From c29c1dd312f39ec18a3c6177c6da09a75e095d70 Mon Sep 17 00:00:00 2001 From: Fam Zheng Date: Thu, 18 Dec 2014 18:37:05 +0800 Subject: qmp: Add command 'blockdev-backup' Similar to drive-backup, but this command uses a device id as target instead of creating/opening an image file. Also add blocker on target bs, since the target is also a named device now. Add check and report error for bs == target which became possible but is an illegal case with introduction of blockdev-backup. Signed-off-by: Fam Zheng Reviewed-by: Max Reitz Reviewed-by: John Snow Reviewed-by: Markus Armbruster Message-id: 1418899027-8445-3-git-send-email-famz@redhat.com Signed-off-by: Max Reitz --- block/backup.c | 28 +++++++++++++++++++++++++++ blockdev.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++++++++ qapi/block-core.json | 54 ++++++++++++++++++++++++++++++++++++++++++++++++++++ qmp-commands.hx | 42 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 178 insertions(+) diff --git a/block/backup.c b/block/backup.c index 792e65514b..1c535b1ab9 100644 --- a/block/backup.c +++ b/block/backup.c @@ -360,6 +360,7 @@ static void coroutine_fn backup_run(void *opaque) hbitmap_free(job->bitmap); bdrv_iostatus_disable(target); + bdrv_op_unblock_all(target, job->common.blocker); data = g_malloc(sizeof(*data)); data->ret = ret; @@ -379,6 +380,11 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target, assert(target); assert(cb); + if (bs == target) { + error_setg(errp, "Source and target cannot be the same"); + return; + } + if ((on_source_error == BLOCKDEV_ON_ERROR_STOP || on_source_error == BLOCKDEV_ON_ERROR_ENOSPC) && !bdrv_iostatus_is_enabled(bs)) { @@ -386,6 +392,26 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target, return; } + if (!bdrv_is_inserted(bs)) { + error_setg(errp, "Device is not inserted: %s", + bdrv_get_device_name(bs)); + return; + } + + if (!bdrv_is_inserted(target)) { + error_setg(errp, "Device is not inserted: %s", + bdrv_get_device_name(target)); + return; + } + + if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) { + return; + } + + if (bdrv_op_is_blocked(target, BLOCK_OP_TYPE_BACKUP_TARGET, errp)) { + return; + } + len = bdrv_getlength(bs); if (len < 0) { error_setg_errno(errp, -len, "unable to get length for '%s'", @@ -399,6 +425,8 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target, return; } + bdrv_op_block_all(target, job->common.blocker); + job->on_source_error = on_source_error; job->on_target_error = on_target_error; job->target = target; diff --git a/blockdev.c b/blockdev.c index 5651a8e140..d6ccc5ebca 100644 --- a/blockdev.c +++ b/blockdev.c @@ -2240,6 +2240,8 @@ void qmp_drive_backup(const char *device, const char *target, aio_context = bdrv_get_aio_context(bs); aio_context_acquire(aio_context); + /* Although backup_run has this check too, we need to use bs->drv below, so + * do an early check redundantly. */ if (!bdrv_is_inserted(bs)) { error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, device); goto out; @@ -2256,6 +2258,7 @@ void qmp_drive_backup(const char *device, const char *target, } } + /* Early check to avoid creating target */ if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) { goto out; } @@ -2323,6 +2326,57 @@ BlockDeviceInfoList *qmp_query_named_block_nodes(Error **errp) return bdrv_named_nodes_list(); } +void qmp_blockdev_backup(const char *device, const char *target, + enum MirrorSyncMode sync, + bool has_speed, int64_t speed, + bool has_on_source_error, + BlockdevOnError on_source_error, + bool has_on_target_error, + BlockdevOnError on_target_error, + Error **errp) +{ + BlockDriverState *bs; + BlockDriverState *target_bs; + Error *local_err = NULL; + AioContext *aio_context; + + if (!has_speed) { + speed = 0; + } + if (!has_on_source_error) { + on_source_error = BLOCKDEV_ON_ERROR_REPORT; + } + if (!has_on_target_error) { + on_target_error = BLOCKDEV_ON_ERROR_REPORT; + } + + bs = bdrv_find(device); + if (!bs) { + error_set(errp, QERR_DEVICE_NOT_FOUND, device); + return; + } + + aio_context = bdrv_get_aio_context(bs); + aio_context_acquire(aio_context); + + target_bs = bdrv_find(target); + if (!target_bs) { + error_set(errp, QERR_DEVICE_NOT_FOUND, target); + goto out; + } + + bdrv_ref(target_bs); + bdrv_set_aio_context(target_bs, aio_context); + backup_start(bs, target_bs, speed, sync, on_source_error, on_target_error, + block_job_cb, bs, &local_err); + if (local_err != NULL) { + bdrv_unref(target_bs); + error_propagate(errp, local_err); + } +out: + aio_context_release(aio_context); +} + #define DEFAULT_MIRROR_BUF_SIZE (10 << 20) void qmp_drive_mirror(const char *device, const char *target, diff --git a/qapi/block-core.json b/qapi/block-core.json index 2d8bd253a7..80984d1660 100644 --- a/qapi/block-core.json +++ b/qapi/block-core.json @@ -702,6 +702,41 @@ '*on-source-error': 'BlockdevOnError', '*on-target-error': 'BlockdevOnError' } } +## +# @BlockdevBackup +# +# @device: the name of the device which should be copied. +# +# @target: the name of the backup target device. +# +# @sync: what parts of the disk image should be copied to the destination +# (all the disk, only the sectors allocated in the topmost image, or +# only new I/O). +# +# @speed: #optional the maximum speed, in bytes per second. The default is 0, +# for unlimited. +# +# @on-source-error: #optional the action to take on an error on the source, +# default 'report'. 'stop' and 'enospc' can only be used +# if the block device supports io-status (see BlockInfo). +# +# @on-target-error: #optional the action to take on an error on the target, +# default 'report' (no limitations, since this applies to +# a different block device than @device). +# +# Note that @on-source-error and @on-target-error only affect background I/O. +# If an error occurs during a guest write request, the device's rerror/werror +# actions will be used. +# +# Since: 2.3 +## +{ 'type': 'BlockdevBackup', + 'data': { 'device': 'str', 'target': 'str', + 'sync': 'MirrorSyncMode', + '*speed': 'int', + '*on-source-error': 'BlockdevOnError', + '*on-target-error': 'BlockdevOnError' } } + ## # @blockdev-snapshot-sync # @@ -821,6 +856,25 @@ ## { 'command': 'drive-backup', 'data': 'DriveBackup' } +## +# @blockdev-backup +# +# Start a point-in-time copy of a block device to a new destination. The +# status of ongoing blockdev-backup operations can be checked with +# query-block-jobs where the BlockJobInfo.type field has the value 'backup'. +# The operation can be stopped before it has completed using the +# block-job-cancel command. +# +# For the arguments, see the documentation of BlockdevBackup. +# +# Returns: Nothing on success. +# If @device or @target is not a valid block device, DeviceNotFound. +# +# Since 2.3 +## +{ 'command': 'blockdev-backup', 'data': 'BlockdevBackup' } + + ## # @query-named-block-nodes # diff --git a/qmp-commands.hx b/qmp-commands.hx index 6945d30198..8957201f73 100644 --- a/qmp-commands.hx +++ b/qmp-commands.hx @@ -1094,6 +1094,48 @@ Example: "sync": "full", "target": "backup.img" } } <- { "return": {} } + +EQMP + + { + .name = "blockdev-backup", + .args_type = "sync:s,device:B,target:B,speed:i?," + "on-source-error:s?,on-target-error:s?", + .mhandler.cmd_new = qmp_marshal_input_blockdev_backup, + }, + +SQMP +blockdev-backup +--------------- + +The device version of drive-backup: this command takes an existing named device +as backup target. + +Arguments: + +- "device": the name of the device which should be copied. + (json-string) +- "target": the name of the backup target device. (json-string) +- "sync": what parts of the disk image should be copied to the destination; + possibilities include "full" for all the disk, "top" for only the + sectors allocated in the topmost image, or "none" to only replicate + new I/O (MirrorSyncMode). +- "speed": the maximum speed, in bytes per second (json-int, optional) +- "on-source-error": the action to take on an error on the source, default + 'report'. 'stop' and 'enospc' can only be used + if the block device supports io-status. + (BlockdevOnError, optional) +- "on-target-error": the action to take on an error on the target, default + 'report' (no limitations, since this applies to + a different block device than device). + (BlockdevOnError, optional) + +Example: +-> { "execute": "blockdev-backup", "arguments": { "device": "src-id", + "sync": "full", + "target": "tgt-id" } } +<- { "return": {} } + EQMP { -- cgit v1.2.3