .args_type = "fmt:/,addr:l", .params = "/fmt addr", .help = "virtual memory dump starting at 'addr'", - .mhandler.cmd = hmp_memory_dump, + .cmd = hmp_memory_dump, }, STEXI @@ -463,7 +463,7 @@ ETEXI .args_type = "fmt:/,addr:l", .params = "/fmt addr", .help = "physical memory dump starting at 'addr'", - .mhandler.cmd = hmp_physical_memory_dump, + .cmd = hmp_physical_memory_dump, }, STEXI @@ -530,7 +530,7 @@ ETEXI .args_type = "fmt:/,val:l", .params = "/fmt expr", .help = "print expression value (use $reg for CPU register access)", - .mhandler.cmd = do_print, + .cmd = do_print, }, STEXI @@ -545,7 +545,7 @@ ETEXI .args_type = "fmt:/,addr:i,index:i.", .params = "/fmt addr", .help = "I/O port read", - .mhandler.cmd = hmp_ioport_read, + .cmd = hmp_ioport_read, }, STEXI @@ -559,7 +559,7 @@ ETEXI .args_type = "fmt:/,addr:i,val:i", .params = "/fmt addr value", .help = "I/O port write", - .mhandler.cmd = hmp_ioport_write, + .cmd = hmp_ioport_write, }, STEXI @@ -573,7 +573,7 @@ ETEXI .args_type = "keys:s,hold-time:i?", .params = "keys [hold_ms]", .help = "send keys to the VM (e.g. 'sendkey ctrl-alt-f1', default hold time=100 ms)", - .mhandler.cmd = hmp_sendkey, + .cmd = hmp_sendkey, .command_completion = sendkey_completion, }, @@ -596,7 +596,7 @@ ETEXI .args_type = "", .params = "", .help = "reset the system", - .mhandler.cmd = hmp_system_reset, + .cmd = hmp_system_reset, }, STEXI @@ -610,7 +610,7 @@ ETEXI .args_type = "", .params = "", .help = "send system power down event", - .mhandler.cmd = hmp_system_powerdown, + .cmd = hmp_system_powerdown, }, STEXI @@ -624,7 +624,7 @@ ETEXI .args_type = "start:i,size:i", .params = "addr size", .help = "compute the checksum of a memory region", - .mhandler.cmd = hmp_sum, + .cmd = hmp_sum, }, STEXI @@ -638,7 +638,7 @@ ETEXI .args_type = "devname:s", .params = "device", .help = "add USB device (e.g. 'host:bus.addr' or 'host:vendor_id:product_id')", - .mhandler.cmd = hmp_usb_add, + .cmd = hmp_usb_add, }, STEXI @@ -653,7 +653,7 @@ ETEXI .args_type = "devname:s", .params = "device", .help = "remove USB device 'bus.addr'", - .mhandler.cmd = hmp_usb_del, + .cmd = hmp_usb_del, }, STEXI @@ -669,7 +669,7 @@ ETEXI .args_type = "device:O", .params = "driver[,prop=value][,...]", .help = "add device, like -device on the command line", - .mhandler.cmd = hmp_device_add, + .cmd = hmp_device_add, .command_completion = device_add_completion, }, @@ -684,7 +684,7 @@ ETEXI .args_type = "id:s", .params = "device", .help = "remove device", - .mhandler.cmd = hmp_device_del, + .cmd = hmp_device_del, .command_completion = device_del_completion, }, @@ -700,7 +700,7 @@ ETEXI .args_type = "index:i", .params = "index", .help = "set the default CPU", - .mhandler.cmd = hmp_cpu, + .cmd = hmp_cpu, }, STEXI @@ -714,7 +714,7 @@ ETEXI .args_type = "dx_str:s,dy_str:s,dz_str:s?", .params = "dx dy [dz]", .help = "send mouse move events", - .mhandler.cmd = hmp_mouse_move, + .cmd = hmp_mouse_move, }, STEXI @@ -729,7 +729,7 @@ ETEXI .args_type = "button_state:i", .params = "state", .help = "change mouse button state (1=L, 2=M, 4=R)", - .mhandler.cmd = hmp_mouse_button, + .cmd = hmp_mouse_button, }, STEXI @@ -743,7 +743,7 @@ ETEXI .args_type = "index:i", .params = "index", .help = "set which mouse device receives events", - .mhandler.cmd = hmp_mouse_set, + .cmd = hmp_mouse_set, }, STEXI @@ -761,7 +761,7 @@ ETEXI .args_type = "path:F,freq:i?,bits:i?,nchannels:i?", .params = "path [frequency [bits [channels]]]", .help = "capture audio to a wave file (default frequency=44100 bits=16 channels=2)", - .mhandler.cmd = hmp_wavcapture, + .cmd = hmp_wavcapture, }, STEXI @item wavcapture @var{filename} [@var{frequency} [@var{bits} [@var{channels}]]] @@ -782,7 +782,7 @@ ETEXI .args_type = "n:i", .params = "capture index", .help = "stop capture", - .mhandler.cmd = hmp_stopcapture, + .cmd = hmp_stopcapture, }, STEXI @item stopcapture @var{index} @@ -798,7 +798,7 @@ ETEXI .args_type = "val:l,size:i,filename:s", .params = "addr size file", .help = "save to disk virtual memory dump starting at 'addr' of size 'size'", - .mhandler.cmd = hmp_memsave, + .cmd = hmp_memsave, }, STEXI @@ -812,7 +812,7 @@ ETEXI .args_type = "val:l,size:i,filename:s", .params = "addr size file", .help = "save to disk physical memory dump starting at 'addr' of size 'size'", - .mhandler.cmd = hmp_pmemsave, + .cmd = hmp_pmemsave, }, STEXI @@ -826,7 +826,7 @@ ETEXI .args_type = "bootdevice:s", .params = "bootdevice", .help = "define new values for the boot device list", - .mhandler.cmd = hmp_boot_set, + .cmd = hmp_boot_set, }, STEXI @@ -844,7 +844,7 @@ ETEXI .args_type = "", .params = "", .help = "inject an NMI", - .mhandler.cmd = hmp_nmi, + .cmd = hmp_nmi, }, STEXI @item nmi @var{cpu} @@ -858,7 +858,7 @@ ETEXI .args_type = "device:s,data:s", .params = "device data", .help = "Write to a ring buffer character device", - .mhandler.cmd = hmp_ringbuf_write, + .cmd = hmp_ringbuf_write, .command_completion = ringbuf_write_completion, }, @@ -875,7 +875,7 @@ ETEXI .args_type = "device:s,size:i", .params = "device size", .help = "Read from a ring buffer character device", - .mhandler.cmd = hmp_ringbuf_read, + .cmd = hmp_ringbuf_read, .command_completion = ringbuf_write_completion, }, @@ -901,7 +901,7 @@ ETEXI " full copy of disk\n\t\t\t -i for migration without " "shared storage with incremental copy of disk " "(base image shared between src and destination)", - .mhandler.cmd = hmp_migrate, + .cmd = hmp_migrate, }, @@ -918,7 +918,7 @@ ETEXI .args_type = "", .params = "", .help = "cancel the current VM migration", - .mhandler.cmd = hmp_migrate_cancel, + .cmd = hmp_migrate_cancel, }, STEXI @@ -933,7 +933,7 @@ ETEXI .args_type = "uri:s", .params = "uri", .help = "Continue an incoming migration from an -incoming defer", - .mhandler.cmd = hmp_migrate_incoming, + .cmd = hmp_migrate_incoming, }, STEXI @@ -954,7 +954,7 @@ ETEXI "The cache size affects the number of cache misses." "In case of a high cache miss ratio you need to increase" " the cache size", - .mhandler.cmd = hmp_migrate_set_cache_size, + .cmd = hmp_migrate_set_cache_size, }, STEXI @@ -969,7 +969,7 @@ ETEXI .params = "value", .help = "set maximum speed (in bytes) for migrations. " "Defaults to MB if no size suffix is specified, ie. B/K/M/G/T", - .mhandler.cmd = hmp_migrate_set_speed, + .cmd = hmp_migrate_set_speed, }, STEXI @@ -983,7 +983,7 @@ ETEXI .args_type = "value:T", .params = "value", .help = "set maximum tolerated downtime (in seconds) for migrations", - .mhandler.cmd = hmp_migrate_set_downtime, + .cmd = hmp_migrate_set_downtime, }, STEXI @@ -997,7 +997,7 @@ ETEXI .args_type = "capability:s,state:b", .params = "capability state", .help = "Enable/Disable the usage of a capability for migration", - .mhandler.cmd = hmp_migrate_set_capability, + .cmd = hmp_migrate_set_capability, .command_completion = migrate_set_capability_completion, }, @@ -1012,7 +1012,7 @@ ETEXI .args_type = "parameter:s,value:s", .params = "parameter value", .help = "Set the parameter for migration", - .mhandler.cmd = hmp_migrate_set_parameter, + .cmd = hmp_migrate_set_parameter, .command_completion = migrate_set_parameter_completion, }, @@ -1029,7 +1029,7 @@ ETEXI .help = "Followup to a migration command to switch the migration" " to postcopy mode. The postcopy-ram capability must " "be set before the original migration command.", - .mhandler.cmd = hmp_migrate_start_postcopy, + .cmd = hmp_migrate_start_postcopy, }, STEXI @@ -1044,7 +1044,7 @@ ETEXI .args_type = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?", .params = "protocol hostname port tls-port cert-subject", .help = "set migration information for remote display", - .mhandler.cmd = hmp_client_migrate_info, + .cmd = hmp_client_migrate_info, }, STEXI @@ -1067,7 +1067,7 @@ ETEXI "-s: dump in kdump-compressed format, with snappy compression.\n\t\t\t" "begin: the starting physical address.\n\t\t\t" "length: the memory size, in bytes.", - .mhandler.cmd = hmp_dump_guest_memory, + .cmd = hmp_dump_guest_memory, }, @@ -1094,7 +1094,7 @@ ETEXI .args_type = "filename:F", .params = "", .help = "Save guest storage keys into file 'filename'.\n", - .mhandler.cmd = hmp_dump_skeys, + .cmd = hmp_dump_skeys, }, #endif @@ -1116,7 +1116,7 @@ ETEXI "The default format is qcow2. The -n flag requests QEMU\n\t\t\t" "to reuse the image found in new-image-file, instead of\n\t\t\t" "recreating it from scratch.", - .mhandler.cmd = hmp_snapshot_blkdev, + .cmd = hmp_snapshot_blkdev, }, STEXI @@ -1132,7 +1132,7 @@ ETEXI .help = "take an internal snapshot of device.\n\t\t\t" "The format of the image used by device must\n\t\t\t" "support it, such as qcow2.\n\t\t\t", - .mhandler.cmd = hmp_snapshot_blkdev_internal, + .cmd = hmp_snapshot_blkdev_internal, }, STEXI @@ -1150,7 +1150,7 @@ ETEXI "the snapshot matching both id and name.\n\t\t\t" "The format of the image used by device must\n\t\t\t" "support it, such as qcow2.\n\t\t\t", - .mhandler.cmd = hmp_snapshot_delete_blkdev_internal, + .cmd = hmp_snapshot_delete_blkdev_internal, }, STEXI @@ -1171,7 +1171,7 @@ ETEXI "in new-image-file, instead of recreating it from scratch.\n\t\t\t" "The -f flag requests QEMU to copy the whole disk,\n\t\t\t" "so that the result does not need a backing file.\n\t\t\t", - .mhandler.cmd = hmp_drive_mirror, + .cmd = hmp_drive_mirror, }, STEXI @item drive_mirror @@ -1194,7 +1194,7 @@ ETEXI "so that the result does not need a backing file.\n\t\t\t" "The -c flag requests QEMU to compress backup data\n\t\t\t" "(if the target format supports it).\n\t\t\t", - .mhandler.cmd = hmp_drive_backup, + .cmd = hmp_drive_backup, }, STEXI @item drive_backup @@ -1212,7 +1212,7 @@ ETEXI "[,snapshot=on|off][,cache=on|off]\n" "[,readonly=on|off][,copy-on-read=on|off]", .help = "add drive to PCI storage controller", - .mhandler.cmd = hmp_drive_add, + .cmd = hmp_drive_add, }, STEXI @@ -1236,7 +1236,7 @@ ETEXI " = error string or 32bit\n\t\t\t" " = 32bit x 4\n\t\t\t" " = 32bit x 4", - .mhandler.cmd = hmp_pcie_aer_inject_error, + .cmd = hmp_pcie_aer_inject_error, }, STEXI @@ -1250,7 +1250,7 @@ ETEXI .args_type = "device:s,opts:s?", .params = "tap|user|socket|vde|netmap|bridge|vhost-user|dump [options]", .help = "add host VLAN client", - .mhandler.cmd = hmp_host_net_add, + .cmd = hmp_host_net_add, .command_completion = host_net_add_completion, }, @@ -1265,7 +1265,7 @@ ETEXI .args_type = "vlan_id:i,device:s", .params = "vlan_id name", .help = "remove host VLAN client", - .mhandler.cmd = hmp_host_net_remove, + .cmd = hmp_host_net_remove, .command_completion = host_net_remove_completion, }, @@ -1280,7 +1280,7 @@ ETEXI .args_type = "netdev:O", .params = "[user|tap|socket|vde|bridge|hubport|netmap|vhost-user],id=str[,prop=value][,...]", .help = "add host network device", - .mhandler.cmd = hmp_netdev_add, + .cmd = hmp_netdev_add, .command_completion = netdev_add_completion, }, @@ -1295,7 +1295,7 @@ ETEXI .args_type = "id:s", .params = "id", .help = "remove host network device", - .mhandler.cmd = hmp_netdev_del, + .cmd = hmp_netdev_del, .command_completion = netdev_del_completion, }, @@ -1310,7 +1310,7 @@ ETEXI .args_type = "object:O", .params = "[qom-type=]type,id=str[,prop=value][,...]", .help = "create QOM object", - .mhandler.cmd = hmp_object_add, + .cmd = hmp_object_add, .command_completion = object_add_completion, }, @@ -1325,7 +1325,7 @@ ETEXI .args_type = "id:s", .params = "id", .help = "destroy QOM object", - .mhandler.cmd = hmp_object_del, + .cmd = hmp_object_del, .command_completion = object_del_completion, }, @@ -1341,7 +1341,7 @@ ETEXI .args_type = "arg1:s,arg2:s?,arg3:s?", .params = "[vlan_id name] [tcp|udp]:[hostaddr]:hostport-[guestaddr]:guestport", .help = "redirect TCP or UDP connections from host to guest (requires -net user)", - .mhandler.cmd = hmp_hostfwd_add, + .cmd = hmp_hostfwd_add, }, #endif STEXI @@ -1356,7 +1356,7 @@ ETEXI .args_type = "arg1:s,arg2:s?,arg3:s?", .params = "[vlan_id name] [tcp|udp]:[hostaddr]:hostport", .help = "remove host-to-guest TCP or UDP redirection", - .mhandler.cmd = hmp_hostfwd_remove, + .cmd = hmp_hostfwd_remove, }, #endif @@ -1371,7 +1371,7 @@ ETEXI .args_type = "value:M", .params = "target", .help = "request VM to change its memory allocation (in MB)", - .mhandler.cmd = hmp_balloon, + .cmd = hmp_balloon, }, STEXI @@ -1385,7 +1385,7 @@ ETEXI .args_type = "name:s,up:b", .params = "name on|off", .help = "change the link status of a network adapter", - .mhandler.cmd = hmp_set_link, + .cmd = hmp_set_link, .command_completion = set_link_completion, }, @@ -1400,7 +1400,7 @@ ETEXI .args_type = "action:s", .params = "[reset|shutdown|poweroff|pause|debug|none]", .help = "change watchdog action", - .mhandler.cmd = hmp_watchdog_action, + .cmd = hmp_watchdog_action, .command_completion = watchdog_action_completion, }, @@ -1415,7 +1415,7 @@ ETEXI .args_type = "aclname:s", .params = "aclname", .help = "list rules in the access control list", - .mhandler.cmd = hmp_acl_show, + .cmd = hmp_acl_show, }, STEXI @@ -1432,7 +1432,7 @@ ETEXI .args_type = "aclname:s,policy:s", .params = "aclname allow|deny", .help = "set default access control list policy", - .mhandler.cmd = hmp_acl_policy, + .cmd = hmp_acl_policy, }, STEXI @@ -1448,7 +1448,7 @@ ETEXI .args_type = "aclname:s,match:s,policy:s,index:i?", .params = "aclname match allow|deny [index]", .help = "add a match rule to the access control list", - .mhandler.cmd = hmp_acl_add, + .cmd = hmp_acl_add, }, STEXI @@ -1467,7 +1467,7 @@ ETEXI .args_type = "aclname:s,match:s", .params = "aclname match", .help = "remove a match rule from the access control list", - .mhandler.cmd = hmp_acl_remove, + .cmd = hmp_acl_remove, }, STEXI @@ -1481,7 +1481,7 @@ ETEXI .args_type = "aclname:s", .params = "aclname", .help = "reset the access control list", - .mhandler.cmd = hmp_acl_reset, + .cmd = hmp_acl_reset, }, STEXI @@ -1496,7 +1496,7 @@ ETEXI .args_type = "all:-a,writable:-w,uri:s", .params = "nbd_server_start [-a] [-w] host:port", .help = "serve block devices on the given host and port", - .mhandler.cmd = hmp_nbd_server_start, + .cmd = hmp_nbd_server_start, }, STEXI @item nbd_server_start @var{host}:@var{port} @@ -1512,7 +1512,7 @@ ETEXI .args_type = "writable:-w,device:B", .params = "nbd_server_add [-w] device", .help = "export a block device via NBD", - .mhandler.cmd = hmp_nbd_server_add, + .cmd = hmp_nbd_server_add, }, STEXI @item nbd_server_add @var{device} @@ -1527,7 +1527,7 @@ ETEXI .args_type = "", .params = "nbd_server_stop", .help = "stop serving block devices using the NBD protocol", - .mhandler.cmd = hmp_nbd_server_stop, + .cmd = hmp_nbd_server_stop, }, STEXI @item nbd_server_stop @@ -1543,7 +1543,7 @@ ETEXI .args_type = "broadcast:-b,cpu_index:i,bank:i,status:l,mcg_status:l,addr:l,misc:l", .params = "[-b] cpu bank status mcgstatus addr misc", .help = "inject a MCE on the given CPU [and broadcast to other CPUs with -b option]", - .mhandler.cmd = hmp_mce, + .cmd = hmp_mce, }, #endif @@ -1558,7 +1558,7 @@ ETEXI .args_type = "fdname:s", .params = "getfd name", .help = "receive a file descriptor via SCM rights and assign it a name", - .mhandler.cmd = hmp_getfd, + .cmd = hmp_getfd, }, STEXI @@ -1574,7 +1574,7 @@ ETEXI .args_type = "fdname:s", .params = "closefd name", .help = "close a file descriptor previously passed via SCM rights", - .mhandler.cmd = hmp_closefd, + .cmd = hmp_closefd, }, STEXI @@ -1590,7 +1590,7 @@ ETEXI .args_type = "device:B,password:s", .params = "block_passwd device password", .help = "set the password of encrypted block devices", - .mhandler.cmd = hmp_block_passwd, + .cmd = hmp_block_passwd, }, STEXI @@ -1604,7 +1604,7 @@ ETEXI .args_type = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l", .params = "device bps bps_rd bps_wr iops iops_rd iops_wr", .help = "change I/O throttle limits for a block drive", - .mhandler.cmd = hmp_block_set_io_throttle, + .cmd = hmp_block_set_io_throttle, }, STEXI @@ -1618,7 +1618,7 @@ ETEXI .args_type = "protocol:s,password:s,connected:s?", .params = "protocol password action-if-connected", .help = "set spice/vnc password", - .mhandler.cmd = hmp_set_password, + .cmd = hmp_set_password, }, STEXI @@ -1637,7 +1637,7 @@ ETEXI .args_type = "protocol:s,time:s", .params = "protocol time", .help = "set spice/vnc password expire-time", - .mhandler.cmd = hmp_expire_password, + .cmd = hmp_expire_password, }, STEXI @@ -1668,7 +1668,7 @@ ETEXI .args_type = "args:s", .params = "args", .help = "add chardev", - .mhandler.cmd = hmp_chardev_add, + .cmd = hmp_chardev_add, .command_completion = chardev_add_completion, }, @@ -1684,7 +1684,7 @@ ETEXI .args_type = "id:s", .params = "id", .help = "remove chardev", - .mhandler.cmd = hmp_chardev_remove, + .cmd = hmp_chardev_remove, .command_completion = chardev_remove_completion, }, @@ -1700,7 +1700,7 @@ ETEXI .args_type = "device:B,command:s", .params = "[device] \"[command]\"", .help = "run a qemu-io command on a block device", - .mhandler.cmd = hmp_qemu_io, + .cmd = hmp_qemu_io, }, STEXI @@ -1715,7 +1715,7 @@ ETEXI .args_type = "id:i", .params = "id", .help = "add cpu", - .mhandler.cmd = hmp_cpu_add, + .cmd = hmp_cpu_add, }, STEXI @@ -1729,7 +1729,7 @@ ETEXI .args_type = "path:s?", .params = "path", .help = "list QOM properties", - .mhandler.cmd = hmp_qom_list, + .cmd = hmp_qom_list, }, STEXI @@ -1742,7 +1742,7 @@ ETEXI .args_type = "path:s,property:s,value:s", .params = "path property value", .help = "set QOM property", - .mhandler.cmd = hmp_qom_set, + .cmd = hmp_qom_set, }, STEXI @@ -1755,8 +1755,8 @@ ETEXI .args_type = "item:s?", .params = "[subcommand]", .help = "show various information about the system state", - .mhandler.cmd = hmp_info_help, - .sub_table = info_cmds, + .cmd = hmp_info_help, + .sub_table = info_cmds, }, STEXI -- cgit v1.2.3